Commit Graph

61 Commits

Author SHA1 Message Date
Josh Poimboeuf 753da4179d objtool: Remove --lto and --vmlinux in favor of --link
The '--lto' option is a confusing way of telling objtool to do stack
validation despite it being a linked object.  It's no longer needed now
that an explicit '--stackval' option exists.  The '--vmlinux' option is
also redundant.

Remove both options in favor of a straightforward '--link' option which
identifies a linked object.

Also, implicitly set '--link' with a warning if the user forgets to do
so and we can tell that it's a linked object.  This makes it easier for
manual vmlinux runs.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/dcd3ceffd15a54822c6183e5766d21ad06082b45.1650300597.git.jpoimboe@redhat.com
2022-04-22 12:32:05 +02:00
Josh Poimboeuf 22102f4559 objtool: Make noinstr hacks optional
Objtool has some hacks in place to workaround toolchain limitations
which otherwise would break no-instrumentation rules.  Make the hacks
explicit (and optional for other arches) by turning it into a cmdline
option and kernel config option.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/b326eeb9c33231b9dfbb925f194ed7ee40edcd7c.1650300597.git.jpoimboe@redhat.com
2022-04-22 12:32:04 +02:00
Josh Poimboeuf 4ab7674f59 objtool: Make jump label hack optional
Objtool secretly does a jump label hack to overcome the limitations of
the toolchain.  Make the hack explicit (and optional for other arches)
by turning it into a cmdline option and kernel config option.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/3bdcbfdd27ecb01ddec13c04bdf756a583b13d24.1650300597.git.jpoimboe@redhat.com
2022-04-22 12:32:04 +02:00
Josh Poimboeuf 26e176896a objtool: Make static call annotation optional
As part of making objtool more modular, put the existing static call
code behind a new '--static-call' option.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/d59ac57ef3d6d8380cdce20322314c9e2e556750.1650300597.git.jpoimboe@redhat.com
2022-04-22 12:32:03 +02:00
Josh Poimboeuf 7206447496 objtool: Make stack validation frame-pointer-specific
Now that CONFIG_STACK_VALIDATION is frame-pointer specific, do the same
for the '--stackval' option.  Now the '--no-fp' option is redundant and
can be removed.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/f563fa064b3b63d528de250c72012d49e14742a3.1650300597.git.jpoimboe@redhat.com
2022-04-22 12:32:03 +02:00
Josh Poimboeuf 7dce62041a objtool: Make stack validation optional
Make stack validation an explicit cmdline option so that individual
objtool features can be enabled individually by other arches.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/52da143699574d756e65ca4c9d4acaffe9b0fe5f.1650300597.git.jpoimboe@redhat.com
2022-04-22 12:32:02 +02:00
Josh Poimboeuf 99c0beb547 objtool: Add option to print section addresses
To help prevent objtool users from having to do math to convert function
addresses to section addresses, and to help out with finding data
addresses reported by IBT validation, add an option to print the section
address in addition to the function address.

Normal:

  vmlinux.o: warning: objtool: fixup_exception()+0x2d1: unreachable instruction

With '--sec-address':

  vmlinux.o: warning: objtool: fixup_exception()+0x2d1 (.text+0x76c51): unreachable instruction

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/2cea4d5299d53d1a4c09212a6ad7820aa46fda7a.1650300597.git.jpoimboe@redhat.com
2022-04-22 12:32:02 +02:00
Josh Poimboeuf b51277eb97 objtool: Ditch subcommands
Objtool has a fairly singular focus.  It runs on object files and does
validations and transformations which can be combined in various ways.
The subcommand model has never been a good fit, making it awkward to
combine and remove options.

Remove the "check" and "orc" subcommands in favor of a more traditional
cmdline option model.  This makes it much more flexible to use, and
easier to port individual features to other arches.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/5c61ebf805e90aefc5fa62bc63468ffae53b9df6.1650300597.git.jpoimboe@redhat.com
2022-04-22 12:32:01 +02:00
Josh Poimboeuf 2daf7faba7 objtool: Reorganize cmdline options
Split the existing options into two groups: actions, which actually do
something; and options, which modify the actions in some way.

Also there's no need to have short flags for all the non-action options.
Reserve short flags for the more important actions.

While at it:

- change a few of the short flags to be more intuitive

- make option descriptions more consistently descriptive

- sort options in the source like they are when printed

- move options to a global struct

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/9dcaa752f83aca24b1b21f0b0eeb28a0c181c0b0.1650300597.git.jpoimboe@redhat.com
2022-04-22 12:32:01 +02:00
Peter Zijlstra 08f87a93c8 objtool: Validate IBT assumptions
Intel IBT requires that every indirect JMP/CALL targets an ENDBR
instructions, failing this #CP happens and we die. Similarly, all
exception entries should be ENDBR.

