Now that we only configure the PixelValve in vc4_crtc_config_pv, it doesn't
really make much sense to dump its register content in its caller.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c195af7d9e140a2a6db32992ee7e54071c6f94ba.1599120059.git-series.maxime@cerno.tech
The driver resets the pixelvalve FIFO in a number of occurences without
always using the same sequence.
Since this will be critical for BCM2711, let's move that sequence to a
function so that we are consistent.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/fb31003a9eee02c4b949556299ff41f0a113499a.1599120059.git-series.maxime@cerno.tech
The previous generations were only supporting a single HDMI controller, but
that's about to change, so put an index as well to differentiate between
the two controllers.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/84e11e4793aaa30d6e5c56e305d22404ac5a932d.1599120059.git-series.maxime@cerno.tech
The longer FIFOs in vc5 pixelvalves means that the FIFO full level
doesn't fit in the original register field and that we also have a
secondary field. In order to prepare for this, let's move the registers
fill part to a helper function.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/e46a3823128af50c1c833de8fa9b95e9b86c2f66.1599120059.git-series.maxime@cerno.tech
Not all pixelvalve FIFOs in vc5 have the same depth, so we need to add that
to our vc4_crtc_data structure to be able to compute the fill level
properly later on.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/7df3549c1bea9b0a27c784dc416bb9a831e4e18f.1599120059.git-series.maxime@cerno.tech
The HVS found in the BCM2711 has 6 outputs and 3 FIFOs, with each output
being connected to a pixelvalve, and some muxing between the FIFOs and
outputs.
Any output cannot feed from any FIFO though, and they all have a bunch of
constraints.
In order to support this, let's store the possible FIFOs each output can be
assigned to in the vc4_crtc_data, and use that information at atomic_check
time to iterate over all the CRTCs enabled and assign them FIFOs.
The channel assigned is then set in the vc4_crtc_state so that the rest of
the driver can use it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f9aba3814ef37156ff36f310118cdd3954dd3dc5.1599120059.git-series.maxime@cerno.tech
The vc4 atomic commit loop has an handrolled loop that is basically
identical to for_each_new_crtc_state, let's convert it to that helper.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a712d2b70aaee20379cfc52c2141aa2f6e2a9d5b.1599120059.git-series.maxime@cerno.tech
The VIDEN bit in the pixelvalve currently being used to enable or disable
the pixelvalve seems to not be enough in some situations, which whill end
up with the pixelvalve stalling.
In such a case, even re-enabling VIDEN doesn't bring it back and we need to
clear the FIFO. This can only be done if the pixelvalve is disabled though.
In order to overcome this, we can configure the pixelvalve during
mode_set_no_fb by calling vc4_crtc_config_pv, but only enable it in
atomic_enable and flush the FIFO there, and in atomic_disable disable the
pixelvalve again.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e97596f62f4df83424d994a23465463ac60f986e.1599120059.git-series.maxime@cerno.tech
The vc4_crtc_handle_page_flip already has a local variable holding the
value of vc4_crtc->channel, so let's use it instead.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/439c589baec72ddb89159857a2d078fdd77b02a2.1599120059.git-series.maxime@cerno.tech
In vc5, the HVS has 6 outputs and 3 FIFOs (or channels), with
pixelvalves each being assigned to a given output, but each output can
then be muxed to feed from multiple FIFOs.
Since vc4 had that entirely static, both were probably equivalent, but
since that changes, let's rename hvs_channel to hvs_output in the
vc4_crtc_data, since a pixelvalve is really connected to an output, and
not to a FIFO.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b7618bb17b1c435c5d6ce50bcde2fe9243281d02.1599120059.git-series.maxime@cerno.tech
The COB allocation depends on the HVS channel used for a given
pixelvalve.
While the channel allocation was entirely static in vc4, vc5 changes
that and at bind time, a pixelvalve can be assigned to multiple
HVS channels.
Let's prepare that rework by allocating the COB when it's actually
needed.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/484cbd4b00cfeee425295df438222258cc39a3dd.1599120059.git-series.maxime@cerno.tech
Some of the HDMI pixelvalves in vc5 output two pixels per clock cycle.
Let's put the number of pixel output per clock cycle in the CRTC data and
update the various calculations to reflect that.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/18a3bb079981ba820132b37e736a4bb371234d2e.1599120059.git-series.maxime@cerno.tech
Let's now create more planes that can be affected to all the CRTCs.
vc4 has 3 CRTCs, 1 primary and 1 cursor each, and was having 24 (8
planes per CRTC) overlays.
However, vc5 has 5 CRTCs, so keeping the same logic would put us at 50
planes which is well above the 32 planes limit imposed by DRM.
Using 16 seems like a good tradeoff between staying under 32 and yet
providing enough planes.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/b41003001541fc2bb23668c699c0369ff7983be8.1599120059.git-series.maxime@cerno.tech
The current code is using the maximum of the source line size and the
destination line size to compute the size of the LBM to allocate.
While this is simpler, it starts to be an issue with modes such as 4k with
a quite long that will consume all the available memory, so we no longer
have that luxury.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b9e091883a4f7395c5b6a4f7c6070225934293db.1599120059.git-series.maxime@cerno.tech
In order to prevent timeouts and stalls in the pipeline, the core clock
needs to be maxed at 500MHz during a modeset on the BCM2711.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/37ed9e0124c5cce005ddc8dafe821d8b0da036ff.1599120059.git-series.maxime@cerno.tech
The HVS found in the BCM2711 is slightly different from the previous
generations.
Most notably, the display list layout changes a bit, the LBM doesn't have
the same size and the formats ordering for some formats is swapped.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1d02fab3b916d639c2dc05608c117bbd8230ebe8.1599120059.git-series.maxime@cerno.tech
Add support for the video pattern generator (VPG) BER pattern mode and
configuration in runtime.
This enables using the debugfs interface to manipulate the VPG after
the pipeline is set.
Also, enables the usage of the VPG BER pattern.
