As per USB Type-C Spec R2.0 section 4.5.1.2 (Connecting Sources and Sinks)
and section 4.5.2.2 (Connection State Machine Requirements), the typical
flow for configuring a device connected to a typeC port is as below:
1. Source/sink detection
2. Orientation
3. Data role
4. VCONN
5. VBUS (USB Type-C currents)
6. The connector is now configured. We can start the PD communication
that should lead into configuration of the mux if we enter a mode.
But in existing code data role was set after the connector and mux are
already configured. So fix this by following the spec to set the data
role before the connector and mux are configured.
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
On disconnect port partner is removed and usb role is set to NONE.
But then in cros_typec_port_update() the role is set again.
Avoid this by moving usb_role_switch_set_role() to
cros_typec_configure_mux().
Suggested-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
usb_role_switch_set_role() has the second argument as enum for usb_role.
Currently depending upon the data role i.e. UFP(0) or DFP(1) is sent.
This eventually translates to USB_ROLE_NONE in case of UFP and
USB_ROLE_DEVICE in case of DFP. Correct this by sending correct enum
values as USB_ROLE_DEVICE in case of UFP and USB_ROLE_HOST in case of
DFP.
Fixes: 7e7def15fa ("platform/chrome: cros_ec_typec: Add USB mux control")
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
With USB4 mode the mux driver needs the Enter_USB Data
Object (EUDO) that was used when the USB mode was entered.
Though the object is not available in the driver, it is
possible to construct it from the information we have.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The EC reports a variety of error codes. Most of those, with the exception
of EC_RES_INVALID_VERSION, are converted to -EPROTO. As result, the actual
EC error code gets lost. Introduce cros_ec_map_error() to map EC error
codes to Linux error codes, and use it in cros_ec_cmd_xfer_status() to
report more meaningful errors to the caller. With this change, callers of
cros_ec_cmd_xfer_status() can implement a more distinguished action without
having to rely on the EC error code. At the same time, debugging is improved
in situations where the Linux error code is reported to userspace and/or in
the kernel log.
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
-ENOTSUPP is not a SUSV4 error code and should not be used. Use
-ENOPROTOOPT instead to report EC_RES_INVALID_VERSION responses
from the EC. This matches match the NFS response for unsupported
protocol versions.
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Since commit c5cd2b47b2 ("platform/chrome: cros_ec_proto: Report command
not supported") we can no longer assume that cros_ec_cmd_xfer_status()
reports -EPROTO for all errors returned by the EC itself. A follow-up
patch will change cros_ec_cmd_xfer_status() to report additional errors
reported by the EC as distinguished Linux error codes.
Prepare for this change by always reporting both the Linux error code
and the EC error code in sysfs attributes.
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Since commit c5cd2b47b2 ("platform/chrome: cros_ec_proto: Report command
not supported") we can no longer assume that cros_ec_cmd_xfer_status()
reports -EPROTO for all errors returned by the EC itself. A follow-up
patch will change cros_ec_cmd_xfer_status() to report additional errors
reported by the EC as distinguished Linux error codes.
Handle this change by no longer assuming that -EPROTO is used to report
all errors returned by the EC itself. Since errors reported by the EC are
already reported in text form through sysfs attributes, extend this form
of error reporting to all errors reported by cros_ec_cmd_xfer_status().
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* cros_ec_typec
- Add support for switch control and alternate modes to the Chrome EC Type C
port driver
- Add basic suspend/resume support
* sensorhub:
- Fix timestamp overflow issue
- Fix legacy timestamp spreading on Nami systems
* cros_ec_proto:
- After removing all users of, stop exporting cros_ec_cmd_xfer
- Check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK and ignore wakeups on old
ECs
* misc:
- Documentation warning cleanup.
- Fix double unlock issue in ishtp
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXzG3VwAKCRBzbaomhzOw
wkRMAQCjvqZwbMJ+jNXsgqb5+78WN6i4PC5e7lzjPofHEdE6sAEAm4FiTpcEc/Kk
qnti54fb3O15I/x8sXWceznXbdFAigw=
=zFfw
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Add support for switch control and alternate modes to the Chrome EC
Type C port driver
- Add basic suspend/resume support
sensorhub:
- Fix timestamp overflow issue
- Fix legacy timestamp spreading on Nami systems
cros_ec_proto:
- After removing all users of, stop exporting cros_ec_cmd_xfer
- Check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK and ignore
wakeups on old ECs
misc:
- Documentation warning cleanup
- Fix double unlock issue in ishtp"
* tag 'tag-chrome-platform-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (21 commits)
platform/chrome: cros_ec_proto: check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK
platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs
platform/chrome: cros_ec_sensorhub: Simplify legacy timestamp spreading
platform/chrome: cros_ec_proto: Do not export cros_ec_cmd_xfer()
platform/chrome: cros_ec_typec: Unregister partner on error
platform/chrome: cros_ec_sensorhub: Fix EC timestamp overflow
platform/chrome: cros_ec_typec: Add PM support
platform/chrome: cros_ec_typec: Use workqueue for port update
platform/chrome: cros_ec_typec: Add a dependency on USB_ROLE_SWITCH
platform/chrome: cros_ec_ishtp: Fix a double-unlock issue
platform/chrome: cros_ec_rpmsg: Document missing struct parameters
platform/chrome: cros_ec_spi: Document missing function parameters
platform/chrome: cros_ec_typec: Add TBT compat support
platform/chrome: cros_ec: Add TBT pd_ctrl fields
platform/chrome: cros_ec_typec: Make configure_mux static
platform/chrome: cros_ec_typec: Support DP alt mode
platform/chrome: cros_ec_typec: Add USB mux control
platform/chrome: cros_ec_typec: Register PD CTRL cmd v2
platform/chrome: cros_ec: Update mux state bits
platform/chrome: cros_ec_typec: Register Type C switches
...
static priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low' priority level,
plus sched_set_normal() to set the policy back to non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in a separate
tree.
When merging to the latest upstream tree there's a conflict in drivers/spi/spi.c,
which can be resolved via:
sched_set_fifo(ctlr->kworker_task);
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/7JH
-----END PGP SIGNATURE-----
Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched/fifo updates from Ingo Molnar:
"This adds the sched_set_fifo*() encapsulation APIs to remove static
priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low'
priority level, plus sched_set_normal() to set the policy back to
non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in
a separate tree"
* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched,tracing: Convert to sched_set_fifo()
sched: Remove sched_set_*() return value
sched: Remove sched_setscheduler*() EXPORTs
sched,psi: Convert to sched_set_fifo_low()
sched,rcutorture: Convert to sched_set_fifo_low()
sched,rcuperf: Convert to sched_set_fifo_low()
sched,locktorture: Convert to sched_set_fifo()
sched,irq: Convert to sched_set_fifo()
sched,watchdog: Convert to sched_set_fifo()
sched,serial: Convert to sched_set_fifo()
sched,powerclamp: Convert to sched_set_fifo()
sched,ion: Convert to sched_set_normal()
sched,powercap: Convert to sched_set_fifo*()
sched,spi: Convert to sched_set_fifo*()
sched,mmc: Convert to sched_set_fifo*()
sched,ivtv: Convert to sched_set_fifo*()
sched,drm/scheduler: Convert to sched_set_fifo*()
sched,msm: Convert to sched_set_fifo*()
sched,psci: Convert to sched_set_fifo*()
sched,drbd: Convert to sched_set_fifo*()
...
As with cros_ec_cmd_xfer_status(), etc., it's not enough to simply check
for the return status of send_command() -- that only covers transport or
other similarly-fatal errors. One must also check the ->result field, to
see whether the command really succeeded. If not, we can't use the data
it returns.
The caller of cros_ec_get_host_event_wake_mask() ignores this, and so
for example, on EC's where the command is not implemented, we're using
junk (or in practice, all zeros) for our wake-mask. We should be using a
non-zero default (currently, it's supposed to be all-1's).
Fix this by checking the ->result field and returning -EPROTO for
errors.
I might label this as fixing commit 29d99b966d ("cros_ec: Don't signal
wake event for non-wake host events"), except that this fix alone
actually may make things worse, as it now allows for a lot more spurious
wakeups. The patch "platform/chrome: cros_ec_proto: ignore battery/AC
wakeups on old ECs" helps to mitigate this.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
ECs that don't implement EC_CMD_HOST_EVENT_GET_WAKE_MASK should still
have some reasonable default mask -- otherwise, they'll treat a variety
of EC signals as spurious wakeups. Battery and AC events can be
especially common, for devices that have been sitting at full charge
plugged into AC for a long time, as they may cycle their charging off
and on, or their battery may start reporting failures as it ages.
Treating these as wakeups does not serve a useful purpose, and is
instead often counterproductive. And indeed, later ECs (that implement
the mask) don't include these events in their wake-mask.
Note that this patch doesn't do anything without the subsequent patch
("platform/chrome: cros_ec_proto: check for missing
EC_CMD_HOST_EVENT_GET_WAKE_MASK"), because
cros_ec_get_host_event_wake_mask() currently does not return an error if
EC_CMD_HOST_EVENT_GET_WAKE_MASK is not implemented.
Some additional notes:
While the EC typically knows not to wake the CPU for these unimportant
events once the CPU reaches a sleep state, it doesn't really have a way
to know that the CPU is "almost" asleep, unless it has support for
EC_CMD_HOST_SLEEP_EVENT. Alas, these older ECs do not support that
command either, so this solution is not 100% complete.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
On some machines (nami), interrupt latency cause samples to appear
to be from the future and are pegged to the current time.
We would see samples with this pattern:
[t, t + ~5ms, t + ~10ms, t + ~10ms + 100us, t + ~10ms + 200us],
(current now) (current now)
(t is the last timestamp time)
Last 2 samples would be barely spread, causing applications to
complain.
We now spread the entire sequence. This is not great: in the example
the sensor was supposed to send samples every 5ms, it now appears to
send one every 2.5ms, but it is slightly closer to reality:
sampling time in the example above
At sensor level
1 2 3 4 5
+-----5ms-----+-----5ms-----+-----5ms-----+----5ms-----+---> t
Before, at host level
1 2 3 4 5
--interrupt delay------+-----5ms-----+-----5ms-----+-+-+---> t
Afer, at host level
1 2 3 4 5
--interrupt delay------+-2.5ms-+-2.5ms-+-2.5ms-+-2.5ms-+---> t
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Now that all the remaining users of cros_ec_cmd_xfer() has been removed,
make this function private to the cros_ec_proto module.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
When port update is called during probe(), any error with setting the
Type C muxes results in an errno being returned to probe(), which promptly
returns that itself. Ensure that we unregister any registered partners
when doing so, to prevent orphaned partners on the Type C connector
class framework.
Move the cros_typec_add_partner() and cros_typec_remove_partner() code
together to higher up in the file, so that they are together, and we can
call cros_typec_remove_partner() from cros_unregister_ports().
Fixes: 7e7def15fa ("platform/chrome: cros_ec_typec: Add USB mux control")
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
EC is using 32 bit timestamps (us), and before converting it to 64bit
they were not casted, so it would overflow every 4s.
Regular overflow every ~70 minutes was not taken into account either.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Define basic suspend resume functions for cros-ec-typec. On suspend, we
simply ensure that any pending port update work is completed, and on
resume, we re-poll the port state to account for any
changes/disconnections that might have occurred during suspend.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Use a work queue to call the port update routines, instead of doing it
directly in the PD notifier callback. This will prevent other drivers
with PD notifier callbacks from being blocked on the port update routine
completing.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
As reported by the kernel test robot the cros_ec_typec driver fails to
build if the USB_ROLE_SWITCH is not selected, to fix that, add a
dependency on that symbol. This fixes the following build error:
drivers/platform/chrome/cros_ec_typec.c:133: undefined reference to `usb_role_switch_put'
ld: drivers/platform/chrome/cros_ec_typec.o: in function `cros_typec_get_switch_handles':
drivers/platform/chrome/cros_ec_typec.c:108: undefined reference to `fwnode_usb_role_switch_get'
ld: drivers/platform/chrome/cros_ec_typec.c:117: undefined reference to `usb_role_switch_put'
Fixes: 7e7def15fa ("platform/chrome: cros_ec_typec: Add USB mux control")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
In function cros_ec_ishtp_probe(), "up_write" is already called
before function "cros_ec_dev_init". But "up_write" will be called
again after the calling of the function "cros_ec_dev_init" failed.
Thus add a call of the function “down_write” in this if branch
for the completion of the exception handling.
Fixes: 26a14267af ("platform/chrome: Add ChromeOS EC ISHTP driver")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Tested-by: Mathew King <mathewk@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Kerneldoc expects all kernel structure member to be documented.
Fixes the following W=1 level warnings:
cros_ec_rpmsg.c:49: warning: Function parameter or member 'ept' not described in 'cros_ec_rpmsg'
cros_ec_rpmsg.c:49: warning: Function parameter or member 'has_pending_host_event' not described in 'cros_ec_rpmsg'
cros_ec_rpmsg.c:49: warning: Function parameter or member 'probe_done' not described in 'cros_ec_rpmsg'
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Kerneldoc expects all kernel function members to be documented.
Fixes the following W=1 level warnings:
cros_ec_spi.c:153: warning: Function parameter or member 'ec_dev' not described in 'receive_n_bytes'
cros_ec_spi.c:153: warning: Function parameter or member 'buf' not described in 'receive_n_bytes'
cros_ec_spi.c:153: warning: Function parameter or member 'n' not described in 'receive_n_bytes'
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Since cros_typec_configure_mux() is only used in cros-ec-typec,
it should be marked static.
Fixes: 7e7def15fa ("platform/chrome: cros_ec_typec: Add USB mux control")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Handle Chrome EC mux events to configure on-board muxes correctly while
entering DP alternate mode. Since we don't surface SVID and VDO
information regarding the DP alternate mode, configure the Type C
muxes directly from the port driver. Later, when mode discovery
information is correctly surfaced to the driver, we can register the DP
alternate mode driver and let it handle the mux configuration.
Also, modify the struct_typec_state state management to account for the
addition of DP alternate mode.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add support to configure various Type C switches appropriately using the
Type C connector class API, when the Chrome OS EC informs the AP that
the USB operating mode has been entered.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Recognize EC_CMD_USB_PD_CONTROL command version 2. This is necessary in
order to process Type C mux information (like DP alt mode pin
configuration), which is needed by the Type C Connector class API to
configure the Type C muxes correctly
While we are here, rename the struct member storing this version number
from cmd_ver to pd_ctrl_ver, which more accurately reflects what is
being stored.
Also, slightly change the logic for calling
cros_typec_set_port_params_*(). Now, v0 is called when pd_ctrl_ver is 0,
and v1 is called otherwise.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Register Type C mux and switch handles, when provided via firmware
bindings. These will allow the cros-ec-typec driver, and also alternate
mode drivers to configure connected Muxes correctly, according to PD
information retrieved from the Chrome OS EC.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
When EC does not support uptime command (EC_CMD_GET_UPTIME_INFO),
do not create the uptime sysfs entry point.
User space application will not probe the file needlessly.
The EC console log will not contain EC_CMD_GET_UPTIME_INFO anymore.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add support for controlling voltage regulator that is connected and
controlled by ChromeOS EC. Kernel controls these regulators through
newly added EC host commands.
Changes from v5:
* Move new host command to a separate patch.
* Use devm_regulator_register.
* Address review comments.
Changes from v4:
* Change compatible name from regulator-cros-ec to cros-ec-regulator.
Changes from v3:
* Fix dt bindings file name.
* Remove check around CONFIG_OF in driver.
* Add new host commands to cros_ec_trace.
* Address review comments.
Changes from v2:
* Add 'depends on OF' to Kconfig.
* Add Kconfig description about compiling as module.
Changes from v1:
* Change compatible string to google,regulator-cros-ec.
* Use reg property in device tree.
* Change license for dt binding according to checkpatch.pl.
* Address comments on code styles.
Pi-Hsun Shih (3):
dt-bindings: regulator: Add DT binding for cros-ec-regulator
platform/chrome: cros_ec: Add command for regulator control.
regulator: Add driver for cros-ec-regulator
.../regulator/google,cros-ec-regulator.yaml | 51 ++++
drivers/platform/chrome/cros_ec_trace.c | 5 +
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/cros-ec-regulator.c | 257 ++++++++++++++++++
.../linux/platform_data/cros_ec_commands.h | 82 ++++++
6 files changed, 406 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
create mode 100644 drivers/regulator/cros-ec-regulator.c
base-commit: b791d1bdf9
--
2.27.0.290.gba653c62da-goog
Add host commands for voltage regulator control through ChromeOS EC.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200612040526.192878-3-pihsun@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Ingo suggested that since the new sched_set_*() functions are
implemented using the 'nocheck' variants, they really shouldn't ever
fail, so remove the return value.
Cc: axboe@kernel.dk
Cc: daniel.lezcano@linaro.org
Cc: sudeep.holla@arm.com
Cc: airlied@redhat.com
Cc: broonie@kernel.org
Cc: paulmck@kernel.org
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
No effective change.
Cc: broonie@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* cros_ec_typec
- Add notifier for update, and register port partner
* Sensors/iio:
- Fixes to cros_ec_sensorhub around allocation of resources, and send_sample.
* Wilco EC
- Fix to output format of h1_gpio
* Misc
- Misc fixes to appease kernel-doc and other warnings.
- Set user space log size in chromeos_pstore
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXtbFXgAKCRBzbaomhzOw
woJ3AQDUNnb4ocSXLRyg8IDgLWcA7rjT53jzuvPioTUunRoYAAEA/FR8tQWYOz6e
91ZBHrkQB4fm2w9GQsJk5OpOy8qtZwA=
=9IiQ
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Add notifier for update, and register port partner
Sensors/iio:
- Fixes to cros_ec_sensorhub around allocation of resources, and
send_sample
Wilco EC:
- Fix to output format of h1_gpio
Misc:
- Misc fixes to appease kernel-doc and other warnings
- Set user space log size in chromeos_pstore"
* tag 'tag-chrome-platform-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_usbpd_logger: Add __printf annotation to append_str()
platform/chrome: cros_ec_i2c: Appease the kernel-doc deity
platform/chrome: typec: Fix ret value check error
platform/chrome: cros_ec_typec: Register port partner
platform/chrome: cros_ec_typec: Add struct for port data
platform/chrome: cros_ec_typec: Use notifier for updates
platform/chrome: cros_ec_ishtp: free ishtp buffer before sending event
platform/chrome: cros_ec_ishtp: skip old cros_ec responses
platform/chrome: wilco_ec: Provide correct output format to 'h1_gpio' file
platform/chrome: chromeos_pstore: set user space log size
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage (WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)
-----BEGIN PGP SIGNATURE-----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=7s1u
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
Now that pstore_register() can correctly pass max_reason to the kmesg
dump facility, introduce a new "max_reason" module parameter and
"max-reason" Device Tree field.
The "dump_oops" module parameter and "dump-oops" Device
Tree field are now considered deprecated, but are now automatically
converted to their corresponding max_reason values when present, though
the new max_reason setting has precedence.
For struct ramoops_platform_data, the "dump_oops" member is entirely
replaced by a new "max_reason" member, with the only existing user
updated in place.
Additionally remove the "reason" filter logic from ramoops_pstore_write(),
as that is not specifically needed anymore, though technically
this is a change in behavior for any ramoops users also setting the
printk.always_kmsg_dump boot param, which will cause ramoops to behave as
if max_reason was set to KMSG_DUMP_MAX.
Co-developed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-6-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
This allows the compiler to verify the format strings vs the types of
the arguments. Also, silence the warning (triggered by W=1):
cros_usbpd_logger.c:55:2: warning: function ‘append_str’ might be a
candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Replace a comment starting with /** by simply /* to avoid having
it interpreted as a kernel-doc comment.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Merging 5.7 fixes branch as of April 29, containing one fix to branch
destined for chrome-platform-5.8.
b31d1d2b1c platform/chrome: cros_ec_sensorhub: Allocate sensorhub resource before claiming sensors
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Allocate callbacks array before enumerating the sensors: The probe routine
for these sensors (for instance cros_ec_sensors_probe) can be called
within the sensorhub probe routine (cros_ec_sensors_probe())
Fixes: 145d59baff ("platform/chrome: cros_ec_sensorhub: Add FIFO support")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
cros_typec_add_partner() returns 0 on success, so check for "ret"
instead of "!ret" as an error.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Fixes: 9d33ea3310 ("platform/chrome: cros_ec_typec: Register port partner")
Signed-off-by: Benson Leung <bleung@chromium.org>
Register (and unregister) the port partner when a connect (and
disconnect) is detected.
Co-developed-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add a separate struct for storing port data, including Type C connector
class struct pointers and caps.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Register a listener for the cros-usbpd-notifier, and update port state
when a notification comes in.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Merging 5.7 fixes branch as of April 13, containing two fixes to branch
destined for chrome-platform-5.8.
538b8471fe platform/chrome: cros_ec_sensorhub: Add missing '\n' in log messages
5b69c23799 platform/chrome: cros_ec_sensorhub: Off by one in cros_sensorhub_send_sample()
Signed-off-by: Benson Leung <bleung@chromium.org>
Recycle the ISH buffer before notifying of a response or an event. Often
a new message is sent in response to an event and in high traffic
scenarios this can lead to exhausting all available buffers. We can
ensure we are using the fewest buffers possible by freeing buffers as
soon as they are used.
Signed-off-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Mathew King <mathewk@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The ISHTP layer can give us old responses that we already gave up on. We
do not want to interpret these old responses as the current response we
are waiting for.
The cros_ish should only have one request in flight at a time. We send
the request and wait for the response from the ISH. If the ISH is too
slow to respond we give up on that request and we can send a new
request. The ISH may still send the response to the request that timed
out and without this we treat the old response as the response to the
current command. This is a condition that should not normally happen but
it has been observed with a bad ISH image. So add a token to the request
header which is copied into the response header when the ISH processes
the message to ensure that response is for the current request.
Signed-off-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Mathew King <mathewk@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Function 'h1_gpio_get' is receiving 'val' parameter of type u64,
this is being passed to 'send_ec_cmd' as type u8, thus, result
is stored in least significant byte. Due to output format,
the whole 'val' value was being displayed when any of the most
significant bytes are different than zero.
This fix will make sure only least significant byte is displayed
regardless of remaining bytes value.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
On x86 ChromiumOS devices, the pmsg_size is set to 0 (check
/sys/module/ramoops/parameters/pmsg_size): this prevents use of
pstore-pmsg, even if CONFIG_PSTORE_PMSG is enabled. Set pmsg_size
to a value that is consistent with the size used on non-x86 ChromiumOS
devices.
Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
Fixes: 145d59baff ("platform/chrome: cros_ec_sensorhub: Add FIFO support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The sensorhub->push_data[] array has sensorhub->sensor_num elements.
It's allocated in cros_ec_sensorhub_ring_add(). So the > should be >=
to prevent a read one element beyond the end of the array.
Fixes: 145d59baff ("platform/chrome: cros_ec_sensorhub: Add FIFO support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The use of `delay_usecs` in terminate_request() was replaced with the new
`delay` struct used by the SPI subsystem, however the unit was
set to SPI_DELAY_UNIT_NSECS instead of SPI_DELAY_UNIT_USECS. This fixes that.
Fixes: 7d3ca507fd ("platform/chrome: cros_ec_spi: Use new structure for SPI transfer delays")
Signed-off-by: Benson Leung <bleung@chromium.org>
Events are timestamped in EC time space, their timestamps need to be
converted in host time space.
The assumption is the time delta between when the interrupt is sent
by the EC and when it is receive by the host is a [small] constant.
This is not always true, even with hard-wired interrupt. To mitigate
worst offenders, add a median filter to weed out bigger than expected
delays.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
cros_ec_sensorhub registers a listener and query motion sense FIFO,
spread to iio sensors registers.
To test, we can use libiio:
iiod&
iio_readdev -u ip:localhost -T 10000 -s 25 -b 16 cros-ec-gyro | od -x
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To better manage resources, store the number of sensors reported by
the EC.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
When converting to i2c_new_scanned_device(), it was overlooked that a
conversion to i2c_new_client_device() was also needed. Fix it.
Fixes: c82ebf1bf7 ("platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
After registering the ports at probe, get the current port information
from EC and update the Type C connector class ports accordingly.
Co-developed-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add a driver to implement the Type C connector class for Chrome OS
devices with ECs (Embedded Controllers).
The driver relies on firmware device specifications for various port
attributes. On ACPI platforms, this is specified using the logical
device with HID GOOG0014. On DT platforms, this is specified using the
DT node with compatible string "google,cros-ec-typec".
The driver reads the device FW node and uses the port attributes to
register the typec ports with the Type C connector class framework, but
doesn't do much else.
Subsequent patches will add more functionality to the driver, including
obtaining current port information (polarity, vconn role, current power
role etc.) after querying the EC.
Co-developed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Read the PD host even status from the EC and send that to the notifier
listeners, for more fine-grained event information.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Convert the ACPI driver into the equivalent platform driver, with the
same ACPI match table as before. This allows the device driver to access
the parent platform EC device and its cros_ec_device struct, which will
be required to communicate with the EC to pull PD Host event information
from it.
Also change the ACPI driver name to "cros-usbpd-notify-acpi" so that
there is no confusion between it and the "regular" platform driver on
platforms that have both CONFIG_ACPI and CONFIG_OF enabled.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Introduce a device driver data structure, cros_usbpd_notify_data, in
which we can store the notifier block object and pointers to the struct
cros_ec_device and struct device objects.
This will make it more convenient to access these pointers when
executing both platform and ACPI callbacks.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
cros-usbpd-notify notifier was returning NOTIFY_BAD when no host event
was available in the MKBP message.
But MKBP messages are used to transmit other information, so return
NOTIFY_DONE instead, to allow other notifier to be called.
Fixes: ec2daf6e33 ("platform: chrome: Add cros-usbpd-notify driver")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Remove the CONFIG_ prefix from the select statement for MFD_CROS_EC.
Fixes: 2fa2b980e3 ("mfd / platform: cros_ec: Rename config to a better name")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). It allows us to remove some redundand code. In this
case, though, we are changing a bit the behaviour because of returning
-EINVAL on protocol error we propagate the error return for
cros_ec_cmd_xfer_status() function, but I think it will be fine, even
more clear as we don't mask the Linux error code.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Looking at the code I am even unsure that makes sense differentiate
these two errors but let's not change the behaviour for now.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
In practice most drivers that use the EC protocol what really care is if
the result was successful or not, hence, we introduced a
cros_ec_cmd_xfer_status() function that converts EC errors to standard
Linux error codes. On some few cases, though, we are interested on know
if the command is supported or not, and in such cases, just ignore the
error. To achieve this, return a -ENOTSUPP error when the command is not
supported.
This will allow us to finish the conversion of all users to use the
cros_ec_cmd_xfer_status() function instead of cros_ec_cmd_xfer() and
make the latest private to the protocol driver, so users of the protocol
are not confused in which function they should use.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272d ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Host event can be sent by remoteproc by any time, and
cros_ec_rpmsg_callback would be called after cros_ec_rpmsg_create_ept.
But the cros_ec_device is initialized after that, which cause host event
handler to use cros_ec_device that are not initialized properly yet.
Fix this by don't schedule host event handler before cros_ec_register
returns. Instead, remember that we have a pending host event, and
schedule host event handler after cros_ec_register.
Fixes: 71cddb7097 ("platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed.")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
RO and RW of EC may have different EC protocol version. If EC transitions
between RO and RW, but AP does not reboot (this is true for fingerprint
microcontroller / cros_fp, but not true for main ec / cros_ec), the AP
still uses the protocol version queried before transition, which can
cause problems. In the case of fingerprint microcontroller, this causes
AP to send the wrong version of EC_CMD_GET_NEXT_EVENT to RO in the
interrupt handler, which in turn prevents RO to clear the interrupt
line to AP, in an infinite loop.
Once an EC_HOST_EVENT_INTERFACE_READY is received, we know that there
might have been a transition between RO and RW, so re-query the protocol.
Signed-off-by: Yicheng Li <yichengli@chromium.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Replace with appropriate types.h.
Also there is no need to include device.h, but mutex.h.
For the pointers to unknown structures use forward declarations.
In the *.c files we need to include all headers that provide APIs
being used in the module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Merge 0cbb4f9c69 ("platform/chrome: wilco_ec: Include asm/unaligned instead of
linux/ path") from chrome-platform-5.6-fixes into for-next destined branch.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
It seems that we shouldn't try to include the include/linux/ path to
unaligned functions. Just include asm/unaligned.h instead so that we
don't run into compilation warnings like below.
In file included from drivers/platform/chrome/wilco_ec/properties.c:8:0:
include/linux/unaligned/le_memmove.h:7:19: error: redefinition of 'get_unaligned_le16'
static inline u16 get_unaligned_le16(const void *p)
^~~~~~~~~~~~~~~~~~
In file included from arch/ia64/include/asm/unaligned.h:5:0,
from arch/ia64/include/asm/io.h:23,
from arch/ia64/include/asm/smp.h:21,
from include/linux/smp.h:68,
from include/linux/percpu.h:7,
from include/linux/arch_topology.h:9,
from include/linux/topology.h:30,
from include/linux/gfp.h:9,
from include/linux/xarray.h:14,
from include/linux/radix-tree.h:18,
from include/linux/idr.h:15,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/device.h:16,
from include/linux/platform_data/wilco-ec.h:11,
from drivers/platform/chrome/wilco_ec/properties.c:6:
include/linux/unaligned/le_struct.h:7:19: note: previous definition of 'get_unaligned_le16' was here
static inline u16 get_unaligned_le16(const void *p)
^~~~~~~~~~~~~~~~~~
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 60fb8a8e93 ("platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
ChromiumOS uses ACPI device with HID "GOOG0003" for power delivery
related events. The existing cros-usbpd-charger driver relies on these
events without ever actually receiving them on ACPI platforms. This is
because in the ChromeOS kernel trees, the GOOG0003 device is owned by an
ACPI driver that offers firmware updates to USB-C chargers.
Introduce a new platform driver under cros-ec, the ChromeOS embedded
controller, that handles these PD events and dispatches them
appropriately over a notifier chain to all drivers that use them.
On platforms that don't have the ACPI device defined, the driver gets
instantiated for ECs which support the EC_FEATURE_USB_PD feature bit,
and the notification events will get delivered using the MKBP event
handling mechanism.
Co-Developed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-By: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
The 'cros_ec' core driver is the common interface for the cros_ec
transport drivers to do the shared operations to register, unregister,
suspend, resume and handle_event. The interface is provided by including
the header 'include/linux/platform_data/cros_ec_proto.h', however, instead
of have the implementation of these functions in cros_ec_proto.c, it is in
'cros_ec.c', which is a different kernel module. Apart from being a bad
practice, this can induce confusions allowing the users of the cros_ec
protocol to call these functions.
The register, unregister, suspend, resume and handle_event functions
*should* only be called by the different transport drivers (i2c, spi, lpc,
etc.), so make this a bit less confusing by moving these functions from
the public in-kernel space to a private include in platform/chrome, and
then, the interface for cros_ec module and for the cros_ec_proto module is
clean.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
This include isn't used. Remove it.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Enable this Kconfig on COMPILE_TEST enabled configs so we can get more
build coverage.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
printk messages all require newlines, or it looks very odd in the log
when messages are not on different lines. Add them.
Cc: Nick Crews <ncrews@chromium.org>
Cc: Daniel Campello <campello@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The EC on the Wilco platform responds with 0xFF to commands related to
the keyboard backlight on the absence of a keyboard backlight module.
This change allows the EC driver to continue loading even if the
backlight module is not present.
Fixes: 119a3cb6d6 ("platform/chrome: wilco_ec: Add keyboard backlight LED support")
Signed-off-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
The unregistration should happen in the opposite order of
the registration, so change it accordingly.
No real issue has been noticed, but it is good practice to
keep the correct unregistration order.
Signed-off-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This header file now only includes the cros_ec_dev struct, however, is the
'include/linux/platform_data/cros_ec_proto.h' who contains the definition of
all the Chrome OS EC related structs. There is no reason to have a
separate include for this struct so move to the place where other
structs are defined. That way, we can remove the include itself, but also
simplify the common pattern
#include <linux/mfd/cros_ec.h>
#include <linux/platform_data/cros_ec_proto.h>
for a single include
#include <linux/platform_data/cros_ec_proto.h>
The changes to remove the cros_ec.h include were generated with the
following shell script:
git grep -l "<linux/mfd/cros_ec.h>" | xargs sed -i '/<linux\/mfd\/cros_ec.h>/d'
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The init_lock is not declared or used outside of cros_ec_ishtp.c
so make it static to avoid the following warning:
drivers/platform/chrome/cros_ec_ishtp.c:79:1: warning: symbol 'init_lock' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Move from the deprecated i2c_new_probed_device() to the new
i2c_new_scanned_device(). Make use of the new ERRPTR if suitable.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
As platform_get_irq() now prints an error when the interrupt does not
exist, use platform_get_irq_optional() to get the IRQ which is optional
to avoid below error message during probe:
[ 5.113502] cros_ec_lpcs GOOG0004:00: IRQ index 0 not found
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Add the ability to view response codes as well.
I dropped the EVENT_CLASS since there is only one event per class.
cros_ec_cmd has now been renamed to cros_ec_request_start.
Example:
$ echo 1 > /sys/kernel/debug/tracing/events/cros_ec/enable
$ cat /sys/kernel/debug/tracing/trace
369.416372: cros_ec_request_start: version: 0, command: EC_CMD_USB_PD_POWER_INFO
369.420528: cros_ec_request_done: version: 0, command: EC_CMD_USB_PD_POWER_INFO, ec result: EC_RES_SUCCESS, retval: 16
369.420529: cros_ec_request_start: version: 0, command: EC_CMD_USB_PD_DISCOVERY
369.421383: cros_ec_request_done: version: 0, command: EC_CMD_USB_PD_DISCOVERY, ec result: EC_RES_SUCCESS, retval: 5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
There are some EC commands that are not included yet as trace commands,
in order to get all the traces for the all supported commands match the
commands accordingly.
Note that a change, adding or removing an EC command, should be
reflected in the cros_ec_trace.c file in order to avoid mismatches
again.
The list of current commands is generated using the following script:
sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1),\\/p' \
include/linux/platform_data/cros_ec_commands.h
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* CrOS EC / MFD / IIO
- Contains tag-ib-chrome-mfd-iio-input-5.5, which is the first part of a
series from Gwendal to refactor sensor code between MFD, CrOS EC, iio
and input in order to add a new sensorhub driver and FIFO processing
* Wilco EC:
- Add support for Dell's USB PowerShare policy control, keyboard
backlight LED driver, and a new test_event file.
- Fixes use after free in wilco_ec's telemetry driver.
* Misc:
- bugfix in cros_usbpd_logger (missing destroy workqueue).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXeaqtwAKCRBzbaomhzOw
wilIAQCQ3/dpAwg2skKYYf3RBLDJeDLA1id7rNSgMOXc2aKyTAD/fCQtNhwj+Hal
W//04WWngTCQF5fkE9OCJrDwbm5eRwc=
=uOGe
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform changes from Benson Leung:
"CrOS EC / MFD / IIO:
- Contains tag-ib-chrome-mfd-iio-input-5.5, which is the first part
of a series from Gwendal to refactor sensor code between MFD, CrOS
EC, iio and input in order to add a new sensorhub driver and FIFO
processing
Wilco EC:
- Add support for Dell's USB PowerShare policy control, keyboard
backlight LED driver, and a new test_event file.
- Fixes use after free in wilco_ec's telemetry driver.
Misc:
- bugfix in cros_usbpd_logger (missing destroy workqueue)"
* tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: wilco_ec: fix use after free issue
platform/chrome: cros_ec: Add Kconfig default for cros-ec-sensorhub
Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
Revert "Input: cros_ec_keyb - add back missing mask for event_type"
platform/chrome: cros_ec: handle MKBP more events flag
platform/chrome: cros_ec: Do not attempt to register a non-positive IRQ number
platform/chrome: cros-ec: Record event timestamp in the hard irq
mfd / platform / iio: cros_ec: Register sensor through sensorhub
iio / platform: cros_ec: Add cros-ec-sensorhub driver
mfd / platform: cros_ec: Add sensor_count and make check_features public
platform/chrome: cros_ec: Put docs with the code
platform/chrome: cros_usbpd_logger: add missed destroy_workqueue in remove
platform/chrome: cros_ec: Fix Kconfig indentation
platform/chrome: wilco_ec: Add keyboard backlight LED support
platform/chrome: wilco_ec: Add charging config driver
platform/chrome: wilco_ec: Add Dell's USB PowerShare Policy control
platform/chrome: wilco_ec: Add debugfs test_event file
This is caused by dereferencing 'dev_data' after put_device() in
the telem_device_remove() function.
This patch just moves the put_device() down a bit to avoid this
issue.
Fixes: 1210d1e6ba ("platform/chrome: wilco_ec: Add telemetry char device interface")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Nick Crews <ncrews@chromium.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Like the other CrOS EC sub-drivers set that depends on his parent and
set default to the parent's value.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The ChromeOS EC has support for signaling to the host that a single IRQ
can serve multiple MKBP (Matrix KeyBoard Protocol) events.
Doing this serves an optimization purpose, as it minimizes the number of
round-trips into the interrupt handling machinery, and it proves
beneficial to sensor timestamping as it keeps the desired synchronization
of event times between the two processors.
This patch adds kernel support for this EC feature, allowing the ec_irq
to loop until all events have been served.
Signed-off-by: Enrico Granata <egranata@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add a layer of sanity checking to cros_ec_register against attempting to
register IRQ values that are not strictly greater than 0.
Signed-off-by: Enrico Granata <egranata@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To improve sensor timestamp precision, given EC and AP are in different
time domains, the AP needs to try to record the exact moment an event
was signalled to the AP by the EC as soon as possible after it happens.
First thing in the hard irq is the best place for this.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Similar to HID sensor stack, the new driver sits between cros-ec-dev
and the IIO device drivers:
The EC based IIO device topology would be:
iio:device1 ->
...0/0000:00:1f.0/PNP0C09:00/GOOG0004:00/cros-ec-dev.6.auto/
cros-ec-sensorhub.7.auto/
cros-ec-accel.15.auto/
iio:device1
It will be expanded to control EC sensor FIFO.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[Fix "unknown type name 'uint32_t'" type errors]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add a new function to return the number of MEMS sensors available in a
ChromeOS Embedded Controller. It uses MOTIONSENSE_CMD_DUMP if available
or a specific memory map ACPI registers to find out.
Also, make check_features public as it can be useful for other drivers
to know what the Embedded Controller supports.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To avoid doc rot, put function documentations with code, not header.
Use kernel-doc style comments for exported functions.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The driver forgets to destroy workqueue in remove.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The EC is in charge of controlling the keyboard backlight on
the Wilco platform. We expose a standard LED class device
named platform::kbd_backlight.
Since the EC will never change the backlight level of its own accord,
we don't need to implement a brightness_get() method.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add a device to control the charging algorithm used on Wilco devices,
which will be picked up by the drivers/power/supply/wilco-charger.c
driver. See Documentation/ABI/testing/sysfs-class-power-wilco for the
userspace interface and other info.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
1. Get EC codec's capabilities.
2. Get and set SHM address if any.
3. Transmit language model to EC codec if needed.
4. Start to read audio data from EC codec if receives host event.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20191019143504.1.I5388b69a7a9c551078fed216a77440cee6dedf49@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor by the following items:
- reformat copyright declaration
- use more specific name "i2s rx"
- use verbose symbol names to separate namespaces
- make some short functions inline
- remove unused TDM-related code
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-By: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20191014180059.02.I43373b9a66dbb70196b3f216b3aa86111c410836@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
USB PowerShare is a policy which affects charging via the special
USB PowerShare port (marked with a small lightning bolt or battery icon)
when in low power states:
- In S0, the port will always provide power.
- In S0ix, if usb_charge is enabled, then power will be supplied to
the port when on AC or if battery is > 50%. Else no power is supplied.
- In S5, if usb_charge is enabled, then power will be supplied to
the port when on AC. Else no power is supplied.
Signed-off-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This change introduces a new debugfs file 'test_event' that when written
to causes the EC to generate a test event.
This adds a second sub cmd for the test event, and pulls out send_ec_cmd
to be a common helper between h1_gpio_get and test_event_set.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
In cros_usbpd_logger_probe the return value of
create_singlethread_workqueue may be null, it should be checked.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Allow to poll on the cros_ec device to receive the MKBP events.
The /dev/cros_[ec|fp|..] file operations now implements the poll
operation. The userspace can now receive specific MKBP events by doing
the following:
- Open the /dev/cros_XX file.
- Call the CROS_EC_DEV_IOCEVENTMASK ioctl with the bitmap of the MKBP
events it wishes to receive as argument.
- Poll on the file descriptor.
- When it gets POLLIN, do a read on the file descriptor, the first
queued event will be returned (using the struct
ec_response_get_next_event format: one byte of event type, then
the payload).
The read() operation returns at most one event even if there are several
queued, and it might be truncated if the buffer is smaller than the
event (but the caller should know the maximum size of the events it is
reading).
read() used to return the EC version string, it still does it when no
event mask or an empty event is set for backward compatibility (despite
nobody really using this feature).
This will be used, for example, by the userspace daemon to receive and
treat the EC_MKBP_EVENT_FINGERPRINT sent by the FP MCU.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Since the rpmsg_endpoint is created before probe is called, it's
possible that a host event is received during cros_ec_register, and
there would be some pending work in the host_event_work workqueue while
cros_ec_register is called.
If cros_ec_register fails, when the leftover work in host_event_work
run, the ec_dev from the drvdata of the rpdev could be already set to
NULL, causing kernel crash when trying to run cros_ec_get_next_event.
Fix this by creating the rpmsg_endpoint by ourself, and when
cros_ec_register fails (or on remove), destroy the endpoint first (to
make sure there's no more new calls to cros_ec_rpmsg_callback), and then
cancel all works in the host_event_work workqueue.
Cc: stable@vger.kernel.org
Fixes: 2de89fd989 ("platform/chrome: cros_ec: Add EC host command support using rpmsg")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Mark chromeos_tbmc as wake capable and report wake events. This helps to
abort suspend on seeing a tablet mode switch event when kernel is
suspending. This also helps identifying if chromeos_tbmc is the wake
source.
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
-----BEGIN PGP SIGNATURE-----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=UcyY
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-extcon-hid-i2c-iio-input-media-chrome-power-pwm-rtc-sound-v5.4' into chrome-platform/for-next
Immutable branch between MFD, Extcon, HID, I2C, IIO, Input, Chrome, Power,
PWM, RTC and Sound to allow picking patches that depends on the series
that moves some code from the MFD subsystem to platform/chrome.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.
In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:
- Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
- Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
driver from include/linux/mfd/cros_ec.h to a new file
include/linux/platform_data/cros_ec_proto.h
- Update all the drivers with the new includes, so
- Drivers that only need to know about the protocol include
- linux/platform_data/cros_ec_proto.h
- linux/platform_data/cros_ec_commands.h
- Drivers that need to know about the cros-ec mfd device also include
- linux/mfd/cros_ec.h
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Series changes: 3
- Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The cros-ec-dev is a multifunction device that now doesn't implement any
chardev communication interface. MFD_CROS_EC_CHARDEV doesn't look
a good name to describe that device and can cause confusion. Hence
rename it to CROS_EC_DEV.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
That's a driver to talk with the ChromeOS Embedded Controller via a
miscellaneous character device, it creates an entry in /dev for every
instance and implements basic file operations for communicating with the
Embedded Controller with an userspace application. The API is moved to
the uapi folder, which is supposed to contain the user space API of the
kernel.
Note that this will replace current character device interface
implemented in the cros-ec-dev driver in the MFD subsystem. The idea is
to move all the functionality that extends the bounds of what MFD was
designed to platform/chrome subsystem.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Now, the ChromeOS EC core driver has nothing related to an MFD device, so
move that driver from the MFD subsystem to the platform/chrome subsystem.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
An MFD is a device that contains several sub-devices (cells). For instance,
the ChromeOS EC fits in this description as usually contains a charger and
can have other devices with different functions like a Real-Time Clock,
an Audio codec, a Real-Time Clock, ...
If you look at the driver, though, we're doing something odd. We have
two MFD cros-ec drivers where one of them (cros-ec-core) instantiates
another MFD driver as sub-driver (cros-ec-dev), and the latest
instantiates the different sub-devices (Real-Time Clock, Audio codec,
etc).
MFD
------------------------------------------
cros-ec-core
|___ mfd-cellA (cros-ec-dev)
| |__ mfd-cell0
| |__ mfd-cell1
| |__ ...
|
|___ mfd-cellB (cros-ec-dev)
|__ mfd-cell0
|__ mfd-cell1
|__ ...
The problem that was trying to solve is to describe some kind of topology for
the case where we have an EC (cros-ec) chained with another EC
(cros-pd). Apart from that this extends the bounds of what MFD was
designed to do we might be interested on have other kinds of topology that
can't be implemented in that way.
Let's prepare the code to move the cros-ec-core part from MFD to
platform/chrome as this is clearly a platform specific thing non-related
to a MFD device.
platform/chrome | MFD
------------------------------------------
|
cros-ec ________|___ cros-ec-dev
| |__ mfd-cell0
| |__ mfd-cell1
| |__ ...
|
cros-pd ________|___ cros-ec-dev
| |__ mfd-cell0
| |__ mfd-cell1
| |__ ...
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add EC host command to inform EC of AP suspend/resume status.
Signed-off-by: Yilun Lin <yllin@chromium.org>
Tested-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
No need to check the argument of i2c_unregister_device() and
property_entries_free() because the functions do check it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add the GET_BATT_PPID_INFO=0x8A command to the allowlist of accepted
telemetry commands. In addition, since this new command requires
verifying the contents of some of the arguments, I also restructure
the request to use a union of the argument structs. Also, zero out the
request buffer before each request, and change "whitelist" to
"allowlist".
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The SPI thingies request FIFO-99 by default, reduce this to FIFO-50.
FIFO-99 is the very highest priority available to SCHED_FIFO and
it not a suitable default; it would indicate the SPI work is the
most important work on the machine.
Cc: Benson Leung <bleung@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20190801111541.917256884@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Kernel crashes during suspend due to wrong conversion in
suspend and resume functions.
Use the proper helper to get ishtp_cl_device instance.
Cc: <stable@vger.kernel.org> # 5.2.x: b12bbdc5: HID: intel-ish-hid: fix wrong driver_data usage
Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* CrOS EC:
- Add new CrOS ISHTP transport protocol
- Add proper documentation for debugfs entries and expose resume and uptime files
- Select LPC transport protocol variant at runtime.
- Add lid angle sensor driver
- Fix oops on suspend/resume for lightbar driver
- Set CrOS SPI transport protol in realtime
* Wilco EC:
- Add telemetry char device interface
- Add support for event handling
- Add new sysfs attributes
* Misc:
- Contains ib-mfd-cros-v5.3 immutable branch from mfd, with cros_ec_commands.h
header freshly synced with Chrome OS's EC project.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXSbP3AAKCRBzbaomhzOw
wjoNAP4lrY3UboMaQklHLOCxPTFXwIHjImXxJUCrezJj4eBRcwEAz+adSNKieVEY
xNf/yetCkjVnQNMVjGaBJRUp3F+2LwQ=
=/Xj3
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung
"CrOS EC:
- Add new CrOS ISHTP transport protocol
- Add proper documentation for debugfs entries and expose resume and
uptime files
- Select LPC transport protocol variant at runtime.
- Add lid angle sensor driver
- Fix oops on suspend/resume for lightbar driver
- Set CrOS SPI transport protol in realtime
Wilco EC:
- Add telemetry char device interface
- Add support for event handling
- Add new sysfs attributes
Misc:
- Contains ib-mfd-cros-v5.3 immutable branch from mfd, with
cros_ec_commands.h header freshly synced with Chrome OS's EC
project"
* tag 'tag-chrome-platform-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (54 commits)
mfd / platform: cros_ec_debugfs: Expose resume result via debugfs
platform/chrome: lightbar: Get drvdata from parent in suspend/resume
iio: cros_ec: Add lid angle driver
platform/chrome: wilco_ec: Add circular buffer as event queue
platform/chrome: cros_ec_lpc_mec: Fix kernel-doc comment first line
platform/chrome: cros_ec_lpc: Choose Microchip EC at runtime
platform/chrome: cros_ec_lpc: Merge cros_ec_lpc and cros_ec_lpc_reg
Input: cros_ec_keyb: mask out extra flags in event_type
platform/chrome: wilco_ec: Fix unreleased lock in event_read()
platform/chrome: cros_ec_debugfs: cros_ec_uptime_fops can be static
platform/chrome: cros_ec_debugfs: Add debugfs ABI documentation
platform/chrome: cros_ec_debugfs: Fix kernel-doc comment first line
platform/chrome: cros_ec_debugfs: Add debugfs entry to retrieve EC uptime
mfd: cros_ec: Update I2S API
mfd: cros_ec: Add Management API entry points
mfd: cros_ec: Add SKU ID and Secure storage API
mfd: cros_ec: Add API for rwsig
mfd: cros_ec: Add API for Fingerprint support
mfd: cros_ec: Add API for Touchpad support
mfd: cros_ec: Add API for EC-EC communication
...
For ECs that support it, the EC returns the number of slp_s0
transitions and whether or not there was a timeout in the resume
response. Expose the last resume result to usermode via debugfs so
that usermode can detect and report S0ix timeouts.
Signed-off-by: Evan Green <evgreen@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The lightbar driver never assigned the drvdata in probe method, and
thus there is nothing there. Need to get the ec_dev from the parent's
drvdata.
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The current implementation of the event queue both
wastes space using a doubly linked list and isn't super
obvious in how it behaves. This converts the queue to an
actual circular buffer. The size of the queue is a
tunable module parameter. This also fixes a few other things:
- A memory leak that occurred when the ACPI device was
removed, but the events were not freed from the queue.
- Now kfree() the oldest event from outside all locks.
- Add newline to logging messages.
- Add helper macros to calculate size of events.
- Remove unneeded lock around a check for dev_data->exist
in hangup_device().
- Remove an unneeded null event pointer check in enqueue_events().
- Correct some comments.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
kernel-doc comments have a prescribed format. To be _particularly_ correct
we should also capitalise the brief description and terminate it with a
period.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Nick Crews <ncrews@chromium.org>
On many boards, communication between the kernel and the Embedded
Controller happens over an LPC bus. In these cases, the kernel config
CONFIG_CROS_EC_LPC is enabled. Some of these LPC boards contain a
Microchip Embedded Controller (MEC) that is different from the regular
EC. On these devices, the same LPC bus is used, but the protocol is
a little different. In these cases, the CONFIG_CROS_EC_LPC_MEC kernel
config is enabled. Currently, the kernel decides at compile-time whether
or not to use the MEC variant, and, when that kernel option is selected
it breaks the other boards. We would like a kind of runtime detection to
avoid this.
This patch adds that detection mechanism by probing the protocol at
runtime, first we assume that a MEC variant is connected, and if the
protocol fails it fallbacks to the regular EC. This adds a bit of
overload because we try to read twice on those LPC boards that doesn't
contain a MEC variant, but is a better solution than having to select the
EC variant at compile-time.
While here also fix the alignment in Kconfig file for this config option
replacing the spaces by tabs.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Nick Crews <ncrews@chromium.org>
Reviewed-by: Nick Crews <ncrews@chromium.org>
The cros_ec_lpc_reg files are only used by the cros_ec_lpc core and
there isn't logical separation between them. So, merge those files into
the cros_ec_lpc also allowing us to drop the header file used for the
interface between the two.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Nick Crews <ncrews@chromium.org>
When copying an event to userspace failed, the event queue
lock was never released. This fixes that.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
kernel-doc comments have a prescribed format. To be _particularly_
correct we should also capitalise the brief description and terminate
it with a period.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The new debugfs entry 'uptime' is being made available to userspace so that
a userspace daemon can synchronize EC logs with host time.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
[rework based on Tim's first approach]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Fix sparse warning:
drivers/platform/chrome/cros_ec_debugfs.c:256:30: warning: symbol 'cros_ec_console_log_fops' was not declared. Should it be static?
drivers/platform/chrome/cros_ec_debugfs.c:265:30: warning: symbol 'cros_ec_pdinfo_fops' was not declared. Should it be static?
drivers/platform/chrome/cros_ec_lightbar.c:550:24: warning: symbol 'cros_ec_lightbar_attr_group' was not declared. Should it be static?
drivers/platform/chrome/cros_ec_sysfs.c:338:24: warning: symbol 'cros_ec_attr_group' was not declared. Should it be static?
drivers/platform/chrome/cros_ec_vbc.c:104:24: warning: symbol 'cros_ec_vbc_attr_group' was not declared. Should it be static?
drivers/platform/chrome/cros_ec_lpc.c:408:25: warning: symbol 'cros_ec_lpc_pm_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add the ability to extract version information from the EC.
Example Output:
$ cd /sys/bus/platform/devices/GOOG000C:00
$ tail build_date build_revision version model_number
==> build_date <==
04/25/19
==> build_revision <==
d2592cae0
==> version <==
00.00.14
==> model_number <==
08B6
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The Wilco Embedded Controller is able to send telemetry data
which is useful for enterprise applications. A daemon running on
the OS sends a command to the EC via a write() to a char device,
and can read the response with a read(). The write() request is
verified by the driver to ensure that it is performing only one
of the whitelisted commands, and that no extraneous data is
being transmitted to the EC. The response is passed directly
back to the reader with no modification.
The character device will appear as /dev/wilco_telemN, where N
is some small non-negative integer, starting with 0. Only one
process may have the file descriptor open at a time. The calling
userspace program needs to keep the device file descriptor open
between the calls to write() and read() in order to preserve the
response. Up to 32 bytes will be available for reading.
For testing purposes, try requesting the EC's firmware build
date, by sending the WILCO_EC_TELEM_GET_VERSION command with
argument index=3. i.e. write [0x38, 0x00, 0x03]
to the device node. An ASCII string of the build date is
returned.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The Wilco Embedded Controller can create custom events that
are not handled as standard ACPI objects. These events can
contain information about changes in EC controlled features,
such as errors and events in the dock or display. For example,
an event is triggered if the dock is plugged into a display
incorrectly. These events are needed for telemetry and
diagnostics reasons, and for possibly alerting the user.
These events are triggered by the EC with an ACPI Notify(0x90),
and then the BIOS reads the event buffer from EC RAM via an
ACPI method. When the OS receives these events via ACPI,
it passes them along to this driver. The events are put into
a queue which can be read by a userspace daemon via a char device
that implements read() and poll(). The event queue acts as a
circular buffer of size 64, so if there are no userspace consumers
the kernel will not run out of memory. The char device will appear at
/dev/wilco_event{n}, where n is some small non-negative integer,
starting from 0. Standard ACPI events such as the battery getting
plugged/unplugged can also come through this path, but they are
dealt with via other paths, and are ignored here.
To test, you can tail the binary data with
$ cat /dev/wilco_event0 | hexdump -ve '1/1 "%x\n"'
and then create an event by plugging/unplugging the battery.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
All currently known ECs in the wild are very sensitive to timing.
Specifically the ECs are known to drop a transfer if more than 8 ms
passes from the assertion of the chip select until the transfer
finishes.
Let's use the new feature introduced in the patch (spi: Allow SPI
devices to request the pumping thread be realtime") to request the SPI
pumping thread be realtime. This means that if we get shunted off to
the SPI thread for whatever reason we won't get downgraded to low
priority.
NOTES:
- We still need to keep ourselves as high priority since the SPI core
doesn't guarantee that all transfers end up on the pumping thread
(in fact, it tries pretty hard to do them in the calling context).
- If future Chrome OS ECs ever fix themselves to be less sensitive
then we could consider adding a property (or compatible string) to
not set this property. For now we need it across the board.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 37a186225a ("platform/chrome: cros_ec_spi: Transfer
messages at high priority") we moved transfers to a high priority
workqueue. This helped make them much more reliable.
...but, we still saw failures.
We were actually finding ourselves competing for time with dm-crypt
which also scheduled work on HIGHPRI workqueues. While we can
consider reverting the change that made dm-crypt run its work at
HIGHPRI, the argument in commit a1b89132dc ("dm crypt: use
WQ_HIGHPRI for the IO and crypt workqueues") is somewhat compelling.
It does make sense for IO to be scheduled at a priority that's higher
than the default user priority. It also turns out that dm-crypt isn't
alone in using high priority like this. loop_prepare_queue() does
something similar for loopback devices.
Looking in more detail, it can be seen that the high priority
workqueue isn't actually that high of a priority. It runs at MIN_NICE
which is _fairly_ high priority but still below all real time
priority.
Should we move cros_ec_spi to real time priority to fix our problems,
or is this just escalating a priority war? I'll argue here that
cros_ec_spi _does_ belong at real time priority. Specifically
cros_ec_spi actually needs to run quickly for correctness. As I
understand this is exactly what real time priority is for.
There currently doesn't appear to be any way to use the standard
workqueue APIs with a real time priority, so we'll switch over to
using using a kthread worker. We'll match the priority that the SPI
core uses when it wants to do things on a realtime thread and just use
"MAX_RT_PRIO - 1".
This commit plus the patch ("platform/chrome: cros_ec_spi: Request the
SPI thread be realtime") are enough to get communications very close
to 100% reliable (the only known problem left is when serial console
is turned on, which isn't something that happens in shipping devices).
Specifically this test case now passes (tested on rk3288-veyron-jerry):
dd if=/dev/zero of=/var/log/foo.txt bs=4M count=512&
while true; do
ectool version > /dev/null;
done
It should be noted that "/var/log" is encrypted (and goes through
dm-crypt) and also passes through a loopback device.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This driver implements a slim layer to enable the ChromeOS
EC kernel stack (cros_ec) to communicate with ChromeOS EC
firmware running on the Intel Integrated Sensor Hub (ISH).
The driver registers a ChromeOS EC MFD device to connect
with cros_ec kernel stack (upper layer), and it registers a
client with the ISH Transport Protocol bus (lower layer) to
talk with the ISH firwmare. See description of the ISHTP
protocol at Documentation/hid/intel-ish-hid.txt
Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Tested-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Azhar Shaikh