CS_ETM_TRACE_ON packet itself can give the info that there have a
discontinuity in the trace, this patch is to add branch sample for
CS_ETM_TRACE_ON packet if it is inserted in the middle of CS_ETM_RANGE
packets; as result we can have hint for the trace discontinuity.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-7-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If one CS_ETM_TRACE_ON packet is inserted, we miss to generate branch
sample for the previous CS_ETM_RANGE packet.
This patch is to generate branch sample when receiving a CS_ETM_TRACE_ON
packet, so this can save complete info for the previous CS_ETM_RANGE
packet just before CS_ETM_TRACE_ON packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-6-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For CS_ETM_TRACE_ON packet, its fields 'packet->start_addr' and
'packet->end_addr' equal to 0xdeadbeefdeadbeefUL which are emitted in
the decoder layer as dummy value, but the dummy value is pointless for
branch sample when we use 'perf script' command to check program flow.
This patch is a preparation to support CS_ETM_TRACE_ON packet for branch
sample, it converts the dummy address value to zero for more readable;
this is accomplished by cs_etm__last_executed_instr() and
cs_etm__first_executed_instr(). The later one is a new function
introduced by this patch.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-5-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Usually the start tracing packet is a CS_ETM_TRACE_ON packet, this
packet is passed to cs_etm__flush(); cs_etm__flush() will check the
condition 'prev_packet->sample_type == CS_ETM_RANGE' but 'prev_packet'
is allocated by zalloc() so 'prev_packet->sample_type' is zero in
initialization and this condition is false. So cs_etm__flush() will
directly bail out without handling the start tracing packet.
This patch is to introduce a new sample type CS_ETM_EMPTY, which is used
to indicate the packet is an empty packet. cs_etm__flush() will swap
packets when it finds the previous packet is empty, so this can record
the start tracing packet into 'etmq->prev_packet'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-4-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tool build and install is controlled via a Makefile. The
'install' rule creates directories and copies files. Among them are
header files installed in /usr/lib/include/perf/bpf/.
However all listed examples are installing its header files in
/usr/lib/<tool-name>/...[/include]/header.h
and not in
/usr/lib/include/<tool-name>/.../header.h.
Background information:
Building the Fedora 28 glibc RPM on s390x and s390 fails on s390 (gcc
-m31) as gcc is not able to find header-files like stdbool.h.
In the glibc.spec file, you can see that glibc is configured with
"--with-headers". In this case, first -nostdinc is added to the CFLAGS
and then further include paths are added via -isystem. One of those
paths should contain header files like stdbool.h.
In order to get this path, gcc is invoked with:
- on Fedora 28 (with 4.18 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/../../../../lib/include
=> If perf is installed, this is: /usr/lib/include
On my machine this directory is only containing the directory "perf".
If perf is not installed gcc returns: /usr/lib/gcc/s390x-redhat-linux/8/include
- on Ubuntu 18.04 (with 4.15 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
=> gcc returns the correct path even if perf is installed.
In each case, the introduction of the subdirectory /usr/lib/include
leads to the regression that one can not build the glibc RPM for s390
anymore as gcc can not find headers like stdbool.h.
To remedy this install bpf.h to /usr/lib/perf/include/bpf/bpf.h
Output before using the command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/include/perf/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Output after using command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/perf/include/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Committer testing:
While the above 'perf test -F 40' (or 'perf test bpf') will allow us
to see that the correct path is now added via -I, to actually test this
we better try to use a bpf script that includes files in the changed
directory.
We have the files that now reside in /root/lib/perf/examples/bpf/ to do
just that:
# tail -8 /root/lib/perf/examples/bpf/5sec.c
#include <bpf.h>
int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec)
{
return sec == 5;
}
license(GPL);
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 4
0.333 (4000.086 ms): sleep/9248 nanosleep(rqtp: 0x7ffc155f3300) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5
0.287 ( ): sleep/9659 nanosleep(rqtp: 0x7ffeafe38200) ...
0.290 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
0.287 (5000.059 ms): sleep/9659 ... [continued]: nanosleep()) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 6
0.247 (5999.951 ms): sleep/10068 nanosleep(rqtp: 0x7fff2086d900) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5.987
0.293 ( ): sleep/10489 nanosleep(rqtp: 0x7ffdd4fc10e0) ...
0.296 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
0.293 (5986.912 ms): sleep/10489 ... [continued]: nanosleep()) = 0
#
Suggested-by: Stefan Liebler <stli@linux.ibm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: 1b16fffa38 ("perf llvm-utils: Add bpf include path to clang command line")
Link: http://lkml.kernel.org/r/20180731073254.91090-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf c2c' scans read/write accesses and tries to find false sharing
cases, so when the events it wants were not asked for or ended up not
taking place, we get no histograms.
So do not try to display entry details if there's not any. Currently
this ends up in crash:
$ perf c2c report # then press 'd'
perf: Segmentation fault
$
Committer testing:
Before:
Record a perf.data file without events of interest to 'perf c2c report',
then call it and press 'd':
# perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (6 samples) ]
# perf c2c report
perf: Segmentation fault
-------- backtrace --------
perf[0x5b1d2a]
/lib64/libc.so.6(+0x346df)[0x7fcb566e36df]
perf[0x46fcae]
perf[0x4a9f1e]
perf[0x4aa220]
perf(main+0x301)[0x42c561]
/lib64/libc.so.6(__libc_start_main+0xe9)[0x7fcb566cff29]
perf(_start+0x29)[0x42c999]
#
After the patch the segfault doesn't take place, a follow up patch to
tell the user why nothing changes when 'd' is pressed would be good.
Reported-by: rodia@autistici.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f1c5fd4d0b ("perf c2c report: Add TUI cacheline browser")
Link: http://lkml.kernel.org/r/20180724062008.26126-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recently, the subtest numbering was changed to start from 1. While it
is fine for displaying results, this should not be the case when the
subtests are actually invoked.
Typically, the subtests are stored in zero-indexed arrays and invoked
based on the index passed to the main test function. Since the index
now starts from 1, the second subtest in the array (index 1) gets
invoked instead of the first (index 0). This applies to all of the
following subtests but for the last one, the subtest always fails
because it does not meet the boundary condition of the subtest index
being lesser than the number of subtests.
This can be observed on powerpc64 and x86_64 systems running Fedora 28
as shown below.
Before:
# perf test "builtin clang support"
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : FAILED!
# perf test "LLVM search and compile"
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : FAILED!
# perf test "BPF filter"
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : FAILED!
After:
# perf test "builtin clang support"
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : Ok
# perf test "LLVM search and compile"
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : Ok
# perf test "BPF filter"
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Fixes: 9ef0112442 ("perf test: Fix subtest number when showing results")
Link: http://lkml.kernel.org/r/20180726171733.33208-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For instance:
$ trace -e socket* ssh sandy
0.000 ( 0.031 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
0.052 ( 0.015 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.568 ( 0.020 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.603 ( 0.012 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.699 ( 0.014 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.724 ( 0.012 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.804 ( 0.020 ms): ssh/19919 socket(family: INET, type: STREAM, protocol: TCP ) = 3
17.549 ( 0.098 ms): ssh/19919 socket(family: LOCAL, type: STREAM ) = 4
acme@sandy's password:
Just like with other syscall args, the common bits are supressed so that
the output is more compact, i.e. we use "TCP" instead of "IPPROTO_TCP",
but we can make this show the original constant names if we like it by
using some command line knob or ~/.perfconfig "[trace]" section
variable.
Also needed is to make perf's event parser accept things like:
$ perf trace -e socket*/protocol=TCP/
By using both the tracefs event 'format' files and these tables built
from the kernel sources.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-l39jz1vnyda0b6jsufuc8bz7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be wired to 'perf trace' in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2i9vkvm1ik8yu4hgjmxhsyjv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We may have string tables where not all slots have values, in those
cases its better to print the numeric value, for instance:
In the table below we would show "protocol: (null)" for
socket_ipproto[3]
Where it would be better to show "protocol: 3".
$ tools/perf/trace/beauty/socket_ipproto.sh
static const char *socket_ipproto[] = {
[0] = "IP",
[103] = "PIM",
[108] = "COMP",
[12] = "PUP",
[132] = "SCTP",
[136] = "UDPLITE",
[137] = "MPLS",
[17] = "UDP",
[1] = "ICMP",
[22] = "IDP",
[255] = "RAW",
[29] = "TP",
[2] = "IGMP",
[33] = "DCCP",
[41] = "IPV6",
[46] = "RSVP",
[47] = "GRE",
[4] = "IPIP",
[50] = "ESP",
[51] = "AH",
[6] = "TCP",
[8] = "EGP",
[92] = "MTP",
[94] = "BEETPH",
[98] = "ENCAP",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-7djfak94eb3b9ltr79cpn3ti@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll use tools/include copy of linux/in.h to generate a table to be
used by tools, initially by the 'socket' and 'socketpair' beautifiers in
'perf trace', but that could also be used to translate from a string
constant to the integer value to be used in a eBPF or tracefs tracepoint
filter.
When used without any args it produces:
$ tools/perf/trace/beauty/socket_ipproto.sh
static const char *socket_ipproto[] = {
[0] = "IP",
[103] = "PIM",
[108] = "COMP",
[12] = "PUP",
[132] = "SCTP",
[136] = "UDPLITE",
[137] = "MPLS",
[17] = "UDP",
[1] = "ICMP",
[22] = "IDP",
[255] = "RAW",
[29] = "TP",
[2] = "IGMP",
[33] = "DCCP",
[41] = "IPV6",
[46] = "RSVP",
[47] = "GRE",
[4] = "IPIP",
[50] = "ESP",
[51] = "AH",
[6] = "TCP",
[8] = "EGP",
[92] = "MTP",
[94] = "BEETPH",
[98] = "ENCAP",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-v9rafqh3qn6b9kp9vfvj9f8s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it to create tables for the 'protocol' argument to the
socket syscall when the 'family' arg is one of AF_INET or AF_INET6.
Add it to check_headers.sh so that when a new protocol gets added we get
a notification during the build process.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2amnveu1ns4emjn70xuavpje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'umask' event parameter is unsupported on some architectures like
powerpc64.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# perf test "Parse event definition strings" -v
6: Parse event definition strings :
--- start ---
test child forked, pid 45915
...
running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp'Invalid event/parameter 'umask'
Invalid event/parameter 'umask'
failed to parse event 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp', err 1, str 'unknown term'
event syntax error: '..,event=0x2,umask=0x3/ukp'
\___ unknown term
valid terms: event,mark,pmc,cache_sel,pmcxsel,unit,thresh_stop,thresh_start,combine,thresh_sel,thresh_cmp,sample_mode,config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size,no-inherit,inherit,max-stack,no-overwrite,overwrite,driver-config
mem_access -> cpu/event=0x10401e0/
running test 0 'config=10,config1,config2=3,umask=1'
test child finished with 1
---- end ----
Parse event definition strings: FAILED!
Committer testing:
After applying the patch these test passes and in verbose mode we get:
# perf test -v "event definition"
6: Parse event definition strings:
--- start ---
test child forked, pid 11061
running test 0 'syscalls:sys_enter_openat'Using CPUID GenuineIntel-6-9E
<SNIP>
running test 53 'cycles/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks'/Duk'
running test 0 'cpu/config=10,config1,config2=3,period=1000/u'
running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u'
running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/'
running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp'
<SNIP>
test child finished with 0
---- end ----
Parse event definition strings: Ok
#
Suggested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: 06dc5bf21f ("perf tests: Check that complex event name is parsed correctly")
Link: http://lkml.kernel.org/r/20180726105502.31670-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' will error out if both --delay and LBR are applied.
For example:
# perf record -D 1000 -a -e cycles -j any -- sleep 2
Error:
dummy:HG: PMU Hardware doesn't support sampling/overflow-interrupts.
Try 'perf stat'
#
A dummy event is added implicitly for initial delay, which has the same
configurations as real sampling events. The dummy event is a software
event. If LBR is configured, perf must error out.
The dummy event will only be used to track PERF_RECORD_MMAP while perf
waits for the initial delay to enable the real events. The BRANCH_STACK
bit can be safely cleared for the dummy event.
After applying the patch:
# perf record -D 1000 -a -e cycles -j any -- sleep 2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.054 MB perf.data (828 samples) ]
#
Reported-by: Sunil K Pandey <sunil.k.pandey@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1531145722-16404-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test to use get_socket_cookie() from BPF programs of types
BPF_PROG_TYPE_SOCK_OPS and BPF_PROG_TYPE_CGROUP_SOCK_ADDR.
The test attaches two programs to cgroup, runs TCP server and client in
the cgroup and checks that two operations are done properly on client
socket when user calls connect(2):
1. In BPF_CGROUP_INET6_CONNECT socket cookie is used as the key to write
new value in a map for client socket.
2. In BPF_CGROUP_SOCK_OPS (BPF_SOCK_OPS_TCP_CONNECT_CB callback) the
value written in "1." is found by socket cookie, since it's the same
socket, and updated.
Finally the test verifies the value in the map.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add missing helper to bpf_helpers.h that is used in tests and samples.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sync bpf_get_socket_cookie() related bpf UAPI changes to tools/.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and
x86's memcpy_64.s (used in 'perf bench mem'), silencing the
respective warnings during the perf tools build.
- Fix the build on the alpine:edge distro.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=r5Gg
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.18-20180730' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and
x86's memcpy_64.s (used in 'perf bench mem'), silencing the
respective warnings during the perf tools build.
- Fix the build on the alpine:edge distro.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
"Several smallish fixes, I don't think any of this requires another -rc
but I'll leave that up to you:
1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric
Dumazet.
2) Route leak in xfrm_lookup_route(), from Tommi Rantala.
3) Premature poll() returns in AF_XDP, from Björn Töpel.
4) devlink leak in netdevsim, from Jakub Kicinski.
5) Don't BUG_ON in fib_compute_spec_dst, the condition can
legitimately happen. From Lorenzo Bianconi.
6) Fix some spectre v1 gadgets in generic socket code, from Jeremy
Cline.
7) Don't allow user to bind to out of range multicast groups, from
Dmitry Safonov with a follow-up by Dmitry Safonov.
8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
netlink: Don't shift with UB on nlk->ngroups
net/ipv6: fix metrics leak
xen-netfront: wait xenbus state change when load module manually
can: ems_usb: Fix memory leak on ems_usb_disconnect()
openvswitch: meter: Fix setting meter id for new entries
netlink: Do not subscribe to non-existent groups
NET: stmmac: align DMA stuff to largest cache line length
tcp_bbr: fix bw probing to raise in-flight data for very small BDPs
net: socket: Fix potential spectre v1 gadget in sock_is_registered
net: socket: fix potential spectre v1 gadget in socketcall
net: mdio-mux: bcm-iproc: fix wrong getter and setter pair
ipv4: remove BUG_ON() from fib_compute_spec_dst
enic: handle mtu change for vf properly
net: lan78xx: fix rx handling before first packet is send
nfp: flower: fix port metadata conversion bug
bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog()
bpf: fix bpf_skb_load_bytes_relative pkt length check
perf build: Build error in libbpf missing initialization
net: ena: Fix use of uninitialized DMA address bits field
bpf: btf: Use exact btf value_size match in map_check_btf()
...
Commit 531b014e7a ("tools: bpf: make use of reallocarray") causes
a compiler error when building the perf tool in the linux-next tree.
Compile file tools/lib/bpf/libbpf.c on a FEDORA 28 installation with
gcc compiler version: gcc (GCC) 8.0.1 20180324 (Red Hat 8.0.1-0.20)
shows this error message:
[root@p23lp27] # make V=1 EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2"
[...]
make -f /home6/tmricht/linux-next/tools/build/Makefile.build
dir=./util/scripting-engines obj=libperf
libbpf.c: In function ‘bpf_object__elf_collect’:
libbpf.c:811:15: error: ignoring return value of ‘strerror_r’,
declared with attribute warn_unused_result [-Werror=unused-result]
strerror_r(-err, errmsg, sizeof(errmsg));
^
cc1: all warnings being treated as errors
mv: cannot stat './.libbpf.o.tmp': No such file or directory
/home6/tmricht/linux-next/tools/build/Makefile.build:96: recipe for target 'libbpf.o' failed
Replace all occurrences of strerror() by calls to strerror_r(). To
keep the compiler quiet also use the return value from strerror_r()
otherwise a 'variable set but not use' warning which is treated as
error terminates the compile.
Fixes: 531b014e7a ("tools: bpf: make use of reallocarray")
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix kprobe string argument testcase to not probe notrace
function. Instead, it probes tracefs function which must
be available with ftrace.
Link: http://lkml.kernel.org/r/153294607107.32740.1664854684396589624.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
I hit the following problem when I tried to use bpftool
to dump a percpu array.
$ sudo ./bpftool map show
61: percpu_array name stub flags 0x0
key 4B value 4B max_entries 1 memlock 4096B
...
$ sudo ./bpftool map dump id 61
bpftool: malloc.c:2406: sysmalloc: Assertion
`(old_top == initial_top (av) && old_size == 0) || \
((unsigned long) (old_size) >= MINSIZE && \
prev_inuse (old_top) && \
((unsigned long) old_end & (pagesize - 1)) == 0)'
failed.
Aborted
Further debugging revealed that this is due to
miscommunication between bpftool and kernel.
For example, for the above percpu_array with value size of 4B.
The map info returned to user space has value size of 4B.
In bpftool, the values array for lookup is allocated like:
info->value_size * get_possible_cpus() = 4 * get_possible_cpus()
In kernel (kernel/bpf/syscall.c), the values array size is
rounded up to multiple of 8.
round_up(map->value_size, 8) * num_possible_cpus()
= 8 * num_possible_cpus()
So when kernel copies the values to user buffer, the kernel will
overwrite beyond user buffer boundary.
This patch fixed the issue by allocating and stepping through
percpu map value array properly in bpftool.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This tests mirror-to-gretap when an underlay packet path includes a team
device which is not in loadbalance mode, but in LACP mode. The test
manipulates LAG membership to achieve changes in txability, thus making
sure that a driver that offloads mirror-to-gretap doesn't just consider
upness of a device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for "tc action mirred egress mirror" that mirrors to gretap when
the underlay route points at a VLAN-aware bridge (802.1q), and the
traffic egresses the bridge through a team device. Test upping and
downing individual team device slaves and verify the traffic flows as
expected.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on "arping" being installed everywhere under that
name, introduce a variable $ARPING like the other tools do.
Convert an existing test, mirror_gre_vlan_bridge_1q.sh to
require_command $ARPING and then invoke arping through the variable.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add team_create() and team_destroy() to manage team netdevices.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The logic for testing whether a certain command is available is used
several times in the current code base. The tests in follow-up patches
add more requirements like that.
Therefore extract the logic into a named function, require_command(),
that can be used directly from lib.sh as well as from any test that
wishes to declare dependence on some command.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The UAPI file byteorder/little_endian.h uses the __always_inline define
without including the header where it is defined, linux/stddef.h, this
ends up working in all the other distros because that file gets included
seemingly by luck from one of the files included from little_endian.h.
But not on Alpine:edge, that fails for all files where perf_event.h is
included but linux/stddef.h isn't include before that.
Adding the missing linux/stddef.h file where it breaks on Alpine:edge to
fix that, in all other distros, that is just a very small header anyway.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9r1pifftxvuxms8l7ir73p5l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To cope with the changes in:
12c89130a5 ("x86/asm/memcpy_mcsafe: Add write-protection-fault handling")
60622d6822 ("x86/asm/memcpy_mcsafe: Return bytes remaining")
bd131544aa ("x86/asm/memcpy_mcsafe: Add labels for __memcpy_mcsafe() write fault handling")
da7bc9c57e ("x86/asm/memcpy_mcsafe: Remove loop unrolling")
This needed introducing a file with a copy of the mcsafe_handle_tail()
function, that is used in the new memcpy_64.S file, as well as a dummy
mcsafe_test.h header.
Testing it:
$ nm ~/bin/perf | grep mcsafe
0000000000484130 T mcsafe_handle_tail
0000000000484300 T __memcpy_mcsafe
$
$ perf bench mem memcpy
# Running 'mem/memcpy' benchmark:
# function 'default' (Default memcpy() provided by glibc)
# Copying 1MB bytes ...
44.389205 GB/sec
# function 'x86-64-unrolled' (unrolled memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
22.710756 GB/sec
# function 'x86-64-movsq' (movsq-based memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
42.459239 GB/sec
# function 'x86-64-movsb' (movsb-based memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
42.459239 GB/sec
$
This silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-igdpciheradk3gb3qqal52d0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
4c79579b44 ("bpf: Change bpf_fib_lookup to return lookup status")
That do not entail changes in tools/perf/ use of it, elliminating the
following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yei494y6b3mn6bjzz9g0ws12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new 'io_pgetevents' syscall was wired up in PowerPC in the following
cset:
b2f82565f2 ("powerpc: Wire up io_pgetevents")
Update tools/arch/powerpc/ copy of the asm/unistd.h file so that 'perf
trace' on PowerPC gets it in its syscall table.
This elliminated the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h'
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/n/tip-9uvu7tz4ud3bxxfyxwryuz47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
6cbc304f2f ("perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)")
That do not imply any changes in the tooling side, the (ab)use of
sample_type is entirely done in kernel space, nothing for userspace to
witness here.
This cures the following warning during perf's build:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-o64mjoy35s9gd1gitunw1zg4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
files not using feature fixup don't need asm/feature-fixups.h
files using feature fixup need asm/feature-fixups.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch moves ASM_CONST() and stringify_in_c() into
dedicated asm-const.h, then cleans all related inclusions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: asm-compat.h should include asm-const.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are two problems in this test case:
- When indexing in bash associative array, the subscript is interpreted as
string, not as a variable name to be expanded.
- The keys stored to t0s and t1s are not DSCP values, but priority +
base (i.e. the logical DSCP value, not the full bitfield value).
In combination these two bugs conspire to make the test just work,
except it doesn't really test anything and always passes.
Fix the above two problems in obvious manner.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Ido's suggestion, this patch is to add a selftest for directed
broadcast forwarding with vrf. It does the assertion by checking
the src IP of the echo-reply packet in ping_test_from.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull turbostat utility fixes for 4.18 from Len Brown:
"Three of them are for regressions since Linux-4.17"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 18.07.27
tools/power turbostat: Read extended processor family from CPUID
tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
tools/power turbostat: fix x2apic debug message output file
tools/power turbostat: fix bogus summary values
tools/power turbostat: fix -S on UP systems
tools/power turbostat: Update turbostat(8) RAPL throttling column description
Daniel Borkmann says:
====================
pull-request: bpf 2018-07-28
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) API fixes for libbpf's BTF mapping of map key/value types in order
to make them compatible with iproute2's BPF_ANNOTATE_KV_PAIR()
markings, from Martin.
2) Fix AF_XDP to not report POLLIN prematurely by using the non-cached
consumer pointer of the RX queue, from Björn.
3) Fix __xdp_return() to check for NULL pointer after the rhashtable
lookup that retrieves the allocator object, from Taehee.
4) Fix x86-32 JIT to adjust ebp register in prologue and epilogue
by 4 bytes which got removed from overall stack usage, from Wang.
5) Fix bpf_skb_load_bytes_relative() length check to use actual
packet length, from Daniel.
6) Fix uninitialized return code in libbpf bpf_perf_event_read_simple()
handler, from Thomas.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In linux-next tree compiling the perf tool with additional make flags
EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2" causes a compiler error.
It is the warning 'variable may be used uninitialized' which is treated
as error: I compile it using a FEDORA 28 installation, my gcc compiler
version: gcc (GCC) 8.0.1 20180324 (Red Hat 8.0.1-0.20). The file that
causes the error is tools/lib/bpf/libbpf.c.
[root@p23lp27] # make V=1 EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2"
[...]
Makefile.config:849: No openjdk development package found, please
install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h'
differs from latest version at 'include/uapi/linux/if_link.h'
CC libbpf.o
libbpf.c: In function ‘bpf_perf_event_read_simple’:
libbpf.c:2342:6: error: ‘ret’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
int ret;
^
cc1: all warnings being treated as errors
mv: cannot stat './.libbpf.o.tmp': No such file or directory
/home6/tmricht/linux-next/tools/build/Makefile.build:96: recipe for target 'libbpf.o' failed
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a test that exercises the new code. Send DSCP-tagged packets, and
observe how they are prioritized in the switch and the DSCP is updated
on egress again.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the reported family on modern AMD processors (e.g. Ryzen,
which is family 0x17). Previously these processors all showed up as
family 0xf.
See the document
https://support.amd.com/TechDocs/56255_OSRR.pdf
section CPUID_Fn00000001_EAX for how to calculate the family
from the BaseFamily and ExtFamily values.
This matches the code in arch/x86/lib/cpu.c
Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
- Fix double free when the reg() call fails in event_trigger_callback()
- Fix anomoly of snapshot causing tracing_on flag to change
- Add selftest to test snapshot and tracing_on affecting each other
- Fix setting of tracepoint flag on error that prevents probes from
being deleted.
- Fix another possible double free that is similar to event_trigger_callback()
- Quiet a gcc warning of a false positive unused variable
- Fix crash of partial exposed task->comm to trace events
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW1pToBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qijEAQCzqQsnlO6YBCYajRBq2wFaM7J6tVnJ
LxLZlVE8lJlHZQD/YpyGOPq98CB81BfQV7RA/CAVd4RZAhTjldDgGyfL/QI=
=wU8I
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes to the tracing infrastructure:
- Fix double free when the reg() call fails in
event_trigger_callback()
- Fix anomoly of snapshot causing tracing_on flag to change
- Add selftest to test snapshot and tracing_on affecting each other
- Fix setting of tracepoint flag on error that prevents probes from
being deleted.
- Fix another possible double free that is similar to
event_trigger_callback()
- Quiet a gcc warning of a false positive unused variable
- Fix crash of partial exposed task->comm to trace events"
* tag 'trace-v4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kthread, tracing: Don't expose half-written comm when creating kthreads
tracing: Quiet gcc warning about maybe unused link variable
tracing: Fix possible double free in event_enable_trigger_func()
tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure
selftests/ftrace: Add snapshot and tracing_on test case
ring_buffer: tracing: Inherit the tracing setting to next ring buffer
tracing: Fix double free of event_trigger_data
Allow users to find programs by section names.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_map__fd() handles NULL map gracefully and returns -EINVAL.
bpf_program__fd() and bpf_program__nth_fd() crash in this case.
Make the behaviour more consistent by validating prog pointer
as well.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The current map_check_btf() in BPF_MAP_TYPE_ARRAY rejects
'> map->value_size' to ensure map_seq_show_elem() will not
access things beyond an array element.
Yonghong suggested that using '!=' is a more correct
check. The 8 bytes round_up on value_size is stored
in array->elem_size. Hence, using '!=' on map->value_size
is a proper check.
This patch also adds new tests to check the btf array
key type and value type. Two of these new tests verify
the btf's value_size (the change in this patch).
It also fixes two existing tests that wrongly encoded
a btf's type size (pprint_test) and the value_type_id (in one
of the raw_tests[]). However, that do not affect these two
BTF verification tests before or after this test changes.
These two tests mainly failed at array creation time after
this patch.
Fixes: a26ca7c982 ("bpf: btf: Add pretty print support to the basic arraymap")
Suggested-by: Yonghong Song <yhs@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
turbostat fails on some multi-package topologies because the logical node
enumeration assumes that the nodes are sequentially numbered,
which causes the logical numa nodes to not be enumerated, or enumerated incorrectly.
Use a more robust enumeration algorithm which allows for non-seqential physical nodes.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch fixes a regression introduced in
commit 8cb48b32a5 ("tools/power turbostat: track thread ID in cpu_topology")
Turbostat uses incorrect cores number ('topo.num_cores') - its value is count
of logical CPUs, instead of count of physical cores. So it is twice as large as
it should be on a typical Intel system. For example, on a 6 core Xeon system
'topo.num_cores' is 12, and on a 52 core Xeon system 'topo.num_cores' is 104.
And interestingly, on a 68-core Knights Landing Intel system 'topo.num_cores'
is 272, because this system has 4 logical CPUs per core.
As a result, some of the turbostat calculations are incorrect. For example,
on idle 52-core Xeon system when all cores are ~99% in Core C6 (CPU%c6), the
summary (very first) line shows ~48% Core C6, while it should be ~99%.
This patch fixes the problem by fixing 'topo.num_cores' calculation.
Was:
1. Init 'thread_id' for all CPUs to -1
2. Run 'get_thread_siblings()' which sets it to 0 or 1
3. Increment 'topo.num_cores' when thread_id != -1 (bug!)
Now:
1. Init 'thread_id' for all CPUs to -1
2. Run 'get_thread_siblings()' which sets it to 0 or 1
3. Increment 'topo.num_cores' when thread_id is not 0
I did not have a chance to test this on an AMD machine, and only tested on a
couple of Intel Xeons (6 and 52 cores).
Reported-by: Vladislav Govtva <vladislav.govtva@intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add the tls binary to .gitignore
Fixes: 7f657d5bf5 ("selftests: tls: add selftests for TLS sockets")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are a number of USB fixes and new device ids for 4.18-rc7.
The largest number are a bunch of gadget driver fixes that got delayed
in being submitted earlier due to vacation schedules, but nothing really
huge is present in them. There are some new device ids and some PHY
driver fixes that were connected to some USB ones. Full details are in
the shortlog.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW1nXnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoWACfTbc0TF6u9hNALIS9nsgLxevZLjYAnA5RJ12y
TTBeXMIAvCUKILAXPQok
=spWc
-----END PGP SIGNATURE-----
Merge tag 'usb-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes and new device ids for 4.18-rc7.
The largest number are a bunch of gadget driver fixes that got delayed
in being submitted earlier due to vacation schedules, but nothing
really huge is present in them. There are some new device ids and some
PHY driver fixes that were connected to some USB ones. Full details
are in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
usb: core: handle hub C_PORT_OVER_CURRENT condition
usb: xhci: Fix memory leak in xhci_endpoint_reset()
usb: typec: tcpm: Fix sink PDO starting index for PPS APDO selection
usb: gadget: f_fs: Only return delayed status when len is 0
usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3'
usb: dwc2: Fix inefficient copy of unaligned buffers
usb: dwc2: Fix DMA alignment to start at allocated boundary
usb: dwc3: rockchip: Fix PHY documentation links.
tools: usb: ffs-test: Fix build on big endian systems
usb: gadget: aspeed: Workaround memory ordering issue
usb: dwc3: gadget: remove redundant variable maxpacket
usb: dwc2: avoid NULL dereferences
usb/phy: fix PPC64 build errors in phy-fsl-usb.c
usb: dwc2: host: do not delay retries for CONTROL IN transfers
usb: gadget: u_audio: protect stream runtime fields with stream spinlock
usb: gadget: u_audio: remove cached period bytes value
usb: gadget: u_audio: remove caching of stream buffer parameters
usb: gadget: u_audio: update hw_ptr in iso_complete after data copied
usb: gadget: u_audio: fix pcm/card naming in g_audio_setup()
usb: gadget: f_uac2: fix error handling in afunc_bind (again)
...
Here we add unit tests for the preemptoff and irqsoff tracer by using a
kernel module introduced previously to trigger long preempt or irq
disabled sections in the kernel.
Link: http://lkml.kernel.org/r/20180711063540.91101-3-joel@joelfernandes.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
For untracked things of tools/bpf, add this.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are also a couple of fixes that can wait for the coming merge
window.
Core new features
* Support for phase channels (used in time of flight sensors amongst
other things)
* Support for deep UV light channel modifier.
New Device Support
* AD4758 DAC
- New driver and dt bindings.
* adxl345
- Support the adxl375 +-200g part which is register compatible.
* isl29501 Time of flight sensor.
- New driver
* meson-saradc
- Support the Meson8m2 Socs - right now this is just an ID, but there will
be additional difference in future.
* mpu6050
- New ID for 6515 variant.
* si1133 UV sensor.
- New driver
* Spreadtrum SC27xx PMIC ADC
- New driver and dt bindings.
Features
* adxl345
- Add calibration offset readback and writing.
- Add sampling frequency control.
Fixes and Cleanups
* ad5933
- Use a macro for the channel definition to reduce duplication.
* ad9523
- Replace use of core mlock with a local lock. Part of ongoing efforts
to avoid confusing the purpose of mlock which is only about iio core
state changes.
- Fix displayed phase which was out by a factor of 10.
* adxl345
- Add a link to the datasheet.
- Rework the use of the address field in the chan_spec structures to
allow addition of more per channel information.
* adis imu
- Mark switch fall throughs.
* at91-sama5d2
- Fix some casting on big endian systems.
* bmp280
- Drop some DT elements that aren't used and should mostly be done from
userspace rather than in DT.
* hx711
- add clock-frequency dt binding and resulting delay to deal with capacitance
issue on some boards.
- fix a spurious unit-address in the example.
* ina2xx
- Avoid a possible kthread_stop with a stale task_struct.
* ltc2632
- Remove some unused local variables (assigned but value never used).
* max1363
- Use device_get_match_data to remove some boilerplate.
* mma8452
- Mark switch fall throughs.
* sca3000
- Fix a missing return in a switch statement (a bad fallthrough
previously!)
* sigma-delta-modulator
- Drop incorrect unit address from the DT example.
* st_accel
- Use device_get_match_data to drop some boiler plate.
- Move to probe_new for i2c driver as second parameter not used.
* st_sensors library
- Use a strlcpy (safe in this case).
* st_lsm6dsx
- Add some error logging.
* ti-ads7950
- SPDX
- Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms
EV3 where some channels are used for power supply monitoring at a very low
rate.
* ti-dac5571
- Remove an unused variable.
* xadc
- Drop some dead code.
-----BEGIN PGP SIGNATURE-----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=T+hS
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.19b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new device support, features and cleanups.
There are also a couple of fixes that can wait for the coming merge
window.
Core new features
* Support for phase channels (used in time of flight sensors amongst
other things)
* Support for deep UV light channel modifier.
New Device Support
* AD4758 DAC
- New driver and dt bindings.
* adxl345
- Support the adxl375 +-200g part which is register compatible.
* isl29501 Time of flight sensor.
- New driver
* meson-saradc
- Support the Meson8m2 Socs - right now this is just an ID, but there will
be additional difference in future.
* mpu6050
- New ID for 6515 variant.
* si1133 UV sensor.
- New driver
* Spreadtrum SC27xx PMIC ADC
- New driver and dt bindings.
Features
* adxl345
- Add calibration offset readback and writing.
- Add sampling frequency control.
Fixes and Cleanups
* ad5933
- Use a macro for the channel definition to reduce duplication.
* ad9523
- Replace use of core mlock with a local lock. Part of ongoing efforts
to avoid confusing the purpose of mlock which is only about iio core
state changes.
- Fix displayed phase which was out by a factor of 10.
* adxl345
- Add a link to the datasheet.
- Rework the use of the address field in the chan_spec structures to
allow addition of more per channel information.
* adis imu
- Mark switch fall throughs.
* at91-sama5d2
- Fix some casting on big endian systems.
* bmp280
- Drop some DT elements that aren't used and should mostly be done from
userspace rather than in DT.
* hx711
- add clock-frequency dt binding and resulting delay to deal with capacitance
issue on some boards.
- fix a spurious unit-address in the example.
* ina2xx
- Avoid a possible kthread_stop with a stale task_struct.
* ltc2632
- Remove some unused local variables (assigned but value never used).
* max1363
- Use device_get_match_data to remove some boilerplate.
* mma8452
- Mark switch fall throughs.
* sca3000
- Fix a missing return in a switch statement (a bad fallthrough
previously!)
* sigma-delta-modulator
- Drop incorrect unit address from the DT example.
* st_accel
- Use device_get_match_data to drop some boiler plate.
- Move to probe_new for i2c driver as second parameter not used.
* st_sensors library
- Use a strlcpy (safe in this case).
* st_lsm6dsx
- Add some error logging.
* ti-ads7950
- SPDX
- Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms
EV3 where some channels are used for power supply monitoring at a very low
rate.
* ti-dac5571
- Remove an unused variable.
* xadc
- Drop some dead code.
Adjust tcp_client.py and tcp_server.py to work with Python 3 by using
the print function, marking string literals as bytes, and using the
newer exception syntax. This should be functionally equivalent and
supports Python 3+.
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix inconsistent IS_ERR and PTR_ERR in get_btf,
the proper pointer to be passed as argument is '*btf'
This issue was detected with the help of Coccinelle.
Fixes: 2d3feca8c4 ("bpf: btf: print map dump and lookup with btf info")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch introduces BPF_ANNOTATE_KV_PAIR to signal the
bpf loader about the btf key_type and value_type of a bpf map.
Please refer to the changes in test_btf_haskv.c for its usage.
Both iproute2 and libbpf loader will then have the same
convention to find out the map's btf_key_type_id and
btf_value_type_id from a map's name.
Fixes: 8a138aed4a ("bpf: btf: Add BTF support to libbpf")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch replaces [u]int32_t and [u]int64_t usage with
__[su]32 and __[su]64. The same change goes for [u]int16_t
and [u]int8_t.
Fixes: 8a138aed4a ("bpf: btf: Add BTF support to libbpf")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch sync the uapi btf.h to tools/
Fixes: 36fc3c8c28 bpf: btf: Clean up BTF_INT_BITS() in uapi btf.h
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking fixes from David Miller:
1) Handle stations tied to AP_VLANs properly during mac80211 hw
reconfig. From Manikanta Pubbisetty.
2) Fix jump stack depth validation in nf_tables, from Taehee Yoo.
3) Fix quota handling in aRFS flow expiration of mlx5 driver, from Eran
Ben Elisha.
4) Exit path handling fix in powerpc64 BPF JIT, from Daniel Borkmann.
5) Use ptr_ring_consume_bh() in page pool code, from Tariq Toukan.
