Eric Dumazet, thank you for disclosing this bug.
Readahead logic somehow fails to populate the page range with data.
It can be because
1) the readahead routine is not always called in the following lines of
fs/splice.c:
if (!loff || nr_pages > 1)
page_cache_readahead(mapping, &in->f_ra, in, index, nr_pages);
2) even called, page_cache_readahead() wont guarantee the pages are there.
It wont submit readahead I/O for pages already in the radix tree, or when
(ra_pages == 0), or after 256 cache hits.
In your case, it should be because of the retried reads, which lead to
excessive cache hits, and disables readahead at some time.
And that _one_ failure of readahead blocks the whole read process.
The application receives EAGAIN and retries the read, but
__generic_file_splice_read() refuse to make progress:
- in the previous invocation, it has allocated a blank page and inserted it
into the radix tree, but never has the chance to start I/O for it: the test
of SPLICE_F_NONBLOCK goes before that.
- in the retried invocation, the readahead code will neither get out of the
cache hit mode, nor will it submit I/O for an already existing page.
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Currently if partial write has happened while ->commit_write() then page
wasn't marked as accessed and rebalanced.
Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Ocfs2 wants to implement it's own splice write actor so that it can better
manage cluster / page locks. This lets us re-use the rest of splice write
while only providing our own code where it's actually important.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Splice does not need to readpage to bring the page uptodate before writing
to it, because prepare_write will take care of that for us.
Splice is also wrong to SetPageUptodate before the page is actually uptodate.
This results in the old uninitialised memory leak. This gets fixed as a
matter of course when removing the readpage logic.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Stealing pages with splice is problematic because we cannot just insert
an uptodate page into the pagecache and hope the filesystem can take care
of it later.
We also cannot just ClearPageUptodate, then hope prepare_write does not
write anything into the page, because I don't think prepare_write gives
that guarantee.
Remove support for SPLICE_F_MOVE for now. If we really want to bring it
back, we might be able to do so with a the new filesystem buffered write
aops APIs I'm working on. If we really don't want to bring it back, then
we should decide that sooner rather than later, and remove the flag and
all the stealing infrastructure before anybody starts using it.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
- pipe/splice should use const pipe_buf_operations and file_operations
- struct pipe_inode_info has an unused field "start" : get rid of it.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch changes struct file to use struct path instead of having
independent pointers to struct dentry and struct vfsmount, and converts all
users of f_{dentry,vfsmnt} in fs/ to use f_path.{dentry,mnt}.
Additionally, it adds two #define's to make the transition easier for users of
the f_dentry and f_vfsmnt.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
After the inode slimming patch that unionised i_pipe/i_bdev/i_cdev, it's
no longer enough to check for existance of ->i_pipe to verify that this
is a pipe.
Original patch from Eric Dumazet <dada1@cosmosbay.com>
Final solution suggested by Linus.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Consolidate page_cache_alloc
- Fix splice: only the pagecache pages and filesystem data need to use
mapping_gfp_mask.
- Fix grab_cache_page_nowait: same as splice, also honour NUMA placement.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Originally from Mark Fasheh <mark.fasheh@oracle.com>
generic_file_splice_write() does not remove S_ISUID or S_ISGID. This is
inconsistent with the way we generally write to files.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This allows file systems to manage their own i_mutex locking while
still re-using the generic_file_splice_write() logic.
OCFS2 in particular wants this so that it can order cluster locks within
i_mutex.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The splice_actor may be calling ->prepare_write() and ->commit_write(). We
want i_mutex on the inode being written to before calling those so that we
don't race i_size changes.
The double locking behavior is done elsewhere in splice.c, and if we
eventually want _nolock variants of generic_file_splice_write(), fs modules
might have to replicate the nasty locking code. We introduce
inode_double_lock() and inode_double_unlock() to consolidate the locking
rules into one set of functions.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Several issues noticed/fixed:
- We cannot reliably block in link_pipe() while holding both input and output
mutexes. So do preparatory checks before locking down both mutexes and doing
the link.
- The ipipe->nrbufs vs i check was bad, because we could have dropped the
ipipe lock in-between. This causes us to potentially look at unknown
buffers if we were racing with someone else reading this pipe.
Signed-off-by: Jens Axboe <axboe@suse.de>
Otherwise we could be racing with truncate/mapping removal.
Problem found/fixed by Nick Piggin <npiggin@suse.de>, logic rewritten
by me.
Signed-off-by: Jens Axboe <axboe@suse.de>
This can happen quite easily, if several processes are trying to splice
the same file at the same time. It's not a failure, it just means someone
raced with us in allocating this file page. So just dump the allocated
page and relookup the original.
Signed-off-by: Jens Axboe <axboe@suse.de>
Nick says that the current construct isn't safe. This goes back to the
original, but sets PIPE_BUF_FLAG_LRU on user pages as well as they all
seem to be on the LRU in the first place.
Signed-off-by: Jens Axboe <axboe@suse.de>
Looking at generic_file_buffered_write(), we need to unlock_page() if
prepare write fails and it isn't due to racing with truncate().
Also trim the size if ->prepare_write() fails, if we have to.
Signed-off-by: Jens Axboe <axboe@suse.de>
Currently we rely on the PIPE_BUF_FLAG_LRU flag being set correctly
to know whether we need to fiddle with page LRU state after stealing it,
however for some origins we just don't know if the page is on the LRU
list or not.
So remove PIPE_BUF_FLAG_LRU and do this check/add manually in pipe_to_file()
instead.
Signed-off-by: Jens Axboe <axboe@suse.de>
We need to use the minium of {len, PAGE_SIZE-off}, not {len, PAGE_SIZE}-off.
The latter doesn't make any sense, and could cause us to attempt negative
length transfers...
Signed-off-by: Jens Axboe <axboe@suse.de>
If SPLICE_F_GIFT is set, the user is basically giving this pages away to
the kernel. That means we can steal them for eg page cache uses instead
of copying it.
The data must be properly page aligned and also a multiple of the page size
in length.
Signed-off-by: Jens Axboe <axboe@suse.de>
The pipe ->map() method uses kmap() to virtually map the pages, which
is both slow and has known scalability issues on SMP. This patch enables
atomic copying of pipe pages, by pre-faulting data and using kmap_atomic()
instead.
lmbench bw_pipe and lat_pipe measurements agree this is a Good Thing. Here
are results from that on a UP machine with highmem (1.5GiB of RAM), running
first a UP kernel, SMP kernel, and SMP kernel patched.
Vanilla-UP:
Pipe bandwidth: 1622.28 MB/sec
Pipe bandwidth: 1610.59 MB/sec
Pipe bandwidth: 1608.30 MB/sec
Pipe latency: 7.3275 microseconds
Pipe latency: 7.2995 microseconds
Pipe latency: 7.3097 microseconds
Vanilla-SMP:
Pipe bandwidth: 1382.19 MB/sec
Pipe bandwidth: 1317.27 MB/sec
Pipe bandwidth: 1355.61 MB/sec
Pipe latency: 9.6402 microseconds
Pipe latency: 9.6696 microseconds
Pipe latency: 9.6153 microseconds
Patched-SMP:
Pipe bandwidth: 1578.70 MB/sec
Pipe bandwidth: 1579.95 MB/sec
Pipe bandwidth: 1578.63 MB/sec
Pipe latency: 9.1654 microseconds
Pipe latency: 9.2266 microseconds
Pipe latency: 9.1527 microseconds
Signed-off-by: Jens Axboe <axboe@suse.de>
The ->map() function is really expensive on highmem machines right now,
since it has to use the slower kmap() instead of kmap_atomic(). Splice
rarely needs to access the virtual address of a page, so it's a waste
of time doing it.
Introduce ->pin() to take over the responsibility of making sure the
page data is valid. ->map() is then reduced to just kmap(). That way we
can also share a most of the pipe buffer ops between pipe.c and splice.c
Signed-off-by: Jens Axboe <axboe@suse.de>
Found by Oleg Nesterov <oleg@tv-sign.ru>, fixed by me.
- Only allow full pages to go to the page cache.
- Check page != buf->page instead of using PIPE_BUF_FLAG_STOLEN.
- Remember to clear 'stolen' if add_to_page_cache() fails.
And as a cleanup on that:
- Make the bottom fall-through logic a little less convoluted. Also make
the steal path hold an extra reference to the page, so we don't have
to differentiate between stolen and non-stolen at the end.
Signed-off-by: Jens Axboe <axboe@suse.de>
- Check that page has suitable count for stealing in the regular pipes.
- pipe_to_file() assumes that the page is locked on succesful steal, so
do that in the pipe steal hook
- Missing unlock_page() in add_to_page_cache() failure.
Signed-off-by: Jens Axboe <axboe@suse.de>
Use the new find_get_pages_contig() to potentially look up the entire
splice range in one single call. This speeds up generic_file_splice_read()
quite a bit.
Signed-off-by: Jens Axboe <axboe@suse.de>
sys_splice() moves data to/from pipes with a file input/output. sys_vmsplice()
moves data to a pipe, with the input being a user address range instead.
This uses an approach suggested by Linus, where we can hold partial ranges
inside the pages[] map. Hopefully this will be useful for network
receive support as well.
Signed-off-by: Jens Axboe <axboe@suse.de>
Make the move_from_pipe() actors return number of bytes processed, then
move_from_pipe() can decide more cleverly when to move on to the next
buffer.
This fixes problems with pipe offset and differing file offset.
Signed-off-by: Jens Axboe <axboe@suse.de>
Since ->map() no longer locks the page, we need to adjust the handling
of those pages (and stealing) a little. This now passes full regressions
again.
Signed-off-by: Jens Axboe <axboe@suse.de>
- We need to adjust *ppos for writes as well.
- Copy back modified offset value if one was passed in, similar to
what sendfile does.
Signed-off-by: Jens Axboe <axboe@suse.de>
We need to ensure that we only drop a lock that is ordered last, to avoid
ABBA deadlocks with competing processes.
Signed-off-by: Jens Axboe <axboe@suse.de>
- generic_file_splice_read() more readable and correct
- Don't bail on page allocation with NONBLOCK set, just don't allow
direct blocking on IO (eg lock_page).
Signed-off-by: Jens Axboe <axboe@suse.de>
Basically an in-kernel implementation of tee, which uses splice and the
pipe buffers as an intelligent way to pass data around by reference.
Where the user space tee consumes the input and produces a stdout and
file output, this syscall merely duplicates the data inside a pipe to
another pipe. No data is copied, the output just grabs a reference to the
input pipe data.
Signed-off-by: Jens Axboe <axboe@suse.de>
We need not use ->f_pos as the offset for the file input/output. If the
user passed an offset pointer in through sys_splice(), just use that and
leave ->f_pos alone.
Signed-off-by: Jens Axboe <axboe@suse.de>
- capitalize consistently
- end sentences in one way or another
- update comment text to match the implementation
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <axboe@suse.de>
Also corrects a few comments. Patch mainly from Ingo, changes by me.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <axboe@suse.de>
- Kill the local variables that cache ->nrbufs, they just take up space.
- Only set do_wakeup for a real pipe. This is a big win for direct splicing.
- Kill i_mutex lock around ->f_pos update, regular io paths don't do this
either.
Signed-off-by: Jens Axboe <axboe@suse.de>
Using find_get_page() is a lot faster than find_or_create_page(). This
gets splice a lot closer to sendfile() for fd -> socket transfers.
Signed-off-by: Jens Axboe <axboe@suse.de>
It's more efficient for sendfile() emulation. Basically we cache an
internal private pipe and just use that as the intermediate area for
pages. Direct splicing is not available from sys_splice(), it is only
meant to be used for sendfile() emulation.
Additional patch from Ingo Molnar to avoid the PIPE_BUFFERS loop at
exit for the normal fast path.
Signed-off-by: Jens Axboe <axboe@suse.de>
add optional input and output offsets to sys_splice(), for seekable file
descriptors:
asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
int fd_out, loff_t __user *off_out,
size_t len, unsigned int flags);
semantics are straightforward: f_pos will be updated with the offset
provided by user-space, before the splice transfer is about to begin.
Providing a NULL offset pointer means the existing f_pos will be used
(and updated in situ). Providing an offset for a pipe results in
-ESPIPE. Providing an invalid offset pointer results in -EFAULT.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <axboe@suse.de>
separate out the 'internal pipe object' abstraction, and make it
usable to splice. This cleans up and fixes several aspects of the
internal splice APIs and the pipe code:
- pipes: the allocation and freeing of pipe_inode_info is now more symmetric
and more streamlined with existing kernel practices.
- splice: small micro-optimization: less pointer dereferencing in splice
methods
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Update XFS for the ->splice_read/->splice_write changes.
Signed-off-by: Jens Axboe <axboe@suse.de>
We don't want to call into the read-ahead logic unless we are at the
start of a page, _or_ we have multiple pages to read.
Signed-off-by: Jens Axboe <axboe@suse.de>
We can get to out: with a NULL page, which we probably
don't want to be calling page_cache_release() on.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
Originally from Nick Piggin, just adapted to the newer branch.
You can't check PageLRU without holding zone->lru_lock. The page
release code can get away with it only because the page refcount is 0 at
that point. Also, you can't reliably remove pages from the LRU unless
the refcount is 0. Ever.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Jens Axboe <axboe@suse.de>
Thanks to Andrew for the good explanation of why this is so. akpm writes:
If a page is under writeback and we remove it from pagecache, it's still
going to get written to disk. But the VFS no longer knows about that page,
nor that this page is about to modify disk blocks.
So there might be scenarios in which those
blocks-which-are-about-to-be-written-to get reused for something else.
When writeback completes, it'll scribble on those blocks.
This won't happen in ext2/ext3-style filesystems in normal mode because the
page has buffers and try_to_release_page() will fail.
But ext2 in nobh mode doesn't attach buffers at all - it just sticks the
page in a BIO, finds some new blocks, points the BIO at those blocks and
lets it rip.
While that write IO's in flight, someone could truncate the file. Truncate
won't block on the writeout because the page isn't in pagecache any more.
So truncate will the free the blocks from the file under the page's feet.
Then something else can reallocate those blocks. Then write data to them.
Now, the original write completes, corrupting the filesystem.
Signed-off-by: Jens Axboe <axboe@suse.de>
By cleaning up the writeback logic (killing write_one_page() and the manual
set_page_dirty()), we can get rid of ->stolen inside the pipe_buffer and
just keep it local in pipe_to_file().
This also adds dirty page balancing logic and O_SYNC handling.
Signed-off-by: Jens Axboe <axboe@suse.de>
Clear the entire range, and don't increment pidx or we keep filling
the same position again and again.
Thanks to KAMEZAWA Hiroyuki.
Signed-off-by: Jens Axboe <axboe@suse.de>
It doesn't make the splice itself necessarily nonblocking (because the
actual file descriptors that are spliced from/to may block unless they
have the O_NONBLOCK flag set), but it makes the splice pipe operations
nonblocking.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Woe be unto he who builds their filesystems as modules.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
[ Obscure quote from the infamous geek bible? ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This enables the caller to migrate pages from one address space page
cache to another. In buzz word marketing, you can do zero-copy file
copies!
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds support for the sys_splice system call. Using a pipe as a
transport, it can connect to files or sockets (latter as output only).
From the splice.c comments:
"splice": joining two ropes together by interweaving their strands.
This is the "extended pipe" functionality, where a pipe is used as
an arbitrary in-memory buffer. Think of a pipe as a small kernel
buffer that you can use to transfer data from one end to the other.
The traditional unix read/write is extended with a "splice()" operation
that transfers data buffers to or from a pipe buffer.
Named by Larry McVoy, original implementation from Linus, extended by
Jens to support splicing to files and fixing the initial implementation
bugs.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jens Axboe