Commit Graph

824840 Commits

Author SHA1 Message Date
Giridhar Malavali 711a08d79f scsi: qla2xxx: Change abort wait_loop from msleep to wait_event_timeout
This patch converts driver wait time from using msleep to
wair_event_timeout to prevent race condition.

Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:45:59 -04:00
Giridhar Malavali b2d1453a45 scsi: qla2xxx: Fix driver unload when FC-NVMe LUNs are connected
This patch allows driver to unload using "modprobe -r" when FC-NVMe LUNs
are connected.

Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:45:58 -04:00
Anil Gurumurthy e39a6645d9 scsi: qla2xxx: Cleanup redundant qla2x00_abort_all_cmds during unload
This patch removes redundant qla2x00_abort_all_cmds() during driver unload.

Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:45:58 -04:00
Giridhar Malavali ffc81fc07e scsi: qla2xxx: Set remote port devloss timeout to 0
This patch sets remote_port_devloss value to 0. This indicates to FC-NVMe
transport that driver is unloading and transport should not retry.

Fixes: e476fe8af5 ("scsi: qla2xxx: Fix unload when NVMe devices are configured")
Cc: stable@vger.kernel.org
Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:45:58 -04:00
Quinn Tran ffbc647666 scsi: qla2xxx: Cleanup fcport memory to prevent leak
Clean up fcport list and loopid in one place and iterate through for loop.

Signed-off-by: Quinn Tran <qtran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:45:58 -04:00
Quinn Tran a6b95d1c71 scsi: qla2xxx: Use mutex protection during qla2x00_sysfs_read_fw_dump()
Add mutex protection to prevent driver from freeing the FW dump buffer
while the extraction is in progress.

[mkp: commit desc]

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:45:58 -04:00
Quinn Tran a4226ec3ef scsi: qla2xxx: Fix fw dump corruption
If fw dump buffer size changes and there is an existing fw dump, then save
the old dump in the newly allocated buffer.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:45:58 -04:00
Andrew Vasquez e81d1bcbde scsi: qla2xxx: Further limit FLASH region write access from SysFS
Recent ISPs have larger and more complex flash-write semantics
(secure-access and signing). The BSG interfaces support these semantics for
all ISPs and is exclusively used by QLogic user-space tools. Limit
flash-write operations to ISPs <= 25xx.

Signed-off-by: Andrew Vasquez <andrewv@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:45:58 -04:00
Andrew Vasquez 5cbdae10bf scsi: qla2xxx: Fix incorrect region-size setting in optrom SYSFS routines
Commit e6f77540c0 ("scsi: qla2xxx: Fix an integer overflow in sysfs
code") incorrectly set 'optrom_region_size' to 'start+size', which can
overflow option-rom boundaries when 'start' is non-zero.  Continue setting
optrom_region_size to the proper adjusted value of 'size'.

Fixes: e6f77540c0 ("scsi: qla2xxx: Fix an integer overflow in sysfs code")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Vasquez <andrewv@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:45:53 -04:00
Giridhar Malavali 5da05a26b8 scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe
With FC-NVMe enabled, driver does not support T10 DIF/DIX.  This patch
disables T10-PI information when ql2xnvmeenable is set.

Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:36 -04:00
Giridhar Malavali 6b1f44466d scsi: qla2xxx: Increase the max_sgl_segments to 1024
This patch increases max_sgl_segments value from 128 to the maximum
supported which is 1024. Increasing max_sgl_segments will allow the driver
to support larger I/O sizes

[mkp: commit desc tweak]

Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:36 -04:00
Giridhar Malavali 0257eda08e scsi: qla2xxx: Reset the FCF_ASYNC_{SENT|ACTIVE} flags
Driver maintains state machine for processing and completing switch
commands. This patch resets FCF_ASYNC_{SENT|ACTIVE} flag to indicate if the
previous command is active or sent, in order for next GPSC command to
advance the state machine.

[mkp: commit desc typo]

Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:36 -04:00
Giridhar Malavali ae6ccb0f81 scsi: qla2xxx: Set the qpair in SRB to NULL when SRB is released
This patch sets QPair pointer to NULL to prevent abort command racing ahead
of normal command completion handling during scsi_done call.

Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:36 -04:00
Giridhar Malavali 740e29358e scsi: qla2xxx: Set the SCSI command result before calling the command done
This patch tries to address race condition between abort handler and
completion handler. When scsi command result is set by both abort and
completion handler, scsi_done() is only called after refcount on SRB
structure goes to zero. The abort handler sets this result prematurely even
when the refcount is non-zero value. Fix this by setting SCSI cmd->result
before scsi_done() is called.

Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:36 -04:00
Bart Van Assche d6d189ceab scsi: lpfc: Change smp_processor_id() into raw_smp_processor_id()
This patch avoids that a kernel warning appears when smp_processor_id() is
called with preempt debugging enabled.

Cc: James Smart <james.smart@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:36 -04:00
Bart Van Assche d8c2040bf9 scsi: lpfc: Remove unused functions
Remove those functions that are not called from outside the removed
functions.

Cc: James Smart <james.smart@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:36 -04:00
Bart Van Assche b27cbd5549 scsi: lpfc: Remove set-but-not-used variables
This patch does not change any functionality but avoids that the compiler
complains about set-but-not-used variables when building with W=1.

Cc: James Smart <james.smart@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:36 -04:00
Bart Van Assche a73cb81492 scsi: lpfc: Move trunk_errmsg[] from a header file into a .c file
Arrays should be defined in .c files instead of in a header file. This
patch reduces the size of the lpfc kernel module.

Cc: James Smart <james.smart@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:36 -04:00
Bart Van Assche cd05c155d7 scsi: lpfc: Annotate switch/case fall-through
This patch avoids that the compiler warns about missing fall-through
annotation when building with W=1.

Cc: James Smart <james.smart@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:35 -04:00
Bart Van Assche ffd43814d9 scsi: lpfc: Fix indentation and balance braces
This patch avoid that smatch complains about misleading indentation.

Cc: James Smart <james.smart@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:35 -04:00
Bart Van Assche 3999df75bc scsi: lpfc: Declare local functions static
This patch avoids that the compiler complains about missing declarations
when building with W=1.

Cc: James Smart <james.smart@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:35 -04:00
Stanley Chu 94e424c6b6 scsi: ufs: Remove "<name>-fixed-regulator" device tree property
"<name>-fixed-regulator" device tree property can be safely removed because
below things are fixed or resolved,

1. "<name>-max-microamp" becomes optional property: Undefined
   "<name>-max-microamp" will not cause initialization fail if
   "<name>-fixed-regulator" is not defined.

2. Current switching operation (by regulator_set_load) now has rules:
   Regulators will have undefined current limit if "<name>-fixed-regulator"
   is not defined. But this is safe because only regulator which has
   configured current limit from "<name>-max-microamp" property is allowed
   to change its load.

Although "<name>-fixed-regulator" is not used in any dt-bindings in tree,
this patch is still safe for regulators already defined
"<name>-fixed-regulator". To be more clear, if a regulator defined
"<name>-fixed-regulator" before, the behavior difference after this patch
is,

1. "<name>-max-microamp":
   If a regulator defined "<name>-fixed-regulator", it is not necessary
   to define "<name>-max-microamp" property in device tree and it is
   expected to have an undefined current limit, i.e., "max_uA" field
   is zero in struct ufs_vreg. This is exactly the same as patched.

2. "vcc-supply-1p8" or volatge range settings:
   * For vcc, vccq or vccq2, these three regulators shall not define
     "<name>-fixed-regulator" because defining it will lead to
     undefined voltage range and thus voltage switching will be
     unexpected.
   * For other regulators with undefined voltage range, voltage range
     will be still undefined after patched.

Therefore this patch is safe for all existed regulators with
"<name>-fixed-regulator" property already defined.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:35 -04:00
Stanley Chu 12e3ffb932 scsi: ufs: Change "<name>-max-microamp" to non-mandatory property
In dt-bindings for ufs, "<name>-max-microamp" property indicates current
limit and is mandatory if "<name>-fixed-regulator" is not defined on a
specified regulator.

However, in some platforms, regulators without "<name>-fixed-regulator"
property may not need to define their current limit because they may want
to define voltage range only for proper voltage switching in different
power modes, especially for vcc, vccq or vccq2.

Currently missing "<name>-max-microamp" property in device tree will lead
initialization to fail, thus such limitation shall be resolved to tolerate
this kind of regulators.

After resolving this, regulators without "<name>-max-microamp" property
will have undefined "max current" value, i.e., zero value in "max_uA" field
in struct ufs_vreg. Because we do bypass current switching operation (by
regulator_set_load) in case of undefined current limit, this patch shall be
safe.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:35 -04:00
Stanley Chu 0487fff766 scsi: ufs: Fix regulator load and icc-level configuration
Currently if a regulator has "<name>-fixed-regulator" property in device
tree, it will skip current limit initialization.  This lead to a zero
"max_uA" value in struct ufs_vreg.

However, "regulator_set_load" operation shall be required on regulators
which have valid current limits, otherwise a zero "max_uA" set by
"regulator_set_load" may cause unexpected behavior when this regulator is
enabled or set as high power mode.

Similarly, in device's icc_level configuration flow, the target icc_level
shall be updated if regulator also has valid current limit, otherwise a
wrong icc_level will be calculated by zero "max_uA" and thus causes
unexpected results after it is written to device.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:35 -04:00
Stanley Chu 3b141e8cfd scsi: ufs: Avoid configuring regulator with undefined voltage range
For regulators used by UFS, vcc, vccq and vccq2 will have voltage range
initialized by ufshcd_populate_vreg(), however other regulators may have
undefined voltage range if dt-bindings have no such definition.

In above undefined case, both "min_uV" and "max_uV" fields in ufs_vreg
struct will be zero values and these values will be configured on
regulators in different power modes.

Currently this may have no harm if both "min_uV" and "max_uV" always keep
"zero values" because regulator_set_voltage() will always bypass such
invalid values and return "good" results.

However improper values shall be fixed to avoid potential bugs.  Simply
bypass voltage configuration if voltage range is not defined.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:35 -04:00
Stanley Chu e040362c57 scsi: ufs: Remove unused min_uA field in struct ufs_vreg
There are two fields related to regulator current limit in struct ufs_vreg:
"min_uA" and "max_uA".

"max_uA" is probed by "<name>-max-microamp" property from device tree and
used for

 - regulator_set_load operations
 - icc_level configuration in device

However "min_uA" field is not used anywhere, thus we can remove it.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:35 -04:00
Ding Xiang 9e29a682c6 scsi: bnx2fc: remove unneeded variable
The rc variable is not needed in bnx2fc_abts_cleanup(). Remove it and
just return SUCCESS.

[mkp: commit desc]

Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03 23:11:35 -04:00
Saurav Kashyap fb17358ce8 scsi: qedf: Update the driver version to 8.37.25.19
- Update the driver version.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Saurav Kashyap efc8fe9b6c scsi: qedf: Fix lport may be used uninitialized warning
- lport was getting used without initialization, initialize it to fix a
   warning.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Saurav Kashyap fe2043d19e scsi: qedf: Correctly handle refcounting of rdata
- Handle refcount of rdata during error conditions.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Shyam Sundar faea5719d3 scsi: qedf: Cleanup rrq_work after QEDF_CMD_OUTSTANDING is cleared
Here is the relevant logs for the problem we are solving:

qedf_flush_active_ios:1707]:3: Flush active i/o's num=0x17 fcport=0xffff948168fbcc80 port_id=0x550200 scsi_id=0.
qedf_flush_active_ios:1708]:3: Locking flush mutex.
qedf_flush_active_ios:1758]:3: Not outstanding, xid=0xaaf, cmd_type=3 refcount=1.
qedf_flush_active_ios:1896]:3: Flushed 0x16 I/Os, active=0x1.
qedf_flush_active_ios:1901]:3: Flushed 0x16 I/Os, active=0x1 cnt=60.
qedf_send_rrq:295]:3: Sending RRQ orig io = ffffb48b8f7d7158, orig_xid = 0xaaf
qedf_initiate_els:37]:3: Sending ELS
qedf_initiate_els:68]:3: initiate_els els_req = 0xffffb48b8f6d3098 cb_arg = ffff948fd5e4de80 xid = 4c6
qedf_init_mp_req:2172]:3: Entered.
qedf_init_mp_task:727]:3: Initializing MP task for cmd_type=4
qedf_initiate_els:134]:3: Ringing doorbell for ELS req
qedf_flush_active_ios:1901]:3: Flushed 0x16 I/Os, active=0x2 cnt=20.
qedf_cmd_timeout:96]:3: ELS timeout, xid=0x4c6.
qedf_rrq_compl:186]:3: Entered.
qedf_rrq_compl:204]:3: rrq_compl: orig io = ffffb48b8f7d7158, orig xid = 0xaaf, rrq_xid = 0x4c6, refcount=1
qedf_flush_active_ios:1935]:3: Unlocking flush mutex.
qedf_upload_connection:1579]:3: Uploading connection port_id=550200.

We found an ABTS command for which CMD_OUTSTANDING was cleared (line 3).
For this command, delayed send_rrq was queued, but would take 10 secs to
execute.  Adding capability to detect that (based on io_req->state that is
being introduced), and attempt to cancel rrq_work. If we succeed, we drop
the reference and free the io_req. If we cannot, then the els will get sent
out and we will wait for 10 secs for it to complete.

Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Saurav Kashyap f2c98af4a2 scsi: qedf: Check for tm_flags instead of cmd_type during cleanup
cmd_type is over written to QEDF_CLEANUP during cleanup, so check for
tm_flags.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Shyam Sundar feac47f507 scsi: qedf: Add a flag to help debugging io_req which could not be cleaned
- The flag will help in to figure out if io_req is cleaned or not.

Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Saurav Kashyap 582a47274a scsi: qedf: Don't send ABTS for under run scenario
- Command is already completed with underrun so no need to send ABTS.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Shyam Sundar ff543e2886 scsi: qedf: Don't queue anything if upload is in progress
- I/Os, aborts and tmf should not be queued if flush is in progress.

Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Chad Dupuis fc37ddce93 scsi: qedf: Check both the FCF and fabric ID before servicing clear virtual link
- Check proper values before servicing CVL.

Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Hannes Reinecke 56efc304b1 scsi: qedf: fc_rport_priv reference counting fixes
The fc_rport_priv structure is reference counted, so we need to ensure that
the reference is increased before accessing the structure.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Chad Dupuis 6f15d0c029 scsi: qedf: Add missing return in qedf_scsi_done()
On completions where we do not have a bad scsi_cmnd pointer we should
return before the the label lest we do a double kref_put.

Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:53 -04:00
Chad Dupuis a66c6cd2a8 scsi: qedf: Wait for upload and link down processing during soft ctx reset
- Wait for all the connections to get uploaded.

Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Chad Dupuis 627cc7dd73 scsi: qedf: Add additional checks for io_req->sc_cmd validity
- Check the validity of various pointers before processing.

Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Hannes Reinecke 78a8ab3cc0 scsi: qedf: fixup bit operations
test_bit() is atomic, test_bit() || test_bit() is not. So protect
consecutive bit tests with a lock to avoid races.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Hannes Reinecke 6d1368e8f9 scsi: qedf: fixup locking in qedf_restart_rport()
fc_rport_create() needs to be called with disc_mutex held.  And we should
re-assign the 'rdata' pointer in case it got changed.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Hannes Reinecke 4262d35c32 scsi: qedf: missing kref_put in qedf_xmit()
qedf_xmit() calls fc_rport_lookup(), but discards the returned rdata
structure almost immediately without decreasing the refcount.  This leads
to a refcount leak and the rdata never to be freed.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Saurav Kashyap 76dbf4ff06 scsi: qedf: Check for link state before processing LL2 packets and send fipvlan retries
- Check if link is UP before sending and processing any packets on wire.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Chad Dupuis 0cbd007539 scsi: qedf: Add missing fc_disc_init call after allocating lport
When receiving an unsolicited frame we could crash on a list traversal in
fc_rport_lookup while searching the rport which is associated with our
lport.

Initialize the lport's discovery node after allocating the lport in
__qedf_probe().

Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Andrew Vasquez 90ccf75798 scsi: qedf: Correct the memory barriers in qedf_ring_doorbell
- Correct memory barriers to make sure all cmnds are flushed.

Signed-off-by: Andrew Vasquez <andrewv@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Chad Dupuis 96b1765a09 scsi: qedf: Use a separate completion for cleanup commands
- If a TMF and cleanup are issued at the same time they could cause a call
   trace if issued against the same xid as the io_req->tm_done completion
   is used for both.

 - Set and clear cleanup bit in cleanup routine.

Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Saurav Kashyap 69ef2c6925 scsi: qedf: Modify abort and tmf handler to handle edge condition and flush
An I/O can be in any state when flush is called, it can be in abort,
waiting for abort, RRQ send and waiting or TMF send.

 - HZ can be different on different architecture, correctly set abort
   timeout value.

 - Flush can complete the I/Os prematurely, handle refcount for aborted
   I/Os and for which RRQ is pending.

 - Differentiate LUN/TARGET reset, as cleanup needs to be send to firmware
   accordingly.

 - Add flush mutex to sync cleanup call from abort and flush routine.

 - Clear abort/outstanding bit on timeout.

Signed-off-by: Shyam Sundar <shyam.sundar@marvell.com>
Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Shyam Sundar 5d5e55659b scsi: qedf: Modify flush routine to handle all I/Os and TMF
The purpose of flush routine is to cleanup I/Os to the firmware and
complete them to scsi middle layer. This routine is invoked before
connection is uploaded because of rport going away.

 - Don't process any I/Os, aborts, TMFs coming when flush in progress.

 - Add flags to handle cleanup and release of I/Os because flush can
   prematurely complete I/Os.

 - Original command can get completed to driver when cleanup for same is
   posted to firmware, handle this condition.

 - Modify flush to handle I/Os in all the states like abort, TMF, RRQ and
   timeouts.

Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:52 -04:00
Chad Dupuis 3e2c11b3fb scsi: qedf: Simplify s/g list mapping
When mapping the pages from a scatter/gather list from the SCSI layer we
only need to follow these rules:

 - Max SGEs for each I/O request is 256
 - No size limit on each SGE
 - No need to split OS provided SGEs to 4K before sending to firmware.
 - Slow SGE is applicable only when:
   - There are > 8 SGEs and any middle SGE is less than a page size (4K)

Make necessary changes so that driver follows these rules. Applicable only
for Write requests (not for Read requests). No need to check SGE address
alignment requirements (first, middle or last) before declaring slow SGE.

Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27 21:54:51 -04:00