With the current code, we want to read 4 entries from DT array
"semtech,combined-sensors". If there are less, we silently fail as
of_property_read_u32_array() returns -EOVERFLOW.
First count the number of entries and if between 1 and 4, collect the
content of the array.
Fixes: 5b19ca2c78 ("iio: sx9310: Set various settings from DT")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210326184603.251683-2-gwendal@chromium.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Because a dependency on HAS_IOMEM and OF was added for the ADI AXI ADC
driver, this makes the AD9467 driver have some build/dependency issues
when OF is disabled (typically on ACPI archs like x86).
This is because the selection of the AD9467 enforces the ADI_AXI_ADC symbol
which is blocked by the OF (and potentially HAS_IOMEM) being disabled.
To fix this, we make the AD9467 driver depend on the ADI_AXI_ADC symbol.
The AD9467 driver cannot operate on it's own. It requires the ADI AXI ADC
driver to stream data (or some similar IIO interface).
So, the fix here is to make the AD9467 symbol depend on the ADI_AXI_ADC
symbol. At some point this could become it's own subgroup of high-speed
ADCs.
Fixes: be24c65e9f ("iio: adc: adi-axi-adc: add proper Kconfig dependencies")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210324182746.9337-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To get access to the big endian byte order parsing helpers
drivers need to include <asm/unaligned.h> and nothing else.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210215153032.47962-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There was a missed return variable assignment in the
default errorpath of the switch statement in yas5xx_probe().
Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210215153023.47899-1-linus.walleij@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This doesn't appear to generate a warning on all versions of GCC, but
0-day reported it and the report looks valid.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add suffix ULL to constant 1000 in order to avoid a potential integer
overflow and give the compiler complete information about the proper
arithmetic to use. Notice that this constant is being used in a context
that expects an expression of type unsigned long long, but it's
currently evaluated using 32-bit arithmetic.
Addresses-Coverity-ID: 1503062 ("Unintentional integer overflow")
Fixes: dafcf4ed83 ("iio: hrtimer: Allow sub Hz granularity")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210329205817.GA188755@embeddedor
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver was in an odd half way state between devm based cleanup
and manual cleanup (most of which was missing).
I would guess something went wrong with a rebase or similar.
Anyhow, this basically finishes the job as a precursor to improving
the regulator handling.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 4bb2b8f94a ("iio: adc: ad7476: implement devm_add_action_or_reset")
Cc: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210401171759.318140-2-jic23@kernel.org
These devices are not able to mask the signal used as a data ready
interrupt. As such they previously requested the irq then immediately
disabled it. Now we can avoid the potential of a spurious interrupt
by avoiding the irq being auto enabled in the first place.
I'm not sure how this code could have been called with the irq already
disabled, so I believe the conditional would always have been true and
have removed it.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210402184544.488862-8-jic23@kernel.org
This is a bit involved as the adis library code already has some
sanity checking of the flags of the requested irq that we need
to ensure is happy to pass through the IRQF_NO_AUTOEN flag untouched.
Using this flag avoids us autoenabling the irq in the adis16460 and
adis16475 drivers which cover parts that don't have any means of
masking the interrupt on the device end.
Note, compile tested only!
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210402184544.488862-7-jic23@kernel.org
This new flag cleanly avoids the need for a dance where we request the
interrupt only to immediately disabling it by ensuring it is not
auto-enabled in the first place.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210402184544.488862-6-jic23@kernel.org
This new flag ensures a requested irq is not autoenabled, thus removing
the need for the disable_irq() that follows and closing off any chance
of spurious interrupts.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210402184544.488862-5-jic23@kernel.org
Whilst a race during interrupt enabling is probably not a problem,
it is better to not enable the interrupt at all. The new
IRQF_NO_AUTOEN flag allows us to do that.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210402184544.488862-4-jic23@kernel.org
Disabling an irq before the driver has actually atempted to request it
may work, but is definitely not as clean as just requesting it as
normal but with the auto enable disabled.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210402184544.488862-3-jic23@kernel.org
As iio_poll_trigger() is safe against spurious interrupts when the
trigger is not enabled, this is not a fix despite looking like
a race. It is nice to simplify the code however so the interrupt
is never enabled in the first place.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210402184544.488862-2-jic23@kernel.org
When dynamically allocating sysfs attributes, it's a good idea to call
sysfs_attr_init() on them to initialize lock_class_keys.
This change does that.
The lock_class_keys are set when the CONFIG_DEBUG_LOCK_ALLOC symbol is
enabled. Which is [likely] one reason why I did not see this during
development.
I also am not able to see this even with CONFIG_DEBUG_LOCK_ALLOC enabled,
so this may [likely] be reproduce-able on some system configurations.
This was reported via:
https://lore.kernel.org/linux-iio/CA+U=DsrsvGgXEF30-vXuXS_k=-mjSjiBwEEzwKb1hJVn1P98OA@mail.gmail.com/T/#u
Fixes: 15097c7a1a ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210402174226.630346-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In some cases indentation looks a bit weird with starting from = sign
and being in a ladder-type style. Unify it across the module.
While at it, add blank line after definition block where it needed,
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210402174911.44408-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
By unknown reason device name is set with an index casted from int
to unsigned long while at the same time with "%ld" specifier. Both parts
seems wrong to me, thus replace replace explicit casting and wrong specifier
with proper one, i.e. "%d".
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210402174911.44408-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dropped __func__ while using dev_dbg() and pr_debug()
If the function name is desired, it can be configured using
dynamic debug.
Signed-off-by: Mugilraj Dhavachelvan <dmugil2000@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210401154343.41527-1-dmugil2000@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The timestamp control has been a function implemented in the core of
IIO for a long time, so this comment is incorrect and has clearly been
cut and paste into all these drivers.
The remainder of the comment added nothing and was confusing so dropped
that as well.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210401145410.226917-1-jic23@kernel.org
This capacitance to digital converter (CDC) driver is compliant with
the IIO ABI. Note, not all features supported (e.g. window event modes)
but the driver should be in a useful functional state.
The cleanup was done against QEMU emulation of the device rather than
actual hardware. Whilst this was a bit of an experiment, it made it
easy to confirm that the driver remained in a consistent working state
through the various refactors. If it worked in the first place, it
should still be working after this cleanup.
Given some IIO drivers require expensive hardware setups, (not particularly
true with this one) the use of QEMU may provide a viable way forward
for providing testing during code changes where previously we'd had
to rely on sharp eyes and crossed fingers.
Note, no explicit MAINTAINERS entry as it will be covered by the
generic catch-alls for ADI and IIO drivers which are sufficient.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-25-jic23@kernel.org
Binding covering the ad7150, ad7151 and ad7156 capacitance to digital
convertors. The only difference between these is how many channels they
have (1 or 2)
Whilst it is clearly necessary to provide power to the part, we don't
need to know the voltage or anything so if it is always on, there should
be no need to have it specified in the binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210314181511.531414-24-jic23@kernel.org
It seems to me that the changes made to get this ready to move out of
staging are substantial enough to warant a copyright notice addition.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-23-jic23@kernel.org
Main additions are around thresh_adaptive. This has been supported
by the core of IIO for a long time, but no driver that uses it has
previously graduated from staging, hence we are missing Docs.
Otherwise, just new entries in existing lists.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210314181511.531414-22-jic23@kernel.org
Rather than using the fallback path in the i2c subsystem and hoping
for no clashes across vendors, lets put in an explicit table for
matching.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon>
Link: https://lore.kernel.org/r/20210314181511.531414-21-jic23@kernel.org
Given DT docs will include regulators, lets just turn them on and
off with driver probe() and remove().
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-20-jic23@kernel.org
The datasheet provides these two values on the assumption they are applied
to unshift raw value. Hence shift both the offset and scale by 4
to compensate.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-19-jic23@kernel.org
Every other register related to raw value on the datasheet is
described as correpsonding to the 12MSB of the actual
data registers + the bottom 4 bits are 0. So lets treat this
as what it actually is, which is a 12 bit value.
Note that we will have to be a little careful to compensate for
the offset and scale values.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-18-jic23@kernel.org
These have a habit of not getting updated with driver reorganizations
and don't add much info so drop them.
Also fix a minor comment syntax issue.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-17-jic23@kernel.org
Where there is no other basis on which to order declarations
let us prefer reverse xmas tree. Also reduce scope where
sensible.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-16-jic23@kernel.org
Whilst not important, it's nice to have the general headers in
alphabetical order.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-15-jic23@kernel.org
Add _REG postfix to register addresses to avoid confusion with
fields. Also add additional field defines and use throughout the
driver in place of magic numbers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-14-jic23@kernel.org
Note this doesn't support everything the chip can do as we ignore
window mode for now (in window / out of window).
* Given the chip doesn't have any way of disabling the threshold
pins, use disable_irq() etc to mask them except when we actually
want them enabled (previously events were always enabled).
Note there are race conditions, but using the current state from
the status register and disabling interrupts across changes in
type of event should mean those races result in interrupts,
but no events to userspace.
* Correctly reflect that there is one threshold line per channel.
* Only take notice of rising edge. If anyone wants the other edge
then they should set the other threshold (they are available for
rising and falling directions). This isn't perfect but it makes
it a lot simpler.
* If insufficient interrupts are specified in firnware, don't support
events.
* Adaptive events use the same pos/neg values of thrMD as non adaptive
ones.
Tested against qemu based emulation.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210314181511.531414-13-jic23@kernel.org
Now we have core support for timeouts related to adaptive events, let us
use it. Note the units of that attribute are seconds, so we also need
to scale the cycles value by the period of each sample.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-12-jic23@kernel.org
For adaptive threshold events, the current value is compared with a
(typically) low pass filtered version of the same signal that slowly
tracks large scale changes. However, sometimes a step change can
result in a large lag before the low pass filtered version begins
to track the signal again. Timeouts can be used to made an
instantaneous 'correction'. Documentation of this attribute
is added in a later patch.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-11-jic23@kernel.org
Gwendal Grignou