6) Fix cached netdev name leak in nf_tables, from Florian Westphal.
7) Fix memory leaks on chain rename, also from Florian Westphal.
8) Several fixes to DCTCP congestion control ACK handling, from Yuchunk
Cheng.
9) Missing rcu_read_unlock() in CAIF protocol code, from Yue Haibing.
10) Fix link local address handling with VRF, from David Ahern.
11) Don't clobber 'err' on a successful call to __skb_linearize() in
skb_segment(). From Eric Dumazet.
12) Fix vxlan fdb notification races, from Roopa Prabhu.
13) Hash UDP fragments consistently, from Paolo Abeni.
14) If TCP receives lots of out of order tiny packets, we do really
silly stuff. Make the out-of-order queue ending more robust to this
kind of behavior, from Eric Dumazet.
15) Don't leak netlink dump state in nf_tables, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
net: axienet: Fix double deregister of mdio
qmi_wwan: fix interface number for DW5821e production firmware
ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull
bnx2x: Fix invalid memory access in rss hash config path.
net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper
r8169: restore previous behavior to accept BIOS WoL settings
cfg80211: never ignore user regulatory hint
sock: fix sg page frag coalescing in sk_alloc_sg
netfilter: nf_tables: move dumper state allocation into ->start
tcp: add tcp_ooo_try_coalesce() helper
tcp: call tcp_drop() from tcp_data_queue_ofo()
tcp: detect malicious patterns in tcp_collapse_ofo_queue()
tcp: avoid collapses in tcp_prune_queue() if possible
tcp: free batches of packets in tcp_prune_ofo_queue()
ip: hash fragments consistently
ipv6: use fib6_info_hold_safe() when necessary
can: xilinx_can: fix power management handling
can: xilinx_can: fix incorrect clear of non-processed interrupts
can: xilinx_can: fix RX overflow interrupt not being enabled
can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting
...
Perf test 40 for example has several subtests numbered 1-4 when
displaying the start of the subtest. When the subtest results
are displayed the subtests are numbered 0-3.
Use this command to generate trace output:
[root@s35lp76 perf]# ./perf test -Fv 40 2>/tmp/bpf1
Fix this by adjusting the subtest number when show the
subtest result.
Output before:
[root@s35lp76 perf]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
40.1: Basic BPF filtering :
BPF filter subtest 0: Ok
40.2: BPF pinning :
BPF filter subtest 1: Ok
40.3: BPF prologue generation :
BPF filter subtest 2: Ok
40.4: BPF relocation checker :
BPF filter subtest 3: Ok
[root@s35lp76 perf]#
Output after:
root@s35lp76 ~]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
40.1: Basic BPF filtering :
BPF filter subtest 1: Ok
40.2: BPF pinning :
BPF filter subtest 2: Ok
40.3: BPF prologue generation :
BPF filter subtest 3: Ok
40.4: BPF relocation checker :
BPF filter subtest 4: Ok
[root@s35lp76 ~]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180724134858.100644-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no reason to have separate function to display clock events.
It's only purpose was to convert the nanosecond value into microseconds.
We do that now in generic code, if the unit and scale values are
properly set, which this patch do for clock events.
The output differs in the unit field being displayed in its columns
rather than having it added as a suffix of the event name. Plus the
value is rounded into 2 decimal numbers as for any other event.
Before:
# perf stat -e cpu-clock,task-clock -C 0 sleep 3
Performance counter stats for 'CPU(s) 0':
3001.123137 cpu-clock (msec) # 1.000 CPUs utilized
3001.133250 task-clock (msec) # 1.000 CPUs utilized
3.001159813 seconds time elapsed
Now:
# perf stat -e cpu-clock,task-clock -C 0 sleep 3
Performance counter stats for 'CPU(s) 0':
3,001.05 msec cpu-clock # 1.000 CPUs utilized
3,001.05 msec task-clock # 1.000 CPUs utilized
3.001077794 seconds time elapsed
There's a small difference in csv output, as we now output the unit
field, which was empty before. It's in the proper spot, so there's no
compatibility issue.
Before:
# perf stat -e cpu-clock,task-clock -C 0 -x, sleep 3
3001.065177,,cpu-clock,3001064187,100.00,1.000,CPUs utilized
3001.077085,,task-clock,3001077085,100.00,1.000,CPUs utilized
# perf stat -e cpu-clock,task-clock -C 0 -x, sleep 3
3000.80,msec,cpu-clock,3000799026,100.00,1.000,CPUs utilized
3000.80,msec,task-clock,3000799550,100.00,1.000,CPUs utilized
Add perf_evsel__is_clock to replace nsec_counter.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180720110036.32251-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use perf_evsel__match() helper in perf_evsel__is_bpf_output().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180720110036.32251-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We occasionaly hit following assert failure in 'perf top', when processing the
/proc info in multiple threads.
perf: ...include/linux/refcount.h:109: refcount_inc:
Assertion `!(!refcount_inc_not_zero(r))' failed.
The gdb backtrace looks like this:
[Switching to Thread 0x7ffff11ba700 (LWP 13749)]
0x00007ffff50839fb in raise () from /lib64/libc.so.6
(gdb)
#0 0x00007ffff50839fb in raise () from /lib64/libc.so.6
#1 0x00007ffff5085800 in abort () from /lib64/libc.so.6
#2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6
#3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6
#4 0x0000000000535373 in refcount_inc (r=0x7fffdc009be0)
at ...include/linux/refcount.h:109
#5 0x00000000005354f1 in comm_str__get (cs=0x7fffdc009bc0)
at util/comm.c:24
#6 0x00000000005356bd in __comm_str__findnew (str=0x7fffd000b260 ":2",
root=0xbed5c0 <comm_str_root>) at util/comm.c:72
#7 0x000000000053579e in comm_str__findnew (str=0x7fffd000b260 ":2",
root=0xbed5c0 <comm_str_root>) at util/comm.c:95
#8 0x000000000053582e in comm__new (str=0x7fffd000b260 ":2",
timestamp=0, exec=false) at util/comm.c:111
#9 0x00000000005363bc in thread__new (pid=2, tid=2) at util/thread.c:57
#10 0x0000000000523da0 in ____machine__findnew_thread (machine=0xbfde38,
threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:457
#11 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38,
...
The failing assertion is this one:
REFCOUNT_WARN(!refcount_inc_not_zero(r), ...
The problem is that we keep global comm_str_root list, which
is accessed by multiple threads during the 'perf top' startup
and following 2 paths can race:
thread 1:
...
thread__new
comm__new
comm_str__findnew
down_write(&comm_str_lock);
__comm_str__findnew
comm_str__get
thread 2:
...
comm__override or comm__free
comm_str__put
refcount_dec_and_test
down_write(&comm_str_lock);
rb_erase(&cs->rb_node, &comm_str_root);
Because thread 2 first decrements the refcnt and only after then it removes the
struct comm_str from the list, the thread 1 can find this object on the list
with refcnt equls to 0 and hit the assert.
This patch fixes the thread 1 __comm_str__findnew path, by ignoring objects
that already dropped the refcnt to 0. For the rest of the objects we take the
refcnt before comparing its name and release it afterwards with comm_str__put,
which can also release the object completely.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20180720101740.GA27176@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's an issue with using threads::last_match in multithread mode
which is enabled during the perf top synthesize. It might crash with
following assertion:
perf: ...include/linux/refcount.h:109: refcount_inc:
Assertion `!(!refcount_inc_not_zero(r))' failed.
The gdb backtrace looks like this:
0x00007ffff50839fb in raise () from /lib64/libc.so.6
(gdb)
#0 0x00007ffff50839fb in raise () from /lib64/libc.so.6
#1 0x00007ffff5085800 in abort () from /lib64/libc.so.6
#2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6
#3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6
#4 0x0000000000535ff9 in refcount_inc (r=0x7fffe8009a70)
at ...include/linux/refcount.h:109
#5 0x0000000000536771 in thread__get (thread=0x7fffe8009a40)
at util/thread.c:115
#6 0x0000000000523cd0 in ____machine__findnew_thread (machine=0xbfde38,
threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:432
#7 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38,
pid=2, tid=2) at util/machine.c:489
#8 0x0000000000523f24 in machine__findnew_thread (machine=0xbfde38,
pid=2, tid=2) at util/machine.c:499
#9 0x0000000000526fbe in machine__process_fork_event (machine=0xbfde38,
...
The failing assertion is this one:
REFCOUNT_WARN(!refcount_inc_not_zero(r), ...
the problem is that we don't serialize access to threads::last_match.
We serialize the access to the threads tree, but we don't care how's
threads::last_match being accessed. Both locked/unlocked paths use
that data and can set it. In multithreaded mode we can end up with
invalid object in thread__get call, like in following paths race:
thread 1
...
machine__findnew_thread
down_write(&threads->lock);
__machine__findnew_thread
____machine__findnew_thread
th = threads->last_match;
if (th->tid == tid) {
thread__get
thread 2
...
machine__find_thread
down_read(&threads->lock);
__machine__findnew_thread
____machine__findnew_thread
th = threads->last_match;
if (th->tid == tid) {
thread__get
thread 3
...
machine__process_fork_event
machine__remove_thread
__machine__remove_thread
threads->last_match = NULL
thread__put
thread__put
Thread 1 and 2 might got stale last_match, before thread 3 clears
it. Thread 1 and 2 then race with thread 3's thread__put and they
might trigger the refcnt == 0 assertion above.
The patch is disabling the last_match cache for multiple thread
mode. It was originally meant for single thread scenarios, where
it's common to have multiple sequential searches of the same
thread.
In multithread mode this does not make sense, because top's threads
processes different /proc entries and so the 'struct threads' object
is queried for various threads. Moreover we'd need to add more locks
to make it work.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180719143345.12963-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separating threads::last_match cache set into separate
threads__set_last_match function. This will be useful in following
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180719143345.12963-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separating threads::last_match cache read/check into separate
threads__get_last_match function. This will be useful in following
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180719143345.12963-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephan reported, that pipe mode does not carry the group information
and thus the piped report won't display the grouped output for following
command:
# perf record -e '{cycles,instructions,branches}' -a sleep 4 | perf report
It has no idea about the group setup, so it will display events
separately:
# Overhead Command Shared Object ...
# ........ ............... .......................
#
6.71% swapper [kernel.kallsyms]
2.28% offlineimap libpython2.7.so.1.0
0.78% perf [kernel.kallsyms]
...
Fix GROUP_DESC feature record to be synthesized in pipe mode, so the
report output is grouped if there are groups defined in record:
# Overhead Command Shared ...
# ........................ ............... .......
#
7.57% 0.16% 0.30% swapper [kernel
1.87% 3.15% 2.46% offlineimap libpyth
1.33% 0.00% 0.00% perf [kernel
...
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180712135202.14774-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf/data is recorded with the dwarf call-graph option, the
callchain shown by 'perf script' still shows the binary offsets of the
userspace symbols instead of their virtual addresses. Since the symbol
offset calculation is based on using virtual address as the ip, we see
incorrect offsets as well.
The use of virtual addresses affects the ability to find out the
line number in the corresponding source file to which an address
maps to as described in commit 6754075915 ("perf unwind: Use
addr_location::addr instead of ip for entries").
This has also been addressed by temporarily converting the virtual
address to the correponding binary offset so that it can be mapped
to the source line number correctly.
This is a follow-up for commit 1961018469 ("perf script: Show
virtual addresses instead of offsets").
This can be verified on a powerpc64le system running Fedora 27 as
shown below:
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton
# perf record -e probe_libc:inet_pton --call-graph=dwarf ping -6 -c 1 ::1
Before:
# perf report --stdio --no-children -s sym,srcline -g address
# Samples: 1 of event 'probe_libc:inet_pton'
# Event count (approx.): 1
#
# Overhead Symbol Source:Line
# ........ .................... ...........
#
100.00% [.] __GI___inet_pton inet_pton.c
|
---gaih_inet getaddrinfo.c:537 (inlined)
__GI_getaddrinfo getaddrinfo.c:2304 (inlined)
main ping.c:519
generic_start_main libc-start.c:308 (inlined)
__libc_start_main libc-start.c:102
...
# perf script -F comm,ip,sym,symoff,srcline,dso
ping
15af28 __GI___inet_pton+0xffff000099160008 (/usr/lib64/libc-2.26.so)
libc-2.26.so[ffff80004ca0af28]
10fa53 gaih_inet+0xffff000099160f43
libc-2.26.so[ffff80004c9bfa53] (inlined)
1105b3 __GI_getaddrinfo+0xffff000099160163
libc-2.26.so[ffff80004c9c05b3] (inlined)
2d6f main+0xfffffffd9f1003df (/usr/bin/ping)
ping[fffffffecf882d6f]
2369f generic_start_main+0xffff00009916013f
libc-2.26.so[ffff80004c8d369f] (inlined)
23897 __libc_start_main+0xffff0000991600b7 (/usr/lib64/libc-2.26.so)
libc-2.26.so[ffff80004c8d3897]
After:
# perf report --stdio --no-children -s sym,srcline -g address
# Samples: 1 of event 'probe_libc:inet_pton'
# Event count (approx.): 1
#
# Overhead Symbol Source:Line
# ........ .................... ...........
#
100.00% [.] __GI___inet_pton inet_pton.c
|
---gaih_inet.constprop.7 getaddrinfo.c:537
getaddrinfo getaddrinfo.c:2304
main ping.c:519
generic_start_main.isra.0 libc-start.c:308
__libc_start_main libc-start.c:102
...
# perf script -F comm,ip,sym,symoff,srcline,dso
ping
7fffb38aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
inet_pton.c:68
7fffb385fa53 gaih_inet.constprop.7+0xf43 (/usr/lib64/libc-2.26.so)
getaddrinfo.c:537
7fffb38605b3 getaddrinfo+0x163 (/usr/lib64/libc-2.26.so)
getaddrinfo.c:2304
130782d6f main+0x3df (/usr/bin/ping)
ping.c:519
7fffb377369f generic_start_main.isra.0+0x13f (/usr/lib64/libc-2.26.so)
libc-start.c:308
7fffb3773897 __libc_start_main+0xb7 (/usr/lib64/libc-2.26.so)
libc-start.c:102
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 6754075915 ("perf unwind: Use addr_location::addr instead of ip for entries")
Link: http://lkml.kernel.org/r/20180703120555.32971-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This should speed up accessing new system calls introduced with the
kernel rather than waiting for libaudit updates to include them.
It also enables users to specify wildcards, for example, perf trace -e
'open*', just like was already possible on x86, s390, and powerpc, which
means arm64 can now pass the "Check open filename arg using perf trace +
vfs_getname" test.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180706163454.f714b9ab49ecc8566a0b3565@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This should speed up accessing new system calls introduced with the
kernel rather than waiting for libaudit updates to include them.
Using the existing other arch scripts resulted in this error:
tools/perf/arch/arm64/entry/syscalls//mksyscalltbl: 25: printf: __NR3264_ftruncate: expected numeric value
because, unlike other arches, asm-generic's unistd.h does things like:
#define __NR_ftruncate __NR3264_ftruncate
Turning the scripts printf's %d into a %s resulted in this in the
generated syscalls.c file:
static const char *syscalltbl_arm64[] = {
[__NR3264_ftruncate] = "ftruncate",
So we use the host C compiler to fold the macros, and print them out
from within a temporary C program, in order to get the correct output:
static const char *syscalltbl_arm64[] = {
[46] = "ftruncate",
Committer notes:
Testing this with a container with an old toolchain breaks because it
ends up using the system's /usr/include/asm-generic/unistd.h, included
from tools/arch/arm64/include/uapi/asm/unistd.h when what is desired is
for it to include tools/include/uapi/asm-generic/unistd.h.
Since all that tools/arch/arm64/include/uapi/asm/unistd.h is to set a
define and then include asm-generic/unistd.h, do that directly and use
tools/include/uapi/asm-generic/unistd.h as the file to get the syscall
definitions to expand.
Testing it:
tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc tools/include/uapi/asm-generic/unistd.h
Now works and generates in the syscall string table.
Before it ended up as:
$ tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc tools/arch/arm64/include/uapi/asm/unistd.h
static const char *syscalltbl_arm64[] = {
<stdin>: In function 'main':
<stdin>:257:38: error: '__NR_getrandom' undeclared (first use in this function)
<stdin>:257:38: note: each undeclared identifier is reported only once for each function it appears in
<stdin>:258:41: error: '__NR_memfd_create' undeclared (first use in this function)
<stdin>:259:32: error: '__NR_bpf' undeclared (first use in this function)
<stdin>:260:37: error: '__NR_execveat' undeclared (first use in this function)
tools/perf/arch/arm64/entry/syscalls/mksyscalltbl: 47: tools/perf/arch/arm64/entry/syscalls/mksyscalltbl: /tmp/create-table-60liya: Permission denied
};
$
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180706163443.22626f5e9e10e5bab5e5c662@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used for generating the syscall id/string translation table.
The arm64 unistd.h file simply #includes the asm-generic/unistd.h, so,
since we will want to know whether either change, we grab both:
arch/arm64/include/uapi/asm/unistd.h
and
include/uapi/asm-generic/unistd.h
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180706163434.1b64ffbcc0284fb79982f53b@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the event 'probe_libc:inet_pton' already exists, this test fails and
deletes the existing event before exiting. This will then pass for any
subsequent executions.
Instead of skipping to deleting the existing event because of failing to
add a new event, a duplicate event is now created and the script
continues with the usual checks. Only the new duplicate event that is
created at the beginning of the test is deleted as a part of the
cleanups in the end. All existing events remain as it is.
This can be observed on a powerpc64 system running Fedora 27 as shown
below.
# perf probe -x /usr/lib64/power8/libc-2.26.so -a inet_pton
Added new event:
probe_libc:inet_pton (on inet_pton in /usr/lib64/power8/libc-2.26.so)
Before:
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 21302
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
# perf probe --list
After:
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 21490
ping 21513 [035] 39357.565561: probe_libc:inet_pton_1: (7fffa4c623b0)
7fffa4c623b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so)
7fffa4c190dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)
7fffa4c19c4c getaddrinfo+0x15c (/usr/lib64/power8/libc-2.26.so)
111d93c20 main+0x3e0 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
# perf probe --list
probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so)
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/e11fecff96e6cf4c65cdbd9012463513d7b8356c.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If there is a mismatch in the perf script output, this test fails and
exits before the event and temporary files created during its execution
are cleaned up.
This can be observed on a powerpc64 system running Fedora 27 as shown
below.
