When adding a tick dependency to a task, its necessary to
wake up the CPU where the task resides to reevaluate tick
dependencies on that CPU.
However the current code wakes up all nohz_full CPUs, which
is unnecessary.
Switch to waking up a single CPU, by using ordering of writes
to task->cpu and task->tick_dep_mask.
[ mingo: Minor readability edit. ]
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-7-frederic@kernel.org
CONFIG_NO_HZ_FULL behaves just like CONFIG_NO_HZ_IDLE by default.
Reassure distros about it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-6-frederic@kernel.org
The idle_exittime field of tick_sched is used to record the time when
the idle state was left. but currently the idle_exittime is updated in
the function tick_nohz_restart_sched_tick(), which is not always in idle
state when nohz_full is configured:
tick_irq_exit
tick_nohz_irq_exit
tick_nohz_full_update_tick
tick_nohz_restart_sched_tick
ts->idle_exittime = now;
It's thus overwritten by mistake on nohz_full tick restart. Move the
update to the appropriate idle exit path instead.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-5-frederic@kernel.org
The vtime_accounting_enabled_this_cpu() early check already makes what
follows as dead code in the case of CONFIG_VIRT_CPU_ACCOUNTING_NATIVE.
No need to keep the ifdeferry around.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-4-frederic@kernel.org
In nohz_full mode, switching from idle to a task will unconditionally
issue a tick restart. If the task is alone in the runqueue or is the
highest priority, the tick will fire once then eventually stop. But that
alone is still undesired noise.
Therefore, only restart the tick on idle exit when it's strictly
necessary.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-3-frederic@kernel.org
RTC drivers used to leave .set_alarm() NULL in order to signal the RTC
device doesn't support alarms. The drivers are now clearing the
RTC_FEATURE_ALARM bit for that purpose in order to keep the rtc_class_ops
structure const. So now, .set_alarm() is set unconditionally and this
possibly causes the alarmtimer code to select an RTC device that doesn't
support alarms.
Test RTC_FEATURE_ALARM instead of relying on ops->set_alarm to determine
whether alarms are available.
Fixes: 7ae41220ef ("rtc: introduce features bitfield")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511014516.563031-1-alexandre.belloni@bootlin.com
This reverts commit dcd42591eb.
The only user was RCU/nocb.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
- Add idle states table for IceLake-D to the intel_idle driver and
update IceLake-X C6 data in it (Artem Bityutskiy).
- Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
drop the unused do_idle() firmware call from it (Dmitry Osipenko).
- Fix cpuidle-qcom-spm Kconfig entry (He Ying).
- Fix handling of possible negative tick_nohz_get_next_hrtimer()
return values of in cpuidle governors (Rafael Wysocki).
- Add support for frequency-invariance to the ACPI CPPC cpufreq
driver and update the frequency-invariance engine (FIE) to use it
as needed (Viresh Kumar).
- Simplify the default delay_us setting in the ACPI CPPC cpufreq
driver (Tom Saeger).
- Clean up frequency-related computations in the intel_pstate
cpufreq driver (Rafael Wysocki).
- Fix TBG parent setting for load levels in the armada-37xx
cpufreq driver and drop the CPU PM clock .set_parent method for
armada-37xx (Marek Behún).
- Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
- Fix handling of dev_pm_opp_of_cpumask_add_table() return values
in cpufreq-dt to take the -EPROBE_DEFER one into acconut as
appropriate (Quanyang Wang).
- Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
- Drop the unused for_each_policy() macro from cpufreq (Shaokun
Zhang).
- Simplify computations in the schedutil cpufreq governor to avoid
unnecessary overhead (Yue Hu).
- Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Fix cpufreq documentation links in Kconfig (Alexander Monakov).
- Fix PCI device power state handling in pci_enable_device_flags()
to avoid issuse in some cases when the device depends on an ACPI
power resource (Rafael Wysocki).
- Add missing documentation of pm_runtime_resume_and_get() (Alan
Stern).
- Add missing static inline stub for pm_runtime_has_no_callbacks()
to pm_runtime.h and drop the unused try_to_freeze_nowarn()
definition (YueHaibing).
- Drop duplicate struct device declaration from pm.h and fix a
structure type declaration in intel_rapl.h (Wan Jiabing).
- Use dev_set_name() instead of an open-coded equivalent of it in
the wakeup sources code and drop a redundant local variable
initialization from it (Andy Shevchenko, Colin Ian King).
- Use crc32 instead of md5 for e820 memory map integrity check
during resume from hibernation on x86 (Chris von Recklinghausen).
- Fix typos in comments in the system-wide and hibernation support
code (Lu Jialin).
- Modify the generic power domains (genpd) code to avoid resuming
devices in the "prepare" phase of system-wide suspend and
hibernation (Ulf Hansson).
- Add Hygon Fam18h RAPL support to the intel_rapl power capping
driver (Pu Wen).
- Add MAINTAINERS entry for the dynamic thermal power management
(DTPM) code (Daniel Lezcano).
- Add devm variants of operating performance points (OPP) API
functions and switch over some users of the OPP framework to
the new resource-managed API (Yangtao Li and Dmitry Osipenko).
- Update devfreq core:
* Register devfreq devices as cooling devices on demand (Daniel
Lezcano).
* Add missing unlock opeation in devfreq_add_device() (Lukasz
Luba).
* Use the next frequency as resume_freq instead of the previous
frequency when using the opp-suspend property (Dong Aisheng).
* Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
* Fix set_freq path for the userspace governor in Kconfig (Dong
Aisheng).
* Remove invalid description of get_target_freq() (Dong Aisheng).
- Update devfreq drivers:
* imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
of_match_ptr() (Dong Aisheng, Fabio Estevam).
* rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
references to undefined symbols (Enric Balletbo i Serra, Gaël
PORTAY).
* rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
Kozlowski).
* imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
- Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
- Fix typo in the pm-graph utility code (Ricardo Ribalda).
-----BEGIN PGP SIGNATURE-----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=t+SG
-----END PGP SIGNATURE-----
Merge tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add some new hardware support (for example, IceLake-D idle
states in intel_idle), fix some issues (for example, the handling of
negative "sleep length" values in cpuidle governors), add new
functionality to the existing drivers (for example, scale-invariance
support in the ACPI CPPC cpufreq driver) and clean up code all over.
Specifics:
- Add idle states table for IceLake-D to the intel_idle driver and
update IceLake-X C6 data in it (Artem Bityutskiy).
- Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
drop the unused do_idle() firmware call from it (Dmitry Osipenko).
- Fix cpuidle-qcom-spm Kconfig entry (He Ying).
- Fix handling of possible negative tick_nohz_get_next_hrtimer()
return values of in cpuidle governors (Rafael Wysocki).
- Add support for frequency-invariance to the ACPI CPPC cpufreq
driver and update the frequency-invariance engine (FIE) to use it
as needed (Viresh Kumar).
- Simplify the default delay_us setting in the ACPI CPPC cpufreq
driver (Tom Saeger).
- Clean up frequency-related computations in the intel_pstate cpufreq
driver (Rafael Wysocki).
- Fix TBG parent setting for load levels in the armada-37xx cpufreq
driver and drop the CPU PM clock .set_parent method for armada-37xx
(Marek Behún).
- Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
- Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
cpufreq-dt to take the -EPROBE_DEFER one into acconut as
appropriate (Quanyang Wang).
- Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
- Drop the unused for_each_policy() macro from cpufreq (Shaokun
Zhang).
- Simplify computations in the schedutil cpufreq governor to avoid
unnecessary overhead (Yue Hu).
- Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Fix cpufreq documentation links in Kconfig (Alexander Monakov).
- Fix PCI device power state handling in pci_enable_device_flags() to
avoid issuse in some cases when the device depends on an ACPI power
resource (Rafael Wysocki).
- Add missing documentation of pm_runtime_resume_and_get() (Alan
Stern).
- Add missing static inline stub for pm_runtime_has_no_callbacks() to
pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
(YueHaibing).
- Drop duplicate struct device declaration from pm.h and fix a
structure type declaration in intel_rapl.h (Wan Jiabing).
- Use dev_set_name() instead of an open-coded equivalent of it in the
wakeup sources code and drop a redundant local variable
initialization from it (Andy Shevchenko, Colin Ian King).
- Use crc32 instead of md5 for e820 memory map integrity check during
resume from hibernation on x86 (Chris von Recklinghausen).
- Fix typos in comments in the system-wide and hibernation support
code (Lu Jialin).
- Modify the generic power domains (genpd) code to avoid resuming
devices in the "prepare" phase of system-wide suspend and
hibernation (Ulf Hansson).
- Add Hygon Fam18h RAPL support to the intel_rapl power capping
driver (Pu Wen).
- Add MAINTAINERS entry for the dynamic thermal power management
(DTPM) code (Daniel Lezcano).
- Add devm variants of operating performance points (OPP) API
functions and switch over some users of the OPP framework to the
new resource-managed API (Yangtao Li and Dmitry Osipenko).
- Update devfreq core:
* Register devfreq devices as cooling devices on demand (Daniel
Lezcano).
* Add missing unlock opeation in devfreq_add_device() (Lukasz
Luba).
* Use the next frequency as resume_freq instead of the previous
frequency when using the opp-suspend property (Dong Aisheng).
* Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
* Fix set_freq path for the userspace governor in Kconfig (Dong
Aisheng).
* Remove invalid description of get_target_freq() (Dong Aisheng).
- Update devfreq drivers:
* imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
of_match_ptr() (Dong Aisheng, Fabio Estevam).
* rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
references to undefined symbols (Enric Balletbo i Serra, Gaël
PORTAY).
* rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
Kozlowski).
* imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
- Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
- Fix typo in the pm-graph utility code (Ricardo Ribalda)"
* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
PM: wakeup: remove redundant assignment to variable retval
PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
cpufreq: Kconfig: fix documentation links
PM: wakeup: use dev_set_name() directly
PM: runtime: Add documentation for pm_runtime_resume_and_get()
cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
cpufreq: armada-37xx: Fix module unloading
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Fix driver cleanup when registration failed
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix setting TBG parent for load levels
cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
cpuidle: tegra: Remove do_idle firmware call
cpuidle: tegra: Fix C7 idling state on Tegra114
PM: sleep: fix typos in comments
cpufreq: Remove unused for_each_policy macro
...
Core changes:
- Allow runtime power management when the clocksource is changed.
- A correctness fix for clock_adjtime32() so that the return value
on success is not overwritten by the result of the copy to user.
- Allow late installment of broadcast clockevent devices which was
broken because nothing switched them over to oneshot mode. This went
unnoticed so far because clockevent devices used to be built in, but
now people started to make them modular.
- Debugfs related simplifications
- Small cleanups and improvements here and there
Driver changes:
- The usual set of device tree binding updates for a wide range
of drivers/devices.
- The usual updates and improvements for drivers all over the place but
nothing outstanding.
- No new clocksource/event drivers. They'll come back next time.
-----BEGIN PGP SIGNATURE-----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=F6Du
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The time and timers updates contain:
Core changes:
- Allow runtime power management when the clocksource is changed.
- A correctness fix for clock_adjtime32() so that the return value on
success is not overwritten by the result of the copy to user.
- Allow late installment of broadcast clockevent devices which was
broken because nothing switched them over to oneshot mode. This
went unnoticed so far because clockevent devices used to be built
in, but now people started to make them modular.
- Debugfs related simplifications
- Small cleanups and improvements here and there
Driver changes:
- The usual set of device tree binding updates for a wide range of
drivers/devices.
- The usual updates and improvements for drivers all over the place
but nothing outstanding.
- No new clocksource/event drivers. They'll come back next time"
* tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
posix-timers: Preserve return value in clock_adjtime32()
tick/broadcast: Allow late registered device to enter oneshot mode
tick: Use tick_check_replacement() instead of open coding it
time/timecounter: Mark 1st argument of timecounter_cyc2time() as const
dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer
clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init
clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak
clocksource/drivers/npcm: Add support for WPCM450
clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3
clocksource/drivers/pistachio: Fix trivial typo
clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
clocksource/drivers/timer-ti-dm: Fix posted mode status check order
dt-bindings: timer: renesas,cmt: Document R8A77961
dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support
clocksource/drivers/ingenic-ost: Add support for the JZ4760B
clocksource/drivers/ingenic: Add support for the JZ4760
dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B)
...
Core changes:
- Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can be
cleaned up which either use a seperate mechanism to prevent auto-enable
at request time or have a racy mechanism which disables the interrupt
right after request.
- Get rid of the last usage of irq_create_identity_mapping() and remove
the interface.
- An overhaul of tasklet_disable(). Most usage sites of tasklet_disable()
are in task context and usually in cleanup, teardown code pathes.
tasklet_disable() spinwaits for a tasklet which is currently executed.
That's not only a problem for PREEMPT_RT where this can lead to a live
lock when the disabling task preempts the softirq thread. It's also
problematic in context of virtualization when the vCPU which runs the
tasklet is scheduled out and the disabling code has to spin wait until
it's scheduled back in. Though there are a few code pathes which invoke
tasklet_disable() from non-sleepable context. For these a new disable
variant which still spinwaits is provided which allows to switch
tasklet_disable() to a sleep wait mechanism. For the atomic use cases
this does not solve the live lock issue on PREEMPT_RT. That is mitigated
by blocking on the RT specific softirq lock.
- The PREEMPT_RT specific implementation of softirq processing and
local_bh_disable/enable().
On RT enabled kernels soft interrupt processing happens always in task
context and all interrupt handlers, which are not explicitly marked to
be invoked in hard interrupt context are forced into task context as
well. This allows to protect against softirq processing with a per
CPU lock, which in turn allows to make BH disabled regions preemptible.
Most of the softirq handling code is still shared. The RT/non-RT
specific differences are addressed with a set of inline functions which
provide the context specific functionality. The local_bh_disable() /
local_bh_enable() mechanism are obviously seperate.
- The usual set of small improvements and cleanups
Driver changes:
- New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt controllers
- Extended functionality for MStar, STM32 and SC7280 irq chips
- Enhanced robustness for ARM GICv3/4.1 drivers
- The usual set of cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=id4G
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The usual updates from the irq departement:
Core changes:
- Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can
be cleaned up which either use a seperate mechanism to prevent
auto-enable at request time or have a racy mechanism which disables
the interrupt right after request.
- Get rid of the last usage of irq_create_identity_mapping() and
remove the interface.
- An overhaul of tasklet_disable().
Most usage sites of tasklet_disable() are in task context and
usually in cleanup, teardown code pathes. tasklet_disable()
spinwaits for a tasklet which is currently executed. That's not
only a problem for PREEMPT_RT where this can lead to a live lock
when the disabling task preempts the softirq thread. It's also
problematic in context of virtualization when the vCPU which runs
the tasklet is scheduled out and the disabling code has to spin
wait until it's scheduled back in.
There are a few code pathes which invoke tasklet_disable() from
non-sleepable context. For these a new disable variant which still
spinwaits is provided which allows to switch tasklet_disable() to a
sleep wait mechanism. For the atomic use cases this does not solve
the live lock issue on PREEMPT_RT. That is mitigated by blocking on
the RT specific softirq lock.
- The PREEMPT_RT specific implementation of softirq processing and
local_bh_disable/enable().
On RT enabled kernels soft interrupt processing happens always in
task context and all interrupt handlers, which are not explicitly
marked to be invoked in hard interrupt context are forced into task
context as well. This allows to protect against softirq processing
with a per CPU lock, which in turn allows to make BH disabled
regions preemptible.
Most of the softirq handling code is still shared. The RT/non-RT
specific differences are addressed with a set of inline functions
which provide the context specific functionality. The
local_bh_disable() / local_bh_enable() mechanism are obviously
seperate.
- The usual set of small improvements and cleanups
Driver changes:
- New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt
controllers
- Extended functionality for MStar, STM32 and SC7280 irq chips
- Enhanced robustness for ARM GICv3/4.1 drivers
- The usual set of cleanups and improvements all over the place"
* tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP
irqchip/gic-v3: Do not enable irqs when handling spurious interrups
dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller
irqchip: Add support for IDT 79rc3243x interrupt controller
irqdomain: Drop references to recusive irqdomain setup
irqdomain: Get rid of irq_create_strict_mappings()
irqchip/jcore-aic: Kill use of irq_create_strict_mappings()
ARM: PXA: Kill use of irq_create_strict_mappings()
irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection
irqchip/tb10x: Use 'fallthrough' to eliminate a warning
genirq: Reduce irqdebug cacheline bouncing
kernel: Initialize cpumask before parsing
irqchip/wpcm450: Drop COMPILE_TEST
irqchip/irq-mst: Support polarity configuration
irqchip: Add driver for WPCM450 interrupt controller
dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic
dt-bindings: qcom,pdc: Add compatible for sc7280
irqchip/stm32: Add usart instances exti direct event support
irqchip/gic-v3: Fix OF_BAD_ADDR error handling
irqchip/sifive-plic: Mark two global variables __ro_after_init
...
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
-----BEGIN PGP SIGNATURE-----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=fpey
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.13
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
The return value on success (>= 0) is overwritten by the return value of
put_old_timex32(). That works correct in the fault case, but is wrong for
the success case where put_old_timex32() returns 0.
Just check the return value of put_old_timex32() and return -EFAULT in case
it is not zero.
[ tglx: Massage changelog ]
Fixes: 3a4d44b616 ("ntp: Move adjtimex related compat syscalls to native counterparts")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210414030449.90692-1-chenjun102@huawei.com
The broadcast device is switched to oneshot mode when the system switches
to oneshot mode. If a broadcast clock event device is registered after the
system switched to oneshot mode, it will stay in periodic mode forever.
Ensure that a late registered device which is selected as broadcast device
is initialized in oneshot mode when the system already uses oneshot mode.
[ tglx: Massage changelog ]
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210331083318.21794-1-jindong.yue@nxp.com
The function tick_check_replacement() is the combination of
tick_check_percpu() and tick_check_preferred(), but tick_check_new_device()
has the same logic open coded.
Use the helper to simplify the code.
[ tglx: Massage changelog ]
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210326022328.3266-1-wangwensheng4@huawei.com
Make the tick_nohz_get_next_hrtimer() kerneldoc comment state clearly
that the function may return negative numbers.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
System time snapshots are not conveying information about the current
clocksource which was used, but callers like the PTP KVM guest
implementation have the requirement to evaluate the clocksource type to
select the appropriate mechanism.
Introduce a clocksource id field in struct clocksource which is by default
set to CSID_GENERIC (0). Clocksource implementations can set that field to
a value which allows to identify the clocksource.
Store the clocksource id of the current clocksource in the
system_time_snapshot so callers can evaluate which clocksource was used to
take the snapshot and act accordingly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-5-jianyong.wu@arm.com
The struct clocksource callbacks enable() and disable() are described as a
way to allow clock sources to enter a power save mode. See commit
4614e6adaf ("clocksource: add enable() and disable() callbacks")
But using runtime PM from these callbacks triggers a cyclic lockdep warning when
switching clock source using change_clocksource().
# echo e60f0000.timer > /sys/devices/system/clocksource/clocksource0/current_clocksource
======================================================
WARNING: possible circular locking dependency detected
------------------------------------------------------
migration/0/11 is trying to acquire lock:
ffff0000403ed220 (&dev->power.lock){-...}-{2:2}, at: __pm_runtime_resume+0x40/0x74
but task is already holding lock:
ffff8000113c8f88 (tk_core.seq.seqcount){----}-{0:0}, at: multi_cpu_stop+0xa4/0x190
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (tk_core.seq.seqcount){----}-{0:0}:
ktime_get+0x28/0xa0
hrtimer_start_range_ns+0x210/0x2dc
generic_sched_clock_init+0x70/0x88
sched_clock_init+0x40/0x64
start_kernel+0x494/0x524
-> #1 (hrtimer_bases.lock){-.-.}-{2:2}:
hrtimer_start_range_ns+0x68/0x2dc
rpm_suspend+0x308/0x5dc
rpm_idle+0xc4/0x2a4
pm_runtime_work+0x98/0xc0
process_one_work+0x294/0x6f0
worker_thread+0x70/0x45c
kthread+0x154/0x160
ret_from_fork+0x10/0x20
-> #0 (&dev->power.lock){-...}-{2:2}:
_raw_spin_lock_irqsave+0x7c/0xc4
__pm_runtime_resume+0x40/0x74
sh_cmt_start+0x1c4/0x260
sh_cmt_clocksource_enable+0x28/0x50
change_clocksource+0x9c/0x160
multi_cpu_stop+0xa4/0x190
cpu_stopper_thread+0x90/0x154
smpboot_thread_fn+0x244/0x270
kthread+0x154/0x160
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
&dev->power.lock --> hrtimer_bases.lock --> tk_core.seq.seqcount
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tk_core.seq.seqcount);
lock(hrtimer_bases.lock);
lock(tk_core.seq.seqcount);
lock(&dev->power.lock);
*** DEADLOCK ***
2 locks held by migration/0/11:
#0: ffff8000113c9278 (timekeeper_lock){-.-.}-{2:2}, at: change_clocksource+0x2c/0x160
#1: ffff8000113c8f88 (tk_core.seq.seqcount){----}-{0:0}, at: multi_cpu_stop+0xa4/0x190
Rework change_clocksource() so it enables the new clocksource and disables
the old clocksource outside of the timekeeper_lock and seqcount write held
region. There is no requirement that these callbacks are invoked from the
lock held region.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210211134318.323910-1-niklas.soderlund+renesas@ragnatech.se
There is no need to keep the dentry pointer around for the created
debugfs file, as it is only needed when removing it from the system.
When it is to be removed, ask debugfs itself for the pointer, to save on
storage and make things a bit simpler.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210216155020.1012407-1-gregkh@linuxfoundation.org
On RT a task which has soft interrupts disabled can block on a lock and
schedule out to idle while soft interrupts are pending. This triggers the
warning in the NOHZ idle code which complains about going idle with pending
soft interrupts. But as the task is blocked soft interrupt processing is
temporarily blocked as well which means that such a warning is a false
positive.
To prevent that check the per CPU state which indicates that a scheduled
out task has soft interrupts disabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210309085727.527563866@linutronix.de
Preparation for fixing get_nr_restart_syscall() on X86 for COMPAT.
Add a new helper which sets restart_block->fn and calls a dummy
arch_set_restart_data() helper.
Fixes: 609c19a385 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174641.GA17871@redhat.com
hrtimer_force_reprogram() and hrtimer_interrupt() invokes
__hrtimer_get_next_event() to find the earliest expiry time of hrtimer
bases. __hrtimer_get_next_event() does not update
cpu_base::[softirq_]_expires_next to preserve reprogramming logic. That
needs to be done at the callsites.
hrtimer_force_reprogram() updates cpu_base::softirq_expires_next only when
the first expiring timer is a softirq timer and the soft interrupt is not
activated. That's wrong because cpu_base::softirq_expires_next is left
stale when the first expiring timer of all bases is a timer which expires
in hard interrupt context. hrtimer_interrupt() does never update
cpu_base::softirq_expires_next which is wrong too.
That becomes a problem when clock_settime() sets CLOCK_REALTIME forward and
the first soft expiring timer is in the CLOCK_REALTIME_SOFT base. Setting
CLOCK_REALTIME forward moves the clock MONOTONIC based expiry time of that
timer before the stale cpu_base::softirq_expires_next.
cpu_base::softirq_expires_next is cached to make the check for raising the
soft interrupt fast. In the above case the soft interrupt won't be raised
until clock monotonic reaches the stale cpu_base::softirq_expires_next
value. That's incorrect, but what's worse it that if the softirq timer
becomes the first expiring timer of all clock bases after the hard expiry
timer has been handled the reprogramming of the clockevent from
hrtimer_interrupt() will result in an interrupt storm. That happens because
the reprogramming does not use cpu_base::softirq_expires_next, it uses
__hrtimer_get_next_event() which returns the actual expiry time. Once clock
MONOTONIC reaches cpu_base::softirq_expires_next the soft interrupt is
raised and the storm subsides.
Change the logic in hrtimer_force_reprogram() to evaluate the soft and hard
bases seperately, update softirq_expires_next and handle the case when a
soft expiring timer is the first of all bases by comparing the expiry times
and updating the required cpu base fields. Split this functionality into a
separate function to be able to use it in hrtimer_interrupt() as well
without copy paste.
Fixes: 5da7016046 ("hrtimer: Implement support for softirq based hrtimers")
Reported-by: Mikael Beckius <mikael.beckius@windriver.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikael Beckius <mikael.beckius@windriver.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210223160240.27518-1-anna-maria@linutronix.de
- Documentation updates.
- Miscellaneous fixes.
- kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return
addresses to more easily locate bugs. This has a couple of RCU-related commits,
but is mostly MM. Was pulled in with akpm's agreement.
- Per-callback-batch tracking of numbers of callbacks,
which enables better debugging information and smarter
reactions to large numbers of callbacks.
- The first round of changes to allow CPUs to be runtime switched from and to
callback-offloaded state.
- CONFIG_PREEMPT_RT-related changes.
- RCU CPU stall warning updates.
- Addition of polling grace-period APIs for SRCU.
- Torture-test and torture-test scripting updates, including a "torture everything"
script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale.
Plus does an allmodconfig build.
- nolibc fixes for the torture tests
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmAs9lgRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1j/axAAsqIvarDD6OLmgcOPCyWSvfG6LsIFgqI9
CY0JdQBtvFBTvE8Q2No5ktbLVmuYsBh0dGeFkv4HQZJyRlr7mjstVMNN4SeBDVIS
/+zZO1wlwzaXfKQopLctTK1O/UzFqIN2sqyzA3nLzGGj8DqgxXJyreJ10feK5XM+
6ttZPd1qm4hqtpA22ZEODbct5OFqZuvnK8VNqBb2YHabA1rasUXbIEJPBpsuv/W2
l9W5AGP4erdOFm3nHJxiCpvLJtgHy4njvw0HJp5f99Abj6OVeAzw5kFjvRB3n1Qd
ayKyTw8T/1mfmkjvYkGsMAqhEmqwXcryFX0dR/14/XPdXyjPhZlbkz+MfRKrn4NT
LBJPX+MlX9lVFWBNR9HMe2o/083+gorlwZt9wtyt0OBBGGgudYo4uKNdbyy6tB3Y
Gb98P2vtVSO24EsQce6M+ppHN4TgVBd6id82MQxNuFw+PQJdBiCY0JJfNQApbAry
cIKOchSSR2SkJHlAevNVaKAeiTnkAXd1jDBKtCnvCqOUyvtnhE3rQCqwS5xT2Cno
oQydpudwBKT7uO/GUyS0ESErjHuy9zhExNSYD0ydxlBCrGbzrrgPg57ntXHA1die
mtFyvc2tfT/AshWRNYiuCG+eaUG3qK7n7jN7Vc6/K5DR4GMb5tOhL9wPx2ljCRGu
Z8WDg0pJGz4=
=31yj
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"These are the latest RCU updates for v5.12:
- Documentation updates.
- Miscellaneous fixes.
- kfree_rcu() updates: Addition of mem_dump_obj() to provide
allocator return addresses to more easily locate bugs. This has a
couple of RCU-related commits, but is mostly MM. Was pulled in with
akpm's agreement.
- Per-callback-batch tracking of numbers of callbacks, which enables
better debugging information and smarter reactions to large numbers
of callbacks.
- The first round of changes to allow CPUs to be runtime switched
from and to callback-offloaded state.
- CONFIG_PREEMPT_RT-related changes.
- RCU CPU stall warning updates.
- Addition of polling grace-period APIs for SRCU.
- Torture-test and torture-test scripting updates, including a
"torture everything" script that runs rcutorture, locktorture,
scftorture, rcuscale, and refscale. Plus does an allmodconfig
build.
- nolibc fixes for the torture tests"
* tag 'core-rcu-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
percpu_ref: Dump mem_dump_obj() info upon reference-count underflow
rcu: Make call_rcu() print mem_dump_obj() info for double-freed callback
mm: Make mem_obj_dump() vmalloc() dumps include start and length
mm: Make mem_dump_obj() handle vmalloc() memory
mm: Make mem_dump_obj() handle NULL and zero-sized pointers
mm: Add mem_dump_obj() to print source of memory block
tools/rcutorture: Fix position of -lgcc in mkinitrd.sh
tools/nolibc: Fix position of -lgcc in the documented example
tools/nolibc: Emit detailed error for missing alternate syscall number definitions
tools/nolibc: Remove incorrect definitions of __ARCH_WANT_*
tools/nolibc: Get timeval, timespec and timezone from linux/time.h
tools/nolibc: Implement poll() based on ppoll()
tools/nolibc: Implement fork() based on clone()
tools/nolibc: Make getpgrp() fall back to getpgid(0)
tools/nolibc: Make dup2() rely on dup3() when available
tools/nolibc: Add the definition for dup()
rcutorture: Add rcutree.use_softirq=0 to RUDE01 and TASKS01
torture: Maintain torture-specific set of CPUs-online books
torture: Clean up after torture-test CPU hotplugging
rcutorture: Make object_debug also double call_rcu() heap object
...
- Instead of new drivers remove tango, sirf, u300 and atlas drivers
- Add suspend/resume support for microchip pit64b
- The usual fixes, improvements and cleanups here and there
-----BEGIN PGP SIGNATURE-----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=xZQt
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2021-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time and timer updates:
- Instead of new drivers remove tango, sirf, u300 and atlas drivers
- Add suspend/resume support for microchip pit64b
- The usual fixes, improvements and cleanups here and there"
* tag 'timers-core-2021-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timens: Delete no-op time_ns_init()
alarmtimer: Update kerneldoc
clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume
clocksource/drivers/prima: Remove sirf prima driver
clocksource/drivers/atlas: Remove sirf atlas driver
clocksource/drivers/tango: Remove tango driver
clocksource/drivers/u300: Remove the u300 driver
dt-bindings: timer: nuvoton: Clarify that interrupt of timer 0 should be specified
clocksource/drivers/davinci: Move pr_fmt() before the includes
clocksource/drivers/efm32: Drop unused timer code
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return
addresses to more easily locate bugs. This has a couple of RCU-related commits,
but is mostly MM. Was pulled in with akpm's agreement.
- Per-callback-batch tracking of numbers of callbacks,
which enables better debugging information and smarter
reactions to large numbers of callbacks.
- The first round of changes to allow CPUs to be runtime switched from and to
callback-offloaded state.
- CONFIG_PREEMPT_RT-related changes.
- RCU CPU stall warning updates.
- Addition of polling grace-period APIs for SRCU.
- Torture-test and torture-test scripting updates, including a "torture everything"
script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale.
Plus does an allmodconfig build.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The bug fixed by commit e3fab2f3de ("ntp: Fix RTC synchronization on
32-bit platforms") revealed an underlying issue: RTC synchronization may
happen anytime, even while the system is partially suspended.
On systems where the RTC is connected to an I2C bus, the I2C bus controller
may already or still be suspended, triggering a WARNING during suspend or
resume from s2ram:
WARNING: CPU: 0 PID: 124 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0x634/0x680
i2c i2c-6: Transfer while suspended
[...]
Workqueue: events_power_efficient sync_hw_clock
[...]
(__i2c_transfer)
(i2c_transfer)
(regmap_i2c_read)
...
(da9063_rtc_set_time)
(rtc_set_time)
(sync_hw_clock)
(process_one_work)
Fix this race condition by using the freezable instead of the normal
power-efficient workqueue.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210125143039.1051912-1-geert+renesas@glider.be
Due to an integer overflow, RTC synchronization now happens every 2s
instead of the intended 11 minutes. Fix this by forcing 64-bit
arithmetic for the sync period calculation.
Annotate the other place which multiplies seconds for consistency as well.
Fixes: c9e6189fb0 ("ntp: Make the RTC synchronization more reliable")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210111103956.290378-1-geert+renesas@glider.be
This commit addresses a few code-style nits in callback-offloading
toggling, including one that predates this toggling.
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a timer_curr_running() function that verifies that the
current code is running in the context of the specified timer's handler.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
and fix a typo in the Kconfig help text.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T0Y6
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Update/fix two CPU sanity checks in the hotplug and the boot code, and
fix a typo in the Kconfig help text.
[ Context: the first two commits are the result of an ongoing
annotation+review work of (intentional) tick_do_timer_cpu() data
races reported by KCSAN, but the annotations aren't fully cooked
yet ]"
* tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill"
tick/sched: Remove bogus boot "safety" check
tick: Remove pointless cpu valid check in hotplug code
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201217171705.57586-1-colin.king@canonical.com
can_stop_idle_tick() checks whether the do_timer() duty has been taken over
by a CPU on boot. That's silly because the boot CPU always takes over with
the initial clockevent device.
But even if no CPU would have installed a clockevent and taken over the
duty then the question whether the tick on the current CPU can be stopped
or not is moot. In that case the current CPU would have no clockevent
either, so there would be nothing to keep ticking.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20201206212002.725238293@linutronix.de
tick_handover_do_timer() which is invoked when a CPU is unplugged has a
check for cpumask_first(cpu_online_mask) when it tries to hand over the
tick update duty.
Checking the result of cpumask_first() there is pointless because if the
online mask is empty at this point, then this would be the last CPU in the
system going offline, which is impossible. There is always at least one CPU
remaining. If online mask would be really empty then the timer duty would
be the least of the resulting problems.
Remove the well meant check simply because it is pointless and confusing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20201206212002.582579516@linutronix.de
This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as
a result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one
Arm platform. These all do timer ticks slighly differently, and this
gets cleaned up to the point they at least all call the same helper
function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
in Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=QpNs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
- migrate_disable/enable() support which originates from the RT tree and
is now a prerequisite for the new preemptible kmap_local() API which aims
to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=Oz1V
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
Core:
- Robustness improvements for the NOHZ tick management
- Fixes and consolidation of the NTP/RTC synchronization code
- Small fixes and improvements in various places
- A set of function documentation udpates and fixes
Drivers:
- Cleanups and improvements in various clocksoure/event drivers
- Removal of the EZChip NPS clocksource driver as the platfrom support
was removed from ARC
- The usual set of new device tree binding and json conversions
- The RTC driver which have been acked by the RTC maintainer:
- Fix a long standing bug in the MC146818 library code which can cause
reading garbage during the RTC internal update.
- The changes related to the NTP/RTC consolidation work.
-----BEGIN PGP SIGNATURE-----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=eWC0
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
"Core:
- Robustness improvements for the NOHZ tick management
- Fixes and consolidation of the NTP/RTC synchronization code
- Small fixes and improvements in various places
- A set of function documentation udpates and fixes
Drivers:
- Cleanups and improvements in various clocksoure/event drivers
- Removal of the EZChip NPS clocksource driver as the platfrom
support was removed from ARC
- The usual set of new device tree binding and json conversions
- The RTC driver which have been acked by the RTC maintainer:
* fix a long standing bug in the MC146818 library code which can
cause reading garbage during the RTC internal update.
* changes related to the NTP/RTC consolidation work"
* tag 'timers-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
ntp: Fix prototype in the !CONFIG_GENERIC_CMOS_UPDATE case
tick/sched: Make jiffies update quick check more robust
ntp: Consolidate the RTC update implementation
ntp: Make the RTC sync offset less obscure
ntp, rtc: Move rtc_set_ntp_time() to ntp code
ntp: Make the RTC synchronization more reliable
rtc: core: Make the sync offset default more realistic
rtc: cmos: Make rtc_cmos sync offset correct
rtc: mc146818: Reduce spinlock section in mc146818_set_time()
rtc: mc146818: Prevent reading garbage
clocksource/drivers/sh_cmt: Fix potential deadlock when calling runtime PM
clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI
clocksource/drivers/arm_arch_timer: Use stable count reader in erratum sne
clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available
clocksource/drivers/riscv: Make RISCV_TIMER depends on RISCV_SBI
clocksource/drivers/ingenic: Fix section mismatch
clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent()
dt-bindings: timer: renesas: tmu: Convert to json-schema
dt-bindings: timer: renesas: tmu: Document r8a774e1 bindings
clocksource/drivers/orion: Add missing clk_disable_unprepare() on error path
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCX9daOgAKCRCRxhvAZXjc
ohPkAQChXUB2BAjtIzXlCkZoDBbzHHblm5DZ37oy/4xYFmAcEwEA5sw6dQqyGHnF
GEP9def51HvXLpBV2BzNUGggo1SoGgQ=
=w/cO
-----END PGP SIGNATURE-----
Merge tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull misc fixes from Christian Brauner:
"This contains several fixes which felt worth being combined into a
single branch:
- Use put_nsproxy() instead of open-coding it switch_task_namespaces()
- Kirill's work to unify lifecycle management for all namespaces. The
lifetime counters are used identically for all namespaces types.
Namespaces may of course have additional unrelated counters and
these are not altered. This work allows us to unify the type of the
counters and reduces maintenance cost by moving the counter in one
place and indicating that basic lifetime management is identical
for all namespaces.
- Peilin's fix adding three byte padding to Dmitry's
PTRACE_GET_SYSCALL_INFO uapi struct to prevent an info leak.
- Two smal patches to convert from the /* fall through */ comment
annotation to the fallthrough keyword annotation which I had taken
into my branch and into -next before df561f6688 ("treewide: Use
fallthrough pseudo-keyword") made it upstream which fixed this
tree-wide.
Since I didn't want to invalidate all testing for other commits I
didn't rebase and kept them"
* tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
nsproxy: use put_nsproxy() in switch_task_namespaces()
sys: Convert to the new fallthrough notation
signal: Convert to the new fallthrough notation
time: Use generic ns_common::count
cgroup: Use generic ns_common::count
mnt: Use generic ns_common::count
user: Use generic ns_common::count
pid: Use generic ns_common::count
ipc: Use generic ns_common::count
uts: Use generic ns_common::count
net: Use generic ns_common::count
ns: Add a common refcount into ns_common
ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()
The quick check in tick_do_update_jiffies64() whether jiffies need to be
updated is not really correct under all circumstances and on all
architectures, especially not on 32bit systems.
The quick check does:
if (now < READ_ONCE(tick_next_period))
return;
and the counterpart in the update is:
WRITE_ONCE(tick_next_period, next_update_time);
This has two problems:
1) On weakly ordered architectures there is no guarantee that the stores
before the WRITE_ONCE() are visible which means that other CPUs can
operate on a stale jiffies value.
2) On 32bit the store of tick_next_period which is an u64 is split into
two 32bit stores. If the first 32bit store advances tick_next_period
far out and the second 32bit store is delayed (virt, NMI ...) then
jiffies will become stale until the second 32bit store happens.
Address this by seperating the handling for 32bit and 64bit.
On 64bit problem #1 is addressed by replacing READ_ONCE() / WRITE_ONCE()
with smp_load_acquire() / smp_store_release().
On 32bit problem #2 is addressed by protecting the quick check with the
jiffies sequence counter. The load and stores can be plain because the
sequence count mechanics provides the required barriers already.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87czzpc02w.fsf@nanos.tec.linutronix.de
The code for the legacy RTC and the RTC class based update are pretty much
the same. Consolidate the common parts into one function and just invoke
the actual setter functions.
For RTC class based devices the update code checks whether the offset is
valid for the device, which is usually not the case for the first
invocation. If it's not the same it stores the correct offset and lets the
caller try again. That's not much different from the previous approach
where the first invocation had a pretty low probability to actually hit the
allowed window.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201206220542.355743355@linutronix.de
The current RTC set_offset_nsec value is not really intuitive to
understand.
tsched twrite(t2.tv_sec - 1) t2 (seconds increment)
The offset is calculated from twrite based on the assumption that t2 -
twrite == 1s. That means for the MC146818 RTC the offset needs to be
negative so that the write happens 500ms before t2.
It's easier to understand when the whole calculation is based on t2. That
avoids negative offsets and the meaning is obvious:
t2 - twrite: The time defined by the chip when seconds increment
after the write.
twrite - tsched: The time for the transport to the point where the chip
is updated.
==> set_offset_nsec = t2 - tsched
ttransport = twrite - tsched
tRTCinc = t2 - twrite
==> set_offset_nsec = ttransport + tRTCinc
tRTCinc is a chip property and can be obtained from the data sheet.
ttransport depends on how the RTC is connected. It is close to 0 for
directly accessible RTCs. For RTCs behind a slow bus, e.g. i2c, it's the
time required to send the update over the bus. This can be estimated or
even calibrated, but that's a different problem.
Adjust the implementation and update comments accordingly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201206220542.263204937@linutronix.de
rtc_set_ntp_time() is not really RTC functionality as the code is just a
user of RTC. Move it into the NTP code which allows further cleanups.
Requested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201206220542.166871172@linutronix.de
Miroslav reported that the periodic RTC synchronization in the NTP code
fails more often than not to hit the specified update window.
The reason is that the code uses delayed_work to schedule the update which
needs to be in thread context as the underlying RTC might be connected via
a slow bus, e.g. I2C. In the update function it verifies whether the
current time is correct vs. the requirements of the underlying RTC.
But delayed_work is using the timer wheel for scheduling which is
inaccurate by design. Depending on the distance to the expiry the wheel
gets less granular to allow batching and to avoid the cascading of the
original timer wheel. See 500462a9de ("timers: Switch to a non-cascading
wheel") and the code for further details.
The code already deals with this by splitting the 660 seconds period into a
long 659 seconds timer and then retrying with a smaller delta.
But looking at the actual granularities of the timer wheel (which depend on
the HZ configuration) the 659 seconds timer ends up in an outer wheel level
and is affected by a worst case granularity of:
HZ Granularity
1000 32s
250 16s
100 40s
So the initial timer can be already off by max 12.5% which is not a big
issue as the period of the sync is defined as ~11 minutes.
The fine grained second attempt schedules to the desired update point with
a timer expiring less than a second from now. Depending on the actual delta
and the HZ setting even the second attempt can end up in outer wheel levels
which have a large enough granularity to make the correctness check fail.
As this is a fundamental property of the timer wheel there is no way to
make this more accurate short of iterating in one jiffies steps towards the
update point.
Switch it to an hrtimer instead which schedules the actual update work. The
hrtimer will expire precisely (max 1 jiffie delay when high resolution
timers are not available). The actual scheduling delay of the work is the
same as before.
The update is triggered from do_adjtimex() which is a bit racy but not much
more racy than it was before:
if (ntp_synced())
queue_delayed_work(system_power_efficient_wq, &sync_work, 0);
which is racy when the work is currently executed and has not managed to
reschedule itself.
This becomes now:
if (ntp_synced() && !hrtimer_is_queued(&sync_hrtimer))
queue_work(system_power_efficient_wq, &sync_work, 0);
which is racy when the hrtimer has expired and the work is currently
executed and has not yet managed to rearm the hrtimer.
Not a big problem as it just schedules work for nothing.
The new implementation has a safe guard in place to catch the case where
the hrtimer is queued on entry to the work function and avoids an extra
update attempt of the RTC that way.
Reported-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201206220542.062910520@linutronix.de
Get rid of the __call_single_node union and clean up the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
The variable tick_period is initialized to NSEC_PER_TICK / HZ during boot
and never updated again.
If NSEC_PER_TICK is not an integer multiple of HZ this computation is less
accurate than TICK_NSEC which has proper rounding in place.
Aside of the inaccuracy there is no reason for having this variable at
all. It's just a pointless indirection and all usage sites can just use the
TICK_NSEC constant.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.766643526@linutronix.de
calc_load_global() does not need the sequence count protection.
[ tglx: Split it up properly and added comments ]
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.660902274@linutronix.de
If jiffies are up to date already (caller lost the race against another
CPU) there is no point to change the sequence count. Doing that just forces
other CPUs into the seqcount retry loop in tick_nohz_next_event() for
nothing.
Just bail out early.
[ tglx: Rewrote most of it ]
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.462195901@linutronix.de
No point in doing calculations.
tick_next_period = last_jiffies_update + tick_period
Just check whether now is before tick_next_period to figure out whether
jiffies need an update.
Add a comment why the intentional data race in the quick check is safe or
not so safe in a 32bit corner case and why we don't worry about it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.337366695@linutronix.de
tick_broadcast_setup_oneshot() accesses tick_next_period twice without any
serialization. This is wrong in two aspects:
- Reading it twice might make the broadcast data inconsistent if the
variable is updated concurrently.
- On 32bit systems the access might see an partial update
Protect it with jiffies_lock. That's safe as none of the callchains leading
up to this function can create a lock ordering violation:
timer interrupt
run_local_timers()
hrtimer_run_queues()
hrtimer_switch_to_hres()
tick_init_highres()
tick_switch_to_oneshot()
tick_broadcast_switch_to_oneshot()
or
tick_check_oneshot_change()
tick_nohz_switch_to_nohz()
tick_switch_to_oneshot()
tick_broadcast_switch_to_oneshot()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.061341507@linutronix.de
timens_on_fork() always return 0, and maybe not
need to judge the return value in copy_namespaces().
So make timens_on_fork() return nothing and do not
judge its return val in copy_namespaces().
Signed-off-by: Hui Su <sh_def@163.com>
Link: https://lore.kernel.org/r/20201117161750.GA45121@rlk
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The hrtimer_get_remaining() markup is documenting, instead,
__hrtimer_get_remaining(), as it is placed at the C file.
In order to properly document it, a kernel-doc markup is needed together
with the function prototype. So, add a new one, while preserving the
existing one, just fixing the function name.
