There is a deadlock in rr_close(), which is shown below:
(Thread 1) | (Thread 2)
| rr_open()
rr_close() | add_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rr_timer()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold rrpriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need rrpriv->lock in position (2) of thread 2.
As a result, rr_close() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The init_systime() may be invoked in atomic state. We have observed the
following call trace when running "phc_ctl /dev/ptp0 set" on a Intel
Agilex board.
BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
[<ffff80000892ef78>] stmmac_set_time+0x34/0x8c
CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-20220414-yocto-standard+ #567
Hardware name: SoCFPGA Agilex SoCDK (DT)
Call trace:
dump_backtrace.part.0+0xc4/0xd0
show_stack+0x24/0x40
dump_stack_lvl+0x7c/0xa0
dump_stack+0x18/0x34
__might_resched+0x154/0x1c0
__might_sleep+0x58/0x90
init_systime+0x78/0x120
stmmac_set_time+0x64/0x8c
ptp_clock_settime+0x60/0x9c
pc_clock_settime+0x6c/0xc0
__arm64_sys_clock_settime+0x88/0xf0
invoke_syscall+0x5c/0x130
el0_svc_common.constprop.0+0x4c/0x100
do_el0_svc+0x7c/0xa0
el0_svc+0x58/0xcc
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x18c/0x190
So we should use readl_poll_timeout_atomic() here instead of
readl_poll_timeout().
Also adjust the delay time to 10us to fix a "__bad_udelay" build error
reported by "kernel test robot <lkp@intel.com>". I have tested this on
Intel Agilex and NXP S32G boards, there is no delay needed at all.
So the 10us delay should be long enough for most cases.
Fixes: ff8ed73786 ("net: stmmac: use readl_poll_timeout() function in init_systime()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the user runs:
bridge link set dev $br_port mcast_flood on
this command should affect not only L2 multicast, but also IPv4 and IPv6
multicast.
In the Ocelot switch, unknown multicast gets flooded according to
different PGIDs according to its type, and PGID_MC only handles L2
multicast. Therefore, by leaving PGID_MCIPV4 and PGID_MCIPV6 at their
default value of 0, unknown IP multicast traffic is never flooded.
Fixes: 421741ea56 ("net: mscc: ocelot: offload bridge port flags to device")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220415151950.219660-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This will reset deeply on freeze and thaw instead of suspend and
resume and prevent null pointer dereferences of the uninitialized ring
0 buffer while thawing.
The impact is an indefinitely hanging kernel. You can't switch
consoles after this and the only possible user interaction is SysRq.
BUG: kernel NULL pointer dereference
RIP: 0010:aq_ring_rx_fill+0xcf/0x210 [atlantic]
aq_vec_init+0x85/0xe0 [atlantic]
aq_nic_init+0xf7/0x1d0 [atlantic]
atl_resume_common+0x4f/0x100 [atlantic]
pci_pm_thaw+0x42/0xa0
resolves in aq_ring.o to
```
0000000000000ae0 <aq_ring_rx_fill>:
{
/* ... */
baf: 48 8b 43 08 mov 0x8(%rbx),%rax
buff->flags = 0U; /* buff is NULL */
```
The bug has been present since the introduction of the new pm code in
8aaa112a57 ("net: atlantic: refactoring pm logic") and was hidden
until 8ce8427169 ("net: atlantic: changes for multi-TC support"),
which refactored the aq_vec_{free,alloc} functions into
aq_vec_{,ring}_{free,alloc}, but is technically not wrong. The
original functions just always reinitialized the buffers on S3/S4. If
the interface is down before freezing, the bug does not occur. It does
not matter, whether the initrd contains and loads the module before
thawing.
So the fix is to invert the boolean parameter deep in all pm function
calls, which was clearly intended to be set like that.
First report was on Github [1], which you have to guess from the
resume logs in the posted dmesg snippet. Recently I posted one on
Bugzilla [2], since I did not have an AQC device so far.
#regzbot introduced: 8ce8427169
#regzbot from: koo5 <kolman.jindrich@gmail.com>
#regzbot monitor: https://github.com/Aquantia/AQtion/issues/32
Fixes: 8aaa112a57 ("net: atlantic: refactoring pm logic")
Link: https://github.com/Aquantia/AQtion/issues/32 [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215798 [2]
Cc: stable@vger.kernel.org
Reported-by: koo5 <kolman.jindrich@gmail.com>
Signed-off-by: Manuel Ullmann <labre@posteo.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b5f862180d was introduced to discard lowest hash bit for layer3+4 hashing
but it also removes last bit from non layer3+4 hashing
Below script shows layer2+3 hashing will result in same slave to be used with above commit.
$ cat hash.py
#/usr/bin/python3.6
h_dests=[0xa0, 0xa1]
h_source=0xe3
hproto=0x8
saddr=0x1e7aa8c0
daddr=0x17aa8c0
for h_dest in h_dests:
hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
hash ^= hash >> 16
hash ^= hash >> 8
print(hash)
print("with last bit removed")
for h_dest in h_dests:
hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
hash ^= hash >> 16
hash ^= hash >> 8
hash = hash >> 1
print(hash)
Output:
$ python3.6 hash.py
522133332
522133333 <-------------- will result in both slaves being used
with last bit removed
261066666
261066666 <-------------- only single slave used
Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido reported that the commit referenced in the Fixes tag broke
a gre use case with dummy devices. Add a check to ip_tunnel_init_flow
to see if the oif is an l3mdev port and if so set the oif to 0 to
avoid the oif comparison in fib_lookup_good_nhc.
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-13
This series contains updates to igc and e1000e drivers.
Sasha removes waiting for hardware semaphore as it could cause an
infinite loop and changes usleep_range() calls done under atomic
context to udelay() for igc. For e1000e, he changes some variables from
u16 to u32 to prevent possible overflow of values.
Vinicius disables PTM when going to suspend as it is causing hang issues
on some platforms for igc.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Fix possible overflow in LTR decoding
igc: Fix suspending when PTM is active
igc: Fix BUG: scheduling while atomic
igc: Fix infinite loop in release_swfw_sync
====================
Link: https://lore.kernel.org/r/20220413170814.2066855-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The displayed list of Ethernet devices in make menuconfig
has gotten out of order. This is mostly due to changes in vendor
names etc, but also because of new Microsoft entry in wrong place.
This restores so that the display is in order even if the names
of the sub directories are not.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-14
This series contains updates to ice driver only.
Maciej adjusts implementation in __ice_alloc_rx_bufs_zc() for when
ice_fill_rx_descs() does not return the entire buffer request and fixes a
return value for !CONFIG_NET_SWITCHDEV configuration which was preventing
VF creation.
Wojciech prevents eswitch transmit when VFs are being removed which was
causing NULL pointer dereference.
Jianglei Nie fixes a memory leak on error path of getting OROM data.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Added the phy_poll_cable_test flag for the lan937x phy driver.
Tested using command - ethtool --cable-test <dev>
Fixes: 680baca546 ("net: phy: added the LAN937x phy support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter.
Current release - regressions:
- smc: fix af_ops of child socket pointing to released memory
- wifi: ath9k: fix usage of driver-private space in tx_info
Previous releases - regressions:
- ipv6: fix panic when forwarding a pkt with no in6 dev
- sctp: use the correct skb for security_sctp_assoc_request
- smc: fix NULL pointer dereference in smc_pnet_find_ib()
- sched: fix initialization order when updating chain 0 head
- phy: don't defer probe forever if PHY IRQ provider is missing
- dsa: revert "net: dsa: setup master before ports"
- dsa: felix: fix tagging protocol changes with multiple CPU ports
- eth: ice:
- fix use-after-free when freeing @rx_cpu_rmap
- revert "iavf: fix deadlock occurrence during resetting VF interface"
- eth: lan966x: stop processing the MAC entry is port is wrong
Previous releases - always broken:
- sched
- flower: fix parsing of ethertype following VLAN header
- taprio: check if socket flags are valid
- nfc: add flush_workqueue to prevent uaf
- veth: ensure eth header is in skb's linear part
- eth: stmmac: fix altr_tse_pcs function when using a fixed-link
- eth: macb: restart tx only if queue pointer is lagging
- eth: macvlan: fix leaking skb in source mode with nodst option
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ha9M
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter.
Current release - regressions:
- smc: fix af_ops of child socket pointing to released memory
- wifi: ath9k: fix usage of driver-private space in tx_info
Previous releases - regressions:
- ipv6: fix panic when forwarding a pkt with no in6 dev
- sctp: use the correct skb for security_sctp_assoc_request
- smc: fix NULL pointer dereference in smc_pnet_find_ib()
- sched: fix initialization order when updating chain 0 head
- phy: don't defer probe forever if PHY IRQ provider is missing
- dsa: revert "net: dsa: setup master before ports"
- dsa: felix: fix tagging protocol changes with multiple CPU ports
- eth: ice:
- fix use-after-free when freeing @rx_cpu_rmap
- revert "iavf: fix deadlock occurrence during resetting VF
interface"
- eth: lan966x: stop processing the MAC entry is port is wrong
Previous releases - always broken:
- sched:
- flower: fix parsing of ethertype following VLAN header
- taprio: check if socket flags are valid
- nfc: add flush_workqueue to prevent uaf
- veth: ensure eth header is in skb's linear part
- eth: stmmac: fix altr_tse_pcs function when using a fixed-link
- eth: macb: restart tx only if queue pointer is lagging
- eth: macvlan: fix leaking skb in source mode with nodst option"
* tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"
rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies
net: dsa: felix: fix tagging protocol changes with multiple CPU ports
tun: annotate access to queue->trans_start
nfc: nci: add flush_workqueue to prevent uaf
net: dsa: realtek: don't parse compatible string for RTL8366S
net: dsa: realtek: fix Kconfig to assure consistent driver linkage
net: ftgmac100: access hardware register after clock ready
Revert "net: dsa: setup master before ports"
macvlan: Fix leaking skb in source mode with nodst option
netfilter: nf_tables: nft_parse_register can return a negative value
net: lan966x: Stop processing the MAC entry is port is wrong.
net: lan966x: Fix when a port's upper is changed.
net: lan966x: Fix IGMP snooping when frames have vlan tag
net: lan966x: Update lan966x_ptp_get_nominal_value
sctp: Initialize daddr on peeled off socket
net/smc: Fix af_ops of child socket pointing to released memory
net/smc: Fix NULL pointer dereference in smc_pnet_find_ib()
net/smc: use memcpy instead of snprintf to avoid out of bounds read
net: macb: Restart tx only if queue pointer is lagging
...
A memory chunk was allocated for orom_data in ice_get_orom_civd_data()
by vzmalloc(). But when ice_read_flash_module() fails, the allocated
memory is not freed, which will lead to a memory leak.
We can fix it by freeing the orom_data when ce_read_flash_module() fails.
Fixes: af18d8866c ("ice: reduce time to read Option ROM CIVD data")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently for !CONFIG_NET_SWITCHDEV kernel builds it is not possible to
create VFs properly as call to ice_eswitch_configure() returns
-EOPNOTSUPP for us. This is because CONFIG_ICE_SWITCHDEV depends on
CONFIG_NET_SWITCHDEV.
Change the ice_eswitch_configure() implementation for
!CONFIG_ICE_SWITCHDEV to return 0 instead -EOPNOTSUPP and let
ice_ena_vfs() finish its work properly.
CC: Grzegorz Nitka <grzegorz.nitka@intel.com>
Fixes: 1a1c40df2e ("ice: set and release switchdev environment")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
__ice_alloc_rx_bufs_zc() checks if a number of the descriptors to be
allocated would cause the ring wrap. In that case, driver will issue two
calls to xsk_buff_alloc_batch() - one that will fill the ring up to the
end and the second one that will start with filling descriptors from the
beginning of the ring.
ice_fill_rx_descs() is a wrapper for taking care of what
xsk_buff_alloc_batch() gave back to the driver. It works in a best
effort approach, so for example when driver asks for 64 buffers,
ice_fill_rx_descs() could assign only 32. Such case needs to be checked
when ring is being filled up to the end, because in that situation ntu
might not reached the end of the ring.
Fix the ring wrap by checking if nb_buffs_extra has the expected value.
If not, bump ntu and go directly to tail update.
Fixes: 3876ff525d ("ice: xsk: Handle SW XDP ring wrap and bump tail more often")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the device tree has 2 CPU ports defined, a single one is active
(has any dp->cpu_dp pointers point to it). Yet the second one is still a
CPU port, and DSA still calls ->change_tag_protocol on it.
On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the
active CPU port and port 5 is inactive.
After the following commands:
# Initial setting
cat /sys/class/net/eno2/dsa/tagging
ocelot
echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
echo ocelot > /sys/class/net/eno2/dsa/tagging
traffic is now broken, because the driver has moved the NPI port from
port 4 to port 5, unbeknown to DSA.
The problem can be avoided by detecting that the second CPU port is
unused, and not doing anything for it. Further rework will be needed
when proper support for multiple CPU ports is added.
Treat this as a bug and prepare current kernels to work in single-CPU
mode with multiple-CPU DT blobs.
Fixes: adb3dccf09 ("net: dsa: felix: convert to the new .change_tag_protocol DSA API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 5337824f4d ("net: annotate accesses to queue->trans_start")
introduced a new helper, txq_trans_cond_update, to update
queue->trans_start using WRITE_ONCE. One snippet in drivers/net/tun.c
was missed, as it was introduced roughly at the same time.
Fixes: 5337824f4d ("net: annotate accesses to queue->trans_start")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220412135852.466386-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When we decode the latency and the max_latency, u16 value may not fit
the required size and could lead to the wrong LTR representation.
Scaling is represented as:
scale 0 - 1 (2^(5*0)) = 2^0
scale 1 - 32 (2^(5 *1))= 2^5
scale 2 - 1024 (2^(5 *2)) =2^10
scale 3 - 32768 (2^(5 *3)) =2^15
scale 4 - 1048576 (2^(5 *4)) = 2^20
scale 5 - 33554432 (2^(5 *4)) = 2^25
scale 4 and scale 5 required 20 and 25 bits respectively.
scale 6 reserved.
Replace the u16 type with the u32 type and allow corrected LTR
representation.
Cc: stable@vger.kernel.org
Fixes: 44a13a5d99 ("e1000e: Fix the max snoop/no-snoop latency for 10M")
Reported-by: James Hutchinson <jahutchinson99@googlemail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Tested-by: James Hutchinson <jahutchinson99@googlemail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some mainboard/CPU combinations, in particular, Alder Lake-S with a
W680 mainboard, have shown problems (system hangs usually, no kernel
logs) with suspend/resume when PCIe PTM is enabled and active. In some
cases, it could be reproduced when removing the igc module.
The best we can do is to stop PTM dialogs from the downstream/device
side before the interface is brought down. PCIe PTM will be re-enabled
when the interface is being brought up.
Fixes: a90ec84837 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
An infinite loop may occur if we fail to acquire the HW semaphore,
which is needed for resource release.
This will typically happen if the hardware is surprise-removed.
At this stage there is nothing to do, except log an error and quit.
Fixes: c0071c7aa5 ("igc: Add HW initialization code")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This switch is not even supported, but if someone were to actually put
this compatible string "realtek,rtl8366s" in their device tree, they
would be greeted with a kernel panic because the probe function would
dereference NULL. So let's just remove it.
Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel test robot reported a build failure:
or1k-linux-ld: drivers/net/dsa/realtek/realtek-smi.o:(.rodata+0x16c): undefined reference to `rtl8366rb_variant'
... with the following build configuration:
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=m
The problem here is that the realtek-smi interface driver gets built-in,
while the rtl8366rb switch subdriver gets built as a module, hence the
symbol rtl8366rb_variant is not reachable when defining the OF device
table in the interface driver.
The Kconfig dependencies don't help in this scenario because they just
say that the subdriver(s) depend on at least one interface driver. In
fact, the subdrivers don't depend on the interface drivers at all, and
can even be built even in their absence. Somewhat strangely, the
interface drivers can also be built in the absence of any subdriver,
BUT, if a subdriver IS enabled, then it must be reachable according to
the linkage of the interface driver: effectively what the IS_REACHABLE()
macro achieves. If it is not reachable, the above kind of linker error
will be observed.
Rather than papering over the above build error by simply using
IS_REACHABLE(), we can do a little better and admit that it is actually
the interface drivers that have a dependency on the subdrivers. So this
patch does exactly that. Specifically, we ensure that:
1. The interface drivers' Kconfig symbols must have a value no greater
than the value of any subdriver Kconfig symbols.
2. The subdrivers should by default enable both interface drivers, since
most users probably want at least one of them; those interface
drivers can be explicitly disabled however.
What this doesn't do is prevent a user from building only a subdriver,
without any interface driver. To that end, add an additional line of
help in the menu to guide users in the right direction.
Link: https://lore.kernel.org/all/202204110757.XIafvVnj-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: aac9400106 ("net: dsa: realtek: add new mdio interface for drivers")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
First set of fixes for v5.18. Maintainers file updates, two
compilation warning fixes, one revert for ath11k and smaller fixes to
drivers and stack. All the usual stuff.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmJWb5kRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvaZQgAlgXICEUZSq711XeKLMZ5Rv6z532ejcmT
hrgL8Dzru8NEx/+tdPwX/uhdUAzkwk0C7QwkbpzifE1nrQaqMwVFlKr2q0K43qeJ
xZoHCiMdShsClBlK9a/jZsa5/fnHFF9Pa0rNxCHGjQ46gRhkkwzf6fv722z/Zay9
MOKOv9+17Vrtpel2GlaMPsxRSQmzM4YSAbSfIz6HiUwt4VkuB2x9qxalHz7OfD27
fatWhwK1ZJui1tPRsB7dfrE8/0sg0t3Z2d7GarraFMCsaiCZRffYWz1OWy6P5ITo
8x4kgIewiggXBzpcsa8LQ9cleOE0gLZUdihJHgjWma3YX/tnns5Akg==
=hTYE
-----END PGP SIGNATURE-----
Merge tag 'wireless-2022-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.18
First set of fixes for v5.18. Maintainers file updates, two
compilation warning fixes, one revert for ath11k and smaller fixes to
drivers and stack. All the usual stuff.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
AST2600 MAC register 0x58 is writable only when the MAC clock is
enabled. Usually, the MAC clock is enabled by the bootloader so
register 0x58 is set normally when the bootloader is involved. To make
ast2600 ftgmac100 work without the bootloader, postpone the register
write until the clock is ready.
Fixes: 137d23cea1 ("net: ftgmac100: Fix Aspeed ast2600 TX hang issue")
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MACVLAN receive handler clones skbs to all matching source MACVLAN
interfaces, before it passes the packet along to match on destination
based MACVLANs.
When using the MACVLAN nodst mode, passing the packet to destination based
MACVLANs is omitted and the handler returns with RX_HANDLER_CONSUMED.
However, the passed skb is not freed, leaking for any packet processed
with the nodst option.
Properly free the skb when consuming packets to fix that leak.
Fixes: 427f0c8c19 ("macvlan: Add nodst option to macvlan type source")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when getting a new MAC is learn, the HW generates an
interrupt. So then the SW will check the new entry and checks if it
arrived on a correct port. If it didn't just generate a warning.
But this could still crash the system. Therefore stop processing that
entry when an issue is seen.
Fixes: 5ccd66e01c ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On lan966x it is not allowed to have foreign interfaces under a bridge
which already contains lan966x ports. So when a port leaves the bridge
it would call switchdev_bridge_port_unoffload which eventually will
notify the other ports that bridge left the vlan group but that is not
true because the bridge is still part of the vlan group.
Therefore when a port leaves the bridge, stop generating replays because
already the HW cleared after itself and the other ports don't need to do
anything else.
Fixes: cf2f60897e ("net: lan966x: Add support to offload the forwarding.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case an IGMP frame has a vlan tag, then the function
lan966x_hw_offload couldn't figure out that is a IGMP frame. Therefore
the SW thinks that the frame was already forward by the HW which is not
true.
Extend lan966x_hw_offload to pop the vlan tag if are any and then check
for IGMP frames.
Fixes: 47aeea0d57 ("net: lan966x: Implement the callback SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED ")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The clk_per_cfg register represents the value added to the system clock
for each clock cycle. The issue is that the default value is wrong,
meaning that in case the DUT was a grandmaster then everone in the
network was too slow. In case there was a grandmaster, then there is no
issue because the DUT will configure clk_per_cfg register based on the
master frequency.
Fixes: d096459494 ("net: lan966x: Add support for ptp clocks")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-08
Alexander fixes a use after free issue with aRFS for ice driver.
Mateusz reverts a commit that introduced issues related to device
resets for iavf driver.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
Revert "iavf: Fix deadlock occurrence during resetting VF interface"
ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
====================
Link: https://lore.kernel.org/r/20220408163411.2415552-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit 4298388574 ("net: macb: restart tx after tx used bit read")
added support for restarting transmission. Restarting tx does not work
in case controller asserts TXUBR interrupt and TQBP is already at the end
of the tx queue. In that situation, restarting tx will immediately cause
assertion of another TXUBR interrupt. The driver will end up in an infinite
interrupt loop which it cannot break out of.
For cases where TQBP is at the end of the tx queue, instead
only clear TX_USED interrupt. As more data gets pushed to the queue,
transmission will resume.
This issue was observed on a Xilinx Zynq-7000 based board.
During stress test of the network interface,
driver would get stuck on interrupt loop within seconds or minutes
causing CPU to stall.
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both of of_get_parent() and of_parse_phandle() return node pointer with
refcount incremented, use of_node_put() on it to decrease refcount
when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using a fixed-link, the altr_tse_pcs driver crashes
due to null-pointer dereference as no phy_device is provided to
tse_pcs_fix_mac_speed function. Fix this by adding a check for
phy_dev before calling the tse_pcs_fix_mac_speed() function.
Also clean up the tse_pcs_fix_mac_speed function a bit. There is
no need to check for splitter_base and sgmii_adapter_base
because the driver will fail if these 2 variables are not
derived from the device tree.
Fixes: fb3bbdb859 ("net: ethernet: Add TSE PCS support to dwmac-socfpga")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the T1 phy master/slave state is changed, at the end of config_aneg
function genphy_softreset is called. After the reset all the registers
configured during the config_init are restored to default value.
To avoid this, removed the genphy_softreset call.
v1->v2
------
Added the author in cc
Fixes: 8a1b415d70 ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ieee80211_tx_info_clear_status() helper also clears the rate counts and
the driver-private part of struct ieee80211_tx_info, so using it breaks
quite a few other things. So back out of using it, and instead define a
ath-internal helper that only clears the area between the
status_driver_data and the rates info. Combined with moving the
ath_frame_info struct to status_driver_data, this avoids clearing anything
we shouldn't be, and so we can keep the existing code for handling the rate
information.
While fixing this I also noticed that the setting of
tx_info->status.rates[tx_rateindex].count on hardware underrun errors was
always immediately overridden by the normal setting of the same fields, so
rearrange the code so that the underrun detection actually takes effect.
The new helper could be generalised to a 'memset_between()' helper, but
leave it as a driver-internal helper for now since this needs to go to
stable.
Cc: stable@vger.kernel.org
Reported-by: Peter Seiderer <ps.report@gmx.net>
Fixes: 037250f0a4 ("ath9k: Properly clear TX status area before reporting to mac80211")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220404204800.2681133-1-toke@toke.dk
Fix:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant
case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17):
^~~~
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant
case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13):
^~~~
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: netdev@vger.kernel.org
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic
Fix:
drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Shayne Chen <shayne.chen@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220405151517.29753-9-bp@alien8.de
UBSAN warnings are observed on atlantic driver:
[ 294.432996] UBSAN: array-index-out-of-bounds in /build/linux-Qow4fL/linux-5.15.0/drivers/net/ethernet/aquantia/atlantic/aq_nic.c:484:48
[ 294.433695] index 8 is out of range for type 'aq_vec_s *[8]'
The ring is dereferenced right before breaking out the loop, to prevent
that from happening, only use the index in the loop to fix the issue.
BugLink: https://bugs.launchpad.net/bugs/1958770
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20220408022204.16815-1-kai.heng.feng@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DSA master might not have been probed yet in which case the probe of
the felix switch fails with -EPROBE_DEFER:
[ 4.435305] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517
It is not an error. Use dev_err_probe() to demote this particular error
to a debug message.
Fixes: 5605194877 ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220408101521.281886-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a driver for an interrupt controller is missing, of_irq_get()
returns -EPROBE_DEFER ad infinitum, causing
fwnode_mdiobus_phy_device_register(), and ultimately, the entire
of_mdiobus_register() call, to fail. In turn, any phy_connect() call
towards a PHY on this MDIO bus will also fail.
This is not what is expected to happen, because the PHY library falls
back to poll mode when of_irq_get() returns a hard error code, and the
MDIO bus, PHY and attached Ethernet controller work fine, albeit
suboptimally, when the PHY library polls for link status. However,
-EPROBE_DEFER has special handling given the assumption that at some
point probe deferral will stop, and the driver for the supplier will
kick in and create the IRQ domain.
Reasons for which the interrupt controller may be missing:
- It is not yet written. This may happen if a more recent DT blob (with
an interrupt-parent for the PHY) is used to boot an old kernel where
the driver didn't exist, and that kernel worked with the
vintage-correct DT blob using poll mode.
- It is compiled out. Behavior is the same as above.
- It is compiled as a module. The kernel will wait for a number of
seconds specified in the "deferred_probe_timeout" boot parameter for
user space to load the required module. The current default is 0,
which times out at the end of initcalls. It is possible that this
might cause regressions unless users adjust this boot parameter.
The proposed solution is to use the driver_deferred_probe_check_state()
helper function provided by the driver core, which gives up after some
-EPROBE_DEFER attempts, taking "deferred_probe_timeout" into consideration.
The return code is changed from -EPROBE_DEFER into -ENODEV or
-ETIMEDOUT, depending on whether the kernel is compiled with support for
modules or not.
Fixes: 66bdede495 ("of_mdio: Fix broken PHY IRQ in case of probe deferral")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220407165538.4084809-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Improve API to make it clear that mmc_hw_reset() is for cards
- Fixup support for writeback-cache for eMMC and SD
- Check for errors after writes on SPI
MMC host:
- renesas_sdhi: A couple of fixes of TAP settings for eMMC HS400 mode
- mmci_stm32: Fixup check of all elements in sg list
- sdhci-xenon: Revert unnecessary fix for annoying 1.8V regulator warning
-----BEGIN PGP SIGNATURE-----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=MC9g
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve API to make it clear that mmc_hw_reset() is for cards
- Fixup support for writeback-cache for eMMC and SD
- Check for errors after writes on SPI
MMC host:
- renesas_sdhi: A couple of fixes of TAP settings for eMMC HS400 mode
- mmci_stm32: Fixup check of all elements in sg list
- sdhci-xenon: Revert unnecessary fix for annoying 1.8V regulator warning"
* tag 'mmc-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: improve API to make clear mmc_hw_reset is for cards
mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete
mmc: renesas_sdhi: special 4tap settings only apply to HS400
mmc: core: Fixup support for writeback-cache for eMMC and SD
mmc: block: Check for errors after write on SPI
mmc: mmci: stm32: correctly check all elements of sg list
Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"
This change caused a regression with resetting while changing network
namespaces. By clearing the IFF_UP flag, the kernel now thinks it has
fully closed the device.
This reverts commit 0cc318d2e8.
Fixes: 0cc318d2e8 ("iavf: Fix deadlock occurrence during resetting VF interface")
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The CI testing bots triggered the following splat:
[ 718.203054] BUG: KASAN: use-after-free in free_irq_cpu_rmap+0x53/0x80
[ 718.206349] Read of size 4 at addr ffff8881bd127e00 by task sh/20834
[ 718.212852] CPU: 28 PID: 20834 Comm: sh Kdump: loaded Tainted: G S W IOE 5.17.0-rc8_nextqueue-devqueue-02643-g23f3121aca93 #1
[ 718.219695] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0012.070720200218 07/07/2020
[ 718.223418] Call Trace:
[ 718.227139]
[ 718.230783] dump_stack_lvl+0x33/0x42
[ 718.234431] print_address_description.constprop.9+0x21/0x170
[ 718.238177] ? free_irq_cpu_rmap+0x53/0x80
[ 718.241885] ? free_irq_cpu_rmap+0x53/0x80
[ 718.245539] kasan_report.cold.18+0x7f/0x11b
[ 718.249197] ? free_irq_cpu_rmap+0x53/0x80
[ 718.252852] free_irq_cpu_rmap+0x53/0x80
[ 718.256471] ice_free_cpu_rx_rmap.part.11+0x37/0x50 [ice]
[ 718.260174] ice_remove_arfs+0x5f/0x70 [ice]
[ 718.263810] ice_rebuild_arfs+0x3b/0x70 [ice]
[ 718.267419] ice_rebuild+0x39c/0xb60 [ice]
[ 718.270974] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 718.274472] ? ice_init_phy_user_cfg+0x360/0x360 [ice]
[ 718.278033] ? delay_tsc+0x4a/0xb0
[ 718.281513] ? preempt_count_sub+0x14/0xc0
[ 718.284984] ? delay_tsc+0x8f/0xb0
[ 718.288463] ice_do_reset+0x92/0xf0 [ice]
[ 718.292014] ice_pci_err_resume+0x91/0xf0 [ice]
[ 718.295561] pci_reset_function+0x53/0x80
<...>
[ 718.393035] Allocated by task 690:
[ 718.433497] Freed by task 20834:
[ 718.495688] Last potentially related work creation:
[ 718.568966] The buggy address belongs to the object at ffff8881bd127e00
which belongs to the cache kmalloc-96 of size 96
[ 718.574085] The buggy address is located 0 bytes inside of
96-byte region [ffff8881bd127e00, ffff8881bd127e60)
[ 718.579265] The buggy address belongs to the page:
[ 718.598905] Memory state around the buggy address:
[ 718.601809] ffff8881bd127d00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.604796] ffff8881bd127d80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
[ 718.607794] >ffff8881bd127e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.610811] ^
[ 718.613819] ffff8881bd127e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 718.617107] ffff8881bd127f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
This is due to that free_irq_cpu_rmap() is always being called
*after* (devm_)free_irq() and thus it tries to work with IRQ descs
already freed. For example, on device reset the driver frees the
rmap right before allocating a new one (the splat above).
Make rmap creation and freeing function symmetrical with
{request,free}_irq() calls i.e. do that on ifup/ifdown instead
of device probe/remove/resume. These operations can be performed
independently from the actual device aRFS configuration.
Also, make sure ice_vsi_free_irq() clears IRQ affinity notifiers
only when aRFS is disabled -- otherwise, CPU rmap sets and clears
its own and they must not be touched manually.
Fixes: 28bf26724f ("ice: Implement aRFS")
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When kmalloc and dst_cache_init failed,
should return ENOMEM rather than ENOBUFS.
Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After feeding a decapsulated packet to a veth device with act_mirred,
skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(),
which expects at least ETH_HLEN byte of linear data (as
__dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes
unconditionally).
Use pskb_may_pull() to ensure veth_xmit() respects this constraint.
kernel BUG at include/linux/skbuff.h:2328!
RIP: 0010:eth_type_trans+0xcf/0x140
Call Trace:
<IRQ>
__dev_forward_skb2+0xe3/0x160
veth_xmit+0x6e/0x250 [veth]
dev_hard_start_xmit+0xc7/0x200
__dev_queue_xmit+0x47f/0x520
? skb_ensure_writable+0x85/0xa0
? skb_mpls_pop+0x98/0x1c0
tcf_mirred_act+0x442/0x47e [act_mirred]
tcf_action_exec+0x86/0x140
fl_classify+0x1d8/0x1e0 [cls_flower]
? dma_pte_clear_level+0x129/0x1a0
? dma_pte_clear_level+0x129/0x1a0
? prb_fill_curr_block+0x2f/0xc0
? skb_copy_bits+0x11a/0x220
__tcf_classify+0x58/0x110
tcf_classify_ingress+0x6b/0x140
__netif_receive_skb_core.constprop.0+0x47d/0xfd0
? __iommu_dma_unmap_swiotlb+0x44/0x90
__netif_receive_skb_one_core+0x3d/0xa0
netif_receive_skb+0x116/0x170
be_process_rx+0x22f/0x330 [be2net]
be_poll+0x13c/0x370 [be2net]
__napi_poll+0x2a/0x170
net_rx_action+0x22f/0x2f0
__do_softirq+0xca/0x2a8
__irq_exit_rcu+0xc1/0xe0
common_interrupt+0x83/0xa0
Fixes: e314dbdc1c ("[NET]: Virtual ethernet device driver.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make it unambiguous that mmc_hw_reset() is for cards and not for
controllers, we make the function argument mmc_card instead of mmc_host.
Also, all users are converted.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408080045.6497-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Duoming Zhou