Changes in v2:
- Added VID_MODE_VPG_MODE
- Solved incompatible return type on __get and __set
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Adrian Pop <pop.adrian61@gmail.com>
Signed-off-by: Angelo Ribeiro <angelo.ribeiro@synopsys.com>
Tested-by: Yannick Fertre <yannick.fertre@st.com>
Tested-by: Adrian Pop <pop.adrian61@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a809feb7d7153a92e323416f744f1565e995da01.1586180592.git.angelo.ribeiro@synopsys.com
Current code enables the HS clock when video mode is started or to
send out a HS command, and disables the HS clock to send out a LP
command. This is not what DSI spec specify.
Enable HS clock either in command and in video mode.
Set automatic HS clock management for panels and devices that
support non-continuous HS clock.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701194234.18123-1-yannick.fertre@st.com
Current code does not properly computes the max length of LP
commands that can be send during H or V sync, and rely on static
values.
Limiting the max LP length to 4 byte during the V-sync is overly
conservative.
Relax the limit and allows longer LP commands (16 bytes) to be
sent during V-sync.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701143131.841-1-yannick.fertre@st.com
Current code only sends LP commands in command mode.
Allows sending LP commands also in video mode by setting the
proper flag in DSI_VID_MODE_CFG.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708140836.32418-1-yannick.fertre@st.com
The upstream S6E63M0 driver has some peculiarities around
the prepare/enable disable/unprepare sequence: the screen
is taken out of sleep in prepare() as part of
s6e63m0_init() the put to on with MIPI_DCS_SET_DISPLAY_ON
in enable().
However it is just put into sleep mode directly in
disable(). As disable()/enable() can be called without
unprepare()/prepare() being called, this is unbalanced,
we should take the display out of sleep in enable()
then turn it off().
Further MIPI_DCS_SET_DISPLAY_OFF is never called
balanced with MIPI_DCS_SET_DISPLAY_ON.
The vendor driver for Samsung GT-I8190 (Golden) does all
of these things in strict order.
Augment the driver to do exit sleep/set display on in
enable() and set display off/enter sleep in disable().
Further send an explicit reset pulse in power_on() so we
come up in a known state, and issue the MCS_ERROR_CHECK
command after setting display on like the vendor driver
does. Also use the timings from the vendor driver in
the sequence.
Doing all of these things makes the display much more
stable on the Samsung GT-I8190 when enabling/disabling
the display pipeline.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817213906.88207-1-linus.walleij@linaro.org
We add code to identify a few different panels mounted
on the s6e63m0 controller. This is necessary to achieve
the proper biasing with DSI versions of the panel.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-5-linus.walleij@linaro.org
This adds code to send read commands to read a single
byte from the display, in order to perform MTP ID
look-up of the mounted panel on the s6e63m0 controller.
This is needed for proper biasing on the DSI variants.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-4-linus.walleij@linaro.org
This makes it possible to use the s6e63m0 panel with a
DSI host, such as in the Samsung GT-I8190 (Golden) mobile
phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-3-linus.walleij@linaro.org
This panel can be accessed using both SPI and DSI.
To make it possible to probe and use the device also from
a DSI bus, first break out the SPI support to its own file.
Since all the panel driver does is write DCS commands to
the panel, we pass a DCS write function to probe()
from each subdriver.
We make the Kconfig entry for SPI mode default so all
current users will continue to work.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/384873/
Following functions are only used internally, not by drivers:
- devm_drm_dev_init
Also, now that we have a very slick and polished way to allocate a
drm_device with devm_drm_dev_alloc, update all the docs to reflect the
new reality. Mostly this consists of deleting old and misleading
hints. Two main ones:
- it is no longer required that the drm_device base class is first in
the structure. devm_drm_dev_alloc can cope with it being anywhere
- obviously embedded now strongly recommends using devm_drm_dev_alloc
v2: Fix typos (Noralf)
v3: Split out the removal of drm_dev_init, that's blocked on some
discussions on how to convert vgem/vkms/i915-selftests. Adjust commit
message to reflect that.
Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org> (v2)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200902072627.3617301-1-daniel.vetter@ffwll.ch
That is not used any more.
v2: keep the NULL checks in TTM.
v3: remove unused variable
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/388646/
While working on TTM cleanups I've found that the io_reserve_lru used by
Nouveau is actually not working at all.
In general we should remove driver specific handling from the memory
management, so this patch moves the io_reserve_lru handling into Nouveau
instead.
v2: don't call ttm_bo_unmap_virtual in nouveau_ttm_io_mem_reserve
v3: rebased and use both base and offset in the check
v4: fix small typos and test the patch
v5: rebased and keep the mem.bus init in TTM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/388643/
We are trying to remove the io_lru handling and depend
on zero init base, offset and addr here.
v2: init addr as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/388642/
When going through a disable/enable cycle without changing the
framebuffer the optimization added by commit 3954ff10e0 ("drm/virtio:
skip set_scanout if framebuffer didn't change") causes the screen stay
blank. Add a bool to force an update to fix that.
v2: use drm_atomic_crtc_needs_modeset() (Daniel).
Cc: 1882851@bugs.launchpad.net
Fixes: 3954ff10e0 ("drm/virtio: skip set_scanout if framebuffer didn't change")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Diego Viola <diego.viola@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200818072511.6745-2-kraxel@redhat.com
The only usage of these is to assign their address to the fbops field in
the fb_info struct, which is a const pointer. Make them const to allow
the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830211741.17326-1-rikard.falkeborn@gmail.com
In order to shrink drm_display_mode below the magic two cacheline
mark in 64bit we need to shrink it by another 8 bytes. The easiest
thing to eliminate is the 'export_head' list head which is only
used during the getconnector ioctl to temporarly track which modes
on the connector's mode list are to be exposed and which are to
remain hidden.
We can simply replace the list head with a boolean which we use
to tag the modes that are to be exposed. If we make sure to clear
the tags after we're done with them we don't even need an extra
loop over the modes to reset the tags at the start of the
getconnector ioctl.
Conveniently we already have a hole for the boolean left
behind by the removal of mode->private_flags. The final size
of the struct is now 112 bytes on 32bit and 120 bytes on 64bit.
Another alternative would be a temp bitmask so we wouldn't have
to have anything in the mode struct itself. The main issue is
how large of a bitmask do we need? I guess we could allocate
it dynamically but that means an extra kcalloc() and an extra
loop through the modes to count them first (or grow the bitmask
with krealloc() as needed).
CC: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-17-ville.syrjala@linux.intel.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
For DP MST outputs, the i2c device currently only supports transfers
that can be implemented using remote i2c reads. Such transfers must
consist of zero or more write transactions followed by one read
transaction. DDC/CI commands require standalone write transactions and
hence aren't supported.
Since each remote i2c write is handled as a separate transfer, remote
i2c writes can support transfers consisting of write transactions, where
all but the last have I2C_M_STOP set. According to the DDC/CI 1.1
standard, DDC/CI commands only require a single write or read
transaction in a transfer, so this is sufficient.
For i2c transfers meeting the above criteria, generate and send a remote
i2c write message for each transaction. Add the trivial remote i2c write
reply parsing support so remote i2c write acks bubble up correctly.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/37
Signed-off-by: Sam McNally <sammc@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727160225.1.I4e95a534de051551cd143e6cb83d4c5a9b0ad1cd@changeid
When verify_crc_source() fails, source needs to be freed.
However, current code is returning directly and ends up
leaking memory.
Fixes: d5cc15a0c6 ("drm: crc: Introduce verify_crc_source callback")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: change Fixes: tag per Laurent's review]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819082228.26847-1-dinghao.liu@zju.edu.cn
The VKMS blend function was ignoring the alpha channel and just
overwriting vaddr_src with vaddr_dst. This XRGB approach triggers a
warning when running the kms_cursor_crc/cursor-alpha-transparent test
case. In IGT, cairo_format_argb32 uses premultiplied alpha (according to
documentation). Also current DRM assumption is that alpha is
premultiplied. Therefore, this patch considers premultiplied alpha
blending eq to compose vaddr_src with vaddr_dst.
This change removes the following cursor-alpha-transparent warning:
"Suspicious CRC: All values are 0."
V2:
- static for local functions
- const for the read-only variable argb_src
- replaces variable names
- drops unnecessary comment
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200825114532.abzdooluny2ekzvm@smtp.gmail.com
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit
f098f168e9 ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC
panel") has fixed the bus formats, but forgot to address the bpc value.
Set it to 6.
Fixes: f098f168e9 ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com
DSI end-points are supposed to be at node 0 and node 1 as per binding.
So fix this and use node 0 and node 1 for dsi.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 23278bf54a ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828074251.3788165-1-vkoul@kernel.org
The LVDS controller can invert the polarity / lanes of the LVDS output.
The default polarity causes some issues on some panels.
However, U-Boot has always used the opposite polarity without any reported
issue, and the only currently supported LVDS panel in-tree (the TBS A711)
seems to be able to work with both settings.
Let's just use the same polarity than U-Boot to be more consistent and
hopefully support all the panels.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: Ondrej Jirman <megous@megous.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200704133803.37330-1-maxime@cerno.tech
Print an error message inside ps8640_bridge_vdo_control() function when
it fails so we can simplify a bit the callers, they will only need to
check the error code.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-5-enric.balletbo@collabora.com
Bridge drivers that implement the new model only shall return an error
from their attach() handler when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag
is not set. So make sure we return an error because only the new
drm_bridge model is supported.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-4-enric.balletbo@collabora.com
The PS8640 DSI-to-eDP bridge can retrieve the EDID, so implement the
.get_edid callback and set the flag to indicate the core to use it.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-3-enric.balletbo@collabora.com
In an eDP application, HPD is not required and on most bridge chips
useless. If HPD is not used, we need to set initial status as connected,
otherwise the connector created by the drm_bridge_connector API remains
in an unknown state.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-2-enric.balletbo@collabora.com
If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr,
then a null pointer dereference is accessed.
The patch adds checking of the return value of ge_b850v3_lvds_init().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819143756.30626-1-lutovinova@ispras.ru
This patch implements WA for AM65xx erratum i2000, which causes YUV
formats to show wrong colors.
An earlier patch removed a partial WA:
a8d9d7da15 ("drm/tidss: remove AM65x PG1 YUV erratum code")
The patch explains the reasoning for removal. The change in plans has
been that it has become clear that there are and will be users for PG1
SoCs and as such it's good to implement the WA for PG1s.
This patch adds the WA back so that it is only used on SR1.0 (which is
the new name for PG1). The previous WA code didn't check the SoC
revision, which this patch does.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200812112625.59897-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
The OMAP DRM driver includes <linux/gpio.h> into the two
hdmi4.c and hdmi5.c files but does not use any symbols from
these files. Drop the includes.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626220606.340937-1-linus.walleij@linaro.org
There is already a 'struct device' pointer in the drm_panel structure,
that we can access easily from our priv structure, so there's no need
for a separate 'dev' field there.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-3-paul@crapouillou.net
The drm_panel_of_backlight() function must be called after
drm_panel_init(), according to the function's documentation; otherwise
the backlight won't be properly initialized.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-2-paul@crapouillou.net
drm-next reverted the changes to ttm_tt_create() to do the
NULL check inside the function, but drm-misc-next adds new
users of this approach.
Re-apply the NULL check change inside the function to fix this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/386628/
Reviewing this block of code in cdv_intel_dp_init()
ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ...
cdv_intel_edp_panel_vdd_off(gma_encoder);
if (ret == 0) {
/* if this fails, presume the device is a ghost */
DRM_INFO("failed to retrieve link info, disabling eDP\n");
drm_encoder_cleanup(encoder);
cdv_intel_dp_destroy(connector);
goto err_priv;
} else {
The (ret == 0) is not strict enough.
cdv_intel_dp_aux_native_read() returns > 0 on success
otherwise it is failure.
So change to <=
Fixes: d112a8163f ("gma500/cdv: Add eDP support")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805205911.20927-1-trix@redhat.com
Finalize he conversion of GMA500 to use only GPIO descriptors.
The GPIO look-up-table is associated with the device directly
in the GMA500 Medfield chip driver since no explicit platform
type device (such as in x86/platform/intel-mid) exists: the
GMA500 probes directly from the PCI device. Apparently GPIOs
128 and 34 are used on all of these so just go ahead and
register those for resetting the DSI pipes.
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703125901.513476-1-linus.walleij@linaro.org
sparse complains about having 2 "__iomem" attributes on the same line
where only one is needed since the first one applies to everything
up to the ending ';'.
However, to make it clear(er) that both of these pointers are
"__iomem", use separate lines for them.
../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: warning: duplicate [noderef]
../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: error: multiple address space given: __iomem & __iomem
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a8185578-a69a-16b0-6fdf-f4e46bc4f61f@infradead.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-6-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-5-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-4-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-3-sam@ravnborg.org
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-2-sam@ravnborg.org
The malidp driver uses GEM object functions for callbacks. Fix it to
use them internally as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Fixes: ecdd647464 ("drm/malidp: Use GEM CMA object functions")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807111022.12117-1-tzimmermann@suse.de
Add support for UUID-based resource sharing mechanism to virtgpu. This
implements the new virtgpu commands and hooks them up to dma-buf's
get_uuid callback.
Signed-off-by: David Stevens <stevensd@chromium.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200818071343.3461203-4-stevensd@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200617215707.GA16785@embeddedor
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu 5.0 introduces a new qxl hardware revision 5. Unlike revision 4
(and below) the device doesn't switch back into vga compatibility mode
when someone touches the vga ports. So we don't have to reserve the
vga ports any more to avoid that happening.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200807105501.24599-1-kraxel@redhat.com
The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for the panel-simple driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-5-digetx@gmail.com
The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for the generic LVDS panel.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-4-digetx@gmail.com
This reads the DT setting for the panel rotation to set the panel
orientation in the get_modes callback.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-3-digetx@gmail.com
This adds a helper function for reading the rotation (panel
orientation) from the device tree.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-2-digetx@gmail.com
Feixin K101-IM2BYL02 is a new panel by Feixin designed as a replacement
to their K101-IM2BA02 panel. This panel utilizes the Ilitek ILI9881C
controller.
Add this panel's initialzation sequence and timing to ILI9881C driver.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719171007.276383-2-icenowy@aosc.io
There're more panels with ILI9881C controller than the Bananapi one
supported by this driver.
Extract the mode and init sequence part, to prepare the driver for
adding new panels.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719170411.275812-2-icenowy@aosc.io
Convert the Sharp LS020B1DD01D panel entry from using a struct
display_timing to using a struct drm_display_mode, as display_timing
seems to be the old and legacy format.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-4-paul@crapouillou.net
If you pass a string that is not terminated with a carriage return to
dev_err(), it will eventually be printed with a carriage return, but
not right away, since the kernel will wait for a pr_cont().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-3-paul@crapouillou.net
Instead of manipulating the backlight directly in this driver, register
it in the probe using drm_panel_of_backlight() and let the drm_panel
framework code handle it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-2-paul@crapouillou.net
The vendor driver makes a few retries on read DSI
transactions, something that is needed especially in
case of read (such as reading the panel MTP ID) while
the panel is running in video mode. This happens on
the Samsung s6e63m0 panel on the Golden device.
Retry reads and writes alike three times.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200814194451.3494294-1-linus.walleij@linaro.org
The majority of this batch is conversion of the PWM period and duty
cycle to 64-bit unsigned integers, which is required so that some types
of hardware can generate the full range of signals that they're capable
of. The remainder is mostly minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=v6MG
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The majority of this batch is conversion of the PWM period and duty
cycle to 64-bit unsigned integers, which is required so that some
types of hardware can generate the full range of signals that they're
capable of.
The remainder is mostly minor fixes and cleanups"
* tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: bcm-iproc: handle clk_get_rate() return
pwm: Replace HTTP links with HTTPS ones
pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header
pwm: mediatek: Provide missing kerneldoc description for 'soc' arg
pwm: bcm-kona: Remove impossible comparison when validating duty cycle
pwm: bcm-iproc: Remove impossible comparison when validating duty cycle
pwm: iqs620a: Use lowercase hexadecimal literals for consistency
pwm: Convert period and duty cycle to u64
clk: pwm: Use 64-bit division function
backlight: pwm_bl: Use 64-bit division function
pwm: sun4i: Use nsecs_to_jiffies to avoid a division
pwm: sifive: Use 64-bit division macro
pwm: iqs620a: Use 64-bit division
pwm: imx27: Use 64-bit division macro
pwm: imx-tpm: Use 64-bit division macro
pwm: clps711x: Use 64-bit division macro
hwmon: pwm-fan: Use 64-bit division macro
drm/i915: Use 64-bit division macro
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXzaSXAAKCRCAXGG7T9hj
vuSEAP4qOIv7Hr1wMJfTsN7ZoNNr/K6ph8ADcjFm9RGikn8MawD8CU/OfcFKJFwl
UVwM1HPnRG6pvCI9bmHS4WYrIBYBVw0=
=Bi6R
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- Remove support for running as 32-bit Xen PV-guest.
32-bit PV guests are rarely used, are lacking security fixes for
Meltdown, and can be easily replaced by PVH mode. Another series for
doing more cleanup will follow soon (removal of 32-bit-only pvops
functionality).
- Fixes and additional features for the Xen display frontend driver.
* tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drm/xen-front: Pass dumb buffer data offset to the backend
xen: Sync up with the canonical protocol definition in Xen
drm/xen-front: Add YUYV to supported formats
drm/xen-front: Fix misused IS_ERR_OR_NULL checks
xen/gntdev: Fix dmabuf import with non-zero sgt offset
x86/xen: drop tests for highmem in pv code
x86/xen: eliminate xen-asm_64.S
x86/xen: remove 32-bit Xen PV guest support
While importing a dmabuf it is possible that the data of the buffer
is put with offset which is indicated by the SGT offset.
Respect the offset value and forward it to the backend.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
The MCDE DSI link hardware which is modeled like a bridge
in DRM, connected further to the panel bridge, creating
a pipeline.
We have been using the .pre_enable(), .enable(),
.disable() and .post_disable() callbacks from the bridge
to set this up in a chained manner: first the display
controller goes online and then in successive order
each bridge in the pipeline. Inside DRM it works
like this:
drm_atomic_helper_commit_tail()
drm_atomic_helper_commit_modeset_enables()
struct drm_crtc_helper_funcs .atomic_enable()
struct drm_simple_display_pipe_funcs .enable()
MCDE display enable call
drm_atomic_bridge_chain_enable()
struct drm_bridge_funcs .pre_enable()
mcde_dsi_bridge_pre_enable()
panel_bridge_pre_enable()
struct drm_panel_funcs .prepare()
struct drm_bridge_funcs .enable()
mcde_dsi_bridge_enable()
panel_bridge_enable()
struct drm_panel_funcs .enable()
A similar sequence is executed for disabling.
Unfortunately this is not what the hardware needs: at
a certain stage in the enablement of the display
controller the DSI link needs to come up to support
video mode, else something (like a FIFO flow) locks
up the hardware and we never get picture.
Fix this by simply leaving the pre|enable and
post|disable callbacks unused, and establish two
cross-calls from the display controller to bring up
the DSI link at the right place in the display
bring-up sequence and vice versa in the shutdown
sequence.
For command mode displays, it works just fine to
also enable the display flow early. The only time
we hold it back right now is in one-shot mode,
on-demand display updates.
When combined with the previous patch and some patches
for the S6E63M0 display controller to support DSI
mode, this gives working display on the Samsung
GT-I8190 (Golden) phone. It has also been tested working
on the Samsung GT-S7710 (Skomer) phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-4-linus.walleij@linaro.org
To make sure that the MCDE is in a reasonable state during
set-up, perform a reset by power cycling the block by dropping
the on-chip regulator reference after probe. The display
subsystem (DSS) has no dedicated reset line so dropping
the EPOD regulator is the only real way of resetting it.
We introduce code to enable and disable the regulator in
the display enable/disable callbacks.
We move the generic MCDE setup such as muxing of DPI
signals and masking of interrupts to the display
handling.
When we drop the power to the whole display subsystem, not
only MCDE but also the DSI links lose their state. Therefore
we move the DSI block reset and hardware initialization
code to the mcde_dsi_bridge_pre_enable() callback so this
happens every time we start up the bridge, as we may have
lost the power.
We move the final disablement of the interrupts and
clocks to the mcde_dsi_bridge_post_disable() callback
rather than have it in the mcde_dsi_bridge_disable()
callback, as some control messages may still be sent
over the DSI host after the bridge has been shut down.
This (together with a patch for the corresponding
panel) makes the Samsung GT-S7710 successfully disable
and re-enable its display, cutting all power while
disabled and re-initializing the hardware when coming
back up.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-3-linus.walleij@linaro.org
The pixel fetcher FIFO depth was just hardcoded to 48
which works fine as long as the framebuffer is 32BPP
and the DSI output is RGB888.
We will need more elaborate handling for some buffer
formats and displays, so start to improve this function
by setting reasonable defaults for 32, 24 and 16 BPP
framebuffers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-1-linus.walleij@linaro.org
Revamp the way that the flow of data to the display is
defined.
I realized that the hardware supports something like
5 different modes of flow: oneshot, command with TE IRQ,
command with BTA (bus turn around) and TE IRQ, video
with TE IRQ and video without TE IRQ instead synchronizing
to the output of the MCDE DSI formatter.
Like before the selection of the type of flow is done
from the DSI driver when we attach it to the MCDE and we
get to know what the display wants.
The new video mode synchronization method from the MCDE DSI
formatter is used on some upstream devices such as Golden.
This is the new default for video mode: stateless panels
do not as a rule generate TE IRQs.
Another semantic change is that we stop sending
a TE request before every command when sending data to
a display in command mode: this should only be explicitly
requested when using BTA, according to the vendor driver.
This has been tested and works fine with the command mode
displays I have. (All that are supported upstream.)
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729090915.252730-2-linus.walleij@linaro.org
The function mcde_display_send_one_frame() has a historical
name that stems from being implemented when the driver
only supported single frame updates.
Rename it mcde_start_flow() so that it reflects the current
usage.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729090915.252730-1-linus.walleij@linaro.org
Add YUYV to supported formats, so the frontend can work with the
formats used by cameras and other HW.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20200813062113.11030-4-andr2000@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The patch c575b7eeb89f: "drm/xen-front: Add support for Xen PV
display frontend" from Apr 3, 2018, leads to the following static
checker warning:
drivers/gpu/drm/xen/xen_drm_front_gem.c:140 xen_drm_front_gem_create()
warn: passing zero to 'ERR_CAST'
drivers/gpu/drm/xen/xen_drm_front_gem.c
133 struct drm_gem_object *xen_drm_front_gem_create(struct drm_device *dev,
134 size_t size)
135 {
136 struct xen_gem_object *xen_obj;
137
138 xen_obj = gem_create(dev, size);
139 if (IS_ERR_OR_NULL(xen_obj))
140 return ERR_CAST(xen_obj);
Fix this and the rest of misused places with IS_ERR_OR_NULL in the
driver.
Fixes: c575b7eeb89f: "drm/xen-front: Add support for Xen PV display frontend"
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200813062113.11030-3-andr2000@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Add missing include to fix build error:
hibmc_drm_drv.c:385:1: warning: data definition has no type or storage
class [enabled by default]
hibmc_drm_drv.c:385:1: error: type defaults to ‘int’ in declaration
of ‘module_init’ [-Werror=implicit-int]
hibmc_drm_drv.c:385:1: warning: parameter names (without types) in function
of ‘module_exit’ [-Werror=implicit-int]
hibmc_drm_drv.c:385:292:1: warning: parameter names (without types) in
function declaration [enabled by default]
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597289955-27381-1-git-send-email-tiantao6@hisilicon.com
Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived
from tc358764 driver and panel-raspberrypi-touchscreen. This driver is
meant to replace the panel-raspberrypi-touchscreen too, as the bridge
connection can be described in DT too.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: dri-devel@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200809105705.6334-2-marex@denx.de
core:
- Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi
- Remove null check for kfree in drm_dev_release.
- Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition.
- re-added docs for drm_gem_flink_ioctl()
- add orientation quirk for ASUS T103HAF
ttm:
- ttm: fix page-offset calculation within TTM
- revert patch causing vmwgfx regressions
fbcon:
- Fix a fbcon OOB read in fbdev, found by syzbot.
vga:
- Mark vga_tryget static as it's not used elsewhere.
amdgpu:
- Re-add spelling typo fix
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
- SMU i2c fix
- Power fixes
vmwgfx:
- regression fixes for modesetting crashes
- misc fixes
xlnx:
- Small fixes to xlnx.
omap:
- Fix mode initialization in omap_connector_mode_valid().