The hrtimer_is_queued prototype has a typo: it is using
'=' instead of '-' to split: identifier - description
as required by kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/9dc87808c2fd07b7e050bafcd033c5ef05808fea.1605521731.git.mchehab+huawei@kernel.org
No users outside of the timer code. Move the caller below this function to
avoid a pointless forward declaration.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The kernel-doc parser complains:
kernel/time/timekeeping.c:1543: warning: Function parameter or member
'ts' not described in 'read_persistent_clock64'
kernel/time/timekeeping.c:764: warning: Function parameter or member
'tk' not described in 'timekeeping_forward_now'
kernel/time/timekeeping.c:1331: warning: Function parameter or member
'ts' not described in 'timekeeping_inject_offset'
kernel/time/timekeeping.c:1331: warning: Excess function parameter 'tv'
description in 'timekeeping_inject_offset'
Add the missing parameter documentations and rename the 'tv' parameter of
timekeeping_inject_offset() to 'ts' so it matches the implemention.
[ tglx: Reworded a few docs and massaged changelog ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1605252275-63652-5-git-send-email-alex.shi@linux.alibaba.com
Address the following kernel-doc markup warnings:
kernel/time/timekeeping.c:1563: warning: Function parameter or member
'wall_time' not described in 'read_persistent_wall_and_boot_offset'
kernel/time/timekeeping.c:1563: warning: Function parameter or member
'boot_offset' not described in 'read_persistent_wall_and_boot_offset'
The parameters are described but miss the leading '@' and the colon after
the parameter names.
[ tglx: Massaged changelog ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1605252275-63652-6-git-send-email-alex.shi@linux.alibaba.com
The kernel-doc parser complains about:
kernel/time/timekeeping.c:651: warning: Function parameter or member
'nb' not described in 'pvclock_gtod_register_notifier'
kernel/time/timekeeping.c:670: warning: Function parameter or member
'nb' not described in 'pvclock_gtod_unregister_notifier'
Add the missing parameter explanations.
[ tglx: Massaged changelog ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1605252275-63652-3-git-send-email-alex.shi@linux.alibaba.com
Alex reported the following warning:
kernel/time/timekeeping.c:464: warning: Function parameter or member
'tkf' not described in '__ktime_get_fast_ns'
which is not entirely correct because the documented function is
ktime_get_mono_fast_ns() which does not have a parameter, but the
kernel-doc parser looks at the function declaration which follows the
comment and complains about the missing parameter documentation.
Aside of that the documentation for the rest of the NMI safe accessors is
either incomplete or missing.
- Move the function documentation to the right place
- Fixup the references and inconsistencies
- Add the missing documentation for ktime_get_raw_fast_ns()
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Address the following warning:
kernel/time/timekeeping.c:415: warning: Function parameter or member
'tkf' not described in 'update_fast_timekeeper'
[ tglx: Remove the bogus ktime_get_mono_fast_ns() part ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1605252275-63652-2-git-send-email-alex.shi@linux.alibaba.com
Various static functions in the timekeeping code have function comments
which pretend to be kernel-doc, but are incomplete and trigger parser
warnings.
As these functions are local to the timekeeping core code there is no need
to expose them via kernel-doc.
Remove the double star kernel-doc marker and remove excess newlines.
[ tglx: Massaged changelog and removed excess newlines ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1605252275-63652-4-git-send-email-alex.shi@linux.alibaba.com
Address these kernel-doc warnings:
kernel/time/timeconv.c:79: warning: Function parameter or member
'totalsecs' not described in 'time64_to_tm'
kernel/time/timeconv.c:79: warning: Function parameter or member
'offset' not described in 'time64_to_tm'
kernel/time/timeconv.c:79: warning: Function parameter or member
'result' not described in 'time64_to_tm'
The parameters are described but lack colons after the parameter name.
[ tglx: Massaged changelog ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1605252275-63652-1-git-send-email-alex.shi@linux.alibaba.com
PREEMPT_RT does not spin and wait until a running timer completes its
callback but instead it blocks on a sleeping lock to prevent a livelock in
the case that the task waiting for the callback completion preempted the
callback.
This cannot be done for timers flagged with TIMER_IRQSAFE. These timers can
be canceled from an interrupt disabled context even on RT kernels.
The expiry callback of such timers is invoked with interrupts disabled so
there is no need to use the expiry lock mechanism because obviously the
callback cannot be preempted even on RT kernels.
Do not use the timer_base::expiry_lock mechanism when waiting for a running
callback to complete if the timer is flagged with TIMER_IRQSAFE.
Also add a lockdep assertion for RT kernels to validate that the expiry
lock mechanism is always invoked in preemptible context.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201103190937.hga67rqhvknki3tp@linutronix.de
Use the "%ps" printk format string to resolve symbol names.
This works on all platforms, including ia64, ppc64 and parisc64 on which
one needs to dereference pointers to function descriptors instead of
function pointers.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201104163401.GA3984@ls3530.fritz.box
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.
Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.
For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.
At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:
text data bss dec hex filename
3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent
3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent
On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are no more users of xtime_update aside from legacy_timer_tick(),
so fold it into that function and remove the declaration.
update_process_times() is now only called inside of the kernel/time/
code, so the declaration can be moved there.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All platforms that currently do not use generic clockevents roughly call
the same set of functions in their timer interrupts: xtime_update(),
update_process_times() and profile_tick(), sometimes in a different
sequence.
Add a helper function that performs all three of them, to make the
callers more uniform and simplify the interface.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With Arm EBSA110 gone, nothing uses it any more, so the corresponding
code and the Kconfig option can be removed.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
UBSAN reports:
Undefined behaviour in ./include/linux/time64.h:127:27
signed integer overflow:
17179869187 * 1000000000 cannot be represented in type 'long long int'
Call Trace:
timespec64_to_ns include/linux/time64.h:127 [inline]
set_cpu_itimer+0x65c/0x880 kernel/time/itimer.c:180
do_setitimer+0x8e/0x740 kernel/time/itimer.c:245
__x64_sys_setitimer+0x14c/0x2c0 kernel/time/itimer.c:336
do_syscall_64+0xa1/0x540 arch/x86/entry/common.c:295
Commit bd40a17576 ("y2038: itimer: change implementation to timespec64")
replaced the original conversion which handled time clamping correctly with
timespec64_to_ns() which has no overflow protection.
Fix it in timespec64_to_ns() as this is not necessarily limited to the
usage in itimers.
[ tglx: Added comment and adjusted the fixes tag ]
Fixes: 361a3bf005 ("time64: Add time64.h header and define struct timespec64")
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1598952616-6416-1-git-send-email-prime.zeng@hisilicon.com
Since sched_clock_read_begin() and sched_clock_read_retry() are called
by notrace function sched_clock(), they shouldn't be traceable either,
or else ftrace_graph_caller will run into a dead loop on the path
as below (arm for instance):
ftrace_graph_caller()
prepare_ftrace_return()
function_graph_enter()
ftrace_push_return_trace()
trace_clock_local()
sched_clock()
sched_clock_read_begin/retry()
Fixes: 1b86abc1c6 ("sched_clock: Expose struct clock_read_data")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200929082027.16787-1-quanyang.wang@windriver.com
Use the new api and associate the seqcounter to the jiffies_lock enabling
lockdep support - although for this particular case the write-side locking
and non-preemptibility are quite obvious.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201021190749.19363-1-dave@stgolabs.net
With the removal of the interrupt perturbations in previous random32
change (random32: make prandom_u32() output unpredictable), the PRNG
has become 100% deterministic again. While SipHash is expected to be
way more robust against brute force than the previous Tausworthe LFSR,
there's still the risk that whoever has even one temporary access to
the PRNG's internal state is able to predict all subsequent draws till
the next reseed (roughly every minute). This may happen through a side
channel attack or any data leak.
This patch restores the spirit of commit f227e3ec3b ("random32: update
the net random state on interrupt and activity") in that it will perturb
the internal PRNG's statee using externally collected noise, except that
it will not pick that noise from the random pool's bits nor upon
interrupt, but will rather combine a few elements along the Tx path
that are collectively hard to predict, such as dev, skb and txq
pointers, packet length and jiffies values. These ones are combined
using a single round of SipHash into a single long variable that is
mixed with the net_rand_state upon each invocation.
The operation was inlined because it produces very small and efficient
code, typically 3 xor, 2 add and 2 rol. The performance was measured
to be the same (even very slightly better) than before the switch to
SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC
(i40e), the connection rate dropped from 556k/s to 555k/s while the
SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps.
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
Cc: George Spelvin <lkml@sdf.org>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Non-cryptographic PRNGs may have great statistical properties, but
are usually trivially predictable to someone who knows the algorithm,
given a small sample of their output. An LFSR like prandom_u32() is
particularly simple, even if the sample is widely scattered bits.
It turns out the network stack uses prandom_u32() for some things like
random port numbers which it would prefer are *not* trivially predictable.
Predictability led to a practical DNS spoofing attack. Oops.
This patch replaces the LFSR with a homebrew cryptographic PRNG based
on the SipHash round function, which is in turn seeded with 128 bits
of strong random key. (The authors of SipHash have *not* been consulted
about this abuse of their algorithm.) Speed is prioritized over security;
attacks are rare, while performance is always wanted.
Replacing all callers of prandom_u32() is the quick fix.
Whether to reinstate a weaker PRNG for uses which can tolerate it
is an open question.
Commit f227e3ec3b ("random32: update the net random state on interrupt
and activity") was an earlier attempt at a solution. This patch replaces
it.
Reported-by: Amit Klein <aksecurity@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Signed-off-by: George Spelvin <lkml@sdf.org>
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
[ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions
to prandom.h for later use; merged George's prandom_seed() proposal;
inlined siprand_u32(); replaced the net_rand_state[] array with 4
members to fix a build issue; cosmetic cleanups to make checkpatch
happy; fixed RANDOM32_SELFTEST build ]
Signed-off-by: Willy Tarreau <w@1wt.eu>
Pull RCU changes from Ingo Molnar:
- Debugging for smp_call_function()
- RT raw/non-raw lock ordering fixes
- Strict grace periods for KASAN
- New smp_call_function() torture test
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
[ This doesn't actually pull the tag - I've dropped the last merge from
the RCU branch due to questions about the series. - Linus ]
* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
smp: Make symbol 'csd_bug_count' static
kernel/smp: Provide CSD lock timeout diagnostics
smp: Add source and destination CPUs to __call_single_data
rcu: Shrink each possible cpu krcp
rcu/segcblist: Prevent useless GP start if no CBs to accelerate
torture: Add gdb support
rcutorture: Allow pointer leaks to test diagnostic code
rcutorture: Hoist OOM registry up one level
refperf: Avoid null pointer dereference when buf fails to allocate
rcutorture: Properly synchronize with OOM notifier
rcutorture: Properly set rcu_fwds for OOM handling
torture: Add kvm.sh --help and update help message
rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
torture: Update initrd documentation
rcutorture: Replace HTTP links with HTTPS ones
locktorture: Make function torture_percpu_rwsem_init() static
torture: document --allcpus argument added to the kvm.sh script
rcutorture: Output number of elapsed grace periods
rcutorture: Remove KCSAN stubs
rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
...
- Add deadlock detection for recursive read-locks. The rationale is outlined
in:
224ec489d3cd: ("lockdep/Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used to
switch between two copies of protected data. This allows the read path,
typically NMIs, to safely interrupt the write side critical section.
We utilize this new variant for sched-clock, and to make x86 TSC handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Iq51
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"These are the locking updates for v5.10:
- Add deadlock detection for recursive read-locks.
The rationale is outlined in commit 224ec489d3 ("lockdep/
Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used
to switch between two copies of protected data. This allows the
read path, typically NMIs, to safely interrupt the write side
critical section.
We utilize this new variant for sched-clock, and to make x86 TSC
handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes"
* tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"
lockdep: Fix lockdep recursion
lockdep: Fix usage_traceoverflow
locking/atomics: Check atomic-arch-fallback.h too
locking/seqlock: Tweak DEFINE_SEQLOCK() kernel doc
lockdep: Optimize the memory usage of circular queue
seqlock: Unbreak lockdep
seqlock: PREEMPT_RT: Do not starve seqlock_t writers
seqlock: seqcount_LOCKNAME_t: Introduce PREEMPT_RT support
seqlock: seqcount_t: Implement all read APIs as statement expressions
seqlock: Use unique prefix for seqcount_t property accessors
seqlock: seqcount_LOCKNAME_t: Standardize naming convention
seqlock: seqcount latch APIs: Only allow seqcount_latch_t
rbtree_latch: Use seqcount_latch_t
x86/tsc: Use seqcount_latch_t
timekeeping: Use seqcount_latch_t
time/sched_clock: Use seqcount_latch_t
seqlock: Introduce seqcount_latch_t
mm/swap: Do not abuse the seqcount_t latching API
time/sched_clock: Use raw_read_seqcount_latch() during suspend
...
Core:
- Early boot support for the NMI safe timekeeper by utilizing
local_clock() up to the point where timekeeping is initialized. This
allows printk() to store multiple timestamps in the ringbuffer which is
useful for coordinating dmesg information across a fleet of machines.
- Provide a multi-timestamp accessor for printk()
- Make timer init more robust by checking for invalid timer flags.
- Comma vs. semicolon fixes
Drivers:
- Support for new platforms in existing drivers (SP804 and Renesas CMT)
- Comma vs. semicolon fixes
-----BEGIN PGP SIGNATURE-----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=h6YX
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"Updates for timekeeping, timers and related drivers:
Core:
- Early boot support for the NMI safe timekeeper by utilizing
local_clock() up to the point where timekeeping is initialized.
This allows printk() to store multiple timestamps in the ringbuffer
which is useful for coordinating dmesg information across a fleet
of machines.
- Provide a multi-timestamp accessor for printk()
- Make timer init more robust by checking for invalid timer flags.
- Comma vs semicolon fixes
Drivers:
- Support for new platforms in existing drivers (SP804 and Renesas
CMT)
- Comma vs semicolon fixes
* tag 'timers-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/armada-370-xp: Use semicolons rather than commas to separate statements
clocksource/drivers/mps2-timer: Use semicolons rather than commas to separate statements
timers: Mask invalid flags in do_init_timer()
clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit mode
clocksource/drivers/sp804: Add support for Hisilicon sp804 timer
clocksource/drivers/sp804: Support non-standard register offset
clocksource/drivers/sp804: Prepare for support non-standard register offset
clocksource/drivers/sp804: Remove a mismatched comment
clocksource/drivers/sp804: Delete the leading "__" of some functions
clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.h
clocksource/drivers/sp804: Cleanup clk_get_sys()
dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support
dt-bindings: timer: renesas,cmt: Document r8a7742 CMT support
alarmtimer: Convert comma to semicolon
timekeeping: Provide multi-timestamp accessor to NMI safe timekeeper
timekeeping: Utilize local_clock() for NMI safe timekeeper during early boot
Pull v5.10 RCU changes from Paul E. McKenney:
- Debugging for smp_call_function().
- Strict grace periods for KASAN. The point of this series is to find
RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD
Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is
further disabled by dfefault. Finally, the help text includes
a goodly list of scary caveats.
- New smp_call_function() torture test.
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
do_init_timer() accepts any combination of timer flags handed in by the
caller without a sanity check, but only TIMER_DEFFERABLE, TIMER_PINNED and
TIMER_IRQSAFE are valid.
If the supplied flags have other bits set, this could result in
malfunction. If bits are set in TIMER_CPUMASK the first timer usage could
deference a cpu base which is outside the range of possible CPUs. If
TIMER_MIGRATION is set, then the switch_timer_base() will live lock.
Prevent that with a sanity check which warns when invalid flags are
supplied and masks them out.
[ tglx: Made it WARN_ON_ONCE() and added context to the changelog ]
Signed-off-by: Qianli Zhao <zhaoqianli@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/9d79a8aa4eb56713af7379f99f062dedabcde140.1597326756.git.zhaoqianli@xiaomi.com
This should make it harder for the kernel to corrupt the debug object
descriptor, used to call functions to fixup state and track debug objects,
by moving the structure to read-only memory.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815004027.2046113-3-swboyd@chromium.org
Latch sequence counters are a multiversion concurrency control mechanism
where the seqcount_t counter even/odd value is used to switch between
two data storage copies. This allows the seqcount_t read path to safely
interrupt its write side critical section (e.g. from NMIs).
Initially, latch sequence counters were implemented as a single write
function, raw_write_seqcount_latch(), above plain seqcount_t. The read
path was expected to use plain seqcount_t raw_read_seqcount().
A specialized read function was later added, raw_read_seqcount_latch(),
and became the standardized way for latch read paths. Having unique read
and write APIs meant that latch sequence counters are basically a data
type of their own -- just inappropriately overloading plain seqcount_t.
The seqcount_latch_t data type was thus introduced at seqlock.h.
Use that new data type instead of seqcount_raw_spinlock_t. This ensures
that only latch-safe APIs are to be used with the sequence counter.
Note that the use of seqcount_raw_spinlock_t was not very useful in the
first place. Only the "raw_" subset of seqcount_t APIs were used at
timekeeping.c. This subset was created for contexts where lockdep cannot
be used. seqcount_LOCKTYPE_t's raison d'être -- verifying that the
seqcount_t writer serialization lock is held -- cannot thus be done.
References: 0c3351d451 ("seqlock: Use raw_ prefix instead of _no_lockdep")
References: 55f3560df9 ("seqlock: Extend seqcount API with associated locks")
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200827114044.11173-6-a.darwish@linutronix.de
Latch sequence counters have unique read and write APIs, and thus
seqcount_latch_t was recently introduced at seqlock.h.
Use that new data type instead of plain seqcount_t. This adds the
necessary type-safety and ensures only latching-safe seqcount APIs are
to be used.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200827114044.11173-5-a.darwish@linutronix.de
sched_clock uses seqcount_t latching to switch between two storage
places protected by the sequence counter. This allows it to have
interruptible, NMI-safe, seqcount_t write side critical sections.
Since 7fc26327b7 ("seqlock: Introduce raw_read_seqcount_latch()"),
raw_read_seqcount_latch() became the standardized way for seqcount_t
latch read paths. Due to the dependent load, it has one read memory
barrier less than the currently used raw_read_seqcount() API.
Use raw_read_seqcount_latch() for the suspend path.
Commit aadd6e5caa ("time/sched_clock: Use raw_read_seqcount_latch()")
missed changing that instance of raw_read_seqcount().
References: 1809bfa44e ("timers, sched/clock: Avoid deadlock during read from NMI")
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200715092345.GA231464@debian-buster-darwi.lab.linutronix.de
Replace a comma between expression statements by a semicolon.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200818062651.21680-1-vulab@iscas.ac.cn
Currently, can_stop_idle_tick() prints "NOHZ: local_softirq_pending HH"
(where "HH" is the hexadecimal softirq vector number) when one or more
non-RCU softirq handlers are still enabled when checking to stop the
scheduler-tick interrupt. This message is not as enlightening as one
might hope, so this commit changes it to "NOHZ tick-stop error: Non-RCU
local softirq work is pending, handler #HH".
Reported-by: Andy Lutomirski <luto@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
printk wants to store various timestamps (MONOTONIC, REALTIME, BOOTTIME) to
make correlation of dmesg from several systems easier.
Provide an interface to retrieve all three timestamps in one go.
There are some caveats:
1) Boot time and late sleep time injection
Boot time is a racy access on 32bit systems if the sleep time injection
happens late during resume and not in timekeeping_resume(). That could be
avoided by expanding struct tk_read_base with boot offset for 32bit and
adding more overhead to the update. As this is a hard to observe once per
resume event which can be filtered with reasonable effort using the
accurate mono/real timestamps, it's probably not worth the trouble.
Aside of that it might be possible on 32 and 64 bit to observe the
following when the sleep time injection happens late:
CPU 0 CPU 1
timekeeping_resume()
ktime_get_fast_timestamps()
mono, real = __ktime_get_real_fast()
inject_sleep_time()
update boot offset
boot = mono + bootoffset;
That means that boot time already has the sleep time adjustment, but
real time does not. On the next readout both are in sync again.
Preventing this for 64bit is not really feasible without destroying the
careful cache layout of the timekeeper because the sequence count and
struct tk_read_base would then need two cache lines instead of one.
2) Suspend/resume timestamps
Access to the time keeper clock source is disabled accross the innermost
steps of suspend/resume. The accessors still work, but the timestamps
are frozen until time keeping is resumed which happens very early.
For regular suspend/resume there is no observable difference vs. sched
clock, but it might affect some of the nasty low level debug printks.
OTOH, access to sched clock is not guaranteed accross suspend/resume on
all systems either so it depends on the hardware in use.
If that turns out to be a real problem then this could be mitigated by
using sched clock in a similar way as during early boot. But it's not as
trivial as on early boot because it needs some careful protection
against the clock monotonic timestamp jumping backwards on resume.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814115512.159981360@linutronix.de
During early boot the NMI safe timekeeper returns 0 until the first
clocksource becomes available.
This prevents it from being used for printk or other facilities which today
use sched clock. sched clock can be available way before timekeeping is
initialized.
The obvious workaround for this is to utilize the early sched clock in the
default dummy clock read function until a clocksource becomes available.
After switching to the clocksource clock MONOTONIC and BOOTTIME will not
jump because the timekeeping_init() bases clock MONOTONIC on sched clock
and the offset between clock MONOTONIC and BOOTTIME is zero during boot.
Clock REALTIME cannot provide useful timestamps during early boot up to
the point where a persistent clock becomes available, which is either in
timekeeping_init() or later when the RTC driver which might depend on I2C
or other subsystems is initialized.
There is a minor difference to sched_clock() vs. suspend/resume. As the
timekeeper clock source might not be accessible during suspend, after
timekeeping_suspend() timestamps freeze up to the point where
timekeeping_resume() is invoked. OTOH this is true for some sched clock
implementations as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814115512.041422402@linutronix.de
Switch over time namespaces to use the newly introduced common lifetime
counter.
Currently every namespace type has its own lifetime counter which is stored
in the specific namespace struct. The lifetime counters are used
identically for all namespaces types. Namespaces may of course have
additional unrelated counters and these are not altered.
This introduces a common lifetime counter into struct ns_common. The
ns_common struct encompasses information that all namespaces share. That
should include the lifetime counter since its common for all of them.
It also allows us to unify the type of the counters across all namespaces.
Most of them use refcount_t but one uses atomic_t and at least one uses
kref. Especially the last one doesn't make much sense since it's just a
wrapper around refcount_t since 2016 and actually complicates cleanup
operations by having to use container_of() to cast the correct namespace
struct out of struct ns_common.
Having the lifetime counter for the namespaces in one place reduces
maintenance cost. Not just because after switching all namespaces over we
will have removed more code than we added but also because the logic is
more easily understandable and we indicate to the user that the basic
lifetime requirements for all namespaces are currently identical.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/159644982033.604812.9406853013011123238.stgit@localhost.localdomain
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the counter
read function when time namespace support is enabled. Adding the pointer
is a NOOP for all other architectures because the compiler is supposed
to optimize that out when it is unused in the architecture specific
inline. The change also solved a similar problem for MIPS which
fortunately has time namespaces not yet enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another sequence
counter in the S390 implementation. A better solution is to utilize the
already existing VDSO sequence count for this. The core code now exposes
helper functions which allow to serialize against the timekeeper code
and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It now has
an embedded architecture specific struct embedded which defaults to an
empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support to
work from a common upstream base.
- A trivial comment fix.
-----BEGIN PGP SIGNATURE-----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=y8Z5
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"A set of timekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the
counter read function when time namespace support is enabled.
Adding the pointer is a NOOP for all other architectures because
the compiler is supposed to optimize that out when it is unused in
the architecture specific inline. The change also solved a similar
problem for MIPS which fortunately has time namespaces not yet
enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another
sequence counter in the S390 implementation. A better solution is
to utilize the already existing VDSO sequence count for this. The
core code now exposes helper functions which allow to serialize
against the timekeeper code and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It
now has an embedded architecture specific struct embedded which
defaults to an empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support
to work from a common upstream base.
- A trivial comment fix"
* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Delete repeated words in comments
lib/vdso: Allow to add architecture-specific vdso data
timekeeping/vsyscall: Provide vdso_update_begin/end()
vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
posix CPU timers into task work context. The tick interrupt is reduced to a
quick check which queues the work which is doing the heavy lifting before
returning to user space or going back to guest mode. Moving this out is
deferring the signal delivery slightly but posix CPU timers are inaccurate
by nature as they depend on the tick so there is no real damage. The
relevant test cases all passed.
This lifts the last offender for RT out of the hard interrupt context tick
handler, but it also has the general benefit that the actual heavy work is
accounted to the task/process and not to the tick interrupt itself.
Further optimizations are possible to break long sighand lock hold and
interrupt disabled (on !RT kernels) times when a massive amount of posix
CPU timers (which are unpriviledged) is armed for a task/process.
This is currently only enabled for x86 because the architecture has to
ensure that task work is handled in KVM before entering a guest, which was
just established for x86 with the new common entry/exit code which got
merged post 5.8 and is not the case for other KVM architectures.
-----BEGIN PGP SIGNATURE-----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=Reot
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more timer updates from Thomas Gleixner:
"A set of posix CPU timer changes which allows to defer the heavy work
of posix CPU timers into task work context. The tick interrupt is
reduced to a quick check which queues the work which is doing the
heavy lifting before returning to user space or going back to guest
mode. Moving this out is deferring the signal delivery slightly but
posix CPU timers are inaccurate by nature as they depend on the tick
so there is no real damage. The relevant test cases all passed.
This lifts the last offender for RT out of the hard interrupt context
tick handler, but it also has the general benefit that the actual
heavy work is accounted to the task/process and not to the tick
interrupt itself.
Further optimizations are possible to break long sighand lock hold and
interrupt disabled (on !RT kernels) times when a massive amount of
posix CPU timers (which are unpriviledged) is armed for a
task/process.
This is currently only enabled for x86 because the architecture has to
ensure that task work is handled in KVM before entering a guest, which
was just established for x86 with the new common entry/exit code which
got merged post 5.8 and is not the case for other KVM architectures"
* tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Select POSIX_CPU_TIMERS_TASK_WORK
posix-cpu-timers: Provide mechanisms to defer timer handling to task_work
posix-cpu-timers: Split run_posix_cpu_timers()
- Untangle the header spaghetti which causes build failures in various
situations caused by the lockdep additions to seqcount to validate that
the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict per
CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot
validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored and
write_seqcount_begin() has a lockdep assertion to validate that the
lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API is
unchanged and determines the type at compile time with the help of
_Generic which is possible now that the minimal GCC version has been
moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs which
have been addressed already independent of this.
While generaly useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if the
writers are serialized by an associated lock, which leads to the well
known reader preempts writer livelock. RT prevents this by storing the
associated lock pointer independent of lockdep in the seqcount and
changing the reader side to block on the lock when a reader detects
that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and initializers.
-----BEGIN PGP SIGNATURE-----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=7Gj+
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
Drop repeated words in kernel/time/. {when, one, into}
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200807033248.8452-1-rdunlap@infradead.org
Frederic Weisbecker