This is related to two previous changes. Commit dfe4529ee4
("scripts/gdb: find vmlinux where it was before") and commit da036ae147
("scripts/gdb: handle split debug").
Although Chrome OS has been using the debug suffix for modules for a
while, it has just recently started using it for vmlinux as well. That
means we've now got to improve the detection of "vmlinux" to also handle
that it might end with ".debug".
Link: https://lkml.kernel.org/r/20211028151120.v2.1.Ie6bd5a232f770acd8c9ffae487a02170bad3e963@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm64 uses SP_EL0 to save the current task_struct address. While running
in EL0, SP_EL0 is clobbered by userspace. So if the upper bit is not 1
(not TTBR1), the current address is invalid. This patch checks the upper
bit of SP_EL0, if the upper bit is 1, lx_current() of arm64 will return
the derefrence of current task. Otherwise, lx_current() will tell users
they are running in userspace(EL0).
While arm64 is running in EL0, it is actually pointless to print current
task as the memory of kernel space is not accessible in EL0.
Link: https://lkml.kernel.org/r/20210314203444.15188-3-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "scripts/gdb: clarify the platforms supporting lx_current and add arm64 support", v2.
lx_current depends on per_cpu current_task variable which exists on x86
only. so it actually works on x86 only. the 1st patch documents this
clearly; the 2nd patch adds support for arm64.
This patch (of 2):
x86 is the only architecture which has per_cpu current_task:
arch$ git grep current_task | grep -i per_cpu
x86/include/asm/current.h:DECLARE_PER_CPU(struct task_struct *, current_task);
x86/kernel/cpu/common.c:DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned =
x86/kernel/cpu/common.c:EXPORT_PER_CPU_SYMBOL(current_task);
x86/kernel/cpu/common.c:DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
x86/kernel/cpu/common.c:EXPORT_PER_CPU_SYMBOL(current_task);
x86/kernel/smpboot.c: per_cpu(current_task, cpu) = idle;
On other architectures, lx_current() will lead to a python exception:
(gdb) p $lx_current().pid
Python Exception <class 'gdb.error'> No symbol "current_task" in current context.:
Error occurred in Python: No symbol "current_task" in current context.
To avoid more people struggling and wasting time in other architectures,
document it.
Link: https://lkml.kernel.org/r/20210314203444.15188-1-song.bao.hua@hisilicon.com
Link: https://lkml.kernel.org/r/20210314203444.15188-2-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we store the relative path, the user might later cd to a different
directory, and that would break the automatic symbol resolving that
happens when a module is loaded into the target kernel. Fix this by
storing the abspath() of each path given, just like we already do for the
cwd (os.getcwd() is absolute.)
Link: https://lkml.kernel.org/r/20201217091747.bf4332cf2b35.I10ebbdb7e9b80ab1a5cddebf53d073be8232d656@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the list is uninitialized (next pointer is NULL), list_for_each gets
stuck in an infinite loop. Print a message and treat list as empty.
Link: https://lkml.kernel.org/r/4ae23bb1-c333-f669-da2d-fa35c4f49018@amazon.com
Signed-off-by: George Prekas <prekageo@amazon.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As commit d0e628cd81 ("kbuild: doc: clarify the difference between
extra-y and always-y") explained, extra-y should be used for listing
the prerequisites of vmlinux.
These targets are not related to vmlinux. always-y is a better fix.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9vEl
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"The big new thing is the fully lockless ringbuffer implementation,
including the support for continuous lines. It will allow to store and
read messages in any situation wihtout the risk of deadlocks and
without the need of temporary per-CPU buffers.
The access is still serialized by logbuf_lock. It synchronizes few
more operations, for example, temporary buffer for formatting the
message, syslog and kmsg_dump operations. The lock removal is being
discussed and should be ready for the next release.
The continuous lines are handled exactly the same way as before to
avoid regressions in user space. It means that they are appended to
the last message when the caller is the same. Only the last message
can be extended.
The data ring includes plain text of the messages. Except for an
integer at the beginning of each message that points back to the
descriptor ring with other metadata.
The dictionary has to stay. journalctl uses it to filter the log. It
allows to show messages related to a given device. The dictionary
values are stored in the descriptor ring with the other metadata.
This is the first part of the printk rework as discussed at Plumbers
2019, see https://lore.kernel.org/r/87k1acz5rx.fsf@linutronix.de. The
next big step will be handling consoles by kthreads during the normal
system operation. It will require special handling of situations when
the kthreads could not get scheduled, for example, early boot,
suspend, panic.
Other changes:
- Add John Ogness as a reviewer for printk subsystem. He is author of
the rework and is familiar with the code and history.
- Fix locking in serial8250_do_startup() to prevent lockdep report.
- Few code cleanups"
* tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (27 commits)
printk: Use fallthrough pseudo-keyword
printk: reduce setup_text_buf size to LOG_LINE_MAX
printk: avoid and/or handle record truncation
printk: remove dict ring
printk: move dictionary keys to dev_printk_info
printk: move printk_info into separate array
printk: reimplement log_cont using record extension
printk: ringbuffer: add finalization/extension support
printk: ringbuffer: change representation of states
printk: ringbuffer: clear initial reserved fields
printk: ringbuffer: add BLK_DATALESS() macro
printk: ringbuffer: relocate get_data()
printk: ringbuffer: avoid memcpy() on state_var
printk: ringbuffer: fix setting state in desc_read()
kernel.h: Move oops_in_progress to printk.h
scripts/gdb: update for lockless printk ringbuffer
scripts/gdb: add utils.read_ulong()
docs: vmcoreinfo: add lockless printk ringbuffer vmcoreinfo
printk: reduce LOG_BUF_SHIFT range for H8300
printk: ringbuffer: support dataless records
...
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The
current implementation stores the property names each time they are
used. This requires more space than otherwise necessary. Also,
because the dictionary entries are currently considered optional,
it cannot be relied upon that they are always available, even if the
writer wanted to store them. These issues will increase should new
dictionary properties be introduced.
Rather than storing the subsystem and device properties in the
dict ring, introduce a struct dev_printk_info with separate fields
to store only the property values. Embed this struct within the
struct printk_info to provide guaranteed availability.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
Add support for extending the newest data block. For this, introduce
a new finalization state (desc_finalized) denoting a committed
descriptor that cannot be extended.
Until a record is finalized, a writer can reopen that record to
append new data. Reopening a record means transitioning from the
desc_committed state back to the desc_reserved state.
A writer can explicitly finalize a record if there is no intention
of extending it. Also, records are automatically finalized when a
new record is reserved. This relieves writers of needing to
explicitly finalize while also making such records available to
readers sooner. (Readers can only traverse finalized records.)
Four new memory barrier pairs are introduced. Two of them are
insignificant additions (data_realloc:A/desc_read:D and
data_realloc:A/data_push_tail:B) because they are alternate path
memory barriers that exactly match the purpose, pairing, and
context of the two existing memory barrier pairs they provide an
alternate path for. The other two new memory barrier pairs are
significant additions:
desc_reopen_last:A / _prb_commit:B - When reopening a descriptor,
ensure the state transitions back to desc_reserved before
fully trusting the descriptor data.
_prb_commit:B / desc_reserve:D - When committing a descriptor,
ensure the state transitions to desc_committed before checking
the head ID to see if the descriptor needs to be finalized.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-6-john.ogness@linutronix.de
Rather than deriving the state by evaluating bits within the flags
area of the state variable, assign the states explicit values and
set those values in the flags area. Introduce macros to make it
simple to read and write state values for the state variable.
Although the functionality is preserved, the binary representation
for the states is changed.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-5-john.ogness@linutronix.de
With the introduction of the lockless printk ringbuffer, the data
structure for the kernel log buffer was changed. Update the gdb
scripts to be able to parse/print the new log buffer structure.
Fixes: 896fbe20b4 ("printk: use the lockless ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Petr Mladek <pmladek@suse.com>
[akpm@linux-foundation.org: A typo fix.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814212525.6118-3-john.ogness@linutronix.de
Add a function for reading unsigned long values, which vary in size
depending on the architecture.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200814212525.6118-2-john.ogness@linutronix.de
Fixes the observed warnings:
scripts/gdb/linux/rbtree.py:20: SyntaxWarning: "is" with a literal. Did
you mean "=="?
if node is 0:
scripts/gdb/linux/rbtree.py:36: SyntaxWarning: "is" with a literal. Did
you mean "=="?
if node is 0:
It looks like this is a new warning added in Python 3.8. I've only seen
this once after adding the add-auto-load-safe-path rule to my ~/.gdbinit
for a new tree.
Fixes: commit 449ca0c95e ("scripts/gdb: add rb tree iterating utilities")
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Aymeric Agon-Rambosson <aymeric.agon@yandex.com>
Link: http://lkml.kernel.org/r/20200805225015.2847624-1-ndesaulniers@google.com
Link: https://adamj.eu/tech/2020/01/21/why-does-python-3-8-syntaxwarning-for-is-literal/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm-sleep:
PM: sleep: spread "const char *" correctness
PM: hibernate: fix white space in a few places
freezer: Add unsafe version of freezable_schedule_timeout_interruptible() for NFS
PM: sleep: core: Emit changed uevent on wakeup_sysfs_add/remove
* pm-domains:
PM: domains: Restore comment indentation for generic_pm_domain.child_links
PM: domains: Fix up terminology with parent/child
* powercap:
powercap: Add Power Limit4 support
powercap: idle_inject: Replace play_idle() with play_idle_precise() in comments
powercap: intel_rapl: add support for Sapphire Rapids
* pm-tools:
pm-graph v5.7 - important s2idle fixes
cpupower: Replace HTTP links with HTTPS ones
cpupower: Fix NULL but dereferenced coccicheck errors
cpupower: Fix comparing pointer to 0 coccicheck warns
Commit ed66f991bb ("module: Refactor section attr into bin attribute")
removed the 'name' field from 'struct module_sect_attr' triggering the
following error when invoking lx-symbols:
(gdb) lx-symbols
loading vmlinux
scanning for modules in linux/build
loading @0xffffffffc014f000: linux/build/drivers/net/tun.ko
Python Exception <class 'gdb.error'> There is no member named name.:
Error occurred in Python: There is no member named name.
This patch fixes the issue taking the module name from the 'struct
attribute'.
Fixes: ed66f991bb ("module: Refactor section attr into bin attribute")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Kieran Bingham <kbingham@kernel.org>
Link: http://lkml.kernel.org/r/20200722102239.313231-1-sgarzare@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The genpd infrastructure uses the terms master/slave, but such uses have
no external exposures (not even in Documentation/driver-api/pm/*) and are
not mandated by nor associated with any external specifications. Change
the language used through-out to parent/child.
There was one possible exception in the debugfs node
"pm_genpd/pm_genpd_summary" but its path has no hits outside of the
kernel itself when performing a code search[1], and it seems even this
single usage has been non-functional since it was introduced due to a
typo in the Python ("apend" instead of correct "append"). Fix the typo
while we're at it.
Link: https://codesearch.debian.net/ # [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current implementations of the rb_first() and rb_last() gdb
functions have a variable that references itself in its instanciation,
which causes the function to throw an error if a specific condition on
the argument is met. The original author rather intended to reference
the argument and made a typo. Referring the argument instead makes the
function work as intended.
Signed-off-by: Aymeric Agon-Rambosson <aymeric.agon@yandex.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20200427051029.354840-1-aymeric.agon@yandex.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc's -freorder-blocks-and-partition option makes it group frequently
and infrequently used code in .text.hot and .text.unlikely sections
respectively. At least when building modules on s390, this option is
used by default.
gdb assumes that all code is located in .text section, and that .text
section is located at module load address. With such modules this is no
longer the case: there is code in .text.hot and .text.unlikely, and
either of them might precede .text.
Fix by explicitly telling gdb the addresses of code sections.
It might be tempting to do this for all sections, not only the ones in
the white list. Unfortunately, gdb appears to have an issue, when
telling it about e.g. loadable .note.gnu.build-id section causes it to
think that non-loadable .note.Linux section is loaded at address 0,
which in turn causes NULL pointers to be resolved to bogus symbols. So
keep using the white list approach for the time being.
Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently lx-symbols assumes that module text is always located at
module->core_layout->base, but s390 uses the following layout:
+------+ <- module->core_layout->base
| GOT |
+------+ <- module->core_layout->base + module->arch->plt_offset
| PLT |
+------+ <- module->core_layout->base + module->arch->plt_offset +
| TEXT | module->arch->plt_size
+------+
Therefore, when trying to debug modules on s390, all the symbol
addresses are skewed by plt_offset + plt_size.
Fix by adding plt_offset + plt_size to module_addr in
load_module_symbols().
Link: http://lkml.kernel.org/r/20191017085917.81791-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_PRINTK_CALLER is set, struct printk_log contains an
additional member caller_id. This affects the offset of the log text.
Account for this by using the type information from gdb to determine all
the offsets instead of using hardcoded values.
This fixes following error:
(gdb) lx-dmesg
Python Exception <class 'ValueError'> embedded null character:
Error occurred in Python command: embedded null character
The read_u* utility functions now take an offset argument to make them
easier to use.
Link: http://lkml.kernel.org/r/20191011142500.2339-1-joel.colledge@linbit.com
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some systems (like Chrome OS) may use "split debug" for kernel modules.
That means that the debug symbols are in a different file than the main
elf file. Let's handle that by also searching for debug symbols that end
in ".ko.debug".
This is a packaging topic. You can take a normal elf file and split the
debug out of it using objcopy. Try "man objcopy" and then take a look at
the "--only-keep-debug" option. It'll give you a whole recipe for doing
splitdebug. The suffix used for the debug symbols is arbitrary. If
people have other another suffix besides ".ko.debug" then we could
presumably support that too...
For portage (which is the packaging system used by Chrome OS) split debug
is supported by default (and the suffix is .ko.debug). ...and so in
Chrome OS we always get the installed elf files stripped and then the
symbols stashed away.
At the moment we don't actually use the normal portage magic to do this
for the kernel though since it affects our ability to get good stack dumps
in the kernel. We instead pass a script as "strip" [1].
[1] https://chromium.googlesource.com/chromiumos/overlays/chromiumos-overlay/+/refs/heads/master/eclass/cros-kernel/strip_splitdebug
Link: http://lkml.kernel.org/r/20190730234052.148744-1-dianders@chromium.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add helper commands and functions for finding pointers to struct device
by enumerating linux device bus/class infrastructure. This can be used
to fetch subsystem and driver-specific structs:
(gdb) p *$container_of($lx_device_find_by_class_name("net", "eth0"), "struct net_device", "dev")
(gdb) p *$container_of($lx_device_find_by_bus_name("i2c", "0-004b"), "struct i2c_client", "dev")
(gdb) p *(struct imx_port*)$lx_device_find_by_class_name("tty", "ttymxc1")->parent->driver_data
Several generic "lx-device-list" functions are included to enumerate
devices by bus and class:
(gdb) lx-device-list-bus usb
(gdb) lx-device-list-class
(gdb) lx-device-list-tree &platform_bus
Similar information is available in /sys but pointer values are
deliberately hidden.
Link: http://lkml.kernel.org/r/c948628041311cbf1b9b4cff3dda7d2073cb3eaa.1561492937.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is like /sys/kernel/debug/pm/pm_genpd_summary except it's
accessible through a debugger.
This can be useful if the target crashes or hangs because power domains
were not properly enabled.
Link: http://lkml.kernel.org/r/f9ee627a0d4f94b894aa202fee8a98444049bed8.1561492937.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 25b146c5b8 ("kbuild: allow Kbuild to start from any directory")
deprecated KBUILD_SRCTREE.
It is only used in tools/testing/selftest/ to distinguish out-of-tree
build. Replace it with a new boolean flag, building_out_of_srctree.
I also replaced the conditional ($(srctree),.) because the next commit
will allow an absolute path to be used for $(srctree) even when building
in the source tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
CLK_GET_RATE_NOCACHE depends on CONFIG_COMMON_CLK. Importing constants.py
when CONFIG_COMMON_CLK is not defined causes:
(gdb) lx-symbols
(...)
File "scripts/gdb/linux/proc.py", line 15, in <module>
from linux import constants
File "scripts/gdb/linux/constants.py", line 2, in <module>
LX_CLK_GET_RATE_NOCACHE = gdb.parse_and_eval("CLK_GET_RATE_NOCACHE")
gdb.error: No symbol "CLK_GET_RATE_NOCACHE" in current context.
Link: http://lkml.kernel.org/r/20190523195313.24701-1-farosas@linux.ibm.com
Fixes: e7e6f462c1 ("scripts/gdb: print cached rate in lx-clk-summary")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The clk rate is always stored in clk_core but might be out of date and
require calls to update from hardware.
Deal with that case by printing a (c) suffix.
Link: http://lkml.kernel.org/r/1a474318982a5f0125f2360c4161029b17f56bd1.1556881728.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An incorrect argument to list_for_each is an internal error in gdb
scripts so a TypeError should be raised. The gdb.GdbError exception
type is intended for user errors such as incorrect invocation.
Drop the type assertion in list_for_each_entry because list_for_each
isn't going to suddenly yield something else.
Applies to both list and hlist
Link: http://lkml.kernel.org/r/c1d3fd4db13d999a3ba57f5bbc1924862d824f61.1556881728.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Finding an individual clk_core requires walking the tree which can be
quite complicated so add a helper for easy access.
(gdb) print *(struct clk_scu*)$lx_clk_core_lookup("uart0_clk")->hw
Link: http://lkml.kernel.org/r/Message-ID:
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an lx-clk-summary command which prints a subset of
/sys/kernel/debug/clk/clk_summary.
This can be used to examine hangs caused by clk not being enabled.
Link: http://lkml.kernel.org/r/Message-ID:
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These scripts have some pep8 style warnings. Fix them up so that this
directory is all pep8 clean.
Link: http://lkml.kernel.org/r/20190329220844.38234-6-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement a command to print the timer list, much like how
/proc/timer_list is implemented. This can be used to look at the
pending timers on a crashed system.
[swboyd@chromium.org: v2]
Link: http://lkml.kernel.org/r/20190329220844.38234-5-swboyd@chromium.org
Link: http://lkml.kernel.org/r/20190325184522.260535-5-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement gdb functions for rb_first(), rb_last(), rb_next(), and
rb_prev(). These can be useful to iterate through the kernel's
red-black trees.
[swboyd@chromium.org: v2]
Link: http://lkml.kernel.org/r/20190329220844.38234-4-swboyd@chromium.org
Link: http://lkml.kernel.org/r/20190325184522.260535-4-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lx-configdump <file> dumps the contents of the gzipped .config to a text
file when the config is included in the kernel with CONFIG_IKCONFIG. By
default, the file written is called config.txt, but it can be any user
supplied filename as well. If the kernel config is in a module
(configs.ko), then it can be loaded along with symbols for the module
loaded with 'lx-symbols' and then this command will still work.
Obviously if you have the whole vmlinux then this can also be achieved
with scripts/extract-ikconfig, but this gdb script can be useful to
confirm that the memory contents of the config in memory and the vmlinux
contents on disk match what is expected.
[swboyd@chromium.org: v2]
Link: http://lkml.kernel.org/r/20190329220844.38234-3-swboyd@chromium.org
Link: http://lkml.kernel.org/r/20190325184522.260535-3-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "gdb script for kconfig and timer list".
This is a handful of changes to the kernel's gdb scripts to do some more
debugging with kgdb. The first patch allows the vmlinux to be reloaded
from where it was specified on the command line so that this set of
scripts can be used from anywhere. The second patch adds a script to
dump the config.gz to a file on the host debugging machine. The third
patch adds some rb tree utilities and the last patch uses those rb tree
walking utilities to dump out the contents of /proc/timer_list from a
system under debug.
This patch (of 5):
If I run 'gdb <path/to/vmlinux>' and there's the vmlinux-gdb.py file
there I can properly see symbols and use the lx commands provided by the
GDB scripts. But once I run 'lx-symbols' at the command prompt, gdb
reloads the vmlinux symbols assuming that this script was run from the
directory that has vmlinux at the root. That isn't always true, but we
could just look and see what symbols were already loaded and use that
instead. Let's do that so this can work by being invoked anywhere.
Link: http://lkml.kernel.org/r/20190325184522.260535-2-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jackie Liu <liuyun01@kylinos.cn>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KBUILD_SRC was conventionally used for some different purposes:
[1] To remember the source tree path
[2] As a flag to check if sub-make is already done
[3] As a flag to check if Kbuild runs out of tree
For [1], we do not need to remember it because the top Makefile
can compute it by $(realpath $(dir $(lastword $(MAKEFILE_LIST))))
[2] has been replaced with self-commenting 'sub_make_done'.
For [3], we can distinguish in-tree/out-of-tree by comparing
$(srctree) and '.'
This commit converts [3] to prepare for the KBUILD_SRC removal.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module build
- allow to add optional flags to dpkg-buildpackage when building deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y9YG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- do not generate unneeded top-level built-in.a
- let git ignore O= directory entirely
- optimize scripts/kallsyms slightly
- exclude DWARF info from *.s regardless of config options
- fix GCC toolchain search path for Clang to prepare ld.lld support
- do not generate modules.order when CONFIG_MODULES is disabled
- simplify single target rules and remove VPATH for external module
build
- allow to add optional flags to dpkg-buildpackage when building
deb-pkg
- move some compiler option tests from Makefile to Kconfig
- various Makefile cleanups
* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: remove scripts/basic/% build target
kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
kbuild: clean up scripts/gcc-version.sh
kbuild: remove cc-version macro
kbuild: update comment block of scripts/clang-version.sh
kbuild: remove commented-out INITRD_COMPRESS
kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
kbuild: move ".config not found!" message from Kconfig to Makefile
kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
kbuild: simplify single target rules
kbuild: remove empty rules for makefiles
kbuild: make -r/-R effective in top Makefile for old Make versions
kbuild: move tools_silent to a more relevant place
kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
kbuild: refactor cc-cross-prefix implementation
kbuild: hardcode genksyms path and remove GENKSYMS variable
scripts/gdb: refactor rules for symlink creation
kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
scripts/gdb: do not descend into scripts/gdb from scripts
...
Since commit 1751e8a6cb ("Rename superblock flags (MS_xyz ->
SB_xyz)"), scripts/gdb should be updated to replace MS_xyz with SB_xyz.
This change didn't directly affect the running operation of scripts/gdb
until commit e262e32d6b "vfs: Suppress MS_* flag defs within the
kernel unless explicitly enabled" removed the definitions used by
constants.py.
Update constants.py.in to utilise the new internal flags, matching the
implementation at fs/proc_namespace.c::show_sb_opts.
Note to stable, e262e32d6b landed in v5.0-rc1 (which was just
released), so we'll want this picked back to 5.0 stable once this patch
hits mainline (akpm just picked it up). Without this, debugging a
kernel a kernel via GDB+QEMU is broken in the 5.0 release.
[kieran.bingham@ideasonboard.com: add fixes tag, reword commit message]
Link: http://lkml.kernel.org/r/20190305103014.25847-1-kieran.bingham@ideasonboard.com
Fixes: e262e32d6b "vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled"
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Dan Robertson <danlrobertson89@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gdb-scripts is not a real object, but (ab)used like a phony target.
Rewrite the code in a more Kbuild-ish way. Add symlinks to extra-y
and use if_changed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Currently, Kbuild descends from scripts/Makefile to scripts/gdb/Makefile
just for creating symbolic links, but it does not need to do it so early.
Merge the two descending paths to simplify the code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
A bug is present in GDB which causes early string termination when
parsing variables. This has been reported [0], but we should ensure
that we can support at least basic printing of the core kernel strings.
For current gdb version (has been tested with 7.3 and 8.1), 'lx-version'
only prints one character.
(gdb) lx-version
L(gdb)
This can be fixed by casting 'linux_banner' as (char *).
(gdb) lx-version
Linux version 4.19.0-rc1+ (changbin@acer) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21 SMP Sat Sep 1 21:43:30 CST 2018
[0] https://sourceware.org/bugzilla/show_bug.cgi?id=20077
[kbingham@kernel.org: add detail to commit message]
Link: http://lkml.kernel.org/r/20181111162035.8356-1-kieran.bingham@ideasonboard.com
Fixes: 2d061d9994 ("scripts/gdb: add version command")
Signed-off-by: Du Changbin <changbin.du@gmail.com>
Signed-off-by: Kieran Bingham <kbingham@kernel.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since kernel 4.9, the thread_info has been moved into task_struct, no
longer locates at the bottom of kernel stack.
See commits c65eacbe29 ("sched/core: Allow putting thread_info into
task_struct") and 15f4eae70d ("x86: Move thread_info into
task_struct").
Before fix:
(gdb) set $current = $lx_current()
(gdb) p $lx_thread_info($current)
$1 = {flags = 1470918301}
(gdb) p $current.thread_info
$2 = {flags = 2147483648}
After fix:
(gdb) p $lx_thread_info($current)
$1 = {flags = 2147483648}
(gdb) p $current.thread_info
$2 = {flags = 2147483648}
Link: http://lkml.kernel.org/r/20180118210159.17223-1-imxikangjie@gmail.com
Fixes: 15f4eae70d ("x86: Move thread_info into task_struct")
Signed-off-by: Xi Kangjie <imxikangjie@gmail.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kbuild conventionally uses $(shell cd ... && /bin/pwd) idiom to get
the absolute path of the directory because GNU Make 3.80, the minimal
supported version at that time, did not support $(abspath ...) or
$(realpath ...).
Commit 37d69ee308 ("docs: bump minimal GNU Make version to 3.81")
dropped the GNU Make 3.80 support, so we are now allowed to use those
make-builtin helpers.
This conversion will provide better portability without relying on
the pwd command or its location /bin/pwd.
I am intentionally using $(realpath ...) instead $(abspath ...) in
some places. The difference between the two is $(realpath ...)
returns an empty string if the given path does not exist. It is
convenient in places where we need to error-out if the makefile fails
to create an output directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Use errors=replace because it is never desirable for lx-dmesg to fail on
string decoding errors, not even if the log buffer is corrupt and we
show incorrect info.
The kernel will sometimes print utf8, for example the copyright symbol
from jffs2. In order to make this work specify 'utf8' everywhere
because python2 otherwise defaults to 'ascii'.
In theory the second errors='replace' is not be required because
everything that can be decoded as utf8 should also be encodable back to
utf8. But it's better to be extra safe here. It's worth noting that
this is definitely not true for encoding='ascii', unknown characters are
replaced with U+FFFD REPLACEMENT CHARACTER and they fail to encode back
to ascii.
Link: http://lkml.kernel.org/r/acee067f3345954ed41efb77b80eebdc038619c6.1498481469.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kieran@ksquared.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In some cases it is possible for the str() conversion here to throw
encoding errors because log_buf might not point to valid ascii. For
example:
(gdb) python print str(gdb.parse_and_eval("log_buf"))
Traceback (most recent call last):
File "<string>", line 1, in <module>
UnicodeEncodeError: 'ascii' codec can't encode character u'\u0303' in
position 24: ordinal not in range(128)
Avoid this by explicitly casting to (void *) inside the gdb expression.
Link: http://lkml.kernel.org/r/ba6f85dbb02ca980ebd0e2399b0649423399b565.1498481469.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kieran Bingham <kieran@ksquared.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Douglas Anderson