Most of our DP encoder hooks are split into per-platform variants.
.disable() an exception, and thus it's a bit messy. Let's split it
up as well. We'll leave the common parts in a helper called by
each platform specific hook. Now each platform has mostly its own
hooks. Some hooks are still shared between vlv and chv, and between
g4x and ilk. None of the remaining shared hooks have any platform
checks in them however so duplicating them doesn't seem particularly
useful.
There is a subtle change on VLV/CHV where we now disable PSR before
audio, whereas before we disabled PSR after audio. That should be
totally fine, and PSR is disabled by default anyway. Jani also pointed
out to me that PSR + audio doesn't seem like a particularly realistic
combination.
v2: Drop the PSR HAS_DDI check here (Rodrigo)
Pimp up the commit message a bit based on a chat with Jani
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170920151251.5961-1-ville.syrjala@linux.intel.com
It is safe to call intel_psr_disable() on a platform without PSR. We
don't have such a check when calling intel_psr_enable() either.
v2: Don't drop the HAS_DDI check quite yet (Rodrigo)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170920151236.5864-1-ville.syrjala@linux.intel.com
On kbl evidence indicates that even if the hardware happily
tells us to proceed with reset, it really isn't ready.
Resetting a freely running batchbuffer after we have ack for readiness,
still can cause a system hang.
We also have similar experiences on older gens. So now
attempt to stop engines before proceeding for reset, on all
gens where we have a gpu reset. This has shown to improve reset
reliability and reduce the risk of losing the machine.
v2: Add fixme for wa (Joonas)
Testcase: igt/prime_busy/hang-* # kbl
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919144128.25506-1-mika.kuoppala@intel.com
drm_edid_to_eld() initializes the connector ELD to zero, overwriting the
ELD connector type initialized in intel_audio_codec_enable(). If
userspace does getconnector and thus get_modes after modeset, a
subsequent audio component i915_audio_component_get_eld() call will
receive an ELD without the connector type properly set. It's fine for
HDMI, but screws up audio for DP.
Always set the ELD connector type at intel_connector_update_modes()
based on the connector type. We can drop the connector type update from
intel_audio_codec_enable().
Credits to Joseph Nuzman <jnuzman@gmail.com> for figuring this out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joseph Nuzman <jnuzman@gmail.com>
Reported-by: Joseph Nuzman <jnuzman@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101583
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Joseph Nuzman <jnuzman@gmail.com>
Cc: stable@vger.kernel.org # v4.10+, maybe earlier
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919153813.29808-1-jani.nikula@intel.com
Function hdmi_mode_fixup() used bare list_for_each entry, which was
unsafe and caused memory corruption detected by kasan.
It now uses drm_for_each_connector_iter macro, which is now recommended
by the documentation and safe.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We now have Coffee Lake on our CI systems.
Coffee Lake is at this point in same stage as Kaby Lake.
And it seems that we don't have any risk of bad blank
screens or anything like that. So let's remove the protection.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230632.25650-1-rodrigo.vivi@intel.com
"CNL PCH chance of hang when software accesses south display
registers after hotplug is enabled.
Workaround: Program 0xC2000 bits 11:8 = 0xF before enabling
south display hotplug detection."
"Workaround only needs to be applied to pre-production steppings
used in graphics capable SKUs, but it is easier to apply to
everything, and does not hurt."
v2: Moving from clock gating to right before enabling
SHOTPLUG_CTL as it should be.
v3: Align with SOUTH_CHICKEN1 (DK) and consequently use proper
spaces on bits definition since other bits around already use
new style. And now that checkpatch is not noise anymore I also
fixed the reg read mask to avoid going over 80 chars.
Suggested-by: Ben Widawsky <ben@bwidawsk.net>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919215703.25947-1-rodrigo.vivi@intel.com
Add drm_kms_helper.edid_firmware module parameter with param ops hooks
to set drm.edid_firmware instead, for backwards compatibility.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918182003.22238-2-jani.nikula@intel.com
Handle debugfs override edid and firmware edid at the low level to
transparently and completely replace the real edid. Previously, we
practically only used the modes from the override EDID, and none of the
other data, such as audio parameters.
This change also prevents actual EDID reads when the EDID is to be
overridden, but retains the DDC probe. This is useful if the reason for
preferring override EDID are problems with reading the data, or
corruption of the data.
Move firmware EDID loading from helper to core, as the functionality
moves to lower level as well. This will result in a change of module
parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which
arguably makes more sense anyway.
Some future work remains related to override and firmware EDID
validation. Like before, no validation is done for override EDID. The
firmware EDID is validated separately in the loader. Some unification
and deduplication would be in order, to validate all of them at the
drm_do_get_edid() level, like "real" EDIDs.
v2: move firmware loading to core
v3: rebase, commit message refresh
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8a710bcac46e5136c1a7b430074893c81f364a.1505203831.git.jani.nikula@intel.com
A fence may be signaled from any context, including from inside a timer.
One example is timer_i915_sw_fence_wake() which is used to provide a
safety-net when waiting on an external fence. If the external fence is
not signaled within a timely fashion, we signal our fence on its behalf,
and so we then may process subsequent fences in the chain from within
that timer context.
Given that dma_i915_sw_fence_wake() may be from inside a timer, we cannot
then use del_timer_sync() as that requires the timer lock for itself. To
circumvent this, while trying to keep the signal propagation as low
latency as possible, move the completion into a worker and use a bit of
atomic switheroo to serialise the timer-callback and the dma-callback.
Testcase: igt/gem_eio/in-flight-external
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170911084135.22903-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
I ran into a build error on x86:
drivers/gpu/drm/exynos/exynos5433_drm_decon.c: In function 'decon_conf_irq':
drivers/gpu/drm/exynos/exynos5433_drm_decon.c:706:2: error: implicit declaration of function 'irq_set_status_flags'; did you mean 'dquot_state_flag'? [-Werror=implicit-function-declaration]
irq_set_status_flags(irq, IRQ_NOAUTOEN);
Adding the missing include fixes the error.
Fixes: b37d53a038 ("drm/exynos/decon5433: move TE handling to DECON")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Commit 7d902c05b4 ("drm: Nuke drm_atomic_helper_connector_dpms")
removed drm_atomic_helper_connector_dpms() helper saying that it was a dead
code. It was however indirectly used by Exynos DRM driver for implementing
suspend/resume support. To fix this regression (after that patch Exynos DRM
suspend/resume functions became no-ops and hardware fails to suspend),
this patch rewrites them with drm_atomic_helper_suspend/resume() helpers.
Fixes: 7d902c05b4 ("drm: Nuke drm_atomic_helper_connector_dpms")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Commit 48a9291672 ("drm/exynos: use drm_for_each_connector_iter()")
replaced unsafe drm_for_each_connector() with drm_for_each_connector_iter()
and removed surrounding drm_modeset_lock calls. However, that lock was
there not only to protect unsafe drm_for_each_connector(), but it was also
required to be held by the dpms code which was called from the loop body.
This patch restores those drm_modeset_lock calls to fix broken suspend
and resume of Exynos DRM subsystem in v4.13 kernel.
Fixes: 48a9291672 ("drm/exynos: use drm_for_each_connector_iter()")
CC: stable@vger.kernel.org # v4.13
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
archdata.iommu only exists when CONFIG_IOMMU_API is enabled (and only
applies to intel-iommu in our case) so conditionally compile it out when
it doesn't exist.
Fixes: b5891fb520 ("drm/i915/selftests: Disable iommu for the mock device")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918164652.14200-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
put amd_pm_funcs table in struct powerplay for all
asics.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
renamed amdgpu_dpm_funcs and moved to amd_shared.h
so can shared with powerplay.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
delete functiontable related codes
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use function points instand of function table.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. add function points instand of creat function tables
2. implement stop dpm tasks for CZ/ST
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add function point start_thermal_controller in hwmgr,
delete thermal function table and related functions
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The structure returned from r600_audio_status() is only partially
initialized, and older gcc versions (4.3 and 4.4) warn about this:
drivers/gpu/drm/radeon/r600_hdmi.c: In function 'r600_audio_status':
drivers/gpu/drm/radeon/r600_hdmi.c:108: error: 'status.id' is used uninitialized in this function
drivers/gpu/drm/radeon/r600_hdmi.c:108: error: 'status.connected' is used uninitialized in this function
drivers/gpu/drm/radeon/r600_hdmi.c:108: error: 'status.offset' is used uninitialized in this function
This is harmless and surprisingly correct in C99, as the caller
only accesses the fields that got initialized, so newer compilers
don't warn about it, but initializing the entire structure feels
like the right thing to do here and avoids the warning.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't touch other bits. My bad.
I haven't seen any case where those other bits appeard to be
set before we touch it, but it is safe to avoid touching
other bits we weren't told to touch.
Fixes: 0a46ddd57c ("drm/i915/cnp: Wa 1181: Fix Backlight issue")
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908234534.17986-1-rodrigo.vivi@intel.com
Commit 1bf6ad622b ("drm/vblank: drop the mode argument from
drm_calc_vbltimestamp_from_scanoutpos") removed the use of in_vbl, but
did not remove the local variable. Do so now.
Fixes: 1bf6ad622b ("drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914164213.18461-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit e01e71fc49)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Min brightness value from vbt was missing for CNP platform.
This setting have to refer backlight ic spec to restrict
min backlight output. Without this restriction, driver would
allow to configure lower brightness value and violate
backlight ic requirement.
Fixes: 4c9f7086ac ("drm/i915/cnp: Backlight support for CNP.")
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505279961-16140-1-git-send-email-shawn.c.lee@intel.com
(cherry picked from commit f44e354f85)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit bbdf0b2ff3 ("drm/i915/bxt: Disable device ready
before shutdown command").
Disable device ready before shutdown command was added previously to
avoid a split screen issue seen on dual link DSI panels. As of now, dual
link is not supported and will need some rework in the upstream
code. For single link DSI panels, the change is not required. This will
cause failure in sending SHUTDOWN packet during disable. Hence reverting
the change. Will handle the change as part of dual link enabling in
upstream.
Fixes: bbdf0b2ff3 ("drm/i915/bxt: Disable device ready before shutdown command")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504604671-17237-1-git-send-email-vidya.srinivas@intel.com
(cherry picked from commit 33c8d8870c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Min brightness value from vbt was missing for BXT platform.
This setting have to refer backlight ic spec to restrict
min backlight output. Without this restriction, driver would
allow to configure lower brightness value and violate
backlight ic requirement.
Fixes: 0fb890c013 ("drm/i915/bxt: BLC implementation")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Gary C Wang <gary.c.wang@intel.com>
Signed-off-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505187390-7039-1-git-send-email-shawn.c.lee@intel.com
(cherry picked from commit c3881128cb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We should go through the error handling path to decrease the
'framebuffer_references' as done everywhere else in this function.
Fixes: 2e2adb0573 ("drm/i915: Add render decompression support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170910085642.13673-1-christophe.jaillet@wanadoo.fr
(cherry picked from commit 37875d6b3a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looking at our virtual PCI device, we can see surprising Region 4 and Region 5.
00:10.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller])
....
Region 0: Memory at 140000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 180000000 (64-bit, prefetchable) [size=1G]
Region 4: Memory at <ignored> (32-bit, non-prefetchable)
Region 5: Memory at <ignored> (32-bit, non-prefetchable)
Expansion ROM at febd6000 [disabled] [size=2K]
The fact is that we only implemented BAR0 and BAR2. Surprising Region 4 and
Region 5 are shown because we report their size as 0xffffffff. They should
report size 0 instead.
BTW, the physical GPU has a PIO BAR. GVTg hasn't implemented PIO access, so
we ignored this BAR for vGPU device.
v2: fix BAR size value calculation.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit f1751362d6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some platforms do not support PSR and DRRS simultaneously.
Visual artifacts and flickering were reported on BDW HP Spectre
x360 Convertible. Deferring to PSR when both PSR and DRRS are
supported by the panel.
V2: Minor code-style changes suggested by Rodrigo
V3: Add a WARN_ON during PSR init suggested by Dhinakaran
Correct debug message,title suggested by Jani
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101111
Cc: Nicholas Stommel <nicholas.stommel@gmail.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914181641.24393-1-radhakrishna.sripada@intel.com
On some machines, the iommu cannot allocate a domain for the mock device
causing the dma_map_sg() to fail, and the selftest to fail with -ENOMEM.
For the mock selftests, we are using a fake device and do not care about
iommu; so convince intel_iommu to treat us as a dummy device with an
identity mapping (and no iommu domain).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101080
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914162240.18310-1-chris@chris-wilson.co.uk
Tested-by: Elizabeth De La Torre Mena <elizabethx.de.la.torre.mena@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com
The cache attribute of the required entry has to be the same with the
existing value. After this requirement is met, the futher comparison
should be performed. After this fix, the refined test case can pass.
v2:
- Refine the tittle and comments. (Rodrigo)
Fixes: 4395890a48 ("drm/i915: Introduce private PAT management")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505741794-10593-1-git-send-email-zhi.a.wang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We can just operate on the wq_tail directly (in the process descriptor).
This allows us to remove the duplicated tail from the client. While I'm
here let's also remove the constants kept in the client and document our
locking requirements. This causes a small change in one of GuC debugfs
files. We're no longer reporting constant values (which I don't think
is a problem), but we're also no longer reporting the tail (does anyone
care?).
v2: Update tail after wqi contents. (Chris)
v3: Really update tail after wqi contents.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918092536.12287-1-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
All we're really doing is incrementing a simple counter in a
doorbell_info struct. We can do without extra variables and a separate
counter kept in guc_client. Since it's gone, we're also removing its
debugfs.
The only functional change here, is that we're no longer treating 0 as a
special value. GuC doesn't seem to care, why should we?
v2: Restore desc->tail update.
v3: Drop the retry loop, assert that doorbell cookie doesn't change
behind our back.
v4: WARN rather than BUG, use xchg. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914105125.3031-1-michal.winiarski@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
To create an upper bound on number of GuC workitems, we need to change
the way that requests are being submitted. Rather than submitting each
request as an individual workitem, we can do coalescing in a similar way
we're handlig execlist submission ports. We also need to stop pretending
that we're doing "lite-restore" in GuC submission (we would create a
workitem each time we hit this condition). This allows us to completely
remove the reservation, replacing it with a compile time check.
v2: Also coalesce when replaying on reset (Daniele)
v3: Consistent wq_resv - per-request (Daniele)
v4: Squash removing wq_resv
v5: Reflect i915_guc_submit argument changes in doc
v6: Rebase on top of execlists reset/restart fix (Chris,Michał)
References: https://bugs.freedesktop.org/show_bug.cgi?id=101873
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-2-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Originally removed in:
c1adab9703 ("drm/i915/guc: Remove failed doorbell stat from debugfs")
f1448a62a1 ("drm/i915/guc: Remove last submission result from debugfs")
Were accidentally restored in:
925344ccc9 ("BackMerge tag 'v4.12-rc5' into drm-next")
We can also remove unused variable and replace it with a WARN.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-1-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Given the mechanism to unwind and replay requests (designed to support
preemption), we have an alternative to the current method of
resubmitting the ELSP upon reset. Resubmitting ELSP turns out to be more
complicated than expected, due to having to handle lost context-switch
interrupts and so guessing what ELSP we need to resubmit later. Instead,
by unwinding the requests and clearing the ELSP tracking entirely, we
can then just dequeue the first pair of ready requests after resetting,
using the normal submission procedure.
Currently, the unwound requests have maximum priority and so are
guaranteed to be resubmitted upon resume. If we are lucky, we may be
able to coalesce a new request on top!
Suggested-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170916204414.32762-4-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
In the next patch we will want to reinsert a request not at the end of
the priority queue, but at the front. Here we split insert_request()
into two, the first function retrieves the priority list (for reuse for
unsubmit later) and a wrapper function to insert at the end of that list
and to schedule the tasklet if we were first.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170916204414.32762-3-chris@chris-wilson.co.uk
During a reset, we may skip over completed requests and lost
context-switch interrupts. Following the reset, we may then may end up
with no active requests in the ELSP (and so do not resubmit to restart
the engine), but have a queue of requests ready for execution. This is
unlikely, it requires the last request to complete after the hang is
detected, but not impossible. The outcome of this is that the engine
stalls, possibly leading to full ring and indefinite wait under
struct_mutex, eventually leading to a full driver hang.
Alternatively, we can solve this by unsubmitting the incomplete requests
and just kickstarting the tasklet. Michał has patches for that, which I
initially disliked due to the extra complexity, but the complexity of
this "simple" restart is growing...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170916204414.32762-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
When wedging the hw, we want to mark all in-flight requests as -EIO.
This is made slightly more complex by execlists who store the ready but
not yet submitted-to-hw requests on a private queue (an rbtree
priolist). Call into execlists to cancel not only the ELSP tracking for
the submitted requests, but also the queue of unsubmitted requests.
v2: Move the majority of engine_set_wedged to the backends (both legacy
ringbuffer and execlists handling their own lists).
Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Testcase: igt/gem_eio/in-flight-contexts
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170915173100.26470-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
some trivial amdkfd cleanups
* tag 'drm-amdkfd-next-2017-09-02' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: pass queue's mqd when destroying mqd
drm/amdkfd: remove memset before memcpy
uapi linux/kfd_ioctl.h: only use __u32 and __u64
This patch replace instances of dev_info/err/debug with
DRM_DEV_INFO/ERROR/WARN respectively inorder to use a drm-formatted
specific log messages. Issue corrected with the help of the following
Coccinelle script:
@r@
@@
(
-dev_info
+DRM_DEV_INFO
|
-dev_err
+DRM_DEV_ERROR
|
-dev_dbg
+DRM_DEV_DEBUG
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170915083603.GA18992@Haneen
No need to put out a driver registered message since drm_dev_register()
does that now. SPI speed is an important metric when dealing with
display problems, so retain that info.
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504883250-43487-8-git-send-email-noralf@tronnes.org
GEM lookup failure can easily be triggered by userspace so make
it a debug message, not an error message.
Also remove unnecessary inner parentheses and fix alphabetical
struct declaration order.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505147865-18194-2-git-send-email-noralf@tronnes.org
The HDMI codec platform data is global driver state shared by all
instances. As such it should not be modified (and is not), to make this
explicit declare it as const.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905121018.11477-4-lars@metafoo.de
Fall back to polling the connector for connect and disconnect events when
no interrupt is specified. Otherwise these events will not be noticed and
monitor hotplug does not work.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905121018.11477-3-lars@metafoo.de
The adv7511 driver keeps a private copy of the EDID in its driver state
struct. But this copy is only used in adv7511_get_modes() where it is also
retrieved, so there is no need to keep this extra copy around.
If a need to access the EDID elsewhere in the driver ever arises the copy
that is stored in the connector can be used. This copy is accessible
through drm_connector_get_edid().
Note, this patch removes the NULL check of the EDID before passing it to
drm_detect_hdmi_monitor(), but that is fine since the function correctly
handles the case where the EDID is NULL.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905121018.11477-2-lars@metafoo.de
Currently adv7511_get_modes() bails out early when no EDID could be
retrieved. This leaves the previous EDID in place, which is typically not
the intended behavior and might confuse applications. Instead the EDID
should be cleared when no EDID could be retrieved.
All functions that are called after the EDID check handle the case where
the EDID is NULL just fine and exhibit the expected behavior, so just drop
the check.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905121018.11477-1-lars@metafoo.de
Now that we're not using MSI anymore on gen4 we can start
using GMBUS and AUX interrupts again. These were disabled on
account of them causing the hardware to somehow generate
legacy interrupts even when MSI was enabled.
See commit c12aba5aa0 ("drm/i915: stop using GMBUS IRQs on Gen4
chips") and commit 4e6b788c3f ("drm/i915: Disable dp aux irq on
g4x") for more details.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-17-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Currently we're unmasking some random looking bits in HWSTAM
on gen3/4/5. The two bits we apparently unmask are 0 and 12,
and also bits 16-31 on gen4/5.
What those bits do depends on the gen as follows:
bit 0: Breakpoint (gen2), ASLE (gen3), reserved (gen4), render user interrupt (gen5)
bit 12: Sync flush statusa (gen2-4), reserved (gen5)
bit 16-31: The ones that can unmasked seem to be mostly some
display stuff on gen4. Bit 18 is the PIPE_CONTROL notify,
which might be the only intresting one. On gen5 all the
bits are reserved.
So I don't know whether we actually depend on that status page write
somehow. Extra seqno coherency by accident perhaps? Except we don't
even unmask the user interrupt bit in HWSTAM except on gen5, and
sync flush isn't something we use normally, so seems unlikely. So
let's just assume we don't need any of this and mask everything in
HWSTAM.
From gen6 onwards there's a separate HWSTAM for each engine, and so
we deal with them during the engine setup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-15-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The execlist code already masks everything in the ring HWSTAM, but
the ringbuffer code doesn't. Let's go ahead and do that. Pre-gen6
platforms setup HWSTAM during irq setup already since there's just
the one register, and it also contains bits for non-ring interrupts.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-13-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We're always specifying description of each module param in
separate macro. Let's combine description into our main macro.
Started with Coccinelle, followed by minor cleanup.
@match1@
declarer name MODULE_PARM_DESC;
identifier n;
constant c;
@@
(
- MODULE_PARM_DESC(n, c);
)
@fix1 depends on match1@
declarer name i915_param_named;
declarer name i915_param_named_unsafe;
identifier match1.n;
constant match1.c;
@@
(
i915_param_named(n, ...
+ , c
);
|
i915_param_named_unsafe(n, ...
+ , c
);
)
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914150805.28376-4-michal.wajdeczko@intel.com
As we now use same name for public module param and its local
representation we can simplify param definition macro.
Changes done with Coccinelle:
@@
declarer name module_param_named;
declarer name module_param_named_unsafe;
declarer name i915_param_named;
declarer name i915_param_named_unsafe;
identifier n;
@@
(
-module_param_named(n, i915.n,
+i915_module_param_named(n,
...);
|
-module_param_named_unsafe(n, i915.n,
+i915_module_param_named_unsafe(n,
...);
)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914150805.28376-3-michal.wajdeczko@intel.com
This modparam affects not only LVDS but also eDP panels. Additionally
with this rename we will keep modparam and i915_params field name in sync.
This patch will unblock us with further improvements around params defs.
Suggested-by: Ville Syrjala <ville.syrjala@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914150805.28376-2-michal.wajdeczko@intel.com
Commit 1bf6ad622b ("drm/vblank: drop the mode argument from
drm_calc_vbltimestamp_from_scanoutpos") removed the use of in_vbl, but
did not remove the local variable. Do so now.
Fixes: 1bf6ad622b ("drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914164213.18461-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Pull dmi update from Jean Delvare:
"Mark all struct dmi_system_id instances const"
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
dmi: Mark all struct dmi_system_id instances const
No functional changes. Only change the macro from
"DPLL_CFGCR0_DC0_FRAC_SHIFT to DPLL_CFGCR0_DCO_FRACTION_SHIFT
to be consistent with DPLL_CFGCR0_DCO_FRACTION_MASK
and DPLL_CFGCR0_DCO_FRACTION
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505413899-30876-1-git-send-email-manasi.d.navare@intel.com
Bspec claims that HWSTAM is only 16 bits on gen3, but the other
interrupts registers are 32 bits and there are 18 valid interrupt
bits. Hence a 16 bit HWSTAM wouldn't be able to contain all the
bits, so it seems the spec is incorrect about the size of the
register. And indeed I can clear bits 16 and 17 just fine with
a 32 bit write. So let's adjust the code to treat the register
as 32 bits.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-14-ville.syrjala@linux.intel.com
Eliminate the loops from the gen2-3 irq handlers. Since we don't use
MSI anymore on these platforms, and thus the CPU interrupt will be level
triggered, we shouldn't need to play any tricks with IER to induce edges
from IIR. IIR itself still detects only edges from PIPESTAT & co. on
gen4 but since IIR is double buffered and we only clear one bit per irq
handler invocation we can use the normal "clear PIPESTAT & co. -> clear
IIR" approach to ack the interrupts. On gen2 everything is level
triggered, and gen3 presumably follows either the gen2 or gen4 approach
since nothing else would really make sense.
v2: Drop the IER tricks since we no longer use MSI
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-12-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Extract the gen2-4 PIPESTAT irq handling into separate functions just
like we already do on VLV/CHV.
We can share valleyview_pipestat_irq_ack() on all gmch platforms to
actually read and clear the PIPESTAT status bits, so let's rename
it to i9xx_pipestat_irq_ack().
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-11-ville.syrjala@linux.intel.com
There should be no way to land in irq_uninstall without a
valid dev_priv. Let's kill off the remaining checks, which are
probably some kind of UMS leftovers. Not all the irq_uninstall
hooks even had them anymore.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-10-ville.syrjala@linux.intel.com
The GEN5_IRQ_RESET/INIT macros are perfectly suitable even for
gen3/4 hardware as those have 32 bit interrupt registers. Let's
rename the macros to reflect that fact.
Gen2 on the other hand has 16 bit interrupt registers so these
macros aren't really appropriate there.
v2: Fix patch subject (Maarten)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-4-ville.syrjala@linux.intel.com
We have a lot of different ways of clearing the PIPESTAT registers.
Let's unify it all into one function. There's no magic in PIPESTAT
that would require any of the double clearing and whatnot that
some of the code tries to do. All we can really do is clear the status
bits and disable the enable bits. There is no way to mask anything
so as soon as another event happens the status bit will become set
again, and trying to clear them twice or something can't protect
against that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
commit fd3a40242e ("drm/i915: Rip out legacy page_flip completion/irq
handling") removed the code to hande the flip done/pending interrupts,
but it failed to actually disable/mask those interrupts. Let's do that
now.
