In preparation for the next patch, we want the engine to appear idle
after a reset (if there are no requests in flight). For execlists, this
entails clearing the active status on reset, it will be regenerated on
restarting the engine after the reset. In the process, note that a
couple of other status flags and checks could be moved into the
describing function.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-3-chris@chris-wilson.co.uk
Avoid injecting hangs in to the i915->kernel_context in case the GPU
reset leaves corruption in the context image in its wake (leading to
continual failures and system hangs after the selftests are ostensibly
complete). Use a sacrificial kernel_context instead.
v2: Closing a context is tricky; export a function (for selftests) from
i915_gem_context.c to get it right.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-2-chris@chris-wilson.co.uk
When injecting rapid resets, we must be careful to at least wait for the
previous reset to have taken effect and the engine restarted. If we
perform a second reset before that has happened, we will notice that the
engine hasn't recovered and declare it lost, wedging the device and
failing. In practice, since we wait for each hanging batch to start
before injecting the reset, this too-fast-reset condition can only be
triggered when moving onto the next engine in the test, so we need only
wait for the existing reset to complete before switching engines.
v2: Wrap up the wait inside a safety net to bail out in case of angry hw.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-1-chris@chris-wilson.co.uk
If we remember to cancel the signaler on a request when retiring it
(after we know that the request has been signaled), we do not need to
carry an additional request in the signaler itself. This prevents an
issue whereby the signaler threads may be delayed and hold on to
thousands of request references, causing severe memory fragmentation and
premature oom (most noticeable on 32b snb due to the limited GFP_KERNEL
and frequent use of inter-engine fences).
v2: Rename first_signal(), document reads outside of locks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203101914.24880-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
During testing, we trigger a lot of resets on an unbannable context
leading to massive amounts of irrelevant debug spam. Remove the
ban_score accounting and message for the unbannable context so that we
improve the signal:noise in the log messages for when the unexpected
occurs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205092201.19476-7-chris@chris-wilson.co.uk
Execlists is now enabled by default and included in the list of
capabilities printed out to dmesg and beyond. We do not need to mention
it again, every time we restart the engine, so kill the spam.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205092201.19476-6-chris@chris-wilson.co.uk
Dump each engine state when i915_gem_set_wedged() is called to give us
some more clues as to why we had to terminate the GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205092201.19476-5-chris@chris-wilson.co.uk
This will make it possible for userspace to know whether reading
will block, without blocking on the fd. This makes it possible to
drain all queued CRC's in blocking mode, without having to reopen
the fd.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202142743.68527-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[mlankhorst: Use POLLIN|POLLRDNORM, based on Ville's suggestion]
The headers should be on a separate line for consistency, so add the
missing trailing newline in a few intel_engine_dump() callers.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205100618.11001-1-chris@chris-wilson.co.uk
Since unbannable contexts are special and supposed not to be causing GPU
hangs in the first place, make it clear when they are implicated in said
hang. In practice, most unbannable contexts are those created by igt
for the express purpose of throwing untold thousands of hangs at the GPU
and wish to keep doing so to finish the test. Normally they are cleaned
up, but it's when they or the other unbannable kernel contexts stay
stuck in an erroneous state that we need to worry and so need
highlighting.
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205094139.10671-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
As we ourselves cancel interrupts during reset by clearing the GTIIR, it
is possible for the master IIR to indicate a pending IRQ for which we
have already cleared from the GTIIR. In this case, the DRM_ERROR are
intended and should not be flagged as an error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202153448.23908-1-chris@chris-wilson.co.uk
Be paranoid and flush the GTIIR after clearing the CS interrupt to be
sure it has taken before we re-enable the interrupt handler. We still
see early interrupts following reset, the tasklet handling the mmio read
before it has been written by the CS. This hopefully reduces the
frequency to 0...
References: https://bugs.freedesktop.org/show_bug.cgi?id=104262
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202145455.29876-1-chris@chris-wilson.co.uk
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-2-ville.syrjala@linux.intel.com
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> #irc
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-1-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We're using i915_inject_load_failure() to inject dummy
faults during driver load, but since this is debug utility
we shouldn't expose it in default config as it consumes
both code and data.
add/remove: 0/1 grow/shrink: 0/2 up/down: 0/-302 (-302)
Function old new delta
__i915_inject_load_failure 61 - -61
i915_gem_init 1331 1268 -63
i915_driver_load 5923 5745 -178
Total: Before=1177454, After=1177152, chg -0.03%
add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-4 (-4)
Data old new delta
i915_load_fail_count 4 - -4
Total: Before=56762, After=56758, chg -0.01%
add/remove: 4/8 grow/shrink: 0/1 up/down: 245/-591 (-346)
RO Data old new delta
__param_str_inject_load_failure 20 - -20
__UNIQUE_ID_inject_load_failuretype200 34 - -34
__param_inject_load_failure 40 - -40
__func__ 4998 4896 -102
__UNIQUE_ID_inject_load_failure201 150 - -150
Total: Before=119095, After=118749, chg -0.29%
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180201173248.3912-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We have the max DP link rate info available in VBT since BDB version
216, included in child device config since commit c4fb60b9ab
("drm/i915/bios: add DP max link rate to VBT child device
struct"). Parse it and use it.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8b1364d1f2394fba3062b6ad11b474744ea4366.1517482774.git.jani.nikula@intel.com
Make the limiting rate based instead of messing with the array size.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cb03b9419191a7d6359bf371aacb2d3725c746de.1517482774.git.jani.nikula@intel.com
This will be useful later on. Also move the functions around to not need
forward declarations in subsequent patches. No functional changes.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/40f37f08cad33234cd86337d39e823ac6e55805f.1517482774.git.jani.nikula@intel.com
gcc thinks that interpreting a multiplication result as a bool
is confusing:
drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c: In function 'read_pll':
drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c:133:8: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
Adding a temporary variable to contain the divisor helps make
it clear what is going on and avoids that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This adds the NvPmEnableGating config option to nouveau, which can be
used to enable or disable clockgating for supported chipsets. Enabling
can be done by passing
config=NvPmEnableGating=1
To nouveau. If your chipset supports it, you'll see a message in your
kernel log indicating that clockgating is enabled. Since clockgating has
only had limited testing thus far, we leave this option disabled by
default for now.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
That's right, there's still more power saving to go! Starting with
kepler 2, nvidia hardware has an additional level of clockgating known
as second level clockgating. The details of this are not exact, but it
seems to work by waiting for a collection of dependent hardware blocks
to be gated before taking affect. As with the previous series, this
results in another noticeable drop in power consumption and is
programmed in the same manner.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Same as the previous patch, but for Kepler2 now
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This enables BLCG optimization for kepler1. When using clockgating,
nvidia's firmware has a set of registers which are initially programmed
by the vbios with various engine delays and other mysterious settings
that are safe enough to bring up the GPU. However, the values used by
the vbios are more power hungry then they need to be, so the nvidia driver
writes it's own more optimized set of BLCG settings before enabling
CG_CTRL. This adds support for programming the optimized BLCG values
during engine/subdev init, which enables rather significant power
savings.
This introduces the nvkm_therm_clkgate_init() helper, which we use to
program the optimized BLCG settings before enabling clockgating with
nvkm_therm_clkgate_enable.
As well, this commit shares a lot more code with Fermi since BLCG is
mostly the same there as far as we can tell. In the future, it's likely
we'll reformat the clkgate_packs for kepler1 so that they share a list
of mmio packs with Fermi.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This adds support for enabling automatic clockgating on nvidia GPUs for
Kepler1. While this is not technically a clockgating level, it does
enable clockgating using the clockgating values initially set by the
vbios (which should be safe to use).
This introduces two therm helpers for controlling basic clockgating:
nvkm_therm_clkgate_enable() - enables clockgating through
CG_CTRL, done after initializing the GPU fully
nvkm_therm_clkgate_fini() - prepares clockgating for suspend or
driver unload
A lot of this code was originally going to be based off of fermi;
however it turns out that while Fermi's the first line of GPUs that
introduced this kind of power saving, Fermi requires more fine tuned
control of the CG_CTRL registers from the driver while reclocking that
we don't entirely understand yet.
For the simple parts we will be sharing with Fermi for certain however,
we at least add those into a new subdev/therm/gf100.h header.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We've still been directly using the legacy crtc gamma_set() hook even
after conversion to atomic modesetting.
For userspace clients this was fine, however, fbcon will use the atomic
property when it's running on an atomic driver, which means we miss its
colormap updates - which is particularly bad for 8bpp framebuffers!
This commit converts the driver to use the atomic property + the helper
function implementing the legacy hook on top of atomic.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80675
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For some reason forgotten by history, we've been using a 1025-entry LUT
mode, and sparsely filling it with the 256-entry LUT we're handed.
Until we land support for the full atomic colour management properties,
this commit switches to using the 257-entry mode to fix colour mapping
with depth 30 framebuffers.
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is what was done prior to the big refactor in kernel 3.8, and what
was done by xf86-video-nv. Experimentally, it seems like there's some
sort of issue with the high-res lut to be used there. Tested on G92.
This ends up mattering because fbcon/fbdev chooses the C8 fb format for
low-vram systems, which can occur with some IGP-based configurations
with little "stolen" vram.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80675
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It's entirely possibly that the other r375 code is relevant to r370 too,
but I've not confirmed this, so I'll leave it where it is for now.
NVIDIA's copyright headers maintained, as it's still all their code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Gourav Samaiya <gsamaiya@nvidia.com>
gcc-8 reports
drivers/gpu/drm/nouveau/nvkm/engine/pm/base.c: In function 'nvkm_perfmon_mthd':
include/linux/string.h:265:9: error: '__builtin_strncpy' specified bound 64 equals destination size [-Werror=stringop-truncation]
We need one less byte or call strlcpy() to make it a
nul-terminated string.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The kbuild test bot complained about a new coccinelle warning nearby,
which sparked a discussion about the assignment to 'memory' inside of
the conditional expression. See Link below for the original post.
Fix the assignment to silence the coccinelle warning and also make the
code look a little nicer.
Link: https://lists.freedesktop.org/archives/nouveau/2017-November/029242.html
Signed-off-by: Christoph Böhmwalder <christoph@boehmwalder.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Fixes failure to compile with recent envyas as a result of the 'movw'
alias being removed for v5.
A bit of history:
v3 only has a 16-bit sign-extended immediate mov op. In order to set
the high bits, there's a separate 'sethi' op. envyas validates that
the value passed to mov(imm) is between -0x8000 and 0x7fff. In order
to simplify macros that load both the low and high word, a 'movw'
alias was added which takes an unsigned 16-bit immediate. However the
actual hardware op still sign extends.
v5 has a full 32-bit immediate mov op. The v3 16-bit immediate mov op
is gone (loads 0 into the dst reg). However due to a bug in envyas,
the movw alias still existed, and selected the no-longer-present v3
16-bit immediate mov op. As a result usage of movw on v5 is the same
as mov with a 0x0 argument.
The proper fix throughout is to only ever use the 'movw' alias in
combination with 'sethi'. Anything else should get the sign-extended
validation to ensure that the intended value ends up in the
destination register.
Changes in fuc3 binaries is the result of a different encoding being
selected for a mov with an 8-bit value.
v2: added commit message written by Ilia, thanks for that!
v3: messed up rebasing, now it should apply
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-----BEGIN PGP SIGNATURE-----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=pLN1
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This seems to have been a comparatively quieter merge window, I assume
due to holidays etc. The "biggest" change is AMD header cleanups, which
merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
with the etnaviv driver wanting to reuse the code, hopefully other drivers
can go in the same direction.
Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
elsewhere.
Core:
- Add .last_close and .output_poll_changed helpers to reduce driver footprints
- Fix plane clipping
- Improved debug printing support
- Add panel orientation property
- Update edid derived properties at edid setting
- Reduction in fbdev driver footprint
- Move amdgpu scheduler into core for other drivers to use.
i915:
- Selftest and IGT improvements
- Fast boot prep work on IPS, pipe config
- HW workarounds for Cannonlake, Geminilake
- Cannonlake clock and HDMI2.0 fixes
- GPU cache invalidation and context switch improvements
- Display planes cleanup
- New PMU interface for perf queries
- New firmware support for KBL/SKL
- Geminilake HW workaround for perforamce
- Coffeelake stolen memory improvements
- GPU reset robustness work
- Cannonlake horizontal plane flipping
- GVT work
amdgpu/radeon:
- RV and Vega header file cleanups (lots of lines gone!)
- TTM operation context support
- 48-bit GPUVM support for Vega/RV
- ECC support for Vega
- Resizeable BAR support
- Multi-display sync support
- Enable swapout for reserved BOs during allocation
- S3 fixes on Raven
- GPU reset cleanup and fixes
- 2+1 level GPU page table
amdkfd:
- GFX7/8 SDMA user queues support
- Hardware scheduling for multiple processes
- dGPU prep work
rcar:
- Added R8A7743/5 support
- System suspend/resume support
sun4i:
- Multi-plane support for YUV formats
- A83T and LVDS support
msm:
- Devfreq support for GPU
tegra:
- Prep work for adding Tegra186 support
- Tegra186 HDMI support
- HDMI2.0 and zpos support by using generic helpers
tilcdc:
- Misc fixes
omapdrm:
- Support memory bandwidth limits
- DSI command mode panel cleanups
- DMM error handling
exynos:
- drop the old IPP subdriver.
etnaviv:
- Occlusion query fixes
- Job handling fixes
- Prep work for hooking in gpu scheduler
armada:
- Move closer to atomic modesetting
- Allow disabling primary plane if overlay is full screen
imx:
- Format modifier support
- Add tile prefetch to PRE
- Runtime PM support for PRG
ast:
- fix LUT loading"
* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
drm/ast: Load lut in crtc_commit
drm: Check for lessee in DROP_MASTER ioctl
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
...
to the clk rate protection support added by Jerome Brunet. This feature
will allow consumers to lock in a certain rate on the output of a clk so
that things like audio playback don't hear pops when the clk frequency
changes due to shared parent clks changing rates. Currently the clk
API doesn't guarantee the rate of a clk stays at the rate you request
after clk_set_rate() is called, so this new API will allow drivers
to express that requirement. Beyond this, the core got some debugfs
pretty printing patches and a couple minor non-critical fixes.
Looking outside of the core framework diff we have some new driver
additions and the removal of a legacy TI clk driver. Both of these hit
high in the dirstat. Also, the removal of the asm-generic/clkdev.h file
causes small one-liners in all the architecture Kbuild files. Overall, the
driver diff seems to be the normal stuff that comes all the time to
fix little problems here and there and to support new hardware.
Core:
- Clk rate protection
- Symbolic clk flags in debugfs output
- Clk registration enabled clks while doing bookkeeping updates
New Drivers:
- Spreadtrum SC9860
- HiSilicon hi3660 stub
- Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
- Amlogic Meson-AXG
- ASPEED BMC
Removed Drivers:
- TI OMAP 3xxx legacy clk (non-DT) support
- asm*/clkdev.h got removed (not really a driver)
Updates:
- Renesas FDP1-0 module clock on R-Car M3-W
- Renesas LVDS module clock on R-Car V3M
- Misc fixes to pr_err() prints
- Qualcomm MSM8916 audio fixes
- Qualcomm IPQ8074 rounded out support for more peripherals
- Qualcomm Alpha PLL variants
- Divider code was using container_of() on bad pointers
- Allwinner DE2 clks on H3
- Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
- Mediatek clk driver compile test support
- AT91 PMC clk suspend/resume restoration support
- PLL issues fixed on si5351
- Broadcom IProc PLL calculation updates
- DVFS support for Armada mvebu CPU clks
- Allwinner fixed post-divider support
- TI clkctrl fixes and support for newer SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABCAAGBQJac5vRAAoJEK0CiJfG5JUlUaIP/Riq0tbApfc4k4GMvSvaieR/
AwZFIMCxOxO+KGdUsBWj7UUoDfBYmxyknHZkVUA/m+Lm7cRH/YHHMghEceZLaBYW
zPQmDfkTl/QkwysXZMCw9vg4vO0tt5gWbHljQnvVhxVVTCkIRpaE8Vkktj1RZzpY
WU/TkvPbVGY3SNm504TRXKWC9KpMTEXVvzqlg6zLDJ/jE7PGzBKtewqMoLDCBH2L
q6b50BSXDo2Hep0vm6e5xneXKjLNR4kgN4PkbM4Yoi4iWLLbgAu79NfyOvvr/imS
HxOHRms9tejtyaiR6bQSF0pbLOERZ3QSbMFEbxdxnCTuPEfy3Nw/2W7mNJlhJa8g
EGLMnLL4WdloL4Z83dAcMrj9OmxYf7Yobf5dMidLrQT5EYuafdj0ParbI8TQpWSB
eTqaffSUGPE/7xuKouYBcbvocpXXWCcokrP/mEn3OEHXkIeeut1Jd3RmEvsi3gtJ
pNraJTIpvt4c05rj6yLUOhWfyqlA+fH3p4Fx3rrH1tmKEiG+lrhKoxF26uALZe0V
OvarhG+LPIE10pCIYlQjZjQVnYLGCxsGAIoK1uz7VYvFPh2T0cxQlzzeqFgrlTyN
32hMj3LhkQw82FG9xZqjTX1935R35mySRlx63x7HStI1YFief2X9+RHjJR/lofG0
nC0JWTp5sC/pKf54QBXj
=bGPp
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework has a handful of patches this time around, mostly
due to the clk rate protection support added by Jerome Brunet.
This feature will allow consumers to lock in a certain rate on the
output of a clk so that things like audio playback don't hear pops
when the clk frequency changes due to shared parent clks changing
rates. Currently the clk API doesn't guarantee the rate of a clk stays
at the rate you request after clk_set_rate() is called, so this new
API will allow drivers to express that requirement.
Beyond this, the core got some debugfs pretty printing patches and a
couple minor non-critical fixes.
Looking outside of the core framework diff we have some new driver
additions and the removal of a legacy TI clk driver. Both of these hit
high in the dirstat. Also, the removal of the asm-generic/clkdev.h
file causes small one-liners in all the architecture Kbuild files.
Overall, the driver diff seems to be the normal stuff that comes all
the time to fix little problems here and there and to support new
hardware.
Summary:
Core:
- Clk rate protection
- Symbolic clk flags in debugfs output
- Clk registration enabled clks while doing bookkeeping updates
New Drivers:
- Spreadtrum SC9860
- HiSilicon hi3660 stub
- Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
- Amlogic Meson-AXG
- ASPEED BMC
Removed Drivers:
- TI OMAP 3xxx legacy clk (non-DT) support
- asm*/clkdev.h got removed (not really a driver)
Updates:
- Renesas FDP1-0 module clock on R-Car M3-W
- Renesas LVDS module clock on R-Car V3M
- Misc fixes to pr_err() prints
- Qualcomm MSM8916 audio fixes
- Qualcomm IPQ8074 rounded out support for more peripherals
- Qualcomm Alpha PLL variants
- Divider code was using container_of() on bad pointers
- Allwinner DE2 clks on H3
- Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
- Mediatek clk driver compile test support
- AT91 PMC clk suspend/resume restoration support
- PLL issues fixed on si5351
- Broadcom IProc PLL calculation updates
- DVFS support for Armada mvebu CPU clks
- Allwinner fixed post-divider support
- TI clkctrl fixes and support for newer SoCs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: aspeed: Handle inverse polarity of USB port 1 clock gate
clk: aspeed: Fix return value check in aspeed_cc_init()
clk: aspeed: Add reset controller
clk: aspeed: Register gated clocks
clk: aspeed: Add platform driver and register PLLs
clk: aspeed: Register core clocks
clk: Add clock driver for ASPEED BMC SoCs
clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
clk: fix reentrancy of clk_enable() on UP systems
clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
clk: Simplify debugfs registration
clk: Fix debugfs_create_*() usage
clk: Show symbolic clock flags in debugfs
clk: renesas: r8a7796: Add FDP clock
clk: Move __clk_{get,put}() into private clk.h API
clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
clk: Improve flags doc for of_clk_detect_critical()
arch: Remove clkdev.h asm-generic from Kbuild
clk: sunxi-ng: a83t: Add M divider to TCON1 clock
clk: Prepare to remove asm-generic/clkdev.h
...
- Mask INTx from user if pdev->irq is zero (Alexey Kardashevskiy)
- Capability helper cleanup (Alex Williamson)
- Allow mmaps overlapping MSI-X vector table with region capability
exposing this feature (Alexey Kardashevskiy)
- mdev static cleanups (Xiongwei Song)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=Ww3n
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Mask INTx from user if pdev->irq is zero (Alexey Kardashevskiy)
- Capability helper cleanup (Alex Williamson)
- Allow mmaps overlapping MSI-X vector table with region capability
exposing this feature (Alexey Kardashevskiy)
- mdev static cleanups (Xiongwei Song)
* tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfio:
vfio: mdev: make a couple of functions and structure vfio_mdev_driver static
vfio-pci: Allow mapping MSIX BAR
vfio: Simplify capability helper
vfio-pci: Mask INTx if a device is not capabable of enabling it
There is no requirement for doing the PCODE request polling atomically,
so do that only for a short time switching to sleeping poll afterwards.
The specification requires a 150usec timeout for the change notification,
so let's use that for the atomic poll. Do the extra 2ms poll - needed as
a workaround on BXT/GLK - in sleeping mode.
v2:
- rebase on v2 of patchset dropping the sandybridge_pcode_read/write
refactoring (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-2-imre.deak@intel.com
Currently we see sporadic timeouts during CDCLK changing both on BXT and
GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by
changing the frequency in a tight loop after blanking the display. The
upper bound for the completion time is 800us based on my tests, so
increase it from the current 500us to 2ms; with that I couldn't trigger
the problem either on BXT or GLK.
Note that timeouts happened during both the change notification and the
voltage level setting PCODE request. (For the latter one BSpec doesn't
require us to wait for completion before further HW programming.)
This issue is similar to
commit 2c7d0602c8 ("drm/i915/gen9: Fix PCODE polling during CDCLK
change notification")
but there the PCODE request does complete (as shown by the mbox
busy flag), only the reply we get from PCODE indicates a failure.
So there we keep resending the request until a success reply, here we
just have to increase the timeout for the one PCODE request we send.
v2:
- s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com
Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with reworks
to try to attempt to make the code easier to handle in the long run, but
no functional change. There's also some tree-wide sysfs attribute
fixups with lots of acks from the various subsystem maintainers, as well
as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
s6ygQPQhZIjKk2Lxa2hC
=Zihy
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with
reworks to try to attempt to make the code easier to handle in the
long run, but no functional change. There's also some tree-wide sysfs
attribute fixups with lots of acks from the various subsystem
maintainers, as well as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
device property: Define type of PROPERTY_ENRTY_*() macros
device property: Reuse property_entry_free_data()
device property: Move property_entry_free_data() upper
firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
USB: serial: keyspan: Drop firmware Kconfig options
sysfs: remove DEBUG defines
sysfs: use SPDX identifiers
drivers: base: add coredump driver ops
sysfs: add attribute specification for /sysfs/devices/.../coredump
test_firmware: fix missing unlock on error in config_num_requests_store()
test_firmware: make local symbol test_fw_config static
sysfs: turn WARN() into pr_warn()
firmware: Fix a typo in fallback-mechanisms.rst
treewide: Use DEVICE_ATTR_WO
treewide: Use DEVICE_ATTR_RO
treewide: Use DEVICE_ATTR_RW
sysfs.h: Use octal permissions
component: add debugfs support
bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
...
Previously, we relied on only running the hangcheck while somebody was
waiting on the GPU, in order to minimise the amount of time hangcheck
had to run. (If nobody was watching the GPU, nobody would notice if the
GPU wasn't responding -- eventually somebody would care and so kick
hangcheck into action.) However, this falls apart from around commit
4680816be3 ("drm/i915: Wait first for submission, before waiting for
request completion"), as not all waiters declare themselves to hangcheck
and so we could switch off hangcheck and miss GPU hangs even when
waiting under the struct_mutex.
If we enable hangcheck from the first request submission, and let it run
until the GPU is idle again, we forgo all the complexity involved with
only enabling around waiters. We just have to remember to be careful that
we do not declare a GPU hang when idly waiting for the next request to
be come ready, as we will run hangcheck continuously even when the
engines are stalled waiting for external events. This should be true
already as we should only be tracking requests submitted to hardware for
execution as an indicator that the engine is busy.
Fixes: 4680816be3 ("drm/i915: Wait first for submission, before waiting for request completion"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104840
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129144104.3921-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 889230489b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In case of eDP because the panel has a fixed mode, the link rate
and lane count at which it is trained corresponds to the link BW
required to support the native resolution of the panel. In case of
panles with lower resolutions where fewer lanes are hooked up internally,
that number is reflected in the MAX_LANE_COUNT DPCD register of the panel.
So it is pointless to fallback to lower link rate/lane count in case
of link training failure on eDP connector since the lower link BW
will not support the native resolution of the panel and we cannot
prune the preferred mode on the eDP connector.
In case of Link training failure on the eDP panel, something is wrong
in the HW internally and hence driver errors out with a loud
and clear DRM_ERROR message.
v2:
* Fix the DEBUG_ERROR and add {} in else (Ville Syrjala)
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=103369
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507835618-23051-1-git-send-email-manasi.d.navare@intel.com
(cherry picked from commit c0cfb10d9e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We may have fused or unused pipes in our system. Let's check that the pipe
in question is within limits of accessible pipes. In case, that we are not
able to access the pipe, we return early with a warning.
v2: Rephrasing of the commit message (Jani)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103206
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jaswinder Singh Rajput <jaswinder@perfectintelligent.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513584243-12607-1-git-send-email-mika.kahola@intel.com
(cherry picked from commit 0b7029b7e4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
As we attempt to allocate pages for use in a new WC stash, direct
reclaim may run underneath us and fill up the WC stash. We have to be
careful then not to overflow the pvec.
Fixes: 66df1014ef ("drm/i915: Keep a small stash of preallocated WC pages")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103109
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180121173143.17090-1-chris@chris-wilson.co.uk
(cherry picked from commit 073cd78166)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since commit 4e773c3a8a ("drm/i915: Wire up shrinkctl->nr_scanned"),
we track the number of objects we scan and do not wish to exceed that as
it will overly penalise our own slabs under mempressure. Given that we
now know the target number of objects to scan, use that as our guide for
deciding to shrink as opposed to the number of objects we manage to
shrink (which doesn't correspond to the numbers we report to shrinkctl).
Fixes: 4e773c3a8a ("drm/i915: Wire up shrinkctl->nr_scanned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115212455.24046-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 29d384e34c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stop gvt scheduler timer if no vGPU exists, otherwise it keeps
gvt service thread busy to handle request schedule event but no
actual schedule activity required.
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stop irq timer for virtual vblank timer emulation if no vGPU exists,
otherwise it will keep gvt service thread busy to handle virtual vblank
but no use.
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
According to commit (319c933c71)
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Aug 15 00:02:46 2013 +0200
drm/prime: proper locking+refcounting for obj->dma_buf link
obj->dma_buf link should be reinstated at import time.
Gvt-g dma-buf buffer exposeing might be simpler, as there won't be much
racing during Gvt-g dma-buf exposing. In other words, Gvt-g dma-buf
exposing can guarantee exposing happens before gem close ioctl, and Gvt-g
is the only exporter of the guest framebuffer.
But following the drm prime scheme can give Gvt-g a chance to increase a
dma-buf reference count during importing. Otherwise, we have to increase
the reference during exposing, which will break the case that the only
reference userspace has held was through the dma-buf fd and the reference
count is one.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Hang Yuan <hang.yuan@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We have a hole in our busy-stat accounting if the pmu is enabled during
a long running batch, the pmu will not start accumulating busy-time
until the next context switch. This then fails tests that are only
sampling a single batch.
v2: Count each active port just once (context in/out events are only on
the first and last assignment to a port).
v3: Avoid hardcoding knowledge of 2 submission ports
Fixes: 30e17b7847 ("drm/i915: Engine busy time tracking")
Testcase: igt/perf_pmu/busy-start
Testcase: igt/perf_pmu/busy-double-start
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111073031.14614-1-chris@chris-wilson.co.uk
(cherry picked from commit 4900727d35)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This register does not contain it. Instead, we have to look into FAULT_TLB_DATA0 & 1
(where, by the way, we can also get the address space).
v2: Right formatting
v3:
- Use 12 (as per the register format) instead of PAGE_SIZE (Chris)
- s/BITS_44_TO_47/HIGHBITS (Chris)
- Right formatting, this time for real
Fixes: b03ec3d67a ("drm/i915: There is only one fault register from GEN8 onwards")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1513982329-32191-1-git-send-email-oscar.mateo@intel.com
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 5a3f58dfd1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
While moving code around for solving lockdep issue for GuC log relay,
spotted that uc_fini_wq is not being called in failure path in gem_init.
Missed in the below commit. Add it.
v2: Removed GEM_BUG_ON(!HAS_GUC()) from intel_uc_fini_wq as init happens
only based on enable_guc module parameter and does not consider has_guc
capability. (Michal)
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Fixes: 3176ff49bc ("drm/i915/guc: Move GuC workqueue allocations outside of the mutex")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515588857-10283-1-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit da943b5ab0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The power domain masks are 64 bit wide, so we need BIT_ULL() when
setting bits in them, these ones were missed during converting from 32
to 64 bit masks. All 3 enums are <32 atm, so this didn't cause a real
problem.
Fixes: d8fc70b736 ("drm/i915: Make power domain masks 64 bit long")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109122040.19425-1-imre.deak@intel.com
(cherry picked from commit 17bd6e66d8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The ACK/NACK implementation as found in e.g. the G965 has the falling
clock edge and the release of the data line after the ACK for the received
byte happen at the same time.
This is conformant with the I2C specification, which allows a zero hold
time, see footnote [3]: "A device must internally provide a hold time of
at least 300 ns for the SDA signal (with respect to the V IH(min) of the
SCL signal) to bridge the undefined region of the falling edge of SCL."
Some HDMI-to-VGA converters apparently fail to adhere to this requirement
and latch SDA at the falling clock edge, so instead of an ACK
sometimes a NACK is read and the slave (i.e. the EDID ROM) ends the
transfer.
The bitbanging releases the data line for the ACK only 1/4 bit time after
the falling clock edge, so a slave will see the correct value no matter
if it samples at the rising or the falling clock edge or in the center.
Fallback to bitbanging is already done for the CRT connector.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92685
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/a39f080b-81a5-4c93-b3f7-7cb0a58daca3@rwthex-w2-a.rwth-ad.de
(cherry picked from commit cfb926e148)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The mocs reg array is defined locally but then we iterate over its
elements using I915_NUM_ENGINES. There is no 'hard' connection between
I915_NUM_ENGINES and the regs array and there will be problems if either
of them increases.
Use the size of the mocs reg array instead to safely iterate over it.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Weinan Li <weinan.z.li@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GVT may receive partial write on one guest PTE update. Validate gfn
not to translate incomplete gfn. This avoids some unnecessary error
messages incurred by the incomplete gfn translating. Also fix the
bug that the whole PPGTT shadow page update is aborted on any invalid
gfn entry.
gfn validation relys on hypervisor's help. Add one MPT module function
to provide the function.
Signed-off-by: Hang Yuan <hang.yuan@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Running 4.15 Linux kernel in VM will cause host GVT reports
'untrack mmio 0x701a0' errror, which identifies the PLANE_KEYMAX
registers. Add them to track list.
v2: rebase to latest staging code.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
while(mmio++) increase mmio to next, mmio[0] never take effect
in while loop.
This patch change while to for and fix the above issue.
v2: Correct Fixes format.(Zhenyu)
v3: Rebase to latest staging.(Zhenyu)
Fixes: 83164886e455("drm/i915/gvt: Select appropriate mmio list at initialization time")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In the past the ast driver relied upon the fbdev emulation helpers to
call ->load_lut at boot-up. But since
commit b8e2b0199c
Author: Peter Rosin <peda@axentia.se>
Date: Tue Jul 4 12:36:57 2017 +0200
drm/fb-helper: factor out pseudo-palette
that's cleaned up and drivers are expected to boot into a consistent
lut state. This patch fixes that.
Fixes: b8e2b0199c ("drm/fb-helper: factor out pseudo-palette")
Cc: Peter Rosin <peda@axenita.se>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Cc: Bill Fraser <bill.fraser@gmail.com>
Reported-and-Tested-by: Bill Fraser <bill.fraser@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
another one when waiting for timeouts on reservation objects.
-----BEGIN PGP SIGNATURE-----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=h8qb
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
This contains a fix to restrict what lessee can do with masters and
another one when waiting for timeouts on reservation objects.
* tag 'drm-misc-next-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc:
drm: Check for lessee in DROP_MASTER ioctl
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
Pull misc vfs updates from Al Viro:
"All kinds of misc stuff, without any unifying topic, from various
people.
Neil's d_anon patch, several bugfixes, introduction of kvmalloc
analogue of kmemdup_user(), extending bitfield.h to deal with
fixed-endians, assorted cleanups all over the place..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
alpha: osf_sys.c: use timespec64 where appropriate
alpha: osf_sys.c: fix put_tv32 regression
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
dcache: delete unused d_hash_mask
dcache: subtract d_hash_shift from 32 in advance
fs/buffer.c: fold init_buffer() into init_page_buffers()
fs: fold __inode_permission() into inode_permission()
fs: add RWF_APPEND
sctp: use vmemdup_user() rather than badly open-coding memdup_user()
snd_ctl_elem_init_enum_names(): switch to vmemdup_user()
replace_user_tlv(): switch to vmemdup_user()
new primitive: vmemdup_user()
memdup_user(): switch to GFP_USER
eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget()
eventfd: fold eventfd_ctx_read() into eventfd_read()
eventfd: convert to use anon_inode_getfd()
nfs4file: get rid of pointless include of btrfs.h
uvc_v4l2: clean copyin/copyout up
vme_user: don't use __copy_..._user()
usx2y: don't bother with memdup_user() for 16-byte structure
...
This enables the Mesa driver to advertise support for ARB_timer_query,
and thus an OpenGL version higher than 3.2.
Based on the CNL patch by Nanley Chery.
v2: Rebase.
Cc: Anuj Phogat <anuj.phogat@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Requested-by: Anuj Phogat <anuj.phogat@intel.com>
Tested-by: Anuj Phogat <anuj.phogat@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-10-paulo.r.zanoni@intel.com
This patch clears a single bit. The bit is 0 by default but expected
not to be set. Explicitly clearing the bit in this patch is intended
to indicate some thinking has occurred, and that we want this bit
cleared and we are not just excepting the default value.
We also stop setting GFX_RUN_LIST_ENABLE, which is correct since that
bit is gone.
v2 (from Paulo): fix indentation.
v3: Changed GEN check to >= 11. Corrected author name.
v4 (from Paulo): improve commit message (Daniele).
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Kelvin Gardiner <kelvin.gardiner@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-9-paulo.r.zanoni@intel.com
ICL+ adds changes the PLANE_CTL_FORMAT field from [27:24] to [27:23],
however, all existing PLANE_CTL_FORMAT_* definitions still map to the
correct values. Add an ICL_PLANE_CTL_FORMAT_MASK definition, and use
that for masking for the conversion to fourcc.
v2: No changes
v3: Change new definition name, drop comment (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-8-paulo.r.zanoni@intel.com
This patch introduce MBus control registers and their bit-fields
MBUS_ABOX_CTL
MBUS_BBOX_CTL
MBUS_DBOX_CTL
MBUS_UBOX_CTL
Changes Since V1:
- Use function like macros (Paulo)
- fix copy-paste error (Paulo)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-6-paulo.r.zanoni@intel.com
We don't have planar pixel format support implemented for ICL yet.
ICL require 2 display planes to be allocated for Planar formats unlike
previous GEN. So ICL/GEN11 doesn't require to write Y-plane ddb data in
NV12_BUF_CFG register and PLANE_NV12_BUF_CFG register is removed in ICL.
This patch removes the PLANE_NV12_BUF_CFG write for ICL.
Changes Since V1:
- Improve commit message as per Paulo's comment
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-5-paulo.r.zanoni@intel.com
ICL require DDB allocation of plane to be more than "minimum display
buffer needed" for each level in order to enable WM level.
This patch implements and consider the same while allocating DDB
and enabling WM.
Changes Since V1:
- rebase
Changes Since V2:
- Remove extra parentheses
- Use FP16.16 only when absolutely necessary (Paulo)
Changes Since V3:
- Rebase
Changes since v4 (from Paulo):
- Coding style issue.
Changes since v5 (from Paulo):
- Do the final checks according to BSpec.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-4-paulo.r.zanoni@intel.com
GEN9/10 had fixed DBuf block size of 512. Dbuf block size is not a
fixed number anymore in GEN11, it varies according to bits per pixel
and tiling. If 8bpp & Yf-tile surface, block size = 256 else block
size = 512
This patch addresses the same.
v2 (from Paulo):
- Make it compile.
- Fix a few coding style issues.
v3:
- Rebase on top of upstream patches
v4 (from Paulo):
- Bikeshed if statements (James).
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-3-paulo.r.zanoni@intel.com
GEN9 onwards bypass path allocation of 4 blocks was needed, as per
hardware design. ICL doesn't require bypass path allocation of 4 DDB
blocks, handling the same in this patch.
v2 (from Paulo):
- No need for a comment that says what the code already says.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-2-paulo.r.zanoni@intel.com
This is a precautionary measure as I have no evidence to suggest we've
hit a bug here (I was hoping this might explain gdg's odd behaviour, but
alas), but given that we have a function to flush the ggtt writes it
seems prudent to use it prior to changing the fence register. Due to the
intrinsic nature of the GTT often operating as an independent mmio path,
we should not just rely on the write to the fence acting as a full flush
for GTT writes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130164457.14037-1-chris@chris-wilson.co.uk
guc_log_relay_file_create will return -EEXIST if we invoke
relay_late_setup_files multiple times as part of i915_guc_log_control.
However this is to be not cosidered as fail and need to return 0.
This was mistakenly introduced in the below commit. Fix it.
Fixes: 70deeaddc6 "drm/i915/guc: Fix lockdep due to log relay channel handling under struct_mutex"
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1517379279-12967-1-git-send-email-sagar.a.kamble@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Previously, we relied on only running the hangcheck while somebody was
waiting on the GPU, in order to minimise the amount of time hangcheck
had to run. (If nobody was watching the GPU, nobody would notice if the
GPU wasn't responding -- eventually somebody would care and so kick
hangcheck into action.) However, this falls apart from around commit
4680816be3 ("drm/i915: Wait first for submission, before waiting for
request completion"), as not all waiters declare themselves to hangcheck
and so we could switch off hangcheck and miss GPU hangs even when
waiting under the struct_mutex.
If we enable hangcheck from the first request submission, and let it run
until the GPU is idle again, we forgo all the complexity involved with
only enabling around waiters. We just have to remember to be careful that
we do not declare a GPU hang when idly waiting for the next request to
be come ready, as we will run hangcheck continuously even when the
engines are stalled waiting for external events. This should be true
already as we should only be tracking requests submitted to hardware for
execution as an indicator that the engine is busy.
Fixes: 4680816be3 ("drm/i915: Wait first for submission, before waiting for request completion"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104840
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129144104.3921-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Don't let a lessee control what the current DRM master is set to;
that's the job of the "real" master. Otherwise, the lessee would
disable all access to master operations for the owner and all lessees
under it.
This matches the same check made in the SET_MASTER ioctl.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: 2ed077e467 ("drm: Add drm_object lease infrastructure [v5]")
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119015159.1606-1-keithp@keithp.com
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
On CNL SKUs that uses port F, max DP rate is 8.1G for all
ports when we have the elevated voltage (higher than 0.85V).
v2: Make commit message more generic.
v3: Move conditions to a helper to get easier to read. (Ville).
v4: Add a mention to the numerical voltage on commit
message per Manasi request.
v5: Thanks CI! "error: control reaches end of non-void function"
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-10-rodrigo.vivi@intel.com
Now let's finish the Port-F support by adding the
proper port F detection, irq and power well support.
v2: Rebase
v3: Use BIT_ULL
v4: Cover missed case on ddi init.
v5: Update commit message.
v6: Rebase on top of display headers rework.
v7: Squash power-well handling related to DDI F to this
patch to avoid warns as pointed out by DK.
v8: Introduce DDI_F_LANES to PG2. (DK)
v9: Squash in the PORT_F case for enabling DP MST encoder. (DK)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-9-rodrigo.vivi@intel.com
On CNP boards that are using DDI F,
bit 25 (SDE_PORTE_HOTPLUG_SPT) is representing
the Digital Port F hotplug line when the Digital
Port F hotplug detect input is enabled.
v2: Reuse all existent structure instead of adding a
new HPD_PORT_F pointing to pin of port E.
v3: Use IS_CNL_WITH_PORT_F so we can start upstreaming
this right now. If that SKU ever get a proper name
we come back and update it.
v4: Rebase on top of digital connected port using encoder
instead of port.
v5: Moved IS_CNL_WITH_PORT_F definition to the PCI IDs patch.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-8-rodrigo.vivi@intel.com
Let's try to simplify this mapping to hpd_pin -> bit
instead using port.
So for CNL with port F where we have this port using
hdp_pin and bits of other ports we don't need to duplicated
the mapping.
But for now this is only a re-org with no functional change
expected.
v2: Add missing lines and nuke @port reference from code
documentation. (Ville)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-7-rodrigo.vivi@intel.com
On CNP Pin 3 is for misc of Port F usage depending on the
configuration. For CNL that uses Port F, pin 3 is the one.
v2: Make it more generic and update commit message.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-6-rodrigo.vivi@intel.com
Since when it got introduced with commit '555e38d27317
("drm/i915/cnl: DDI - PLL mapping")' the support for Port F
was wrong, because Port F bits are far from bits used
for A to E.
Since Port F is not used so far we don't need to propagate
Fixes back there.
v2: Reuse _SHIFT definition to avoid complicated duplication (DK).
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-5-rodrigo.vivi@intel.com
This was wrong since its introduction on commit '04416108ccea
("drm/i915/cnl: Add registers related to voltage swing sequences.")'
But since no Port F was needed so far we don't need to
propagate fixes back there.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-4-rodrigo.vivi@intel.com
On some Cannonlake SKUs we have a dedicated Aux for port F,
that is only the full split between port A and port E.
There is still no Aux E for Port E, as in previous platforms,
because port_E still means shared lanes with port A.
v2: Rebase.
v3: Add couple missed PORT_F cases on intel_dp.
v4: Rebase and fix commit message.
v5: Squash Imre's "drm/i915: Add missing AUX_F power well string"
v6: Rebase on top of display headers rework.
v7: s/IS_CANNONLAKE/IS_CNL_WITH_PORT_F (DK)
v8: Fix Aux bits for Port F (DK)
v9: Fix VBT definition of Port F (DK).
v10: Squash power well addition to this patch to avoid
warns as pointed by DK.
v11: Clean up squashed commit message. (David)
v12: Remove unnecessary handling for older platforms (DK)
Adding AUX_F to PG2 following other existent ones. (DK)
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-2-rodrigo.vivi@intel.com
The only difference is that this SKUs has the full
Port A/E split named as Port F.
But since SKUs differences don't matter on the platform
definition group and ids, let's merge all off them together.
v2: Really include the PCI IDs to the picidlist[];
v3: Add the PCI Id for another SKU (Anusha).
v4: Update IDs, really include to pciidlists again.
v5: Unify all GT2 IDs.
v6: Unify in a way that we don't break early-quirks.c
v7: Remove GT reference since it doesn't matter here (Paulo)
Also move IS_CNL_WITH_PORT_F macro to this patch to
make it easier for review this part and also to get
used sooner.
v8: Rebased on top of commit 5db47e37b3 ("Revert "drm/i915:
mark all device info struct with __initconst"")
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-1-rodrigo.vivi@intel.com
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130100528.GA7154@training
The parentheses are in the wrong place here so we pass the bits per
pixel as zero.
Fixes: abbee62387 ("drm/mgag200: Added resolution and bandwidth limits for various G200e products.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125142655.GA23885@mwanda
drm_encoder_slave is the old way to write bridge drivers, for i2c
bridges only. It's deprecated, and definitely should not be used in
new drivers. This has absolutely nothing to do with the new bridge
driver infrastructure implemented by drm_bridge.
What's even strange is that arcpgu doesn't even use any of this, it
really only wants a plain normal drm_encoder. Nuke all the surplus
real estate.
v2: Actually git add after compile testing ...
v3: Clarify commit message and stop including drm_encoder_slave.h.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117141755.16933-1-daniel.vetter@ffwll.ch
Userspace can set a FB_ID on a plane without setting CRTC_ID, which
will fail with -EINVAL, but the kernel shouldn't warn about that.
Same for !FB_ID and CRTC_ID being set.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130102704.28016-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
While running the kms_plane clipping test I noticed a similar problem to
the one described in Display WA #1175. In this case, similarly for
planes other than the cursor, with 1 or 3 pixels visible from the left
edge of the screen to the end of the plane and an odd plane X offset
used for clipping causes the same kind of underflow and display
corruption as described for WA #1175. Fix this in a similar way as that
WA rejecting planes ending <4 pixels from the left screen edge.
v2:
- Rebase on v2 of patch 1/1.
Testcase: igt/kms_plane/plane-clipping-pipe-*-planes
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180116112415.22060-2-imre.deak@intel.com
As described in the WA on GLK and CNL planes on the right edge of the
screen that have less than 4 pixels visible from the beginning of the
plane to the edge of the screen can cause FIFO underflow and display
corruption.
On GLK/CNL I could trigger the problem only if the plane was at the same
time also aligned to the top edge of the screen (after clipping) and
there were exactly 2 pixels visible from the start of the plane to the
right edge of the screen (so couldn't trigger it with 1 or 3 pixels
visible). Nevertheless, to be sure, I also applied the WA for these cases.
I also couldn't see any problem with the cursor plane and later Art
confirmed that it's not affected, so the WA is applied only for the
other plane types.
v2:
- Use -ERANGE instead of -EINVAL. (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180116112415.22060-1-imre.deak@intel.com
The dw_mipi_dsi_host_transfer() must return the number of
bytes transmitted/received on success instead of 0.
Note: As the read feature is not implemented, only the
transmitted number of bytes is returned for the moment.
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125103800.1999-3-philippe.cornu@st.com
The dcs/generic dsi read feature is not yet implemented so it
is important to warn the host_transfer() caller in case of
read operation requests.
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125103800.1999-2-philippe.cornu@st.com
To optimize data transfers, align pitch on 128 bytes & height
on 4 bytes. This optimization is not applicable on hw without MMU.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130104200.21602-1-philippe.cornu@st.com
During a non-blocking commit, it is possible to return before the
commit_tail work is queued (-ERESTARTSYS, for example).
Since a reference on the crtc commit object is obtained for the pending
vblank event when preparing the commit, the above situation will leave
us with an extra reference.
Therefore, if the commit_tail worker has not consumed the event at the
end of a commit, release it's reference.
Changes since v1:
- Also check for state->event->base.completion being set, to
handle the case where stall_checks() fails in setup_crtc_commit().
Changes since v2:
- Add a flag to drm_crtc_commit, to prevent dereferencing a freed event.
i915 may unreference the state in a worker.
Fixes: 24835e442f ("drm: reference count event->completion")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com> #v1
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117115108.29608-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Sean Paul <seanpaul@chromium.org>
The CGCG feature on Stoney is causing GFX related
issues such as freezes and blank outs.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Arindam Nath <arindam.nath@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the variable that was most recently initialized.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x, y, f, g, e, m;
statement S1,S2,S3,S4;
@@
x = f(...);
if (\(<+...x...+>\&e\)) S1 else S2
(
x = g(...);
|
m = g(...,&x,...);
|
y = g(...);
*if (e)
S3 else S4
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
It can easily be that the VM is already destroyed when this runs.
v2: fix test inversion
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vm pointer can become invalid as soon as the lock is released.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The root PD can be evicted directly after allocating it, just validate
it on first use.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It must use queue id 0, because CGPG_IDLE/SAVE/LOAD/RUN only can be issued on
queue 0.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The buf pointer was not being incremented inside the loop
meaning the same block of data would be read or written
repeatedly.
(v2) Change 'buf' pointer to uint8_t* type
Cc: stable@vger.kernel.org
Fixes: 09ac4fcb3f ("drm/ttm: Implement vm_operations_struct.access v2")
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missed in the patche:
dc94777 drm/ttm: enable swapout for reserved BOs during allocation.
don't unreserve the BO if it is not reserved by itself.
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the table result is out of bounds on the array map
there is something really wrong with VBT pin so we don't
return that vbt_pin, but only return 0 instead.
This basically reverts commit 'a8e6f3888b05 ("drm/i915/cnp:
Ignore VBT request for know invalid DDC pin.")'
Also this properly fixes commit 9c3b2689d0 ("drm/i915/cnl:
Map VBT DDC Pin to BSpec DDC Pin.")
v2: Do in a way that we don't break other platforms. (Jani)
v3: Keep debug message (Jani)
v4: Don't mess with 0 mapping was noticed by Jani and
addressed with a simple solution suggested by Lucas
that makes this even simpler.
Fixes: a8e6f3888b ("drm/i915/cnp: Ignore VBT request for know invalid DDC pin.")
Fixes: 9c3b2689d0 ("drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.")
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Kai Heng Feng <kai.heng.feng@canonical.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125222524.22059-1-rodrigo.vivi@intel.com
We never support certain mode flags etc. Reject those early on in the
mode_config.mode_valid() hook. That allows us to remove some duplicated
checks from the connector .mode_valid() hooks, and it guarantees that
we never see those flags even from user mode as the
mode_config.mode_valid() hooks gets executed for those as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-11-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Allow drivers to provide a device wide .mode_valid() hook in addition to
the already existing crtc/encoder/bridge/connector hooks. This can be
used to validate device/driver wide constraings without having to add
those to the other hooks. And since we call this hook also for user
modes later on in the modeset we don't have to worry about anything the
hook has already rejected.
I also have some further ideas for this hook. Eg. we could replace the
drm_mode_set_crtcinfo(HALVE_V) call in drm_mode_convert_umode()/etc.
with a driver specific variant via this hook. At least on i915 we would
like to pass CRTC_STEREO_DOUBLE to that function instead, and then
we could safely use the crtc_ timings in all our .mode_valid() hooks,
which would allow us to reuse those hooks for validating the
adjusted_mode during a modeset.
v2: Fix the language fails in the kernel docs (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-10-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For some reason drm_mode_set_crtcinfo() does nothing if the mode has
the DRM_MODE_TYPE_BUILTIN flag set without the other bit from
DRM_MODE_TYPE_CRTC_C also set. I have zero idea what that is supposed
to achieve, but since we have no users for neither flag bit let's kill
this nonsense off.
v2: Fix typo in commit message
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-7-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Currently userspace is allowed to feed in any king of garbage in the
high bits of the mode flags/type, as are drivers when probing modes.
Reject any mode with bogus flags/type.
Hopefully this won't break any current userspace...
v2: Split the type and flags checks to separates ifs (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115154913.23827-1-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Currently we don't sanity check the 3D stereo flags for modes filled out
by the kernel. Move the check from drm_mode_convert_umode() into
drm_mode_validate_basic() so that we get the same check going both ways.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-2-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
We use 32bit bitmasks to track planes/crtcs/encoders/connectors.
Naturally we can only do that if the index of those objects stays
below 32. Issue a warning whenever we exceed that limit, hopefully
prompting someone to fix the problem.
