Incorrectly shifted relocation address will cause a lower memory
corruption and likely a hang on a write or a read of an arbitrary data
in case of IOMMU absence. As of now, there is no known use for the
address shifting and adding a proper shifts / sizes validation is a much
more work. Let's forbid shifts in the firewall till a proper validation
is implemented.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Perform gathers coping before patching them, so that original gathers are
left untouched. That's not as bad as leaking kernel addresses, but still
doesn't feel right.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In case of relocations / waitchecks patching failure the jobs pins stay
referenced till DRM file get closed, wasting memory. Add the missed
unpinning.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The commands stream is prepended by the jobs class on the CDMA
submission, so that explicitly setting a module class in the commands
stream isn't necessary. The firewall initializes its class to 0 and the
command stream that doesn't explicitly specify the class effectively
bypasses the firewall.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra20 if plane has width or height equal to 0, it will be infinitely
wide or tall. Let's disable the plane if it is invisible on atomic state
committing to fix the issue. The Rockchip DRM driver does the same.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra20 an overlay plane should be clipped, otherwise its output is
distorted once plane crosses display boundary.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pass down the correct acquire context to the pipe A quirk load detect
hack during display resume. Avoids deadlocking the entire thing.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: e2c8b8701e ("drm/i915: Use atomic helpers for suspend, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170601143619.27840-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Commit 33a8eb8d40 ("drm/tegra: dc: Implement runtime PM") introduced
HW reset control. It causes a hang on Tegra20 if both display
controllers are utilized (RGB panel and HDMI). The TRM suggests that
each display controller has its own reset control, apparently it is not
correct.
Fixes: 33a8eb8d40 ("drm/tegra: dc: Implement runtime PM")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In case of invalid syncpoint ID, the host1x_syncpt_get() returns NULL and
none of its users perform a check of the returned pointer later. Let's bail
out until it's too late.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The waitchecks along with multiple syncpoints per submit are not ready
for use yet, let's forbid them for now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If commands buffer claims a number of words that is higher than its BO can
fit, a kernel OOPS will be fired on the out-of-bounds BO access. This was
triggered by an opentegra Xorg driver that erroneously pushed too many
commands to the pushbuf.
The CDMA commands buffer address is 4 bytes aligned, so check its
alignment.
The maximum number of the CDMA gather fetches is 16383, add a check for
it.
Add a sanity check for the relocations in a same way.
[ 46.829393] Unable to handle kernel paging request at virtual address f09b2000
...
[<c04a3ba4>] (host1x_job_pin) from [<c04dfcd0>] (tegra_drm_submit+0x474/0x510)
[<c04dfcd0>] (tegra_drm_submit) from [<c04deea0>] (tegra_submit+0x50/0x6c)
[<c04deea0>] (tegra_submit) from [<c04c07c0>] (drm_ioctl+0x1e4/0x3ec)
[<c04c07c0>] (drm_ioctl) from [<c02541a0>] (do_vfs_ioctl+0x9c/0x8e4)
[<c02541a0>] (do_vfs_ioctl) from [<c0254a1c>] (SyS_ioctl+0x34/0x5c)
[<c0254a1c>] (SyS_ioctl) from [<c0107640>] (ret_fast_syscall+0x0/0x3c)
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Adds some driver documentation for Tegra. It provides a short overview
of the hardware and software architectures.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Improve kerneldoc for the public parts of the host1x infrastructure in
preparation for adding driver-specific part to the GPU documentation.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently the vma has one link member that is used for both holding its
place in the execbuf reservation list, and in any eviction list. This
dual property is quite tricky and error prone.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170615081435.17699-3-chris@chris-wilson.co.uk
This has the benefit of not requiring us to manipulate the
vma->exec_link list when tearing down the execbuffer, and is a
marginally cheaper test to detect the user error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170615081435.17699-2-chris@chris-wilson.co.uk
Add OA support for Kabylake (pretty much identical to Skylake), and
also add the associated OA configurations.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Add macros to detect GT2/GT3 skus so we can apply the proper OA
configuration later.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
In earlier iterations of the i915-perf driver we had a number of
callbacks/hooks from other parts of the i915 driver to e.g. notify us
when a legacy context was pinned and these could run asynchronously with
respect to the stream file operations and might also run in atomic
context.
dev_priv->perf.hook_lock had been for serialising access to state needed
within these callbacks, but as the code has evolved some of the hooks
have gone away or are implemented to avoid needing to lock any state.