Also remove a stale comment that was left behind.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Remove the "INDEX" suffix from PPAT marcos as they are bits actually, not
indexes.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505392783-4084-2-git-send-email-zhi.a.wang@intel.com
The private PAT management is to support PPAT entry manipulation. Two
APIs are introduced for dynamically managing PPAT entries: intel_ppat_get
and intel_ppat_put.
intel_ppat_get will search for an existing PPAT entry which perfectly
matches the required PPAT value. If not, it will try to allocate a new
entry if there is any available PPAT indexs, or return a partially
matched PPAT entry if there is no available PPAT indexes.
intel_ppat_put will put back the PPAT entry which comes from
intel_ppat_get. If it's dynamically allocated, the reference count will
be decreased. If the reference count turns into zero, the PPAT index is
freed again.
Besides, another two callbacks are introduced to support the private PAT
management framework. One is ppat->update_hw(), which writes the PPAT
configurations in ppat->entries into HW. Another one is ppat->match, which
will return a score to show how two PPAT values match with each other.
v17:
- Refine the comparision of score of BDW. (Joonas)
v16:
- Fix a bug in PPAT match function of BDW. (Joonas)
v15:
- Refine some code flow. (Joonas)
v12:
- Fix a problem "not returning the entry of best score". (Zhenyu)
v7:
- Keep all the register writes unchanged in this patch. (Joonas)
v6:
- Address all comments from Chris:
http://www.spinics.net/lists/intel-gfx/msg136850.html
- Address all comments from Joonas:
http://www.spinics.net/lists/intel-gfx/msg136845.html
v5:
- Add check and warnnings for those platforms which don't have PPAT.
v3:
- Introduce dirty bitmap for PPAT registers. (Chris)
- Change the name of the pointer "dev_priv" to "i915". (Chris)
- intel_ppat_{get, put} returns/takes a const intel_ppat_entry *. (Chris)
v2:
- API re-design. (Chris)
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v7
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[Joonas: Use BIT() in the enum in bdw_private_pat_match]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505392783-4084-1-git-send-email-zhi.a.wang@intel.com
Use the LLC/eLLC hotspot avoidance mode for CCS on LLC machines. This is
reported to give better performance.
Testing has indicated that we don't need to enforce any massive 2 or 4
MiB alignment for all compressed resources even though there are still
plenty of stale comments in the spec suggesting that we do.
We do need to make sure every hardware unit that deals with the
compressed data uses the same hash mode.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-4-ville.syrjala@linux.intel.com
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Convert to use the freshly available made INTEL_GEN_MASK for easier
grepping and improve function readability and clarify the UABI
documentation.
No functional changes.
v2:
- Lift GEM_BUG_ONs and use is_power_of_2 (Chris)
- Retain -EINVAL on bad flags behavior (Chris)
v3:
- Extract flags with 'entry->size - 1' (Chris)
v4:
- Add GEM_BUG_ON on for flags vs entry offset (Chris)
v5:
- Use 'u16' to match 'dev_priv' (Ville)
v6:
- Fix checkpatch.pl errors
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913115255.13851-2-joonas.lahtinen@linux.intel.com
Split INTEL_GEN_MASK out of IS_GEN macro, and make it usable
within static declarations (unlike compound statements).
v2:
- s/combound/compound/ (Tvrtko)
- Fix whitespace (yes, we need automatic checkpatch.pl)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913115255.13851-1-joonas.lahtinen@linux.intel.com
GFP_TEMPORARY was introduced by commit e12ba74d8f ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DK had pointed out a comment there was hard to understand, so I
tried to read back again and I couldn't understand that as well.
So let me re-phrase that in a way that anyone can understand
later, even myself.
Also fixed the comment block style.
v2: Accept DK's suggestion on PSR_state 2 and PSR_state 3 named
as spec.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912183059.5086-1-rodrigo.vivi@intel.com
The engine also provides a mirror of the CSB write pointer in the HWSP,
but not of our read pointer. To take advantage of this we need to
remember where we read up to on the last interrupt and continue off from
there. This poses a problem following a reset, as we don't know where
the hw will start writing from, and due to the use of power contexts we
cannot perform that query during the reset itself. So we continue the
current modus operandi of delaying the first read of the context-status
read/write pointers until after the first interrupt. With this we should
now have eliminated all uncached mmio reads in handling the
context-status interrupt, though we still have the uncached mmio writes
for submitting new work, and many uncached mmio reads in the global
interrupt handler itself. Still a step in the right direction towards
reducing our resubmit latency, although it appears lost in the noise!
v2: Cannonlake moved the CSB write index
v3: Include the sw/hwsp state in debugfs/i915_engine_info
v4: Also revert to using CSB mmio for GVT-g
v5: Prevent the compiler reloading tail (Mika)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-6-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
The engine provides a mirror of the CSB in the HWSP. If we use the
cacheable reads from the HWSP, we can shave off a few mmio reads per
context-switch interrupt (which are quite frequent!). Just removing a
couple of mmio is not enough to actually reduce any latency, but a small
reduction in overall cpu usage.
Much appreciation for Ben dropping the bombshell that the CSB was in the
HWSP and for Michel in digging out the details.
v2: Don't be lazy, add the defines for the indices.
v3: Include the HWSP in debugfs/i915_engine_info
v4: Check for GVT-g, it currently depends on intercepting CSB mmio
v5: Fixup GVT-g mmio path
v6: Disable HWSP if VT-d is active as the iommu adds unpredictable
memory latency. (Mika)
v7: Also markup the CSB read with READ_ONCE() as it may still be an mmio
read and we want to stop the compiler from issuing a later (v.slow) reload.
Suggested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913133534.26927-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
We need to free the reservation object before we take the BO
from the delayed delete list.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We adjusted the BO flags for USWC handling, but those never took effect
because the placement was passed in instead of generated inside this
function.
v2: better commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nobody is actually using this and it causes a bunch of unused and buggy code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This always allocated on PAGE_SIZE alignment.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes crash when trying to unload the radeon module before the fbdev
framebuffer was initialized, which can happen since the DRM fbdev helper
code supports deferred setup.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes crash when trying to unload the amdgpu module before the fbdev
framebuffer was initialized, which can happen since the DRM fbdev helper
code supports deferred setup.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no guarantee that the last BO_VA actually needed an update.
Additional to that all command submissions must wait for moved BOs to
be cleared, not just the first one.
v2: Don't overwrite any newer fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At the time of commit 1f767e02d6 ("drm/i915: HWS must be in the
mappable region for g33"), drm_mm insertion would often default to
placing a new object high in the zone forcing us to specify that certain
HWSP must be bound within the low mappable region. Since then, drm_mm
has gained more finesse over its placement and exposes that to the
caller, commit 4e64e5539d ("drm: Improve drm_mm search (and fix
topdown allocation) with rbtrees"). As such where possible we want the
HWSP to be outside of the mappable aperture and so need to specify that
can be pinned high.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-4-chris@chris-wilson.co.uk
On gen8+ we're currently using the PPHWSP of the kernel ctx as the
global HWSP. However, when the kernel ctx gets submitted (e.g. from
__intel_autoenable_gt_powersave) the HW will use that page as both
HWSP and PPHWSP. This causes a conflict in the register arena of the
HWSP, i.e. dword indices below 0x30. We don't current utilize this arena,
but in the following patches we will take advantage of the cached
register state for handling execlist's context status interrupt.
To avoid the conflict, instead of re-using the PPHWSP of the kernel
ctx we can allocate a separate page for the HWSP like what happens for
pre-execlists platform.
v2: Add a use-case for the register arena of the HWSP.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499357440-34688-1-git-send-email-daniele.ceraolospurio@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-3-chris@chris-wilson.co.uk
Using the HWSP ggtt_offset to get the lrca offset is only correct if the
HWSP happens to be before it (when we reuse the PPHWSP of the kernel
context as the engine HWSP). Instead of making this assumption, get the
lrca offset from the kernel_context engine state.
And while looking at this part of the GuC interaction, it was also
noticed that the firmware expects the size of only the engine context
(context minus the execlist part, i.e. don't include the first 80
dwords), so pass the right size.
v2: Use the new macros to prevent abusive overuse of the old ones (Chris).
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712193032.27080-2-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-2-chris@chris-wilson.co.uk
Not only the context image consist of two parts (the PPHWSP, and the
logical context state), but we also allocate a header at the start of
for sharing data with GuC. Thus every lrc looks like this:
| [guc] | [hwsp] [logical state] |
|<- our header ->|<- context image ->|
So far, we have oversimplified whenever we use each of these parts of the
context, just because the GuC header happens to be in page 0, and the
(PP)HWSP is in page 1. But this had led to using the same define for more
than one meaning (as a page index in the lrc and as 1 page).
This patch adds defines for the GuC shared page, the PPHWSP page and the
start of the logical state. It also updated the places where the old
define was being used. Since we are not changing the size (or format) of
the context, there are no functional changes.
v2: Use PPHWSP index for hws again.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170712193032.27080-1-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-1-chris@chris-wilson.co.uk
As realised by commit 9e3d6223d2 ("math64, timers: Fix 32bit
mul_u64_u32_shr() and friends"), GCC does not always generate ideal code
for performing a 32b x 32b multiply returning a 64b result (i.e. where
we idiomatically use u64 result = (u64)x * (u32)x).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913105154.2910-2-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
As realised by commit 9e3d6223d2 ("math64, timers: Fix 32bit
mul_u64_u32_shr() and friends"), GCC does not always generate ideal code
for performing a 32b x 32b multiply returning a 64b result (i.e. where
we idiomatically use u64 result = (u64)x * (u32)x). This catches a
couple of instances in the display code using (u64)x * (u32)y.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913105154.2910-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The sgt iterators cause an
drivers/gpu/drm/i915/i915_gpu_error.c:846 i915_error_object_create() warn: statement has no effect 7
everywhere they are used. If we change the code slightly, we can achieve
the same increment without altering the output or raising a warning.
text data bss dec hex filename
1267906 20587 3168 1291661 13b58d before
1267906 20587 3168 1291661 13b58d after
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913105754.4423-1-chris@chris-wilson.co.uk
We never used it in i915 and it's going to be removed
in newer GuC firmwares anyway.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505252197-27696-2-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The default values for the default scheduling policy come from the
GuC firmware itself. Transform the magic numbers into defines.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505252197-27696-1-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The context descriptor is stored inside the per-engine context state, as
we only need to compute it once and access it frequently. However,
currently only intel_lrc.c has easy access, but i915_guc_submission.c
would like to frequently read it as well, and more so only ever needs
the lower 32bits. Make it an inline as the compiler should be able to
retrieve the value in less instructions than it takes to do the function
call:
add/remove: 0/1 grow/shrink: 1/0 up/down: 8/-45 (-37)
function old new delta
i915_guc_submit 621 629 +8
intel_lr_context_descriptor 45 - -45
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912214905.21987-1-chris@chris-wilson.co.uk
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Min brightness value from vbt was missing for CNP platform.
This setting have to refer backlight ic spec to restrict
min backlight output. Without this restriction, driver would
allow to configure lower brightness value and violate
backlight ic requirement.
Fixes: 4c9f7086ac ("drm/i915/cnp: Backlight support for CNP.")
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505279961-16140-1-git-send-email-shawn.c.lee@intel.com
This reverts commit bbdf0b2ff3 ("drm/i915/bxt: Disable device ready
before shutdown command").
Disable device ready before shutdown command was added previously to
avoid a split screen issue seen on dual link DSI panels. As of now, dual
link is not supported and will need some rework in the upstream
code. For single link DSI panels, the change is not required. This will
cause failure in sending SHUTDOWN packet during disable. Hence reverting
the change. Will handle the change as part of dual link enabling in
upstream.
Fixes: bbdf0b2ff3 ("drm/i915/bxt: Disable device ready before shutdown command")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504604671-17237-1-git-send-email-vidya.srinivas@intel.com
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle
drm_modeset_backoff which can now fail by returning the error.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912133749.6532-6-maarten.lankhorst@linux.intel.com
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle
drm_modeset_backoff which can now fail by returning the error.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912133749.6532-5-maarten.lankhorst@linux.intel.com
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle
drm_modeset_backoff which can now fail by returning the error.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912133749.6532-4-maarten.lankhorst@linux.intel.com
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and
handle drm_modeset_backoff which can now fail by returning the error.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912133749.6532-3-maarten.lankhorst@linux.intel.com
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
When we want to make drm_atomic_commit interruptible, there are a lot of
places that call the lock function, which we don't have control over.
Rather than trying to convert every single one, it's easier to toggle
interruptible waiting per acquire_ctx. If drm_modeset_acquire_init is
called with DRM_MODESET_ACQUIRE_INTERRUPTIBLE, then we will perform
interruptible waits in drm_modeset_lock and drm_modeset_backoff.
Changes since v1:
- Fix locking example in drm_modeset_lock.c to be compatible
with interruptible waiting (xexaxo) and make it default.
Uninterruptible waiting shouldn't happen except in corner cases,
but the example will still apply if the flag is removed.
- Add drm_modeset_lock_single_interruptible() to documentation.
- Fix dead link to removed drm_modeset_lock_interruptible() in
drm_modeset_lock().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v1
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912133749.6532-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This reverts commit 10e709cb29.
The patch doesn't work at all:
1. The CS can still be blocked because of amdgpu_ctx_add_fence().
2. The order of submission isn't correct any more.
3. We could end up using freed up memory because we now drop the
ctx reference to early.
This needs to be fixed cleanly by doing the context handling after the BO
handling, but this is a larger task just avoid the obvious crashes for now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu monk.liu@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Following the simplification to a single lookup loop in commit
170fa29b14 ("drm/i915: Simplify eb_lookup_vmas()") and commit
d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr"), we can go
one step further and reorder the error paths so that the state of the
local variable obj is always known to the compiler and doesn't need the
uninitialized_var markup to squelch a compiler warning.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912150752.20411-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
call to memset to assign 0 value immediately after allocating
memory with kzalloc is unnecesaary as kzalloc allocates the memory
filled with 0 value.
Semantic patch used to resolve this issue:
@@
expression e,e2; constant c;
statement S;
@@
e = kzalloc(e2, c);
if(e == NULL) S
- memset(e, 0, e2);
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace and cleanup lengthy phm_cap_enabled() sequences
with PP_CAP.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To replace common lengthy sequence that would create
really long lines all over.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start using new CGS bitmask macros.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All users of a VM must always wait for updates with always
valid BOs to be completed.
v2: remove debugging leftovers, rename struct member
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- v2: share code with CHIP_VEGA10 case
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, the ring will fail to create on next resume.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- v2: reuse the ring stop api in ring destory
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- fw_size in psp_v10_0_prep_cmd_buf is wrongly set as 0
- fixed the wrong calculation of psp_write_ptr_reg in psp_v10_0_cmd_submit
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just some cleanup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just some cleanup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is quite controversial because it adds another lock which is held during
page table updates, but I don't see much other option.
v2: allow multiple updates to be in flight at the same time
v3: simplify the patch, take the read side only once
v4: correctly fix rebase conflict
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the VM instead of the BO list to find the BO for a virtual address.
This fixes UVD/VCE in physical mode with VM local BOs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we need to find the mapping we need sysvm access anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With shared reservation objects it is possible that we want to temporary
kmap an BO while it is still on the swap list.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead take the callback lock during the final parts of CS.
This should solve the last remaining locking order problems with BO reservations.
v2: rebase, make dummy functions static inline
v3: add one more missing inline and comments
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow at least some parallel processing.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of moving them in the MMU notifier move them during CS.
v2: still mark pages as accessed/dirty
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead use a counter to figure out if we need to set new pages or not.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This didn't helped as intended, just simplify the code.
v2: unlock mmap_sem in the error path as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_vm_frag_ptes calls amdgpu_vm_update_ptes and the pt
has a shadow PT we mirror all the write to the shadow PT too, which
results in twice the commands.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With shared reservation objects __ttm_bo_reserve() can easily fail even on
destroyed BOs. This prevents correct handling when we need to individualize
the reservation object.
Fix this by individualizing the object before even trying to reserve it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 10e709cb29.
The patch doesn't work at all:
1. The CS can still be blocked because of amdgpu_ctx_add_fence().
2. The order of submission isn't correct any more.
3. We could end up using freed up memory because we now drop the
ctx reference to early.
This needs to be fixed cleanly by doing the context handling after the BO
handling, but this is a larger task just avoid the obvious crashes for now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu monk.liu@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We now pass a pointer to a pointer which seems to be
what they meant in the first place. The previous version
was modifying a pointer passed by value.
Fixes bug that was introduced by
commit 332798d40c2e91:drm/amd/powerplay: delete eventmgr layer in poweprlay
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-By: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move calling put_page into the unpopulate callback. Otherwise we mess up the pages
reference count when it is unbound multiple times.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed kbuild errors when IOMMU/SWIOTLB are disabled.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
first is incorrect if hit NULL/signaled fence
Signed-off-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This feature is for UMD to run benchmark in a
power state that is as steady as possible. kmd
need to fix the power state as stable as possible.
now, kmd support four level:
profile_standard,peak,min_sclk,min_mclk
move common related code to amd_powerplay.c
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SDE interrupt bits 25, 26 and 27 are either reserved or meant for
DDI E hotplug in SPT+. These bits are meant for AUX channels only in LPT
and CPT, so add the appropriate checks.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170909004255.14827-1-dhinakaran.pandiyan@intel.com
Factor out setup_private_pat() for introducing the following patches.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505202148-22959-1-git-send-email-zhi.a.wang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Min brightness value from vbt was missing for BXT platform.
This setting have to refer backlight ic spec to restrict
min backlight output. Without this restriction, driver would
allow to configure lower brightness value and violate
backlight ic requirement.
Fixes: 0fb890c013 ("drm/i915/bxt: BLC implementation")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Gary C Wang <gary.c.wang@intel.com>
Signed-off-by: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505187390-7039-1-git-send-email-shawn.c.lee@intel.com
During IGT testing it has been shown that the specification
defined polling time of 1 us for FCLK_DONE, is sometimes not
enough. The issue is still reproducible while disabling
C-states through the PM QoS framework and also while disabling
preemtion. From this the most plausible explanation is that the
issue is due to a firmware flaw.
As a workaround, it is better to wait a little bit longer for
the FCLK_DONE to come around, than to leave with an DRM_ERROR
and having FCLK_DONE at a randome time after.
While spinning a list of igt tests prone to reproduce the issue
the FCLK_DONE poll failed at approximately 2% of the invocations
of the bdw_set_cdclk function. The longest poll time during this
testing was measured to ~7us. So, the suggested new poll time of
100us is on the safe side.
v2: Added more documentation about investigations done.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102243
Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908132829.6312-1-marta.lofstedt@intel.com
Continue on VLV PSR split with vfunc, let's also create one
for enabling source.
Also since we are touching *_enable_source functions let's
fix a comment with wrong name for vlv's one.
v2: Fix typo on commit message (DK).
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-12-rodrigo.vivi@intel.com
Continue on VLV PSR split with vfunc, let's also create
one for setting up VSC.
v2: Rebased on top of commit d2419ffc10 ("drm/i915: Plumb
crtc_state to PSR enable/disable")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-10-rodrigo.vivi@intel.com
Let's move the activation calls together after enable is done.
No real functional change should be expected here. Just an attempt
to get it clear when we are really activating PSR after enabling it.
v2: Add braces on if/else because commit message there is too long
as suggested by Jani.
v3: Rebased on top of commit d2419ffc10 ("drm/i915: Plumb
crtc_state to PSR enable/disable")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-9-rodrigo.vivi@intel.com
No functional change is expected here since at this point
PSR is not allowed to go to any active state. In other
words, not really enabled.
However let's do in a separated patch so it gets clear
on what is change and specially it can helps on bisect
case if we figure something has caused changes in behaviour.
But this needs to be done before we make the vfunc to
enable source to be in parity with VLV implementation.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-8-rodrigo.vivi@intel.com
This sequence is part of enable source anyways, but they
only need to be executed once and not on every activation,
So let's re-create hsw_enable_source.
v2: Avoid changing order here to avoid changing behaviour
as suggested by Jani.
v3: Rebased on top of commit d2419ffc10 ("drm/i915: Plumb
crtc_state to PSR enable/disable")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-7-rodrigo.vivi@intel.com
VSC package is decided per eDP spec for psr1 or psr2,
and not per platform, so let's unify it and kill "skl"
func.
v2: Rebased on top of commit d2419ffc10 ("drm/i915: Plumb
crtc_state to PSR enable/disable")
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-6-rodrigo.vivi@intel.com
On HSW+ the real activate of PSR is decided by the source
after certain amount of configured idle frames.
However for the driver perspective where we track psr.active
variable this function here is the actual activate one. So
let's rename it before moving to vfunc with that.
v2: Fix typo on commit message (DK).
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-4-rodrigo.vivi@intel.com
VLV/CHV has a total different PSR implementation than the
other platforms, so let's start moving that to vfuncs.
Let's start with disable_src one.
v2: Rebased on top of commit d2419ffc10 ("drm/i915: Plumb
crtc_state to PSR enable/disable")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-3-rodrigo.vivi@intel.com
We really don't want to setup vfuncs and lock mutexes on
platforms that has no support to PSR.
Also we know what platforms they are so let's do it quietly.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230041.22978-2-rodrigo.vivi@intel.com
This makes use of the drm_simple_display_pipe_attach_bridge()
call and removes the two calls removing the bridge, which were
erroneous: they unregister the bridge which is not what
we want, we just want to unreference it and that is already
handled by the core.
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170910220801.28588-1-linus.walleij@linaro.org
The POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions allow
the source to reqest any node in a mst path or a whole path to be
powered down or up. This allows drivers to target a specific sink in the
MST topology, an improvement over just power managing the imediate
downstream device. Secondly, since the request-reply protocol waits for an
ACK, we can be sure that a downstream sink has enough time to respond to a
power up/down request.
v2: Fix memory leak (Lyude)
Cc: Lyude <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907001458.9399-1-dhinakaran.pandiyan@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Make __drm_object_property_get_value() static to fix the following
sparse warning:
drm_mode_object.c:250:5: warning: symbol '__drm_object_property_get_value' was not declared. Should it be static?
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 4a97a3da42 ("drm: Don't update property values for atomic drivers")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901165328.24459-4-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
drm_get_link_status_name() isn't used so kill it.
Fixes the following sparse warning:
drm_connector.c:618:1: warning: symbol 'drm_get_link_status_name' was not declared. Should it be static?
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: 40ee6fbef7 ("drm: Add a new connector atomic property for link status")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901165328.24459-3-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
Fix the following sparse warnings by making functions static:
drm_syncobj.c:420:5: warning: symbol 'drm_syncobj_import_sync_file_fence' was not declared. Should it be static?
drm_syncobj.c:441:5: warning: symbol 'drm_syncobj_export_sync_file' was not declared. Should it be static?
Cc: Dave Airlie <airlied@redhat.com>
Fixes: 3ee45a3b53 ("drm/syncobj: add sync_file interaction. (v1.2)")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901165328.24459-1-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
The ARM reference designs in the Versatile family: Integrator,
Versatile and RealView can make use of the new DRM driver as well.
We just need to create a bit of platform-specific code for them
that we isolate to its own file.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908124709.4758-7-linus.walleij@linaro.org
The old codebase has a delay between enabling and powering up the
PL11x.
According to the manual for PL110, ARM DDI 0161E page 1-5 and
the PL111 manual ARM DDI 0293C page 1-6, the power sequence should
be such that once Vdd is stable (which we assume it is at boot)
LCDEN is enabled first and then CLPOWER should be enabled
"after the signals have stabilized" and this is said to
be display-dependent. The old codebase uses 20ms.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908124709.4758-5-linus.walleij@linaro.org
We detect and enable the use of the PL110 variant, an earlier
incarnation of PL111. The only real difference is that the
control and interrupt enable registers have swapped place.
The Versatile AB and Versatile PB have a variant inbetween
PL110 and PL111, it is PL110 but they have already swapped the
two registers so those two need a bit of special handling.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908124709.4758-4-linus.walleij@linaro.org
This replaces the custom connector in the PL111 with the
panel bridge helper.
This works nicely for all standard panels, but since there
are several PL11x-based systems that will need to use the dumb
VGA connector bridge we use drm_of_find_panel_or_bridge()
and make some headroom for dealing with bridges that are
not panels as well, and drop a TODO in the code.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908124709.4758-3-linus.walleij@linaro.org
Pull i2c updates from Wolfram Sang:
- new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS
- quite some driver updates
- cleanups for the i2c-mux subsystem
- some subsystem-wide constification
- further cleanup of include/linux/i2c
* 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
i2c: sprd: Fix undefined reference errors
i2c: nomadik: constify amba_id
i2c: versatile: Make i2c_algo_bit_data const
i2c: busses: make i2c_adapter_quirks const
i2c: busses: make i2c_adapter const
i2c: busses: make i2c_algorithm const
i2c: Add Spreadtrum I2C controller driver
dt-bindings: i2c: Add Spreadtrum I2C controller documentation
i2c-cht-wc: make cht_wc_i2c_adap_driver static
MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c
i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones
i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
MAINTAINERS: drop entry for Blackfin I2C and Sonic's email
blackfin: merge the two TWI header files
i2c: davinci: Preserve return value of devm_clk_get
i2c: mediatek: Add i2c compatible for MediaTek MT7622
dt-bindings: i2c: Add MediaTek MT7622 i2c binding
dt-bindings: i2c: modify information formats
i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support
...
If we want to have vblank on both pipelines at the same time, we need
to call drm_vblank_init with num_crtcs = 2.
Instead, since the crtc init calls correctly set mode_config.num_crtc,
we can move the drm_vblank_init call to after the crtc init code is
called, which is the component bind part. Then we can just pass
mode_config.num_crtc in.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-8-wens@csie.org
The TCON has a mux to select the source of the data to display.
This mux includes selecting the display backends. On the A31,
which has two display pipelines, this mux can let the TCON
select either backend as its data source. Although the muxing
can be changed on the fly, DRM needs to be able to group a
bunch of layers such that they get switched to another crtc
together. This is because the display backend does the layer
compositing, while the TCON generates the display timings.
This constraint is not supported by DRM.
Here we simply pair up backends and TCONs with the same ID.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-7-wens@csie.org
Now that sun4i_tcon_find_engine_traverse() usage is restricted to the
single input case, we can remove the for_each_available_child_of_node
loop.
While at it, consolidate all the of_node_put calls into a common exit
path.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-6-wens@csie.org
The device tree binding for sun4i-drm says:
For all connections between components up to the TCONs in the display
pipeline, when there are multiple components of the same type at the
same depth, the local endpoint ID must be the same as the remote
component's index. For example, if the remote endpoint is Frontend 1,
then the local endpoint ID must be 1.
We should be able to get the TCON's ID directly from any of the remote
endpoints from its input port. With the ID, we can then go through the
list of registered engines and find a matching one by ID.
However the A31 device tree is incorrect. We assumed that there were no
cross pipeline connections between the backends and TCONs. As a result,
in all the endpoints between the backends and TCONs of the second
display pipeline, the endpoint IDs were incorrectly set to 0, when in
fact they should've been set to 1.
To maintain compatibility with this incorrect device tree, we first
check if the TCON's input port has 1 or many endpoints. If there are
more than 1, then it is likely a fixed version, and we can proceed
with the new method. If there is only 1 endpoint, then it is possibly
an incorrect version, or it could be the SoC only has one pipeline.
In either case we fall back to using the old method of traversing
the input connections to find a matching engine, and then get its
ID.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-5-wens@csie.org
The patch b317fa3ba1 ("drm/sun4i: tcon: Find matching display backend
by device node matching") assumed a one-to-one mapping between TCONs
and backends. This turned out wrong, as we found muxing controls in the
TCON of the A31, and undocumented usage of the backend output selector
of the A20.
Make sun4i_tcon_find_engine() bail out if the current node has multiple
input connections.
Fixes: b317fa3ba1 ("drm/sun4i: tcon: Find matching display backend
by device node matching")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-4-wens@csie.org
The encoder drivers use drm_of_find_possible_crtcs to get upstream
crtcs from the device tree using of_graph. For the results to be
correct, encoders must be probed/bound after _all_ crtcs have been
created. The existing code uses a depth first recursive traversal
of the of_graph, which means the encoders downstream of the TCON
get add right after the first TCON. The second TCON or CRTC will
never be properly associated with encoders connected to it.
Other platforms, such as Rockchip, deal with this by probing all
CRTCs first, then all subsequent components. This is easy to do
since the CRTCs correspond to just one device node, and are the
first nodes in the pipeline.
However with Allwinner SoCs, the function of the CRTC is split
between the display backend (DE 1.0) or mixer (DE 2.0), which does
scan-out and compositing, and the TCON, which generates the display
timing signals. Further complicating the process, there may be a
Dynamic Range Controller between the backend and the TCON. Also, the
backend is preceded by the frontend, with a Display Enhancement Unit
possibly in between.
In a dual display pipeline setup, both frontends can feed either
backend, and both backends can feed either TCON. We want all
components of the same type to be added before the next type in the
pipeline. Fortunately, the pipelines are perfectly symmetric, i.e.
components of the same type are at the same depth when counted from
the frontend. The only exception is the third pipeline in the A80
SoC, which we do not support anyway.
Hence we can use a breadth first search traversal order to add
components. We do not need to check for duplicates. The component
matching system handles this for us.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-3-wens@csie.org
If we know that we will completely fill a pagetable (i.e. we are
inserting a complete set of 512 pages), we can skip prefilling that PT
with scratch entries. If we have to abort the insertion prior to writing
the real entries, we will teardown the pagetable and remove it from the
page directory (so that we will restart the allocation next time).
We could do similar tricks for the PD and PDP, but the likelihood of a
single insertion covering the entire 512 entries diminishes, as do the
cycle savings. The saving are even greater (relatively) when we are
preallocating page tables for huge pages, as then we never need to fill
the page table.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908181622.17791-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Allow interval trees to quickly check for overlaps to avoid unnecesary
tree lookups in interval_tree_iter_first().
As of this patch, all interval tree flavors will require using a
'rb_root_cached' such that we can have the leftmost node easily
available. While most users will make use of this feature, those with
special functions (in addition to the generic insert, delete, search
calls) will avoid using the cached option as they can do funky things
with insertions -- for example, vma_interval_tree_insert_after().
[jglisse@redhat.com: fix deadlock from typo vm_lock_anon_vma()]
Link: http://lkml.kernel.org/r/20170808225719.20723-1-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20170719014603.19029-12-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Doug Ledford <dledford@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When binding the TCON, we were checking the reset control status and
asserting reset if it wasn't in reset. The check failed to account for
the reset control API returning error codes if the status callback was
not implemented.
Since we want the TCON to be reset in all cases, use reset_control_reset
to force a reset instead.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908090016.32224-1-wens@csie.org
Macro params shall be wrapped into () to avoid unexpected results.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908161130.22424-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Gen7 won't get any new engines, and we already added VCS2 there to just
silence gcc's not handled in switch warnings.
Use a default case instead, otherwise we will need to keep adding extra
cases if changes happen in the future.
v2: Since reaching the default case is impossible, use GEM_BUG_ON (Chris).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830180115.907-1-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The current error handling when devm_kzalloc fails performs a
non-null check on connector which is redundant because connector
is null at that failure point. Once this is removed, make the
failure path into a trivial -ENOMEM return to clean up the
error handling. Also remove need to initialize connector to NULL.
Detected by CoverityScan CID#1339527 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908140504.1340-1-colin.king@canonical.com
By always keeping track of the last commit in plane_state, we know
whether there is an active update on the plane or not. With that
information we can reject the fast update, and force the slowpath
to be used as was originally intended.
We cannot use plane_state->crtc->state here, because this only mentions
the most recent commit for the crtc, but not the planes that were part
of it. We specifically care about what the last commit involving this
plane is, which can only be tracked with a pointer in the plane state.
Changes since v1:
- Clean up the whole function here, instead of partially earlier.
- Add mention in the commit message why we need commit in plane_state.
- Swap plane->state in intel_legacy_cursor_update, instead of
reassigning all variables. With this commit We know that the cursor
is not part of any active commits so this hack can be removed.
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20170904104838.23822-7-maarten.lankhorst@linux.intel.com
[mlankhorst: Amend commit for merge conflicts with drm-intel]
Currently we neatly track the crtc state, but forget to look at
plane/connector state.
When doing a nonblocking modeset, immediately followed by a setprop
before the modeset completes, the setprop will see the modesets new
state as the old state and free it.
This has to be solved by waiting for hw_done on the connector, even
if it's not assigned to a crtc. When a connector is unbound we take
the last crtc commit, and when it stays unbound we create a new
fake crtc commit for that gets signaled on hw_done for all the
planes/connectors.
We wait for it the same way as we do for crtc's, which will make
sure we never run into a use-after-free situation.
Changes since v1:
- Only create a single disable commit. (danvet)
- Fix leak in intel_legacy_cursor_update.
Changes since v2:
- Make reference counting in drm_atomic_helper_setup_commit
more obvious. (pinchartl)
- Call cleanup_done for fake commit. (danvet)
- Add comments to drm_atomic_helper_setup_commit. (danvet, pinchartl)
- Add comment to drm_atomic_helper_swap_state. (pinchartl)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: kms_atomic_transition.plane-use-after-nonblocking-unbind*
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170904104838.23822-6-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When commit synchronization through drm_crtc_commit was first
introduced, we tried to solve the problem of the flip_done
needing a reference count by blocking in cleanup_done.
This has been changed by commit 24835e442f ("drm: reference count
event->completion") which made the waits here no longer needed.
However, even after this commit we still needed the wait because
otherwise we cannot wait for the flip_done because this item might
have been removed from the list.
Changed since v1:
- Make mention of cleanup_done completing before flip_done.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170904104838.23822-4-maarten.lankhorst@linux.intel.com
Most code only cares about the current commit or previous commit.
Fortuantely we already have a place to track those. Move it to
drm_crtc_state where it belongs. :)
The per-crtc commit_list is kept for places where we have to look
deeper than the current or previous commit for checking whether to stall
on unpin. This is used in drm_atomic_helper_setup_commit and
intel_has_pending_fb_unpin.
