The 104-QUAD-8 only has two count modes where a ceiling value makes
sense: Range Limit and Modulo-N. Outside of these two modes, setting a
ceiling value is an invalid operation -- so let's report it as such by
returning -EINVAL.
Fixes: fc06926226 ("counter: 104-quad-8: Add lock guards - generic interface")
Acked-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/a2147f022829b66839a1db5530a7fada47856847.1627990337.git.vilhelm.gray@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
BMC156 is another accelerometer that works just fine with the bmc150-accel
driver. It's very similar to BMC150 (also a accelerometer + magnetometer
combo) but with only one accelerometer interrupt pin. It would make sense
if only INT1 was exposed but someone at Bosch decided to only have an
INT2 pin.
Try to deal with this by making use of the INT2 support introduced
in the previous commit and force using INT2 for BMC156. To detect
that we need to bring up a simplified version of the previous type IDs.
Note that unlike the type IDs removed in commit c06a6aba68
("iio: accel: bmc150: Drop misleading/duplicate chip identifiers")
here I only add one for the special case of BMC156. Everything else
still happens by reading the CHIP_ID register since the chip type
information often is not accurate in ACPI tables.
Tested-by: Nikita Travkin <nikita@trvn.ru> # BMC156
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210802155657.102766-5-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some Bosch accelerometers have two interrupt pins (INT1 and INT2).
At the moment, the driver uses only the first one, which is fine for
most situations. However, some boards might only have INT2 connected
for some reason.
Add the necessary bits and configuration to set up INT2. Then try
to detect this situation at least for device tree setups by checking
if the first interrupt (the one picked by the I2C/SPI core) is actually
named "INT2" using the interrupt-names property.
of_irq_get_byname() returns either 0 or some error code in case
the driver probed without device tree, so in all other cases we fall
back to configuring INT1 as before.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210802155657.102766-4-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
BMC156 is very smilar to BMC150, but it has only one accelerometer
interrupt pin. It would make sense if only INT1 was exposed but someone
at Bosch decided to only have an INT2 pin.
In this case, it does not make sense if the first interrupt pin is
treated as INT1 (since that pin does not exist). Add a note to the
bindings that the first interrupt pin is treated as INT2 for BMC156.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210802155657.102766-3-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The binding already allows specifying both interrupt pins, but there
is currently no way to describe a board where (for whatever reason)
only INT2 is connected. Make it possible to use "interrupt-names"
to make it explicit which interrupt pin is meant in the interrupts.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210802155657.102766-2-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add an of_device_id table to explicitly support the Capella cm3323
Ambient Light Sensor rather than relying on matching against the
i2c_device_id table.
Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
Link: https://lore.kernel.org/r/20210728110048.14593-2-siddharth.manthan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sgp40 is a gas sensor used for measuring the air quality.
This driver is reading the raw resistance value which can be passed to
an userspace algorithm for further calculation.
The raw value is also used to calculate an estimated absolute voc index
in the range from 0 to 500. For this purpose the raw_mean value of the
resistance for which the index value is 250 might be set up as a
calibration step. This can be done with in_resistance_calibbias.
Compensation of relative humidity and temperature is supported and can
be used by writing to output values of out_humidityrelative_raw and
out_temp_raw.
There is a predecesor sensor type (sgp30) already existing. This driver
module was not extended because the new sensor is quite different in its
i2c telegrams.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210804154641.GA3237@arbad
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add devicetree binding for Sensirion sgp40 gas sensor to trivial
devices.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Link: https://lore.kernel.org/r/20210804154549.GA3223@arbad
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared ep93xx-adc
CPU: 0 PID: 1 Comm: swapper Not tainted 5.13.0-rc5-... #1
Hardware name: Cirrus Logic EDB9302 Evaluation Board
[<c000d5b0>] (unwind_backtrace) from [<c000c590>] (show_stack+0x10/0x18)
[<c000c590>] (show_stack) from [<c03a5f38>] (dump_stack+0x20/0x2c)
[<c03a5f38>] (dump_stack) from [<c03a2098>] (__warn+0x98/0xc0)
[<c03a2098>] (__warn) from [<c03a2150>] (warn_slowpath_fmt+0x90/0xc0)
[<c03a2150>] (warn_slowpath_fmt) from [<c01d8358>] (clk_core_enable+0x9c/0xbc)
[<c01d8358>] (clk_core_enable) from [<c01d8698>] (clk_core_enable_lock+0x18/0x30)
[<c01d8698>] (clk_core_enable_lock) from [<c0266560>] (ep93xx_adc_probe+0xe4/0x1a0)
[<c0266560>] (ep93xx_adc_probe) from [<c02126e0>] (platform_probe+0x34/0x80)
[<c02126e0>] (platform_probe) from [<c0210bf8>] (really_probe+0xe8/0x394)
[<c0210bf8>] (really_probe) from [<c0211464>] (device_driver_attach+0x5c/0x64)
[<c0211464>] (device_driver_attach) from [<c02114e8>] (__driver_attach+0x7c/0xec)
[<c02114e8>] (__driver_attach) from [<c020f1b4>] (bus_for_each_dev+0x78/0xc4)
[<c020f1b4>] (bus_for_each_dev) from [<c0211570>] (driver_attach+0x18/0x24)
[<c0211570>] (driver_attach) from [<c020fab4>] (bus_add_driver+0x140/0x1cc)
[<c020fab4>] (bus_add_driver) from [<c0211c44>] (driver_register+0x74/0x114)
[<c0211c44>] (driver_register) from [<c02134f8>] (__platform_driver_register+0x18/0x24)
[<c02134f8>] (__platform_driver_register) from [<c0470148>] (ep93xx_adc_driver_init+0x10/0x1c)
[<c0470148>] (ep93xx_adc_driver_init) from [<c045ce88>] (do_one_initcall+0x7c/0x1a4)
[<c045ce88>] (do_one_initcall) from [<c045d184>] (kernel_init_freeable+0x17c/0x1fc)
[<c045d184>] (kernel_init_freeable) from [<c03a64d0>] (kernel_init+0x8/0xf8)
[<c03a64d0>] (kernel_init) from [<c00082d8>] (ret_from_fork+0x14/0x3c)
...
ep93xx-adc ep93xx-adc: Cannot enable clock
ep93xx-adc: probe of ep93xx-adc failed with error -108
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20210613233041.128961-2-alexander.sverdlin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For the function of platform_get_irq(), the example in platform.c is
* int irq = platform_get_irq(pdev, 0);
* if (irq < 0)
* return irq;
the return value of zero is unnecessary to check, so make the right
check and simplify code.
Note that platform_get_irq() is documented as never returning 0
so this is a minor optmization rather than a fix.
Co-developed-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20210802120929.33760-1-tangbin@cmss.chinamobile.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a device managed hook, via devm_add_action_or_reset() and
max5821_regulator_disable(), to disable voltage regulator on device
detach.
Replace iio_device_register() by devm_iio_device_register() and remove
the max5821_remove() function used to unregister the device and disable the
voltage regulator.
Remove i2c_set_clientdata() from the probe function, since
i2c_get_clientdata() is not used anymore.
Remove regulator_disable() calls from the probe function.
Signed-off-by: Théo Borém Fabris <theobf@usp.br>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210724220159.11998-1-theobf@usp.br
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add both the jz4760 and jz4760b, plus a property to use the internal
divider on the b variant and document it.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726082033.351533-6-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The JZ4760B variant differs slightly from the JZ4760: it has a bit called VBAT_SEL in the CFG register.
In order to correctly sample the battery voltage on existing handhelds using this SOC, the bit must be cleared.
We leave the possibility to set the bit, by using the "ingenic,use-internal-divider" in the devicetree.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Link: https://lore.kernel.org/r/20210726082033.351533-5-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The jz4760 sadc is very similar to the jz4770 one, but has a VREF of 2.5V
and 3 aux channels.
modify ingenic_adc_read_chan_info_raw() needs a change to account for it.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210726082033.351533-4-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The JZ4760(B) socs have 3 AUX inputs, add an entry to prepare including the one named AUX in the sadc driver.
Leaving the rest untouched as it's ABI.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726082033.351533-3-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The jz4760(b) socs have 3 aux channels.
The purpose of has_aux2 is to set the MD bits used to select
the AUX channel to be sampled, not to describe the hardware.
Rename it to a more appropriate name.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210726082033.351533-2-cbranchereau@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use device_property_read_... to support both device tree and ACPI
bindings.
Simplify the logic for reading "combined-sensors" array, as we assume
it has been vetted at firmware build time.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210728181757.187627-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Align the function arguments after a line-break with the opening
parenthesis on the previous line. No functional changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210717233718.332267-4-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a missing space between if and the opening parenthesis to make the
coding style consistent across the whole driver. No functional changes
intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210717233718.332267-3-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
G12A and newer don't use the SAR ADC to read the SoC temperature from
within the firmware. Instead there's now a dedicated thermal sensor.
Disable the BL30 integration for G12A and newer SoCs to save a few CPU
cycles when reading samples.
Adding a separate struct meson_sar_adc_data is a good idea anyways
because starting with G12A there's some extra registers to read the
samples in a simplified way.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210717233718.332267-2-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st_gyro_allocate_ring() function calls iio_triggered_buffer_setup() to
allocate a triggered buffer.
But the same can be done with devm_iio_triggered_buffer_setup() and then
the st_gyro_common_remove() no longer needs to manually deallocate it.
We know that the parent of the IIO device is used to manage other instances
of the devm unwind, so it can be used in the st_gyro_allocate_ring() as
well.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210720074642.223293-4-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st_magn_allocate_ring() function calls iio_triggered_buffer_setup() to
allocate a triggered buffer.
But the same can be done with devm_iio_triggered_buffer_setup() and then
the st_magn_common_remove() no longer needs to manually deallocate it.
We know that the parent of the IIO device is used to manage other instances
of the devm unwind, so it can be used in the st_magn_allocate_ring() as
well.
This change also removes some omitted st_magn_{probe,remove}_trigger()
inline hooks.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210720074642.223293-3-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st_accel_allocate_ring() function calls iio_triggered_buffer_setup() to
allocate a triggered buffer.
But the same can be done with devm_iio_triggered_buffer_setup() and then
the st_accel_common_remove() no longer needs to manually deallocate it.
We know that the parent of the IIO device is used to manage other instances
of the devm unwind, so it can be used in the st_accel_allocate_ring() as
well.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210720074642.223293-2-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st_press_allocate_ring() function calls iio_triggered_buffer_setup() to
allocate a triggered buffer.
But the same can be done with devm_iio_triggered_buffer_setup() and then
the st_press_common_remove() no longer needs to manually deallocate it.
We know that the parent of the IIO device is used to manage other instances
of the devm unwind, so it can be used in the st_press_allocate_ring() as
well.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210720074642.223293-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the defined variable "dev" to make the code cleaner.
Co-developed-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20210720125945.11548-1-tangbin@cmss.chinamobile.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove iio_claim/release and change it on mutex accordingly in
vcnl3020_write_proxy_samp_freq.
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210722154420.915082-4-i.mikhaylov@yadro.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the possibility to run proximity sensor in periodic measurement
mode with thresholds.
Reported-by: kernel test robot <lkp@intel.com> #repeated include
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210722154420.915082-3-i.mikhaylov@yadro.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st-sensors drivers have changed in structure over time, and includes
have not always kept up with this. Let's bring them back to nearer
the ideal.
Identified with the include-what-you-use tool and careful checking of
its suggestions.
Note I haven't been particularly aggressive here, so this is just the
cases where the include obviously isn't needed rather than the more
subtle corners.
Note I took the opportunity to add mod_devicetable.h as I generally
prefer to see that when acpi or of match tables are present.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210608175149.4019289-1-jic23@kernel.org
In Linux the bma180 and bmc150-accel driver cover fairly similar chips
from Bosch (just with minor register differences). For the DT schema,
this does not make any difference: They both represent I2C/SPI devices,
have one or two interrupts plus a vdd/vddio-supply.
This means there is no need to duplicate the schema, we can just
document the compatibles for both drivers in a single DT schema.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210614163150.7774-4-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Similar to recent rework in the bmc150-accel driver, sort the compatible
list in the DT schema so there is a consistent order.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210614163150.7774-3-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Bosch accelerometers similar to BMA255 are initially configured to
emit an active-high interrupt signal. This is currently not re-configured
in the bmc150-accel driver so the interrupt should most certainly be
IRQ_TYPE_EDGE_RISING (or potentially IRQ_TYPE_LEVEL_HIGH).
(Unless there is some kind of inverter installed on the board...)
At the moment the bmc150-accel driver forcefully requests the IRQ
using IRQF_TRIGGER_RISING, which means that the IRQ type is currently
ignored in all existing device trees.
Fixes: 6259551cf1 ("iio: accel: bmc150-accel: Add DT bindings")
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210614163150.7774-2-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The continue statement at the end of a for-loop has no effect,
remove it.
Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210617081312.151746-1-colin.king@canonical.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The point of this new change is to make the IIO tree actually parsable.
Before, given this attribute as a filename:
in_voltage0_aux_sample_rate
Userspace had no way to know if the attribute name was
"aux_sample_rate" with no extended name, or "sample_rate" with "aux" as
the extended name, or just "rate" with "aux_sample" as the extended
name.
This was somewhat possible to deduce when there was more than one
attribute present for a given channel, e.g:
in_voltage0_aux_sample_rate
in_voltage0_aux_frequency
There, it was possible to deduce that "aux" was the extended name. But
even with more than one attribute, this wasn't very robust, as two
attributes starting with the same prefix (e.g. "sample_rate" and
"sample_size") would result in the first part of the prefix being
interpreted as being part of the extended name.
To address the issue, knowing that channels will never have both a label
and an extended name, set the channel's label to the extended name.
In this case, the label's attribute will also have the extended name in
its filename, but we can live with that - userspace can open
in_voltage0_<prefix>_label and verify that it returns <prefix> to obtain
the extended name.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210618123005.49867-3-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extended names are a problem for user-space as they make the filenames
in sysfs sometimes not parsable. They are now deprecated in favor of
labels.