The remaining use of this lock was actually redundant considering how
the gen7 oacontrol state used to be updated as part of a context pin
hook.
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
An oa_exponent_to_ns() utility and per-gen timebase constants where
recently removed when updating the tail pointer race condition WA, and
this restores those so we can update the _PROP_OA_EXPONENT validation
done in read_properties_unlocked() to not assume we have a 12.5MHz
timebase as we did for Haswell.
Accordingly the oa_sample_rate_hard_limit value that's referenced by
proc_dointvec_minmax defining the absolute limit for the OA sampling
frequency is now initialized to (timestamp_frequency / 2) instead of the
6.25MHz constant for Haswell.
v2:
Specify frequency of 19.2MHz for BXT (Ville)
Initialize oa_sample_rate_hard_limit per-gen too (Lionel)
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
These are auto generated from an XML description of metric sets,
currently maintained in gputop, ref:
https://github.com/rib/gputop
> gputop-data/oa-*.xml
> scripts/i915-perf-kernelgen.py
$ make -C gputop-data -f Makefile.xml
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Enables access to OA unit metrics for BDW, CHV, SKL and BXT which all
share (more-or-less) the same OA unit design.
Of particular note in comparison to Haswell: some OA unit HW config
state has become per-context state and as a consequence it is somewhat
more complicated to manage synchronous state changes from the cpu while
there's no guarantee of what context (if any) is currently actively
running on the gpu.
The periodic sampling frequency which can be particularly useful for
system-wide analysis (as opposed to command stream synchronised
MI_REPORT_PERF_COUNT commands) is perhaps the most surprising state to
have become per-context save and restored (while the OABUFFER
destination is still a shared, system-wide resource).
This support for gen8+ takes care to consider a number of timing
challenges involved in synchronously updating per-context state
primarily by programming all config state from the cpu and updating all
current and saved contexts synchronously while the OA unit is still
disabled.
The driver intentionally avoids depending on command streamer
programming to update OA state considering the lack of synchronization
between the automatic loading of OACTXCONTROL state (that includes the
periodic sampling state and enable state) on context restore and the
parsing of any general purpose BB the driver can control. I.e. this
implementation is careful to avoid the possibility of a context restore
temporarily enabling any out-of-date periodic sampling state. In
addition to the risk of transiently-out-of-date state being loaded
automatically; there are also internal HW latencies involved in the
loading of MUX configurations which would be difficult to account for
from the command streamer (and we only want to enable the unit when once
the MUX configuration is complete).
Since the Gen8+ OA unit design no longer supports clock gating the unit
off for a single given context (which effectively stopped any progress
of counters while any other context was running) and instead supports
tagging OA reports with a context ID for filtering on the CPU, it means
we can no longer hide the system-wide progress of counters from a
non-privileged application only interested in metrics for its own
context. Although we could theoretically try and subtract the progress
of other contexts before forwarding reports via read() we aren't in a
position to filter reports captured via MI_REPORT_PERF_COUNT commands.
As a result, for Gen8+, we always require the
dev.i915.perf_stream_paranoid to be unset for any access to OA metrics
if not root.
v5: Drain submitted requests when enabling metric set to ensure no
lite-restore erases the context image we just updated (Lionel)
v6: In addition to drain, switch to kernel context & update all
context in place (Chris)
v7: Add missing mutex_unlock() if switching to kernel context fails
(Matthew)
v8: Simplify OA period/flex-eu-counters programming by using the
batchbuffer instead of modifying ctx-image (Lionel)
v9: Back to updating the context image (due to erroneous testing,
batchbuffer programming the OA unit doesn't actually work)
(Lionel)
Pin context before updating context image (Chris)
Drop MMIO programming now that we switch to a kernel context with
right values in initial context image (Chris)
v10: Just pin_map the contexts we want to modify or let the
configuration happen on first use (Chris)
v11: Update kernel context OA config through the batchbuffer rather
than on the fly ctx-image update (Lionel)
v12: Rework OA context registers update again by swithing away from
user contexts and reconfiguring the kernel context through the
batchbuffer and updating all the other contexts' context image.
Also take care to lock slice/subslice configuration when OA is
on. (Lionel)
v13: Request rpcs updates on all engine when updating the OA config
(Lionel)
v14: Drop any kind of rpcs management now that we monitor sseu
configuration changes in a later patch (Lionel)
Remove usleep after programming the NOA configs on Gen8+, this
doesn't seem to be needed (Lionel)
v15: Respect coding style for block comments (Chris)
v16: Add missing i915_add_request() in case we fail to emit OA
configuration (Matthew)
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com> \o/
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Adds a static OA unit, MUX, B Counter + Flex EU configurations for basic
render metrics on Broadwell, Cherryview, Skylake and Broxton. These are
auto generated from an XML description of metric sets, currently
maintained in gputop, ref:
https://github.com/rib/gputop
> gputop-data/oa-*.xml
> scripts/i915-perf-kernelgen.py
$ make -C gputop-data -f Makefile.xml WHITELIST=RenderBasic
v2: add newlines to debug messages + fix comment (Matthew Auld)
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Gen8+ might have mux configurations per slices/subslices. Depending on
whether slices/subslices have been fused off, only part of the
configuration needs to be applied. This change reworks the mux
configurations query mechanism to allow more than one set of registers
to be programmed.
v2: s/n_mux_regs/n_mux_configs/ (Matthew)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Assuming a uniform mask across all slices, this enables userspace to
determine the specific sub slices can be enabled. This information is
required, for example, to be able to analyse some OA counter reports
where the counter configuration depends on the HW sub slice
configuration.
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Enables userspace to determine the maximum number of slices that can
be enabled on the device and also know what specific slices can be
enabled. This information is required, for example, to be able to
analyse some OA counter reports where the counter configuration
depends on the HW slice configuration.
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
This patch supports TM2e panel and the panel has 1600x2560 resolution
in 5.65" physical.
This identify panel type with compatibility string, also invoke
display mode that matches the type. So add the check code for s6e3ha2
compatibility and s6e3hf2 type and select the drm_display_mode of
default and edge type.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
[treding@nvidia.com: fixup checkpatch warnings]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492504836-19225-3-git-send-email-hoegeun.kwon@samsung.com
The samsung s6e3hf2 panel is a 5.65" 1600x2560 AMOLED panel connected
using MIPI-DSI interfaces.
The s6e3hf2 is add to samsung,s6e3ha2.txt binding because it is a
panel similar to the s6e3ha2. So add the compatible string and
comments.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492504836-19225-2-git-send-email-hoegeun.kwon@samsung.com
Without the dependency, we run into a link error:
drivers/gpu/drm/panel/panel-sitronix-st7789v.o: In function `st7789v_probe':
panel-sitronix-st7789v.c:(.text.st7789v_probe+0xc0): undefined reference to `of_find_backlight_by_node'
Fixes: 7142afb3a1 ("drm/panel: Add driver for sitronix ST7789V LCD controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419180326.303994-1-arnd@arndb.de
The new S6E3HA2 driver fails to link when backlight is disabled:
ERROR: "backlight_device_register" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined!
ERROR: "backlight_device_unregister" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined!
This adds a Kconfig dependency like we have it for some other panel drivers.
Fixes: ed29f9426d ("drm/panel: Add support for S6E3HA2 panel driver on TM2 board")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419175939.189098-2-arnd@arndb.de
This adds support for the AU Optronics Corporation 31.5"
FHD (1920x1080) LVDS TFT LCD panel, which can be supported
by the simple panel driver
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-4-l.stach@pengutronix.de
This adds support for the NLT Technologies NL192108AC18-02D
15.6" LVDS FullHD TFT LCD panel, which can be supported
by the simple panel driver.
