Another small refactoring.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace svm_vcpu_init_msrpm with svm_vcpu_alloc_msrpm, that also allocates
the msr bitmap and add svm_vcpu_free_msrpm to free it.
This will be used later to move the nested msr permission bitmap allocation
to nested.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is to be more consistient with VMX, and to support
upcoming addition of vmcb02
Hopefully no functional changes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'page' is to hold the vcpu's vmcb so name it as such to
avoid confusion.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200827171145.374620-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All the checks in lapic_timer_int_injected(), __kvm_wait_lapic_expire(), and
these function calls waste cpu cycles when the timer mode is not tscdeadline.
We can observe ~1.3% world switch time overhead by kvm-unit-tests/vmexit.flat
vmcall testing on AMD server. This patch reduces the world switch latency
caused by timer_advance_ns feature when the timer mode is not tscdeadline by
simpling move the check against apic->lapic_timer.expired_tscdeadline much
earlier.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-7-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kick after setting KVM_REQ_PENDING_TIMER is used to handle the timer
fires on a different pCPU which vCPU is running on. This kick costs about
1000 clock cycles and we don't need this when injecting already-expired
timer or when using the VMX preemption timer because
kvm_lapic_expired_hv_timer() is called from the target vCPU.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-6-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check apic_lvtt_tscdeadline() mode directly instead of apic_lvtt_oneshot()
and apic_lvtt_period() to guarantee the timer is in tsc-deadline mode when
wrmsr MSR_IA32_TSCDEADLINE.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-3-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return 0 when getting the tscdeadline timer if the lapic is hw disabled.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-2-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is missing apic map recalculation after updating DFR, if it is
INIT RESET, in x2apic mode, local apic is software enabled before.
This patch fix it by introducing the function kvm_apic_set_dfr() to
be called in INIT RESET handling path.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1597827327-25055-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The nested VMX controls MSRs can be initialized by the global capability
values stored in vmcs_config.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200828085622.8365-6-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM supports the nested VM_{EXIT, ENTRY}_LOAD_IA32_PERF_GLOBAL_CTRL and
VM_{ENTRY_LOAD, EXIT_CLEAR}_BNDCFGS, but they are not exposed by the
system ioctl KVM_GET_MSR. Add them to the setup of nested VMX controls MSR.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20200828085622.8365-2-chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The save and ctl pointers are passed uninitialized to kfree() when
svm_set_nested_state() follows the 'goto out_set_gif' path. While the
issue could've been fixed by initializing these on-stack varialbles to
NULL, it seems preferable to eliminate 'out_set_gif' label completely as
it is not actually a failure path and duplicating a single svm_set_gif()
call doesn't look too bad.
[ bp: Drop obscure Addresses-Coverity: tag. ]
Fixes: 6ccbd29ade ("KVM: SVM: nested: Don't allocate VMCB structures on stack")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Joerg Roedel <jroedel@suse.de>
Reported-by: Colin King <colin.king@canonical.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20200914133725.650221-1-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the architecture independent version of hyperv-tlfs.h, commit c55a844f46
removed the "X64" in the symbol names so they would make sense for both x86 and
ARM64. That commit added aliases with the "X64" in the x86 version of hyperv-tlfs.h
so that existing x86 code would continue to compile.
As a cleanup, update the x86 code to use the symbols without the "X64", then remove
the aliases. There's no functional change.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/1601130386-11111-1-git-send-email-jsalisbury@linux.microsoft.com
with a better API in 5.10 or 5.11, for now this is a fix
that works with existing userspace but keeps the current
ugly API.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9ufLMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMe9AgAgU3YQ2SktkqEOXjHMLqCH5Y3PKFI
S2anYpoKlH36Q6kzoqtkCj0GVagvdh5+Envz3I/tMdhv3Y/JgZaX1wHAe4cUl9BT
VyoiDBTWkhYRmpUbLYA8AtmgxQw1Hp8srH86rnvVGmLG6zdAa/rgUAKiQgT688Ej
CQvF5H7Zi3viPo2rInNSkgTIgewduqSWkwJ6+h4AQMmNJpbRaeZs45yMYyyu/FIi
hUazy7Rwk2vkWcuTd/sqH9b9y3VCYpN9juRaehEiK8qxXT3ydTU4Tub25BHmvXdr
dx5pShG4P3nAGnfV1qKAemyQcY7sjfMieqN1F3QcsRcxqZgySUm11o2JRw==
=sHsX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm fixes from Paolo Bonzini:
"Five small fixes.
The nested migration bug will be fixed with a better API in 5.10 or
5.11, for now this is a fix that works with existing userspace but
keeps the current ugly API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Add a dedicated INVD intercept routine
KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE
KVM: x86: fix MSR_IA32_TSC read for nested migration
selftests: kvm: Fix assert failure in single-step test
KVM: x86: VMX: Make smaller physical guest address space support user-configurable
The INVD instruction intercept performs emulation. Emulation can't be done
on an SEV guest because the guest memory is encrypted.
Provide a dedicated intercept routine for the INVD intercept. And since
the instruction is emulated as a NOP, just skip it instead.
Fixes: 1654efcbc4 ("KVM: SVM: Add KVM_SEV_INIT command")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <a0b9a19ffa7fef86a3cc700c7ea01cb2731e04e5.1600972918.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reset the MMU context during kvm_set_cr4() if SMAP or PKE is toggled.
Recent commits to (correctly) not reload PDPTRs when SMAP/PKE are
toggled inadvertantly skipped the MMU context reset due to the mask
of bits that triggers PDPTR loads also being used to trigger MMU context
resets.
Fixes: 427890aff8 ("kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode")
Fixes: cb957adb4e ("kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode")
Cc: Jim Mattson <jmattson@google.com>
Cc: Peter Shier <pshier@google.com>
Cc: Oliver Upton <oupton@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923215352.17756-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR reads/writes should always access the L1 state, since the (nested)
hypervisor should intercept all the msrs it wants to adjust, and these
that it doesn't should be read by the guest as if the host had read it.
However IA32_TSC is an exception. Even when not intercepted, guest still
reads the value + TSC offset.
The write however does not take any TSC offset into account.
This is documented in Intel's SDM and seems also to happen on AMD as well.
This creates a problem when userspace wants to read the IA32_TSC value and then
write it. (e.g for migration)
In this case it reads L2 value but write is interpreted as an L1 value.
To fix this make the userspace initiated reads of IA32_TSC return L1 value
as well.
Huge thanks to Dave Gilbert for helping me understand this very confusing
semantic of MSR writes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200921103805.9102-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch exposes allow_smaller_maxphyaddr to the user as a module parameter.
Since smaller physical address spaces are only supported on VMX, the
parameter is only exposed in the kvm_intel module.
For now disable support by default, and let the user decide if they want
to enable it.
Modifications to VMX page fault and EPT violation handling will depend
on whether that parameter is enabled.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Message-Id: <20200903141122.72908-1-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some hardware implementations, coherency between the encrypted and
unencrypted mappings of the same physical page in a VM is enforced. In
such a system, it is not required for software to flush the VM's page
from all CPU caches in the system prior to changing the value of the
C-bit for the page.
So check that bit before flushing the cache.
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200917212038.5090-4-krish.sadhukhan@oracle.com
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9dM5kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM+Iwf+LbISO7ccpPMK1kKtOeug/jZv+xQA
sVaBGRzYo+k2e0XtV8E8IV4N30FBtYSwXsbBKkMAoy2FpmMebgDWDQ7xspb6RJMS
/y8t1iqPwdOaLIkUkgc7UihSTlZm05Es3f3q6uZ9+oaM4Fe+V7xWzTUX4Oy89JO7
KcQsTD7pMqS4bfZGADK781ITR/WPgCi0aYx5s6dcwcZAQXhb1K1UKEjB8OGKnjUh
jliReJtxRA16rjF+S5aJ7L07Ce/ksrfwkI4NXJ4GxW+lyOfVNdSBJUBaZt1m7G2M
1We5+i5EjKCjuxmgtUUUfVdazpj1yl+gBGT7KKkLte9T9WZdXyDnixAbvg==
=OFb3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A bit on the bigger side, mostly due to me being on vacation, then
busy, then on parental leave, but there's nothing worrisome.
ARM:
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: emulator: more strict rsm checks.
KVM: nSVM: more strict SMM checks when returning to nested guest
SVM: nSVM: setup nested msr permission bitmap on nested state load
SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
x86/kvm: don't forget to ACK async PF IRQ
x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
KVM: SVM: avoid emulation with stale next_rip
KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
KVM: SVM: Periodically schedule when unregistering regions on destroy
KVM: MIPS: Change the definition of kvm type
kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
KVM: fix memory leak in kvm_io_bus_unregister_dev()
KVM: Check the allocation of pv cpu mask
KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
KVM: arm64: Update page shift if stage 2 block mapping not supported
KVM: arm64: Fix address truncation in traces
KVM: arm64: Do not try to map PUDs when they are folded into PMD
arm64/x86: KVM: Introduce steal-time cap
...
Don't ignore return values in rsm_load_state_64/32 to avoid
loading invalid state from SMM state area if it was tampered with
by the guest.
This is primarly intended to avoid letting guest set bits in EFER
(like EFER.SVME when nesting is disabled) by manipulating SMM save area.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* check that guest is 64 bit guest, otherwise the SVM related fields
in the smm state area are not defined
* If the SMM area indicates that SMM interrupted a running guest,
check that EFER.SVME which is also saved in this area is set, otherwise
the guest might have tampered with SMM save area, and so indicate
emulation failure which should triple fault the guest.
* Check that that guest CPUID supports SVM (due to the same issue as above)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code was missing and was forcing the L2 run with L1's msr
permission bitmap
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently code in svm_set_nested_state copies the current vmcb control
area to L1 control area (hsave->control), under assumption that
it mostly reflects the defaults that kvm choose, and later qemu
overrides these defaults with L2 state using standard KVM interfaces,
like KVM_SET_REGS.
However nested GIF (which is AMD specific thing) is by default is true,
and it is copied to hsave area as such.
This alone is not a big deal since on VMexit, GIF is always set to false,
regardless of what it was on VM entry. However in nested_svm_vmexit we
were first were setting GIF to false, but then we overwrite the control
fields with value from the hsave area. (including the nested GIF field
itself if GIF virtualization is enabled).
Now on normal vm entry this is not a problem, since GIF is usually false
prior to normal vm entry, and this is the value that copied to hsave,
and then restored, but this is not always the case when the nested state
is loaded as explained above.
To fix this issue, move svm_set_gif after we restore the L1 control
state in nested_svm_vmexit, so that even with wrong GIF in the
saved L1 control area, we still clear GIF as the spec says.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to SDM 27.2.4, Event delivery causes an APIC-access VM exit.
Don't report internal error and freeze guest when event delivery causes
an APIC-access exit, it is handleable and the event will be re-injected
during the next vmentry.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1597827327-25055-2-git-send-email-wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm->next_rip is reset in svm_vcpu_run() only after calling
svm_exit_handlers_fastpath(), which will cause SVM's
skip_emulated_instruction() to write a stale RIP.
We can move svm_exit_handlers_fastpath towards the end of
svm_vcpu_run(). To align VMX with SVM, keep svm_complete_interrupts()
close as well.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paul K. <kronenpj@kronenpj.dyndns.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
[Also move vmcb_mark_all_clean before any possible write to the VMCB.
- Paolo]
Even without in-kernel LAPIC we should allow writing '0' to
MSR_KVM_ASYNC_PF_EN as we're not enabling the mechanism. In
particular, QEMU with 'kernel-irqchip=off' fails to start
a guest with
qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0x0
Fixes: 9d3c447c72 ("KVM: X86: Fix async pf caused null-ptr-deref")
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200911093147.484565-1-vkuznets@redhat.com>
[Actually commit the version proposed by Sean Christopherson. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There may be many encrypted regions that need to be unregistered when a
SEV VM is destroyed. This can lead to soft lockups. For example, on a
host running 4.15:
watchdog: BUG: soft lockup - CPU#206 stuck for 11s! [t_virtual_machi:194348]
CPU: 206 PID: 194348 Comm: t_virtual_machi
RIP: 0010:free_unref_page_list+0x105/0x170
...
Call Trace:
[<0>] release_pages+0x159/0x3d0
[<0>] sev_unpin_memory+0x2c/0x50 [kvm_amd]
[<0>] __unregister_enc_region_locked+0x2f/0x70 [kvm_amd]
[<0>] svm_vm_destroy+0xa9/0x200 [kvm_amd]
[<0>] kvm_arch_destroy_vm+0x47/0x200
[<0>] kvm_put_kvm+0x1a8/0x2f0
[<0>] kvm_vm_release+0x25/0x30
[<0>] do_exit+0x335/0xc10
[<0>] do_group_exit+0x3f/0xa0
[<0>] get_signal+0x1bc/0x670
[<0>] do_signal+0x31/0x130
Although the CLFLUSH is no longer issued on every encrypted region to be
unregistered, there are no other changes that can prevent soft lockups for
very large SEV VMs in the latest kernel.
Periodically schedule if necessary. This still holds kvm->lock across the
resched, but since this only happens when the VM is destroyed this is
assumed to be acceptable.
Signed-off-by: David Rientjes <rientjes@google.com>
Message-Id: <alpine.DEB.2.23.453.2008251255240.2987727@chino.kir.corp.google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When kvm_mmu_get_page() gets a page with unsynced children, the spt
pagetable is unsynchronized with the guest pagetable. But the
guest might not issue a "flush" operation on it when the pagetable
entry is changed from zero or other cases. The hypervisor has the
responsibility to synchronize the pagetables.
KVM behaved as above for many years, But commit 8c8560b833
("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes")
inadvertently included a line of code to change it without giving any
reason in the changelog. It is clear that the commit's intention was to
change KVM_REQ_TLB_FLUSH -> KVM_REQ_TLB_FLUSH_CURRENT, so we don't
needlessly flush other contexts; however, one of the hunks changed
a nearby KVM_REQ_MMU_SYNC instead. This patch changes it back.
Link: https://lore.kernel.org/lkml/20200320212833.3507-26-sean.j.christopherson@intel.com/
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20200902135421.31158-1-jiangshanlai@gmail.com>
fixes: 8c8560b833 ("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A minor fix for the update of VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL field
in exit_ctls_high.
Fixes: 03a8871add ("KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL
VM-{Entry,Exit} control")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200828085622.8365-5-chenyi.qiang@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When L2 uses PAE, L0 intercepts of L2 writes to CR0/CR3/CR4 call
load_pdptrs to read the possibly updated PDPTEs from the guest
physical address referenced by CR3. It loads them into
vcpu->arch.walk_mmu->pdptrs and sets VCPU_EXREG_PDPTR in
vcpu->arch.regs_dirty.
At the subsequent assumed reentry into L2, the mmu will call
vmx_load_mmu_pgd which calls ept_load_pdptrs. ept_load_pdptrs sees
VCPU_EXREG_PDPTR set in vcpu->arch.regs_dirty and loads
VMCS02.GUEST_PDPTRn from vcpu->arch.walk_mmu->pdptrs[]. This all works
if the L2 CRn write intercept always resumes L2.
The resume path calls vmx_check_nested_events which checks for
exceptions, MTF, and expired VMX preemption timers. If
vmx_check_nested_events finds any of these conditions pending it will
reflect the corresponding exit into L1. Live migration at this point
would also cause a missed immediate reentry into L2.
After L1 exits, vmx_vcpu_run calls vmx_register_cache_reset which
clears VCPU_EXREG_PDPTR in vcpu->arch.regs_dirty. When L2 next
resumes, ept_load_pdptrs finds VCPU_EXREG_PDPTR clear in
vcpu->arch.regs_dirty and does not load VMCS02.GUEST_PDPTRn from
vcpu->arch.walk_mmu->pdptrs[]. prepare_vmcs02 will then load
VMCS02.GUEST_PDPTRn from vmcs12->pdptr0/1/2/3 which contain the stale
values stored at last L2 exit. A repro of this bug showed L2 entering
triple fault immediately due to the bad VMCS02.GUEST_PDPTRn values.
When L2 is in PAE paging mode add a call to ept_load_pdptrs before
leaving L2. This will update VMCS02.GUEST_PDPTRn if they are dirty in
vcpu->arch.walk_mmu->pdptrs[].
Tested:
kvm-unit-tests with new directed test: vmx_mtf_pdpte_test.
Verified that test fails without the fix.
Also ran Google internal VMM with an Ubuntu 16.04 4.4.0-83 guest running a
custom hypervisor with a 32-bit Windows XP L2 guest using PAE. Prior to fix
would repro readily. Ran 14 simultaneous L2s for 140 iterations with no
failures.
Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200820230545.2411347-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
-----BEGIN PGP SIGNATURE-----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=VBrL
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for Linux 5.9, take #1
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
Header frame.h is getting more code annotations to help objtool analyze
object files.
