In the exception return path, for both U/K cases, intr are already
disabled (for various existing reasons). So when we drop down to
@restore_regs, we need not redo that.
There was subtle issue - when intr were NOT being disabled for
ret-to-kernel-but-no-preemption case - now fixed by moving the
IRQ_DISABLE further up in @resume_kernel_mode.
So what do we gain:
* Shaves off a few insn in return path.
* Eliminates the need for IRQ_DISABLE_SAVE assembler macro for ARCv2
hence allows for entry code sharing.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
After the recent cleanups, all the exception handlers now have same
boilerplate prologue code. Move that into common macro.
This reduces readability but helps greatly with sharing / duplicating
entry code with ARCv2 ISA where the handlers are pretty much the same,
just the entry prologue is different (due to hardware assist).
Also while at it, add the missing FAKE_RET_FROM_EXCPN calls in couple of
places to drop down to pure kernel mode (from exception mode) before
jumping off into "C" code.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
With ECR now part of pt_regs
* No need to propagate from lowest asm handlers as arg
* No need to save it in tsk->thread.cause_code
* Avoid bit chopping to access the bit-fields
More code consolidation, cleanup
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
pt_regs->event was set with artificial values to identify the low level
system event (syscall trap / breakpoint trap / exceptions / interrupts)
With r8 saving out of the way, the full word can be used to save real
ECR (Exception Cause Register) which helps idenify the event naturally,
including additional info such as cause code, param.
Only for Interrupts, where ECR is not applicable, do we resort to
synthetic non ECR values.
SAVE_ALL_TRAP/EXCEPTIONS can now be merged as they both use ECR with
different runtime values.
The ptrace helpers now use the sub-fields of ECR to distinguish the
events (e.g. vector 0x25 is trap, param 0 is syscall...)
The following benefits will follow:
(1) This centralizes the location of where ECR is saved and will allow
the cleanup of task->thread.cause_code ECR placeholder which is set
in non-uniform way. Then ARC VM code can safely rely on it being
there for purpose of finer grained VM_EXEC dcache flush (based on
exec fault: I-TLB Miss)
(2) Further, ECR being passed around from low level handlers as arg can
be eliminated as it is part of standard reg-file in pt_regs
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
(This is a VERY IMP change for low level interrupt/exception handling)
-----------------------------------------------------------------------
WHAT
-----------------------------------------------------------------------
* User 25 now saved in pt_regs->user_r25 (vs. tsk->thread_info.user_r25)
* This allows Low level interrupt code to unconditionally save r25
(vs. the prev version which would only do it for U->K transition).
Ofcourse for nested interrupts, only the pt_regs->user_r25 of
bottom-most frame is useful.
* simplifies the interrupt prologue/epilogue
* Needed for ARCv2 ISA code and done here to keep design similar with
ARCompact event handling
-----------------------------------------------------------------------
WHY
-------------------------------------------------------------------------
With CONFIG_ARC_CURR_IN_REG, r25 is used to cache "current" task pointer
in kernel mode. So when entering kernel mode from User Mode
- user r25 is specially safe-kept (it being a callee reg is NOT part of
pt_regs which are saved by default on each interrupt/trap/exception)
- r25 loaded with current task pointer.
Further, if interrupt was taken in kernel mode, this is skipped since we
know that r25 already has valid "current" pointer.
With 2 level of interrupts in ARCompact ISA, detecting this is difficult
but still possible, since we could be in kernel mode but r25 not already saved
(in fact the stack itself might not have been switched).
A. User mode
B. L1 IRQ taken
C. L2 IRQ taken (while on 1st line of L1 ISR)
So in #C, although in kernel mode, r25 not saved (infact SP not
switched at all)
Given that ARcompact has manual stack switching, we could use a bit of
trickey - The low level code would make sure that SP is only set to kernel
mode value at the very end (after saving r25). So a non kernel mode SP,
even if in kernel mode, meant r25 was NOT saved.
The same paradigm won't work in ARCv2 ISA since SP is auto-switched so
it's setting can't be delayed/constrained.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This can be ascertained within do_page_fault() since it gets the full
ECR (Exception Cause Register).
Further, for both the callers of do_page_fault(): Prot-V / D-TLB-Miss,
the cause sub-fields in ECR are same for same type of access, making the
code much more simpler.
D-TLB-Miss [LD] 0x00_21_01_00
Prot-V [LD] 0x00_23_01_00
^^
D-TLB-Miss [ST] 0x00_21_02_00
Prot-V [ST] 0x00_23_02_00
^^
D-TLB-Miss [EX] 0x00_21_03_00
Prot-V [EX] 0x00_23_03_00
^^
This helps code consolidation, which is even better when moving code from
assembler to "C".
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The fixup code correctly updates the callee-regs on stack, but
fails to unwind it into actual register file. Thus userspace won't see
the update.
Reported-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
If CONFIG_ARC_MISALIGN_ACCESS is not enabled, or if the fixup fails,
call the same error handler: same signal/si_code to user (SIGBUS)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
orig_r8_IS_EXCPN and orig_r8_IS_BRKPT were same values due to a
copy/paste error. Although it looks bad and is wrong, it really doesn't
affect gdb working.
orig_r8_IS_BRKPT is the one relevant to debugging (breakpoints), since
it is used to provide EFA vs. ERET to a ptrace "stop_pc" request.
So when gdb has inserted a breakpoint, orig_r8_IS_BRKPT is already set,
and anything else (i.e. orig_r8_IS_EXCPN) becoming same as it, really
doesn't hurt gdb. The corollary case, could be nasty but nobody uses the
ptrace "stop_pc" request in that case
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Syscall restarting fixes made pt_regs->orig_r8 a short word, which was
not reflected in the assembler code - thus could potentially break gdb
debugging.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* Includes mapping of CCMs in address space
* Annotations to move arbitrary code/data into CCM
* Moving some of the critical code/data into CCM
* Runtime detection/reporting
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
ARC700 doesn't natively support unaligned access, but can be emulated
-Unaligned Access Exception
-Disassembly at the Fault address to find the exact insn (long/short)
Also per Arnd's comment, we runtime control it using 2 sysctl knobs:
* SYSCTL_ARCH_UNALIGN_ALLOW: Runtime enable/disble
* SYSCTL_ARCH_UNALIGN_NO_WARN: Warn on each emulation attempt
Originally contributed by Tim Yao <tim.yao@amlogic.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Tim Yao <tim.yao@amlogic.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
-Originally written by Rajeshwar Ranga
-Derived off of generic unwinder in 2.6.19 and adapted to ARC
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com>
ARC common code to enable a SMP system + ISS provided SMP extensions.
ARC700 natively lacks SMP support, hence some of the core features are
are only enabled if SoCs have the necessary h/w pixie-dust. This
includes:
-Inter Processor Interrupts (IPI)
-Cache coherency
-load-locked/store-conditional
...
The low level exception handling would be completely broken in SMP
because we don't have hardware assisted stack switching. Thus a fair bit
of this code is repurposing the MMU_SCRATCH reg for event handler
prologues to keep them re-entrant.
Many thanks to Rajeshwar Ranga for his initial "major" contributions to
SMP Port (back in 2008), and to Noam Camus and Gilad Ben-Yossef for help
with resurrecting that in 3.2 kernel (2012).
Note that this platform code is again singleton design pattern - so
multiple SMP platforms won't build at the moment - this deficiency is
addressed in subsequent patches within this series.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
There is a bit of hack/kludge right now where we disable preemption if a
L2 (High prio) IRQ is taken while L1 (Low prio) is active.
Need to revisit this
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
To avoid multiple syscall restarts (multiple signals) or no restart at
all (sigreturn), we need just an extra bit of state "literally 1 bit" in
struct pt_regs. orig_r8 is the best place to do this, however given the
way it is encoded currently, we can't add anything simplistically.
Current orig_r8:
* syscalls -> 1 to NR_SYSCALLS
* Exceptions -> NR_SYSCALLS + 1
* Break-point-> NR_SYSCALLS + 2
In new scheme it is a bit-field
* lower short word contains the exact event type (and a new bit to represent
restart semantics : if syscall was already / can't be restarted)
* upper short word optionally containing the syscall num - needed by
likes of tracehooks etc
This patch only changes how orig_r8 is organised and nothing should
change behaviourily.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Includes following fixes courtesy review by Al-Viro
* Tracer poke to Callee-regs were lost
Before going off into do_signal( ) we save the user-mode callee regs
(as they are not saved by default as part of pt_regs). This is to make
sure that that a Tracer (if tracing related signal) is able to do likes
of PEEKUSR(callee-reg).
However in return path we were simply discarding the user-mode callee
regs, which would break a POKEUSR(callee-reg) from a tracer.
* Issue related to multiple syscall restarts are addressed in next patch
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Jonas Bonn <jonas@southpole.se>
This includes support for generic clone/for/vfork/execve
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Vineet Gupta