Changes since v1:
- Update kerneldoc for drm_crtc.commit_list. (danvet)
Changes since v2:
- Remove drm_atomic_helper_async_check hunk. (pinchartl)
Changes since v3:
- Fix use-after-free in drm_atomic_helper_commit_cleanup_done().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170904150456.31049-1-maarten.lankhorst@linux.intel.com
[mlankhorst: preceeding -> preceding (checkpatch)]
The next commit removes the wait for flip_done in in
drm_atomic_helper_commit_cleanup_done, but we need it for the tests
to pass. Instead of using complicated vblank tracking which ends
up being ignored anyway, call the correct atomic helper. :)
Changes since v1:
- Always call drm_atomic_helper_wait_for_flip_done,
even for legacy cursor updates. (danvet)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170904104838.23822-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
gcc-7 complains about multiplying within a condition being
suspicious:
drivers/gpu/drm/stm/dw_mipi_dsi-stm.c: In function 'dsi_pll_get_clkout_khz':
drivers/gpu/drm/stm/dw_mipi_dsi-stm.c:117:10: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
The code here is correct, but can be easily rephrased to make
that more obvious. I also swap out the error handling and the normal
code path for clarity.
Fixes: b0f09a3c69d9 ("drm/stm: Add STM32 DSI controller driver")
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906131331.2691300-1-arnd@arndb.de
This adds support for Rockchip soc lvds found on rk3288
Based on the patches from Mark yao and Heiko Stuebner.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1504351737-136042-1-git-send-email-hjc@rock-chips.com
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Looking at our virtual PCI device, we can see surprising Region 4 and Region 5.
00:10.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller])
....
Region 0: Memory at 140000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 180000000 (64-bit, prefetchable) [size=1G]
Region 4: Memory at <ignored> (32-bit, non-prefetchable)
Region 5: Memory at <ignored> (32-bit, non-prefetchable)
Expansion ROM at febd6000 [disabled] [size=2K]
The fact is that we only implemented BAR0 and BAR2. Surprising Region 4 and
Region 5 are shown because we report their size as 0xffffffff. They should
report size 0 instead.
BTW, the physical GPU has a PIO BAR. GVTg hasn't implemented PIO access, so
we ignored this BAR for vGPU device.
v2: fix BAR size value calculation.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
fix the wrong return type and return error once the unknown
command is scanned.
v2:
- separate this error handle from healthy rating code. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When an error occurs in dispatch_workload, this patch is to do the
proper cleanup and rollback to the original states before the workload
is abandoned.
v2:
- split the mixed several error paths for better review. (Zhenyu)
v3:
- original PTR_ERR(cs) is good and code cleanup. (Zhenyu)
v4:
- reuse the existing i915_add_request for error handling. (Zhenyu)
v5:
- remove the duplicate error handling release_shadow_wa_ctx and
move the engine->context_unpin upper. (Zhenyu)
v6:
- keep the old label "out". (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When it is failed in shadow_mm, the pin_count should rollback
to the original states before return.
v2:
- split the mixed several error paths for better review. (Zhenyu)
v3:
increase the pincount after shadow success. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
refine the error handling for prepare_execlist_workload to restore to the
original states once error occurs.
only release the shadowed batch buffer and wa ctx when the workload is
completed successfully.
v2:
- split the mixed several error paths for better review. (Zhenyu)
v3:
- handle prepare batch buffer/wa ctx pin errors and
- emulate_schedule_in null issue. (Zhenyu)
v4:
- no need to handle emulate_schedule_in null issue. (Zhenyu)
v5:
- release the shadowed batch buffer and wa ctx only for the
successful workload. (Zhenyu)
v6:
- polish the return style. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When an error occurs after shadow_indirect_ctx, this patch is to do the
proper cleanup and rollback to the original states for shadowed indirect
context before the workload is abandoned.
v2:
- split the mixed several error paths for better review. (Zhenyu)
v3:
- no return check for clean up functions. (Changbin)
v4:
- expose and reuse the existing release_shadow_wa_ctx. (Zhenyu)
v5:
- move the release function to scheduler.c file. (Zhenyu)
v6:
- move error handling code of intel_gvt_scan_and_shadow_workload
to here. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Currently i915 request structure and shadow ring buffer are allocated
before command scan, so it will have to restore to previous states once
any error happens afterwards in the long dispatch_workload path.
This patch is to introduce a reserved ring buffer created at the beginning
of vGPU initialization. Workload will be coped to this reserved buffer and
be scanned first, the i915 request and shadow ring buffer are only
allocated after the result of scan is successful.
To balance the memory usage and buffer alloc time, the coming bigger ring
buffer will be reallocated and kept until more bigger buffer is coming.
v2:
- use kmalloc for the smaller ring buffer, realloc if required. (Zhenyu)
v3:
- remove the dynamically allocated ring buffer. (Zhenyu)
v4:
- code style polish.
- kfree previous allocated buffer once kmalloc failed. (Zhenyu)
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
For vfio-pci, if the region support MMAP then it should support both
mmap and normal file access. The user-space is free to choose which is
being used. For qemu, we just need add 'x-no-mmap=on' for vfio-pci
option.
Currently GVTg only support MMAP for BAR2. So GVTg will not work when
user turn on x-no-mmap option.
This patch added file style access for BAR2, aka the GPU aperture. We
map the entire aperture partition of active vGPU to kernel space when
guest driver try to enable PCI Memory Space. Then we redirect the file
RW operation from kvmgt to this mapped area.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
For PCI, 64bit bar consumes two BAR registers, but this doesn't mean
both of two BAR are valid. Actually the second BAR is regarded as
reserved in this case. So we shouldn't emulate the second BAR.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
that are entirely function pointers (along with a couple designated
initializer fixes).
- For the structleak plugin, provide an option to perform zeroing
initialization of all otherwise uninitialized stack variables that are
passed by reference (Ard Biesheuvel).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=3jxS
-----END PGP SIGNATURE-----
Merge tag 'gcc-plugins-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull gcc plugins update from Kees Cook:
"This finishes the porting work on randstruct, and introduces a new
option to structleak, both noted below:
- For the randstruct plugin, enable automatic randomization of
structures that are entirely function pointers (along with a couple
designated initializer fixes).
- For the structleak plugin, provide an option to perform zeroing
initialization of all otherwise uninitialized stack variables that
are passed by reference (Ard Biesheuvel)"
* tag 'gcc-plugins-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: structleak: add option to init all vars used as byref args
randstruct: Enable function pointer struct detection
drivers/net/wan/z85230.c: Use designated initializers
drm/amd/powerplay: rv: Use designated initializers
Pull i916 drm fixes from Rodrigo Vivi:
"Since Dave is on paternity leave we are sending drm/i915 fixes for
v4.14-rc1 directly to you as he had asked us to do.
The most critical ones are the GPU reset fix for gen2-4 and GVT fix
for a regression that is blocking gvt init to work on your tree.
The rest is general fixes for patches coming from drm-next"
Acked-by: Dave Airlie <airlied@redhat.com>
* tag 'drm-intel-next-fixes-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Re-enable GTT following a device reset
drm/i915: Annotate user relocs with __user
drm/i915: Silence sparse by using gfp_t
drm/i915: Add __rcu to radix tree slot pointer
drm/i915: Fix the missing PPAT cache attributes on CNL
drm/i915/gvt: Remove one duplicated MMIO
drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoder
drm/i915: Make i2c lock ops static
drm/i915: Make i9xx_load_ycbcr_conversion_matrix() static
drm/i915/edp: Increase T12 panel delay to 900 ms to fix DP AUX CH timeouts
drm/i915: Ignore duplicate VMA stored within the per-object handle LUT
drm/i915: Skip fence alignemnt check for the CCS plane
drm/i915: Treat fb->offsets[] as a raw byte offset instead of a linear offset
drm/i915: Always wake the device to flush the GTT
drm/i915: Recreate vmapping even when the object is pinned
drm/i915: Quietly cancel FBC activation if CRTC is turned off before worker
FF_SLICE_CS_CHICKEN2 does not belong to the context image.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-6-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
GAMT_CHKN_BIT_REG does not live in the context image.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-5-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
GEN7_UCGCTL4 does not live in the context.
v2: Missing parenthesis
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-4-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
So do it correctly.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-3-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
GAMT_CHKN_BIT_REG does not live in the context.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-2-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Afaict, GEN9_GAMT_ECO_REG_RW_IA does not live in the context, so writing
it on every context creation is overkill (and wrong).
v2: Missing end parenthesis
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504798809-5653-1-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We also see the delayed GTT write issue on i915g/i915gm, so let's
presume that it is a universal problem for all !llc machines, and that we
just haven't yet noticed on g33, gen4 and gen5 machines.
v2: Use a register that exists on all platforms
Testcase: igt/gem_mmap_gtt/coherency # i915gm
References: https://bugs.freedesktop.org/show_bug.cgi?id=102577
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907184520.5032-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä