The specified format of the INDICATION_REGISTER QMI request message
has been extended to support two more optional fields:
endpoint_desc_ind:
sender wishes to receive endpoint descriptor information via
an IPA ENDP_DESC indication QMI message
bw_change_ind:
sender wishes to receive bandwidth change information via
an IPA BW_CHANGE indication QMI message
Add definitions that permit these fields to be formatted and parsed
by the QMI library code.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ipa_init_modem_driver_req_ei[] encoding array for the
INIT_MODEM_DRIVER request message has some errors in it.
First, the tlv_type associated with the hw_stats_quota_size field is
wrong; it duplicates the valiue used for the hw_stats_quota_base_addr
field (0x1f) and should use 0x20 instead. The tlv_type value for
the hw_stats_drop_size field also uses the same duplicate value; it
should use 0x22 instead.
Second, there is no definition for the hw_stats_drop_base_addr
field. It is an optional 32-bit enumerated type value.
Finally, the hw_stats_quota_base_addr, hw_stats_quota_size, and
hw_stats_drop_size fields are defined as enumerated types; they
should be unsigned 4-byte values.
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the ipa_indication_register_req_ei[] encoding array, the tlv_type
associated with the ipa_mhi_ready_ind field is wrong. It duplicates
the value used for the data_usage_quota_reached field (0x11) and
should use value 0x12 instead. Fix this bug.
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Building with "W=1" did exactly what it was supposed to do, namely
point out some suspicious-looking code to be verified not to contain
bugs.
Some QMI message structures defined in "ipa_qmi_msg.c" contained
some bad field names (duplicating the "elem_size" field instead of
defining the "offset" field), almost certainly due to copy/paste
errors that weren't obvious in a scan of the code. Fix these bugs.
Fixes: 530f9216a9 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements two forms of out-of-band communication between
the AP and modem.
- QMI is a mechanism that allows clients running on the AP
interact with services running on the modem (and vice-versa).
The AP IPA driver uses QMI to communicate with the corresponding
IPA driver resident on the modem, to agree on parameters used
with the IPA hardware and to ensure both sides are ready before
entering operational mode.
- SMP2P is a more primitive mechanism available for the modem and
AP to communicate with each other. It provides a means for either
the AP or modem to interrupt the other, and furthermore, to provide
32 bits worth of information. The IPA driver uses SMP2P to tell
the modem what the state of the IPA clock was in the event of a
crash. This allows the modem to safely access the IPA hardware
(or avoid doing so) when a crash occurs, for example, to access
information within the IPA hardware.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder