Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXSMhUgAKCRCRxhvAZXjc
okkiAQC3Hlg/O2JoIb4PqgEvBkpHSdVxyuWagn0ksjACW9ANKQEAl5OadMhvOq16
UHGhKlpE/M8HflknIffoEGlIAWHrdwU=
=7kP5
-----END PGP SIGNATURE-----
Merge tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner:
"This adds two main features.
- First, it adds polling support for pidfds. This allows process
managers to know when a (non-parent) process dies in a race-free
way.
The notification mechanism used follows the same logic that is
currently used when the parent of a task is notified of a child's
death. With this patchset it is possible to put pidfds in an
{e}poll loop and get reliable notifications for process (i.e.
thread-group) exit.
- The second feature compliments the first one by making it possible
to retrieve pollable pidfds for processes that were not created
using CLONE_PIDFD.
A lot of processes get created with traditional PID-based calls
such as fork() or clone() (without CLONE_PIDFD). For these
processes a caller can currently not create a pollable pidfd. This
is a problem for Android's low memory killer (LMK) and service
managers such as systemd.
Both patchsets are accompanied by selftests.
It's perhaps worth noting that the work done so far and the work done
in this branch for pidfd_open() and polling support do already see
some adoption:
- Android is in the process of backporting this work to all their LTS
kernels [1]
- Service managers make use of pidfd_send_signal but will need to
wait until we enable waiting on pidfds for full adoption.
- And projects I maintain make use of both pidfd_send_signal and
CLONE_PIDFD [2] and will use polling support and pidfd_open() too"
[1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22
[2] aab6e3eb73/src/lxc/start.c (L1753)
* tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add pidfd_open() tests
arch: wire-up pidfd_open()
pid: add pidfd_open()
pidfd: add polling selftests
pidfd: add polling support
The scapyPlugin allows for simple traffic generation in tdc to
test various tc features. It was tested with scapy v2.4.2, but
should work with any successive version.
In order to use the plugin's functionality, scapy must be
installed. This can be done with:
pip3 install scapy
or to install 2.4.2:
pip3 install scapy==2.4.2
If the plugin is unable to import the scapy module, it will
terminate the tdc run.
The plugin makes use of a new key in the test case data, 'scapy'.
This block contains three other elements: 'iface', 'count', and
'packet':
"scapy": {
"iface": "$DEV0",
"count": 1,
"packet": "Ether(type=0x800)/IP(src='16.61.16.61')/ICMP()"
},
* iface is the name of the device on the host machine from which
the packet(s) will be sent. Values contained within tdc_config.py's
NAMES dict can be used here - this is useful if paired with
nsPlugin
* count is the number of copies of this packet to be sent
* packet is a string detailing the different layers of the packet
to be sent. If a property isn't explicitly set, scapy will set
default values for you.
Layers in the packet info are separated by slashes. For info about
common TCP and IP properties, see:
https://blogs.sans.org/pen-testing/files/2016/04/ScapyCheatSheet_v0.2.pdf
Caution is advised when running tests using the scapy functionality,
since the plugin blindly sends the packet as defined in the test case
data.
See creating-testcases/scapy-example.json for sample test cases;
the first test is intended to pass while the second is intended to
fail.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of only passing the test case name and ID, pass the
entire current test case down to the plugins. This change
allows plugins to start accepting commands and directives
from the test cases themselves, for greater flexibility
in testing.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with other
trees, unfortunately. He has a lot more of these waiting on the wings
that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos, and one
on Spectre vulnerabilities.
- Various improvements to the build system, including automatic markup of
function() references because some people, for reasons I will never
understand, were of the opinion that :c:func:``function()`` is
unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
=D0eO
-----END PGP SIGNATURE-----
Merge tag 'docs-5.3' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with
other trees, unfortunately. He has a lot more of these waiting on
the wings that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos,
and one on Spectre vulnerabilities.
- Various improvements to the build system, including automatic
markup of function() references because some people, for reasons I
will never understand, were of the opinion that
:c:func:``function()`` is unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc"
* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
docs: automarkup.py: ignore exceptions when seeking for xrefs
docs: Move binderfs to admin-guide
Disable Sphinx SmartyPants in HTML output
doc: RCU callback locks need only _bh, not necessarily _irq
docs: format kernel-parameters -- as code
Doc : doc-guide : Fix a typo
platform: x86: get rid of a non-existent document
Add the RCU docs to the core-api manual
Documentation: RCU: Add TOC tree hooks
Documentation: RCU: Rename txt files to rst
Documentation: RCU: Convert RCU UP systems to reST
Documentation: RCU: Convert RCU linked list to reST
Documentation: RCU: Convert RCU basic concepts to reST
docs: filesystems: Remove uneeded .rst extension on toctables
scripts/sphinx-pre-install: fix out-of-tree build
docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
Documentation: PGP: update for newer HW devices
Documentation: Add section about CPU vulnerabilities for Spectre
Documentation: platform: Delete x86-laptop-drivers.txt
docs: Note that :c:func: should no longer be used
...
Add 13 tests ensuring the command line is doing what is supposed to do.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new series of selftests to verify the functionality of act_mpls in
TC.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-07-09
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Lots of libbpf improvements: i) addition of new APIs to attach BPF
programs to tracing entities such as {k,u}probes or tracepoints,
ii) improve specification of BTF-defined maps by eliminating the
need for data initialization for some of the members, iii) addition
of a high-level API for setting up and polling perf buffers for
BPF event output helpers, all from Andrii.
2) Add "prog run" subcommand to bpftool in order to test-run programs
through the kernel testing infrastructure of BPF, from Quentin.
3) Improve verifier for BPF sockaddr programs to support 8-byte stores
for user_ip6 and msg_src_ip6 members given clang tends to generate
such stores, from Stanislav.
4) Enable the new BPF JIT zero-extension optimization for further
riscv64 ALU ops, from Luke.
5) Fix a bpftool json JIT dump crash on powerpc, from Jiri.
6) Fix an AF_XDP race in generic XDP's receive path, from Ilya.
7) Various smaller fixes from Ilya, Yue and Arnd.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add selftest scripts for multipath hashing on inner IP pkts when there
is a single GRE tunnel but there are multiple underlay routes to reach
the other end of the tunnel.
Four cases are covered in these scripts:
- IPv4 inner, IPv4 outer
- IPv6 inner, IPv4 outer
- IPv4 inner, IPv6 outer
- IPv6 inner, IPv6 outer
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix endianness issue: passing a pointer to 64-bit fd as a 32-bit key
does not work on big-endian architectures. So cast fd to 32-bits when
necessary.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull RCU updates from Ingo Molnar:
"The changes in this cycle are:
- RCU flavor consolidation cleanups and optmizations
- Documentation updates
- Miscellaneous fixes
- SRCU updates
- RCU-sync flavor consolidation
- Torture-test updates
- Linux-kernel memory-consistency-model updates, most notably the
addition of plain C-language accesses"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
tools/memory-model: Improve data-race detection
tools/memory-model: Change definition of rcu-fence
tools/memory-model: Expand definition of barrier
tools/memory-model: Do not use "herd" to refer to "herd7"
tools/memory-model: Fix comment in MP+poonceonces.litmus
Documentation: atomic_t.txt: Explain ordering provided by smp_mb__{before,after}_atomic()
rcu: Don't return a value from rcu_assign_pointer()
rcu: Force inlining of rcu_read_lock()
rcu: Fix irritating whitespace error in rcu_assign_pointer()
rcu: Upgrade sync_exp_work_done() to smp_mb()
rcutorture: Upper case solves the case of the vanishing NULL pointer
torture: Suppress propagating trace_printk() warning
rcutorture: Dump trace buffer for callback pipe drain failures
torture: Add --trust-make to suppress "make clean"
torture: Make --cpus override idleness calculations
torture: Run kernel build in source directory
torture: Add function graph-tracing cheat sheet
torture: Capture qemu output
rcutorture: Tweak kvm options
rcutorture: Add trivial RCU implementation
...
If mmap() fails it returns MAP_FAILED, which is defined as ((void *) -1).
The current if-statement incorrectly tests if *ring is NULL.
Fixes: 358be65640 ("selftests/net: add txring_overwrite")
Signed-off-by: Frank de Brabander <debrabander@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 CPU feature updates from Thomas Gleixner:
"Updates for x86 CPU features:
- Support for UMWAIT/UMONITOR, which allows to use MWAIT and MONITOR
instructions in user space to save power e.g. in HPC workloads
which spin wait on synchronization points.
The maximum time a MWAIT can halt in userspace is controlled by the
kernel and can be adjusted by the sysadmin.
- Speed up the MTRR handling code on CPUs which support cache
self-snooping correctly.
On those CPUs the wbinvd() invocations can be omitted which speeds
up the MTRR setup by a factor of 50.
- Support for the new x86 vendor Zhaoxin who develops processors
based on the VIA Centaur technology.
- Prevent 'cat /proc/cpuinfo' from affecting isolated NOHZ_FULL CPUs
by sending IPIs to retrieve the CPU frequency and use the cached
values instead.
- The addition and late revert of the FSGSBASE support. The revert
was required as it turned out that the code still has hard to
diagnose issues. Yet another engineering trainwreck...
- Small fixes, cleanups, improvements and the usual new Intel CPU
family/model addons"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
x86/fsgsbase: Revert FSGSBASE support
selftests/x86/fsgsbase: Fix some test case bugs
x86/entry/64: Fix and clean up paranoid_exit
x86/entry/64: Don't compile ignore_sysret if 32-bit emulation is enabled
selftests/x86: Test SYSCALL and SYSENTER manually with TF set
x86/mtrr: Skip cache flushes on CPUs with cache self-snooping
x86/cpu/intel: Clear cache self-snoop capability in CPUs with known errata
Documentation/ABI: Document umwait control sysfs interfaces
x86/umwait: Add sysfs interface to control umwait maximum time
x86/umwait: Add sysfs interface to control umwait C0.2 state
x86/umwait: Initialize umwait control values
x86/cpufeatures: Enumerate user wait instructions
x86/cpu: Disable frequency requests via aperfmperf IPI for nohz_full CPUs
x86/acpi/cstate: Add Zhaoxin processors support for cache flush policy in C3
ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC
x86/cpu: Create Zhaoxin processors architecture support file
x86/cpu: Split Tremont based Atoms from the rest
Documentation/x86/64: Add documentation for GS/FS addressing mode
x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
...
Pull x86 vsyscall updates from Thomas Gleixner:
"Further hardening of the legacy vsyscall by providing support for
execute only mode and switching the default to it.
This prevents a certain class of attacks which rely on the vsyscall
page being accessible at a fixed address in the canonical kernel
address space"
* 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86: Add a test for process_vm_readv() on the vsyscall page
x86/vsyscall: Add __ro_after_init to global variables
x86/vsyscall: Change the default vsyscall mode to xonly
selftests/x86/vsyscall: Verify that vsyscall=none blocks execution
x86/vsyscall: Document odd SIGSEGV error code for vsyscalls
x86/vsyscall: Show something useful on a read fault
x86/vsyscall: Add a new vsyscall=xonly mode
Documentation/admin: Remove the vsyscall=native documentation
Pull timer updates from Thomas Gleixner:
"The timer and timekeeping departement delivers:
Core:
- The consolidation of the VDSO code into a generic library including
the conversion of x86 and ARM64. Conversion of ARM and MIPS are en
route through the relevant maintainer trees and should end up in
5.4.
This gets rid of the unnecessary different copies of the same code
and brings all architectures on the same level of VDSO
functionality.
- Make the NTP user space interface more robust by restricting the
TAI offset to prevent undefined behaviour. Includes a selftest.
- Validate user input in the compat settimeofday() syscall to catch
invalid values which would be turned into valid values by a
multiplication overflow
- Consolidate the time accessors
- Small fixes, improvements and cleanups all over the place
Drivers:
- Support for the NXP system counter, TI davinci timer
- Move the Microsoft HyperV clocksource/events code into the
drivers/clocksource directory so it can be shared between x86 and
ARM64.
- Overhaul of the Tegra driver
- Delay timer support for IXP4xx
- Small fixes, improvements and cleanups as usual"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
time: Validate user input in compat_settimeofday()
timer: Document TIMER_PINNED
clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic
clocksource/drivers: Make Hyper-V clocksource ISA agnostic
MAINTAINERS: Fix Andy's surname and the directory entries of VDSO
hrtimer: Use a bullet for the returns bullet list
arm64: vdso: Fix compilation with clang older than 8
arm64: compat: Fix __arch_get_hw_counter() implementation
arm64: Fix __arch_get_hw_counter() implementation
lib/vdso: Make delta calculation work correctly
MAINTAINERS: Add entry for the generic VDSO library
arm64: compat: No need for pre-ARMv7 barriers on an ARMv8 system
arm64: vdso: Remove unnecessary asm-offsets.c definitions
vdso: Remove superfluous #ifdef __KERNEL__ in vdso/datapage.h
clocksource/drivers/davinci: Add support for clocksource
clocksource/drivers/davinci: Add support for clockevents
clocksource/drivers/tegra: Set up maximum-ticks limit properly
clocksource/drivers/tegra: Cycles can't be 0
clocksource/drivers/tegra: Restore base address before cleanup
clocksource/drivers/tegra: Add verbose definition for 1MHz constant
...
ef99b02b23 ("libbpf: capture value in BTF type info for BTF-defined map
defs") changed BTF-defined maps syntax, while independently merged
1e8611bbdf ("selftests/bpf: add kprobe/uprobe selftests") added new
test using outdated syntax of maps. This patch fixes this test after
corresponding patch sets were merged.
Fixes: ef99b02b23 ("libbpf: capture value in BTF type info for BTF-defined map defs")
Fixes: 1e8611bbdf ("selftests/bpf: add kprobe/uprobe selftests")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make sure that wide stores are allowed at proper (aligned) addresses.
Note that user_ip6 is naturally aligned on 8-byte boundary, so
correct addresses are user_ip6[0] and user_ip6[2]. msg_src_ip6 is,
however, aligned on a 4-byte bondary, so only msg_src_ip6[1]
can be wide-stored.
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add test verifying perf buffer API functionality.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a test which checks if leftover record data in TLS
layer correctly wakes up poll().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Forgot to add it in the original patch.
Fixes: b55873984d ("selftests/bpf: test BPF_SOCK_OPS_RTT_CB")
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 2589726d12 ("bpf: introduce bounded loops") caused a change
in the way some registers liveliness is reported in the test_align.
Add missing "_w" to a couple of tests. Note, there are no offset
changes!
Fixes: 2589726d12 ("bpf: introduce bounded loops")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2019-07-05
1) Fix xfrm selector prefix length validation for
inter address family tunneling.
From Anirudh Gupta.
2) Fix a memleak in pfkey.
From Jeremy Sowden.
3) Fix SA selector validation to allow empty selectors again.
From Nicolas Dichtel.
4) Select crypto ciphers for xfrm_algo, this fixes some
randconfig builds. From Arnd Bergmann.
5) Remove a duplicated assignment in xfrm_bydst_resize.
From Cong Wang.
6) Fix a hlist corruption on hash rebuild.
From Florian Westphal.
7) Fix a memory leak when creating xfrm interfaces.
From Nicolas Dichtel.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert selftests that were originally left out and new ones added
recently to consistently use BTF-defined maps.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Convert all the existing selftests that are already using BTF-defined
maps to use new syntax (with no static data initialization).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add simple __uint and __type macro that hide details of how type and
integer values are captured in BTF-defined maps.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Convert some existing tests that attach to tracepoints to use
bpf_program__attach_tracepoint API instead.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add tests verifying kprobe/kretprobe/uprobe/uretprobe APIs work as
expected.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use new bpf_program__attach_perf_event() in test previously relying on
direct ioctl manipulations.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-07-03
The following pull-request contains BPF updates for your *net-next* tree.
There is a minor merge conflict in mlx5 due to 8960b38932 ("linux/dim:
Rename externally used net_dim members") which has been pulled into your
tree in the meantime, but resolution seems not that bad ... getting current
bpf-next out now before there's coming more on mlx5. ;) I'm Cc'ing Saeed
just so he's aware of the resolution below:
** First conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c:
<<<<<<< HEAD
static int mlx5e_open_cq(struct mlx5e_channel *c,
struct dim_cq_moder moder,
struct mlx5e_cq_param *param,
struct mlx5e_cq *cq)
=======
int mlx5e_open_cq(struct mlx5e_channel *c, struct net_dim_cq_moder moder,
struct mlx5e_cq_param *param, struct mlx5e_cq *cq)
>>>>>>> e5a3e259ef
Resolution is to take the second chunk and rename net_dim_cq_moder into
dim_cq_moder. Also the signature for mlx5e_open_cq() in ...
drivers/net/ethernet/mellanox/mlx5/core/en.h +977
... and in mlx5e_open_xsk() ...
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c +64
... needs the same rename from net_dim_cq_moder into dim_cq_moder.
