Commit Graph

84 Commits

Author SHA1 Message Date
Maxime Ripard b7f0dee221 clk: ux500: sysctrl: Add a determine_rate hook
The UX500 sysctrl "set_parent" clocks implement a mux with a set_parent
hook, but doesn't provide a determine_rate implementation.

This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidates to
trigger that parent change are either the assigned-clock-parents device
tree property or a call to clk_set_rate(), with determine_rate()
figuring out which parent is the best suited for a given rate.

The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.

Similarly, it doesn't look like the device tree using that clock driver
uses any of the assigned-clock properties on that clock.

So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().

The latter case would be equivalent to setting the determine_rate
implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no
determine_rate implementation is provided, clk_round_rate() (through
clk_core_round_rate_nolock()) will call itself on the parent if
CLK_SET_RATE_PARENT is set, and will not change the clock rate
otherwise.

And if it was an oversight, then we are at least explicit about our
behavior now and it can be further refined down the line.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-38-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-08 18:39:30 -07:00
Maxime Ripard 97eb8f8a95 clk: ux500: prcmu: Add a determine_rate hook
The UX500 PRCMU "clkout" clock implements a mux with a set_parent hook,
but doesn't provide a determine_rate implementation.

This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidates to
trigger that parent change are either the assigned-clock-parents device
tree property or a call to clk_set_rate(), with determine_rate()
figuring out which parent is the best suited for a given rate.

The PRCMU binding also allows to specify the default clock parent
through a device tree cell. This will be enforced at prepare time by the
driver.

The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.

The result is that the driver relies on prepare to set the default
parent, and thus the set_parent hook is effectively unused by design.

We can make that decision explicit by setting the determine_rate
implementation to clk_hw_determine_rate_no_reparent() that will keep the
same behaviour. Indeed, if no determine_rate implementation is provided,
clk_round_rate() (through clk_core_round_rate_nolock()) will call itself
on the parent if CLK_SET_RATE_PARENT is set, and will not change the
clock rate otherwise.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-37-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-08 18:39:30 -07:00
Hangyu Hua bea0b66efa clk: ux500: fix a possible off-by-one in u8500_prcc_reset_base()
Off-by-one will happen when index == ARRAY_SIZE(ur->base).

Fixes: b14cbdfd46 ("clk: ux500: Add driver for the reset portions of PRCC")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220518062537.17933-1-hbh25y@gmail.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18 13:34:03 -07:00
Linus Walleij 639d5661cc clk: ux500: Implement the missing CLKOUT clocks
This implements the two missing CLKOUT clocks for the ux500
(well really U8500/DB8500) SoC.

The clocks are initialized using a specific parent and
divider and these are specified in the device tree, see
the separate binding patch.

The implementation is a bit different in that it will only
create the clock in the clock framework if a user appears
in the device tree, rather than it being registered upfront
like most of the other clocks. This is because the clock
needs parameters for source and divider from the consumer
phandle for the clock to be set up properly when the clock
is registered.

There could be more than one user of a CLKOUT clock, but
we have not seen this in practice. If this happens the
framework prints and info and returns the previously
registered clock.

Using the clocks requires also muxing the CLKOUT1 or
CLKOUT2 to the appropriate pad. In practice this is
achived in a pinctrl handle in the DTS node for the device
using the CLKOUT clock, so this muxing is done separately
from the clock itself. Example:

  haptic@49 {
    compatible = "immersion,isa1200";
    reg = <0x49>;
    (...)
    /* clkout1 from ACLK divided by 8 */
    clocks = <&clkout_clk DB8500_CLKOUT_1 DB8500_CLKOUT_SRC_ACLK 8>;
    pinctrl-names = "default";
    pinctrl-0 = <&isa1200_janice_default>;
  };

  isa1200_janice_default: isa1200_janice {
    /* Bring out clkout1 on pin GPIO227 pin AH7 */
    janice_mux {
      function = "clkout";
      groups = "clkout1_a_1";
    };
    janice_cfg1 {
      pins = "GPIO227_AH7";
      ste,config = <&out_lo>;
    };
  (...)

This was tested successfully with the Immersion ISA1200
haptic feedback unit on the Samsung Galaxy S Advance GT-I9070
(Janice) mobile phone.

As the CLKOUT clocks need some undefined fixed rate parent
clocks that are currently missing from the PRCMU clock
implementation, the three simplest are added in this patch:
clk38m_to_clkgen, aclk and sysclk. The only parent not yet
available in the implementation is clk009, which is a kind
of special muxed and divided clock which isn't even
implemented in the vendor clock driver.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220414221751.323525-6-linus.walleij@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-25 16:17:25 -07:00
Linus Walleij a8173c5953 clk: ux500: Rewrite PRCMU clocks to use clk_hw_*
This rewrites all the u8500 PRCMU clocks and helper functions to
handle clocks using struct clk_hw rather than struct clk, as is
normal for modern clock drivers.

Use clk_hw_register(), of_clk_add_hw_provider() and stack all the
clocks into a compile-time dynamic array of
struct clk_hw_onecell_data.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220414221751.323525-5-linus.walleij@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-25 16:17:25 -07:00
Linus Walleij 00d08cd0ba clk: ux500: Drop .is_prepared state from PRCMU clocks
The core already keeps a software prepare count. Drop this
custom software prepare count.

The only semantic difference is that if disabling the clock
fails, .is_prepared() will still return 1, but this will only
serve to confuse the framework, the error message is
sufficient.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220414221751.323525-4-linus.walleij@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-25 16:17:24 -07:00
Linus Walleij 801179b670 clk: ux500: Drop .is_enabled state from PRCMU clocks
The core already keeps a software enable count. Drop this
custom software enable count.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220414221751.323525-3-linus.walleij@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-25 16:17:24 -07:00
Linus Walleij b14cbdfd46 clk: ux500: Add driver for the reset portions of PRCC
The Ux500 PRCC (peripheral reset and clock controller) can also
control reset of the IP blocks, not just clocks. As the PRCC is probed
as a clock controller and we have other platforms implementing combined
clock and reset controllers, follow this pattern and implement the PRCC
rest controller as part of the clock driver.

The reset controller needs to be selected from the machine as Ux500 has
traditionally selected its mandatory subsystem prerequisites from there.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210921184803.1757916-2-linus.walleij@linaro.org
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
[sboyd@kernel.org: Dropped allocation error message]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-26 18:06:05 -07:00
Linus Walleij 9050ad816f mfd: db8500-prcmu: Handle missing FW variant
There was an "unknown" firmware variant turning up in the wild
causing problems in the clock driver. Add this missing variant
and clarify that varian 11 and 15 are Samsung variants, as this
is now very well known from released products.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-08-09 09:33:29 +01:00
Linus Walleij 248fdcc77a clk: ux500: Fix up the SGA clock for some variants
Some of the special PRCMU firmware variants were not
properly detected in the Ux500 clock driver, resulting
in the wrong clock for the SGA.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lkml.kernel.org/r/20191217210504.27888-1-linus.walleij@linaro.org
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-04 23:27:15 -08:00
Thomas Gleixner af873fcece treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194
Based on 1 normalized pattern(s):

  license terms gnu general public license gpl version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 161 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:29:22 -07:00
Nicholas Mc Guire c942081c87 clk: ux500: add range to usleep_range
Providing a range for usleep_range() allows the hrtimer subsystem to
coalesce timers - the delay is runtime configurable so a factor 2
is taken to provide the range. With the expected range for
enable_delay_us being milliseconds, the range should lie in the 250us
range which is sufficient for hrtimer optimization.

Signed-off-by: Nicholas Mc Guire <hofrat@opentech.at>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11 11:47:50 -07:00
Rob Herring 87ab115185 clk: Use of_node_name_eq for node name comparisons
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.

For instances using of_node_cmp, this has the side effect of now using
case sensitive comparisons. This should not matter for any FDT based
system which all of these are.

Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> (clk-mstp)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (ux500)
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14 13:52:41 -08:00
Linus Walleij 726fef09b8 clk: ux500: Drop AB8540/9540 support
The AB8540 was an evolved version of the AB8500, but it was never
mass produced or put into products, only reference designs exist.
The upstream support was never completed and it is unlikely that
this will happen so drop the support for now to simplify
maintenance of the AB8500.

Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23 09:36:11 -07:00
Linus Torvalds fc35c1966e We have two changes to the core framework this time around. The first being a
large change that introduces runtime PM support to the clk framework. Now we
 properly call runtime PM operations on the device providing a clk when the clk
 is in use. This helps on SoCs where the clks provided by a device need
 something to be powered on before using the clks, like power domains or
 regulators. It also helps power those things down when clks aren't in use. The
 other core change is a devm API addition for clk providers so we can get rid of
 a bunch of clk driver remove functions that are just doing
 of_clk_del_provider().
 
 Outside of the core, we have the usual addition of clk drivers and smattering
 of non-critical fixes to existing drivers. The biggest diff is support for
 Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch
 of data.
 
 By the way, we're trying something new here where we build the tree up with
 topic branches. We plan to work this into our workflow so that we don't step
 on each other's toes, and so the fixes branch can be merged on an as-needed
 basis.
 
 Core:
  - Runtime PM support for clk providers
  - devm API for of_clk_add_hw_provider()
 
 New Drivers:
  - Mediatek MT2712 and MT7622
  - Renesas R-Car V3M SoC
 
 Updates:
  - Runtime PM support for Samsung exynos5433/exynos4412 providers
  - Removal of clkdev aliases on Samsung SoCs
  - Convert clk-gpio to use gpio descriptors
  - Various driver cleanups to match kernel coding style
  - Amlogic Video Processing Unit VPU and VAPB clks
  - Sigma-delta modulation for Allwinner audio PLLs
  - Allwinner A83t Display clks
  - Support for the second display unit clock on Renesas RZ/G1E
  - Suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
  - New clock ids for Rockchip rk3188 and rk3368 SoCs
  - Various 'const' markings on clk_ops structures
  - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJaD3qRAAoJEK0CiJfG5JUlOLgQAKWekgG/IYgcPzPWDYfg8Hwr
 sVVUK7+q7TVfbHsbYVikJuUaxutKZ0onnrYmOalTTyyxqL2E1/rYScnxdYHfcwX8
 cyfHebRHsbh/Xg45ktwjzBkO49nwuppkpXd/V80GSBUZ+lsIVl5DUrrFAZdRUEdr
 CEsAsF9tEWIl+0gqXYNuiKBV7QAYv5BUPrbJQf0PwL6jX0OAhLv+ukfN8BdmYsOb
 rdoqhdgmyHkTuIMqsC/H2yP59aAKBse7wxIYebDiTdbPWfTkC9q927fTs4A02F6L
 sHfLvCpfuB4rOjXy6LSd1gMGWIcjotZai+idHBqtNLLVz6exF1QpUCp+pZjEULbA
 /Sx9lk8A3cYoa8pTu1NrrZbZX17iHkFswqMF3T20nhUN9+Ti597ZEbRcWDcoEZtw
 v2NznOTJ7Mm2SrNHOvDklstggNIGcwiAEePGMo7rJNEQZChpDjQj/gJWKzn0UwL4
 zfk+0EzoejPdvZ5FJUfmlr8Tqk53uw+y7/0xQ6gf8lDviTrzzoeXtJUyumGBiuGx
 RxFywf8n02oLYRJm5hu+0NkC+/bX0Lxg/kwiR6FLBFbBFgkWyp7FGcxhlm6ZiBfe
 0KkPciWslNavn5KhljIkZDbXymbvhhSr9uBEFsyeJueA5q7sSghWloL8Ag1cac3W
 e6swD1ngXtM/t5gjOLhR
 =hC7z
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "We have two changes to the core framework this time around.