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 18655
ping 18674 [013] 24511.496995: probe_libc:inet_pton: (7fffa6b423b0)
7fffa6b423b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so)
7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)
FAIL: expected backtrace entry "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/power8/libc-2.26.so\)$" got "7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
# ls /tmp/expected.* /tmp/perf.data.* /tmp/perf.script.*
/tmp/expected.u31 /tmp/perf.data.Pki /tmp/perf.script.Bhs
# perf probe --list
probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so)
Cleanup of the event and the temporary files are now ensured by allowing
the cleanup code to be executed even if the lines from the backtrace do
not match their expected patterns instead of simply exiting from the
point of failure.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/ce9fb091dd3028fba8749a1a267cfbcb264bbfb1.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For powerpc64, this test currently fails due to a mismatch in the
expected output.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# perf test -v "probe libc's inet_pton & backtrace it with ping"
Before:
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 23948
ping 23965 [003] 71136.075084: probe_libc:inet_pton: (7fff996aaf28)
7fff996aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
FAIL: expected backtrace entry 2 "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc-2.26.so\)$" got "7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
After:
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 24638
ping 24655 [001] 71208.525396: probe_libc:inet_pton: (7fffa245af28)
7fffa245af28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fffa240fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
7fffa24105b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
138d52d70 main+0x3e0 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: e07d585e2454 ("perf tests: Switch trace+probe_libc_inet_pton to use record")
Link: http://lkml.kernel.org/r/49621ec5f37109f0655e5a8c32287ad68d85a1e5.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For powerpc64, perf will filter out the second entry in the callchain,
i.e. the LR value, if the return address of the function corresponding
to the probed location has already been saved on its caller's stack.
The state of the return address is determined using debug information.
At any point within a function, if the return address is already saved
somewhere, a DWARF expression can tell us about its location. If the
return address in still in LR only, no DWARF expression would exist.
Typically, the instructions in a function's prologue first copy the LR
value to R0 and then pushes R0 on to the stack. If LR has already been
copied to R0 but R0 is yet to be pushed to the stack, we can still get a
DWARF expression that says that the return address is in R0. This is
indicating that getting a DWARF expression for the return address does
not guarantee the fact that it has already been saved on the stack.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# objdump -d /usr/lib64/libc-2.26.so | less
...
000000000015af20 <inet_pton>:
15af20: 0b 00 4c 3c addis r2,r12,11
15af24: e0 c1 42 38 addi r2,r2,-15904
15af28: a6 02 08 7c mflr r0
15af2c: f0 ff c1 fb std r30,-16(r1)
15af30: f8 ff e1 fb std r31,-8(r1)
15af34: 78 1b 7f 7c mr r31,r3
15af38: 78 23 83 7c mr r3,r4
15af3c: 78 2b be 7c mr r30,r5
15af40: 10 00 01 f8 std r0,16(r1)
15af44: c1 ff 21 f8 stdu r1,-64(r1)
15af48: 28 00 81 f8 std r4,40(r1)
...
# readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less
...
00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88
LOC CFA r30 r31 ra
000000000015af20 r1+0 u u u
000000000015af34 r1+0 c-16 c-8 r0
000000000015af48 r1+64 c-16 c-8 c+16
000000000015af5c r1+0 c-16 c-8 c+16
000000000015af78 r1+0 u u
...
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18
# perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
# perf script
Before:
ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
12f152d70 _init+0xbfc (/usr/bin/ping)
7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
After:
ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
12f152d70 _init+0xbfc (/usr/bin/ping)
7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing documentation for --desc and --debug options to the 'perf
list' man page.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20180717110738.10779-1-qpakzk@gmail.com
[ Clarify that --desc is by default active ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With commit eca0fa28cd ("perf record: Provide detailed information on
s390 CPU") s390 platform provides detailed type/model/capacity
information in the CPU identifier string instead of just "IBM/S390".
This breaks 'perf kvm' support which uses hard coded string IBM/S390 to
compare with the CPU identifier string. Fix this by changing the
comparison.
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: stable@vger.kernel.org
Fixes: eca0fa28cd ("perf record: Provide detailed information on s390 CPU")
Link: http://lkml.kernel.org/r/20180712070936.67547-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf stat' command line flag -T to display transaction counters is
currently supported for x86 only.
Add support for s390. It is based on the metrics flag -M transaction
using the architecture dependent JSON files. This requires a metric
named "transaction" in the JSON files for the platform.
Introduce a new function metricgroup__has_metric() to check for the
existence of a metric_name transaction.
As suggested by Andi Kleen, this is the new approach to support
transactions counters. Other architectures will follow.
Output before:
[root@p23lp27 perf]# ./perf stat -T -- sleep 1
Cannot set up transaction events
[root@p23lp27 perf]#
Output after:
[root@s35lp76 perf]# ./perf stat -T -- ~/mytesttx 1 >/tmp/111
Performance counter stats for '/root/mytesttx 1':
1 tx_c_tend # 13.0 transaction
1 tx_nc_tend
11 tx_nc_tabort
0 tx_c_tabort_special
0 tx_c_tabort_no_special
0.001070109 seconds time elapsed
[root@s35lp76 perf]#
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180626071701.58190-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Correct the support of detailed/verbose PMU event description by using
the "Unit": keyword in the json files to address event names refering to
the /sys/devices/cpum_[cs]f devices.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180621080452.61012-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit 038586c343.
Fix the support of detailed/verbose PMU event description by using the
"Unit": keyword in the json files to address event names refering to the
/sys/devices/cpum_[cs]f devices.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180621080452.61012-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the instruction sample failure has happened, it isn't necessary to
execute to the end of the function cs_etm__flush(). This commit is to
bail out immediately and return the error code.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1529298599-3876-3-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces invalid address macro and uses it to replace dummy
value '0xdeadbeefdeadbeefUL'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1529298599-3876-2-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We want to allow having mixed events with/without callchains, not
using a global flag to show callchains, but allowing supressing
callchains when they are present.
So invert the logic of the last parameter to hists__fprint() to
that effect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ohqyisr6qge79qa95ojslptx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch reworked selftest memcmp_64 so that memcmp selftest can
cover more test cases.
It adds testcases for:
- memcmp over 4K bytes size.
- s1/s2 with different/random offset on 16 bytes boundary.
- enter/exit_vmx_ops pairness.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Add -maltivec to fix build on some toolchains]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The test case assumes execute-permissions of unallocated keys are
enabled by default, which is incorrect.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only when the key is allocated, its permission are enabled.
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The shared block support is only needed for tc_shblock.sh. No need to
require that for other test.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch ensures the member->offset of a struct
is in the correct order (i.e the later member's offset cannot
go backward).
The current "pahole -J" BTF encoder does not generate something
like this. However, checking this can ensure future encoder
will not violate this.
Fixes: 69b693f0ae ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Support for device-only IPv6 multipath next hops was dropped in
commit 33bd5ac54d ("net/ipv6: Revert attempt to simplify route replace
and append") and as of commit b5d2d75e07 ("net/ipv6: Do not allow
device only routes via the multipath API"), attempts to add a next hop
like that yield an explicit diagnostic.
Correspondingly, drop the IPv6 parts of GRE multipath test that are
supposed to test that code.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hook up arm64 support to the rseq selftests.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull core kernel fixes from Ingo Molnar:
"This is mostly the copy_to_user_mcsafe() related fixes from Dan
Williams, and an ORC fix for Clang"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/memcpy_mcsafe: Fix copy_to_user_mcsafe() exception handling
lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe()
lib/iov_iter: Document _copy_to_iter_flushcache()
lib/iov_iter: Document _copy_to_iter_mcsafe()
objtool: Use '.strtab' if '.shstrtab' doesn't exist, to support ORC tables on Clang
Add new channel type support for phase.
This channel may be used by Time-of-flight sensors to express the
phase difference between emitted and received signals. Those sensor
will then use the phase shift of return signals to approximate the
distance to objects.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-07-20
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add sharing of BPF objects within one ASIC: this allows for reuse of
the same program on multiple ports of a device, and therefore gains
better code store utilization. On top of that, this now also enables
sharing of maps between programs attached to different ports of a
device, from Jakub.
2) Cleanup in libbpf and bpftool's Makefile to reduce unneeded feature
detections and unused variable exports, also from Jakub.
3) First batch of RCU annotation fixes in prog array handling, i.e.
there are several __rcu markers which are not correct as well as
some of the RCU handling, from Roman.
4) Two fixes in BPF sample files related to checking of the prog_cnt
upper limit from sample loader, from Dan.
5) Minor cleanup in sockmap to remove a set but not used variable,
from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The -S (system summary) option failed to print any data on a 1-processor system.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
I noticed the "--version" option of the llvm-objcopy command has recently
disappeared from the master llvm branch. It is currently used as a BTF
support test in tools/testing/selftests/bpf/Makefile.
This patch replaces it with "--help" which should be
less error prone in the future.
Fixes: c0fa1b6c3e ("bpf: btf: Add BTF tests")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Arguments of 'pin' subcommand should be checked
at the very beginning of do_pin_any().
Otherwise segfault errors can occur when using
'map pin' or 'prog pin' commands, so fix it.
# bpftool prog pin id
Segmentation fault
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This logic was shared between multiple tests, but now that we have
removed all but one of them we can just move it into that test.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paste on POWER9 only works to accelerators and not on real memory. So
these tests just generate a SIGILL.
So just delete them.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a test of the ISA 3.0 "copy" instruction. That instruction has
an L field, which if set to 1 specifies that "the instruction
identifies the beginning of a move group" (pp 858). That's also
referred to as "copy first" vs "copy".
In ISA 3.0B the copy instruction does not have an L field, and the
corresponding bit in the instruction must be set to 1.
This test is generating a "copy" instruction, not a "copy first", and
so on Power9 (which implements 3.0B), this results in an illegal
instruction.
So just drop the test entirely. We still have copy_first_unaligned to
test the "copy first" behaviour.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We currently do not have such a test case in test_verifier selftests
but it's important to test under bpf_jit_enable=1 to make sure JIT
implementations do not mistakenly mess with src/dst reg for xadd/{w,dw}.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from David Miller:
"Lots of fixes, here goes:
1) NULL deref in qtnfmac, from Gustavo A. R. Silva.
2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih.
3) Lost completion messages in AF_XDP, from Magnus Karlsson.
4) Correct bogus self-assignment in rhashtable, from Rishabh
Bhatnagar.
5) Fix regression in ipv6 route append handling, from David Ahern.
6) Fix masking in __set_phy_supported(), from Heiner Kallweit.
7) Missing module owner set in x_tables icmp, from Florian Westphal.
8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire.
9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy.
10) Fix NULL deref when using chains in act_csum, from Davide Caratti.
11) XDP_REDIRECT needs to check if the interface is up and whether the
MTU is sufficient. From Toshiaki Makita.
12) Net diag can do a double free when killing TCP_NEW_SYN_RECV
connections, from Lorenzo Colitti.
13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a
full minute, delaying device unregister. From Eric Dumazet.
14) Update MAC entries in the correct order in ixgbe, from Alexander
Duyck.
15) Don't leave partial mangles bpf program in jit_subprogs, from
Daniel Borkmann.
16) Fix pfmemalloc SKB state propagation, from Stefano Brivio.
17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng.
18) Use after free in tun XDP_TX, from Toshiaki Makita.
19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole.
20) Don't reuse remainder of RX page when XDP is set in mlx4, from
Saeed Mahameed.
21) Fix window probe handling of TCP rapair sockets, from Stefan
Baranoff.
22) Missing socket locking in smc_ioctl(), from Ursula Braun.
23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann.
24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva.
25) Two spots in ipv6 do a rol32() on a hash value but ignore the
result. Fixes from Colin Ian King"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits)
tcp: identify cryptic messages as TCP seq # bugs
ptp: fix missing break in switch
hv_netvsc: Fix napi reschedule while receive completion is busy
MAINTAINERS: Drop inactive Vitaly Bordug's email
net: cavium: Add fine-granular dependencies on PCI
net: qca_spi: Fix log level if probe fails
net: qca_spi: Make sure the QCA7000 reset is triggered
net: qca_spi: Avoid packet drop during initial sync
ipv6: fix useless rol32 call on hash
ipv6: sr: fix useless rol32 call on hash
net: sched: Using NULL instead of plain integer
net: usb: asix: replace mii_nway_restart in resume path
net: cxgb3_main: fix potential Spectre v1
lib/rhashtable: consider param->min_size when setting initial table size
net/smc: reset recv timeout after clc handshake
net/smc: add error handling for get_user()
net/smc: optimize consumer cursor updates
net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.
ipv6: ila: select CONFIG_DST_CACHE
net: usb: rtl8150: demote allmulti message to dev_dbg()
...
Create initial unit tests for the tc fw filter.
Signed-off-by: Keara Leibovitz <kleib@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests for sharing programs and maps between different netdevs.
Use netdevsim's ability to pretend multiple netdevs belong to the
same "ASIC".
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Move bound program information from netdevsim to shared sub-object,
as programs will soon be shared between netdevs of the same ASIC.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS
to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
norm7 produces the 'normalized' name of a litmus test, when the test
can be generated from a single cycle that passes through each process
exactly once. The commit renames such tests in order to comply to the
naming scheme implemented by this tool.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/20180716180605.16115-14-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
b899a85043 ("compiler.h: Remove ACCESS_ONCE()")
... there has been no definition of ACCESS_ONCE() in the kernel tree,
and it has been necessary to use READ_ONCE() or WRITE_ONCE() instead.
Correspondingly, let's remove ACCESS_ONCE() from the kernel memory
model.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/20180716180605.16115-6-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
b899a85043 ("compiler.h: Remove ACCESS_ONCE()")
... there has been no definition of ACCESS_ONCE() in the kernel tree,
and it has been necessary to use READ_ONCE() or WRITE_ONCE() instead.
Let's update the exmaples in recipes.txt likewise for consistency, using
READ_ONCE() for reads.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/20180716180605.16115-5-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit adds a litmus test suggested by Alan Stern that is forbidden
on fully multicopy atomic systems, but allowed on other-multicopy and
on non-multicopy atomic systems. For reference, s390 is fully multicopy
atomic, x86 and ARMv8 are other-multicopy atomic, and ARMv7 and powerpc
are non-multicopy atomic.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/20180716180605.16115-1-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU updates from Paul E. McKenney:
- An optimization and a fix for RCU expedited grace periods, with
the fix being from Boqun Feng.
- Miscellaneous fixes, including a lockdep-annotation fix from
Boqun Feng.
- SRCU updates.
- Updates to rcutorture and associated scripting.
- Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt,
and RCU-sched flavors, replacing the old ->gpnum and ->completed
pair of fields. This change allows lockless code to obtain the
complete grace-period state with a single READ_ONCE(), which is
needed to maintain tolerable lock contention during the upcoming
consolidation of the three RCU flavors. Note that grace-period
sequence numbers are already used by rcu_barrier(), expedited
RCU grace periods, and SRCU, and are thus already heavily used
and well-tested. Joel Fernandes contributed a number of excellent
fixes and improvements.
- Clean up some grace-period-reporting loose ends, including
improving the handling of quiescent states from offline CPUs
and fixing some false-positive WARN_ON_ONCE() invocations.
(Strictly speaking, the WARN_ON_ONCE() invocations were quite
correct, but their invariants were (harmlessly) violated by the
earlier sloppy handling of quiescent states from offline CPUs.)
In addition, improve grace-period forward-progress guarantees so
as to allow removal of fail-safe checks that required otherwise
needless lock acquisitions. Finally, add more diagnostics to
help debug the upcoming consolidation of the RCU-bh, RCU-preempt,
and RCU-sched flavors.
- Additional miscellaneous fixes, including those contributed by
Byungchul Park, Mauro Carvalho Chehab, Joe Perches, Joel Fernandes,
Steven Rostedt, Andrea Parri, and Neil Brown.
- Additional torture-test changes, including several contributed by
Arnd Bergmann and Joel Fernandes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The tools/usb/ffs-test.c file defines cpu_to_le16/32 by using the C
library htole16/32 function calls. However, cpu_to_le16/32 are used when
initializing structures, i.e in a context where a function call is not
allowed.
It works fine on little endian systems because htole16/32 are defined by
the C library as no-ops. But on big-endian systems, they are actually
doing something, which might involve calling a function, causing build
failures, such as:
ffs-test.c:48:25: error: initializer element is not constant
#define cpu_to_le32(x) htole32(x)
^~~~~~~
ffs-test.c:128:12: note: in expansion of macro ‘cpu_to_le32’
.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2),
^~~~~~~~~~~
To solve this, we code cpu_to_le16/32 in a way that allows them to be
used when initializing structures. This fix was imported from
meta-openembedded/android-tools/fix-big-endian-build.patch written by
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>.
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
bpftool does not export features it probed for, i.e.
FEATURE_DUMP_EXPORT is always empty, so don't try to communicate
the features to libbpf. It has no effect.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for tls socket. Tests various iov and message options,
poll blocking and nonblocking behavior, partial message sends / receives,
and control message data. Tests should pass regardless of if TLS
is enabled in the kernel or not, and print a warning message if not.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the comments in the perf events code use articles incorrectly,
using 'a' for words beginning with a vowel sound, where 'an' should be
used.
Signed-off-by: Tobias Tefke <tobias.tefke@tutanota.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/20180709105715.22938-1-tobias.tefke@tutanota.com
[ Fix a few more perf related 'a event' typo fixes from all around the kernel and tooling tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-07-15
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Various different arm32 JIT improvements in order to optimize code emission
and make the JIT code itself more robust, from Russell.
2) Support simultaneous driver and offloaded XDP in order to allow for advanced
use-cases where some work is offloaded to the NIC and some to the host. Also
add ability for bpftool to load programs and maps beyond just the cgroup case,
from Jakub.
3) Add BPF JIT support in nfp for multiplication as well as division. For the
latter in particular, it uses the reciprocal algorithm to emulate it, from Jiong.
4) Add BTF pretty print functionality to bpftool in plain and JSON output
format, from Okash.
5) Add build and installation to the BPF helper man page into bpftool, from Quentin.
6) Add a TCP BPF callback for listening sockets which is triggered right after
the socket transitions to TCP_LISTEN state, from Andrey.
7) Add a new cgroup tree command to bpftool which iterates over the whole cgroup
tree and prints all attached programs, from Roman.
8) Improve xdp_redirect_cpu sample to support parsing of double VLAN tagged
packets, from Jesper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Cover new TCP-BPF callback in test_tcpbpf: when listen() is called on
socket, set BPF_SOCK_OPS_STATE_CB_FLAG so that BPF_SOCK_OPS_STATE_CB
callback can be called on future state transition, and when such a
transition happens (TCP_LISTEN -> TCP_CLOSE), track it in the map and
verify it in user space later.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reduce amount of copy/paste for debug info when result is verified in
the test and keep that info together with values being checked so that
they won't get out of sync.
It also improves debug experience: instead of checking manually what
doesn't match in debug output for all fields, only unexpected field is
printed.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Switch to cgroup_helpers to simplify the code and fix cgroup cleanup:
before cgroup was not cleaned up after the test.
It also removes SYSTEM macro, that only printed error, but didn't
terminate the test.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Clang puts its section header names in the '.strtab' section instead of
'.shstrtab', which causes objtool to fail with a "can't find
.shstrtab section" warning when attempting to write ORC metadata to an
object file.
If '.shstrtab' doesn't exist, use '.strtab' instead.
Signed-off-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d1c1c3fe55872be433da7bc5e1860538506229ba.1531153015.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ganapatrao Kulkarni