Timings are taken from the preliminary datasheet, as a final
one is not yet available.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-3-l.stach@pengutronix.de
NLT technologies is the former NEC display business, but changed its
name to NLT Technologies when forming a joint venture with
Shenzhen AVIC OPTOELECTRONICS, Ltd.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-2-l.stach@pengutronix.de
The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
connected to DSI using four lanes.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490316692-20506-1-git-send-email-zyw@rock-chips.com
I removed the zapping of the reservation_object->fence array of shared
fences prematurely. We don't yet have the code to zap that array when
retiring the object, and so currently it remains possible to continually
grow the shared array trapping requests when reusing the batch_pool
object across many timelines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518094638.5469-4-chris@chris-wilson.co.uk
Having resolved whether or not we would deadlock upon a call to
mutex_lock(&dev->struct_mutex), we can then spin for the contended
struct_mutex if we are not the owner. We cannot afford to simply block
and wait for the mutex, as the owner may itself be waiting for the
allocator -- i.e. a cyclic deadlock. This should significantly improve
the chance of running the shrinker for other processes whilst the GPU is
busy.
A more balanced approach would be to optimistically spin whilst the
mutex owner was on the cpu and there was an opportunity to acquire the
mutex for ourselves quickly. However, that requires support from
kernel/locking/ and a new mutex_spin_trylock() primitive.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-4-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In our first pass, we do not want to use reclaim at all as we want to
solely reap the i915 buffer caches (its purgeable pages). But we don't
mind it initiates IO or pulls via the FS (but it shouldn't anyway as we
say no to reclaim!). Just drop the GFP_IO constraint for simplicity.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
I tried __GFP_NORETRY in the belief that __GFP_RECLAIM was effective. It
struggles with handling reclaim of our dirty buffers and relies on
reclaim via kswapd. As a result, a single pass of direct reclaim is
unreliable when i915 occupies the majority of available memory, and the
only means of effectively waiting on kswapd to amke progress is by not
setting the __GFP_NORETRY flag and lopping. That leaves us with the
dilemma of invoking the oomkiller instead of propagating the allocation
failure back to userspace where it can be handled more gracefully (one
hopes). In the future we may have __GFP_MAYFAIL to allow repeats up until
we genuinely run out of memory and the oomkiller would have been invoked.
Until then, let the oomkiller wreck havoc.
v2: Stop playing with side-effects of gfp flags and await __GFP_MAYFAIL
v3: Update comments that direct reclaim only appears to be ignoring our
dirty buffers!
Fixes: 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Testcase: igt/gem_tiled_swapping
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Commit 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than
incur the oom for gfx allocations") made the bold decision to try and
avoid the oomkiller by reporting -ENOMEM to userspace if our allocation
failed after attempting to free enough buffer objects. In short, it
appears we were giving up too easily (even before we start wondering if
one pass of reclaim is as strong as we would like). Part of the problem
is that if we only shrink just enough pages for our expected allocation,
the likelihood of those pages becoming available to us is less than 100%
To counter-act that we ask for twice the number of pages to be made
available. Furthermore, we allow the shrinker to pull pages from the
active list in later passes.
v2: Be a little more cautious in paging out gfx buffers, and leave that
to a more balanced approach from shrink_slab(). Important when combined
with "drm/i915: Start writeback from the shrinker" as anything shrunk is
immediately swapped out and so should be more conservative.
Fixes: 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-1-chris@chris-wilson.co.uk
This interface allows importing the fence from a sync_file into
an existing drm sync object, or exporting the fence attached to
an existing drm sync object into a new sync file object.
This should only be used to interact with sync files where necessary.
v1.1: fence put fixes (Chris), drop fence from ioctl names (Chris)
fixup for new fence replace API.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sync objects are new toplevel drm object, that contain a
pointer to a fence. This fence can be updated via command
submission ioctls via drivers.
There is also a generic wait obj API modelled on the vulkan
wait API (with code modelled on some amdgpu code).
These objects can be converted to an opaque fd that can be
passes between processes.
v2: rename reference/unreference to put/get (Chris)
fix leaked reference (David Zhou)
drop mutex in favour of cmpxchg (Chris)
v3: cleanups from danvet, rebase on drm_fops rename
check fd_flags is 0 in ioctls.
v4: export find/free, change replace fence to take a
syncobj. In order to support lookup first, replace
later semantics which seem in the end to be cleaner.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If one 'drm_gem_handle_create()' fails, we leak somes handles and some
memory.