This change makes sure that a device driver won't provide both labels
and extended names for its channels. It has never been the case and we
don't want it to happen.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210618123005.49867-2-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add startup time for each chip familly. This allows a better behaviour of
the gyro and the accel. The gyro has now the time to stabilise itself
thus making initial data discarding for gyro irrelevant.
Signed-off-by: Baptiste Mansuy <bmansuy@invensense.com>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20210621085731.9212-1-bmansuy@invensense.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver has two parts, one for i2c and one for spi, since the chip can
operate with both wire protocols.
The core file has a common adxl345_core_remove() function which puts the
chip into a powerdown state. This can be implemented with a
devm_add_action_or_reset() hook.
Doing that means we can register the IIO device with
devm_iio_device_register() and get rid of the adxl345_core_remove()
function.
The dev_set_drvdata() call can be removed as there is no other user of this
private data anymore.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210624080441.8710-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change converts the driver to use only device-managed init routines in
the probe function of the driver.
This way, we no longer need the tcs3414_remove() hook.
We still need to keep the i2c_set_clientdata() call, as that's being used
for the PM routines.
And lastly, a devm_add_action_or_reset() hook is added to call the
powerdown handler when the chip is uninitialized or the probe fails.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210624080534.9209-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The change converts the probe function to use the
devm_iio_device_register() function.
Before calling that, we need to register an action to store the wiper back
to non-volatile memory when the device is de-registered.
We don't need to do this if the probe fails, because the only place where
the probe can fail now is devm_iio_device_register() and that shouldn't
create an IIO device (for userspace to poke at) if it fails.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210624080641.9953-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When the device is probed, there's no guarantee that the device is not in
power-down mode. This can happen if the driver is unregistered and
re-probed.
To make sure this doesn't happen, the value of the TMP006_CONFIG register
(which is read in the probe function and stored in the device's private
data) is being checked to see if the MOD bits have the correct value.
This is a fix for a somewhat-rare corner case. As it stands, this doesn't
look like a high priority to go into the Fixes route.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210624081924.15897-2-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change converts the driver to register via devm_iio_device_register().
For the tmp006_powerdown() hook, this uses a devm_add_action() hook to put
the device in powerdown mode when it's unregistered.
With these changes, the remove hook can be removed.
The i2c_set_clientdata() call is staying around as the private data is used
in the PM routines.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210624081924.15897-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The datasheet mentions that the suspend mode is toggled by reading the
suspend register. The reading returns value 0xFF if the system was in
suspend mode, otherwise it returns value 0x00.
The bma220_deinit() function does up to 2 reads, in case the device was in
suspend mode, which suggests a level of paranoia that makes the logic in
bma220_suspend() and bma220_resume() look insufficient.
This change implements a bma220_power() function which does up to 2 reads
of the suspend register to make sure that the chip enters a desired
(suspended or normal) mode.
If the transition fails, then -EBUSY is returned.
Since only a reference to SPI device is required, we can remove the
spi_set_drvdata() call and get the SPI device object from the base device
object in the suspend/resume routines.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210625140137.362282-2-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change converts the driver to use devm_iio_triggered_buffer_setup()
and devm_iio_device_register() for initializing and registering the IIO
device.
The bma220_deinit() is converted into a callback for a
devm_add_action_or_reset() hook, so that the device is put in stand-by when
the driver gets uninitialized.
The return value of the bma220_deinit() function isn't used as it does not
add any value. On the error path of the probe function, this can just
override the actual error with -EBUSY, or can even return 0 (no error), on
the error path.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210625140137.362282-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simple binding for this family of microchip DACs.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Welling <mwelling@ieee.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-16-jic23@kernel.org
This device was missing a binding document. Simple binding with the
ad8803 requiring two both low and high references whilst the 8801
only has a high reference.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-15-jic23@kernel.org
Documenting existing bindings for this device.
The Linux driver in theory 'works' without the two supplies that I have
listed as required, but without a valid scale. As such I've
documented it as required.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-14-jic23@kernel.org
This binding covers the ad5744, ad5744r, ad5764 and ad5764r DACs.
Note that the driver currently assumes the internal reference is used for
the r parts. The binding as defined relaxes this constraint.
There is no support in the binding or driver for the two digital IO
signals. I do not propose to add that until we have a means to
test any such binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-13-jic23@kernel.org
Straight forward binding with vref optional for those part with internal
regulators, but required for those without.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-12-jic23@kernel.org
The use of vcc-supply for the reference voltage is unusual and should
probably be deprecated as there is an explicit VREF pin on at least
some of these parts.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-11-jic23@kernel.org
William Breathitt Gray