  The first being a large change that introduces runtime PM support to
  the clk framework. Now we properly call runtime PM operations on the
  device providing a clk when the clk is in use. This helps on SoCs
  where the clks provided by a device need something to be powered on
  before using the clks, like power domains or regulators. It also helps
  power those things down when clks aren't in use.

  The other core change is a devm API addition for clk providers so we
  can get rid of a bunch of clk driver remove functions that are just
  doing of_clk_del_provider().

  Outside of the core, we have the usual addition of clk drivers and
  smattering of non-critical fixes to existing drivers. The biggest diff
  is support for Mediatek MT2712 and MT7622 SoCs, but those patches
  really just add a bunch of data.

  By the way, we're trying something new here where we build the tree up
  with topic branches. We plan to work this into our workflow so that we
  don't step on each other's toes, and so the fixes branch can be merged
  on an as-needed basis.

  Summary:

  Core:
   - runtime PM support for clk providers
   - devm API for of_clk_add_hw_provider()

  New Drivers:
   - Mediatek MT2712 and MT7622
   - Renesas R-Car V3M SoC

  Updates:
   - runtime PM support for Samsung exynos5433/exynos4412 providers
   - removal of clkdev aliases on Samsung SoCs
   - convert clk-gpio to use gpio descriptors
   - various driver cleanups to match kernel coding style
   - Amlogic Video Processing Unit VPU and VAPB clks
   - sigma-delta modulation for Allwinner audio PLLs
   - Allwinner A83t Display clks
   - support for the second display unit clock on Renesas RZ/G1E
   - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
   - new clock ids for Rockchip rk3188 and rk3368 SoCs
   - various 'const' markings on clk_ops structures
   - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
  clk: stm32h7: fix test of clock config
  clk: pxa: fix building on older compilers
  clk: sunxi-ng: a83t: Fix i2c buses bits
  clk: ti: dra7-atl-clock: fix child-node lookups
  clk: qcom: common: fix legacy board-clock registration
  clk: uniphier: fix DAPLL2 clock rate of Pro5
  clk: uniphier: fix parent of miodmac clock data
  clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu'
  clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep()
  clk: hi3660: fix incorrect uart3 clock freqency
  clk: kona-setup: Delete error messages for failed memory allocations
  ARC: clk: fix spelling mistake: "configurarion" -> "configuration"
  clk: cdce925: remove redundant check for non-null parent_name
  clk: versatile: Improve sizeof() usage
  clk: versatile: Delete error messages for failed memory allocations
  clk: ux500: Improve sizeof() usage
  clk: ux500: Delete error messages for failed memory allocations
  clk: spear: Delete error messages for failed memory allocations
  clk: ti: Delete error messages for failed memory allocations
  clk: mmp: Adjust checks for NULL pointers
  ...
2017-11-17 20:04:24 -08:00
Markus Elfring 0b10adbae3 clk: ux500: Improve sizeof() usage
Replace the specification of data structures by pointer
dereferences as the parameter for the operator "sizeof" to make
the corresponding size determination a bit safer according to the
Linux coding style convention.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-13 17:42:25 -08:00
Markus Elfring 7a294dc6c8 clk: ux500: Delete error messages for failed memory allocations
Omit extra messages for a memory allocation failure in these
functions.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-13 17:42:06 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Arvind Yadav 56d8777641 clk: ux500: prcc: constify clk_ops.
clk_ops are not supposed to change at runtime. All functions
working with clk_ops provided by <linux/clk-provider.h> work
with const clk_ops. So mark the non-const clk_ops as const.

Here, Function "clk_reg_prcc" is used to initialized clk_init_data.
clk_init_data is working with const clk_ops. So make clk_reg_prcc
non-const clk_ops argument as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-30 22:27:49 -07:00
Arvind Yadav ca2ea4b036 clk: ux500: sysctrl: constify clk_ops.
clk_ops are not supposed to change at runtime. All functions
working with clk_ops provided by <linux/clk-provider.h> work
with const clk_ops. So mark the non-const clk_ops as const.

Here, Function "clk_reg_sysctrl" is used to initialized clk_init_data.
clk_init_data is working with const clk_ops. So make clk_reg_sysctrl
non-const clk_ops argument as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-30 22:27:23 -07:00
Arvind Yadav df4f45a00b clk: ux500: prcmu: constify clk_ops.
clk_ops are not supposed to change at runtime. All functions
working with clk_ops provided by <linux/clk-provider.h> work
with const clk_ops. So mark the non-const clk_ops as const.

Here, Function "clk_reg_prcmu" is used to initialized clk_init_data.
clk_init_data is working with const clk_ops. So make clk_reg_prcmu
non-const clk_ops argument as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-30 22:27:00 -07:00
Linus Walleij 55921ce276 clk: ux500: Convert ABx500 clocks to use OF probing
These clocks have been broken for a long time unfortunately, a
hurdle of misc problems made them stop working at some point
breaking USB and audio on Ux500.

The platform as such and all "regular" clocks are migrated to
OF/device tree, so let's migrate also this driver.

With this patch and the corresponding DTS fixes, and a bunch
of probe deferral fixes, audio starts working again on Ux500.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26 16:10:02 -08:00
Linus Walleij 689a318c16 clk: ux500: move AB8500 sysclk over to PRCMU clk driver
The AB8500 sysclk is just another PRCMU-controlled clock, there
is no reason why it should be in the ABx500-controlled part of
the clock implementation. Doing this and the corresponding device
tree changes makes USB work on the Ux500 again.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26 16:10:01 -08:00
Arnd Bergmann 269f1aac14 ARM: ux500: use CLK_OF_DECLARE()
The ux500 DT support predates the CLK_OF_DECLARE macro and calls
directly into the clk driver from platform code.

Converting this to CLK_OF_DECLARE makes the code much nicer and
similar to how modern platforms do it today. It also removes the
last user of cpu_is_u8500_family() etc.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-12 11:24:07 +02:00
Stephen Boyd 66f4ae777d clk: ux500: Remove CLK_IS_ROOT
This flag is a no-op now. Remove usage of the flag.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02 17:48:03 -08:00
Linus Walleij 5dc0fe199b clk/ARM: move Ux500 PRCC bases to the device tree
The base addresses for the Ux500 PRCC controllers are hardcoded,
let's move them to the clock node in the device tree and delete
the constants.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24 16:49:14 -07:00
Stephen Boyd 836ee0f7d9 clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)
Use the provider based method to get a clock's name so that we
can get rid of the clk member in struct clk_hw one day. Mostly
converted with the following coccinelle script.

@@
struct clk_hw *E;
@@

-__clk_get_name(E->clk)
+clk_hw_get_name(E)

Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kevin Cernekee <cernekee@chromium.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24 16:49:12 -07:00
Linus Walleij 0f350f063e clk: ux500: delete the non-DT U8500 clock implementation
This code is unused and not coming back. Let's kill it off.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24 16:49:02 -07:00
Stephen Boyd a162ca912c clk: ux500: Remove clk.h and clkdev.h includes
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also remove clkdev.h in files that aren't using
it.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:18 -07:00
Linus Walleij a6ae41b54c clk: ux500: ape[ate|trace]clk are scaleable
The APEATCLK and APETRACECLK are actually scaleable so register
them as scaleable clocks.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-07 11:32:39 -07:00
Stephen Boyd 3a5c111f5d clk: ux500: Drop use of clk-private.h
These drivers don't need to include clk-private.h. Remove the
include.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-27 11:56:33 -08:00
Wolfram Sang 661ff5be95 clk: ux500: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:20:23 +02:00
Sachin Kamat c112c1d8ef clk: ux500: Staticize ux500_twocell_get
ux500_twocell_get is a local symbol.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-02-23 15:04:40 -08:00
Sachin Kamat 24c039f6ac clk: ux500: Remove extra semicolon
Extra semicolon is redundant. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-19 17:47:33 -08:00
Linus Walleij f5ff9a115e clk: ux500: fix erroneous bit assignment
Due to a typo or similar, the peripheral group 2 clock 11
gate was set to bit 1 instead of bit 11. We need to fix this
to be able to set the correct enable bit in the device tree:
when trying to correct the bit assignment in the device tree,
the system would hang.

