Commit Graph

15 Commits

Author SHA1 Message Date
Peter Zijlstra d5b0e0677b u64_stats,lockdep: Fix u64_stats_init() vs lockdep
Jakub reported that:

    static struct net_device *rtl8139_init_board(struct pci_dev *pdev)
    {
	    ...
	    u64_stats_init(&tp->rx_stats.syncp);
	    u64_stats_init(&tp->tx_stats.syncp);
	    ...
    }

results in lockdep getting confused between the RX and TX stats lock.
This is because u64_stats_init() is an inline calling seqcount_init(),
which is a macro using a static variable to generate a lockdep class.

By wrapping that in an inline, we negate the effect of the macro and
fold the static key variable, hence the confusion.

Fix by also making u64_stats_init() a macro for the case where it
matters, leaving the other case an inline for argument validation
etc.

Reported-by: Jakub Kicinski <kuba@kernel.org>
Debugged-by: "Ahmed S. Darwish" <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Link: https://lkml.kernel.org/r/YEXicy6+9MksdLZh@hirez.programming.kicks-ass.net
2021-03-10 09:51:45 +01:00
Ahmed S. Darwish 6501bf8760 u64_stats: Document writer non-preemptibility requirement
The u64_stats mechanism uses sequence counters to protect against 64-bit
values tearing on 32-bit architectures. Updating such statistics is a
sequence counter write side critical section.

Preemption must be disabled before entering this seqcount write critical
section.  Failing to do so, the seqcount read side can preempt the write
side section and spin for the entire scheduler tick.  If that reader
belongs to a real-time scheduling class, it can spin forever and the
kernel will livelock.

Document this statistics update side non-preemptibility requirement.

Reword the introductory paragraph to highlight u64_stats raison d'être:
64-bit values tearing protection on 32-bit architectures. Divide
documentation on a basis of internal design vs. usage constraints.

Reword the u64_stats header file top comment to always mention "Reader"
or "Writer" at the start of each bullet point, making it easier to
follow which side each point is actually for.

Clarify the statement "whole thing is a NOOP on 64bit arches or UP
kernels".  For 32-bit UP kernels, preemption is always disabled for the
statistics read side section.

Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-04 15:50:42 -07:00
Eric Dumazet 316580b69d u64_stats: provide u64_stats_t type
On 64bit arches, struct u64_stats_sync is empty and provides
no help against load/store tearing.

Using READ_ONCE()/WRITE_ONCE() would be needed.

But the update side would be slightly more expensive.

local64_t was defined so that we could use regular adds
in a manner which is atomic wrt IRQs.

However the u64_stats infra means we do not have to use
local64_t on 32bit arches since the syncp provides the needed
protection.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07 20:03:08 -08:00
Anna-Maria Gleixner c36a68fab1 net: u64_stats_sync: Remove functions without user
Commit 67db3e4bfb ("tcp: no longer hold ehash lock while calling
tcp_get_info()") removes the only users of u64_stats_update_end/begin_raw()
without removing the function in header file.

Remove no longer used functions.

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:25:24 -04:00
Eric Dumazet 2695578b89 net: usbnet: fix potential deadlock on 32bit hosts
Marek reported a LOCKDEP issue occurring on 32bit host,
that we tracked down to the fact that usbnet could either
run from soft or hard irqs.

This patch adds u64_stats_update_begin_irqsave() and
u64_stats_update_end_irqrestore() helpers to solve this case.

[   17.768040] ================================
[   17.772239] WARNING: inconsistent lock state
[   17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted
[   17.783329] --------------------------------
[   17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[   17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[   17.798751]  (&syncp->seq#5){?.-.}, at: [<9b22e5f0>]
asix_rx_fixup_internal+0x188/0x288
[   17.806790] {IN-HARDIRQ-W} state was registered at:
[   17.811677]   tx_complete+0x100/0x208
[   17.815319]   __usb_hcd_giveback_urb+0x60/0xf0
[   17.819770]   xhci_giveback_urb_in_irq+0xa8/0x240
[   17.824469]   xhci_td_cleanup+0xf4/0x16c
[   17.828367]   xhci_irq+0xe74/0x2240
[   17.831827]   usb_hcd_irq+0x24/0x38
[   17.835343]   __handle_irq_event_percpu+0x98/0x510
[   17.840111]   handle_irq_event_percpu+0x1c/0x58
[   17.844623]   handle_irq_event+0x38/0x5c
[   17.848519]   handle_fasteoi_irq+0xa4/0x138
[   17.852681]   generic_handle_irq+0x18/0x28
[   17.856760]   __handle_domain_irq+0x6c/0xe4
[   17.860941]   gic_handle_irq+0x54/0xa0
[   17.864666]   __irq_svc+0x70/0xb0
[   17.867964]   arch_cpu_idle+0x20/0x3c
[   17.871578]   arch_cpu_idle+0x20/0x3c
[   17.875190]   do_idle+0x144/0x218
[   17.878468]   cpu_startup_entry+0x18/0x1c
[   17.882454]   start_kernel+0x394/0x400
[   17.886177] irq event stamp: 161912
[   17.889616] hardirqs last  enabled at (161912): [<7bedfacf>]
__netdev_alloc_skb+0xcc/0x140
[   17.897893] hardirqs last disabled at (161911): [<d58261d0>]
__netdev_alloc_skb+0x94/0x140
[   17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout
[   17.906116] softirqs last  enabled at (161904): [<387102ff>]
irq_enter+0x78/0x80
[   17.906123] softirqs last disabled at (161905): [<cf4c628e>]
irq_exit+0x134/0x158
[   17.925722].
[   17.925722] other info that might help us debug this:
[   17.933435]  Possible unsafe locking scenario:
[   17.933435].
[   17.940331]        CPU0
[   17.942488]        ----
[   17.944894]   lock(&syncp->seq#5);
[   17.948274]   <Interrupt>
[   17.950847]     lock(&syncp->seq#5);
[   17.954386].
[   17.954386]  *** DEADLOCK ***
[   17.954386].
[   17.962422] no locks held by swapper/0/0.

Fixes: c8b5d129ee ("net: usbnet: support 64bit stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07 11:46:39 -05:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Frederic Weisbecker 68107df5f2 u64_stats: Introduce IRQs disabled helpers
Introduce light versions of u64_stats helpers for context where
either preempt or IRQs are disabled. This way we can make this library
usable by scheduler irqtime accounting which currenty implement its
ad-hoc version.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1474849761-12678-4-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30 11:46:40 +02:00
Eric Dumazet 46cc6e4976 tcp: fix lockdep splat in tcp_snd_una_update()
tcp_snd_una_update() and tcp_rcv_nxt_update() call
u64_stats_update_begin() either from process context or BH handler.

This triggers a lockdep splat on 32bit & SMP builds.

We could add u64_stats_update_begin_bh() variant but this would
slow down 32bit builds with useless local_disable_bh() and
local_enable_bh() pairs, since we own the socket lock at this point.

I add sock_owned_by_me() helper to have proper lockdep support
even on 64bit builds, and new u64_stats_update_begin_raw()
and u64_stats_update_end_raw methods.

Fixes: c10d9310ed ("tcp: do not assume TCP code is non preemptible")
Reported-by: Fabio Estevam <festevam@gmail.com>
Diagnosed-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04 16:55:11 -04:00
Eric Dumazet 9464ca6500 net: make u64_stats_init() a function
Using a function instead of a macro is cleaner and remove
following W=1 warnings (extract)

In file included from net/ipv6/ip6_vti.c:29:0:
net/ipv6/ip6_vti.c: In function ‘vti6_dev_init_gen’:
include/linux/netdevice.h:2029:18: warning: variable ‘stat’ set but not
used [-Wunused-but-set-variable]
    typeof(type) *stat;   \
                  ^
net/ipv6/ip6_vti.c:862:16: note: in expansion of macro
‘netdev_alloc_pcpu_stats’
  dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
                ^
  CC [M]  net/ipv6/sit.o
In file included from net/ipv6/sit.c:30:0:
net/ipv6/sit.c: In function ‘ipip6_tunnel_init’:
include/linux/netdevice.h:2029:18: warning: variable ‘stat’ set but not
used [-Wunused-but-set-variable]
    typeof(type) *stat;   \
                  ^

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15 16:02:52 -07:00
Eric W. Biederman 57a7744e09 net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irq
Replace the bh safe variant with the hard irq safe variant.

We need a hard irq safe variant to deal with netpoll transmitting
packets from hard irq context, and we need it in most if not all of
the places using the bh safe variant.

Except on 32bit uni-processor the code is exactly the same so don't
bother with a bh variant, just have a hard irq safe variant that
everyone can use.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14 22:41:36 -04:00
John Stultz 827da44c61 net: Explicitly initialize u64_stats_sync structures for lockdep
In order to enable lockdep on seqcount/seqlock structures, we
must explicitly initialize any locks.

The u64_stats_sync structure, uses a seqcount, and thus we need
to introduce a u64_stats_init() function and use it to initialize
the structure.

This unfortunately adds a lot of fairly trivial initialization code
to a number of drivers. But the benefit of ensuring correctness makes
this worth while.

Because these changes are required for lockdep to be enabled, and the
changes are quite trivial, I've not yet split this patch out into 30-some
separate patches, as I figured it would be better to get the various
maintainers thoughts on how to best merge this change along with
the seqcount lockdep enablement.

Feedback would be appreciated!

Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mirko Lindner <mlindner@marvell.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Roger Luethi <rl@hellgate.ch>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Simon Horman <horms@verge.net.au>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Wensong Zhang <wensong@linux-vs.org>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06 12:40:25 +01:00
Jesper Juhl fa9f90be74 Kill off a bunch of warning: ‘inline’ is not at beginning of declaration
These warnings are spewed during a build of a 'allnoconfig' kernel
(especially the ones from u64_stats_sync.h show up a lot) when building
with -Wextra (which I often do)..
They are
  a) annoying
  b) easy to get rid of.
This patch kills them off.

include/linux/u64_stats_sync.h:70:1: warning: ‘inline’ is not at beginning of declaration
include/linux/u64_stats_sync.h:77:1: warning: ‘inline’ is not at beginning of declaration
include/linux/u64_stats_sync.h:84:1: warning: ‘inline’ is not at beginning of declaration
include/linux/u64_stats_sync.h:96:1: warning: ‘inline’ is not at beginning of declaration
include/linux/u64_stats_sync.h:115:1: warning: ‘inline’ is not at beginning of declaration
include/linux/u64_stats_sync.h:127:1: warning: ‘inline’ is not at beginning of declaration
kernel/time.c:241:1: warning: ‘inline’ is not at beginning of declaration
kernel/time.c:257:1: warning: ‘inline’ is not at beginning of declaration
kernel/perf_event.c:4513:1: warning: ‘inline’ is not at beginning of declaration
mm/page_alloc.c:4012:1: warning: ‘inline’ is not at beginning of declaration

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-28 23:08:04 +01:00
Eric Dumazet 33d91f00c7 net: u64_stats_fetch_begin_bh() and u64_stats_fetch_retry_bh()
- Must disable preemption in case of 32bit UP in u64_stats_fetch_begin()
and u64_stats_fetch_retry()

- Add new u64_stats_fetch_begin_bh() and u64_stats_fetch_retry_bh() for
network usage, disabling BH on 32bit UP only.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28 23:24:30 -07:00
Eric Dumazet b6b3ecc71a net: u64_stats_sync improvements
- Add a comment about interrupts:

6) If counter might be written by an interrupt, readers should block
interrupts.

- Fix a typo in sample of use.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28 23:24:29 -07:00
Eric Dumazet 16b8a4761c net: Introduce u64_stats_sync infrastructure
To properly implement 64bits network statistics on 32bit or 64bit hosts,
we provide one new type and four methods, to ease conversions.

Stats producer should use following template granted it already got an
exclusive access to counters (include/linux/u64_stats_sync.h contains
some documentation about details)

    u64_stats_update_begin(&stats->syncp);
    stats->bytes64 += len;
    stats->packets64++;
    u64_stats_update_end(&stats->syncp);

While a consumer should use following template to get consistent
snapshot :

    u64 tbytes, tpackets;
    unsigned int start;

    do {
        start = u64_stats_fetch_begin(&stats->syncp);
        tbytes = stats->bytes64;
        tpackets = stats->packets64;
    } while (u64_stats_fetch_retry(&stats->lock, syncp));

Suggested by David Miller, and comments courtesy of Nick Piggin.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23 12:59:47 -07:00