Rename the file to objtool.h.
[ jpoimboe: add objtool.h to MAINTAINERS ]
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Extend the vmcb_safe_area with SEV-ES fields and add a new
'struct ghcb' which will be used for guest-hypervisor communication.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-3-joro@8bytes.org
Do not allocate a vmcb_control_area and a vmcb_save_area on the stack,
as these structures will become larger with future extenstions of
SVM and thus the svm_set_nested_state() function will become a too large
stack frame.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907131613.12703-2-joro@8bytes.org
TSX suspend load tracking instruction is supported by the Intel uarch
Sapphire Rapids. It aims to give a way to choose which memory accesses
do not need to be tracked in the TSX read set. It's availability is
indicated as CPUID.(EAX=7,ECX=0):EDX[bit 16].
Expose TSX Suspend Load Address Tracking feature in KVM CPUID, so KVM
could pass this information to guests and they can make use of this
feature accordingly.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1598316478-23337-3-git-send-email-cathy.zhang@intel.com
Use hlist_for_each_entry_srcu() instead of hlist_for_each_entry_rcu()
as it also checkes if the right lock is held.
Using hlist_for_each_entry_rcu() with a condition argument will not
report the cases where a SRCU protected list is traversed using
rcu_read_lock(). Hence, use hlist_for_each_entry_srcu().
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: <kvm@vger.kernel.org>
* selftests fix for new binutils
* MMU notifier fix for arm64
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9ARnoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP2YAf/dgLrPm4y4jxm7Aiz3/txqrHEwogT
ZtvnzqUPb6+vkFrkop8QMOPw7A8NCfkn3/6sWbyUN5ObgOG1pxKyPraeN3ZdsDoR
KGwv6P0dKgI8B4UuGEMe9GazXv+oOv8+bSUJnE+HZiUHzJKlX4HJbxDwUhvSSatY
qYCZb/Uzqundh79TYULa7oI1/3F15A2J1zQPe4QgkToH9tsVB8PVfkH5uPJPp64M
DTm5+qgwwsBULFaAuuo3FTs9f3pWJxn8GOuico1Sm+RnR53mhbUJggUfFzP0rwzZ
Emevunje5r1rluFs+JWeNtflGH0gI4CLak7jvlOOBjrNb5XJgUSbzLXxkA==
=Jwic
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
arm64 requires a vcpu fd (KVM_HAS_DEVICE_ATTR vcpu ioctl) to probe
support for steal-time. However this is unnecessary, as only a KVM
fd is required, and it complicates userspace (userspace may prefer
delaying vcpu creation until after feature probing). Introduce a cap
that can be checked instead. While x86 can already probe steal-time
support with a kvm fd (KVM_GET_SUPPORTED_CPUID), we add the cap there
too for consistency.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20200804170604.42662-7-drjones@redhat.com
See the SDM, volume 3, section 4.4.1:
If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.
Fixes: b9baba8614 ("KVM, pkeys: expose CPUID/CR4 to guest")
Cc: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
See the SDM, volume 3, section 4.4.1:
If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.
Fixes: 0be0226f07 ("KVM: MMU: fix SMAP virtualization")
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-2-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Improvements and bugfixes for secure VM support, giving reduced startup
time and memory hotplug support.
* Locking fixes in nested KVM code
* Increase number of guests supported by HV KVM to 4094
* Preliminary POWER10 support
ARM:
* Split the VHE and nVHE hypervisor code bases, build the EL2 code
separately, allowing for the VHE code to now be built with instrumentation
* Level-based TLB invalidation support
* Restructure of the vcpu register storage to accomodate the NV code
* Pointer Authentication available for guests on nVHE hosts
* Simplification of the system register table parsing
* MMU cleanups and fixes
* A number of post-32bit cleanups and other fixes
MIPS:
* compilation fixes
x86:
* bugfixes
* support for the SERIALIZE instruction
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8yfuQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNweQgAiEycRbpifAueihK3ScKwYcCFhbHg
n6KLiFCY3sJRg+ORNb9EuFPJgGygV8DPKbEMvKaGDhNpX3rOpSIrpi5QQ5Hx+WOj
WHg+aX8Eyy1ys7V84UbiMeZKUbKDDRr0/UOUtJEsF4hiD7s0FgobbQhC/3+awp5k
sdSTMYlXelep+pjdFX7cNIgjrBNFtqH0ECeuDCcQzDg2zlH+poEPyLaC5+U4RF6r
pfvcxd6xp50fobo8ro7kMuBeclG3JxLjqqdNrkkHcF1DxROMLLKN7CjHZchYC/BK
c+S7JHLFnafxiTncMLhv3s4viey05mohW6SxeLw4qcWHfFlz+qyfZwMvZA==
=d/GI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"PPC:
- Improvements and bugfixes for secure VM support, giving reduced
startup time and memory hotplug support.
- Locking fixes in nested KVM code
- Increase number of guests supported by HV KVM to 4094
- Preliminary POWER10 support
ARM:
- Split the VHE and nVHE hypervisor code bases, build the EL2 code
separately, allowing for the VHE code to now be built with
instrumentation
- Level-based TLB invalidation support
- Restructure of the vcpu register storage to accomodate the NV code
- Pointer Authentication available for guests on nVHE hosts
- Simplification of the system register table parsing
- MMU cleanups and fixes
- A number of post-32bit cleanups and other fixes
MIPS:
- compilation fixes
x86:
- bugfixes
- support for the SERIALIZE instruction"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits)
KVM: MIPS/VZ: Fix build error caused by 'kvm_run' cleanup
x86/kvm/hyper-v: Synic default SCONTROL MSR needs to be enabled
MIPS: KVM: Convert a fallthrough comment to fallthrough
MIPS: VZ: Only include loongson_regs.h for CPU_LOONGSON64
x86: Expose SERIALIZE for supported cpuid
KVM: x86: Don't attempt to load PDPTRs when 64-bit mode is enabled
KVM: arm64: Move S1PTW S2 fault logic out of io_mem_abort()
KVM: arm64: Don't skip cache maintenance for read-only memslots
KVM: arm64: Handle data and instruction external aborts the same way
KVM: arm64: Rename kvm_vcpu_dabt_isextabt()
KVM: arm: Add trace name for ARM_NISV
KVM: arm64: Ensure that all nVHE hyp code is in .hyp.text
KVM: arm64: Substitute RANDOMIZE_BASE for HARDEN_EL2_VECTORS
KVM: arm64: Make nVHE ASLR conditional on RANDOMIZE_BASE
KVM: PPC: Book3S HV: Rework secure mem slot dropping
KVM: PPC: Book3S HV: Move kvmppc_svm_page_out up
KVM: PPC: Book3S HV: Migrate hot plugged memory
KVM: PPC: Book3S HV: In H_SVM_INIT_DONE, migrate remaining normal-GFNs to secure-GFNs
KVM: PPC: Book3S HV: Track the state GFNs associated with secure VMs
KVM: PPC: Book3S HV: Disable page merging in H_SVM_INIT_START
...
IRQ bypass support for vdpa and IFC
MLX5 vdpa driver
Endian-ness fixes for virtio drivers
Misc other fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl8yVEwPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNPEH/0Dtq1s1V4r/kxtLUoMophv9wuORpWCr98BQ
2aOveTmwTOVdZVOiw2tzTgO9nbWx+cL2HvkU7Aajfpz5hh93Z2VOo2n4a7hBC79f
rlc3GXiG+pMk5RfmqGofIHTU+D6ony4D5SXlUDurLdtEwunyuqZwABiWkZjdclZJ
bv90IL8Upzbz0rxYr7k3z8UepdOCt7r4QS/o7STHZBjJRyylxmO/R2yTnh6PtpRK
Q/z35wJBJ3SKc8X3Fi0VOOSeGNZOiypkkl9ZnLVY5lExNAU1+2MMn2UK119SlCDV
MSxb7quYFF4cksXH1g77GMBNi1uADRh1dtFMZdkKhZGljGxKLxo=
=6VTZ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- IRQ bypass support for vdpa and IFC
- MLX5 vdpa driver
- Endianness fixes for virtio drivers
- Misc other fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (71 commits)
vdpa/mlx5: fix up endian-ness for mtu
vdpa: Fix pointer math bug in vdpasim_get_config()
vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()
vdpa/mlx5: fix memory allocation failure checks
vdpa/mlx5: Fix uninitialised variable in core/mr.c
vdpa_sim: init iommu lock
virtio_config: fix up warnings on parisc
vdpa/mlx5: Add VDPA driver for supported mlx5 devices
vdpa/mlx5: Add shared memory registration code
vdpa/mlx5: Add support library for mlx5 VDPA implementation
vdpa/mlx5: Add hardware descriptive header file
vdpa: Modify get_vq_state() to return error code
net/vdpa: Use struct for set/get vq state
vdpa: remove hard coded virtq num
vdpasim: support batch updating
vhost-vdpa: support IOTLB batching hints
vhost-vdpa: support get/set backend features
vhost: generialize backend features setting/getting
vhost-vdpa: refine ioctl pre-processing
vDPA: dont change vq irq after DRIVER_OK
...
Based on an analysis of the HyperV firmwares (Gen1 and Gen2) it seems
like the SCONTROL is not being set to the ENABLED state as like we have
thought.
Also from a test done by Vitaly Kuznetsov, running a nested HyperV it
was concluded that the first access to the SCONTROL MSR with a read
resulted with the value of 0x1, aka HV_SYNIC_CONTROL_ENABLE.
It's important to note that this diverges from the value states in the
HyperV TLFS of 0.
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200717125238.1103096-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SERIALIZE instruction is supported by Tntel processors, like
Sapphire Rapids. SERIALIZE is a faster serializing instruction which
does not modify registers, arithmetic flags or memory, will not cause VM
exit. It's availability is indicated by CPUID.(EAX=7,ECX=0):ECX[bit 14].
Expose it in KVM supported CPUID. This way, KVM could pass this
information to guests and they can make use of these features accordingly.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't attempt to load PDPTRs if EFER.LME=1, i.e. if 64-bit mode is
enabled. A recent change to reload the PDTPRs when CR0.CD or CR0.NW is
toggled botched the EFER.LME handling and sends KVM down the PDTPR path
when is_paging() is true, i.e. when the guest toggles CD/NW in 64-bit
mode.
Split the CR0 checks for 64-bit vs. 32-bit PAE into separate paths. The
64-bit path is specifically checking state when paging is toggled on,
i.e. CR0.PG transititions from 0->1. The PDPTR path now needs to run if
the new CR0 state has paging enabled, irrespective of whether paging was
already enabled. Trying to shave a few cycles to make the PDPTR path an
"else if" case is a mess.
Fixes: d42e3fae6f ("kvm: x86: Read PDPTEs on CR0.CD and CR0.NW changes")
Cc: Jim Mattson <jmattson@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200714015732.32426-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86:
* Report last CPU for debugging
* Emulate smaller MAXPHYADDR in the guest than in the host
* .noinstr and tracing fixes from Thomas
* nested SVM page table switching optimization and fixes
Generic:
* Unify shadow MMU cache data structures across architectures
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8pC+oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcOwgAjomqtEqQNlp7DdZT7VyyklzbxX1/
ud7v+oOJ8K4sFlf64lSthjPo3N9rzZCcw+yOXmuyuITngXOGc3tzIwXpCzpLtuQ1
WO1Ql3B/2dCi3lP5OMmsO1UAZqy9pKLg1dfeYUPk48P5+p7d/NPmk+Em5kIYzKm5
JsaHfCp2EEXomwmljNJ8PQ1vTjIQSSzlgYUBZxmCkaaX7zbEUMtxAQCStHmt8B84
33LczwXBm3viSWrzsoBV37I70+tseugiSGsCfUyupXOvq55d6D9FCqtCb45Hn4Vh
Ik8ggKdalsk/reiGEwNw1/3nr6mRMkHSbl+Mhc4waOIFf9dn0urgQgOaDg==
=YVx0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"s390:
- implement diag318
x86:
- Report last CPU for debugging
- Emulate smaller MAXPHYADDR in the guest than in the host
- .noinstr and tracing fixes from Thomas
- nested SVM page table switching optimization and fixes
Generic:
- Unify shadow MMU cache data structures across architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
KVM: SVM: Fix sev_pin_memory() error handling
KVM: LAPIC: Set the TDCR settable bits
KVM: x86: Specify max TDP level via kvm_configure_mmu()
KVM: x86/mmu: Rename max_page_level to max_huge_page_level
KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR
KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch
KVM: x86: Pull the PGD's level from the MMU instead of recalculating it
KVM: VMX: Make vmx_load_mmu_pgd() static
KVM: x86/mmu: Add separate helper for shadow NPT root page role calc
KVM: VMX: Drop a duplicate declaration of construct_eptp()
KVM: nSVM: Correctly set the shadow NPT root level in its MMU role
KVM: Using macros instead of magic values
MIPS: KVM: Fix build error caused by 'kvm_run' cleanup
KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF
KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support
KVM: VMX: optimize #PF injection when MAXPHYADDR does not match
KVM: VMX: Add guest physical address check in EPT violation and misconfig
KVM: VMX: introduce vmx_need_pf_intercept
KVM: x86: update exception bitmap on CPUID changes
KVM: x86: rename update_bp_intercept to update_exception_bitmap
...
vDPA devices has dedicated backed hardware like
passthrough-ed devices. Then it is possible to setup irq
offloading to vCPU for vDPA devices. Thus this patch tries to
manipulated assigned device counters by
kvm_arch_start/end_assignment() in irqbypass manager, so that
assigned devices could be detected in update_pi_irte()
We will increase/decrease the assigned device counter in kvm/x86.
Both vDPA and VFIO would go through this code path.
Only X86 uses these counters and kvm_arch_start/end_assignment(),
so this code path only affect x86 for now.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200731065533.4144-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
this has been brought into a shape which is maintainable and actually
works.
This final version was done by Sasha Levin who took it up after Intel
dropped the ball. Sasha discovered that the SGX (sic!) offerings out there
ship rogue kernel modules enabling FSGSBASE behind the kernels back which
opens an instantanious unpriviledged root hole.
The FSGSBASE instructions provide a considerable speedup of the context
switch path and enable user space to write GSBASE without kernel
interaction. This enablement requires careful handling of the exception
entries which go through the paranoid entry path as they cannot longer rely
on the assumption that user GSBASE is positive (as enforced via prctl() on
non FSGSBASE enabled systemn). All other entries (syscalls, interrupts and
exceptions) can still just utilize SWAPGS unconditionally when the entry
comes from user space. Converting these entries to use FSGSBASE has no
benefit as SWAPGS is only marginally slower than WRGSBASE and locating and
retrieving the kernel GSBASE value is not a free operation either. The real
benefit of RD/WRGSBASE is the avoidance of the MSR reads and writes.
The changes come with appropriate selftests and have held up in field
testing against the (sanitized) Graphene-SGX driver.
-----BEGIN PGP SIGNATURE-----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=QaAN
-----END PGP SIGNATURE-----
Merge tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fsgsbase from Thomas Gleixner:
"Support for FSGSBASE. Almost 5 years after the first RFC to support
it, this has been brought into a shape which is maintainable and
actually works.
This final version was done by Sasha Levin who took it up after Intel
dropped the ball. Sasha discovered that the SGX (sic!) offerings out
there ship rogue kernel modules enabling FSGSBASE behind the kernels
back which opens an instantanious unpriviledged root hole.
The FSGSBASE instructions provide a considerable speedup of the
context switch path and enable user space to write GSBASE without
kernel interaction. This enablement requires careful handling of the
exception entries which go through the paranoid entry path as they
can no longer rely on the assumption that user GSBASE is positive (as
enforced via prctl() on non FSGSBASE enabled systemn).
All other entries (syscalls, interrupts and exceptions) can still just
utilize SWAPGS unconditionally when the entry comes from user space.
Converting these entries to use FSGSBASE has no benefit as SWAPGS is
only marginally slower than WRGSBASE and locating and retrieving the
kernel GSBASE value is not a free operation either. The real benefit
of RD/WRGSBASE is the avoidance of the MSR reads and writes.
The changes come with appropriate selftests and have held up in field
testing against the (sanitized) Graphene-SGX driver"
* tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/fsgsbase: Fix Xen PV support
x86/ptrace: Fix 32-bit PTRACE_SETREGS vs fsbase and gsbase
selftests/x86/fsgsbase: Add a missing memory constraint
selftests/x86/fsgsbase: Fix a comment in the ptrace_write_gsbase test
selftests/x86: Add a syscall_arg_fault_64 test for negative GSBASE
selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE
selftests/x86/fsgsbase: Test GS selector on ptracer-induced GS base write
Documentation/x86/64: Add documentation for GS/FS addressing mode
x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit
x86/entry/64: Introduce the FIND_PERCPU_BASE macro
x86/entry/64: Switch CR3 before SWAPGS in paranoid entry
x86/speculation/swapgs: Check FSGSBASE in enabling SWAPGS mitigation
x86/process/64: Use FSGSBASE instructions on thread copy and ptrace
x86/process/64: Use FSBSBASE in switch_to() if available
x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE
x86/fsgsbase/64: Enable FSGSBASE instructions in helper functions
x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions
x86/cpu: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE
...
to the generic code. Pretty much a straight forward 1:1 conversion plus the
consolidation of the KVM handling of pending work before entering guest
mode.
-----BEGIN PGP SIGNATURE-----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=84y7
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 conversion to generic entry code from Thomas Gleixner:
"The conversion of X86 syscall, interrupt and exception entry/exit
handling to the generic code.
Pretty much a straight-forward 1:1 conversion plus the consolidation
of the KVM handling of pending work before entering guest mode"
* tag 'x86-entry-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kvm: Use __xfer_to_guest_mode_work_pending() in kvm_run_vcpu()
x86/kvm: Use generic xfer to guest work function
x86/entry: Cleanup idtentry_enter/exit
x86/entry: Use generic interrupt entry/exit code
x86/entry: Cleanup idtentry_entry/exit_user
x86/entry: Use generic syscall exit functionality
x86/entry: Use generic syscall entry function
x86/ptrace: Provide pt_regs helper for entry/exit
x86/entry: Move user return notifier out of loop
x86/entry: Consolidate 32/64 bit syscall entry
x86/entry: Consolidate check_user_regs()
x86: Correct noinstr qualifiers
x86/idtentry: Remove stale comment
The sev_pin_memory() function was modified to return error pointers
instead of NULL but there are two problems. The first problem is that
if "npages" is zero then it still returns NULL. Secondly, several of
the callers were not updated to check for error pointers instead of
NULL.
Either one of these issues will lead to an Oops.
Fixes: a8d908b587 ("KVM: x86: report sev_pin_memory errors with PTR_ERR")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20200714142351.GA315374@mwanda>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is a little different between Intel and AMD, Intel's bit 2
is 0 and AMD is reserved. On bare-metal, Intel will refuse to set
APIC_TDCR once bits except 0, 1, 3 are setting, however, AMD will
accept bits 0, 1, 3 and ignore other bits setting as patch does.
Before the patch, we can get back anything what we set to the
APIC_TDCR, this patch improves it.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-2-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'Commit 8566ac8b8e ("KVM: SVM: Implement pause loop exit logic in SVM")'
drops disable pause loop exit/pause filtering capability completely, I
guess it is a merge fault by Radim since disable vmexits capabilities and
pause loop exit for SVM patchsets are merged at the same time. This patch
reintroduces the disable pause loop exit/pause filtering capability support.
Reported-by: Haiwei Li <lihaiwei@tencent.com>
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Fixes: 8566ac8b ("KVM: SVM: Implement pause loop exit logic in SVM")
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-3-git-send-email-wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prevent setting the tscdeadline timer if the lapic is hw disabled.
Fixes: bce87cce88 (KVM: x86: consolidate different ways to test for in-kernel LAPIC)
Cc: <stable@vger.kernel.org>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capture the max TDP level during kvm_configure_mmu() instead of using a
kvm_x86_ops hook to do it at every vCPU creation.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename max_page_level to explicitly call out that it tracks the max huge
page level so as to avoid confusion when a future patch moves the max
TDP level, i.e. max root level, into the MMU and kvm_configure_mmu().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the desired TDP level on the fly using the max TDP level and
MAXPHYADDR instead of doing the same when CPUID is updated. This avoids
the hidden dependency on cpuid_maxphyaddr() in vmx_get_tdp_level() and
also standardizes the "use 5-level paging iff MAXPHYADDR > 48" behavior
across x86.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the WARN in vmx_load_mmu_pgd() that was temporarily added to aid
bisection/debug in the event the current MMU's shadow root level didn't
match VMX's computed EPTP level.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the shadow_root_level from the current MMU as the root level for the
PGD, i.e. for VMX's EPTP. This eliminates the weird dependency between
VMX and the MMU where both must independently calculate the same root
level for things to work correctly. Temporarily keep VMX's calculation
of the level and use it to WARN if the incoming level diverges.
Opportunistically refactor kvm_mmu_load_pgd() to avoid indentation hell,
and rename a 'cr3' param in the load_mmu_pgd prototype that managed to
survive the cr3 purge.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make vmx_load_mmu_pgd() static as it is no longer invoked directly by
nested VMX (or any code for that matter).
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor the shadow NPT role calculation into a separate helper to
better differentiate it from the non-nested shadow MMU, e.g. the NPT
variant is never direct and derives its root level from the TDP level.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove an extra declaration of construct_eptp() from vmx.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the initialization of shadow NPT MMU's shadow_root_level into
kvm_init_shadow_npt_mmu() and explicitly set the level in the shadow NPT
MMU's role to be the TDP level. This ensures the role and MMU levels
are synchronized and also initialized before __kvm_mmu_new_pgd(), which
consumes the level when attempting a fast PGD switch.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: 9fa72119b2 ("kvm: x86: Introduce kvm_mmu_calc_root_page_role()")
Fixes: a506fdd223 ("KVM: nSVM: implement nested_svm_load_cr3() and use it for host->guest switch")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The comments explicitely explain that the work flags check and handling in
kvm_run_vcpu() is done with preemption and interrupts enabled as KVM
invokes the check again right before entering guest mode with interrupts
disabled which guarantees that the work flags are observed and handled
before VMENTER.
Nevertheless the flag pending check in kvm_run_vcpu() uses the helper
variant which requires interrupts to be disabled triggering an instant
lockdep splat. This was caught in testing before and then not fixed up in
the patch before applying. :(
Use the relaxed and intentionally racy __xfer_to_guest_mode_work_pending()
instead.
Fixes: 72c3c0fe54 ("x86/kvm: Use generic xfer to guest work function")
Reported-by: Qian Cai <cai@lca.pw> writes:
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87bljxa2sa.fsf@nanos.tec.linutronix.de
Instead of using magic values, use macros.
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <4c072161-80dd-b7ed-7adb-02acccaa0701@gmail.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hdr.vmx.flags is meant for future extensions to the ABI, rejecting
invalid flags is necessary to avoid broken half-loads of the
nVMX state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A missing VMCS12 was not causing -EINVAL (it was just read with
copy_from_user, so it is not a security issue, but it is still
wrong). Test for VMCS12 validity and reject the nested state
if a VMCS12 is required but not present.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the generic infrastructure to check for and handle pending work before
transitioning into guest mode.
This now handles TIF_NOTIFY_RESUME as well which was ignored so
far. Handling it is important as this covers task work and task work will
be used to offload the heavy lifting of POSIX CPU timers to thread context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200722220520.979724969@linutronix.de
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
The "if" that drops the present bit from the page structure fauls makes no sense.
It was added by yours truly in order to be bug-compatible with pre-existing code
and in order to make the tests pass; however, the tests are wrong. The behavior
after this patch matches bare metal.
Reported-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a new capability KVM_CAP_SMALLER_MAXPHYADDR which
allows userspace to query if the underlying architecture would
support GUEST_MAXPHYADDR < HOST_MAXPHYADDR and hence act accordingly
(e.g. qemu can decide if it should warn for -cpu ..,phys-bits=X)
The complications in this patch are due to unexpected (but documented)
behaviour we see with NPF vmexit handling in AMD processor. If
SVM is modified to add guest physical address checks in the NPF
and guest #PF paths, we see the followning error multiple times in
the 'access' test in kvm-unit-tests:
test pte.p pte.36 pde.p: FAIL: pte 2000021 expected 2000001
Dump mapping: address: 0x123400000000
------L4: 24c3027
------L3: 24c4027
------L2: 24c5021
------L1: 1002000021
This is because the PTE's accessed bit is set by the CPU hardware before
the NPF vmexit. This is handled completely by hardware and cannot be fixed
in software.
Therefore, availability of the new capability depends on a boolean variable
allow_smaller_maxphyaddr which is set individually by VMX and SVM init
routines. On VMX it's always set to true, on SVM it's only set to true
when NPT is not enabled.
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Babu Moger <babu.moger@amd.com>
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Message-Id: <20200710154811.418214-10-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ignore non-present page faults, since those cannot have reserved
bits set.
When running access.flat with "-cpu Haswell,phys-bits=36", the
number of trapped page faults goes down from 8872644 to 3978948.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-9-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check guest physical address against its maximum, which depends on the
guest MAXPHYADDR. If the guest's physical address exceeds the
maximum (i.e. has reserved bits set), inject a guest page fault with
PFERR_RSVD_MASK set.
This has to be done both in the EPT violation and page fault paths, as
there are complications in both cases with respect to the computation
of the correct error code.
For EPT violations, unfortunately the only possibility is to emulate,
because the access type in the exit qualification might refer to an
access to a paging structure, rather than to the access performed by
the program.
Trapping page faults instead is needed in order to correct the error code,
but the access type can be obtained from the original error code and
passed to gva_to_gpa. The corrections required in the error code are
subtle. For example, imagine that a PTE for a supervisor page has a reserved
bit set. On a supervisor-mode access, the EPT violation path would trigger.
However, on a user-mode access, the processor will not notice the reserved
bit and not include PFERR_RSVD_MASK in the error code.
Co-developed-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-8-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-7-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow vendor code to observe changes to MAXPHYADDR and start/stop
intercepting page faults.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We would like to introduce a callback to update the #PF intercept
when CPUID changes. Just reuse update_bp_intercept since VMX is
already using update_exception_bitmap instead of a bespoke function.
While at it, remove an unnecessary assignment in the SVM version,
which is already done in the caller (kvm_arch_vcpu_ioctl_set_guest_debug)
and has nothing to do with the exception bitmap.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel processors of various generations have supported 36, 39, 46 or 52
bits for physical addresses. Until IceLake introduced MAXPHYADDR==52,
running on a machine with higher MAXPHYADDR than the guest more or less
worked, because software that relied on reserved address bits (like KVM)
generally used bit 51 as a marker and therefore the page faults where
generated anyway.
Unfortunately this is not true anymore if the host MAXPHYADDR is 52,
and this can cause problems when migrating from a MAXPHYADDR<52
machine to one with MAXPHYADDR==52. Typically, the latter are machines
that support 5-level page tables, so they can be identified easily from
the LA57 CPUID bit.
When that happens, the guest might have a physical address with reserved
bits set, but the host won't see that and trap it. Hence, we need
to check page faults' physical addresses against the guest's maximum
physical memory and if it's exceeded, we need to add the PFERR_RSVD_MASK
bits to the page fault error code.
This patch does this for the MMU's page walks. The next patches will
ensure that the correct exception and error code is produced whenever
no host-reserved bits are set in page table entries.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-4-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Also no point of it being inline since it's always called through
function pointers. So remove that.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-3-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds two helper functions that will be used to support virtualizing
MAXPHYADDR in both kvm-intel.ko and kvm.ko.
kvm_fixup_and_inject_pf_error() injects a page fault for a user-specified GVA,
while kvm_mmu_is_illegal_gpa() checks whether a GPA exceeds vCPU address limits.
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-2-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mmu_check_root() check in fast_pgd_switch() seems to be
superfluous: when GPA is outside of the visible range
cached_root_available() will fail for non-direct roots
(as we can't have a matching one on the list) and we don't
seem to care for direct ones.
Also, raising #TF immediately when a non-existent GFN is written to CR3
doesn't seem to mach architectural behavior. Drop the check.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make nSVM code resemble nVMX where nested_vmx_load_cr3() is used on
both guest->host and host->guest transitions. Also, we can now
eliminate unconditional kvm_mmu_reset_context() and speed things up.
Note, nVMX has two different paths: load_vmcs12_host_state() and
nested_vmx_restore_host_state() and the later is used to restore from
'partial' switch to L2, it always uses kvm_mmu_reset_context().
nSVM doesn't have this yet. Also, nested_svm_vmexit()'s return value
is almost always ignored nowadays.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Undesired triple fault gets injected to L1 guest on SVM when L2 is
launched with certain CR3 values. #TF is raised by mmu_check_root()
check in fast_pgd_switch() and the root cause is that when
kvm_set_cr3() is called from nested_prepare_vmcb_save() with NPT
enabled CR3 points to a nGPA so we can't check it with
kvm_is_visible_gfn().
Using generic kvm_set_cr3() when switching to nested guest is not
a great idea as we'll have to distinguish between 'real' CR3s and
'nested' CR3s to e.g. not call kvm_mmu_new_pgd() with nGPA. Following
nVMX implement nested-specific nested_svm_load_cr3() doing the job.
To support the change, nested_svm_load_cr3() needs to be re-ordered
with nested_svm_init_mmu_context().
Note: the current implementation is sub-optimal as we always do TLB
flush/MMU sync but this is still an improvement as we at least stop doing
kvm_mmu_reset_context().
Fixes: 7c390d350f ("kvm: x86: Add fast CR3 switch code path")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_mmu_new_pgd() refers to arch.mmu and at this point it still references
arch.guest_mmu while arch.root_mmu is expected.
Note, the change is effectively a nop: when !npt_enabled,
nested_svm_uninit_mmu_context() does nothing (as we don't do
nested_svm_init_mmu_context()) and with npt_enabled we don't
do kvm_set_cr3(). However, it will matter when we move the
call to kvm_mmu_new_pgd into nested_svm_load_cr3().
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As a preparatory change for implementing nSVM-specific PGD switch
(following nVMX' nested_vmx_load_cr3()), introduce nested_svm_load_cr3()
instead of relying on kvm_set_cr3().
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some operations in enter_svm_guest_mode() may fail, e.g. currently
we suppress kvm_set_cr3() return value. Prepare the code to proparate
errors.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN_ON_ONCE(svm->nested.nested_run_pending) in nested_svm_vmexit()
will fire if nested_run_pending remains '1' but it doesn't really
need to, we are already failing and not going to run nested guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_init_shadow_mmu() was actually the only function that could be called
with different vcpu->arch.mmu values. Now that kvm_init_shadow_npt_mmu()
is separated from kvm_init_shadow_mmu(), we always know the MMU context
we need to use and there is no need to dereference vcpu->arch.mmu pointer.
Based on a patch by Vitaly Kuznetsov <vkuznets@redhat.com>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As a preparatory change for moving kvm_mmu_new_pgd() from
nested_prepare_vmcb_save() to nested_svm_init_mmu_context() split
kvm_init_shadow_npt_mmu() from kvm_init_shadow_mmu(). This also makes
the code look more like nVMX (kvm_init_shadow_ept_mmu()).
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
state_test/smm_test selftests are failing on AMD with:
"Unexpected result from KVM_GET_MSRS, r: 51 (failed MSR was 0x345)"
MSR_IA32_PERF_CAPABILITIES is an emulated MSR on Intel but it is not
known to AMD code, we can move the emulation to common x86 code. For
AMD, we basically just allow the host to read and write zero to the MSR.
Fixes: 27461da310 ("KVM: x86/pmu: Support full width counting")
Suggested-by: Jim Mattson <jmattson@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710152559.1645827-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 850448f35a ("KVM: nVMX: Fix VMX preemption timer migration",
2020-06-01) accidentally broke nVMX live migration from older version
by changing the userspace ABI. Restore it and, while at it, ensure
that vmx->nested.has_preemption_timer_deadline is always initialized
according to the KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE flag.
Cc: Makarand Sonare <makarandsonare@google.com>
Fixes: 850448f35a ("KVM: nVMX: Fix VMX preemption timer migration")
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move x86's memory cache helpers to common KVM code so that they can be
reused by arm64 and MIPS in future patches.
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-16-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the memory helpers that will soon be moved to common code and be
made globaly available via linux/kvm_host.h. "mmu" alone is not a
sufficient namespace for globally available KVM symbols.
Opportunistically add "nr_" in mmu_memory_cache_free_objects() to make
it clear the function returns the number of free objects, as opposed to
freeing existing objects.
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-14-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't bother filling the gfn array cache when the caller is a fully
direct MMU, i.e. won't need a gfn array for shadow pages.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-13-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set __GFP_ZERO for the shadow page memory cache and drop the explicit
clear_page() from kvm_mmu_get_page(). This moves the cost of zeroing a
page to the allocation time of the physical page, i.e. when topping up
the memory caches, and thus avoids having to zero out an entire page
while holding mmu_lock.
Cc: Peter Feiner <pfeiner@google.com>
Cc: Peter Shier <pshier@google.com>
Cc: Junaid Shahid <junaids@google.com>
Cc: Jim Mattson <jmattson@google.com>
Suggested-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-12-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a gfp_zero flag to 'struct kvm_mmu_memory_cache' and use it to
control __GFP_ZERO instead of hardcoding a call to kmem_cache_zalloc().
A future patch needs such a flag for the __get_free_page() path, as
gfn arrays do not need/want the allocator to zero the memory. Convert
the kmem_cache paths to __GFP_ZERO now so as to avoid a weird and
inconsistent API in the future.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use separate caches for allocating shadow pages versus gfn arrays. This
sets the stage for specifying __GFP_ZERO when allocating shadow pages
without incurring extra cost for gfn arrays.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the minimums in mmu_topup_memory_caches() to document the
driving mechanisms behind the minimums. Now that encountering an empty
cache is unlikely to trigger BUG_ON(), it is less dangerous to be more
precise when defining the minimums.
For rmaps, the logic is 1 parent PTE per level, plus a single rmap, and
prefetched rmaps. The extra objects in the current '8 + PREFETCH'
minimum came about due to an abundance of paranoia in commit
c41ef344de ("KVM: MMU: increase per-vcpu rmap cache alloc size"),
i.e. it could have increased the minimum to 2 rmaps. Furthermore, the
unexpected extra rmap case was killed off entirely by commits
f759e2b4c7 ("KVM: MMU: avoid pte_list_desc running out in
kvm_mmu_pte_write") and f5a1e9f895 ("KVM: MMU: remove call to
kvm_mmu_pte_write from walk_addr").
For the so called page cache, replace '8' with 2*PT64_ROOT_MAX_LEVEL.
The 2x multiplier is needed because the cache is used for both shadow
pages and gfn arrays for indirect MMUs.
And finally, for page headers, replace '4' with PT64_ROOT_MAX_LEVEL.
Note, KVM now supports 5-level paging, i.e. the old minimums that used a
baseline derived from 4-level paging were technically wrong. But, KVM
always allocates roots in a separate flow, e.g. it's impossible in the
current implementation to actually need 5 new shadow pages in a single
flow. Use PT64_ROOT_MAX_LEVEL unmodified instead of subtracting 1, as
the direct usage is likely more intuitive to uninformed readers, and the
inflated minimum is unlikely to affect functionality in practice.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Topup memory caches after walking the GVA->GPA translation during a
shadow page fault, there is no need to ensure the caches are full when
walking the GVA. As of commit f5a1e9f895 ("KVM: MMU: remove call
to kvm_mmu_pte_write from walk_addr"), the FNAME(walk_addr) flow no
longer add rmaps via kvm_mmu_pte_write().
This avoids allocating memory in the case that the GVA is unmapped in
the guest, and also provides a paper trail of why/when the memory caches
need to be filled.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid refilling the memory caches and potentially slow reclaim/swap when
handling a fast page fault, which does not need to allocate any new
objects.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attempt to allocate a new object instead of crashing KVM (and likely the
kernel) if a memory cache is unexpectedly empty. Use GFP_ATOMIC for the
allocation as the caches are used while holding mmu_lock. The immediate
BUG_ON() makes the code unnecessarily explosive and led to confusing
minimums being used in the past, e.g. allocating 4 objects where 1 would
suffice.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return errors directly from mmu_topup_memory_caches() instead of
branching to a label that does the same.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use "mc" for local variables to shorten line lengths and provide
consistent names, which will be especially helpful when some of the
helpers are moved to common KVM code in future patches.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "page" variants of the topup/free memory cache helpers, using
the existence of an associated kmem_cache to select the correct alloc
or free routine.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track the kmem_cache used for non-page KVM MMU memory caches instead of
passing in the associated kmem_cache when filling the cache. This will
allow consolidating code and other cleanups.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703023545.8771-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
read/write_cr2() go throuh the paravirt XXL indirection, but nested VMX in
a XEN_PV guest is not supported.
Use the native variants.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Message-Id: <20200708195322.344731916@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On guest exit MSR_GS_BASE contains whatever the guest wrote to it and the
first action after returning from the ASM code is to set it to the host
kernel value. This uses wrmsrl() which is interesting at least.
wrmsrl() is either using native_write_msr() or the paravirt variant. The
XEN_PV code is uninteresting as nested SVM in a XEN_PV guest does not work.
But native_write_msr() can be placed out of line by the compiler especially
when paravirtualization is enabled in the kernel configuration. The
function is marked notrace, but still can be probed if
CONFIG_KPROBE_EVENTS_ON_NOTRACE is enabled.
That would be a fatal problem as kprobe events use per-CPU variables which
are GS based and would be accessed with the guest GS. Depending on the GS
value this would either explode in colorful ways or lead to completely
undebugable data corruption.
Aside of that native_write_msr() contains a tracepoint which objtool
complains about as it is invoked from the noinstr section.
As this cannot run inside a XEN_PV guest there is no point in using
wrmsrl(). Use native_wrmsrl() instead which is just a plain native WRMSR
without tracing or anything else attached.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Message-Id: <20200708195322.244847377@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the functions which are inside the RCU off region into the
non-instrumentable text section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200708195322.144607767@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the functions which are inside the RCU off region into the
non-instrumentable text section.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200708195322.037311579@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Entering guest mode is more or less the same as returning to user
space. From an instrumentation point of view both leave kernel mode and the
transition to guest or user mode reenables interrupts on the host. In user
mode an interrupt is served directly and in guest mode it causes a VM exit
which then handles or reinjects the interrupt.
The transition from guest mode or user mode to kernel mode disables
interrupts, which needs to be recorded in instrumentation to set the
correct state again.
This is important for e.g. latency analysis because otherwise the execution
time in guest or user mode would be wrongly accounted as interrupt disabled
and could trigger false positives.
Add hardirq tracing to guest enter/exit functions in the same way as it
is done in the user mode enter/exit code, respecting the RCU requirements.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200708195321.934715094@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Entering guest mode is more or less the same as returning to user
space. From an instrumentation point of view both leave kernel mode and the
transition to guest or user mode reenables interrupts on the host. In user
mode an interrupt is served directly and in guest mode it causes a VM exit
which then handles or reinjects the interrupt.
The transition from guest mode or user mode to kernel mode disables
interrupts, which needs to be recorded in instrumentation to set the
correct state again.
This is important for e.g. latency analysis because otherwise the execution
time in guest or user mode would be wrongly accounted as interrupt disabled
and could trigger false positives.
Add hardirq tracing to guest enter/exit functions in the same way as it
is done in the user mode enter/exit code, respecting the RCU requirements.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200708195321.822002354@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Context tracking for KVM happens way too early in the vcpu_run()
code. Anything after guest_enter_irqoff() and before guest_exit_irqoff()
cannot use RCU and should also be not instrumented.
The current way of doing this covers way too much code. Move it closer to
the actual vmenter/exit code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200708195321.724574345@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid complex and in some cases incorrect logic in
kvm_spec_ctrl_test_value, just try the guest's given value on the host
processor instead, and if it doesn't #GP, allow the guest to set it.
One such case is when host CPU supports STIBP mitigation
but doesn't support IBRS (as is the case with some Zen2 AMD cpus),
and in this case we were giving guest #GP when it tried to use STIBP
The reason why can can do the host test is that IA32_SPEC_CTRL msr is
passed to the guest, after the guest sets it to a non zero value
for the first time (due to performance reasons),
and as as result of this, it is pointless to emulate #GP condition on
this first access, in a different way than what the host CPU does.
This is based on a patch from Sean Christopherson, who suggested this idea.
Fixes: 6441fa6178 ("KVM: x86: avoid incorrect writes to host MSR_IA32_SPEC_CTRL")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200708115731.180097-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In guest protected mode, if the current privilege level
is not 0 and the PCE flag in the CR4 register is cleared,
we will inject a #GP for RDPMC usage.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20200708074409.39028-1-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OVMF booted guest running on shadow pages crashes on TRIPLE FAULT after
enabling paging from SMM. The crash is triggered from mmu_check_root() and
is caused by kvm_is_visible_gfn() searching through memslots with as_id = 0
while vCPU may be in a different context (address space).
Introduce kvm_vcpu_is_visible_gfn() and use it from mmu_check_root().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200708140023.1476020-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_x86_ops.vcpu_after_set_cpuid() is used to update vmx/svm specific
vcpu settings based on updated CPUID settings. So it's supposed to be
called after CPUIDs are updated, i.e., kvm_update_cpuid_runtime().
Currently, kvm_update_cpuid_runtime() only updates CPUID bits of OSXSAVE,
APIC, OSPKE, MWAIT, KVM_FEATURE_PV_UNHALT and CPUID(0xD,0).ebx and
CPUID(0xD, 1).ebx. None of them is consumed by vmx/svm's
update_vcpu_after_set_cpuid(). So there is no dependency between them.
