MIPS protection bits are setup during runtime so using defines like
PAGE_READONLY ignores these runtime changes. To fix this we simply
use the page protection of the setup vma.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
BCM6318 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <F.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
BCM63268 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
BCM6368 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
BCM6362 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
BCM6358 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
BCM6328 SoCs have a reset controller for certain components.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add support for resetting blocks through the Linux reset controller
subsystem for BCM63xx SoCs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <F.fainelli@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
1.Refresh defconfig of CI20 to support OTG and RNG.
2.Refresh defconfig of CU1000-Neo to support OTG/RNG/OST/SC16IS752.
3.Refresh defconfig of CU1830-Neo to support OTG/DTRNG/OST/SC16IS752.
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested by: H. Nikolaus Schaller <hns@goldelico.com> # CI20/jz4780
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- fix for build error, when modules need has_transparent_hugepage
- fix for memleak in alchemy clk setup
-----BEGIN PGP SIGNATURE-----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=5NkQ
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.10_1' into mips-next
Pull in mips-fixes to get memblock fix.
- fix bug preventing booting on several platforms
- fix for build error, when modules need has_transparent_hugepage
- fix for memleak in alchemy clk setup
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If the clk_register fails, we should free h before
function returns to prevent memleak.
Fixes: 474402291a ("MIPS: Alchemy: clock framework integration of onchip clocks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The loop over all memblocks works with PFNs and not physical
addresses, so we need for_each_mem_pfn_range().
Fixes: b10d6bca87 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Commit c3e2ee6574 ("MIPS: generic: Add support for zboot") added
support for self-extracting images to Generic MIPS. However, the
intended way to boot Generic MIPS kernels is using FIT Images and
UHI boot protocol, but currently there's no way to make self-extracting
FIT Image (only legacy uzImages).
Add a target for this named "vmlinuz.itb", which will consist of
vmlinuz.bin and selected DT blobs. It will allow to have the advantages
of both UHI and self-extracting images.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
1. All final targets like vmlinuz.{bin,ecoff,srec} etc. should reside in
$(objtree)/arch/mips/boot, not in the root $(objtree) directory.
The only file that should be left there is vmlinuz, similar to other
architectures.
2. Add all the targets to $(targets) variable, so they'll be properly
accounted by Kbuild. This also allows to remove redundant
$(clean-files) (which were missing uzImage BTW).
3. Prefix all targets with $(obj)/$(objtree), depending on their
locations.
Misc: fix the identation of the 'STRIP' quiet message.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add a device trees and FIT image support for the Microsemi Serval SoC
which belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <lars.povlsen@microchip.com>.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add a device trees and FIT image support for the Microsemi Jaguar2 SoC
which belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <lars.povlsen@microchip.com>.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Luton now has already an u-boot port so let's build FIT images.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add a device tree for the Microsemi Luton PCB091 evaluation board.
It is based on the work of Lars Povlsen <lars.povlsen@microchip.com>.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add a device tree include file for the Microsemi Luton SoC which
belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <lars.povlsen@microchip.com>.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Ocelots is supported by the generic MIPS build so make it clears that
LEGACY_BOARD_OCELOT is only needed for legacy boards which didn't have
bootloader supporting device tree.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Ocelot belongs to a family of SoC named the VCore III. In order to add
these new Soc, use the new symbol SOC_VCOREIII instead of a one
dedicated to Ocelot.
In order to avoid regression on driver building, the MSCC_OCELOT
configuration symbol is kept until the driver will be converted.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Serval and Jaguar2 SoCs belong to the same family as Ocelot and Luton.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Luton SoC belongs to the same family as Ocelot.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When BCM47XX_BCMA is enabled and BCMA_DRIVER_PCI is disabled, it results
in the following Kbuild warning:
WARNING: unmet direct dependencies detected for BCMA_DRIVER_PCI_HOSTMODE
Depends on [n]: MIPS [=y] && BCMA_DRIVER_PCI [=n] && PCI_DRIVERS_LEGACY [=y] && BCMA [=y]=y
Selected by [y]:
- BCM47XX_BCMA [=y] && BCM47XX [=y] && PCI [=y]
The reason is that BCM47XX_BCMA selects BCMA_DRIVER_PCI_HOSTMODE without
depending on or selecting BCMA_DRIVER_PCI while BCMA_DRIVER_PCI_HOSTMODE
depends on BCMA_DRIVER_PCI. This can also fail building the kernel.
Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.
Fixes: c1d1c5d421 ("bcm47xx: add support for bcma bus")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209879
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When BCM47XX_SSB is enabled and SSB_PCIHOST is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for SSB_B43_PCI_BRIDGE
Depends on [n]: SSB [=y] && SSB_PCIHOST [=n]
Selected by [y]:
- BCM47XX_SSB [=y] && BCM47XX [=y] && PCI [=y]
The reason is that BCM47XX_SSB selects SSB_B43_PCI_BRIDGE without
depending on or selecting SSB_PCIHOST while SSB_B43_PCI_BRIDGE depends on
SSB_PCIHOST. This can also fail building the kernel as demonstrated in a
bug report.
Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210051
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In play_dead function, the whole 64-bit PC mailbox was used as a indicator
to determine if the master core had written boot jump information.
However, after we introduced CSR mailsend, the hardware will not guarante
an atomic write for the 64-bit PC mailbox. Thus we have to use the lower
32-bit which is written at the last as the jump indicator instead.
Signed-off-by: Lu Zeng <zenglu@loongson.cn>
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Loongson 3A4000+ CPU has per-core Mail_Send register to send mail,
there is no need to maintain register address of each core and node,
just simply specify cpu number.
Signed-off-by: Lu Zeng <zenglu@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In the current code, for example, core 1 sets Core[0, 1, 2, 3]_IPI_Enalbe
register and core 2, 3 do the same thing on the 1-way Loongson64 platform,
this is not necessary. Set IPI_Enable register per core by itself to avoid
duplicate operations and make the logic more clear.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The field ELPA of CP0_PAGEGRAIN register is set at the beginning
of the kernel entry point in kernel-entry-init.h, no need to set
it again in numa.c, we can remove enable_lpa() and only print the
related information.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The field LPA of CP0_CONFIG3 register is read only for Loongson64, so the
write operations are meaningless, remove them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove a tautology; since
commit 0bddd227f3 ("Documentation: update for gcc 4.9 requirement")
which raised the minimally supported version of GCC to 4.9, this case is
always true.
Link: https://github.com/ClangBuiltLinux/linux/issues/427
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Everything in arch/mips/include/uapi/asm/types.h is protected by
"#ifndef __KERNEL__", so it's unused for kernelspace.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
add missing iounmap() of pciu_base on error when failed to init
io_map_base.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the missing iounmap() of iounmap(mips_gcr_base) before
return from mips_cm_probe() in the error handling case.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the missing iounmap() of gpch->regs before return from
ar7_gpio_init() in the error handling case.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are a few spelling mistakes in the Kconfig, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This will make a separated section for dtb appear in ELF, and we can
then use objcopy to patch a dtb into vmlinuz when RAW_APPENDED_DTB
is set in kernel config.
command to patch a dtb:
objcopy --set-section-flags=.appended_dtb=alloc,contents \
--update-section=.appended_dtb=<target>.dtb vmlinuz
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are no users of this headers file in the kernel.
All users are likely migrated to device tree which is a good thing.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: linux-mips@vger.kernel.org
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add a description for /sys/firmware/lefi/boardinfo on the Loongson
platform.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add /sys/firmware/lefi/boardinfo to get mainboard and BIOS info easily
on the Loongson platform, this is useful to point out the current used
mainboard type and BIOS version when there exists problems related with
hardware or firmware.
The related structures are already defined in the interface specification
about firmware and kernel which are common requirement and specific for
Loongson64, so only add a new boardinfo.c file in arch/mips/loongson64.
E.g. with this patch:
[loongson@linux ~]$ cat /sys/firmware/lefi/boardinfo
Board Info
Manufacturer : LEMOTE
Board Name : LEMOTE-LS3A4000-7A1000-1w-V01-pc
Family : LOONGSON3
BIOS Info
Vendor : Kunlun
Version : Kunlun-A1901-V4.1.3-20200414093938
ROM Size : 4 KB
Release Date : 2020-04-14
By the way, using dmidecode command can get the similar info if there
exists SMBIOS in firmware, but the fact is that there is no SMBIOS on
some machines, we can see nothing when execute dmidecode, like this:
[root@linux loongson]# dmidecode
# dmidecode 2.12
# No SMBIOS nor DMI entry point found, sorry.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS should export its local version of "has_transparent_hugepage"
so that loadable modules (dax) can use it.
Fixes this build error:
ERROR: modpost: "has_transparent_hugepage" [drivers/dax/dax.ko] undefined!
Fixes: fd8cfd3000 ("arch: fix has_transparent_hugepage()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: linux-nvdimm@lists.01.org
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace". So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>