Commit Graph

822 Commits

Author SHA1 Message Date
David Howells d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
David Howells c788732523 Mark arguments to certain syscalls as being const
Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13 16:53:13 -07:00
Mike Frysinger f507442962 Blackfin: add support for dynamic ftrace
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:54 -04:00
Michael Hennerich 382dbe5b39 Blackfin: portmux: fix peripheral map overflow when requesting pins
Some processors have groups of pins that aren't an even number of 16.
This causes the array size calculation to under count the number of
needed entries due to integer truncation.  So on the BF51x, while we
should have 3 bitmaps (41 / 16), we end up with 2 and pin requests for
the 3rd bank end up scribbling over the top of the GPIO IRQ array.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:53 -04:00
Michael Hennerich 7a4a207e74 Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger options
Newer parts have optional Hysteresis/Schmitt Trigger options to help with
dirty signals.  So add some kconfig options for tuning this and enable it
by default for people.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:52 -04:00
Mike Frysinger 812ae98f08 Blackfin: gpio/portmux: clean up whitespace corruption
Random tabs instead of spaces, mixes of the two, and unicode spaces
instead of ascii spaces.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:51 -04:00
Michael Hennerich d1401e1dc2 Blackfin: fix DMA/cache bug when resuming from suspend to RAM
The dma_memcpy() function takes care of flushing different caches for us.
Normally this is what we want, but when resuming from mem, we don't yet
have caches enabled.  If these functions happen to be placed into L1 mem
(which is what we're trying to relocate), then things aren't going to
work.  So define a non-cache dma_memcpy() variant to utilize in situations
like this.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:50 -04:00
Mike Frysinger 332824b835 Blackfin: gpio: unify & clean up reserved map handling
The duplicated bit banging logic is getting out of hand, so unify the
local API to make management a lot easier.  This also makes the code
a lot easier to follow.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:47 -04:00
Mike Frysinger 1ed181f248 Blackfin: move MPU anomaly check to common location
Keep all anomaly/arch checks in one place to keep logic simple.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:45 -04:00
Mike Frysinger d49e8e7e5a Blackfin: use common EXCEPTION_TABLE() in vmlinux.lds
Rather than do our own thing, use what common code provides.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:45 -04:00
Mike Frysinger 9c1a125921 ptrace: unify FDPIC implementations
The Blackfin/FRV/SuperH guys all have the same exact FDPIC ptrace code in
their arch handlers (since they were probably copied & pasted).  Since
these ptrace interfaces are an arch independent aspect of the FDPIC code,
unify them in the common ptrace code so new FDPIC ports don't need to copy
and paste this fundamental stuff yet again.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:44 -07:00
Linus Torvalds 064e297c32 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (30 commits)
  Blackfin: SMP: fix continuation lines
  Blackfin: acvilon: fix timeout usage for I2C
  Blackfin: fix typo in BF537 IRQ comment
  Blackfin: unify duplicate MEM_MT48LC32M8A2_75 kconfig options
  Blackfin: set ARCH_KMALLOC_MINALIGN
  Blackfin: use atomic kmalloc in L1 alloc so it too can be atomic
  Blackfin: another year of changes (update copyright in boot log)
  Blackfin: optimize strncpy a bit
  Blackfin: isram: clean up ITEST_COMMAND macro and improve the selftests
  Blackfin: move string functions to normal lib/ assembly
  Blackfin: SIC: cut down on IAR MMR reads a bit
  Blackfin: bf537-minotaur: fix build errors due to header changes
  Blackfin: kgdb: pass up the CC register instead of a 0 stub
  Blackfin: handle HW errors in the new "FAULT" printing code
  Blackfin: show the whole accumulator in the pseudo DBG insn
  Blackfin: support all possible registers in the pseudo instructions
  Blackfin: add support for the DBG (debug output) pseudo insn
  Blackfin: change the BUG opcode to an unused 16-bit opcode
  Blackfin: allow NMI watchdog to be used w/RETN as a scratch reg
  Blackfin: add support for the DBGA (debug assert) pseudo insn
  ...
2010-05-24 08:02:58 -07:00
Mike Frysinger be1577e378 Blackfin: another year of changes (update copyright in boot log)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:11 -04:00
Robin Getz 479ba60358 Blackfin: move string functions to normal lib/ assembly
Since 'extern inline' doesn't work correctly in the context of the Linux
kernel (too many overriding defines), move the string functions to normal
lib/ assembly files (like the existing mem funcs).  This avoids the forced
inline all over the kernel and allows us to place them constantly in L1.

This also avoids some module failures when gcc inserts calls to string
functions but the kernel build system doesn't fully consult the library
archives.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:09 -04:00
Mike Frysinger d2db97bf6b Blackfin: kgdb: pass up the CC register instead of a 0 stub
While the CC pseudo register can be deduced from the ASTAT register, make
sure we set its value correctly instead of always stubbing it out as 0.
GDB itself looks at this pseudo register instead of ASTAT, so we have to
supply the right value.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:07 -04:00
Robin Getz a80d5f449d Blackfin: handle HW errors in the new "FAULT" printing code
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:07 -04:00
Robin Getz a6d9dbf5e4 Blackfin: show the whole accumulator in the pseudo DBG insn
Rather than print just part of the accumulator register, show the whole
40 bits.  This matches the simulator behavior better.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:06 -04:00
Robin Getz 5a132f7aeb Blackfin: support all possible registers in the pseudo instructions
Rather than decoding just the common R/P registers, handle all of them.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:05 -04:00
Robin Getz dc89d97fc7 Blackfin: add support for the DBG (debug output) pseudo insn
Another pseudo insn used by Blackfin simulators.  Also factor some now
common register lookup code out of the DBGA handlers.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:05 -04:00
Robin Getz 6ce3e9c2a2 Blackfin: add support for the DBGA (debug assert) pseudo insn
A few pseudo debug insns exist to make testing of simulators easier.
Since these don't actually exist in the hardware, we have to have the
exception handler take care of emulating these.  This allows sim test
cases to be executed unmodified under Linux and thus simplify debugging
greatly.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:18:56 -04:00
Robin Getz 9a95e2f100 Blackfin: make hardware trace output a little more useful
Decode the vast majority of insns that appear in the trace buffer to get a
better idea of what's going on at a glance.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:19 -04:00
Robin Getz d60805ad47 Blackfin: print out the faulting insn in the trace output
Print out the faulting instruction so when people send traces as part of
bug reports, we have a better idea of what is going on.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:19 -04:00
Robin Getz d28cff4b61 Blackfin: remove CONFIG_DEBUG_VERBOSE from trace.c
Now that the split traps code has moved all the verbose output to the
trace.c file, we can unify all the CONFIG_DEBUG_VERBOSE handling.  This
gets rid of much of the crappy ifdef forest and enables usage of normal
pr_xxx functions so checkpatch stops complaining.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:18 -04:00
Robin Getz 2a12c4632d Blackfin: split kernel/traps.c
The current kernel/traps.c file has grown a bit unwieldy as more debugging
functionality has been added over time, so split it up into more logical
files.  There should be no functional changes here, just minor whitespace
tweaking.  This should make future extensions easier to manage.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:17 -04:00
Michael Hennerich bb84dbf69b Blackfin: punt Blackfin-specific GPIO wakeup API
This patch removes a custom GPIO wakeup API which allowed GPIOs to act
as wakeup sources, which are not configured as Interrupts.
This API is a leftover from the time before irq_wake was established.
From now on people must use enable_irq_wake(GPIO_IRQx) and the GPIO in
question needs to be configured as Interrupt.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:16 -04:00
Jason Wessel e8861129d3 kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin
The new debug core api requires all architectures that use to debug
core to implement a function to set the program counter.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-05-20 21:04:20 -05:00
Linus Torvalds 7d02093e29 Merge branch 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  avr32: Fix typo in read_persistent_clock()
  sparc: Convert sparc to use read/update_persistent_clock
  cris: Convert cris to use read/update_persistent_clock
  m68k: Convert m68k to use read/update_persistent_clock
  m32r: Convert m32r to use read/update_peristent_clock
  blackfin: Convert blackfin to use read/update_persistent_clock
  ia64: Convert ia64 to use read/update_persistent_clock
  avr32: Convert avr32 to use read/update_persistent_clock
  h8300: Convert h8300 to use read/update_persistent_clock
  frv: Convert frv to use read/update_persistent_clock
  mn10300: Convert mn10300 to use read/update_persistent_clock
  alpha: Convert alpha to use read/update_persistent_clock
  xtensa: Fix unnecessary setting of xtime
  time: Clean up direct xtime usage in xen
2010-05-19 17:10:06 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
John Stultz cb0e996378 blackfin: Convert blackfin to use read/update_persistent_clock
This patch converts the blackfin architecture to use the generic
read_persistent_clock and update_persistent_clock interfaces, reducing
the amount of arch specific code we have to maintain, and allowing for
further cleanups in the future.

I have not built or tested this patch, so help from arch maintainers
would be appreciated.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1267675049-12337-10-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-13 01:14:12 +01:00
Joachim Eastwood f9c29e872b Blackfin: mark gpio lib functions static
Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:52 -05:00
Joachim Eastwood 7f4f69f991 Blackfin: GPIO: implement to_irq handler
This makes it possible to support IRQs coming from off-chip GPIO
controllers.

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:52 -05:00
Frans Pop 2bc4affe9c Blackfin: remove trailing space in messages
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger ddaebcabbc Blackfin: add support for restart_syscall()
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger 600482c13d Blackfin: fix single stepping over system calls
On Blackfin systems, the hardware single step exception triggers before
the system call exception, so we need to save this info to process it
later on.  Otherwise, single stepping in userspace misses a few insns
right after the system call.

This is based a bit on the SuperH code added in commit 4b505db9c4.

Reported-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger e8f263dfd3 Blackfin: initial tracehook support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger e50e2f25c5 Blackfin: initial regset support
We don't support core dumps (yet?), but this should make things easier.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger f2ce48024a Blackfin: simplify PTRACE_{PEEK,POKE}USR in preperation for regset support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Mike Frysinger 5f09c77d2a Blackfin: simplify SYSCFG code a bit and ignore attempts to change it
We don't want to let user space modify the SYSCFG register arbitrarily as
the settings are system wide (SNEN/CNEN) and can cause misbehavior.  The
only other bit here (SSSTEP) has proper controls via PTRACE_SINGLESTEP.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Christoph Hellwig f5b99627a3 Blackfin: use generic ptrace_resume code
Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT,
PTRACE_KILL and PTRACE_SINGLESTEP.  This implies defining
arch_has_single_step in <asm/ptrace.h> and implementing the
user_enable_single_step and user_disable_single_step functions, which
also causes the breakpoint information to be cleared on fork, which
could be considered a bug fix.

Also the TIF_SYSCALL_TRACE thread flag is now cleared on PTRACE_KILL
which it previously wasn't which is consistent with all architectures
using the modern ptrace code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00
Graf Yang 718340f629 Blackfin: rewrite resync_core_{i,d}cache() SMP logic to avoid per_cpu data
This functions are implicitly called by core functions like cpu_relax(),
and since those functions may be called early on before common code has
initialized the per-cpu data area, we need to tweak the stats gathering.
Now the statistics are maintained in common bss which makes these funcs
safe to use as soon as the C runtime env is setup.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Graf Yang 6c2b7072a7 Blackfin: add support for cpufreq on SMP systems
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Graf Yang 64b33a00dc Blackfin: split watchdog definitions into a dedicated header file
This allows things to be shared between the different watchdog sources.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Mike Frysinger b73faf7449 Blackfin: support new ftrace frame pointer semantics
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Mike Frysinger aebfef0324 Blackfin: implement ftrace mcount test
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:50 -05:00
Graf Yang 60ffdb3654 Blackfin: implement nmi_watchdog for SMP on BF561
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Barry Song 726e96561e Blackfin: respect the L1 kconfig optimization in the MPU code
Restore support for CONFIG_EXCPT_IRQ_SYSC_L1 in the MPU CPLB manager.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Barry Song 5e8d3210b5 Blackfin: fill out the signal si_addr when sending a SIGBUS/SIGSEGV
Some userspace applications use this member in diagnosing crashes.  It
also makes some LTP tests pass (i.e. the Blackfin arch behaves more like
everyone else).

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Graf Yang c6669c223a Blackfin: fix up mm locking in address dumping
The locking code in the address dumper needs to grab the mm's mmap_sem
so that other CPUs do not get an inconsistent view.  On UP systems this
really wasn't a problem, but it is easy to trigger a race on SMP systems
when another CPU removes a mapping.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Mike Frysinger 8d0177dbcb Blackfin: kgdb: mark all local funcs/structs static
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Roel Kluin 48a74f9d1b Blackfin: fix decoding of opcodes 41-47 in decode_instruction()
This condition allowed only decoding of opcode 0x0040

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song d86bfb1600 Blackfin: initial XIP support
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song 8916a1499d Blackfin: fix the section name of init_thread_union
Use the common attribute rather than setting the section name directly.
The common linker script defines expect the newer naming.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song 6feda3a653 Blackfin: replace harcoded define with proper THREAD_SIZE macro
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Jie Zhang 0afc272cc6 Blackfin: fix relocation errors with large initramfs images
Since we are now discarding .exit.text at runtime instead of link time, we
need to place all .text sections ahead of the .data sections.  Otherwise,
a really large attached initramfs may cause link errors as it pushes the
PC relative relocations behind the limits of the Blackfin ISA (~16meg).
The instructions in the .exit.text are unable to call back into the .text
sections leading to a link failure.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Yi Li 0d152c27e3 Blackfin: SMP: make core timers per-cpu clock events for HRT
SMP systems require per-cpu local clock event devices in order to enable
HRT support.  One a BF561, we can use local core timer for this purpose.
Originally, there was one global core-timer clock event device set up for
core A.

To accomplish this feat, we need to split the gptimer0/core timer logic
so that each is a standalone clock event.  There is no requirement that
we only have one clock event source anyways.  Once we have this, we just
define per-cpu clock event devices for each local core timer.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Michael Hennerich edd0799250 Blackfin: gpio: use shorter name
The gpio label size is 16 char, but the current code uses a longer name
resulting in chopped display.  So use a shorter name.

Reported-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Sonic Zhang a3a6a59019 Blackfin: dma-mapping: fix thinko in constant optimization
Make sure the non-constant version of the dma_sync functions actually
complete instead of recursively calling itself forever.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Sonic Zhang 5792ab2a0a Blackfin: MPU: handle caches for reserved memory
We weren't handling the user-specified cache behavior for the reserved
memory regions (via mem=/max_mem=).  The no-MPU code already takes care
of this, so add support to the MPU code as well.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Barry Song e18e7dd334 Blackfin: fix MPU page permission masks overflow when dealing with async memory
Attempting to use the MPU while doing XIP out of parallel flash hooked up
to the async memory bus would often result in random crashes as the MPU
slowly corrupted memory.

The fallout here is that the async banks gain MPU protection from user
space too.  So any accesses have to go through the mmap() interface rather
than just using hardcoded pointers.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Sonic Zhang b635f1912d Blackfin: allow boards to register early devices
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Sonic Zhang 7fe1a91281 blackfin,kgdb: Do not put PC in gdb_regs into retx.
In blackfin, kgdb is running in delayed exception IRQ5 other than in
exception IRQ3 directly.  Register reti other than retx in pt_regs is
the kgdb return address. So, don't put PC in gdb_regs into retx.

CC: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-01-07 11:58:37 -06:00
Jason Wessel 0fde663708 blackfin,kgdb,probe_kernel: Cleanup probe_kernel_read/write
Blackfin needs it own arch specific probe_kernel_read() and
probe_kernel_write().

This was moved out of the kgdb code and into the
arch/blackfin/maccess.c, because it is a generic kernel api.

The arch specific kgdb.c for blackfin was cleaned of all functions
which exist in the kgdb core that do the same thing after resolving
the probe_kernel_read() and probe_kernel_write().  This also
eliminated the need for most of the #include's.

CC: Sonic Zhang <sonic.adi@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-07 11:58:36 -06:00
Linus Torvalds 525995d77c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (88 commits)
  Blackfin: Convert BUG() to use unreachable()
  Blackfin: define __NR_recvmmsg
  Blackfin: drop duplicate sched_clock
  Blackfin: NOMPU: skip DMA ICPLB hole when it is redundant
  Blackfin: MPU: add missing __init markings
  Blackfin: add support for TIF_NOTIFY_RESUME
  Blackfin: kgdb_test: clean up code a bit
  Blackfin: convert kgdbtest to proc_fops
  Blackfin: convert cyc2ns() to clocksource_cyc2ns()
  Blackfin: ip0x: pull in asm/portmux.h for P_xxx defines
  Blackfin: drop unused ax88180 resources
  Blackfin: bf537-stamp: add ADF702x network driver resources
  Blackfin: bf537-stamp: add CAN resources
  Blackfin: bf537-stamp: add AD5258 i2c address
  Blackfin: bf537-stamp: add adau1761 i2c address
  Blackfin: bf537-stamp: add adau1371 i2c address
  Blackfin: bf537-stamp: add ADP8870 resources
  Blackfin: bf537-stamp: kill AD714x board-specific Kconfigs
  Blackfin: bf537-stamp: update ADP5520 resources
  Blackfin: bf537-stamp: add ADXL346 orientation sensing support
  ...
2009-12-16 10:52:35 -08:00
Linus Torvalds 74f3ae7434 Merge branch 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'module' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  modpost: fix segfault with short symbol names
  module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y
  Kbuild: clear marker out of modpost
  module: make MODULE_SYMBOL_PREFIX into a CONFIG option
  ARM: unexport symbols used to implement floating point emulation
  ARM: use unified discard definition in linker script
  x86: don't export inline function
  sparc64: don't export static inline pci_ functions
2009-12-16 10:47:24 -08:00
Alan Jenkins 9e1b9b8072 module: make MODULE_SYMBOL_PREFIX into a CONFIG option
The next commit will require the use of MODULE_SYMBOL_PREFIX in
.tmp_exports-asm.S.  Currently it is mixed in with C structure
definitions in "asm/module.h".  Move the definition of this arch option
into Kconfig, so it can be easily accessed by any code.

This also lets modpost.c use the same definition.  Previously modpost
relied on a hardcoded list of architectures in mk_elfconfig.c.

A build test for blackfin, one of the two MODULE_SYMBOL_PREFIX archs,
showed the generated code was unchanged.  vmlinux was identical save
for build ids, and an apparently randomized suffix on a single "__key"
symbol in the kallsyms data).

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Mike Frysinger <vapier@gentoo.org> (blackfin)
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-12-15 16:28:26 +10:30
Mike Frysinger 8a833110f1 Blackfin: drop duplicate sched_clock
The Blackfin sched_clock() func is pretty much a duplicate of the common
version, so just punt it.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:56 -05:00
Mike Frysinger a797a0e242 Blackfin: NOMPU: skip DMA ICPLB hole when it is redundant
Normally there is no user-reserved memory after the DMA region which means
there is no user-reserved ICPLB coverage.  So the DMA hole can be covered
by the large hole that is always added to cover up to the async bank.  We
only need an explicit DMA whole when we also add an explicit mapping for
the user-reserved memory.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:54 -05:00
Mike Frysinger 0a68b5341d Blackfin: MPU: add missing __init markings
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:53 -05:00
Barry Song d1be2e485b Blackfin: add support for TIF_NOTIFY_RESUME
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:52 -05:00
Mike Frysinger 88f7c2fb0f Blackfin: kgdb_test: clean up code a bit
- document simple global symbols
- convert printk to pr_*
- clean up spurious whitespace
- use min_t()

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:50 -05:00
Alexey Dobriyan 397b761cc4 Blackfin: convert kgdbtest to proc_fops
The read_proc and write_proc interfaces are going to be removed in the
common kernel code.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:49 -05:00
Mike Frysinger c768a943fd Blackfin: convert cyc2ns() to clocksource_cyc2ns()
The former no longer exists.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:47 -05:00
Barry Song dd3b0e3e6a Blackfin: dma-mapping.h: flesh out missing DMA mapping functions
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:01 -05:00
Barry Song a00b4fe5ce Blackfin: workaround anomaly 05000310
While fetching instructions at the boundary of L1 instruction SRAM, a false
External Memory Addressing Error might be triggered.  We should ignore this
and continue on our way to avoid random crashes.

Because hardware errors are not exact in the Blackfin architecture, we need
to catch a few more common cases when the code flow changes and the signal
is finally delivered.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:59 -05:00
Mike Frysinger 340a1be1ee Blackfin: drop ptrace() write support for fixed code/bootrom
These regions are either read-only and won't work anyways (bootrom), or
we don't want people screwing with them because they're shared between
all processes (fixed code).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:57 -05:00
Barry Song e187837b6f Blackfin: MPU: support XIP in async flash memory
The NOMPU code already supported executing in the async banks, so this
brings the MPU code in line.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:54 -05:00
Barry Song d45e8db1b2 Blackfin: drop 4KB reserve at end of memory
The point of this small chunk was to avoid anomaly 05000310.  This never
really seemed to do what it was intended though -- no valid CPLBs exist
over the reserved memory, and there is often memory before it anyways (due
to the uClinux MTD and/or reserved DMA region).  Plus, it doesn't address
the L1 instruction case.

So drop this chunk as it wastes memory and is affront to humanity.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:50 -05:00
Barry Song c45c06596e Blackfin: support smaller uncached DMA chunks for memory constrained systems
When working with 8 meg systems, forcing a 1 meg DMA chunk heavily cuts
into the available resources.  So support smaller chunks to better cover
needs for these systems.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:48 -05:00
Mike Frysinger 2f5a086402 Blackfin: finish_atomic_sections: optimize the RTS step
No point in returning to userspace just to have it immediately perform the
RTS step.  We have to update the PC anyways, so do the RTS too.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:42 -05:00
Sonic Zhang 0d5e35940b Blackfin: kgdb: punt dead code
None of these vars/funcs were being used.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:40 -05:00
Mike Frysinger e34132f40b Blackfin: reject NULL callback in set_dma_callback()
It makes no sense to call this function with a NULL callback.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:37 -05:00
Mike Frysinger 8c0b4351cc Blackfin: gptimers: use unsigned timer/group ids
Since we always use these ids as unsigned values, and we have some assert
code to make sure they don't exceed a limit, avoid signed issues.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:30 -05:00
Robin Getz dbc5e6989e Blackfin: don't walk VMAs when oopsing
If we're double faulting, then we have to assume the VMAs are not safe as
broken pointers here will prevent full trace output for the double fault.
Shouldn't be a big problem though as rarely is a double fault caused by
code in userspace.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:28 -05:00
Philippe Gerum d2685fb7b4 Blackfin/ipipe: prepare status bitops for SMP support
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Li Yi <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:12 -05:00
Mike Frysinger 13a1320cf5 Blackfin: don't give CPU its own line in traps output
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:05 -05:00
Robin Getz 7a1a8cc190 Blackfin: announce current cpu rev when booting
User reports rarely include full information, so include this important
tidbit up front.  It's also good to know at a glance in general.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:01 -05:00
Mike Frysinger d2e015d65f Blackfin: convert DMA mutex to an atomic and drop redundant code
The DMA channel status field was encoding redundant info wrt the DMA MMR
config register, and it was doing an incomplete job of checking all DMA
channels (some drivers write directly to the config register).  So drop
the tristate field in favor of a binary atomic field.  This simplifies
the code in general, removes the implicit need for sleeping, and forces
the suspend code to handle all channels properly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:18 -05:00
Mike Frysinger bbc51e97d3 Blackfin: push down asm/ includes and out of bfin-global.h
Avoid including unnecessary headers all the time as well as circular
includes with core requirements.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:14 -05:00
Michael Hennerich 621dd24743 Blackfin: bf538: add support for extended GPIO banks
The GPIOs on ports C/D/E on the BF538/BF539 do not behave the same way as
the other ports on the part and the same way as all other Blackfin parts.
The MMRs are programmed slightly different and they cannot be used to
generate interrupts or wakeup a sleeping system.  Since these guys don't
fit into the existing code, create a simple gpiolib driver for them.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:05 -05:00
Mike Frysinger 5cd82a6d58 Blackfin: calculate on-chip lengths at link time rather than run time
Since the link sizes never change at runtime, push the calculation out to
the linker script to save some useless calculation costs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:55 -05:00
Bernd Schmidt 13048f8866 Blackfin: improve async bank access checking (for cross-banks & XIP)
The access_ok() function did not accept ranges within the async banks
which made it impossible to do XIP in flash.  Fixing that also showed
that the current bfin_mem_access_type() code did not work with accesses
that spanned async banks (like a file system).  So split out and fix the
async bank checks so that all these scenarios work as expected.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:52 -05:00
Michael Hennerich cb5ae60f7a Blackfin: convert DMA code to a proper bitmap
Rather than using our own data structures that basically boil down to a
bitmap, use the standard bitmap functions.

Reported-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:51 -05:00
Barry Song 89e84eeace Blackfin: add some bounds checking to peripheral_request
The requested peripheral is turned into an index into some state arrays,
so make sure the calculated index doesn't exceed the index.  This occurs
when using bogus pin values or the define headers are screwed up.  Now
we'll notice right away that something needs fixing instead of trying to
track down random memory corruption.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:46 -05:00
Yi Li 298571249a Blackfin: use common code for cycle->nanosecond conversion
No point in redefining things that common code already does for us.  Also
use CYC2NS_SCALE_FACTOR to better reflect reality and for better precision.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:43 -05:00
Yi Li ceb33be95a Blackfin: unify sched_clock() handling between clock sources
Currently sched_clock() is only defined when using CYCLES as a clock
source.  Declare sched_clock() in common code and mark it with notrace to
prevent invoking sched_clock() recursively (because ftrace uses
sched_clock() to record time).

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:41 -05:00
Yi Li f7036d649c Blackfin: fix gptimer0 clock source compile warning
Some of the clocksource prototypes were updated, but the gptimer0 func was
missed in the process.  Not a big issue as the argument is ignored, but we
should fix the compile warning anyways.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:13:38 -05:00
Thomas Gleixner 239007b844 genirq: Convert irq_desc.lock to raw_spinlock
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 23:55:33 +01:00
Al Viro f8b7256096 Unify sys_mmap*
New helper - sys_mmap_pgoff(); switch syscalls to using it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-11 06:44:29 -05:00
Linus Torvalds 4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Linus Torvalds 2588465bad Merge branch 'bkl-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'bkl-arch-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mn10300: Remove the BKL from sys_execve
  m68knommu: Remove the BKL from sys_execve
  m68k: Remove the BKL from sys_execve
  h83000: Remove BKL from sys_execve
  frv: Remove the BKL from sys_execve
  blackfin: Remove the BKL from sys_execve
  um: Remove BKL from mmapper
  um: Remove BKL from random
  s390: Remove BKL from prng
2009-12-09 08:07:51 -08:00
Jiri Kosina d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Graf Yang aa23531ce5 Blackfin: fix SMP build error in start_thread()
Commit d5ce528c8e (Blackfin: convert irq/process to asm-generic)
incorrectly merged the smp and non-smp cases of start_thread() causing the
L1 stack to be setup on the SMP port instead of the UP port.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:38:01 -05:00
Jie Zhang 46b60faf8c Blackfin: fix typo in ptrace poking
Commit c014e15a2f (Blackfin: convert ptrace to new memory functions)
introduced a copy & paste typo in the ptrace poke data/text handling.  The
access_process_vm() function call was telling it to read instead of write.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:43 -05:00
André Goddard Rosa 7bae2c4898 Blackfin: fix cache Kconfig typo
The Kconfig option is "BFIN_EXTMEM_WRITETHROUGH", not "..._WRITETROUGH".

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:35 -05:00
Michael Hennerich 865bddfbf7 Blackfin: fix suspend/resume failure with some on-chip ROMs
Some Blackfin on-chip ROMs utilize some MDMA channels during the suspend
and resume process, but don't clean up after themselves.  So manually
clear all DMA channels when resuming since no DMA could have been running
at this point in time.  Now Linux should be able to work regardless of any
laziness on the part of the on-chip ROM or boot loader.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:33 -05:00
John Kacur 25708a5fe7 blackfin: Remove the BKL from sys_execve
This looks like a cut-and-paste job. For example, compare this
function to sys_execve in arch/x86/kernel/process_64.c and it is
almost line by line the same, except the one in x86 nolonger has the
big kernel lock. All of the functions called between the lock are
generic and not specific to blackfin - thus, I believe it is safe to
remove the bkl here.

Signed-off-by: John Kacur <jkacur@redhat.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
LKML-Reference: <alpine.LFD.2.00.0910130007240.3658@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-10-14 17:18:14 +02:00
Alexey Dobriyan d43c36dc6b headers: remove sched.h from interrupt.h
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-11 11:20:58 -07:00
Thomas Chou 59bd00c850 Blackfin: fix framebuffer mmap bug for nommu
The patch added a special get_unmapped_area for framebuffer which
was hooked to the file ops in drivers/video/fbmem.c.

This is needed since v2.6.29-rc1 where nommu vma management was
updated, and mmap of framebuffer caused kernel BUG panic. You may turn
on "Debug the global anon/private NOMMU mapping region tree" config to
such message.

As Documentation/nommu-mmap.txt said,
"To provide shareable character device support, a driver must provide
a file->f_op->get_unmapped_area() operation. The mmap() routines will
call this to get a proposed address for the mapping."

With this change, user space should call mmap for framebuffer using
shared map. Or it can try shared map first, then private map if
failed. This shared map usage is now consistent between mmu and nommu.

The sys_ file may not be a good place for this patch. But there is a
similar one for sparc. I tested a similar patch on nios2nommu, though
I don't have a blackfin board to test.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:15 -04:00
Mike Frysinger 48dee09325 Blackfin: cplbinfo: drop d_path() hacks
The cplbinfo was using d_path() to figure out which cpu/cplb was being
parsed.  As Al pointed out, this isn't exactly reliable as it assumes the
static VFS path to be unchanged, and it's just poor form.  So use the
proc_create_data() to properly (and internally) pass the exact cpu/cplb
requested to the parser function.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:48:04 -04:00
Robin Getz 96f1050d3d Blackfin: mass clean up of copyright/licensing info
Bill Gatliff & David Brownell pointed out we were missing some
copyrights, and licensing terms in some of the files in
./arch/blackfin, so this fixes things, and cleans them up.

It also removes:
 - verbose GPL text(refer to the top level ./COPYING file)
 - file names (you are looking at the file)
 - bug url (it's in the ./MAINTAINERS file)
 - "or later" on GPL-2, when we did not have that right

It also allows some Blackfin-specific assembly files to be under a BSD
like license (for people to use them outside of Linux).

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:36:26 -04:00
john stultz 10f03f1a24 Blackfin: convert to use arch_gettimeoffset()
Convert Blackfin to use GENERIC_TIME via the arch_getoffset()
infrastructure, reducing the amount of arch specific code we need to
maintain.

I've taken my best swing at converting this, but I'm not 100% confident
I got it right.  My cross-compiler is now out of date (gcc4.2) so I
wasn't able to check if it compiled. Any assistance from arch
maintainers or testers to get this merged would be great.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:36:20 -04:00
Tim Abbott 4a5e35135d blackfin: Cleanup linker script using new linker script macros.
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 17:16:22 -07:00
Yi Li 5bf9cbef99 Blackfin: update ftrace for latest toolchain
The mcount support that was finally added to the Blackfin gcc port isn't
exactly the same as what ftrace was developed against.  Now that the final
gcc version is in place, update the ftrace code to match.

While updating this, fix the swapped arguments to the tracer (signature is
(ip, parent_ip) while we were passing (parent_ip, ip)).

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:52 -04:00
Mike Frysinger ea426e6c62 Blackfin: unify cache init functions
The CPLB implementations (mpu/nompu) had exact copies of the cacheinit
code.  Even the i/d cache functions are largely the same.  So unify them
both in the common kernel cache code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:49 -04:00
Graf Yang e78feaaeeb Blackfin: swap clocksource ratings for gptimer/cycles
The cycles clocksource is a higher resolution than the gptimer one, so
make sure the ratings field reflects this.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:48 -04:00
Mike Frysinger 3289651a97 Blackfin: update ftrace_push_return_trace() breakage
Commit 71e308a239 updated ftrace_push_return_trace() prototype but didn't
update the Blackfin ftrace code, so things broke.  Since we don't support
the new stuff yet, call it with stub values.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:47 -04:00
Bernd Schmidt 4663f6ef25 Blackfin: add ICPLB coverage for async banks
When doing XIP, we need to execute out of the async banks, so we need
ICPLBs to allow this.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:42 -04:00
Mingquan Pan 4a3e53c1c4 Blackfin: use KERN_ALERT in all kgdb_test output
Most messages are already using KERN_ALERT, so be consistent to make
things easier to check with test scripts.

Signed-off-by: Mingquan Pan <grace.pan@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:40 -04:00
Michael Hennerich 05d17dfaab Blackfin: fix spelling in a few comments
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:33 -04:00
Yi Li b6dbde27dd Blackfin: use raw_smp_processor_id() in exception code
When preempt debugging is enabled, smp_processor_id() may utilize the
"current" structure.  This may not be safe to access under all exceptions
due to it being in dynamically allocated memory.  So in exception code,
make sure we use raw_smp_processor_id() instead to get at the real value
directly.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:32 -04:00
Michael Hennerich 00dd66d012 Blackfin: remove useless duplicated assignment in gpio code
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:31 -04:00
Ingo Molnar 8d7ac69ffa Blackfin: Fix link errors with binutils 2.19 and GCC 4.3
Not sure whether this has been reported/fixed before.

Today I built a Blackfin tool-chain from scratch for -tip testing,
and it triggers:

 arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.data_a_l1' referenced in expression

and:

 arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.text_data_l1'
referenced in expression

Now i dont have any way to test this linker script, but it now at
least builds fine after fixing what appears to be typos in those
assert statements.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:30 -04:00
Mike Frysinger 926494943b Blackfin: optimize fixed code handling for the most common case
The majority of the time we are returning to user space, it is not in the
fixed atomic code region.  So rather than branch to a function where we
check the PC and return, do the check inline and branch only when needed.

Also, tweak some of the fixed code handling based on assumptions we are
aware of but cannot be expressed in C.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:28 -04:00
Mike Frysinger 3aa670419a Blackfin: punt dead cache locking code
No one uses these functions, and some are duplicate of existing C code.  So
just punt the whole thing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:25 -04:00
Yi Li c4baebf268 Blackfin: do not trace the exception handler
Since the exception handler cannot cause exceptions, we cannot trace it
without easily causing double faults and crashing the system.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:23 -04:00
Yi Li eb7bd9c461 Blackfin: cleanup sync handling when enabling/disabling cplbs
The handling of updating the [DI]MEM_CONTROL MMRs does not follow proper
sync procedures as laid out in the Blackfin programming manual.  So rather
than audit/fix every call location, create helper functions that do the
right things in order to safely update these MMRs.  Then convert all call
sites to use these new helper functions.

While we're fixing the code, drop the workaround for anomaly 05000125 as
that anomaly applies to old versions of silicon that we do not support.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:19 -04:00
Roel Kluin ac860751eb Blackfin: fix read buffer overflow
Check whether index is within bounds before testing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:13 -04:00
Graf Yang 01b9f4b0ed Blackfin: improve double fault debug handling
Since the hardware only provides reporting for the last exception handled,
and the values are valid only when executing the exception handler, we
need to save the context for reporting at a later point.  While we do this
for one exception, it doesn't work properly when handling a second one as
the original exception is clobbered by the double fault.  So when double
fault debugging is enabled, create a dedicated shadow of these values and
save/restore out of there.  Now the crash report properly displays the
first exception as well as the second one.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:57 -04:00
Graf Yang 36b8412886 Blackfin: fix MPU handling of invalid memory accesses
The protect_page() function was incorrectly setting up the hardware tables
based on possible access capabilities rather than the actual requested
values.  This means we would grant more access to mmap-ed pages than we
should have.  Once we fix this, we need to tweak the signal generated by
such accesses to aline ourselves with other ports.  This allows the LTP
mmap0{5,6,7} cases to run properly.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:55 -04:00
Sonic Zhang 407505dc01 Blackfin: do not try displaying the end of the stack
The end of the stack may not be valid (and that could be OK), so do not
attempt to parse it.  If we do, we might use a bad pointer in kernel space
which makes things panic().

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:50 -04:00
Robin Getz 837ec2d56c Blackfin: catch hardware errors earlier during booting
Allow hardware errors to be caught during early portions of booting, and
leave something in the shadow console that people can use to debug their
system with (to be printed out by the bootloader on next reset).

This enables the hardare error interrupts in head.S, allowing us to find
hardware errors when they happen (well, as much as you can with a hardware
error) and prints out the trace if it is enabled.  This will catch errors
(like booting the wrong image on a 533) which previously resulted in a
infinite loop/hang, as well as random hardware errors before before
setup_arch().

To disable this debug only feature - turn off EARLY_PRINTK.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:44 -04:00
Robin Getz 3f871feaf3 Blackfin: add an early shadow console
Add a memory based shadow console to keep a copy of the printk buffer in a
location which can be found externally.  This allows bootloaders to locate
and utilize the log buffer in case of silent (early/resume/etc...) crashes.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:43 -04:00
Mike Frysinger 53e18df745 Blackfin: add support for common FDPIC ptrace requests
The FDPIC arches support a standard set of ptrace requests so rather than
define our own custom API, hook up those requests for common code to
leverage.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:42 -04:00
Robin Getz 2f812c0bd5 Blackfin: clean up early memory setup code
Remove code duplication, and only print out memory warnings when they are
an actual problem.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:54 -04:00
Mike Frysinger a769094061 Blackfin: fix module reloc handling for all memory regions
The current module relocation code has spotty handling wrt different
memory regions (like L1 instruction).  Rather than try to fix each
little spot, use the new common memory functions to greatly simplify
everything and make sure it is always correct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:52 -04:00
Mike Frysinger 459fec9073 Blackfin: cleanup module section checking
The current module section handling code has a lot of verbose statements
copied and pasted throughout which makes it pretty hard to digest at a
glance.  By unifying all of these up front, it is a lot easier to quickly
get an idea of what is actually going on.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:51 -04:00
Mike Frysinger 70deca9f9c Blackfin: convert malloc()/memset() to zalloc() in module code
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:49 -04:00
Mike Frysinger dc6b1ac984 Blackfin: cleanup printk() usage in module code
Convert all printk() statements to use the common pr_xxx() funcs and use
the new pr_fmt() function to standardize all of the output.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:48 -04:00
Robin Getz 22532578ee Blackfin: reject outdated/unused/wrong relocation types
All kernel modules are required to be built with -mlong-calls and thus
should not generate any of these relocations.  If they do, it means the
module has not been compiled properly, so rather than trying to handle
them (and running into random run time errors) just error out on module
load to force the module to be compiled correctly.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:46 -04:00
Mike Frysinger c014e15a2f Blackfin: convert ptrace to new memory functions
Now that we have a Blackfin memory function to figure out how to properly
access the different regions, drop the custom memory range checks in our
ptrace code and use that.  It makes the code nicer and fixes bugs where
the ptrace logic wasn't handling all the different regions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:45 -04:00
Mike Frysinger 18070dd669 Blackfin: cleanup traps decode_address() a bit
Unify the address display to shrink the code, and add missing decoding of
a few special Blackfin-specific regions (L1 ROM and MMRs).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:43 -04:00
Philippe Gerum f4e129399c Blackfin: inline I-pipe bypass code in ret_from_exception
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:42 -04:00
Philippe Gerum 6b8019c85e Blackfin: allow high priority domains to preempt schedule_tail()
ret_from_fork is always entered with hw interrupts off, which prevents
real-time domains to preempt the Linux kernel during part of the
initial context switch to the new task, which could in turn raise the
worst-case latency figures.

To avoid this, stall the root domain stage in the interrupt pipeline
to keep the scheduling tail code free from Linux-handled IRQs, then
enable hardware interrupts again.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:33 -04:00
Philippe Gerum bc569f1a77 Blackfin: export show_stack() to modules
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:32 -04:00
Philippe Gerum b9c7eb498d Blackfin: fix misnomer of some I-pipe helpers
__ipipe_{stall, unstall}_root_raw() identifiers may leave the reader
under the impression that only the virtual state is affected by these
operations, which is wrong. Pick names following the convention used
throughout the interrupt pipeline code.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:30 -04:00
Philippe Gerum d8ca63955a Blackfin: checkpatch --file arch/blackfin/kernel/ipipe.c
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:29 -04:00
Robin Getz ae4f073c40 Blackfin: make EVT3->EVT5 lowering more robust wrt IPEND[4]
We handle many exceptions at EVT5 (hardware error level) so that we can
catch exceptions in our exception handling code.  Today - if the global
interrupt enable bit (IPEND[4]) is set (interrupts disabled) our trap
handling code goes into a infinite loop, since we need interrupts to be
on to defer things to EVT5.

Normal kernel code should not trigger this for any reason as IPEND[4] gets
cleared early (when doing an interrupt context save) and the kernel stack
there should be sane (or something much worse is happening in the system).
But there have been a few times where this has happened, so this change
makes sure we dump a proper crash message even when things have gone south.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:28:28 -04:00
Tejun Heo 384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Graf Yang 5bc6e3cfe6 Blackfin: add CPLB entries for Core B on-chip L1 SRAM regions
The Blackfin SMP port was missing CPLB entries for Core B on-chip L1 SRAM
regions.  Any code that attempted to use these would wrongly crash due to
a CPLB miss.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:51 -04:00
Robin Getz f574a76a3b Blackfin: work around anomaly 05000189
Similar to anomaly 05000281 but not as bad, we cannot return to the
instruction causing a fault otherwise we'll trigger a second false
exception.  The system can still recover, but it isn't correct.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:48 -04:00
Michael Hennerich c70c754ff9 Blackfin: drop per-cpu loops_per_jiffy tracking
On Blackfin SMP, a per-cpu loops_per_jiffy is pointless since both cores
always run at the same CCLK.  In addition, the current implementation has
flaws since the main consumer for loops_per_jiffy (asm/delay.h) uses the
global kernel loops_per_jiffy and not the per_cpu one.  So punt all of the
per-cpu handling and go back to the global shared one.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:44 -04:00
Michael Hennerich c03c2a8734 Blackfin: fix bugs in GPIO resume code
Change the bfin_gpio_pm_hibernate_restore() function to:
1) AND restored DATA with DIR (not OR) to get correct final state
2) Restore DATA before setting DIR to avoid glitches

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:42 -04:00
Robin Getz 3a920accbb Blackfin: drop duplicate runtime checking of anomaly 05000448
We already catch this anomaly at compile time, and the runtime version is
such that it ends up checking on all parts rather than just the ones that
might actually have it.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:34 -04:00
Mike Frysinger 532f07ca04 Blackfin: fix early_dma_memcpy() handling of busy channels
The early logic to locate a free DMA channel and then set it up was broken
in a few ways that only manifested itself when we needed to set up more
than 2 on chip SRAM regions (most board defaults setup 1 or 2).  First, we
checked the wrong status register (the destination gets updated, not the
source) and second, we did the ssync before rather than after resetting a
DMA config register.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:26 -04:00
Mike Frysinger fb4b5d3a37 Blackfin: handle BF561 Core B memory regions better when SMP=n
Rather than assume Core B is always run with caches turned on, let people
load into any of the on-chip memory regions.  It is their business how the
SRAM/Cache regions are utilized, so don't prevent them from being able to
load into them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:24 -04:00
Robin Getz dc437b1b59 Blackfin: fix silent crash when no uClinux MTD filesystem exists
Since we need to relocate the attached filesystem with the uClinux MTD map
(to handle some anomalies), we need to know its real filesize.  If we boot
a kernel without a filesystem actually attached, we end up blindly reading
and copying garbage (since there is no magic value to detect validity).
Often times this results in an early crash and no output.  So add a few
basic sanity checks before operating on things to catch the majority of
cases.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:21 -04:00
Mike Frysinger 15627bd35c Blackfin: restore exception banner when dumping crash info
Previous unification code put the exception banner behind the "is oops"
logic when it should have been printed all the time.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:20 -04:00
Robin Getz 0e4edcf0b0 Blackfin: work around anomaly 05000281
Add missing anomaly workaround for anomaly 05000281 - we can't return to
instructions which cause hardware errors otherwise we trigger the error
again which means we go into an infinite loop of handling, returning, and
retriggering.  This work around confuses gdb when the error occurs as the
PC will seemed to have moved, so a better long term fix will need to be
figured out, but for now this is better than an infinite crash loop.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:19 -04:00
Mike Frysinger b2dc0a0884 Blackfin: drop dead flash_probe call
There are no CONFIG_{BLK,CHR}_DEV_FLASH Kconfig options, and there is no
flash_probe() function, so not really sure what this code is all about.
Seems to be dead code that stretches way back to the start of the Blackfin
port.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:39:45 -04:00
Alexey Dobriyan 405f55712d headers: smp_lock.h redux
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00
Tejun Heo 023bf6f1b8 linker script: unify usage of discard definition
Discarded sections in different archs share some commonality but have
considerable differences.  This led to linker script for each arch
implementing its own /DISCARD/ definition, which makes maintaining
tedious and adding new entries error-prone.

This patch makes all linker scripts to move discard definitions to the
end of the linker script and use the common DISCARDS macro.  As ld
uses the first matching section definition, archs can include default
discarded sections by including them earlier in the linker script.

ia64 is notable because it first throws away some ia64 specific
subsections and then include the rest of the sections into the final
image, so those sections must be discarded before the inclusion.

defconfig compile tested for x86, x86-64, powerpc, powerpc64, ia64,
alpha, sparc, sparc64 and s390.  Michal Simek tested microblaze.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Cc: linux-arch@vger.kernel.org
Cc: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
2009-07-09 11:27:40 +09:00
Joe Perches ad361c9884 Remove multiple KERN_ prefixes from printk formats
Commit 5fd29d6ccb ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.

<level> is now included in the output on each additional use.

Remove all uses of multiple KERN_<level>s in formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08 10:30:03 -07:00
Tejun Heo c43768cbb7 Merge branch 'master' into for-next
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes.  As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.

Conflicts:
	arch/alpha/include/asm/percpu.h
	arch/mn10300/kernel/vmlinux.lds.S
	include/linux/percpu-defs.h
2009-07-04 07:13:18 +09:00
Tejun Heo 405d967dc7 linker script: throw away .discard section
x86 throws away .discard section but no other archs do.  Also,
.discard is not thrown away while linking modules.  Make every arch
and module linking throw it away.  This will be used to define dummy
variables for percpu declarations and definitions.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: always throw away everything in .discard ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-24 15:13:38 +09:00
Robin Getz bd854c077e Blackfin: fix early crash when booting on wrong cpu
Make sure we process the kernel command line before poking the hardware,
so that we can process early printk.  This helps ensure that if you boot
a kernel configured for a different processor, something will be left in
the log buffer.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:16:17 -04:00
Jie Zhang 41ba653f24 Blackfin: decouple unrelated cache settings to get exact behavior
The current cache options don't really represent the hardware features.
They end up setting different aspects of the hardware so that the end
result is to turn on/off the cache.  Unfortunately, when we hit cache
problems with the hardware, it's difficult to test different settings to
root cause the problem.  The current settings also don't cleanly allow for
different caching behaviors with different regions of memory.

So split the configure options such that they properly reflect the settings
that are applied to the hardware.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:59 -04:00
Philippe Gerum 5ba3b249c9 Blackfin: remove obsolete mcount support from I-pipe code
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:56 -04:00
Philippe Gerum 06ecc190f3 Blackfin: convert interrupt pipeline to irqflags
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:53 -04:00
Sonic Zhang 0de4adfb8c Blackfin: fix accidental reset in some boot modes
We read the SWRST (Software Reset) register to get at the last reset
state, and then we may configure the DOUBLE_FAULT bit to control behavior
when a double fault occurs.  But if the lower bits of the register is
already set (like UART boot mode on a BF54x), we inadvertently make the
system reset by writing to the SYSTEM_RESET field at the same time.  So
make sure the lower 4 bits are always cleared.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:48 -04:00
Mike Frysinger 81b79c213d Blackfin: abstract irq14 lowering in do_irq
Split out the optional IRQ14 lowering code to further simplify the
asm_do_IRQ() function and keep the ifdef nest under control.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:46 -04:00
Mike Frysinger 6f10fdabdc Blackfin: simplify irq stack overflow checking
Take a page from x86 and abstract the stack checking out of the
asm_do_IRQ() function so that the result is easier to digest.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:43 -04:00
Mike Frysinger 46f288a0f9 Blackfin: only build show_interrupts() when procfs is enabled
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:42 -04:00
Mike Frysinger 26579216f3 Blackfin: redo handling of bad irqs
With the common IRQ code initializing much more of the irq_desc state, we
can't blindly initialize it ourselves to the local bad_irq state.  If we
do, we end up wrongly clobbering many fields.  So punt most of the bad irq
code as the common layers will handle the default state, and simply call
handle_bad_irq() directly when the IRQ we are processing is invalid.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:40 -04:00
Mike Frysinger e56e03b0cf Blackfin: unify memory region checks between kgdb and traps
The kgdb (in multiple places) and traps code developed pretty much
identical checks for how to access different regions of the Blackfin
memory map, but each wasn't 100%, so unify them to avoid duplication,
bitrot, and bugs with edge cases.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:34 -04:00
Mike Frysinger d5ce528c8e Blackfin: convert irq/process to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:41:56 -04:00
Mike Frysinger abea0bc3d9 Blackfin: pull in asm/io.h in ksyms for prototypes
Make sure we pull in asm/io.h when exporting symbols for the I/O functions
so we don't end up with a build failure due to missing prototypes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:40:44 -04:00
Linus Torvalds 517d08699b Merge branch 'akpm'
* akpm: (182 commits)
  fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
  fbdev: *bfin*: fix __dev{init,exit} markings
  fbdev: *bfin*: drop unnecessary calls to memset
  fbdev: bfin-t350mcqb-fb: drop unused local variables
  fbdev: blackfin has __raw I/O accessors, so use them in fb.h
  fbdev: s1d13xxxfb: add accelerated bitblt functions
  tcx: use standard fields for framebuffer physical address and length
  fbdev: add support for handoff from firmware to hw framebuffers
  intelfb: fix a bug when changing video timing
  fbdev: use framebuffer_release() for freeing fb_info structures
  radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
  s3c-fb: CPUFREQ frequency scaling support
  s3c-fb: fix resource releasing on error during probing
  carminefb: fix possible access beyond end of carmine_modedb[]
  acornfb: remove fb_mmap function
  mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
  mb862xxfb: restrict compliation of platform driver to PPC
  Samsung SoC Framebuffer driver: add Alpha Channel support
  atmel-lcdc: fix pixclock upper bound detection
  offb: use framebuffer_alloc() to allocate fb_info struct
  ...

Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16 19:50:13 -07:00
Alexey Dobriyan bb1f17b037 mm: consolidate init_mm definition
* create mm/init-mm.c, move init_mm there
* remove INIT_MM, initialize init_mm with C99 initializer
* unexport init_mm on all arches:

  init_mm is already unexported on x86.

  One strange place is some OMAP driver (drivers/video/omap/) which
  won't build modular, but it's already wants get_vm_area() export.
  Somebody should look there.

[akpm@linux-foundation.org: add missing #includes]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:28 -07:00
Mike Frysinger 1ee76d7e16 Blackfin: initial support for ftrace grapher
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:16 -04:00
Mike Frysinger 1c873be744 Blackfin: initial support for ftrace
Just the basic ftrace support here -- mcount and the ftrace stub.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:15 -04:00
Mike Frysinger c7b412f41d Blackfin: add preliminary support for STACKTRACE
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:14 -04:00
Yi Li 6640cfa82b Blackfin: update aedos-ipipe code to upstream 1.10-00
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:11 -04:00
Robin Getz 54ebae7166 Blackfin: do not configure the UART early if on wrong processor
Before we configure the early UART, check to make sure we are running on
the expected processor - otherwise, we cause problems by configuring pins
that don't exist (and causing an infinite loop of faults).

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:10 -04:00
Mike Frysinger 82bd1d7d45 Blackfin: push down exception oops checking
Rather than maintain a duplicate list of valid exceptions we can take in
the kernel both in the first if() check and the switch() check, delay the
oops check to after the switch().  All valid exceptions will have returned
by this point leaving only the invalid ones.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:09 -04:00
Mike Frysinger 6510a20e1b Blackfin: fix trap_c() exit paths
The trap_c() code pushes the hardware trace status onto the stack, but
doesn't always restore it when returning from some trap code paths.  So
unify the exit code paths to all head to the end of the function.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:09 -04:00
Sonic Zhang 47e9dedb72 Blackfin: add blackfin_invalidate_entire_icache for SMP systems
The KGDB code uses this when switching processors to make sure the icache
is in a valid state.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:07 -04:00
Robin Getz 2466ac6556 Blackfin: include the cpu compiled version in /proc/cpuinfo
Since the compiled-for cpu revision can be significant, include it in the
cpuinfo output along side the cpu revision we're currently running on.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:07 -04:00
Mike Frysinger 70f12567ac Blackfin: add support for GENERIC_BUG
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:07 -04:00
Jie Zhang 67834fa93d Blackfin: rename bfin_addr_dcachable to bfin_addr_dcacheable
The latter naming convention is much more common.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:06 -04:00
Robin Getz 16aadcb680 Blackfin: only handle CPLB protection violations when MPU is enabled
We don't need to handle CPLB protection violations unless we are running
with the MPU on.  Fix the entry code to call common trap_c, and remove the
code which is never run.  This allows the traps test suite to run on older
boards with the MPU disabled.

URL: http://blackfin.uclinux.org/gf/tracker/5129
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:06 -04:00
Mike Frysinger bf664c0a3a Blackfin: fix sparseirq/kstat_irqs fallout
The sparseirq changes (d7e51e66) played poorly with the Blackfin irqchip
implementation as we're still using the old hardirq method.  Our bad irq
structure had a NULL kstat_irqs field so when all the common code tries
to increment this field, everything goes big bada boom.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:15:36 -04:00
Mike Frysinger ce0bf52dd3 Blackfin: fix unused warnings after nommu update
The massive nommu update (8feae131) left the local variable "vml" unused,
so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:15:35 -04:00
Robin Getz 81f7f45606 Blackfin: export the last exception cause via debugfs
We have some test code that runs in userspace that exercises the exception
handling of the Blackfin pretty thoroughly.  Part of the validation process
is checking the exact exception triggered, so export the last one seen to
userspace via debugfs when debugging is enabled for the test code to check.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:15:28 -04:00
Roel Kluin 0a99061426 Blackfin: fix length checking in kgdb_ebin2mem
The kgdb_ebin2mem() was decrementing the count variable to do parsing, but
then later still tries to use it based on its original meaning.  So leave
it untouched and use a different variable to walk the memory.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:07 -04:00
Mike Frysinger 11aca0e735 Blackfin: kgdb: fix up error return values
The Blackfin kgdb code was all passing back positive errno values when it
really should have been using negative errno values.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:06 -04:00
Mike Frysinger a43b739f25 Blackfin: push access_ok() L1 attribute down
There is no need for the L1 attribute to be on the prototype of the
access_ok() function as all consumers of the function do not care where it
lives -- they'll always use pcrel calls to get to it.  This prevents
pointless recompiles of most of the system when this config option changes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:05 -04:00
Mike Frysinger 685a694f06 Blackfin: convert early_printk EVT init to a loop
The EVT registers are all contiguous in the memory map, so using a loop to
initialize them all rather than hardcoding the list results in much better
generated code (a hardware loop rather than a whole bunch of individual
loads).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:01 -04:00
Mike Frysinger 595d681f2c Blackfin: rename Blackfin relocs according to the toolchain
The latest Blackfin toolchain has fixed its relocation scheme to match
other ports: always use R_BFIN_ prefix and capitalize everything.  This
brings the kernel in line with those fixes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:59 -04:00
Graf Yang 9b9bfded62 Blackfin: convert SMP to only use generic time framework
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:56 -04:00
Mike Frysinger 79df1b6947 Blackfin: override default uClinux MTD addr/size
Due to a processor anomaly (05000263 to be exact), most Blackfin parts
cannot keep the embedded filesystem image directly after the kernel in
RAM.  Instead, the filesystem needs to be relocated to the end of memory.
As such, we need to tweak the map addr/size during boot for Blackfin
systems.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:53 -04:00
Michael Hennerich c8d5ea8ccb Blackfin: update gptimers API
First we fix the prototypes for functions that return boolean values by
using "int" rather than "uint16_t".  Then we introduce a get_gptimer_run()
function for checking the current run status of a timer, and then we add a
disable_gptimers_sync() function which parallels disable_gptimers() with
corresponding normal "_sync" behavior.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:47 -04:00
Robin Getz 9ba3c24f10 Blackfin: include system/processor info in dump messages
People often copy & paste crash messages without surrounding context, so
include common useful information like system/processor stats in the crash
summary.  This should smooth over the report/test cycle a bit more.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:47 -04:00
Robin Getz 0acad8dfee Blackfin: add workaround for anomaly 05000461
Returning too fast with a bad RETI can trigger false errors.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:46 -04:00
Robin Getz a0cab65642 Blackfin: make sure stack is accessible before dumping it
When displaying a crash dump, make sure accessing the stack is safe so
we don't crash at the same time.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:45 -04:00
Robin Getz a17c7f6f5b Blackfin: make sure MPU CPLB for first 1k is marked as valid
This way we properly catch and kill applications that jump to a NULL ptr.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:40 -04:00
Graf Yang 8af7ffa0d5 Blackfin: add workaround for anomaly 05000287
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:39 -04:00
Graf Yang 1fa9be72b5 Blackfin: add support for gptimer0 as a tick source
For systems where the core cycles are not a usable tick source (like SMP
or cycles gets updated), enable gptimer0 as an alternative.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:37 -04:00
Sonic Zhang 7f3aee3c18 Blackfin: detect anomaly 05000274
Detect and reject operating conditions for anomaly 05000274 since the
problem cannot be worked around in software.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:35 -04:00
Mike Frysinger d8804adf52 Blackfin: do not append newlines to panic() messages
The panic() function already handles newlines for us.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:34 -04:00
Mike Frysinger a9031028ef Blackfin: delete unused sys_getpagesize() function
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:31 -04:00
Graf Yang e522c8466d Blackfin: work around anomaly 05000287
Make sure we work around anomaly 05000287 by configuring different port
preferences for the data cache.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:31 -04:00
Mike Frysinger a9a59e3096 Blackfin: punt useless GPIO init call
This init code existed only to dump a printk(), and not even a useful one.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:30 -04:00
Robin Getz 76068c3c5d Blackfin: annotate anomaly 05000119 in core DMA code
Add a reminder note to avoid the DMA_DONE bit in our DMA core code.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:29 -04:00
Robin Getz fecbd7366b Blackfin: fix early L1 relocation crash
Our early L1 relocate code may implicitly call code which lives in L1
memory.  This is due to the dma_memcpy() rewrite that made the DMA code
lockless and safe to be used by multiple processes.  If we start the
early DMA memcpy to relocate things into L1 instruction but then our
DMA memcpy code calls a function that lives in L1, things fall apart.
As such, create a small dedicated DMA memcpy routine that we can assume
sanity at boot time.

Reported-by: Filip Van Rillaer <filip.vanrillaer@oneaccess-net.com>
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:27 -04:00
Michael Hennerich d4b890b0cd Blackfin: do not error if GPIO IRQ is requested already as GPIO
Some drivers expect to be able to request both as GPIO and GPIO IRQ, so
allow that use case.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:03:48 -04:00
Philippe Gerum 51387009bd Blackfin: merge Philippe's recent ipipe patch
ipipe-2.6.28.9-blackfin-git95aafe6.patch

Singed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:03:46 -04:00
Mike Frysinger 5d89137a17 Blackfin: fix data cache flushing when doing icache flushing
Make sure we flush all data caches and their write buffers before flushing
icache, otherwise random edge cases could crop up where stale data is read
into icache from external memory.  As fallout, punt the combined icache +
dcache flush function since we cannot safely do them back to back -- the
SSYNC is needed between the dcache flush and the icache flush.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12 06:03:45 -04:00
Robin Getz b8d0c778e6 Blackfin: allow scheduler functions to be placed into L1
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12 06:03:44 -04:00
Mike Frysinger 6b50520b2f Blackfin: ignore generated vmlinux.lds
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-27 00:27:03 -04:00
Magnus Damm 8e19608e8b clocksource: pass clocksource to read() callback
Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:47 -07:00
Linus Torvalds 22ae77bc7a Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (53 commits)
  [MTD] struct device - replace bus_id with dev_name(), dev_set_name()
  [MTD] [NOR] Fixup for Numonyx M29W128 chips
  [MTD] mtdpart: Make ecc_stats more realistic.
  powerpc/85xx: TQM8548: Update DTS file for multi-chip support
  powerpc: NAND: FSL UPM: document new bindings
  [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays
  [MTD] [NAND] FSL-UPM: add multi chip support
  [MTD] [NOR] Add device parent info to physmap_of
  [MTD] [NAND] Add support for NAND on the Socrates board
  [MTD] [NAND] Add support for 4KiB pages.
  [MTD] sysfs support should not depend on CONFIG_PROC_FS
  [MTD] [NAND] Add parent info for CAFÉ controller
  [MTD] support driver model updates
  [MTD] driver model updates (part 2)
  [MTD] driver model updates
  [MTD] [NAND] move gen_nand's probe function to .devinit.text
  [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text
  [MTD] fix use after free in register_mtd_blktrans
  [MTD] [MAPS] Drop now unused sharpsl-flash map
  [MTD] ofpart: Check name property to determine partition nodes.
  ...

Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-04-06 14:56:26 -07:00
Alexey Dobriyan 6f2c55b843 Simplify copy_thread()
First argument unused since 2.3.11.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:51 -07:00
Linus Torvalds 0151f94f2e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: be less noisy when gets a gpio conflict after kernel has booted
  Blackfin arch: add RSI's definitions to bf514 and bf516
  Blackfin arch: add link-time asserts to make sure on-chip regions dont overflow
  Blackfin arch: sport spi needs 6 gpio pins
  Blackfin arch: add sport-spi related resource stuff to board file
  Blackfin arch: Blacklist Hibernate (PM_SUSPEND_MEM) on BF561 as well
  Blackfin arch: Privide BF537-STAMP platform data of ADP5520 Multifunction driver
  Blackfin arch: enable the platfrom PATA driver with CF Cards
  Blackfin arch: clean up sports header file
  Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x
  Blackfin arch: bf51x processors also have 8 timers
  Blackfin arch: add a check to make sure only Blackfin GPIOs may generate IRQs
  Blackfin arch: update default kernel configuration
  Blackfin arch: include linux headers that this one uses definitions from fro sport drivers
2009-03-28 13:55:49 -07:00
Robin Getz d6879c585b Blackfin arch: be less noisy when gets a gpio conflict after kernel has booted
Once the kernel has booted - be less noisy when someone does a modprobe
(and gets a gpio conflict).

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-29 01:10:30 +08:00
Mike Frysinger 4636b3019a Blackfin arch: add link-time asserts to make sure on-chip regions dont overflow
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-29 00:47:31 +08:00
Mike Frysinger 269647dc8f Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x
convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x as the defines
are redundant in these cases

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-28 20:32:57 +08:00
Ingo Molnar 6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Bernd Schmidt 158772c2d4 [MTD] Fix a bad dependency in the Blackfin code
Fix a bad dependency in the Blackfin code on a RomFS config symbol that doesn't
exist upstream.

Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-24 09:02:59 +00:00
Ingo Molnar edb35028e4 Merge branches 'irq/genirq' and 'linus' into irq/core 2009-03-16 09:20:13 +01:00
Jie Zhang 7786ce823b Blackfin arch: fix bug - gdb signull case make trunk kernel panic frequently
Use copy_to_user_page and copy_from_user_page instead of
memcpy. copy_to_user_page does cache flush when necessary.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05 18:50:26 +08:00
Mike Frysinger 27276ba21f Blackfin arch: remove spurious dash when dcache is off
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05 18:47:20 +08:00
Robin Getz 0004952242 Blackfin arch: Random read/write errors are a bad thing
Random read/write errors are a bad thing - so don't let anyone
(including the test bench) run on something we know is bad.

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05 18:18:49 +08:00
Sonic Zhang 0bf3d93308 Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch
Free spinlock before call IPI handlers.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>


Header from folded patch 'blackfin_arch__fix_bug_-_kgdb_fails_to_continue_after_setting_breakpoint_on_bf561-ezkit_kernel_with_smp_patch-1':

Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch

Don't test l1 code in SMP kernel.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05 16:44:53 +08:00
Philippe Gerum 9bd50df6aa Blackfin arch: Update adeos blackfin arch patch to 1.9-00
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-04 16:52:38 +08:00
Bernd Schmidt e84dcaa18b Blackfin arch: fix bug - jump_to_zero test case failed on noMPU kernel
The nompu code is now derived from the mpu code, and had the same problem -
no null pointer detection on ICPLBs.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-02 18:37:48 +08:00
Mike Frysinger 34d464f8aa Blackfin arch: use common KGDB_TESTS rather than our own KGDB_TESTCASE
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-02 18:14:47 +08:00
Ingo Molnar 8f8573ae9f Merge branches 'irq/genirq', 'irq/sparseirq' and 'irq/urgent' into irq/core 2009-02-13 11:57:18 +01:00
Ingo Molnar 249d51b53a Merge commit 'v2.6.29-rc4' into core/percpu
Conflicts:
	arch/x86/mach-voyager/voyager_smp.c
	arch/x86/mm/fault.c
2009-02-09 14:58:11 +01:00
Michael Hennerich 972de7d929 Blackfin arch: Update Copyright information
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger af4c7d4b4e Blackfin arch: define bfin_memmap as static since it is only used here
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger d04dfc4c0e Blackfin arch: cplb mananger: use a do...while loop rather than a for loop
use a do...while loop rather than a for loop to get slightly better
optimization and to avoid gcc "may be used uninitialized" warnings ...
we know that the [id]cplb_nr_bounds variables will never be 0, so this
is OK

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Bernd Schmidt bf324cb81a Blackfin arch: fix bug - traps test case 19 for exception 0x2d fails
Enable null pointer checking for ICPLBs. The code was there but for
some reason I had commented it out at some stage during development.

Should restrict this to 1K since atomic ops start there.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger ed1fb6048c Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger a6595bf04b Blackfin arch: bfin_reset->_bfin_reset redirection no longer needed
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Mike Frysinger adab7eb883 Blackfin arch: sync reboot handler with version in u-boot
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Graf Yang 0ce5eaf8ec Blackfin arch: Fix bug - BF518 port F, G, and H have different mux offset compare to BF527
[Mike Frysinger <vapier.adi@gmail.com>: keep the ifdef nest down]

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Grace Pan 047481f348 Blackfin arch: Add in cflag to support mlong-calls for kgdb_test
Signed-off-by: Grace Pan <grace.pan@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Sonic Zhang b52dae3139 Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrd
[Mike Frysinger <vapier.adi@gmail.com>:
 - setup P_DEFAULT_BOOT_SPI_CS  for every arch based on
   the default bootrom behavior and convert all our boards
   to it
 - revert previous anomaly change ... bf51x is not affected
   by anomaly 05000353]

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Robin Getz 3605fb0965 Blackfin arch: Add ability to count and display number of NMI interrupts
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00