All GEN12 platforms supports PSR2 selective fetch but not all GEN12
platforms supports PSR2 hardware tracking(aka RKL).
This feature consists in software programming registers with the
damaged area of each plane this way hardware will only fetch from
memory those areas and sent the PSR2 selective update blocks to panel,
saving even more power.
But as initial step it is only enabling the full frame fetch at
every flip, the actual selective fetch part will come in a future
patch.
Also this is only handling the page flip side, it is still completely
missing frontbuffer modifications, that is why the
enable_psr2_sel_fetch parameter was added.
v3:
- calling intel_psr2_sel_fetch_update() during the atomic check phase
(Ville)
BSpec: 55229
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200810174144.76761-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This parameter is meant to be used when PSR issues are found as some
issues in the past was due wrong values set in VBT so this would be
a quick and easy way to ask users or for us to check if the issue is
due VBT values.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520212756.354623-1-jose.souza@intel.com
The reset member in i915_params was previously changed to unsigned, but
this failed to change the actual module parameter.
Fixes: aae970d845 ("drm/i915: Mark i915.reset as unsigned")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602151126.25626-1-jani.nikula@intel.com
Only support runtime changes through the debugfs.
i915.verbose_state_checks remains an exception, and is not exposed via
debugfs.
This depends on IGT having been updated to use the debugfs for modifying
the parameters.
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601215510.18379-3-jani.nikula@intel.com
fake_lmem_start does not need to be mutable via module param sysfs. It's
only used during driver probe.
Fixes: 1629224324 ("drm/i915/lmem: add the fake lmem region")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601215510.18379-2-jani.nikula@intel.com
The 'prefault_disable' modparam was used by IGT to prevent a few
prefaulting operations to make fault handling under struct_mutex more
prominent. With the removal of struct_mutex, this is not as important
any more and we have almost completely stopped using the parameter. The
remaining use in execbuf is now immaterial and can be dropped without
affecting coverage.
We must re-address the idea of fault injection though.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124230656.687503-1-chris@chris-wilson.co.uk
Turns out we actually already have some companies, such as Lenovo,
shipping machines with AMOLED screens that don't allow controlling the
backlight through the usual PWM interface and only allow controlling it
through the standard EDP DPCD interface. One example of one of these
laptops is the X1 Extreme 2nd Generation.
Since we've got systems that need this turned on by default now to have
backlight controls working out of the box, let's start auto-detecting it
for systems by default based on what the VBT tells us. We do this by
changing the default value for the enable_dpcd_backlight module param
from 0 to -1.
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Tested-by: Perry Yuan <pyuan@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-6-lyude@redhat.com
Add a debugfs subdirectory i915_params with all the i915 module
parameters. This is a first step, with lots of boilerplate, and not much
benefit yet.
This will result in a new device specific debugfs directory at
/sys/kernel/debug/dri/<N>/i915_params duplicating the module specific
sysfs directory at /sys/module/i915/parameters/. Going forward, all
users of the parameters should use the debugfs, with the module
parameters being phased out.
Add debugfs permissions to I915_PARAMS_FOR_EACH(). This duplicates the
mode with module parameter sysfs, but the goal is to make the module
parameters read-only initial values for device specific parameters.
0 mode will bypass debugfs creation. Use it for verbose_state_checks
which will need special attention in follow-up work.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/600101c8433e7caf9303663fc85a9972fa1f05e7.1575560168.git.jani.nikula@intel.com
Intended for upstream testing so that we can still exercise the LMEM
plumbing and !i915_ggtt_has_aperture paths. Smoke tested on Skull Canyon
device. This works by allocating an intel_memory_region for a reserved
portion of system memory, which we treat like LMEM. For the LMEMBAR we
steal the aperture and 1:1 it map to the stolen region.
To enable simply set the i915 modparam fake_lmem_start= on the kernel
cmdline with the start of reserved region(see memmap=). The size of the
region we can use is determined by the size of the mappable aperture, so
the size of reserved region should be >= mappable_end. For now we only
enable for the selftests. Depends on CONFIG_DRM_I915_UNSTABLE being
enabled.
eg. memmap=2G$16G i915.fake_lmem_start=0x400000000
v2: make fake_lmem_start an i915 modparam
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030173320.8850-1-matthew.auld@intel.com
Commit f2db53f14d ("drm/i915: Replace "_load" with "_probe"
consequently") deliberately left the name of the module parameter
unchanged as that would require a corresponding change on IGT size.
Now as the IGT side change has been submitted, complete the switch to
the "probe" nomenclature.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029102036.6326-3-janusz.krzysztofik@linux.intel.com
Enable dc3co state in enable_dc module param and add dc3co
enable mask to allowed_dc_mask and gen9_dc_mask.
v1: Adding enable_dc=3,4 options to enable DC3CO with DC5 and DC6
independently. [Animesh]
v2: Using a switch statement for cleaner code. [Animesh]
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-3-anshuman.gupta@intel.com
Commit f774f09649 ("drm/i915/guc: Turn on GuC/HuC auto mode") changed
the default from 0 to -1 but forgot to update the description.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: f774f09649 ("drm/i915/guc: Turn on GuC/HuC auto mode")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717104418.23809-1-tvrtko.ursulin@linux.intel.com
If LFP backlight type setting from VBT was "VESA eDP AUX Interface".
Driver should check panel capability and try to initialize aux backlight.
No matter i915_modparams.enable_dpcd_backlight was enabled or not.
v2: access dev_priv->vbt.backlight.type directly and remove unused function.
v3: 1. Modify i915.enable_dpcd_backlight type from bool to int and give default
value as 0 (disable).
2. Add a judgement to check LFP backlight type was aux interface or not.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1561045456-12171-1-git-send-email-shawn.c.lee@intel.com
The i915.alpha_support module parameter has caused some confusion along
the way. Add new i915.force_probe parameter to specify PCI IDs of
devices to probe, when the devices are recognized but not automatically
probed by the driver. The name is intended to reflect what the parameter
effectively does, avoiding any overloaded semantics of "alpha" and
"support".
The parameter supports "" to disable, "<pci-id>,[<pci-id>,...]" to
enable force probe for one or more devices, and "*" to enable force
probe for all known devices.
Also add new CONFIG_DRM_I915_FORCE_PROBE config option to replace the
DRM_I915_ALPHA_SUPPORT option. This defaults to "*" if
DRM_I915_ALPHA_SUPPORT=y.
Instead of replacing i915.alpha_support immediately, let the two coexist
for a while, with a deprecation message, for a transition period.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190506134801.28751-1-jani.nikula@intel.com
We really want to have fastboot enabled by default to avoid an ugly
modeset during boot.
Rather then enabling it everywhere, lets start with enabling it on
Skylake and newer.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124130114.3967-1-maarten.lankhorst@linux.intel.com
Hide the enable_gvt modparam in the default scenario where
support has not been compiled in.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181116144447.7836-1-joonas.lahtinen@linux.intel.com
When building the kernel with Clang with defconfig and CONFIG_64BIT
disabled, vmlinux fails to link because of the BUILD_BUG in
_print_param.
ld: drivers/gpu/drm/i915/i915_params.o: in function `i915_params_dump':
i915_params.c:(.text+0x56): undefined reference to
`__compiletime_assert_191'
This function is semantically invalid unless the code is first inlined
then constant folded, which doesn't work for Clang because semantic
analysis happens before optimization/inlining.
[The above written by Nathan Chancellor <natechancellor@gmail.com>]
Use WARN_ONCE() instead of BUILD_BUG() to avoid the problem. The
WARN_ONCE() should get optimized away unless there's a type that's not
handled by _print_param().
References: https://github.com/ClangBuiltLinux/linux/issues/191
References: http://mid.mail-archive.com/20181009171401.14980-1-natechancellor@gmail.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016122938.18757-1-jani.nikula@intel.com
Now that we are confident in providing full-ppgtt where supported,
remove the ability to override the context isolation.
v2: Remove faked aliasing-ppgtt for testing as it no longer is accepted.
v3: s/USES/HAS/ to match usage and reject attempts to load the module on
old GVT-g setups that do not provide support for full-ppgtt.
v4: Insulate ABI ppGTT values from our internal enum (later plans
involve moving ppGTT depth out of the enum, thus potentially breaking
ABI unless we document the current values).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926201222.5643-1-chris@chris-wilson.co.uk
Reduce the module parameter to enable or disable.
The link stand by vs full link off was used only once.
And it was actually masking another bug fixed by commit
'84bb2916a683 ("drm/i915/psr: Check for SET_POWER_CAPABLE
bit at PSR init time.")'
So, let's remove these options for now. End goal is to
fully remove the mod param, moving it to a debugfs
interface in upcoming patches.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712052715.8177-1-rodrigo.vivi@intel.com
The command parser is feature complete, stable and required by
userspace. In commit 41736a8e33 ("drm/i915: Use the precomputed value
for whether to enable command parsing") I accidentally removed control
from the modparam, and as no one has complained, remove the left
over modparam completely!
References: 41736a8e33 ("drm/i915: Use the precomputed value for whether to enable command parsing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517150727.10431-1-chris@chris-wilson.co.uk
Use i915.dmc_firmware_path to override default firmware for the platform
and bypassing version checks.
v2: add missing param struct member declaration (David)
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424122016.2416-1-jani.nikula@intel.com
We're using i915_inject_load_failure() to inject dummy
faults during driver load, but since this is debug utility
we shouldn't expose it in default config as it consumes
both code and data.
add/remove: 0/1 grow/shrink: 0/2 up/down: 0/-302 (-302)
Function old new delta
__i915_inject_load_failure 61 - -61
i915_gem_init 1331 1268 -63
i915_driver_load 5923 5745 -178
Total: Before=1177454, After=1177152, chg -0.03%
add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-4 (-4)
Data old new delta
i915_load_fail_count 4 - -4
Total: Before=56762, After=56758, chg -0.01%
add/remove: 4/8 grow/shrink: 0/1 up/down: 245/-591 (-346)
RO Data old new delta
__param_str_inject_load_failure 20 - -20
__UNIQUE_ID_inject_load_failuretype200 34 - -34
__param_inject_load_failure 40 - -40
__func__ 4998 4896 -102
__UNIQUE_ID_inject_load_failure201 150 - -150
Total: Before=119095, After=118749, chg -0.29%
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180201173248.3912-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We used value -1 to indicate "disabled" and values 0..3 to
indicate "enabled", but most of our other modparams are using
-1 for "auto" mode and 0 for "disable". For consistency let's
change our log level values to:
-1: auto (depends on platform and Kconfig.debug settings)
0: disabled
1: enabled (severity level 0 = min)
2: enabled (severity level 1)
3: enabled (severity level 2)
4: enabled (severity level 3 = max)
v2: fix commit message (Sagar)
display sanitized modparam value (Sagar)
unify sanitize messages (Sagar/Michal)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111152441.21676-1-michal.wajdeczko@intel.com
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We dump modparams in few places (debugfs, gpu_error) using different
functions. Lets add reusable function to avoid code duplication.
add/remove: 1/0 grow/shrink: 0/2 up/down: 1096/-2339 (-1243)
Function old new delta
i915_params_dump - 1096 +1096
i915_capabilities 1353 185 -1168
i915_error_state_to_str 5507 4336 -1171
Total: Before=1285716, After=1284473, chg -0.10%
v2: use forward decl rather than include (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219114346.26308-3-michal.wajdeczko@intel.com
We currently have two module parameters that control GuC:
"enable_guc_loading" and "enable_guc_submission". Whenever
we need submission=1, we also need loading=1. We also need
loading=1 when we want to want to load and verify the HuC.
Lets combine above module parameters into one "enable_guc"
modparam. New supported bit values are:
0=disable GuC (no GuC submission, no HuC)
1=enable GuC submission
2=enable HuC load
Special value "-1" can be used to let driver decide what
option should be enabled for given platform based on
hardware/firmware availability or preference.
Explicit enabling any of the GuC features makes GuC load
a required step, fallback to non-GuC mode will not be
supported.
v2: Don't use -EIO
v3: define modparam bits (Chris)
v4: rely on implicit cast (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-6-michal.wajdeczko@intel.com
It has been many years since the last confirmed sighting (and fix) of an
RC6 related bug (usually a system hang). Remove the parameter to stop
users from setting dangerous values, as they often set it during triage
and end up disabling the entire runtime pm instead (the option is not a
fine scalpel!).
Furthermore, it allows users to set known dangerous values which were
intended for testing and not for production use. For testing, we can
always patch in the required setting without having to expose ourselves
to random abuse.
v2: Fixup NEEDS_WaRsDisableCoarsePowerGating fumble, and document the
lack of ilk support better.
v3: Clear intel_info->rc6p if we don't support rc6 itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201113030.18360-1-chris@chris-wilson.co.uk
Having disabled the broken semaphores on Sandybridge, there is no need
for a modparam any more, so remove it in favour of a simple
HAS_LEGACY_SEMAPHORES() guard.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-5-chris@chris-wilson.co.uk
Execlists and legacy ringbuffer submission are no longer feature
comparable (execlists now offer greater functionality that should
overcome their performance hit) and obsoletes the unsafe module
parameter, i.e. comparing the two modes of execution is no longer
useful, so remove the debug tool.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #i915_perf.c
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-1-chris@chris-wilson.co.uk
This has been unused since commit afa8ce5b30
("drm/i915: Nuke legacy flip queueing code").
Changes since v1:
- Rebase on top of all the changes to modparams.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
\o/-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004094416.31306-1-maarten.lankhorst@linux.intel.com
By combining default value into helper macro we can initialize
modparams struct in the same automatic way as it was declared.
This will initialize members in the same order as declared
and additionally will disallow declaring new member without
proper default value for it.
v2: make MEMBER macro more robust (Joonas)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170925105008.46060-2-michal.wajdeczko@intel.com
Our global struct with params is named exactly the same way
as new preferred name for the drm_i915_private function parameter.
To avoid such name reuse lets use different name for the global.
v5: pure rename
v6: fix
Credits-to: Coccinelle
@@
identifier n;
@@
(
- i915.n
+ i915_modparams.n
)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919193846.38060-1-michal.wajdeczko@intel.com
We're always specifying description of each module param in
separate macro. Let's combine description into our main macro.
Started with Coccinelle, followed by minor cleanup.
@match1@
declarer name MODULE_PARM_DESC;
identifier n;
constant c;
@@
(
- MODULE_PARM_DESC(n, c);
)
@fix1 depends on match1@
declarer name i915_param_named;
declarer name i915_param_named_unsafe;
identifier match1.n;
constant match1.c;
@@
(
i915_param_named(n, ...
+ , c
);
|
i915_param_named_unsafe(n, ...
+ , c
);
)
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914150805.28376-4-michal.wajdeczko@intel.com
As we now use same name for public module param and its local
representation we can simplify param definition macro.
Changes done with Coccinelle:
@@
declarer name module_param_named;
declarer name module_param_named_unsafe;
declarer name i915_param_named;
declarer name i915_param_named_unsafe;
identifier n;
@@
(
-module_param_named(n, i915.n,
+i915_module_param_named(n,
...);
|
-module_param_named_unsafe(n, i915.n,
+i915_module_param_named_unsafe(n,
...);
)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914150805.28376-3-michal.wajdeczko@intel.com
This modparam affects not only LVDS but also eDP panels. Additionally
with this rename we will keep modparam and i915_params field name in sync.
This patch will unblock us with further improvements around params defs.
Suggested-by: Ville Syrjala <ville.syrjala@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914150805.28376-2-michal.wajdeczko@intel.com
Sometimes it would be most enlightening to debug systems by replacing
the VBT to be used. For example, in the referenced bug the BIOS provides
different VBT depending on the boot mode (UEFI vs. legacy). It would be
interesting to try the failing boot mode with the VBT from the working
boot, and see if that makes a difference.
Add a module parameter to load the VBT using the firmware loader, not
unlike the EDID firmware mechanism.
As a starting point for experimenting, one can pick up the BIOS provided
VBT from /sys/kernel/debug/dri/0/i915_opregion/i915_vbt.
v2: clarify firmware load return value check (Bob)
v3: kfree the loaded firmware blob
References: https://bugs.freedesktop.org/show_bug.cgi?id=97822#c83
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817115209.25912-1-jani.nikula@intel.com
This patch adds option to enable dynamic backlight for eDP
panel that supports this feature via DPCD register and
set minimum / maximum brightness to 0% and 100% of the
normal brightness.
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622190339.142671-4-puthik@chromium.org
Add heuristic to decide that AUX or PWM pin should use for
backlight brightness adjustment and modify i915 param description
to have auto, force disable, and force enable.
The heuristic to determine that using AUX pin is better than using
PWM pin is that the panel support any of the feature list here.
- Regional backlight brightness adjustment
- Backlight PWM frequency set
- More than 8 bits resolution of brightness level
- Backlight enablement via AUX and not by BL_ENABLE pin
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622190339.142671-3-puthik@chromium.org
`guc_firmware_path` and `huc_firmware_path` module parameters are added.
Using the parameter disables version checks and loads desired firmware
instead of the default one.
v2: make params unsafe && notice about disabled fw check (J. Lahtinen)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
i915 is pretty much feature complete. Support for atomic i915-specific
connector properties is still missing; those properties can (for now)
only be set through the legacy ioctl.
ILK style watermarks and gen9+ watermarks are handled atomically,
and nonblocking modesets work. FBC has also been made to work with
atomic.
gen4x- and vlv/chv watermarks still need to be fixed, so disable atomic
by default there for now.
Flip the switch!!
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486021302-24910-1-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Fix checkpatch warning about extra space in match_info]
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Lyude <lyude@redhat.com>
José Roberto de Souza