- force runtime PM suspend on system suspend
tidss:
- fix modeset init for DPI panels
-----BEGIN PGP SIGNATURE-----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=dr7v
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-08-12' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This has a few vmwgfx regression fixes we hit from the merge window
(one in TTM), it also has a bunch of amdgpu fixes along with a
scattering everywhere else.
core:
- Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi
- Remove null check for kfree in drm_dev_release.
- Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition.
- re-added docs for drm_gem_flink_ioctl()
- add orientation quirk for ASUS T103HAF
ttm:
- ttm: fix page-offset calculation within TTM
- revert patch causing vmwgfx regressions
fbcon:
- Fix a fbcon OOB read in fbdev, found by syzbot.
vga:
- Mark vga_tryget static as it's not used elsewhere.
amdgpu:
- Re-add spelling typo fix
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
- SMU i2c fix
- Power fixes
vmwgfx:
- regression fixes for modesetting crashes
- misc fixes
xlnx:
- Small fixes to xlnx.
omap:
- Fix mode initialization in omap_connector_mode_valid().
- force runtime PM suspend on system suspend
tidss:
- fix modeset init for DPI panels"
* tag 'drm-next-2020-08-12' of git://anongit.freedesktop.org/drm/drm: (70 commits)
drm/ttm: revert "drm/ttm: make TT creation purely optional v3"
drm/vmwgfx: fix spelling mistake "Cant" -> "Can't"
drm/vmwgfx: fix spelling mistake "Cound" -> "Could"
drm/vmwgfx/ldu: Use drm_mode_config_reset
drm/vmwgfx/sou: Use drm_mode_config_reset
drm/vmwgfx/stdu: Use drm_mode_config_reset
drm/vmwgfx: Fix two list_for_each loop exit tests
drm/vmwgfx: Use correct vmw_legacy_display_unit pointer
drm/vmwgfx: Use struct_size() helper
drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume
drm/amd/powerplay: put VCN/JPEG into PG ungate state before dpm table setup(V3)
drm/amd/powerplay: update swSMU VCN/JPEG PG logics
drm/amdgpu: use mode1 reset by default for sienna_cichlid
drm/amdgpu/smu: rework i2c adpater registration
drm/amd/display: Display goes blank after inst
drm/amd/display: Change null plane state swizzle mode to 4kb_s
drm/amd/display: Use helper function to check for HDMI signal
drm/amd/display: AMD OUI (DPCD 0x00300) skipped on some sink
drm/amd/display: Fix logger context
drm/amd/display: populate new dml variable
...
Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Merge more updates from Andrew Morton:
- most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction,
mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util,
memory-hotplug, cleanups, uaccess, migration, gup, pagemap),
- various other subsystems (alpha, misc, sparse, bitmap, lib, bitops,
checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump,
exec, kdump, rapidio, panic, kcov, kgdb, ipc).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits)
mm/gup: remove task_struct pointer for all gup code
mm: clean up the last pieces of page fault accountings
mm/xtensa: use general page fault accounting
mm/x86: use general page fault accounting
mm/sparc64: use general page fault accounting
mm/sparc32: use general page fault accounting
mm/sh: use general page fault accounting
mm/s390: use general page fault accounting
mm/riscv: use general page fault accounting
mm/powerpc: use general page fault accounting
mm/parisc: use general page fault accounting
mm/openrisc: use general page fault accounting
mm/nios2: use general page fault accounting
mm/nds32: use general page fault accounting
mm/mips: use general page fault accounting
mm/microblaze: use general page fault accounting
mm/m68k: use general page fault accounting
mm/ia64: use general page fault accounting
mm/hexagon: use general page fault accounting
mm/csky: use general page fault accounting
...
After the cleanup of page fault accounting, gup does not need to pass
task_struct around any more. Remove that parameter in the whole gup
stack.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The object flags created in radeon_ttm_placement_from_domain take care that
we use the correct caching for AGP, this is just superflous.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/384336/?series=80346&rev=1
The names get/put are associated with reference counting
in the Linux kernel, use alloc/free instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/384340/?series=80346&rev=1
The memory used to be allocated with devres helpers and released
automatically. In rare circumstances, the memory's release could
have happened before the DRM device got released, which would have
caused memory corruption of some kind. Now we're embedding the data
structures in struct hibmc_drm_private. The whole release problem
has been resolved, because struct hibmc_drm_private is allocated
with drmm_kzalloc and always released with the DRM device.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597218179-3938-3-git-send-email-tiantao6@hisilicon.com
The drm_mode_config_reset patches are very important fixing a recently
introduced kernel crash, the others fix various older issues which are
a bit less serious in practice.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Roland Scheidegger (VMware)" <rscheidegger.oss@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200812005941.19465-1-rscheidegger.oss@gmail.com
IRQ bypass support for vdpa and IFC
MLX5 vdpa driver
Endian-ness fixes for virtio drivers
Misc other fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl8yVEwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNPEH/0Dtq1s1V4r/kxtLUoMophv9wuORpWCr98BQ
2aOveTmwTOVdZVOiw2tzTgO9nbWx+cL2HvkU7Aajfpz5hh93Z2VOo2n4a7hBC79f
rlc3GXiG+pMk5RfmqGofIHTU+D6ony4D5SXlUDurLdtEwunyuqZwABiWkZjdclZJ
bv90IL8Upzbz0rxYr7k3z8UepdOCt7r4QS/o7STHZBjJRyylxmO/R2yTnh6PtpRK
Q/z35wJBJ3SKc8X3Fi0VOOSeGNZOiypkkl9ZnLVY5lExNAU1+2MMn2UK119SlCDV
MSxb7quYFF4cksXH1g77GMBNi1uADRh1dtFMZdkKhZGljGxKLxo=
=6VTZ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- IRQ bypass support for vdpa and IFC
- MLX5 vdpa driver
- Endianness fixes for virtio drivers
- Misc other fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (71 commits)
vdpa/mlx5: fix up endian-ness for mtu
vdpa: Fix pointer math bug in vdpasim_get_config()
vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()
vdpa/mlx5: fix memory allocation failure checks
vdpa/mlx5: Fix uninitialised variable in core/mr.c
vdpa_sim: init iommu lock
virtio_config: fix up warnings on parisc
vdpa/mlx5: Add VDPA driver for supported mlx5 devices
vdpa/mlx5: Add shared memory registration code
vdpa/mlx5: Add support library for mlx5 VDPA implementation
vdpa/mlx5: Add hardware descriptive header file
vdpa: Modify get_vq_state() to return error code
net/vdpa: Use struct for set/get vq state
vdpa: remove hard coded virtq num
vdpasim: support batch updating
vhost-vdpa: support IOTLB batching hints
vhost-vdpa: support get/set backend features
vhost: generialize backend features setting/getting
vhost-vdpa: refine ioctl pre-processing
vDPA: dont change vq irq after DRIVER_OK
...
Including:
- Removal of the dev->archdata.iommu (or similar) pointers from
most architectures. Only Sparc is left, but this is private to
Sparc as their drivers don't use the IOMMU-API.
- ARM-SMMU Updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell
Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d Updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel
drivers into their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test
coverage)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl8ygTIACgkQK/BELZcB
GuPZmRAAzSLuUNoQPWrFUbocNuZ/YHUCKdluKdYx26AgtYFwBrwzDAHPdq8HF8Hm
y8w2xiUVVP9uZ8gnDkAuwXBtg+yOnG9sRNFZMNdtCy1Q0ehp0HNsn/6NabxVpSml
QuAmd2PxMMopQRVLOR5YYvZl6JdiZx19W8X+trgwnR9Kghqq+7QXI9+D00jztRxQ
Qvh/9NvIdX3k+5R4ZPJaV6OhaFvxzQzQZwKuO61VqFOWZRH1z9Oo+aXDCWTFUjYN
IClTcG8qOK2W9/SOyYDXMoz30Yf0vcuDxhafi2JJVNcTPRmMWoeqff6yKslp76ea
lTepDcIKld1Ul9NoqfYzhhKiEaLcgMEW2ua6vk5YFVxBBqJfg5qdtDZzBxa0FiNx
TQrZFX3xjtZC6tRyy+eKWOj6vx7l0ONwwDxRc3HdvL+xE+KUdmsg82qHU4cAHRjp
U2dgTdlkTEd56q4BEQxmJAHYMIUrx2QAp6pa2+Jv/Iqpi9PsZ2k+l9Gy6h+rM7dn
Est/1gA4kDhKdCKfTx7g9EL6AAoU50WttxNmwMxrUrXX3fsstfY1fKgyZUPpkL7V
V5iXbbsdMQLHzOF2qiqIIMxMGYxr/x/FJ1DnSJ7j+jAXMF77d2B9iQttzImOVN2c
VXBxcVstWN7/xXjIy13C/83bRKwWqXaaS4cbv3Di0ZGFeD2oAF0=
=3O2Z
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
In order to successfully read ID of the MTP panel the
panel MTP control page must be unlocked. Previously
this wasn't encountered because in the setup with this
panel the power wasn't ever really dropped. When power
gets dropped from the panel, MTP needs to be unlocked.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808224322.1507713-1-linus.walleij@linaro.org
Since DP-specific information is stored in driver's structures, every
driver needs to implement subconnector property by itself. Display
Core already has the subconnector information, we only need to
expose it through DRM property.
v2:rebase
v3: renamed a function call
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David (ChunMing) Zhou <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Jeevan B <jeevan.b@intel.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Tested-by: Oleg Vasilev <oleg.vasilev@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1587732655-17544-5-git-send-email-jeevan.b@intel.com
Since DP-specific information is stored in driver's structures, every
driver needs to implement subconnector property by itself.
v2: rebase
v3: renamed a function call
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David (ChunMing) Zhou <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Jeevan B <jeevan.b@intel.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1587732655-17544-4-git-send-email-jeevan.b@intel.com
Since DP-specific information is stored in driver's structures, every
driver needs to implement subconnector property by itself.
v2: updates to match previous commit changes
v3: rebase
v4: renamed a function call
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Jeevan B <jeevan.b@intel.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> #and acked for merging
Tested-by: Oleg Vasilev <oleg.vasilev@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1587732655-17544-2-git-send-email-jeevan.b@intel.com
Currently, downstream port type is only reported in debugfs. This
information should be considered important since it reflects the actual
physical connector type. Some userspace (e.g. window compositors)
may want to show this info to a user.
The 'subconnector' property is already utilized for DVI-I and TV-out for
reporting connector subtype.
The initial motivation for this feature came from i2c test [1].
It is supposed to be skipped on VGA connectors, but it cannot
detect VGA over DP and fails instead.
v2:
- Ville: utilized drm_dp_is_branch()
- Ville: implement DP 1.0 downstream type info
- Replaced create_dp_properties with add_dp_subconnector_property
- Added dp_set_subconnector_property helper
v4:
- Ville: add DP1.0 best assumption about subconnector
- Ville: assume DVI is DVI-D
- Ville: reuse Writeback enum value for Virtual subconnector
- Renamed #defines: HDMI -> HDMIA, DP -> DisplayPort
v5: rebase
v6:
- Jani Nikula: renamed a function name
- Jani Nikula: addressed the issues with documentation
[1]: https://bugs.freedesktop.org/show_bug.cgi?id=104097
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Jeevan B <jeevan.b@intel.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1587732655-17544-1-git-send-email-jeevan.b@intel.com
- Untangle the header spaghetti which causes build failures in various
situations caused by the lockdep additions to seqcount to validate that
the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict per
CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot
validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored and
write_seqcount_begin() has a lockdep assertion to validate that the
lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API is
unchanged and determines the type at compile time with the help of
_Generic which is possible now that the minimal GCC version has been
moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs which
have been addressed already independent of this.
While generaly useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if the
writers are serialized by an associated lock, which leads to the well
known reader preempts writer livelock. RT prevents this by storing the
associated lock pointer independent of lockdep in the seqcount and
changing the reader side to block on the lock when a reader detects
that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and initializers.
