Commit Graph

11 Commits

Author SHA1 Message Date
Ian Rogers a7c77c4f52 perf version: Add a feature for libpfm4
If perf is built with libpfm4 (LIBPFM4=1) then advertise it in perf -vv.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201019232545.4047264-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-04 09:42:40 -03:00
Arnaldo Carvalho de Melo 4751bddd3f perf tools: Make GTK2 support opt-in
This is bitrotting, nobody is stepping up to work on it, and since we
treat warnings as errors, feature detection is failing in its main,
faster test (tools/build/feature/test-all.c) because of the GTK+2
infobar check.

So make this opt-in, at some point ditch this if nobody volunteers to
take care of this.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-04 17:11:59 -03:00
Arnaldo Carvalho de Melo d3300a3c4e perf symbols: Move mem_info and branch_info out of symbol.h
The mem_info struct goes to mem-events.h and branch_info goes to
branch.h, where they belong, this way we can remove several headers from
symbols.h and trim the include dependency tree more.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-aupw71xnravcsu2xoabfmhpc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31 22:27:48 -03:00
Ravi Bangoria 916c31fff9 perf version: Fix segfault due to missing OPT_END()
'perf version' on powerpc segfaults when used with non-supported
option:
  # perf version -a
  Segmentation fault (core dumped)

Fix this.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Tested-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190611030109.20228-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-15 07:59:05 -03:00
Alexey Budankov 3b1c5d9659 tools build: Implement libzstd feature check, LIBZSTD_DIR and NO_LIBZSTD defines
Implement libzstd feature check, NO_LIBZSTD and LIBZSTD_DIR defines to
override Zstd library sources or disable the feature from the command
line:

  $ make -C tools/perf LIBZSTD_DIR=/path/to/zstd/sources/ clean all
  $ make -C tools/perf NO_LIBZSTD=1 clean all

Auto detection feature status is reported just before compilation
starts.  If your system has some version of the zstd library
preinstalled then the build system finds and uses it during the build.

If you still prefer to compile with some other version of zstd library
you have capability to refer the compilation to that version using
LIBZSTD_DIR define.

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/9b4cd8b0-10a3-1f1e-8d6b-5922a7ca216b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-04-01 15:18:10 -03:00
Jin Yao 8a812bf552 perf version: Print status for syscall_table
This patch doesn't print "libaudit" line if HAVE_SYSCALL_TABLE_SUPPORT
is available and add a line for HAVE_SYSCALL_TABLE_SUPPORT.

For example,

$ ./perf -vv
perf version 4.13.rc5.gc2f8af9
                 dwarf: [ on  ]  # HAVE_DWARF_SUPPORT
    dwarf_getlocations: [ on  ]  # HAVE_DWARF_GETLOCATIONS_SUPPORT
                 glibc: [ on  ]  # HAVE_GLIBC_SUPPORT
                  gtk2: [ on  ]  # HAVE_GTK2_SUPPORT
         syscall_table: [ on  ]  # HAVE_SYSCALL_TABLE_SUPPORT
                libbfd: [ on  ]  # HAVE_LIBBFD_SUPPORT
                libelf: [ on  ]  # HAVE_LIBELF_SUPPORT
               libnuma: [ on  ]  # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on  ]  # HAVE_LIBNUMA_SUPPORT
               libperl: [ on  ]  # HAVE_LIBPERL_SUPPORT
             libpython: [ on  ]  # HAVE_LIBPYTHON_SUPPORT
              libslang: [ on  ]  # HAVE_SLANG_SUPPORT
             libcrypto: [ on  ]  # HAVE_LIBCRYPTO_SUPPORT
             libunwind: [ on  ]  # HAVE_LIBUNWIND_SUPPORT
    libdw-dwarf-unwind: [ on  ]  # HAVE_DWARF_SUPPORT
                  zlib: [ on  ]  # HAVE_ZLIB_SUPPORT
                  lzma: [ on  ]  # HAVE_LZMA_SUPPORT
             get_cpuid: [ on  ]  # HAVE_AUXTRACE_SUPPORT
                   bpf: [ on  ]  # HAVE_LIBBPF_SUPPORT

The line "syscall_table: [ on  ]  # HAVE_SYSCALL_TABLE_SUPPORT" is
new created.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1523269609-28824-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-12 10:33:34 -03:00
Jin Yao 9ff2a64708 perf version: Print the compiled-in status of libraries
This patch checks the values passed by CFLAGS (-DHAVE_XXX) and then
print the status of libraries.

For example, if HAVE_DWARF_SUPPORT is defined, that means the library
"dwarf" is compiled-in. The patch will print the status "on" for this
library otherwise it print the status "OFF".

A new option '--build-options' created for 'perf version' supports the
printing of library status.

For example:

$ ./perf version --build-options
    or
  ./perf --version --build-options
    or
  ./perf -v --build-options

perf version 4.13.rc5.g6727c5
                 dwarf: [ on  ]  # HAVE_DWARF_SUPPORT
    dwarf_getlocations: [ on  ]  # HAVE_DWARF_GETLOCATIONS_SUPPORT
                 glibc: [ on  ]  # HAVE_GLIBC_SUPPORT
                  gtk2: [ on  ]  # HAVE_GTK2_SUPPORT
              libaudit: [ OFF ]  # HAVE_LIBAUDIT_SUPPORT
                libbfd: [ on  ]  # HAVE_LIBBFD_SUPPORT
                libelf: [ on  ]  # HAVE_LIBELF_SUPPORT
               libnuma: [ on  ]  # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on  ]  # HAVE_LIBNUMA_SUPPORT
               libperl: [ on  ]  # HAVE_LIBPERL_SUPPORT
             libpython: [ on  ]  # HAVE_LIBPYTHON_SUPPORT
              libslang: [ on  ]  # HAVE_SLANG_SUPPORT
             libcrypto: [ on  ]  # HAVE_LIBCRYPTO_SUPPORT
             libunwind: [ on  ]  # HAVE_LIBUNWIND_SUPPORT
    libdw-dwarf-unwind: [ on  ]  # HAVE_DWARF_SUPPORT
                  zlib: [ on  ]  # HAVE_ZLIB_SUPPORT
                  lzma: [ on  ]  # HAVE_LZMA_SUPPORT
             get_cpuid: [ on  ]  # HAVE_AUXTRACE_SUPPORT
                   bpf: [ on  ]  # HAVE_LIBBPF_SUPPORT

v4:

1. Also print the macro name. That would make it easier
   to grep around in the source looking for where code
   related a particular features is located.

2. Update since HAVE_DWARF_GETLOCATIONS is renamed to
   HAVE_DWARF_GETLOCATIONS_SUPPORT

v3:

Remove following unnecessary help message.

1. [ on  ]: library is compiled-in
   [ OFF ]: library is disabled in make configuration
            OR library is not installed in build environment

2. Create '--build-options' option.

3. Use standard option parsing API 'parse_options'.

v2:

1. Use IS_BUILTIN macro to replace #ifdef/#endif block.

2. Print color for on/OFF.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1522402036-22915-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-02 13:50:30 -03:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Arnaldo Carvalho de Melo 7a8ef4c4b5 perf tools: Remove string.h, unistd.h and sys/stat.h from util.h
Not needed in this header, added to the places that need FILE,
putchar(), access() and a few other prototypes.

Link: http://lkml.kernel.org/n/tip-xxtdsl6nsna82j7puwbdjqhs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24 13:43:33 -03:00
Arnaldo Carvalho de Melo b0ad8ea664 perf tools: Remove unused 'prefix' from builtin functions
We got it from the git sources but never used it for anything, with the
place where this would be somehow used remaining:

  static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
  {
	prefix = NULL;
	if (p->option & RUN_SETUP)
		prefix = NULL; /* setup_perf_directory(); */

Ditch it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-27 11:58:09 -03:00
Josh Poimboeuf 0a4bb5da95 perf tools: Move cmd_version() to builtin-version.c
Move cmd_version() to its own file so that help.c can be moved to a
library.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/e908b1b68f20ab6d8d33941d5571c23110622e60.1449548395.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09 13:42:03 -03:00