Cc: Mike Turquette <mturquette@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-18 13:25:28 +02:00
Lee Jones 257015a20c clk: ux500: Provide a look-up for the ARMSS clock
The ARMSS clock is used by the newly DT enabled CPUFreq driver.

Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:09:29 +02:00
Lee Jones 4e33466095 clk: ux500: Add Device Tree support for the TWD clock
This patch enables the TWD fixed factor clock to be specified from
Device Tree via phandles to the "smp-twd-clock" node.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:05:57 +02:00
Lee Jones d625a73067 clk: ux500: Add Device Tree support for the RTC clock
This patch enables the RTC fixed frequency clock to be specified from
Device Tree via phandles to the "rtc32k-clock" node.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:05:53 +02:00
Lee Jones 89da2dfafc clk: ux500: Add Device Tree support for the PRCC Kernel clock
This patch enables clocks to be specified from Device Tree via phandles
to the "prcc-kernel-clock" node.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:05:49 +02:00
Lee Jones 2d0803001f clk: ux500: Add Device Tree support for the PRCC Peripheral clock
This patch enables clocks to be specified from Device Tree via phandles
to the "prcc-periph-clock" node.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:05:45 +02:00
Lee Jones f9fcb8e8c8 clk: ux500: Add Device Tree support for the PRCMU clock
This patch enables clocks to be specified from Device Tree via phandles
to the "prcmu-clock" node.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:05:40 +02:00
Lee Jones b4bdc81b5b clk: ux500: Add a 2-cell Device Tree parser for obtaining PRCC clocks
PRCC (peripheral and kernel) clocks are specified using a property tuple
<&phandle base bit>, where 'base' is the peripheral (1, 2, 3, 5 or 6),
and bit is read-in value into that peripheral stipulated by the hardware
specification.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:05:35 +02:00
Lee Jones dec759d8ef clk: ux500: Provide u8500_clk with skeleton Device Tree support
The functional components will be added on a per-clock basis.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:05:31 +02:00
Lee Jones 82b0f4b7c5 clk: ux500: Copy u8500_clk_init() ready for DT enablement
Here we're using the old clock initialisation function as a template.
It's necessary to remove all of the clk_register_clkdev() calls as
they don't make sense when booting with Device Tree.

Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:05:26 +02:00
Lee Jones 0473b177c3 clk: ux500: Remove BML8580 clock
There is no mention of the PRCMU_BML8580CLK in any of the Design
Specifications for the chips supported in Mainline. In fact, where it
is incorrectly used in the u8540 clock definition driver it would
have the side effect of using the incorrect clock management address
([PRCM_BML8580CLK_MGT] 0x108 instead of the correct value 0x04C).

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:05:22 +02:00
Linus Torvalds 92295f632c The common clock framework changes for 3.11 include new clock drivers
across several different platforms and architectures, fixes to existing
 drivers, a MAINTAINERS file fix and improvements to the basic clock
 types that allow them to be of use to more platforms than before. Only a
 few fixes to the core framework are included with most all of the
 changes landing in the various clock drivers themselves.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0hFpAAoJEDqPOy9afJhJcr4P/iA83uEGXIncUzFsbCIsKNGl
 g8yoasz1mpcAng31kK54lasNpFvUYIEBLKWkJBN56h2J5gJ3OKpi7basnQGRykjh
 +rCg2dV4gKDBQzypdeg5kPxf0YLJ8KrwyngcRm5KA3oxKYtmLHt/M2jmDd3DXP0h
 dKo2bkR52eQ7E+ij6/MWgUObxWiFnH0C5Lf+L0tGHsRlRvZTV6NMymX2v0sIOCw9
 hpsrL+7Hqf/+PBfWBljH0IAiI72I5dGEaJoesdTRWz8qut+duwF+OGlzMZnkclMf
 XU444HnvCq3bWGP5NYf9ASO4RRA2IGEoN/eDeiVX5hvkAjeUNHVNhkcUk28Xn9vI
 ZxCxwBXki4wGayiQm4TTgORozmp4i+NwbOuG+s3For1qQU43aA7ppwysFHGXngQa
 bxXT2pNECLX8WR91vkmEdqeQVm6s++R3zltHFUry1VRjTIs5y18Dt9kR6T16NKKQ
 ztoegeQQ8SI7HOLd+tR2v19VXH4zoV3NYAdkCKJX+VXFg+4mgJERmXoU350V3d8D
 wxde7WU4KLO4+1Fngror8wocP8jRRHfhx5jbBVVJ5n6BnF/Mos24g7KI1VPis3Wr
 XZQibxLW0kZ7/hTHykZCff8D4aNqR4fT/UCKyy2Xw1aR0zkD9ZAQq5oWhL99lsnt
 cCe9GBP0Lum9Zq9jjMwL
 =SwMB
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux

Pull clock framework updates from Mike Turquette:
 "The common clock framework changes for 3.11 include new clock drivers
  across several different platforms and architectures, fixes to
  existing drivers, a MAINTAINERS file fix and improvements to the basic
  clock types that allow them to be of use to more platforms than before.

  Only a few fixes to the core framework are included with most all of
  the changes landing in the various clock drivers themselves."

* tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux: (55 commits)
  clk: tegra: fix ifdef for tegra_periph_reset_assert inline
  clk: tegra: provide tegra_periph_reset_assert alternative
  clk: exynos4: Fix clock aliases for cpufreq related clocks
  clk: samsung: Add MUX_FA macro to pass flag and alias
  clk: add support for Rockchip gate clocks
  clk: vexpress: Make the clock drivers directly available for arm64
  clk: vexpress: Use full node name to identify individual clocks
  clk: tegra: T114: add DFLL DVCO reset control
  clk: tegra: T114: add DFLL source clocks
  clk: tegra: T114: add FCPU clock shaper programming, needed by the DFLL
  clk: gate: add CLK_GATE_HIWORD_MASK
  clk: divider: add CLK_DIVIDER_HIWORD_MASK flag
  clk: mux: add CLK_MUX_HIWORD_MASK
  clk: Always notify whole subtree when reparenting
  MAINTAINERS: make drivers/clk entry match subdirs
  clk: honor CLK_GET_RATE_NOCACHE in clk_set_rate
  clk: use clk_get_rate() for debugfs
  clk: tegra: Use override bits when needed
  clk: tegra: override bits for Tegra30 PLLM
  clk: tegra: override bits for Tegra114 PLLM
  ...
2013-07-03 11:54:50 -07:00
Philippe Begnic a6a3ec7b51 clk: ux500: Clocks definition for u8540
First clocks definition version of PRCMU and PRCC clocks for u8540 platform

Signed-off-by: Philippe Begnic <philippe.begnic@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-06 18:17:25 -07:00
Philippe Begnic 1237e598a9 clk: ux500: Pass clock base adresses in initcall for u8540 and u9540
Align on u8500 version, pass clock base address in clk_init functions
for u8540 and u9540.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Philippe Begnic <philippe.begnic@st.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-06 18:16:04 -07:00
Fabio Baltieri f586938ba2 clk: ux500: clk-sysctrl: handle clocks with no parents
Fix clk_reg_sysctrl() to set main clock registers of new struct
clk_sysctrl even if the registered clock has no parents.

This fixes an issue where "ulpclk" was registered with all clk->reg_*
fields uninitialized, causing a -EINVAL error from clk_prepare().

Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-29 11:52:18 -07:00
Lee Jones dd47044803 clk: ux500: Provide device enumeration number suffix for SMSC911x
First Ethernet device has a ".0" appended onto the device name. It
appears that we need this in order to obtain the correct clock.

Without this fix Ethernet does not function on Ux500 devices, which is a
regression.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: improved changelog]
2013-05-29 11:52:18 -07:00