For connectors the issue is a bit more complicated as they can
be created/destroyed at runtime due to MST. So the problem is no
longer a purely theoretical programmer error. As the connector
indexes are allocated via ida, we can simply limit the maximum
value the ida is allowed to hand out. The error handling is already
in place.
v2: Return an error to the caller (Harry)
v3: Print a debug message so that we know what happened (Maarten)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125133020.23845-1-ville.syrjala@linux.intel.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Assert that we do not try to unsubmit a completed request, as should we
try to resubmit it later, the ring is already past the request's
breadcrumb and the breadcrumb will not be updated.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129094912.14428-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Older gcc is complaining it can't follow the guards and thinks that
addr may be used uninitialised
In the process, we can simplify down to one loop,
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-131 (-131)
Function old new delta
setup_scratch_page 545 414 -131
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129102840.19901-1-chris@chris-wilson.co.uk
There's a bunch of drivers that duplicate the same function to know if a
particular format embeds an alpha component or not.
Let's create a field in the drm_format_info to avoid duplicating that logic
and looking up formats all the time.
Cc: Eric Anholt <eric@anholt.net>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9cd9951d147ff810c1f6f68d79e7983361ed6b68.1516617243.git-series.maxime.ripard@free-electrons.com
There is a difference between the panel/bridge requested pixel clock
value and the real one due to the hw platform clock preciseness (pll,
dividers...). This patch updates the adjusted_mode clock value with
the real hw clock value so then attached encoder & connector can use
it for precise timing computations.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125160101.9102-1-philippe.cornu@st.com
Remove the WARN_ON(ce->state) inside the static function only called
when ce->state == NULL and downgrade the w/a batch setup warning into a
developer only mode (GEM_WARN_ON).
v2: Move the deferred alloc guard into the callee, eliminating the need
for the WARN_ON:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-1 (-1)
Function old new delta
execlists_context_pin 1819 1818 -1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180126121846.12007-1-chris@chris-wilson.co.uk
For a while we've been having issues with seemingly random interrupts
coming from nvidia cards when resuming them. Originally the fix for this
was thought to be just re-arming the MSI interrupt registers right after
re-allocating our IRQs, however it seems a lot of what we do is both
wrong and not even nessecary.
This was made apparent by what appeared to be a regression in the
mainline kernel that started introducing suspend/resume issues for
nouveau:
a0c9259dc4 (irq/matrix: Spread interrupts on allocation)
After this commit was introduced, we started getting interrupts from the
GPU before we actually re-allocated our own IRQ (see references below)
and assigned the IRQ handler. Investigating this turned out that the
problem was not with the commit, but the fact that nouveau even
free/allocates it's irqs before and after suspend/resume.
For starters: drivers in the linux kernel haven't had to handle
freeing/re-allocating their IRQs during suspend/resume cycles for quite
a while now. Nouveau seems to be one of the few drivers left that still
does this, despite the fact there's no reason we actually need to since
disabling interrupts from the device side should be enough, as the
kernel is already smart enough to know to disable host-side interrupts
for us before going into suspend. Since we were tearing down our IRQs by
hand however, that means there was a short period during resume where
interrupts could be received before we re-allocated our IRQ which would
lead to us getting an unhandled IRQ. Since we never handle said IRQ and
re-arm the interrupt registers, this would cause us to miss all of the
interrupts from the GPU and cause our init process to start timing out
on anything requiring interrupts.
So, since this whole setup/teardown every suspend/resume cycle is
useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor
functions instead so they're only called at driver load and driver
unload. This should fix most of the issues with pending interrupts on
resume, along with getting suspend/resume for nouveau to work again.
As well, this probably means we can also just remove the msi rearm call
inside nvkm_pci_init(). But since our main focus here is to fix
suspend/resume before 4.15, we'll save that for a later patch.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
CTX_CONTEXT_CONTROL (CTX_SR_CTL) operates as a masked register and so
will only apply the bits that are selected by the upper half. In the
case of selectively enabling sr inhibit, this may mean the context keeps
the current setting (so forgetting to save the context later, eventually
leading to a very upset GPU!).
Fixes: 517aaffe0c ("drm/i915/execlists: Inhibit context save/restore for the fake preempt context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125112443.12745-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
One fixes a NULL dereference, and the other fixes
a flickering bug.
Cc: Eric Anholt <eric@anholt.net>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlpo1gAACgkQlvcN/ahK
Bwp8Dwf/cOHYKoyKmzzMNy4Myrsf0I8cF4efL9f1xw7Y/m/pp7c6Nxdfj0TCmVpd
AmLuxg8rSYrfdnzY5KZ/9nr8RYiWmnX5VIt8VapbZyWF20UUyqilPepHsBrI8lig
rczaOJ8kWL7FDHqXM0CXHQc6mhd7lqKXNfaAwUE3cE9yAve/4tTytrRBXzuhmMmH
AQYsf0Y7v4rv+4SJEZM4UA2n8+TV4WaY1nqjED37lIdApqntL9hR8056lpevWT3W
GgrakE8mZVFTu5KGIBCvZy3yehO/KJ0RIKvPwXJC9e8SMEcP35NuLw0+CetcNTrL
MYure0STUMH0VR9wGLKOh2+bn1106g==
=NPug
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Two vc4 fixes that were applied in the last day.
One fixes a NULL dereference, and the other fixes
a flickering bug.
Cc: Eric Anholt <eric@anholt.net>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
* tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc:
drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state()
drm/vc4: Flush the caches before the bin jobs, as well.
Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.
-----BEGIN PGP SIGNATURE-----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=NLL4
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Fixes for 4.16:
Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.
* tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc:
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/panel: lvds: Handle the optional regulator case properly
drm/sun4i: Fix error code in sun4i_tcon_bind()
A few more fixes for 4.16, nothing major.
A few more fixes for 4.16. This is on top of the pull request from
last week. Most notable change here is a fix to the link order for
the now separate from amdgpu GPU scheduler to fix crashes when the
modules are build into the kernel rather than as modules.
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux:
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
drm/amdgpu: fix amdgpu_vm_pasid_fault_credit
drm/ttm: check the return value of register_shrinker
drm/radeon: fix sparse warning: Should it be static?
It should initialize before the drivers using it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104736
Reviewed-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I assumed wrongfully that all relevant functions should be implemented.
Apparently this isn't the case. Demote the print to debug level for now.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use consistent multi-line comment style as per guideline.
v2: Reverted comments prefix update to kernel-doc comment. (Chris)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-5-git-send-email-sagar.a.kamble@intel.com
i915_guc_log_control is GuC interface and GuC APIs that are not user
facing should be named with "intel_guc" prefix hence we change name to
intel_guc_log_control. Also changed the parameter to intel_guc struct.
v2: Move log vma check to intel_guc_log_control (Michal)
Return -ENODEV when log isn't initialized. (Chris)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-4-git-send-email-sagar.a.kamble@intel.com
GuC log streaming needs interrupts enabled prior to GuC resume but
runtime pm interrupt setup was happening post GuC resume. Fix it.
While at it, fix the unwinding of steps in the runtime suspend path.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104695
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-2-git-send-email-sagar.a.kamble@intel.com
Disabling GuC interrupts involves access to GuC IRQ control registers
hence ensure device is RPM awake.
v1-v2: old changelog
1: Add comment about need to synchronize flush work and log runtime
destroy
2: Moved patch earlier in the series and removed comment about future
work. (Tvrtko)
v3: Added assert_rpm_wakelock_held() to gen9_*_guc_interrupts. (Chris)
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1516808821-3638-1-git-send-email-sagar.a.kamble@intel.com
Let's document why we claim hsub==8,vsub==16 for CCS.
v2: Replace my explanation with Jason's
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119144152.17224-1-ville.syrjala@linux.intel.com
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Apparently SKL/KBL/CFL need some manual help to get the
programmed HDMI vswing to stick. Implement the relevant
workaround (display w/a #1143).
Note that the relevant chicken bits live in a transcoder register
even though the bits affect a specific DDI port rather than a
specific transcoder. Hence we must pick the correct transcoder
register instance based on the port rather than based on the
cpu_transcoder.
Also note that for completeness I included support for DDI A/E
in the code even though we never have HDMI on those ports.
v2: CFL needs the w/a as well (Rodrigo and Art)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Art Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122174131.28046-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Replace the ad-hoc plane indexing scheme used by the frontbuffer
tracking with enum plane_id.
The old video overlay not being part of the plane_id namespace
will just be given the high bit.
v2: Drop the unintended whitespace change (Chris)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123183343.9181-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
When we finally decide the gpu is idle, that is a good time to shrink
our kmem_caches.
v3: Defer until an rcu grace period after we idle.
v4: Think about epoch wraparound and how likely that is.
v5: Use I915_EPOCH_INVALID magic.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180124113608.14909-2-chris@chris-wilson.co.uk
By counting the number of times we have woken up, we have a very simple
means of defining an epoch, which will come in handy if we want to
perform deferred tasks at the end of an epoch (i.e. while we are going
to sleep) without imposing on the next activity cycle.
v2: No reason to specify precise number of bits here.
v3: Take Tvrtko's advice and reserve 0 as an invalid epoch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180124113608.14909-1-chris@chris-wilson.co.uk
We only use the preempt context to inject an idle point into execlists.
We never need to reference its logical state, so tell the GPU never to
load it or save it.
v2: BIT(2) for save-inhibit.
N.B. Daniele mentioned this bit mbz for ICL, and has been moved into the
submission process rather than the context image.
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123210412.17653-1-chris@chris-wilson.co.uk
Newer platforms may have subtle offset changes, which will increase the
number of defines, so it is probably better to start moving them to its
own header file. Also move the macros used while setting the reg state.
v2: Rename to intel_lrc_reg.h, to be consistent with i915_reg.h and
intel_guc_reg.h (Chris)
v3: License notice shenanigans.
v4: Documentation/process/coding-style.rst is always right (Chris)
v5: Rebase.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180124004349.22126-2-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
The macros we use to init the reg_state had the following issues reported
by checkpatch --strict.
Macro argument reuse 'reg_state' - possible side-effects
Macro argument reuse 'pos' - possible side-effects
Macro argument reuse 'ppgtt' - possible side-effects
spaces preferred around that '+' (ctx:VxV)
So fix these issues before they are moved to a new header file.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180124004349.22126-1-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We need to generate the event config value using the uAPI class and not
the driver internal one.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 109ec55837 ("drm/i915/pmu: Only enumerate available counters in sysfs")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123134558.3222-1-tvrtko.ursulin@linux.intel.com
Current code always select _CNL_AUX_ANAOVRD1_B
register regardless the pw in use.
CNL_DISP_PW_AUX_B = 9
CNL_DISP_PW_AUX_C = 10
CNL_DISP_PW_AUX_D = 11
And for pick we want
B = 0
C = 1
D = 2
Fixes: ddd39e4b3f ("drm/i915/cnl: apply Display WA #1178 to fix type C dongles")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123215245.24026-1-rodrigo.vivi@intel.com
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-15-ville.syrjala@linux.intel.com
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-14-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
v2: Rebase due to tegra_plane_state_add() relocating to plane.c
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-13-ville.syrjala@linux.intel.com
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-12-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-11-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-10-ville.syrjala@linux.intel.com
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-9-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-8-ville.syrjala@linux.intel.com
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-7-ville.syrjala@linux.intel.com
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-6-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-5-ville.syrjala@linux.intel.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-4-ville.syrjala@linux.intel.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
No functional changes since pipe_src_w/h are already filled via
drm_mode_get_hv_timing().
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
In order to guarantee that pipe_src_w/h matches the user mode h/vdisplay
we must not adjust pipe_src_w to accommodate double wide/dual link.
Instead just reject the mode outright.
This will allows us to rely on crtc_state->mode for plane clipping.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
We only support vga_switcheroo and runtime pm on PX/HG systems
so forcing runpm to 1 doesn't do anything useful anyway.
Only call vga_switcheroo_init_domain_pm_ops() for PX/HG so
that the cleanup path is correct as well. This mirrors what
radeon does as well.
v2: rework the patch originally sent by Lukas (Alex)
Acked-by: Lukas Wunner <lukas@wunner.de>
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de> (v1)
Cc: stable@vger.kernel.org
Fixes the following build warnings:
In file included from ../drivers/gpu/drm/sun4i/sun8i_mixer.h:18:0,
from ../drivers/gpu/drm/sun4i/sun8i_vi_scaler.h:13,
from ../drivers/gpu/drm/sun4i/sun8i_vi_scaler.c:12:
../drivers/gpu/drm/sun4i/sunxi_engine.h:36:16: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *old_state);
^~~~~~~~~~~~~~
../drivers/gpu/drm/sun4i/sunxi_engine.h:53:15: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *state);
^~~~~~~~~~~~~~
In file included from ../drivers/gpu/drm/sun4i/sun8i_mixer.h:18:0,
from ../drivers/gpu/drm/sun4i/sun8i_ui_scaler.h:12,
from ../drivers/gpu/drm/sun4i/sun8i_ui_scaler.c:12:
../drivers/gpu/drm/sun4i/sunxi_engine.h:36:16: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *old_state);
^~~~~~~~~~~~~~
../drivers/gpu/drm/sun4i/sunxi_engine.h:53:15: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *state);
^~~~~~~~~~~~~~
Fixes: 6b8562c86e ("drm/sun4i: engine: Create an atomic_begin
callback")
Fixes: 656e5f6549 ("drm/sun4i: engine: Add a custom crtc
atomic_check")
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122174306.231609-1-seanpaul@chromium.org
Add Polaris version check if firmware support UVD encode
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Otherwise it keeps rejecting the reset.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we can read the CSB from the HWSP, we may avoid having to
perform mmio reads entirely and so forgo the rigmarole of the forcewake
dance.
v2: Include forcewake hint for GEM_TRACE readback of mmio. If we don't
hold fw ourselves, the reads may return garbage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122100714.15137-1-chris@chris-wilson.co.uk
On gen9+, after an idle period the HW will disable the entire power well
to conserve power (by preventing current leakage). It takes around a 100
microseconds to bring the power well back online afterwards. With the
current hysteresis value of 25us (really 25 * 1280ns), we do not have
sufficient time to respond to an interrupt and schedule the next execution
before the HW powers itself down. (At present, we prevent this by
grabbing the forcewake for prolonged periods of time, but that overkill
fixed in the next patch.) The minimum we want to set the power gating
hysteresis to is the length of time it takes us to service the GPU, which
across a broad spectrum of machines is about 250us.
(Note this also brings guc latency into the same ballpark as execlists.)
v2: Include some notes on where I plucked the numbers from.
Testcase: igt/gem_exec_nop/sequential
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122135541.32222-1-chris@chris-wilson.co.uk
We fail engine initialization if the scratch VMA cannot be created so
there is no point in error handle it later. If the initialization ordering
gets messed up, we can explode during development just as well.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119100005.9072-2-tvrtko.ursulin@linux.intel.com
Render engine constructor helpers must only be called from the render
engine constructors, but there is no need to burden the production
binaries with warnings which can only be triggered during development.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119100005.9072-1-tvrtko.ursulin@linux.intel.com
In case of eDP because the panel has a fixed mode, the link rate
and lane count at which it is trained corresponds to the link BW
required to support the native resolution of the panel. In case of
panles with lower resolutions where fewer lanes are hooked up internally,
that number is reflected in the MAX_LANE_COUNT DPCD register of the panel.
So it is pointless to fallback to lower link rate/lane count in case
of link training failure on eDP connector since the lower link BW
will not support the native resolution of the panel and we cannot
prune the preferred mode on the eDP connector.
In case of Link training failure on the eDP panel, something is wrong
in the HW internally and hence driver errors out with a loud
and clear DRM_ERROR message.
v2:
* Fix the DEBUG_ERROR and add {} in else (Ville Syrjala)
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=103369
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507835618-23051-1-git-send-email-manasi.d.navare@intel.com
If we try to read the backend registers while it fetches the new values, we
end up with the value of some random register instead of the one we asked
for.
In order to prevent that, let's make sure that the very first thing we do
during our atomic modesetting is to let the commit bit come to a rest.
We don't have to worry about anything else since the only time we will
trigger a new transaction is during the atomic_commit which comes much
later.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/35604307e5bde2b85c674de79fa7c4d55700f085.1516613040.git-series.maxime.ripard@free-electrons.com
Now that we have everything in place, we can start enabling the frontend.
This is more difficult than one would assume since there can only be one
plane using the frontend per-backend.
We therefore need to make sure that the userspace will not try to setup
multiple planes using it, since that would be impossible. In order to
prevent that, we can create an atomic_check callback that will check that
only one plane will effectively make use of the frontend in a given
configuration, and will toggle the switch in that plane state so that the
proper setup function can do their role.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/278e6c514a8311750fe627c7f28d58b3e2cbd825.1516613040.git-series.maxime.ripard@free-electrons.com
Now that we have a driver, we can make use of it. This is done by
adding a flag to our custom plane state that will trigger whether we should
use the frontend on that particular plane or not.
The rest is just plumbing to set up the backend to not perform the DMA but
receive its data from the frontend.
Note that we're still not making any use of the frontend itself, as no one
is setting the flag yet.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cdffc25eab2d817820cc78cbd24f1f4b99902014.1516613040.git-series.maxime.ripard@free-electrons.com
We have some restrictions on what the planes and CRTC can provide that are
tied to only one generation of display engines.
For example, on the first generation, we can only have one YUV plane or one
plane that uses the frontend output.
Let's allow our engines to provide an atomic_check callback to validate the
current configuration.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e5f5f144e5c20d348cdb29933ae876c105bec017.1516613040.git-series.maxime.ripard@free-electrons.com
The function converting the DRM format to its equivalent in the backend
registers was assuming that we were having a plane.
However, we might want to use that function when setting up a plane using
the frontend, in which case we will not have a plane associated to the
backend's layer. Yet, we still need to setup the format to the one output
by the frontend.
Test for NULL plane pointers before referencing them, so that we can work
around it.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bfbe4c2e8525a7542526b648d59a8f3546e905f1.1516613040.git-series.maxime.ripard@free-electrons.com
MMHUB power gating still has issue, and doesn't work on raven at current. So
disable it for the moment.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If we fail to allocate a new request, make sure we recover the pages
that are in the process of being freed by inserting an RCU barrier.
v2: Comment before the shrink and barrier in the error path.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119144657.22606-1-chris@chris-wilson.co.uk
It looks that GuC log functionality is not fully functional yet and
causes issues when enabled by auto(-1) modparam on debug builds.
For example, but not limited to:
[ 30.062893] ======================================================
[ 30.062894] WARNING: possible circular locking dependency detected
[ 30.062895] 4.15.0-rc8-CI-CI_DRM_3648+ #1 Tainted: G U
[ 30.062896] ------------------------------------------------------
[ 30.062897] debugfs_test/1268 is trying to acquire lock:
[ 30.062898] (&dev->struct_mutex){+.+.}, at: [<00000000e4213449>] i915_mutex_lock_interruptible+0x47/0x130 [i915]
[ 30.062921]
but task is already holding lock:
[ 30.062921] (&mm->mmap_sem){++++}, at: [<00000000dd7adc93>] __do_page_fault+0x106/0x560
[ 30.062924]
which lock already depends on the new lock.
References: 0ed8795353 ("drm/i915/guc: Redefine guc_log_level modparam values")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104693
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104694
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104695
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119124926.29844-1-michal.wajdeczko@intel.com
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Gen11 removes the Resource Streamer, which frees up a big chunk of
the context image. BSpec indicates 12544 DWORDs (13 pages), plus
one page for PPHWSP.
Please notice that, when looking at the BSpec context image table,
the right filter has to be applied as some rows are excluded for
specific GENs. Also, some rows apply per-subslice (for the
calculation above, we have supposed I915_MAX_SUBSLICES = 8).
v2: Rebase.
v3: Use the right size as per the BSpec.
v4:
- Rebased on top of the default context size (Rodrigo)
- Clarify in the commit message where the subslice calculation
comes from.
v5: s/12538/12544/ (Daniele)
BSpec: 18907
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ben Widawsky <benjamin.widawsky@intel.com> (older version)
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515711307-28979-2-git-send-email-oscar.mateo@intel.com
Instead of returning whatever size the latest GEN used. This is because
context sizes for new GENs can go up or down, but the only safe thing to
do for missing cases is to use the largest known one, whatever that is.
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515711307-28979-1-git-send-email-oscar.mateo@intel.com
MMIO addresses and register definition for the new interrupt
registers in Gen11.
v2: Removed spelt out VCS and VECS bit definitions. (Daniel Vetter)
v3: Adjust VCS and VECS. (Daniele Ceraolo Spurio)
v4: Bikeshedding (Paulo).
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109232336.11029-5-paulo.r.zanoni@intel.com
In ICP, there are three TC ports and 3 DDI ports.
v2:
- Correct Pin mapping.
v3:
- Update pin mapping into per platform implementation
rather than previous approach of port wise mapping.
v4:
- Update GMBUS_NUM_PINS (Paulo)
v5:
- rebase.
v6:
- Update function name, GMBUS_PIN_NUM (Paulo)
v7 (from Paulo):
- Make it apply.
v8 (from Paulo):
- Maintain consistent if ladder ordering.
Suggested by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-8-paulo.r.zanoni@intel.com
ICP has two backlight controllers - similar to previous platforms like
BXT -, but we only use one controller for now, so we can just reuse
the CNP code.
v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani)
Reuse CNP code since it is very similar.(Ville)
v3 (from Paulo): Rebase.
v4 (from Paulo): adjust commit message (James) and comment (Rodrigo).
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119184812.2888-1-paulo.r.zanoni@intel.com
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
ICP, like BXT, has has two panel power sequencers.
v2: Simplify the code. Remove unwanted register definitions.
Make code as close to BXT style as possible. (Ville)
Also, remove the use of ICP_SECOND_PPS_BACKLIGHT for now.
Moving forward, if we are sure we need to set this register,
we can access it.
v3: Use INTEL_GEN(dev_priv), make code more readeable. (Ville)
v4 (from Paulo):
- Coding style fixes.
- Add a missing HAS_PCH_CNP -> gen10+ check.
- Rebase.
v5: Use per platform checks rather than INTEL_GEN().
v4 of this patch breaks on CoffeeLake, since CFL uses
CNP and per platform check makes sense in that case.
v6 (from Paulo):
- v5 was a patch on top of v4, not a new version. Now v6 is correctly
a new version of the original patch.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-6-paulo.r.zanoni@intel.com
Add register definitions for setting the rawclock.
Set the numerator,denominator and divider values.
v2: Simplify the commit message. Simplify the math.
Add register bits for numerator. (Paulo)
v3 (from Paulo): coding style bikesheds.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-5-paulo.r.zanoni@intel.com
Add the enum additions to ICP PCH.
v2 (from Paulo): don't set any platforms to it yet since ICP support is
incomplete.
v3 (from Rodrigo): Fix ICP name.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-4-paulo.r.zanoni@intel.com
Icelake is an Intel® Processor containing an Intel® Graphics
Controller.
This is just an initial Icelake definition. PCI IDs, Icelake support
and new features coming in following patches.
v2: Add .ddb_size and .has_guc (Michal Wajdeczko).
v3: Add the ICL_FEATURES macro (Kelvin Gardiner).
v4 (from Paulo): Add missing __initconst (Paulo) and say "graphics
controller" instead of something that looks like an official marketing
name but isn't (Chris).
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-3-paulo.r.zanoni@intel.com
Some Cannonlake SKUs will come with a full split between
port A and port E. This will be called port F although it
is not a 6th port, but only a split.
Note this patch alone is not sufficient for port F enabling,
it's just the first step.
v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.
v6 (from Paulo): improve commit message, bikeshed bit definitions.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-2-paulo.r.zanoni@intel.com
It's been a while since we've backmerged drm-next. Dave just brought
back 4.15-rc8, so now's a good time to freshen things up around here.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
We may have fused or unused pipes in our system. Let's check that the pipe
in question is within limits of accessible pipes. In case, that we are not
able to access the pipe, we return early with a warning.
v2: Rephrasing of the commit message (Jani)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103206
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jaswinder Singh Rajput <jaswinder@perfectintelligent.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513584243-12607-1-git-send-email-mika.kahola@intel.com
SKL+ "sprites" no longer have 16KB max stride limit that earlier
platforms had. Bump up the limit to 32KB.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Allow sprites to scan out compressed framebuffers.
Since different platforms have a different set of planes that
support CCS let's add a small helper to determine whether a
specific plane supports CCS or not. Currently that information
is spread around in many places, and not all the pieces of
code even agree with each other.
In addition to allowing sprites to scan out compressed fbs,
the other fix here is that we stop rejecting them on pipe C
on CNL.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Split the g4x and snb cases into separate functions to match how we deal
with all other platforms. Also sort the switch cases to match the format
lists we've declared earlier, to ease comparisons.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-5-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Y/Yf were dropped out from the SKL+ sprite modifier list on account
of some watermark issues Daniel Stone was having. My subsequent testing
seemed to indicate that things work better now, so add the modifiers
back in.
v2: Update the commit message with a better explanation
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The unreachable() is very much unreachable and the compiler knows
that, so there's no point in having it.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
4K modes testing by using dummy EDID data has never been working
properly on boxes with DP++ (dual-mode) adaptors. The reason for
this is that those modes got pruned during hdmi mode validation.
intel_hdmi_mode_valid returns CLOCK_HIGH because the pixel clock
reported by the 4k mode is higher than dual port TMDS clock limit.
However 4k injection does work properly on machines that don't have
DP++ adapters because the mode is never validated against the DP++
TMDS clock limit.
v2: Don't detect the DP++ limits when we're testing using overridden
EDIDs. Make sure to check for the override condition after
respecting the value of drm_dp_dual_mode_detect (Jani Nikula).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101649
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171215102055.11729-1-abdiel.janulgue@linux.intel.com
drm_edid_to_eld() sets ELD connector type since commit 1d1c366507
("drm/edid: set ELD connector type in drm_edid_to_eld()"). Remove the
redundant update.
(Commit c945b8c14b ("drm/edid: build ELD in drm_add_edid_modes()") and
commit d471ed04b4 ("drm/drivers: drop redundant drm_edid_to_eld()
calls") are also related.)
v2: Rebase, update commit message with commit references.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171229125547.28672-1-jani.nikula@intel.com
follow-up fix
-----BEGIN PGP SIGNATURE-----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=PwII
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Display corruption regression bugfix with both a prep patch and a
follow-up fix
* tag 'drm-intel-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Redo plane sanitation during readout
drm/i915: Add .get_hw_state() method for planes
Thought I'd try my luck getting one more in:
- Two fixes for Tegra (one is to common code, but our userspace doesn't hit it).
- One for NV5x-class MCPs
* 'linux-4.15' of git://github.com/skeggsb/linux:
drm/nouveau/mmu/mcp77: fix regressions in stolen memory handling
drm/nouveau/bar/gk20a: Avoid bar teardown during init
drm/nouveau/drm/nouveau: Pass the proper arguments to nvif_object_map_handle()
- Fixes addition of stolen memory base address to PTEs.
- Removes support for compression.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Commit bbb163e189 ("drm/nouveau/bar: implement bar1 teardown")
introduced add a teardown helper function for BAR1. During
initialisation of the Nouveau, initially all the teardown helpers are
called once, before calling their init counterparts. For gk20a, after
the BAR1 teardown function is called, the device is hanging during the
initialisation of the FB sub-device. At this point it is unclear why
this is happening and this is still under investigation. However, this
change is preventing Tegra124 devices from booting when Nouveau is
enabled. To allow Tegra124 to boot, remove the teardown helper for
gk20a.
This is based upon a previous patch by Guillaume Tucker but limits
the workaround to only gk20a GPUs.
Fixes: bbb163e189 ("drm/nouveau/bar: implement bar1 teardown")
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is obviously wrong in the current code. Make sure to record the
correct size of the arguments and pass the actual arguments to the
nvif_object_map_handle() function.
Suggested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
HDCP compliant Repeaters can support max of 127 devices and max
depth of 7 for downstream topology.
If these max limits are exceeded, repeater will set the
topology error flags MAX_CASCADE_EXCEEDED and/or MAX_DEVS_EXCEEDED
in Bstatus followed by asserting READY/CP_IRQ for HDCP transmitter.
This patch check for these error flags as soon as READY bit is asserted.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
[seanpaul fixed checkpatch alignment issue]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1516254488-4971-5-git-send-email-ramalingam.c@intel.com
Second stage of HDCP authentication starts at CP_IRQ or at the
assertion of READY bit from Repeater.
Till then repeater will be authenticating with its downstream devices.
So authenticated device count, depth and ksv_list readable from
repeaters are valid only after assertion of READY/CP_IRQ.
This patch makes sure that READY is polled before reading any
topology information.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1516254488-4971-4-git-send-email-ramalingam.c@intel.com
If ttm_bo_swapout doesn't own the lock, don't release it. Someone
else probably depends on it still being locked.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A BO that's already swapped would be added back to the swap-LRU list
for example if its validation failed under high memory pressure. This
could later lead to swapping it out again and leaking previous swap
storage.
This commit adds a condition to prevent that from happening.
v2: Check page_flags instead of swap_storage
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
RV doesn't support it.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The handle describes kernel logical address, should be
unsigned long and not uint32_t.
Fixes KASAN error and GFP on driver unload.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
add this for correctly updating global mem count in ttm_mem_zone.
before that when ttm_mem_global_alloc_page fails, we would update all
dma_page's global mem count in ttm_dma->pages_list. but actually here
we should not update for the last dma_page.
v2: only the update of last dma_page is not right
v3: use lower bits of dma_page vaddr
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When saving BOs in the hang state we skip one entry of the
kernel_state->bo[] array, thus leaving it to NULL. This leads to a NULL
pointer dereference when, later in this function, we iterate over all
BOs to check their ->madv state.
Fixes: ca26d28bba ("drm/vc4: improve throughput by pipelining binning and rendering jobs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118145821.22344-1-boris.brezillon@free-electrons.com
If the frame samples from a render target that was just written, its
cache flush during the binning step may have occurred before the
previous frame's RCL was completed. Flush the texture caches again
before starting each RCL job to make sure that the sampling of the
previous RCL's output is correct.
Fixes flickering in the top left of 3DMMES Taiji.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: ca26d28bba ("drm/vc4: improve throughput by pipelining binning and rendering jobs")
Link: https://patchwork.freedesktop.org/patch/msgid/20171221221722.23809-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Update VBT defs to reflect revision 216. While at it, default the
expected child device struct size to sizeof the size rather than a
hardcoded value.
v2: Fix bit order (David)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118153310.32437-1-jani.nikula@intel.com
Display WA #1178 is meant to fix Aux channel voltage swing too low with
some type C dongles. Although it is for type C, HW engineers reported
that it can be applied to all external ports even if they are not going
to type C.
For CNL we apply the workaround every time Aux B, C and D are powering
up since they will lose the configuration when powered down.
v2: Use common tag for WA
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171128220553.22435-1-lucas.demarchi@intel.com
Chris Wilson