In order to fix it:
- move the 'free(bo_state)' at the end of the function so that it is also
called in the eror handling path. This has the side effect to also try
to free it if the first 'kcalloc' fails. This is harmless.
- add a new label, err_delete_handle, in order to delete already
allocated handles in error handling path
- remove the now useless 'err' label
The way the code is now written will also delete the handles if the
'copy_to_user()' call fails.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170512123803.1886-1-christophe.jaillet@wanadoo.fr
The bo->resv pointer could be NULL, leading to kernel oopses
like the one below.
This patch ensures that bo->resv is always set in vc4_create_object
ensuring that it is never NULL.
Thanks to Eric Anholt for pointing to the correct solution.
[ 19.738487] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 19.746805] pgd = ffff8000275fc000
[ 19.750319] [00000000] *pgd=0000000000000000
[ 19.754715] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 19.760369] Modules linked in: smsc95xx usbnet vc4 drm_kms_helper drm pwm_bcm2835 i2c_bcm2835 bcm2835_rng rng_core bcm2835_dma virt_dma
[ 19.772767] CPU: 0 PID: 1297 Comm: Xorg Not tainted 4.12.0-rc1-rpi3 #58
[ 19.779476] Hardware name: Raspberry Pi 3 Model B (DT)
[ 19.784688] task: ffff800028268000 task.stack: ffff800026c08000
[ 19.790705] PC is at ww_mutex_lock_interruptible+0x14/0xc0
[ 19.796329] LR is at vc4_submit_cl_ioctl+0x4fc/0x998 [vc4]
...
[ 20.240855] [<ffff0000088975f4>] ww_mutex_lock_interruptible+0x14/0xc0
[ 20.247528] [<ffff0000009b3ea4>] vc4_submit_cl_ioctl+0x4fc/0x998 [vc4]
[ 20.254372] [<ffff0000008f75f8>] drm_ioctl+0x180/0x438 [drm]
[ 20.260120] [<ffff00000821383c>] do_vfs_ioctl+0xa4/0x7d0
[ 20.265510] [<ffff000008213fe4>] SyS_ioctl+0x7c/0x98
[ 20.270550] [<ffff000008082f30>] el0_svc_naked+0x24/0x28
[ 20.275941] Code: d2800002 d5384103 910003fd f9800011 (c85ffc04)
[ 20.282527] ---[ end trace 1f6bd640ff32ae12 ]---
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/14e68768-6c92-2d74-92fd-196dbc50d8f7@xs4all.nl
All here is pretty much like Kabylake.
Including CFL-U has to use same ddi translation table
as KBL-U for now.
v2: Include missed IS_COFFEELAKE on edp trans table. (DK)
Handle CFL-U with same translation table as KBL-U. (DK and
confirmed with HW engineers)
v3: Adding missed case for IS_CFL_ULT. (DK).
v4: Duh! Now with the real IS_CFL_ULT instead of KBL one. (DK)
Also use IS_GEN9_BC when possible. (DK)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497045770-21302-1-git-send-email-rodrigo.vivi@intel.com
Enable wrpll computation for Cannonlake platform to support
pll's required for HDMI output. The patch contains the following features
- compute Cannonlake port clock programming
dividers P, Q, and K.
- compute PLL parameters for Cannonlake. These parameters
set the values on DPLL registers.
- find the register values to program wrpll for Cannonlake.
The reference clock can be either 19.2MHz or 24MHz.
v2: rebase
v3: squash wrpll patches into one (Rodrigo)
v4: switch order of getting even dividers (Paulo)
update divider register values for PDiv and KDiv (Paulo)
update wrpll computation algorithm (Paulo)
v5: Remove ref clock division by 1000. (Rodrigo)
v6: Rodrigo rebasing on top of latest code.
Signed-off-by: Kahola, Mika <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-18-git-send-email-rodrigo.vivi@intel.com
Dmitry Osipenko