-----BEGIN PGP SIGNATURE-----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=7Gj+
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
* add orientation quirk for ASUS T103HAF
* drm/omap: force runtime PM suspend on system suspend
* drm/tidss: fix modeset init for DPI panels
* re-added docs for drm_gem_flink_ioctl()
* ttm: fix page-offset calculation within TTM
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl8pWYUACgkQaA3BHVML
eiNGkAf+Lw+DXDm1C9cpSm2oj9XFiwUBI25G+4aDn6+3o5YAdkWGkVSSqb8wXzaL
XTE8iMmCfsz/LXGIHGa3lOhhwj/zXMOH+Eg9xt+vXvYFuaoOUxeCSz8WiRg7bNwx
gfaQvsX+2lVBkfcyn8s8NEJOBvKSzRl3JQcUrY3QWnvUZcM37E4NueZOkeygAqFl
Jjcq6DdQOskUOzkQb+6lxDtiBJQZ6jTZWIcIW9Ec8Xc6VqsxuKLM3iv17Lo+5qbj
1Enj1YBnOwK8Rs3AvhvB8vRJ/y1MBImnc3bheLxTGZ5NAsxwLarg0jRqzSsxuDOS
t9xz3voeyYUVHN91uaIRENIyqfvtkg==
=gN9V
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-08-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
* backmerge from drm-fixes at v5.8-rc7
* add orientation quirk for ASUS T103HAF
* drm/omap: force runtime PM suspend on system suspend
* drm/tidss: fix modeset init for DPI panels
* re-added docs for drm_gem_flink_ioctl()
* ttm: fix page-offset calculation within TTM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804125510.GA29670@linux-uq9g
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8nLmkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGBEkH/RJAnEan4gcdkBDf
2xS0yk4XLMjKZwbz61VSeKMUBkGCsh1cWsaAtJJAIVYj/6o/7mld01sZCnOASLnJ
ET0nXL2NiT/f+prYkTE5qeYH225/Yfh5jgmrqZtx/uXFCwgE5Nzi3f72IXQDmCR+
kmpNhNox3YqQTKXhv7DXobDKcO0n8nZavnhxmA9SBZn2h9RHvmvJghD0UOfLjMpA
1SbknaE67n5JN/JjI6TkYWk4nuJmqfvmBL5IYVDEZYO4UlM5Bqzhw0XN7Ax70K3M
KRK/eiqRmNwun5MxWnbzQU7t7iTgVmzjHLTpWGcM3V4blgGXC3uhjc+p/R8KTQUE
bIydSzs=
=fDeo
-----END PGP SIGNATURE-----
Merge tag 'v5.8' into drm-next
I need to backmerge 5.8 as I've got a bunch of fixes sitting
on an rc7 base that I want to land.
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is a spelling mistake in a DRM_ERROR message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
There is a spelling mistake in a DRM_ERROR message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Same problem as in stdu, same fix.
Fixes: 51f644b40b ("drm/atomic-helper: reset vblank on crtc reset")
Acked-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Same problem as in stdu, same fix.
Fixes: 51f644b40b ("drm/atomic-helper: reset vblank on crtc reset")
Acked-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
When converting to atomic the state reset was done by directly calling
the functions, and before the modeset object was fully initialized.
This means the various ->dev pointers weren't set up.
After
commit 51f644b40b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jun 12 18:00:49 2020 +0200
drm/atomic-helper: reset vblank on crtc reset
this started to oops because now we're trying to derefence
drm_crtc->dev. Fix this up by entirely switching over to
drm_mode_config_reset, called once everything is set up.
Fixes: 51f644b40b ("drm/atomic-helper: reset vblank on crtc reset")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
These if statements are supposed to be true if we ended the
list_for_each_entry() loops without hitting a break statement but they
don't work.
In the first loop, we increment "i" after the "if (i == unit)" condition
so we don't necessarily know that "i" is not equal to unit at the end of
the loop.
In the second loop we exit when mode is not pointing to a valid
drm_display_mode struct so it doesn't make sense to check "mode->type".
Fixes: a278724aa2 ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
The "entry" pointer is an offset from the list head and it doesn't
point to a valid vmw_legacy_display_unit struct. Presumably the
intent was to point to the last entry.
Also the "i++" wasn't used so I have removed that as well.
Fixes: d7e1958dbe ("drm/vmwgfx: Support older hardware.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
- Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi
- Fix a fbcon OOB read in fbdev, found by syzbot.
- Mark vga_tryget static as it's not used elsewhere.
- Small fixes to xlnx.
- Remove null check for kfree in drm_dev_release.
- Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition.
- Fix mode initialization in omap_connector_mode_valid().
-----BEGIN PGP SIGNATURE-----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=t36D
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2020-08-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next-fixes for v5.9-rc1:
- Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi
- Fix a fbcon OOB read in fbdev, found by syzbot.
- Mark vga_tryget static as it's not used elsewhere.
- Small fixes to xlnx.
- Remove null check for kfree in drm_dev_release.
- Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition.
- Fix mode initialization in omap_connector_mode_valid().
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b2043dad-f118-bd19-54a6-f23bf6264007@linux.intel.com
This driver is tested with two panels individually with Apq8016-IFC6309 board
https://www.inforcecomputing.com/products/single-board-computers-sbc/qualcomm-snapdragon-410-inforce-6309-micro-sbc
1. 1366x768@60 auo,b101xtn01 data-mapping = "jeida-24"
2. 800x480@60 innolux,at070tn92 data-mapping = "vesa-24"
- power off sequence in proper order
- put_unaligned_be16, put_unaligned_le32 macros used
- static function for mode_valid
- len initialized
- MODE_CLOCK_HIGH handled properly
- bus_formats handled in mode_valid
- GENMASK and FIELD_PREP used
- Kconfig proper indentation
- error handling endpoint data-lanes
- check for bus_formats unsupported
- display_timings naming local variables
- help modified
- ~vsdelay dynamic value set based on the
calculation of dsi speed, output speed, blanking
- panel->connector_type removed
- dual port implemented
- devm_drm_panel_bridge_add method used instead of panel
description modified
- regulator enable and disable with proper orders and delays
as per the spec
- removed drm_connector_status
- added bus_formats
- mdelay to usleep_range
- magic number to macros for CLRSI and mux registers
description modified
- replaced u32 instead of uint32_t
- updated alphabetic order of headers
- added SPDX identifier license
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1594388491-15129-2-git-send-email-simhavcs@gmail.com
Maxime Ripard