Find all code relocations and ensure they're either an ENDBR
instruction or ANNOTATE_NOENDBR. For the exceptions look for
UNWIND_HINT_IRET_REGS at sym+0 not being ENDBR.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.705110141@infradead.org
2022-03-15 10:32:46 +01:00
Peter Zijlstra 53f7109ef9 objtool: Rename --duplicate to --lto
In order to prepare for LTO like objtool runs for modules, rename the
duplicate argument to lto.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.172584233@infradead.org
2022-03-15 10:32:42 +01:00
Peter Zijlstra f2d3a25089 objtool: Add --dry-run
Add a --dry-run argument to skip writing the modifications. This is
convenient for debugging.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.282720146@infradead.org
2022-03-15 10:32:32 +01:00
Peter Zijlstra 1cc1e4c8aa objtool: Add straight-line-speculation validation
Teach objtool to validate the straight-line-speculation constraints:

 - speculation trap after indirect calls
 - speculation trap after RET

Notable: when an instruction is annotated RETPOLINE_SAFE, indicating
  speculation isn't a problem, also don't care about sls for that
  instruction.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.023037659@infradead.org
2021-12-08 19:26:50 +01:00
Peter Zijlstra 900b4df347 objtool: Parse options from OBJTOOL_ARGS
Teach objtool to parse options from the OBJTOOL_ARGS environment
variable.

This enables things like:

  $ OBJTOOL_ARGS="--backup" make O=defconfig-build/ kernel/ponies.o

to obtain both defconfig-build/kernel/ponies.o{,.orig} and easily
inspect what objtool actually did.

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210226110004.252553847@infradead.org
2021-03-06 12:44:23 +01:00
Peter Zijlstra a2f605f9ff objtool: Collate parse_options() users
Ensure there's a single place that parses check_options, in
preparation for extending where to get options from.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210226110004.193108106@infradead.org
2021-03-06 12:44:23 +01:00
Peter Zijlstra 8ad15c6900 objtool: Add --backup
Teach objtool to write backups files, such that it becomes easier to
see what objtool did to the object file.

Backup files will be ${name}.orig.

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/YD4obT3aoXPWl7Ax@hirez.programming.kicks-ass.net
2021-03-06 12:44:23 +01:00
Linus Torvalds 414eece95b clang-lto for v5.12-rc1 (part2)
- Generate __mcount_loc in objtool (Peter Zijlstra)
 - Support running objtool against vmlinux.o (Sami Tolvanen)
 - Clang LTO enablement for x86 (Sami Tolvanen)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmA1fn8ACgkQiXL039xt
 wCbswQ//Zmnq912Ubyn5uPe9SOS/kumGDoqtxGzlZwo/pSB3qFArhD6G07sJ49XD
 nu/05ZcOda760wubnhcuK91n2fY5i/eGLXMSjfgtdVcco4Q67nPQydc+LGdhuDco
 FlhL8TAIwqYN1f2nJK1IggZpZFxz5r/r1Pq8q1S0oQRqDenxDBQwNtBba4B1OIxw
 /FE/1Hp3xwRnuJEP2jREBeY1yQ+Y1n859pZcDgSOWlTArcp8EVUi5hIWJ9DwIe73
 mqnx6PcFWEYB0zLNZmZz2gpEac+ncGyme6ChayeuQfInbL5dhx97jFGt3S6/+NSY
 mF2zyaR/+JsGGuM8dVqH3izKCJXCEAGirrdMO1ndb9HdwS3KnYEiag2ciNWL0wm3
 UEM4r0i2B14sU3pkyotKgsJdOSgorMKkQUPb2wW+OUfnkZNEWKLqylMgNXBD80l4
 WG5vYQRwwFN9jRBik6Z5YFGnwGsNIoGg1F1GRNMjh6h51adYQeBN/1QJE1FJ5L4D
 iKzmZYqimKUINXWfI6TNyqiv9TctOt65pxnRyq+MHxfTDzHGyc3MUeCeCiR1a1yI
 S5QhcgfSnC/NjDA0+oYC6yRlcBtfhjtUqFTGoZ4q4q/LF1BVU1bPyIXZrROLc05s
 LNMMBcWbJetJxFtm/gYfiVFuNitYtxbBV1krVtsWznCA2nKGJ9w=
 =htKJ
 -----END PGP SIGNATURE-----

Merge tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull more clang LTO updates from Kees Cook:
 "Clang LTO x86 enablement.

  Full disclosure: while this has _not_ been in linux-next (since it
  initially looked like the objtool dependencies weren't going to make
  v5.12), it has been under daily build and runtime testing by Sami for
  quite some time. These x86 portions have been discussed on lkml, with
  Peter, Josh, and others helping nail things down.

  The bulk of the changes are to get objtool working happily. The rest
  of the x86 enablement is very small.

  Summary:

   - Generate __mcount_loc in objtool (Peter Zijlstra)

   - Support running objtool against vmlinux.o (Sami Tolvanen)

   - Clang LTO enablement for x86 (Sami Tolvanen)"

Link: https://lore.kernel.org/lkml/20201013003203.4168817-26-samitolvanen@google.com/
Link: https://lore.kernel.org/lkml/cover.1611263461.git.jpoimboe@redhat.com/

* tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kbuild: lto: force rebuilds when switching CONFIG_LTO
  x86, build: allow LTO to be selected
  x86, cpu: disable LTO for cpu.c
  x86, vdso: disable LTO only for vDSO
  kbuild: lto: postpone objtool
  objtool: Split noinstr validation from --vmlinux
  x86, build: use objtool mcount
  tracing: add support for objtool mcount
  objtool: Don't autodetect vmlinux.o
  objtool: Fix __mcount_loc generation with Clang's assembler
  objtool: Add a pass for generating __mcount_loc
2021-02-23 15:13:45 -08:00
Sami Tolvanen 41425ebe20 objtool: Split noinstr validation from --vmlinux
This change adds a --noinstr flag to objtool to allow us to specify
that we're processing vmlinux.o without also enabling noinstr
validation. This is needed to avoid false positives with LTO when we
run objtool on vmlinux.o without CONFIG_DEBUG_ENTRY.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
2021-02-23 12:46:57 -08:00
Sami Tolvanen 0e731dbc18 objtool: Don't autodetect vmlinux.o
With LTO, we run objtool on vmlinux.o, but don't want noinstr
validation. This change requires --vmlinux to be passed to objtool
explicitly.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2021-02-23 12:46:57 -08:00
Peter Zijlstra 99d0021569 objtool: Add a pass for generating __mcount_loc
Add the --mcount option for generating __mcount_loc sections
needed for dynamic ftrace. Using this pass requires the kernel to
be compiled with -mfentry and CC_USING_NOP_MCOUNT to be defined
in Makefile.

Link: https://lore.kernel.org/lkml/20200625200235.GQ4781@hirez.programming.kicks-ass.net/
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[Sami: rebased, dropped config changes, fixed to actually use --mcount,
       and wrote a commit message.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2021-02-23 12:46:56 -08:00
Vasily Gorbik 7786032e52 objtool: Rework header include paths
Currently objtool headers are being included either by their base name
or included via ../ from a parent directory. In case of a base name usage:

 #include "warn.h"
 #include "arch_elf.h"

it does not make it apparent from which directory the file comes from.
To make it slightly better, and actually to avoid name clashes some arch
specific files have "arch_" suffix. And files from an arch folder have
to revert to including via ../ e.g:
 #include "../../elf.h"

With additional architectures support and the code base growth there is
a need for clearer headers naming scheme for multiple reasons:
1. to make it instantly obvious where these files come from (objtool
   itself / objtool arch|generic folders / some other external files),
2. to avoid name clashes of objtool arch specific headers, potential
   obtool arch generic headers and the system header files (there is
   /usr/include/elf.h already),
3. to avoid ../ includes and improve code readability.
4. to give a warm fuzzy feeling to developers who are mostly kernel
   developers and are accustomed to linux kernel headers arranging
   scheme.

Doesn't this make it instantly obvious where are these files come from?

 #include <objtool/warn.h>
 #include <arch/elf.h>

And doesn't it look nicer to avoid ugly ../ includes? Which also
guarantees this is elf.h from the objtool and not /usr/include/elf.h.

 #include <objtool/elf.h>

This patch defines and implements new objtool headers arranging
scheme. Which is:
- all generic headers go to include/objtool (similar to include/linux)
- all arch headers go to arch/$(SRCARCH)/include/arch (to get arch
  prefix). This is similar to linux arch specific "asm/*" headers but we
  are not abusing "asm" name and calling it what it is. This also helps
  to prevent name clashes (arch is not used in system headers or kernel
  exports).

To bring objtool to this state the following things are done:
1. current top level tools/objtool/ headers are moved into
   include/objtool/ subdirectory,
2. arch specific headers, currently only arch/x86/include/ are moved into
   arch/x86/include/arch/ and were stripped of "arch_" suffix,
3. new -I$(srctree)/tools/objtool/include include path to make
   includes like <objtool/warn.h> possible,
4. rewriting file includes,
5. make git not to ignore include/objtool/ subdirectory.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-13 18:13:14 -06:00
Julien Thierry d44becb9de objtool: Move ORC logic out of check()
Now that the objtool_file can be obtained outside of the check function,
orc generation builtin no longer requires check to explicitly call its
orc related functions.

Signed-off-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-09-01 17:19:11 -05:00
Julien Thierry 6545eb030e objtool: Move object file loading out of check()
Structure objtool_file can be used by different subcommands. In fact
it already is, by check and orc.

Provide a function that allows to initialize objtool_file, that builtin
can call, without relying on check to do the correct setup for them and
explicitly hand the objtool_file to them.

Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-09-01 17:19:07 -05:00
Matt Helsley 0decf1f8de objtool: Enable compilation of objtool for all architectures
Objtool currently only compiles for x86 architectures. This is
fine as it presently does not support tooling for other
architectures. However, we would like to be able to convert other
kernel tools to run as objtool sub commands because they too
process ELF object files. This will allow us to convert tools
such as recordmcount to use objtool's ELF code.

Since much of recordmcount's ELF code is copy-paste code to/from
a variety of other kernel tools (look at modpost for example) this
means that if we can convert recordmcount we can convert more.

We define weak definitions for subcommand entry functions and other weak
definitions for shared functions critical to building existing
subcommands. These return 127 when the command is missing which signify
tools that do not exist on all architectures.  In this case the "check"
and "orc" tools do not exist on all architectures so we only add them
for x86. Future changes adding support for "check", to arm64 for
example, can then modify the SUBCMD_CHECK variable when building for
arm64.

Objtool is not currently wired in to KConfig to be built for other
architectures because it's not needed for those architectures and
there are no commands it supports other than those for x86. As more
command support is enabled on various architectures the necessary
KConfig changes can be made (e.g. adding "STACK_VALIDATION") to
trigger building objtool.

[ jpoimboe: remove aliases, add __weak macro, add error messages ]

Cc: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-05-20 09:17:28 -05:00
Peter Zijlstra c4a33939a7 objtool: Implement noinstr validation
Validate that any call out of .noinstr.text is in between
instr_begin() and instr_end() annotations.

This annotation is useful to ensure correct behaviour wrt tracing
sensitive code like entry/exit and idle code. When we run code in a
sensitive context we want a guarantee no unknown code is ran.

Since this validation relies on knowing the section of call
destination symbols, we must run it on vmlinux.o instead of on
individual object files.

Add two options:

 -d/--duplicate "duplicate validation for vmlinux"
 -l/--vmlinux "vmlinux.o validation"

Where the latter auto-detects when objname ends with "vmlinux.o" and
the former will force all validations, also those already done on
!vmlinux object files.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.106268040@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-22 10:53:50 +02:00
Peter Zijlstra 1e11f3fdc3 objtool: Add a statistics mode
Have it print a few numbers which can be used to size the hashtables.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.321381240@infradead.org
2020-03-25 18:28:28 +01:00
Thomas Gleixner 1ccea77e2a treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 11:28:45 +02:00
Peter Zijlstra ea24213d80 objtool: Add UACCESS validation
It is important that UACCESS regions are as small as possible;
furthermore the UACCESS state is not scheduled, so doing anything that
might directly call into the scheduler will cause random code to be
ran with UACCESS enabled.

Teach objtool too track UACCESS state and warn about any CALL made
while UACCESS is enabled. This very much includes the __fentry__()
and __preempt_schedule() calls.

Note that exceptions _do_ save/restore the UACCESS state, and therefore
they can drive preemption. This also means that all exception handlers
must have an otherwise redundant UACCESS disable instruction;
therefore ignore this warning for !STT_FUNC code (exception handlers
are not normal functions).

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 11:02:24 +02:00
Peter Zijlstra 7697eee3dd objtool: Add --backtrace support
For when you want to know the path that reached your fail state:

  $ ./objtool check --no-fp --backtrace arch/x86/lib/usercopy_64.o
  arch/x86/lib/usercopy_64.o: warning: objtool: .altinstr_replacement+0x3: UACCESS disable without MEMOPs: __clear_user()
  arch/x86/lib/usercopy_64.o: warning: objtool:   __clear_user()+0x3a: (alt)
  arch/x86/lib/usercopy_64.o: warning: objtool:   __clear_user()+0x2e: (branch)
  arch/x86/lib/usercopy_64.o: warning: objtool:   __clear_user()+0x18: (branch)
  arch/x86/lib/usercopy_64.o: warning: objtool:   .altinstr_replacement+0xffffffffffffffff: (branch)
  arch/x86/lib/usercopy_64.o: warning: objtool:   __clear_user()+0x5: (alt)
  arch/x86/lib/usercopy_64.o: warning: objtool:   __clear_user()+0x0: <=== (func)

  0000000000000000 <__clear_user>:
    0:   e8 00 00 00 00          callq  5 <__clear_user+0x5>
                 1: R_X86_64_PLT32       __fentry__-0x4
    5:   90                      nop
    6:   90                      nop
    7:   90                      nop
    8:   48 89 f0                mov    %rsi,%rax
    b:   48 c1 ee 03             shr    $0x3,%rsi
    f:   83 e0 07                and    $0x7,%eax
   12:   48 89 f1                mov    %rsi,%rcx
   15:   48 85 c9                test   %rcx,%rcx
   18:   74 0f                   je     29 <__clear_user+0x29>
   1a:   48 c7 07 00 00 00 00    movq   $0x0,(%rdi)
   21:   48 83 c7 08             add    $0x8,%rdi
   25:   ff c9                   dec    %ecx
   27:   75 f1                   jne    1a <__clear_user+0x1a>
   29:   48 89 c1                mov    %rax,%rcx
   2c:   85 c9                   test   %ecx,%ecx
   2e:   74 0a                   je     3a <__clear_user+0x3a>
   30:   c6 07 00                movb   $0x0,(%rdi)
   33:   48 ff c7                inc    %rdi
   36:   ff c9                   dec    %ecx
   38:   75 f6                   jne    30 <__clear_user+0x30>
   3a:   90                      nop
   3b:   90                      nop
   3c:   90                      nop
   3d:   48 89 c8                mov    %rcx,%rax
   40:   c3                      retq

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03 11:02:24 +02:00
Peter Zijlstra ca41b97ed9 objtool: Add module specific retpoline rules
David allowed retpolines in .init.text, except for modules, which will
trip up objtool retpoline validation, fix that.

Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21 09:05:05 +01:00
Peter Zijlstra b5bc2231b8 objtool: Add retpoline validation
David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled
builds, where it validates no unannotated indirect  jumps or calls are
left.

Add an additional .discard.retpoline_safe section to allow annotating
the few indirect sites that are required and safe.

Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21 09:05:04 +01:00
Peter Zijlstra 43a4525f80 objtool: Use existing global variables for options
Use the existing global variables instead of passing them around and
creating duplicate global variables.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21 09:05:04 +01:00
Josh Poimboeuf 867ac9d737 objtool: Fix gcov check for older versions of GCC
Objtool tries to silence 'unreachable instruction' warnings when it
detects gcov is enabled, because gcov produces a lot of unreachable
instructions and they don't really matter.

However, the 0-day bot is still reporting some unreachable instruction
warnings with CONFIG_GCOV_KERNEL=y on GCC 4.6.4.

As it turns out, objtool's gcov detection doesn't work with older
versions of GCC because they don't create a bunch of symbols with the
'gcov.' prefix like newer versions of GCC do.

Move the gcov check out of objtool and instead just create a new
'--no-unreachable' flag which can be passed in by the kernel Makefile
when CONFIG_GCOV_KERNEL is defined.

Also rename the 'nofp' variable to 'no_fp' for consistency with the new
'no_unreachable' variable.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 9cfffb1168 ("objtool: Skip all "unreachable instruction" warnings for gcov kernels")
Link: http://lkml.kernel.org/r/c243dc78eb2ffdabb6e927844dea39b6033cd395.1500939244.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-25 11:12:45 +02:00
Josh Poimboeuf 627fce1480 objtool: Add ORC unwind table generation
Now that objtool knows the states of all registers on the stack for each
instruction, it's straightforward to generate debuginfo for an unwinder
to use.

Instead of generating DWARF, generate a new format called ORC, which is
more suitable for an in-kernel unwinder.  See
Documentation/x86/orc-unwinder.txt for a more detailed description of
this new debuginfo format and why it's preferable to DWARF.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/c9b9f01ba6c5ed2bdc9bb0957b78167fdbf9632e.1499786555.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 10:57:43 +02:00
Josh Poimboeuf dcc914f44f objtool: Move checking code to check.c
In preparation for the new 'objtool undwarf generate' command, which
will rely on 'objtool check', move the checking code from
builtin-check.c to check.c where it can be used by other commands.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/294c5c695fd73c1a5000bbe5960a7c9bec4ee6b4.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 10:19:19 +02:00
Kees Cook 92b0a1416b objtool: Add fortify_panic as __noreturn function
CONFIG_FORTIFY_SOURCE=y implements fortify_panic() as a __noreturn function,
so objtool needs to know about it too.

Suggested-by: Daniel Micay <danielmicay@gmail.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497532835-32704-1-git-send-email-jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-16 10:50:59 +02:00
Arnaldo Carvalho de Melo 0061459744 objtool: Drop ARRAY_SIZE() definition, tools/include/linux/kernel.h has it now
And with the goodies present in the kernel.h counterpart, i.e. checking
that the parameter is an array at build time.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-roiwxwgwgld4kygn65if60wa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:44 -03:00
Josh Poimboeuf 5c51f4ae84 objtool: Fix another GCC jump table detection issue
Arnd Bergmann reported a (false positive) objtool warning:

  drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0xfe: sibling call from callable instruction with changed frame pointer

The issue is in find_switch_table().  It tries to find a switch
statement's jump table by walking backwards from an indirect jump
instruction, looking for a relocation to the .rodata section.  In this
case it stopped walking prematurely: the first .rodata relocation it
encountered was for a variable (resp_state_name) instead of a jump
table, so it just assumed there wasn't a jump table.

The fix is to ignore any .rodata relocation which refers to an ELF
object symbol.  This works because the jump tables are anonymous and
have no symbols associated with them.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 3732710ff6 ("objtool: Improve rare switch jump table pattern detection")
Link: http://lkml.kernel.org/r/20170302225723.3ndbsnl4hkqbne7a@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-07 08:42:55 +01:00
Josh Poimboeuf e390f9a968 objtool, modules: Discard objtool annotation sections for modules
The '__unreachable' and '__func_stack_frame_non_standard' sections are
only used at compile time.  They're discarded for vmlinux but they
should also be discarded for modules.

Since this is a recurring pattern, prefix the section names with
".discard.".  It's a nice convention and vmlinux.lds.h already discards
such sections.

Also remove the 'a' (allocatable) flag from the __unreachable section
since it doesn't make sense for a discarded section.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/20170301180444.lhd53c5tibc4ns77@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-01 20:32:25 +01:00
Josh Poimboeuf d1091c7fa3 objtool: Improve detection of BUG() and other dead ends
The BUG() macro's use of __builtin_unreachable() via the unreachable()
macro tells gcc that the instruction is a dead end, and that it's safe
to assume the current code path will not execute past the previous
instruction.

On x86, the BUG() macro is implemented with the 'ud2' instruction.  When
objtool's branch analysis sees that instruction, it knows the current
code path has come to a dead end.

Peter Zijlstra has been working on a patch to change the WARN macros to
use 'ud2'.  That patch will break objtool's assumption that 'ud2' is
always a dead end.

Generally it's best for objtool to avoid making those kinds of
assumptions anyway.  The more ignorant it is of kernel code internals,
the better.

So create a more generic way for objtool to detect dead ends by adding
an annotation to the unreachable() macro.  The annotation stores a
pointer to the end of the unreachable code path in an '__unreachable'
section.  Objtool can read that section to find the dead ends.

Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/41a6d33971462ebd944a1c60ad4bf5be86c17b77.1487712920.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-24 09:10:52 +01:00
Josh Poimboeuf 56fb2d6eb6 objtool: Fix rare switch jump table pattern detection
The following commit:

  3732710ff6 ("objtool: Improve rare switch jump table pattern detection")

... improved objtool's ability to detect GCC switch statement jump
tables for GCC 6.  However the check to allow short jumps with the
scanned range of instructions wasn't quite right.  The pattern detection
should allow jumps to the indirect jump instruction itself.

This fixes the following warning:

  drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x315: sibling call from callable instruction with changed frame pointer

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 3732710ff6 ("objtool: Improve rare switch jump table pattern detection")
Link: http://lkml.kernel.org/r/20161026153408.2rifnw7bvoc5sex7@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-27 08:20:27 +02:00
Josh Poimboeuf 9cfffb1168 objtool: Skip all "unreachable instruction" warnings for gcov kernels
Recently objtool has started reporting a few "unreachable instruction"
warnings when CONFIG_GCOV is enabled for newer versions of GCC.  Usually
this warning means there's some new control flow that objtool doesn't
understand.  But in this case, objtool is correct and the instructions
really are inaccessible.  It's an annoying quirk of gcov, but it's
harmless, so it's ok to just silence the warnings.

With older versions of GCC, it was relatively easy to detect
gcov-specific instructions and to skip any unreachable warnings produced
by them.  But GCC 6 has gotten craftier.

Instead of continuing to play whack-a-mole with gcov, just use a bigger,
more permanent hammer and disable unreachable warnings for the whole
file when gcov is enabled.  This is fine to do because a) unreachable
warnings are usually of questionable value; and b) gcov isn't used for
production kernels and we can relax the checks a bit there.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/38d5c87d61d9cd46486dd2c86f46603dff0df86f.1476393584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-16 09:12:36 +02:00
Josh Poimboeuf 3732710ff6 objtool: Improve rare switch jump table pattern detection
GCC 6 added a new switch statement jump table optimization which makes
objtool's life harder.  It looks like:

  mov [rodata addr],%reg1
  ... some instructions ...
  jmpq *(%reg1,%reg2,8)

The optimization is quite rare, but objtool still needs to be able to
identify the pattern so that it can follow all possible control flow
paths related to the switch statement.

In order to detect the pattern, objtool starts from the indirect jump
and scans backwards through the function until it finds the first
instruction in the pattern.  If it encounters an unconditional jump
along the way, it stops and considers the pattern to be not found.

As it turns out, unconditional jumps can happen, as long as they are
small forward jumps within the range being scanned.

This fixes the following warnings:

  drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x2f4: sibling call from callable instruction with changed frame pointer
  drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0x10f: sibling call from callable instruction with changed frame pointer

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8a9ed68ae1780e8d3963e4ee13f2f257fe3a3c33.1476393584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-16 09:12:35 +02:00
Josh Poimboeuf c1fad9ef7e objtool: Add do_task_dead() to global noreturn list
objtool reports the following new warning:

  kernel/exit.o: warning: objtool: do_exit() falls through to next function complete_and_exit()

The warning is caused by do_exit()'s new call to do_task_dead(), which
is a new "noreturn" function which objtool doesn't know about yet,
introduced by:

  9af6528ee9 ("sched/core: Optimize __schedule()")

( objtool has to know all the global noreturn functions so it can follow
  the control flow of any functions which call them.  Unfortunately they
  need to be hard-coded because there's no automated way to detect them. )

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Link: http://lkml.kernel.org/r/20160922212125.zbuewckqll4yur25@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-23 07:28:05 +02:00
Josh Poimboeuf 6d01f28bc0 objtool: Support new GCC 6 switch jump table pattern
This fixes some false positive objtool warnings seen with gcc 6.1.1:

  kernel/trace/ring_buffer.o: warning: objtool: ring_buffer_read_page()+0x36c: sibling call from callable instruction with changed frame pointer
  arch/x86/kernel/reboot.o: warning: objtool: native_machine_emergency_restart()+0x139: sibling call from callable instruction with changed frame pointer
  lib/xz/xz_dec_stream.o: warning: objtool: xz_dec_run()+0xc2: sibling call from callable instruction with changed frame pointer

With GCC 6, a new code pattern is sometimes used to access a switch
statement jump table in .rodata, which objtool doesn't yet recognize:

  mov [rodata addr],%reg1
  ... some instructions ...
  jmpq *(%reg1,%reg2,8)

Add support for detecting that pattern.  The detection code is rather
crude, but it's still effective at weeding out false positives and
catching real warnings.  It can be refined later once objtool starts
reading DWARF CFI.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b8c9503b4ad8c8a827cc5400db4c1b40a3ea07bc.1469751119.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-29 16:56:21 +02:00
Linus Torvalds 7e4dc77b28 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "With over 300 commits it's been a busy cycle - with most of the work
  concentrated on the tooling side (as it should).

  The main kernel side enhancements were:

   - Add per event callchain limit: Recently we introduced a sysctl to
     tune the max-stack for all events for which callchains were
     requested:

       $ sysctl kernel.perf_event_max_stack
       kernel.perf_event_max_stack = 127

     Now this patch introduces a way to configure this per event, i.e.
     this becomes possible:

       $ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a

     allowing finer tuning of how much buffer space callchains use.

     This uses an u16 from the reserved space at the end, leaving
     another u16 for future use.

     There has been interest in even finer tuning, namely to control the
     max stack for kernel and userspace callchains separately.  Further
     discussion is needed, we may for instance use the remaining u16 for
     that and when it is present, assume that the sample_max_stack
     introduced in this patch applies for the kernel, and the u16 left
     is used for limiting the userspace callchain (Arnaldo Carvalho de
     Melo)

   - Optimize AUX event (hardware assisted side-band event) delivery
     (Kan Liang)

   - Rework Intel family name macro usage (this is partially x86 arch
     work) (Dave Hansen)

   - Refine and fix Intel LBR support (David Carrillo-Cisneros)

   - Add support for Intel 'TopDown' events (Andi Kleen)

   - Intel uncore PMU driver fixes and enhancements (Kan Liang)

   - ... other misc changes.

  Here's an incomplete list of the tooling enhancements (but there's
  much more, see the shortlog and the git log for details):

   - Support cross unwinding, i.e.  collecting '--call-graph dwarf'
     perf.data files in one machine and then doing analysis in another
     machine of a different hardware architecture.  This enables, for
     instance, to do:

       $ perf record -a --call-graph dwarf

     on a x86-32 or aarch64 system and then do 'perf report' on it on a
     x86_64 workstation (He Kuang)

   - Allow reading from a backward ring buffer (one setup via
     sys_perf_event_open() with perf_event_attr.write_backward = 1)
     (Wang Nan)

   - Finish merging initial SDT (Statically Defined Traces) support, see
     cset comments for details about how it all works (Masami Hiramatsu)

   - Support attaching eBPF programs to tracepoints (Wang Nan)

   - Add demangling of symbols in programs written in the Rust language
     (David Tolnay)

   - Add support for tracepoints in the python binding, including an
     example, that sets up and parses sched:sched_switch events,
     tools/perf/python/tracepoint.py (Jiri Olsa)

   - Introduce --stdio-color to set up the color output mode selection
     in 'annotate' and 'report', allowing emit color escape sequences
     when redirecting the output of these tools (Arnaldo Carvalho de
     Melo)

   - Add 'callindent' option to 'perf script -F', to indent the Intel PT
     call stack, making this output more ftrace-like (Adrian Hunter,
     Andi Kleen)

   - Allow dumping the object files generated by llvm when processing
     eBPF scriptlet events (Wang Nan)

   - Add stackcollapse.py script to help generating flame graphs (Paolo
     Bonzini)

   - Add --ldlat option to 'perf mem' to specify load latency for loads
     event (e.g. cpu/mem-loads/ ) (Jiri Olsa)

   - Tooling support for Intel TopDown counters, recently added to the
     kernel (Andi Kleen)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
  perf tests: Add is_printable_array test
  perf tools: Make is_printable_array global
  perf script python: Fix string vs byte array resolving
  perf probe: Warn unmatched function filter correctly
  perf cpu_map: Add more helpers
  perf stat: Balance opening and reading events
  tools: Copy linux/{hash,poison}.h and check for drift
  perf tools: Remove include/linux/list.h from perf's MANIFEST
  tools: Copy the bitops files accessed from the kernel and check for drift
  Remove: kernel unistd*h files from perf's MANIFEST, not used
  perf tools: Remove tools/perf/util/include/linux/const.h
  perf tools: Remove tools/perf/util/include/asm/byteorder.h
  perf tools: Add missing linux/compiler.h include to perf-sys.h
  perf jit: Remove some no-op error handling
  perf jit: Add missing curly braces
  objtool: Initialize variable to silence old compiler
  objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
  perf record: Add --tail-synthesize option
  perf session: Don't warn about out of order event if write_backward is used
  perf tools: Enable overwrite settings
  ...
2016-07-25 13:20:41 -07:00
Arnaldo Carvalho de Melo b49364f36c objtool: Initialize variable to silence old compiler
gcc version 4.1.2 20080704 (Red Hat 4.1.2-55) barfs with:

    CC       /tmp/build/objtool/builtin-check.o
  cc1: warnings being treated as errors
  builtin-check.c: In function 'cmd_check':
  builtin-check.c:667: warning: 'prev_rela' may be used uninitialized in this function
  mv: cannot stat `/tmp/build/objtool/.builtin-check.o.tmp': No such file or directory
  make[1]: *** [/tmp/build/objtool/builtin-check.o] Error 1

Init it to NULL to silence it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qolo31rl2ojlwj1lj9dhemyz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:32:52 -03:00
Arnaldo Carvalho de Melo d0761e37fe perf tools: Uninline scnprintf() and vscnprint()
They were in tools/include/linux/kernel.h, requiring that it in turn
included stdio.h, which is way too heavy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-855h8olnkot9v0dajuee1lo3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:24 -03:00
Josh Poimboeuf 0ea5ad869c objtool: Fix STACK_FRAME_NON_STANDARD macro checking for function symbols
Mathieu Desnoyers reported that the STACK_FRAME_NON_STANDARD macro
wasn't working with the lttng_filter_interpret_bytecode() function in
the lttng-modules code.

Usually the relocation created by STACK_FRAME_NON_STANDARD creates a
reference to a section symbol like this:

  Offset              Type            Value               Addend Name
  000000000000000000  X86_64_64       000000000000000000   +3136 .text

But in this case it created a reference to a function symbol:

  Offset              Type            Value               Addend Name
  000000000000000000  X86_64_64       0x00000000000003a0      +0 lttng_filter_interpret_bytecode

To be honest I have no idea what causes gcc to decide to do one over the
other.  But both are valid ELF, so add support for the function symbol.

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lttng-dev@lists.lttng.org
Link: http://lkml.kernel.org/r/9cee42843bc6d94e990a152e4e0319cfdf6756ef.1466023450.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-10 17:15:58 +02:00
Josh Poimboeuf b1547d3101 objtool: Detect falling through to the next function
There are several cases in compiled C code where a function may not
return at the end, and may instead fall through to the next function.

That may indicate a bug in the code, or a gcc bug, or even an objtool
bug.  But in each case, objtool reports an unhelpful warning, something
like:

  drivers/scsi/qla2xxx/qla_attr.o: warning: objtool: qla2x00_get_fc_host_stats()+0x0: duplicate frame pointer save
  drivers/scsi/qla2xxx/qla_attr.o: warning: objtool: qla2x00_get_fc_host_stats()+0x0: frame pointer state mismatch

Detect this situation and print a more useful error message:

  drivers/scsi/qla2xxx/qla_attr.o: warning: objtool: qla2x00_get_host_fabric_name() falls through to next function qla2x00_get_starget_node_name()

Also add some information about this warning and its potential causes to
the documentation.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/caa4ec6c687931db805e692d4e4bf06cd87d33e6.1460729697.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-16 11:14:17 +02:00