parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement preallocation via the fallocate syscall on VFAT partitions.
This patch is based on an earlier patch of the same name which had some
issues detailed below and did not get accepted. Refer
https://lkml.org/lkml/2007/12/22/130.
a) The preallocated space was not persistent when the
FALLOC_FL_KEEP_SIZE flag was set. It will deallocate cluster at evict
time.
b) There was no need to zero out the clusters when the flag was set
Instead of doing an expanding truncate, just allocate clusters and add
them to the fat chain. This reduces preallocation time.
Compatibility with windows:
There are no issues when FALLOC_FL_KEEP_SIZE is not set because it just
does an expanding truncate. Thus reading from the preallocated area on
windows returns null until data is written to it.
When a file with preallocated area using the FALLOC_FL_KEEP_SIZE was
written to on windows, the windows driver freed-up the preallocated
clusters and allocated new clusters for the new data. The freed up
clusters gets reflected in the free space available for the partition
which can be seen from the Volume properties.
The windows chkdsk tool also does not report any errors on a disk
containing files with preallocated space.
And there is also no issue using linux fat fsck. because discard
preallocated clusters at repair time.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.
This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it. c files
which need access to more backing-dev details now include
backing-dev.h directly. This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.
v2: fs/fat build failure fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
'fat.h' includes <linux/buffer_head.h> which includes <linux/fs.h> which
includes all the header files required for all *.c files fat filesystem.
[akpm@linux-foundation.org: fs/fat/iode.c needs seq_file.h]
[sfr@canb.auug.org.au: put one actually necessary include file back]
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When running FSX with direct I/O mode, fsx resulted in DATA past EOF issues.
fsx ./file2 -Z -r 4096 -w 4096
...
..
truncating to largest ever: 0x907c
fallocating to largest ever: 0x11137
truncating to largest ever: 0x2c6fe
truncating to largest ever: 0x2cfdf
fallocating to largest ever: 0x40000
Mapped Read: non-zero data past EOF (0x18628) page offset 0x629 is 0x2a4e
...
..
The reason being, it is doing a truncate down, but the zeroing does not
happen on the last block boundary when offset is not aligned. Even though
it calls truncate_setsize()->truncate_inode_pages()->
truncate_inode_pages_range() and considers the partial zeroout but it
retrieves the page using find_lock_page() - which only looks the page in
the cache. So, zeroing out does not happen in case of direct IO.
Make a truncate page based around block_truncate_page for FAT filesystem
and invoke that helper to zerout in case the offset is not aligned with
the blocksize.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch, originally from Android kernel, adds vfat ioctl command
FAT_IOCTL_GET_VOLUME_ID, with this command we can get the vfat volume ID
using following code:
ioctl(fd, FAT_IOCTL_GET_VOLUME_ID, &volume_ID)
This patch is a modified version of the patch by Mike Lockwood, with
changes from Dmitry Pervushin, who noticed the original patch makes some
volume IDs abiguous with error returns: for example, if volume id is
0xFFFFFDAD, that matches -ENOIOCTLCMD, we get "FFFFFFFF" from the user
space.
So add a parameter to ioctl to get the correct volume ID.
Android uses vfat volume ID to identify different sd card, when a new sd
card is inserted to device, android can scan the media on it and pop up
new contents.
Signed-off-by: Bintian Wang <bintian.wang@linaro.org>
Cc: dmitry pervushin <dpervushin@gmail.com>
Cc: Mike Lockwood <lockwood@android.com>
Cc: Colin Cross <ccross@android.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sean McNeil <sean@mcneil.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Define two nfs export_operation structures,one for 'stale_rw' mounts and
the other for 'nostale_ro'. The latter uses i_pos as a basis for encoding
and decoding file handles.
Also, assign i_pos to kstat->ino. The logic for rebuilding the inode is
added in the subsequent patches.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ravishankar N <ravi.n1@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When mnt_want_write() starts to handle freezing it will get a full lock
semantics requiring proper lock ordering. So push mnt_want_write() call
outside of i_mutex as in other places.
CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2. For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Let filesystems handle waiting for direct I/O requests themselves instead
of doing it beforehand. This means filesystem-specific locks to prevent
new dio referenes from appearing can be held. This is important to allow
generalizing i_dio_count to non-DIO_LOCKING filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a new rw_semaphore to protect bmap against truncate. Previous
i_alloc_sem was abused for this, but it's going away in this series.
Note that we can't simply use i_mutex, given that the swapon code
calls ->bmap under it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make sure we check the truncate constraints early on in ->setattr by adding
those checks to inode_change_ok. Also clean up and document inode_change_ok
to make this obvious.
As a fallout we don't have to call inode_newsize_ok from simple_setsize and
simplify it down to a truncate_setsize which doesn't return an error. This
simplifies a lot of setattr implementations and means we use truncate_setsize
almost everywhere. Get rid of fat_setsize now that it's trivial and mark
ext2_setsize static to make the calling convention obvious.
Keep the inode_newsize_ok in vmtruncate for now as all callers need an
audit for its removal anyway.
Note: setattr code in ecryptfs doesn't call inode_change_ok at all and
needs a deeper audit, but that is left for later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make sure we call inode_change_ok before doing any changes in ->setattr,
and make sure to call it even if our fs wants to ignore normal UNIX
permissions, but use the ATTR_FORCE to skip those.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Despite its name it's now a generic implementation of ->setattr, but
rather a helper to copy attributes from a struct iattr to the inode.
Rename it to setattr_copy to reflect this fact.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We don't name our generic fsync implementations very well currently.
The no-op implementation for in-memory filesystems currently is called
simple_sync_file which doesn't make too much sense to start with,
the the generic one for simple filesystems is called simple_fsync
which can lead to some confusion.
This patch renames the generic file fsync method to generic_file_fsync
to match the other generic_file_* routines it is supposed to be used
with, and the no-op implementation to noop_fsync to make it obvious
what to expect. In addition add some documentation for both methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
FAT does not require the BKL in its ioctl function, which is already serialized
through a mutex. Since we're already touching the ioctl code, also fix the
missing handling of FAT_IOCTL_GET_ATTRIBUTES in the compat code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
fat_cont_expand() is the only user of sync_page_range_nolock(). It's also the
only user of generic_osync_inode() which does not have a file open. So
opencode needed actions for FAT so that we can convert generic_osync_inode() to
a standard syncing path.
Update a comment about generic_osync_inode().
CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jan Kara <jack@suse.cz>
Commit 1faa16d228 accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* mark directory data blocks as assoc. metadata
* add new inode to deal with FAT, mark FAT blocks as assoc. metadata of that
* now ->fsync() is trivial both for files and directories
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split up fat_generic_ioctl and add separate functions for the two
implemented ioctls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
On severe errors FAT remounts itself in read-only mode. Allow to
specify FAT fs desired behavior through 'errors' mount option:
panic, continue or remount read-only.
`mount -t [fat|vfat] -o errors=[panic,remount-ro,continue] \
<bdev> <mount point>`
This is analog to ext2 fs 'errors' mount option.
Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Conflicts:
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
Fixed conflicts above by using the non 'tsk' versions.
Signed-off-by: James Morris <jmorris@namei.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: James Morris <jmorris@namei.org>
FAT has the ATTR_RO (read-only) attribute. But on Windows, the ATTR_RO
of the directory will be just ignored actually, and is used by only
applications as flag. E.g. it's setted for the customized folder by
Explorer.
http://msdn2.microsoft.com/en-us/library/aa969337.aspx
This adds "rodir" option. If user specified it, ATTR_RO is used as
read-only flag even if it's the directory. Otherwise, inode->i_mode
is not used to hold ATTR_RO (i.e. fat_mode_can_save_ro() returns 0).
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If inode->i_mode doesn't have S_WUGO, current code assumes it means
ATTR_RO. However, if (~[ufd]mask & S_WUGO) == 0, inode->i_mode can't
hold S_WUGO. Therefore the updated directory entry will always have
ATTR_RO.
This adds fat_mode_can_hold_ro() to check it. And if inode->i_mode
can't hold, uses -i_attrs to hold ATTR_RO instead.
With this, we don't set ATTR_RO unless users change it via ioctl() if
(~[ufd]mask & S_WUGO) == 0.
And on FAT_IOCTL_GET_ATTRIBUTES path, this adds ->i_mutex to it for
not returning the partially updated attributes by FAT_IOCTL_SET_ATTRIBUTES
to userland.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds three helpers:
fat_make_attrs() - makes FAT attributes from inode.
fat_make_mode() - makes mode_t from FAT attributes.
fat_save_attrs() - saves FAT attributes to inode.
Then this replaces: MSDOS_MKMODE() by fat_make_mode(), fat_attr() by
fat_make_attrs(), ->i_attrs = attr & ATTR_UNUSED by fat_save_attrs().
And for root inode, those is used with ATTR_DIR instead of bogus
ATTR_NONE.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This splits __KERNEL__ stuff in include/msdos_fs.h into fs/fat/fat.h.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FAT has to handle the newly introduced ATTR_TIMES_SET for allow_utime
option.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The FAT_IOCTL_SET_ATTRIBUTES ioctl() calls notify_change() to change
the file mode before changing the inode attributes. Replace with
explicit calls to security_inode_setattr(), fat_setattr() and
fsnotify_change().
This is equivalent to the original. The reason it is needed, is that
later in the series we move the immutable check into notify_change().
That would break the FAT_IOCTL_SET_ATTRIBUTES ioctl, as it needs to
perform the mode change regardless of the immutability of the file.
[Fix error if fat is built as a module. Thanks to OGAWA Hirofumi for
noticing.]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The FAT BKL removal patch can cause deadlocks. It turns out that the new
lock_super() calls are unneeded, remove them (as directed by Linus).
Reported-by: "Tony Luck" <tony.luck@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This replaces the use of the BKL in the FAT family of filesystems with the
existing superblock lock instead.
The code already appears to do mostly proper locking with its own private
spinlocks (and mutexes), but while the BKL could possibly have been
dropped entirely, converting it to use the superblock lock (which is just
a regular mutex) is the conservative thing to do.
As a per-filesystem mutex, it not only won't have any of the possible
latency issues related to the BKL, but the lock is obviously private to
the particular filesystem instance and will thus not cause problems for
entirely unrelated users like the BKL can.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
New chmod() allows only acceptable permission, and if not acceptable, it
returns -EPERM. Old one allows even if it can't store permission to on
disk inode. But it seems too strict for users.
E.g. https://bugzilla.redhat.com/show_bug.cgi?id=449080: With new one,
rsync couldn't create the temporary file.
So, this patch allows like old one, but now it doesn't change the
permission if it can't store, and it returns 0.
Also, this patch fixes missing check.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Normally utime(2) checks current process is owner of the file, or it
has CAP_FOWNER capability. But FAT filesystem doesn't have uid/gid as
on disk info, so normal check is too unflexible.
With this option you can relax it.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix fat_setattr() on the case of showexec option. If user specified
showexec option, inode->i_mode may not have S_IXUGO. This just use
inode->i_mode to fix it.
And with this patch, we don't allow chmod() on memory inode, it's just
bad behaviour. IOW, we allow changing S_IWUGO only which can be stored
to disk.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro