- Add powerpc qspinlock implementation optimised for large system scalability and
paravirt. See the merge message for more details.
- Enable objtool to be built on powerpc to generate mcount locations.
- Use a temporary mm for code patching with the Radix MMU, so the writable mapping is
restricted to the patching CPU.
- Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI.
- Sanitise user registers on interrupt entry on 64-bit Book3S.
- Many other small features and fixes.
Thanks to: Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen
Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin
Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven,
Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain,
Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao,
Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure,
Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang
Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, Wolfram Sang.
-----BEGIN PGP SIGNATURE-----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=7k3p
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add powerpc qspinlock implementation optimised for large system
scalability and paravirt. See the merge message for more details
- Enable objtool to be built on powerpc to generate mcount locations
- Use a temporary mm for code patching with the Radix MMU, so the
writable mapping is restricted to the patching CPU
- Add an option to build the 64-bit big-endian kernel with the ELFv2
ABI
- Sanitise user registers on interrupt entry on 64-bit Book3S
- Many other small features and fixes
Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.
* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
powerpc/code-patching: Fix oops with DEBUG_VM enabled
powerpc/qspinlock: Fix 32-bit build
powerpc/prom: Fix 32-bit build
powerpc/rtas: mandate RTAS syscall filtering
powerpc/rtas: define pr_fmt and convert printk call sites
powerpc/rtas: clean up includes
powerpc/rtas: clean up rtas_error_log_max initialization
powerpc/pseries/eeh: use correct API for error log size
powerpc/rtas: avoid scheduling in rtas_os_term()
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtasd: use correct OF API for event scan rate
powerpc/rtas: document rtas_call()
powerpc/pseries: unregister VPA when hot unplugging a CPU
powerpc/pseries: reset the RCU watchdogs after a LPM
powerpc: Take in account addition CPU node when building kexec FDT
powerpc: export the CPU node count
powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
powerpc/dts/fsl: Fix pca954x i2c-mux node names
cxl: Remove unnecessary cxl_pci_window_alignment()
selftests/powerpc: Fix resource leaks
...
- Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when the architecture
does not make use of irq domains instead of returning 0, which is pretty
limiting.
- Check for the presence of an irq domain when validating the MSI iterator,
as s390/powerpc won't have one.
- Fix powerpc's MSI backends which fail to clear the descriptor's IRQ field
on teardown, leading to a splat and leaked descriptors.
-----BEGIN PGP SIGNATURE-----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=yuHx
-----END PGP SIGNATURE-----
Merge tag 'msi-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms
Pull MSI fixes from Marc Zyngier:
"Thomas tasked me with sending out a few urgent fixes after the giant
MSI rework that landed in 6.2, as both s390 and powerpc ended-up
suffering from it (they do not use the full core code infrastructure,
leading to these previously undetected issues):
- Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when the
architecture does not make use of irq domains instead of returning
0, which is pretty limiting.
- Check for the presence of an irq domain when validating the MSI
iterator, as s390/powerpc won't have one.
- Fix powerpc's MSI backends which fail to clear the descriptor's IRQ
field on teardown, leading to a splat and leaked descriptors"
* tag 'msi-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms:
powerpc/msi: Fix deassociation of MSI descriptors
genirq/msi: Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when no domain is present
genirq/msi: Check for the presence of an irq domain when validating msi_ctrl
Since 2f2940d168 ("genirq/msi: Remove filter from
msi_free_descs_free_range()"), the core MSI code relies on the
msi_desc->irq field to have been cleared before the descriptor
can be freed, as it indicates that there is no association with
a device anymore.
The irq domain code provides this guarantee, and so does s390,
which is one of the two architectures not using irq domains for
MSIs.
Powerpc, however, is missing this particular requirements,
leading in a splat and leaked MSI descriptors.
Adding the now required irq reset to the handful of powerpc backends
that implement MSIs fixes that particular problem.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/70dab88e-6119-0c12-7c6a-61bcbe239f66@roeck-us.net
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
rtas-error-log-max is not the name of an RTAS function, so rtas_token()
is not the appropriate API for retrieving its value. We already have
rtas_get_error_log_max() which returns a sensible value if the property
is absent for any reason, so use that instead.
Fixes: 8d633291b4 ("powerpc/eeh: pseries platform EEH error log retrieval")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop no-longer possible error handling as noticed by ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-6-nathanl@linux.ibm.com
The VPA should unregister when offlining a CPU. Otherwise there could be
a short window where 2 CPUs could share the same VPA.
This happens because the hypervisor is still keeping the VPA attached to
the vCPU even if it became offline.
Here is a potential situation:
1. remove proc A,
2. add proc B. If proc B gets proc A's place in cpu_present_mask, then
it registers proc A's VPAs.
3. If proc B is then re-added to the LP, its threads are sharing VPAs
with proc A briefly as they come online.
As the hypervisor may check for the VPA's yield_count field oddity, it
may detect an unexpected value and kill the LPAR.
Suggested-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: s/cpu_present_map/cpu_present_mask/ in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114160150.13554-1-ldufour@linux.ibm.com
The RCU watchdog timer should be reset when restarting the CPU after a
Live Partition Mobility operation.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Combine comments into a single comment block]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221125173204.15329-1-ldufour@linux.ibm.com
If platform_device_add() is not called or failed, it can not call
platform_device_del() to clean up memory, it should call
platform_device_put() in error case.
Fixes: 26f6cb9993 ("[POWERPC] fsl_soc: add support for fsl_spi")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221029111626.429971-1-yangyingliang@huawei.com
This call may use the min size stack frame. The scratch space used is
in the caller's parameter area frame, not this function's frame.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-6-npiggin@gmail.com
Provide an option to build big-endian kernels using the ELFv2 ABI. This
works on GCC only for now. Clang is rumored to support this, but core
build files need updating first, at least.
This gives big-endian kernels useful advantages of the ELFv2 ABI, e.g.,
less stack usage, -mprofile-kernel support, better compatibility with
eBPF tools.
BE+ELFv2 is not officially supported by the GNU toolchain, but it works
fine in testing and has been used by some userspace for some time (e.g.,
Void Linux).
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041539.1742489-5-npiggin@gmail.com
ps3_system_bus_type is only used inside of system-bus.c, so remove
the external declaration and the very outdated comment next to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221122072225.423432-1-hch@lst.de
In commit ff62b8e658 ("driver core: make struct class.devnode() take a
const *") the ->devnode callback changed the pointer to be const, but a
few instances of PowerPC drivers were not caught for some reason.
Fix this up by changing the pointers to be const.
Fixes: ff62b8e658 ("driver core: make struct class.devnode() take a const *")
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linuxppc-dev@lists.ozlabs.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20221128173539.3112234-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even though plpks_read_var() is currently called to read variables
owned by different consumers, it internally supports only OS consumer.
Fix plpks_read_var() to handle different consumers correctly.
Fixes: 2454a7af0f ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-7-nayna@linux.ibm.com
Replace kmalloc with kzalloc in construct_auth() function to default
initialize structure with zeroes.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-6-nayna@linux.ibm.com
Logging H_CALL return codes in PLPKS driver are easy to confuse with
Linux error codes.
Let the caller of the function log the converted linux error code.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-5-nayna@linux.ibm.com
Some commands for eg. "cat" might continue to retry on encountering
EINTR. This is not expected for original error code H_ABORTED.
Map H_ABORTED to more relevant Linux error code EIO.
Fixes: 2454a7af0f ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-4-nayna@linux.ibm.com
PAPR Spec defines H_P1 actually as H_PARAMETER and maps H_ABORTED to
a different numerical value.
Fix the error codes as per PAPR Specification.
Fixes: 2454a7af0f ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-3-nayna@linux.ibm.com
OS_VAR_LINUX enum in PLPKS driver should be 0x02 instead of 0x01.
Fixes: 2454a7af0f ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-2-nayna@linux.ibm.com
1. ppc_override_l2cr and ppc_override_l2cr_value are only used in
l2cr_init() function, remove them and used *l2cr directly.
2. has_l2cache is not used outside of the file, so mark it static and
do not initialise statics to 0.
Fixes the following warnings:
arch/powerpc/platforms/powermac/setup.c:73:5: warning: symbol
'ppc_override_l2cr' was not declared. Should it be static?
arch/powerpc/platforms/powermac/setup.c:74:5: warning: symbol
'ppc_override_l2cr_value' was not declared. Should it be static?
arch/powerpc/platforms/powermac/setup.c:75:5: warning: symbol
'has_l2cache' was not declared. Should it be static?
Signed-off-by: Chen Lifu <chenlifu@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Unwrap printk string]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221103070122.340773-1-chenlifu@huawei.com
Fixes the following W=1 kernel build warning(s):
arch/powerpc/platforms/pseries/eeh_pseries.c:163: warning: Function parameter or member 'config_addr' not described in 'pseries_eeh_phb_reset'
arch/powerpc/platforms/pseries/eeh_pseries.c:163: warning: Excess function parameter 'config_adddr' description in 'pseries_eeh_phb_reset'
arch/powerpc/platforms/pseries/eeh_pseries.c:198: warning: Function parameter or member 'config_addr' not described in 'pseries_eeh_phb_configure_bridge'
arch/powerpc/platforms/pseries/eeh_pseries.c:198: warning: Excess function parameter 'config_adddr' description in 'pseries_eeh_phb_configure_bridge'
Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221031063706.2770-1-liubo03@inspur.com
This patch converts the driver to newer gpiod API, and away from
OF-specific legacy gpio API that we want to stop using.
While at it, let's address a few more issues:
- switch to using dev_info()/pr_info() and friends
- cancel work when unbinding the driver
Note that the original code handled halt GPIO polarity incorrectly:
in halt callback, when line polarity is "low" it would set trigger to
"1" and drive halt line high, which is counter to the annotation.
gpiod API will drive such line low. However I do not see any DTSes
in mainline that have a DT node with "sgy,gpio-halt" compatible.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YzNNznewTyCJiGFz@google.com
This switches PIKA Warp away from legacy gpio API and to newer gpiod
API, so that we can eventually deprecate the former.
Because LEDs are normally driven by leds-gpio driver, but the
platform code also wants to access the LEDs during thermal shutdown,
and gpiod API does not allow locating GPIO without requesting it,
the platform code is now responsible for locating GPIOs through device
tree and requesting them. It then constructs platform data for
leds-gpio platform device and registers it. This allows platform
code to retain access to LED GPIO descriptors and use them when needed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YzKSLcrYmV5kjyeX@google.com
ISA v2.06 (POWER7 and up) as well as e6500 support lbarx and lharx.
Add a compile option that allows code to use it, and add support in
cmpxchg and xchg 8 and 16 bit values without shifting and masking.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220909052312.63916-1-npiggin@gmail.com
Fix multiple kernel-doc warnings in mpc52xx_lpbfifo.c:
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c:377: warning: expecting prototype for mpc52xx_lpbfifo_bcom_poll(). Prototype was for mpc52xx_lpbfifo_poll() instead
mpc52xx_lpbfifo.c:221: warning: No description found for return value of 'mpc52xx_lpbfifo_irq'
mpc52xx_lpbfifo.c:327: warning: No description found for return value of 'mpc52xx_lpbfifo_bcom_irq'
mpc52xx_lpbfifo.c:398: warning: No description found for return value of 'mpc52xx_lpbfifo_submit'
mpc52xx_lpbfifo.c:64: warning: Function parameter or member 'req' not described in 'mpc52xx_lpbfifo_kick'
mpc52xx_lpbfifo.c:220: warning: contents before sections
mpc52xx_lpbfifo.c:223: warning: Function parameter or member 'irq' not described in 'mpc52xx_lpbfifo_irq'
mpc52xx_lpbfifo.c:223: warning: Function parameter or member 'dev_id' not described in 'mpc52xx_lpbfifo_irq'
mpc52xx_lpbfifo.c:328: warning: contents before sections
mpc52xx_lpbfifo.c:331: warning: Function parameter or member 'irq' not described in 'mpc52xx_lpbfifo_bcom_irq'
mpc52xx_lpbfifo.c:331: warning: Function parameter or member 'dev_id' not described in 'mpc52xx_lpbfifo_bcom_irq'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221124061918.1967-1-rdunlap@infradead.org
The error handling path of mpc52xx_lpbfifo_probe() has a request_irq()
that is not balanced by a corresponding free_irq().
Add the missing call, as already done in the remove function.
Fixes: 3c9059d79f ("powerpc/5200: add LocalPlus bus FIFO device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dec1496d46ccd5311d0f6e9f9ca4238be11bf6a6.1643440531.git.christophe.jaillet@wanadoo.fr
Fix several annotations in assembly files on PPC32.
[Sathvika Vasireddy: Changed subject line and removed Kconfig change to
enable objtool, as it is a part of "objtool/powerpc: Enable objtool to
be built on ppc" patch in this series.]
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-7-sv@linux.ibm.com
Use the new msi_post_free() callback which is invoked after the interrupts
have been freed to tell the hypervisor about the shutdown.
This allows to remove the exposure of __msi_domain_free_irqs().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.120489922@linutronix.de
The hypervisor assigns VAS (Virtual Accelerator Switchboard)
windows depends on cores configured in LPAR. The kernel uses
OF reconfig notifier to reconfig VAS windows for DLPAR CPU event.
In the case of shared CPU mode partition, the hypervisor assigns
VAS windows depends on CPU entitled capacity, not based on vcpus.
When the user changes CPU entitled capacity for the partition,
drmgr uses /proc/ppc64/lparcfg interface to notify the kernel.
This patch adds the following changes to update VAS resources
for shared mode:
- Call vas reconfig windows from lparcfg_write()
- Ignore reconfig changes in the VAS notifier
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Rework error handling, report any errors as EIO]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/efa9c16e4a78dda4567a16f13dabfd73cb4674a2.camel@linux.ibm.com
irq_default_primary_handler() can be used only with IRQF_ONESHOT
flag, but the flag disables IRQ before executing the thread handler
and enables it after the interrupt is handled. But this IRQ disable
sets the VAS IRQ OFF state in the hypervisor. In case if NX faults
during this window, the hypervisor will not deliver the fault
interrupt to the partition and the user space may wait continuously
for the CSB update. So use VAS specific IRQ handler instead of
calling the default primary handler.
Increment pending_faults counter in IRQ handler and the bottom
thread handler will process all faults based on this counter.
In case if the another interrupt is received while the thread is
running, it will be processed using this counter. The synchronization
of top and bottom handlers will be done with IRQTF_RUNTHREAD flag
and will re-enter to bottom half if this flag is set.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aaad8813b4762a6753cfcd0b605a7574a5192ec7.camel@linux.ibm.com
The recently moved dtl code must be compiled-in if
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y even if CONFIG_DTL=n.
Fixes: 6ba5aa541a ("powerpc/pseries: Move dtl scanning and steal time accounting to pseries platform")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221013073131.1485742-1-npiggin@gmail.com
- Remove our now never-true definitions for pgd_huge() and p4d_leaf().
- Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.
- Add support for syscall wrappers.
- Add support for KFENCE on 64-bit.
- Update 64-bit HV KVM to use the new guest state entry/exit accounting API.
- Support execute-only memory when using the Radix MMU (P9 or later).
- Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.
- Updates to our linker script to move more data into read-only sections.
- Allow the VDSO to be randomised on 32-bit.
- Many other small features and fixes.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Christophe
Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas, Gaosheng Cui, Gustavo A. R. Silva,
Haren Myneni, Hari Bathini, Jilin Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Rohan McLure,
Russell Currey, Sachin Sant, Segher Boessenkool, Shrikanth Hegde, Tyrel Datwyler, Wolfram
Sang, ye xingchen, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----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=TFBA
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Remove our now never-true definitions for pgd_huge() and p4d_leaf().
- Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.
- Add support for syscall wrappers.
- Add support for KFENCE on 64-bit.
- Update 64-bit HV KVM to use the new guest state entry/exit accounting
API.
- Support execute-only memory when using the Radix MMU (P9 or later).
- Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.
- Updates to our linker script to move more data into read-only
sections.
- Allow the VDSO to be randomised on 32-bit.
- Many other small features and fixes.
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas,
Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin
Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent
Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali
Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool,
Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng
Yongjun.
* tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
KVM: PPC: Book3S HV: Fix stack frame regs marker
powerpc: Don't add __powerpc_ prefix to syscall entry points
powerpc/64s/interrupt: Fix stack frame regs marker
powerpc/64: Fix msr_check_and_set/clear MSR[EE] race
powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN
powerpc/pseries: Add firmware details to the hardware description
powerpc/powernv: Add opal details to the hardware description
powerpc: Add device-tree model to the hardware description
powerpc/64: Add logical PVR to the hardware description
powerpc: Add PVR & CPU name to hardware description
powerpc: Add hardware description string
powerpc/configs: Enable PPC_UV in powernv_defconfig
powerpc/configs: Update config files for removed/renamed symbols
powerpc/mm: Fix UBSAN warning reported on hugetlb
powerpc/mm: Always update max/min_low_pfn in mem_topology_setup()
powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range
powerpc: Drops STABS_DEBUG from linker scripts
powerpc/64s: Remove lost/old comment
powerpc/64s: Remove old STAB comment
powerpc: remove orphan systbl_chk.sh
...
Add firmware version details to the hardware description, which is
printed at boot and in case of an oops.
Use /hypervisor if we find it, though currently it only exists if we're
running under qemu.
Look for "ibm,powervm-partition" which is specified in PAPR+ v2.11 and
tells us we're running under PowerVM.
Failing that look for "ibm,fw-net-version" which is seen on PowerVM
going back to at least Power6.
eg: Hardware name: ... of:IBM,FW860.42 (SV860_138) hv:phyp
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930082709.55830-6-mpe@ellerman.id.au
Generally the hypervisor decides to allocate a window on different
VAS instances. But if user space wishes to allocate on the current VAS
instance where the process is executing, the kernel has to pass
associativity domain IDs to allocate VAS window HCALL.
To determine the associativity domain IDs for the current CPU,
smp_processor_id() is passed to node associativity HCALL which may
return H_P2 (-55) error during DLPAR CPU event. This is because Linux
CPU numbers (smp_processor_id()) are not the same as the hypervisor's
view of CPU numbers.
Fix the issue by passing hard_smp_processor_id() with
VPHN_FLAG_VCPU flag (PAPR 14.11.6.1 H_HOME_NODE_ASSOCIATIVITY).
Fixes: b22f2d88e4 ("powerpc/pseries/vas: Integrate API with open/close windows")
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Update change log to mention Linux vs HV CPU numbers]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/55380253ea0c11341824cd4c0fc6bbcfc5752689.camel@linux.ibm.com
Return the value opal_npu_spa_clear_cache() directly instead of storing
it in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220906072006.337099-1-ye.xingchen@zte.com.cn
Return the value vas_register_coproc_api() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220825072657.229168-1-ye.xingchen@zte.com.cn
The /proc/powerpc/ofdt interface allows the root user to freely alter
the in-kernel device tree, enabling arbitrary physical address writes
via drivers that could bind to malicious device nodes, thus making it
possible to disable lockdown.
Historically this interface has been used on the pseries platform to
facilitate the runtime addition and removal of processor, memory, and
device resources (aka Dynamic Logical Partitioning or DLPAR). Years
ago, the processor and memory use cases were migrated to designs that
happen to be lockdown-friendly: device tree updates are communicated
directly to the kernel from firmware without passing through untrusted
user space. I/O device DLPAR via the "drmgr" command in powerpc-utils
remains the sole legitimate user of /proc/powerpc/ofdt, but it is
already broken in lockdown since it uses /dev/mem to allocate argument
buffers for the rtas syscall. So only illegitimate uses of the
interface should see a behavior change when running on a locked down
kernel.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926131643.146502-2-nathanl@linux.ibm.com
A later change stops the kernel using r2 and loads it with a poison
value. Provide a PACATOC loading abstraction which can hide this
detail.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-5-npiggin@gmail.com
When the migration is initiated, the hypervisor changes VAS
mappings as part of pre-migration event. Then the OS gets the
migration event which closes all VAS windows before the migration
starts. NX generates continuous faults until windows are closed
and the user space can not differentiate these NX faults coming
from the actual migration. So to reduce this time window, close
VAS windows first in pseries_migrate_partition().
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d8efade91dda831c9ed4abb226dab627da594c5f.camel@linux.ibm.com
Update the 64s GENERIC_CPU option. POWER4 support has been dropped, so
make that clear in the option name. The POWER5_CPU option is dropped
because it's uncommon, and GENERIC_CPU covers it.
-mtune= before power8 is dropped because the minimum gcc version
supports power8, and tuning is made consistent between big and little
endian.
A 970 option is added for PowerPC 970 / G5 because they still have a
user base, and -mtune=power8 does not generate good code for the 970.
This also updates the ISA versions document to add Power4/Power4+
because I didn't realise Power4+ used 2.01.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921014103.587954-2-npiggin@gmail.com
Cause syscall handlers to be typed as follows when called indirectly
throughout the kernel. This is to allow for better type checking.
typedef long (*syscall_fn)(unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long);
Since both 32 and 64-bit abis allow for at least the first six
machine-word length parameters to a function to be passed by registers,
even handlers which admit fewer than six parameters may be viewed as
having the above type.
Coercing syscalls to syscall_fn requires a cast to void* to avoid
-Wcast-function-type.
Fixup comparisons in VDSO to avoid pointer-integer comparison. Introduce
explicit cast on systems with SPUs.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-19-rmclure@linux.ibm.com
e500 idle setup is a bit messy.
e500_idle() is used for PPC32 while book3e_idle() is used for PPC64.
As they are mutually exclusive, call them all e500_idle().
Use CONFIG_MPC_85xx instead of PPC32 + E500 in Makefile and rename
idle_e500.c to idle_85xx.c .
Rename idle_book3e.c to idle_64e.c and remove #ifdef PPC64 in
as it's only built on PPC64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8039301334e948974c85ec5ef2db37751075185b.1663606876.git.christophe.leroy@csgroup.eu
Linus Torvalds