Split the existing options into two groups: actions, which actually do
something; and options, which modify the actions in some way.
Also there's no need to have short flags for all the non-action options.
Reserve short flags for the more important actions.
While at it:
- change a few of the short flags to be more intuitive
- make option descriptions more consistently descriptive
- sort options in the source like they are when printed
- move options to a global struct
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/9dcaa752f83aca24b1b21f0b0eeb28a0c181c0b0.1650300597.git.jpoimboe@redhat.com
Intel IBT requires the target of any indirect CALL or JMP instruction
to be the ENDBR instruction; optionally it allows those two
instructions to have a NOTRACK prefix in order to avoid this
requirement.
The kernel will not enable the use of NOTRACK, as such any occurence
of it in compiler generated code should be flagged.
Teach objtool to Decode ENDBR instructions and WARN about NOTRACK
prefixes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.645963517@infradead.org
The ENQCMD instruction implicitly accesses the PASID_MSR to fill in the
pasid field of the descriptor being submitted to an accelerator. But
there is no precise (and stable across kernel changes) point at which
the PASID_MSR is updated from the value for one task to the next.
Kernel code that uses accelerators must always use the ENQCMDS instruction
which does not access the PASID_MSR.
Check for use of the ENQCMD instruction in the kernel and warn on its
usage.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220207230254.3342514-11-fenghua.yu@intel.com
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Teach objtool to validate the straight-line-speculation constraints:
- speculation trap after indirect calls
- speculation trap after RET
Notable: when an instruction is annotated RETPOLINE_SAFE, indicating
speculation isn't a problem, also don't care about sls for that
instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.023037659@infradead.org
Instead of writing complete alternatives, simply provide a list of all
the retpoline thunk calls. Then the kernel is free to do with them as
it pleases. Simpler code all-round.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20211026120309.850007165@infradead.org
Commit e31694e0a7 ("objtool: Don't make .altinstructions writable")
aligned objtool-created and kernel-created .altinstructions section
flags, but there remains a minor discrepency in their use of a section
entry size: objtool sets one while the kernel build does not.
While sh_entsize of sizeof(struct alt_instr) seems intuitive, this small
deviation can cause failures with external tooling (kpatch-build).
Fix this by creating new .altinstructions sections with sh_entsize of 0
and then later updating sec->sh_size as alternatives are added to the
section. An added benefit is avoiding the data descriptor and buffer
created by elf_create_section(), but previously unused by
elf_add_alternative().
Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20210822225037.54620-2-joe.lawrence@redhat.com
Cc: Andy Lavr <andy.lavr@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Normally objtool will now follow indirect calls; there is no need.
However, this becomes a problem with noinstr validation; if there's an
indirect call from noinstr code, we very much need to know it is to
another noinstr function. Luckily there aren't many indirect calls in
entry code with the obvious exception of paravirt. As such, noinstr
validation didn't work with paravirt kernels.
In order to track pv_ops[] call targets, objtool reads the static
pv_ops[] tables as well as direct assignments to the pv_ops[] array,
provided the compiler makes them a single instruction like:
bf87: 48 c7 05 00 00 00 00 00 00 00 00 movq $0x0,0x0(%rip)
bf92 <xen_init_spinlocks+0x5f>
bf8a: R_X86_64_PC32 pv_ops+0x268
There are, as of yet, no warnings for when this goes wrong :/
Using the functions found with the above means, all pv_ops[] calls are
now subject to noinstr validation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210624095149.118815755@infradead.org
Turns out the compilers also generate tail calls to __sanitize_cov*(),
make sure to also patch those out in noinstr code.
Fixes: 0f1441b44e ("objtool: Fix noinstr vs KCOV")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20210624095147.818783799@infradead.org
Andi reported that objtool on vmlinux.o consumes more memory than his
system has, leading to horrific performance.
This is in part because we keep a struct instruction for every
instruction in the file in-memory. Shrink struct instruction by
removing the CFI state (which includes full register state) from it
and demand allocating it.
Given most instructions don't actually change CFI state, there's lots
of repetition there, so add a hash table to find previous CFI
instances.
Reduces memory consumption (and runtime) for processing an
x86_64-allyesconfig:
pre: 4:40.84 real, 143.99 user, 44.18 sys, 30624988 mem
post: 2:14.61 real, 108.58 user, 25.04 sys, 16396184 mem
Suggested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210624095147.756759107@infradead.org
kernel tooling such as kpatch-build.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MvPd
-----END PGP SIGNATURE-----
mergetag object d33b9035e1
type commit
tag objtool-core-2021-06-28
tagger Ingo Molnar <mingo@kernel.org> 1624859477 +0200
The biggest change in this cycle is the new code to handle
and rewrite variable sized jump labels - which results in
slightly tighter code generation in hot paths, through the
use of short(er) NOPs.
Also a number of cleanups and fixes, and a change to the
generic include/linux/compiler.h to handle a s390 GCC quirk.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+HAB
-----END PGP SIGNATURE-----
Merge tags 'objtool-urgent-2021-06-28' and 'objtool-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix and updates from Ingo Molnar:
"An ELF format fix for a section flags mismatch bug that breaks kernel
tooling such as kpatch-build.
The biggest change in this cycle is the new code to handle and rewrite
variable sized jump labels - which results in slightly tighter code
generation in hot paths, through the use of short(er) NOPs.
Also a number of cleanups and fixes, and a change to the generic
include/linux/compiler.h to handle a s390 GCC quirk"
* tag 'objtool-urgent-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Don't make .altinstructions writable
* tag 'objtool-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Improve reloc hash size guestimate
instrumentation.h: Avoid using inline asm operand modifiers
compiler.h: Avoid using inline asm operand modifiers
kbuild: Fix objtool dependency for 'OBJECT_FILES_NON_STANDARD_<obj> := n'
objtool: Reflow handle_jump_alt()
jump_label/x86: Remove unused JUMP_LABEL_NOP_SIZE
jump_label, x86: Allow short NOPs
objtool: Provide stats for jump_labels
objtool: Rewrite jump_label instructions
objtool: Decode jump_entry::key addend
jump_label, x86: Emit short JMP
jump_label: Free jump_entry::key bit1 for build use
jump_label, x86: Add variable length patching support
jump_label, x86: Introduce jump_entry_size()
jump_label, x86: Improve error when we fail expected text
jump_label, x86: Factor out the __jump_table generation
jump_label, x86: Strip ASM jump_label support
x86, objtool: Dont exclude arch/x86/realmode/
objtool: Rewrite hashtable sizing
When objtool creates the .altinstructions section, it sets the SHF_WRITE
flag to make the section writable -- unless the section had already been
previously created by the kernel. The mismatch between kernel-created
and objtool-created section flags can cause failures with external
tooling (kpatch-build). And the section doesn't need to be writable
anyway.
Make the section flags consistent with the kernel's.
Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/6c284ae89717889ea136f9f0064d914cd8329d31.1624462939.git.jpoimboe@redhat.com
It turns out that the compilers generate conditional branches to the
retpoline thunks like:
5d5: 0f 85 00 00 00 00 jne 5db <cpuidle_reflect+0x22>
5d7: R_X86_64_PLT32 __x86_indirect_thunk_r11-0x4
while the rewrite can only handle JMP/CALL to the thunks. The result
is the alternative wrecking the code. Make sure to skip writing the
alternatives for conditional branches.
Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Reported-by: Lukasz Majczak <lma@semihalf.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Currently x86 kernel cross-compiled on big endian system fails at boot with:
kernel BUG at arch/x86/kernel/alternative.c:258!
Corresponding bug condition look like the following:
BUG_ON(feature >= (NCAPINTS + NBUGINTS) * 32);
Fix that by converting alternative feature/cpuid to target endianness.
Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/patch-2.thread-6c9df9.git-6c9df9a8098d.your-ad-here.call-01620841104-ext-2554@work.hours
Teach objtool about the the low bits in the struct static_key pointer.
That is, the low two bits of @key in:
struct jump_entry {
s32 code;
s32 target;
long key;
}
as found in the __jump_table section. Since @key has a relocation to
the variable (to be resolved by the linker), the low two bits will be
reflected in the relocation's addend.
As such, find the reloc and store the addend, such that we can access
these bits.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210506194158.028024143@infradead.org
- Standardize the crypto asm code so that it looks like compiler-generated
code to objtool - so that it can understand it. This enables unwinding
from crypto asm code - and also fixes the last known remaining objtool
warnings for LTO and more.
- x86 decoder fixes: clean up and fix the decoder, and also extend it a bit
- Misc fixes and cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=poAZ
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Standardize the crypto asm code so that it looks like compiler-
generated code to objtool - so that it can understand it. This
enables unwinding from crypto asm code - and also fixes the last
known remaining objtool warnings for LTO and more.
- x86 decoder fixes: clean up and fix the decoder, and also extend it a
bit
- Misc fixes and cleanups
* tag 'objtool-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/crypto: Enable objtool in crypto code
x86/crypto/sha512-ssse3: Standardize stack alignment prologue
x86/crypto/sha512-avx2: Standardize stack alignment prologue
x86/crypto/sha512-avx: Standardize stack alignment prologue
x86/crypto/sha256-avx2: Standardize stack alignment prologue
x86/crypto/sha1_avx2: Standardize stack alignment prologue
x86/crypto/sha_ni: Standardize stack alignment prologue
x86/crypto/crc32c-pcl-intel: Standardize jump table
x86/crypto/camellia-aesni-avx2: Unconditionally allocate stack buffer
x86/crypto/aesni-intel_avx: Standardize stack alignment prologue
x86/crypto/aesni-intel_avx: Fix register usage comments
x86/crypto/aesni-intel_avx: Remove unused macros
objtool: Support asm jump tables
objtool: Parse options from OBJTOOL_ARGS
objtool: Collate parse_options() users
objtool: Add --backup
objtool,x86: More ModRM sugar
objtool,x86: Rewrite ADD/SUB/AND
objtool,x86: Support %riz encodings
objtool,x86: Simplify register decode
...
When the compiler emits: "CALL __x86_indirect_thunk_\reg" for an
indirect call, have objtool rewrite it to:
ALTERNATIVE "call __x86_indirect_thunk_\reg",
"call *%reg", ALT_NOT(X86_FEATURE_RETPOLINE)
Additionally, in order to not emit endless identical
.altinst_replacement chunks, use a global symbol for them, see
__x86_indirect_alt_*.
This also avoids objtool from having to do code generation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151300.320177914@infradead.org
The __x86_indirect_ naming is obviously not generic. Shorten to allow
matching some additional magic names later.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151259.630296706@infradead.org
Currently, optimize_nops() scans to see if the alternative starts with
NOPs. However, the emit pattern is:
141: \oldinstr
142: .skip (len-(142b-141b)), 0x90
That is, when 'oldinstr' is short, the tail is padded with NOPs. This case
never gets optimized.
Rewrite optimize_nops() to replace any trailing string of NOPs inside
the alternative to larger NOPs. Also run it irrespective of patching,
replacing NOPs in both the original and replaced code.
A direct consequence is that 'padlen' becomes superfluous, so remove it.
[ bp:
- Adjust commit message
- remove a stale comment about needing to pad
- add a comment in optimize_nops()
- exit early if the NOP verif. loop catches a mismatch - function
should not not add NOPs in that case
- fix the "optimized NOPs" offsets output ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210326151259.442992235@infradead.org
Since the kernel will rely on a single canonical set of NOPs, make sure
objtool uses the exact same ones.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210312115749.136357911@infradead.org
When there's a SIB byte, the register otherwise denoted by r/m will
then be denoted by SIB.base REX.b will now extend this. SIB.index == SP
is magic and notes an index value zero.
This means that there's a bunch of alternative (longer) encodings for
the same thing. Eg. 'ModRM.mod != 3, ModRM.r/m = AX' can be encoded as
'ModRM.mod != 3, ModRM.r/m = SP, SIB.base = AX, SIB.index = SP' which is actually 4
different encodings because the value of SIB.scale is irrelevant,
giving rise to 5 different but equal encodings.
Support these encodings and clean up the SIB handling in general.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173627.472967498@infradead.org
Since the CFI_reg number now matches the instruction encoding order do
away with the op_to_cfi_reg[] and use direct assignment.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173627.362004522@infradead.org
Since we can now have multiple stack-ops per instruction, we don't
need to special case LEAVE and can simply emit the composite
operations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173627.253273977@infradead.org
Current LEA decoding is a bunch of special cases, properly decode the
instruction, with exception of full SIB and RIP-relative modes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173627.143250641@infradead.org
Make them match the instruction encoding numbering.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20210211173627.033720313@infradead.org
Where we already decode: mov %rsp, %reg, also decode mov %rsp, (%reg).
Nothing should match for this new stack-op.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
The ORC metadata generated for UNWIND_HINT_FUNC isn't actually very
func-like. With certain usages it can cause stack state mismatches
because it doesn't set the return address (CFI_RA).
Also, users of UNWIND_HINT_RET_OFFSET no longer need to set a custom
return stack offset. Instead they just need to specify a func-like
situation, so the current ret_offset code is hacky for no good reason.
Solve both problems by simplifying the RET_OFFSET handling and
converting it into a more useful UNWIND_HINT_FUNC.
If we end up needing the old 'ret_offset' functionality again in the
future, we should be able to support it pretty easily with the addition
of a custom 'sp_offset' in UNWIND_HINT_FUNC.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/db9d1f5d79dddfbb3725ef6d8ec3477ad199948d.1611263462.git.jpoimboe@redhat.com
The JMP_NOSPEC macro branches to __x86_retpoline_*() rather than the
__x86_indirect_thunk_*() wrappers used by C code. Detect jumps to
__x86_retpoline_*() as retpoline dynamic jumps.
Presumably this doesn't trigger a user-visible bug. I only found it
when testing vmlinux.o validation.
Fixes: 39b735332c ("objtool: Detect jumps to retpoline thunks")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/31f5833e2e4f01e3d755889ac77e3661e906c09f.1611263461.git.jpoimboe@redhat.com
Currently objtool headers are being included either by their base name
or included via ../ from a parent directory. In case of a base name usage:
#include "warn.h"
#include "arch_elf.h"
it does not make it apparent from which directory the file comes from.
To make it slightly better, and actually to avoid name clashes some arch
specific files have "arch_" suffix. And files from an arch folder have
to revert to including via ../ e.g:
#include "../../elf.h"
With additional architectures support and the code base growth there is
a need for clearer headers naming scheme for multiple reasons:
1. to make it instantly obvious where these files come from (objtool
itself / objtool arch|generic folders / some other external files),
2. to avoid name clashes of objtool arch specific headers, potential
obtool arch generic headers and the system header files (there is
/usr/include/elf.h already),
3. to avoid ../ includes and improve code readability.
4. to give a warm fuzzy feeling to developers who are mostly kernel
developers and are accustomed to linux kernel headers arranging
scheme.
Doesn't this make it instantly obvious where are these files come from?
#include <objtool/warn.h>
#include <arch/elf.h>
And doesn't it look nicer to avoid ugly ../ includes? Which also
guarantees this is elf.h from the objtool and not /usr/include/elf.h.
#include <objtool/elf.h>
This patch defines and implements new objtool headers arranging
scheme. Which is:
- all generic headers go to include/objtool (similar to include/linux)
- all arch headers go to arch/$(SRCARCH)/include/arch (to get arch
prefix). This is similar to linux arch specific "asm/*" headers but we
are not abusing "asm" name and calling it what it is. This also helps
to prevent name clashes (arch is not used in system headers or kernel
exports).
To bring objtool to this state the following things are done:
1. current top level tools/objtool/ headers are moved into
include/objtool/ subdirectory,
2. arch specific headers, currently only arch/x86/include/ are moved into
arch/x86/include/arch/ and were stripped of "arch_" suffix,
3. new -I$(srctree)/tools/objtool/include include path to make
includes like <objtool/warn.h> possible,
4. rewriting file includes,
5. make git not to ignore include/objtool/ subdirectory.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Correct objtool orc generation endianness problems to enable fully
functional x86 cross-compiles on big endian hardware.
Introduce bswap_if_needed() macro, which does a byte swap if target
endianness doesn't match the host, i.e. cross-compilation for little
endian on big endian and vice versa. The macro is used for conversion
of multi-byte values which are read from / about to be written to a
target native endianness ELF file.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The set of registers that can be included in an unwind hint and their
encoding will depend on the architecture. Have arch specific code to
decode that register.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The way to identify jump tables and retrieve all the data necessary to
handle the different execution branches is not the same on all
architectures. In order to be able to add other architecture support,
define an arch-dependent function to process jump-tables.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Raphael Gault <raphael.gault@arm.com>
[J.T.: Move arm64 bits out of this patch,
Have only one function to find the start of the jump table,
for now assume that the jump table format will be the same as
x86]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
As pointed out by the comment in handle_group_alt(), support of
relocation for instructions in an alternative group depends on whether
arch specific kernel code handles it.
So, let objtool arch specific code decide whether a relocation for
the alternative section should be accepted.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Some alternatives associated with a specific feature need to be treated
in a special way. Since the features and how to treat them vary from one
architecture to another, move the special case handling to arch specific
code.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Some macros are defined to describe the size and layout of structures
exception_table_entry, jump_entry and alt_instr. These values can vary
from one architecture to another.
Have the values be defined by arch specific code.
Suggested-by: Raphael Gault <raphael.gault@arm.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Since many compilers cannot disable KCOV with a function attribute,
help it to NOP out any __sanitizer_cov_*() calls injected in noinstr
code.
This turns:
12: e8 00 00 00 00 callq 17 <lockdep_hardirqs_on+0x17>
13: R_X86_64_PLT32 __sanitizer_cov_trace_pc-0x4
into:
12: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
13: R_X86_64_NONE __sanitizer_cov_trace_pc-0x4
Just like recordmcount does.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Before supporting additional relocation types rename the relevant
types and functions from "rela" to "reloc". This work be done with
the following regex:
sed -e 's/struct rela/struct reloc/g' \
-e 's/\([_\*]\)rela\(s\{0,1\}\)/\1reloc\2/g' \
-e 's/tmprela\(s\{0,1\}\)/tmpreloc\1/g' \
-e 's/relasec/relocsec/g' \
-e 's/rela_list/reloc_list/g' \
-e 's/rela_hash/reloc_hash/g' \
-e 's/add_rela/add_reloc/g' \
-e 's/rela->/reloc->/g' \
-e '/rela[,\.]/{ s/\([^\.>]\)rela\([\.,]\)/\1reloc\2/g ; }' \
-e 's/rela =/reloc =/g' \
-e 's/relas =/relocs =/g' \
-e 's/relas\[/relocs[/g' \
-e 's/relaname =/relocname =/g' \
-e 's/= rela\;/= reloc\;/g' \
-e 's/= relas\;/= relocs\;/g' \
-e 's/= relaname\;/= relocname\;/g' \
-e 's/, rela)/, reloc)/g' \
-e 's/\([ @]\)rela\([ "]\)/\1reloc\2/g' \
-e 's/ rela$/ reloc/g' \
-e 's/, relaname/, relocname/g' \
-e 's/sec->rela/sec->reloc/g' \
-e 's/(\(!\{0,1\}\)rela/(\1reloc/g' \
-i \
arch.h \
arch/x86/decode.c \
check.c \
check.h \
elf.c \
elf.h \
orc_gen.c \
special.c
Notable exceptions which complicate the regex include gelf_*
library calls and standard/expected section names which still use
"rela" because they encode the type of relocation expected. Also, keep
"rela" in the struct because it encodes a specific type of relocation
we currently expect.
It will eventually turn into a member of an anonymous union when a
susequent patch adds implicit addend, or "rel", relocation support.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Change objtool to support intra-function calls. On x86, an intra-function
call is represented in objtool as a push onto the stack (of the return
address), and a jump to the destination address. That way the stack
information is correctly updated and the call flow is still accurate.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200414103618.12657-4-alexandre.chartre@oracle.com
Quoting Julien:
"And the other suggestion is my other email was that you don't even
need to add INSN_EXCEPTION_RETURN. You can keep IRET as
INSN_CONTEXT_SWITCH by default and x86 decoder lookups the symbol
conaining an iret. If it's a function symbol, it can just set the type
to INSN_OTHER so that it caries on to the next instruction after
having handled the stack_op."
Suggested-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.913283807@infradead.org
With the unconditional use of handle_insn_ops(), INSN_STACK has lost
its purpose. Remove it.
Suggested-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.854203028@infradead.org
Wrap each stack_op in a macro that allocates and adds it to the list.
This simplifies trying to figure out what to do with the pre-allocated
stack_op at the end.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.736151601@infradead.org
Mostly straightforward constification, except that WARN_FUNC()
needs a writable pointer while we have read-only pointers,
so deflect this to WARN().
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200422103205.61900-4-mingo@kernel.org
There's going to be a new struct cfi_state, rename this one to make
place.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.986441913@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Teach objtool a little more about IRET so that we can avoid using the
SAVE/RESTORE annotation. In particular, make the weird corner case in
insn->restore go away.
The purpose of that corner case is to deal with the fact that
UNWIND_HINT_RESTORE lands on the instruction after IRET, but that
instruction can end up being outside the basic block, consider:
if (cond)
sync_core()
foo();
Then the hint will land on foo(), and we'll encounter the restore
hint without ever having seen the save hint.
By teaching objtool about the arch specific exception frame size, and
assuming that any IRET in an STT_FUNC symbol is an exception frame
sized POP, we can remove the use of save/restore hints for this code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.631224674@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instruction sets can include more or less complex operations which might
not fit the currently defined set of stack_ops.
Combining more than one stack_op provides more flexibility to describe
the behaviour of an instruction. This also reduces the need to define
new stack_ops specific to a single instruction set.
Allow instruction decoders to generate multiple stack_op per
instruction.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200327152847.15294-11-jthierry@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>