** Second conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c:
<<<<<<< HEAD
int cpu = cpumask_first(mlx5_comp_irq_get_affinity_mask(priv->mdev, ix));
struct dim_cq_moder icocq_moder = {0, 0};
struct net_device *netdev = priv->netdev;
struct mlx5e_channel *c;
unsigned int irq;
=======
struct net_dim_cq_moder icocq_moder = {0, 0};
>>>>>>> e5a3e259ef
Take the second chunk and rename net_dim_cq_moder into dim_cq_moder
as well.
Let me know if you run into any issues. Anyway, the main changes are:
1) Long-awaited AF_XDP support for mlx5e driver, from Maxim.
2) Addition of two new per-cgroup BPF hooks for getsockopt and
setsockopt along with a new sockopt program type which allows more
fine-grained pass/reject settings for containers. Also add a sock_ops
callback that can be selectively enabled on a per-socket basis and is
executed for every RTT to help tracking TCP statistics, both features
from Stanislav.
3) Follow-up fix from loops in precision tracking which was not propagating
precision marks and as a result verifier assumed that some branches were
not taken and therefore wrongly removed as dead code, from Alexei.
4) Fix BPF cgroup release synchronization race which could lead to a
double-free if a leaf's cgroup_bpf object is released and a new BPF
program is attached to the one of ancestor cgroups in parallel, from Roman.
5) Support for bulking XDP_TX on veth devices which improves performance
in some cases by around 9%, from Toshiaki.
6) Allow for lookups into BPF devmap and improve feedback when calling into
bpf_redirect_map() as lookup is now performed right away in the helper
itself, from Toke.
7) Add support for fq's Earliest Departure Time to the Host Bandwidth
Manager (HBM) sample BPF program, from Lawrence.
8) Various cleanups and minor fixes all over the place from many others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-07-03
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH
on BE architectures, from Jiong.
2) Fix several bugs in the x32 BPF JIT for handling shifts by 0,
from Luke and Xi.
3) Fix NULL pointer deref in btf_type_is_resolve_source_only(),
from Stanislav.
4) Properly handle the check that forwarding is enabled on the device
in bpf_ipv6_fib_lookup() helper code, from Anton.
5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit
alignment such as m68k, from Baruch.
6) Fix kernel hanging in unregister_netdevice loop while unregistering
device bound to XDP socket, from Ilya.
7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan.
8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri.
9) Fix bpftool to use correct argument in cgroup errors, from Jakub.
10) Fix detaching dummy prog in XDP redirect sample code, from Prashant.
11) Add Jonathan to AF_XDP reviewers, from Björn.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure the callback is invoked for syn-ack and data packet.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Priyaranjan Jha <priyarjha@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This refactors do_unexpected_base() to clean up some code. It also
fixes the following bugs in test_ptrace_write_gsbase():
- Incorrect printf() format string caused crashes.
- Hardcoded 0x7 for the gs selector was not reliably correct.
It also documents the fact that the test is expected to fail on old
kernels.
Fixes: a87730cc3a ("selftests/x86/fsgsbase: Test ptracer-induced GSBASE write with FSGSBASE")
Fixes: 1b6858d5a2 ("selftests/x86/fsgsbase: Test ptracer-induced GSBASE write")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "BaeChang Seok" <chang.seok.bae@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: "BaeChang Seok" <chang.seok.bae@intel.com>
Link: https://lkml.kernel.org/r/bab29c84f2475e2c30ddb00f1b877fcd7f4f96a8.1562125333.git.luto@kernel.org
Selftests are reporting this failure in test_lwt_seg6local.sh:
+ ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2
Error fetching program/map!
Failed to parse eBPF program: Operation not permitted
The problem is __attribute__((always_inline)) alone is not enough to prevent
clang from inserting those functions in .text. In that case, .text is not
marked as relocateable.
See the output of objdump -h test_lwt_seg6local.o:
Idx Name Size VMA LMA File off Algn
0 .text 00003530 0000000000000000 0000000000000000 00000040 2**3
CONTENTS, ALLOC, LOAD, READONLY, CODE
This causes the iproute bpf loader to fail in bpf_fetch_prog_sec:
bpf_has_call_data returns true but bpf_fetch_prog_relo fails as there's no
relocateable .text section in the file.
To fix this, convert to 'static __always_inline'.
v2: Use 'static __always_inline' instead of 'static inline
__attribute__((always_inline))'
Fixes: c99a84eac0 ("selftests/bpf: test for seg6local End.BPF action")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The progs for bpf selftests use several different notations to force
function inlining. Standardize to what most of them use,
static __always_inline.
Suggested-by: Song Liu <liu.song.a23@gmail.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are currently no tests for ALU64 shift operations when the shift
amount is 0. This adds 6 new tests to make sure they are equivalent
to a no-op. The x32 JIT had such bugs that could have been caught by
these tests.
Cc: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
syzbot reported following spat:
BUG: KASAN: use-after-free in __write_once_size include/linux/compiler.h:221
BUG: KASAN: use-after-free in hlist_del_rcu include/linux/rculist.h:455
BUG: KASAN: use-after-free in xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318
Write of size 8 at addr ffff888095e79c00 by task kworker/1:3/8066
Workqueue: events xfrm_hash_rebuild
Call Trace:
__write_once_size include/linux/compiler.h:221 [inline]
hlist_del_rcu include/linux/rculist.h:455 [inline]
xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318
process_one_work+0x814/0x1130 kernel/workqueue.c:2269
Allocated by task 8064:
__kmalloc+0x23c/0x310 mm/slab.c:3669
kzalloc include/linux/slab.h:742 [inline]
xfrm_hash_alloc+0x38/0xe0 net/xfrm/xfrm_hash.c:21
xfrm_policy_init net/xfrm/xfrm_policy.c:4036 [inline]
xfrm_net_init+0x269/0xd60 net/xfrm/xfrm_policy.c:4120
ops_init+0x336/0x420 net/core/net_namespace.c:130
setup_net+0x212/0x690 net/core/net_namespace.c:316
The faulting address is the address of the old chain head,
free'd by xfrm_hash_resize().
In xfrm_hash_rehash(), chain heads get re-initialized without
any hlist_del_rcu:
for (i = hmask; i >= 0; i--)
INIT_HLIST_HEAD(odst + i);
Then, hlist_del_rcu() gets called on the about to-be-reinserted policy
when iterating the per-net list of policies.
hlist_del_rcu() will then make chain->first be nonzero again:
static inline void __hlist_del(struct hlist_node *n)
{
struct hlist_node *next = n->next; // address of next element in list
struct hlist_node **pprev = n->pprev;// location of previous elem, this
// can point at chain->first
WRITE_ONCE(*pprev, next); // chain->first points to next elem
if (next)
next->pprev = pprev;
Then, when we walk chainlist to find insertion point, we may find a
non-empty list even though we're supposedly reinserting the first
policy to an empty chain.
To fix this first unlink all exact and inexact policies instead of
zeroing the list heads.
Add the commands equivalent to the syzbot reproducer to xfrm_policy.sh,
without fix KASAN catches the corruption as it happens, SLUB poisoning
detects it a bit later.
Reported-by: syzbot+0165480d4ef07360eeda@syzkaller.appspotmail.com
Fixes: 1548bc4e05 ("xfrm: policy: delete inexact policies from inexact list on hash rebuild")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The psock_tpacket test will need to access /proc/kallsyms, this would
require the kernel config CONFIG_KALLSYMS to be enabled first.
Apart from adding CONFIG_KALLSYMS to the net/config file here, check the
file existence to determine if we can run this test will be helpful to
avoid a false-positive test result when testing it directly with the
following commad against a kernel that have CONFIG_KALLSYMS disabled:
make -C tools/testing/selftests TARGETS=net run_tests
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently KVM_STATE_NESTED_EVMCS is used to signal that eVMCS
capability is enabled on vCPU.
As indicated by vmx->nested.enlightened_vmcs_enabled.
This is quite bizarre as userspace VMM should make sure to expose
same vCPU with same CPUID values in both source and destination.
In case vCPU is exposed with eVMCS support on CPUID, it is also
expected to enable KVM_CAP_HYPERV_ENLIGHTENED_VMCS capability.
Therefore, KVM_STATE_NESTED_EVMCS is redundant.
KVM_STATE_NESTED_EVMCS is currently used on restore path
(vmx_set_nested_state()) only to enable eVMCS capability in KVM
and to signal need_vmcs12_sync such that on next VMEntry to guest
nested_sync_from_vmcs12() will be called to sync vmcs12 content
into eVMCS in guest memory.
However, because restore nested-state is rare enough, we could
have just modified vmx_set_nested_state() to always signal
need_vmcs12_sync.
From all the above, it seems that we could have just removed
the usage of KVM_STATE_NESTED_EVMCS. However, in order to preserve
backwards migration compatibility, we cannot do that.
(vmx_get_nested_state() needs to signal flag when migrating from
new kernel to old kernel).
Returning KVM_STATE_NESTED_EVMCS when just vCPU have eVMCS enabled
have a bad side-effect of userspace VMM having to send nested-state
from source to destination as part of migration stream. Even if
guest have never used eVMCS as it doesn't even run a nested
hypervisor workload. This requires destination userspace VMM and
KVM to support setting nested-state. Which make it more difficult
to migrate from new host to older host.
To avoid this, change KVM_STATE_NESTED_EVMCS to signal eVMCS is
not only enabled but also active. i.e. Guest have made some
eVMCS active via an enlightened VMEntry. i.e. vmcs12 is copied
from eVMCS and therefore should be restored into eVMCS resident
in memory (by copy_vmcs12_to_enlightened()).
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure that both variants of the nasty TF-in-compat-syscall are
exercised regardless of what vendor's CPU is running the tests.
Also change the intentional signal after SYSCALL to use ud2, which
is a lot more comprehensible.
This crashes the kernel due to an FSGSBASE bug right now.
This test *also* detects a bug in KVM when run on an Intel host. KVM
people, feel free to use it to help debug. There's a bunch of code in this
test to warn instead of going into an infinite looping when the bug gets
triggered.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "BaeChang Seok" <chang.seok.bae@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: "Bae, Chang Seok" <chang.seok.bae@intel.com>
Link: https://lkml.kernel.org/r/5f5de10441ab2e3005538b4c33be9b1965d1bb63.1562035429.git.luto@kernel.org
Since this is not really a device with all capabilities, this test
ensures that it has *enough* to make it through the data path
without causing unwanted side-effects (read crash!).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
running the script on systems without netdevsim now prints:
SKIP: ipsec_offload can't load netdevsim
instead of error message & failed status.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Account XArray nodes for the page cache to the appropriate cgroup
(Johannes Weiner)
Fix idr_get_next() when called under the RCU lock (Matthew Wilcox)
Add a test for xa_insert() (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAl0WuKsACgkQDpNsjXcp
gj73zgf9Eb477PuwYZpFBA9ZxI5v/6WyqbaWXKdqEhotARgIUuv1CfVnkt1IJE6P
Z3QCRABZ3pIKHgIErJN53B7AdvdONUO4Xf9VFBqmxeWE7F9L3sROOpXc8IrR26kV
hITQn8mwgacNQ8mLtQmcSFaCVC2E7yVNBhVd5zmcA6jNIAFsOJcP06KLJTe94OXe
AB9TJvswxpzAEX8emHQ/a1SFBNZWJ7b53hBcu8CJn8CuGDxmo1/+qqoRyNY+WrDO
OohFk2u1j6Esfc6j0k+Akt8mEFyfU2oxFfv5MjL0KYEyrHoU84eZljFGgf7rQqGj
fqH9RO8J8eoj4D/3XaLL5QYRLIxRaw==
=AXZy
-----END PGP SIGNATURE-----
Merge tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax
Pull XArray fixes from Matthew Wilcox:
- Account XArray nodes for the page cache to the appropriate cgroup
(Johannes Weiner)
- Fix idr_get_next() when called under the RCU lock (Matthew Wilcox)
- Add a test for xa_insert() (Matthew Wilcox)
* tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax:
XArray tests: Add check_insert
idr: Fix idr_get_next race with idr_remove
mm: fix page cache convergence regression
Let's use union with u8[4] and u32 members for sockopt buffer,
that should fix any possible aliasing issues.
test_sockopt_sk.c: In function ‘getsetsockopt’:
test_sockopt_sk.c:115:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
if (*(__u32 *)buf != 0x55AA*2) {
^~
test_sockopt_sk.c:116:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
log_err("Unexpected getsockopt(SO_SNDBUF) 0x%x != 0x55AA*2",
^~~~~~~
Fixes: 8a027dc0d8 ("selftests/bpf: add sockopt test that exercises sk helpers")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds testing for the new pidfd_open() syscalls. Specifically, we test:
- that no invalid flags can be passed to pidfd_open()
- that no invalid pid can be passed to pidfd_open()
- that a pidfd can be retrieved with pidfd_open()
- that the retrieved pidfd references the correct pid
Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-api@vger.kernel.org
Linus Torvalds