Move kvm_x86_ops.vcpu_after_set_cpuid() into kvm_vcpu_after_set_cpuid() is
obviously more reasonable.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-6-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The name of callback cpuid_update() is misleading that it's not about
updating CPUID settings of vcpu but updating the configurations of vcpu
based on the CPUIDs. So rename it to vcpu_after_set_cpuid().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-5-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now there is no updating CPUID bits behavior in kvm_update_cpuid(),
rename it to kvm_vcpu_after_set_cpuid().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-4-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Beside called in kvm_vcpu_ioctl_set_cpuid*(), kvm_update_cpuid() is also
called 5 places else in x86.c and 1 place else in lapic.c. All those 6
places only need the part of updating guest CPUIDs (OSXSAVE, OSPKE, APIC,
KVM_FEATURE_PV_UNHALT, ...) based on the runtime vcpu state, so extract
them as a separate kvm_update_cpuid_runtime().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-3-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_check_cpuid() to validate if userspace provides legal cpuid
settings and call it before KVM take any action to update CPUID or
update vcpu states based on given CPUID settings.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-2-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no dependencies between kvm_apic_set_version() and
kvm_update_cpuid() because kvm_apic_set_version() queries X2APIC CPUID bit,
which is not touched/changed by kvm_update_cpuid().
Obviously, kvm_apic_set_version() belongs to the category of updating
vcpu model.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-9-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only code cleanup and no functional change.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-8-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As handling of bits out of leaf 1 added over time, kvm_update_cpuid()
should not return directly if leaf 1 is absent, but should go on
updateing other CPUID leaves.
Keep the update of apic->lapic_timer.timer_mode_mask in a separate
wrapper, to minimize churn for code since it will be moved out of this
function in a future patch.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-3-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current implementation keeps userspace input of CPUID configuration and
cpuid->nent even if kvm_update_cpuid() fails. Reset vcpu->arch.cpuid_nent
to 0 for the case of failure as a simple fix.
Besides, update the doc to explicitly state that if IOCTL SET_CPUID*
fail KVM gives no gurantee that previous valid CPUID configuration is
kept.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-2-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some new Intel platforms (such as TGL) already have the
fourth fixed counter TOPDOWN.SLOTS, but it has not been
fully enabled on KVM and the host.
Therefore, we limit edx.split.num_counters_fixed to 3,
so that it does not break the kvm-unit-tests PMU test
case and bad-handled userspace.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20200624015928.118614-1-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to section "Canonicalization and Consistency Checks" in APM vol. 2
the following guest state is illegal:
"Any MBZ bit of CR3 is set."
"Any MBZ bit of CR4 is set."
Suggeted-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <1594168797-29444-3-git-send-email-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CR4.VMXE is reserved unless the VMX CPUID bit is set. On Intel,
it is also tested by vmx_set_cr4, but AMD relies on kvm_valid_cr4,
so fix it.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of creating the mask for guest CR4 reserved bits in kvm_valid_cr4(),
do it in kvm_update_cpuid() so that it can be reused instead of creating it
each time kvm_valid_cr4() is called.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <1594168797-29444-2-git-send-email-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the SDM, when PAE paging would be in use following a
MOV-to-CR0 that modifies any of CR0.CD, CR0.NW, or CR0.PG, then the
PDPTEs are loaded from the address in CR3. Previously, kvm only loaded
the PDPTEs when PAE paging would be in use following a MOV-to-CR0 that
modified CR0.PG.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200707223630.336700-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename KVM's accessor for retrieving a 'struct kvm_mmu_page' from the
associated host physical address to better convey what the function is
doing.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622202034.15093-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce sptep_to_sp() to reduce the boilerplate code needed to get the
shadow page associated with a spte pointer, and to improve readability
as it's not immediately obvious that "page_header" is a KVM-specific
accessor for retrieving a shadow page.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622202034.15093-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make 'struct kvm_mmu_page' MMU-only, nothing outside of the MMU should
be poking into the gory details of shadow pages.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622202034.15093-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add mmu/mmu_internal.h to hold declarations and definitions that need
to be shared between various mmu/ files, but should not be used by
anything outside of the MMU.
Begin populating mmu_internal.h with declarations of the helpers used by
page_track.c.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622202034.15093-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move kvm_mmu_available_pages() from mmu.h to mmu.c, it has a single
caller and has no business being exposed via mmu.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622202034.15093-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move mmu_audit.c and mmutrace.h under mmu/ where they belong.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622202034.15093-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Propagate any error returned by make_mmu_pages_available() out to
userspace instead of resuming the guest if the error occurs while
handling a page fault. Now that zapping the oldest MMU pages skips
active roots, i.e. fails if and only if there are no zappable pages,
there is no chance for a false positive, i.e. no chance of returning a
spurious error to userspace.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623193542.7554-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced kvm_mmu_zap_oldest_mmu_pages() to batch zap
MMU pages when shrinking a slab. This fixes a long standing issue where
KVM's shrinker implementation is completely ineffective due to zapping
only a single page. E.g. without batch zapping, forcing a scan via
drop_caches basically has no impact on a VM with ~2k shadow pages. With
batch zapping, the number of shadow pages can be reduced to a few
hundred pages in one or two runs of drop_caches.
Note, if the default batch size (currently 128) is problematic, e.g.
zapping 128 pages holds mmu_lock for too long, KVM can bound the batch
size by setting @batch in mmu_shrinker.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623193542.7554-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Collect MMU pages for zapping in a loop when making MMU pages available,
and skip over active roots when doing so as zapping an active root can
never immediately free up a page. Batching the zapping avoids multiple
remote TLB flushes and remedies the issue where the loop would bail
early if an active root was encountered.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623193542.7554-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Delete a shadow page from the invalidation list instead of throwing it
back on the list of active pages when it's a root shadow page with
active users. Invalid active root pages will be explicitly freed by
mmu_free_root_page() when the root_count hits zero, i.e. they don't need
to be put on the active list to avoid leakage.
Use sp->role.invalid to detect that a shadow page has already been
zapped, i.e. is not on a list.
WARN if an invalid page is encountered when zapping pages, as it should
now be impossible.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623193542.7554-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip the unsync checks and the write flooding clearing for fully direct
MMUs, which are guaranteed to not have unsync'd or indirect pages (write
flooding detection only applies to indirect pages). For TDP, this
avoids unnecessary memory reads and writes, and for the write flooding
count will also avoid dirtying a cache line (unsync_child_bitmap itself
consumes a cache line, i.e. write_flooding_count is guaranteed to be in
a different cache line than parent_ptes).
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623194027.23135-3-sean.j.christopherson@intel.com>
Reviewed-By: Jon Cargille <jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor for_each_valid_sp() to take the list of shadow pages instead of
retrieving it from a gfn to avoid doing the gfn->list hash and lookup
multiple times during kvm_get_mmu_page().
Cc: Peter Feiner <pfeiner@google.com>
Cc: Jon Cargille <jcargill@google.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623194027.23135-2-sean.j.christopherson@intel.com>
Reviewed-By: Jon Cargille <jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Match the naming with other nested svm functions.
No functional changes.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200625080325.28439-5-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make clear the symbols belong to the SVM code when they are built-in.
No functional changes.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200625080325.28439-4-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make it more clear what data structure these functions operate on.
No functional changes.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200625080325.28439-3-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Renaming is only needed in the svm.h header file.
No functional changes.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200625080325.28439-2-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add nested_vmx_fail() to wrap VM-Fail paths that _may_ result in VM-Fail
Valid to make it clear at the call sites that the Valid flavor isn't
guaranteed.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200609015607.6994-1-sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since this field is now in kvm_vcpu_arch, clean things up a little by
setting it in vendor-agnostic code: vcpu_enter_guest. Note that it
must be set after the call to kvm_x86_ops.run(), since it can't be
updated before pre_sev_run().
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200603235623.245638-7-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both the vcpu_vmx structure and the vcpu_svm structure have a
'last_cpu' field. Move the common field into the kvm_vcpu_arch
structure. For clarity, rename it to 'last_vmentry_cpu.'
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200603235623.245638-6-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
More often than not, a failed VM-entry in an x86 production
environment is induced by a defective CPU. To help identify the bad
hardware, include the id of the last logical CPU to run a vCPU in the
information provided to userspace on a KVM exit for failed VM-entry or
for KVM internal errors not associated with emulation. The presence of
this additional information is indicated by a new capability,
KVM_CAP_LAST_CPU.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200603235623.245638-5-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As we already do in svm, record the last logical processor on which a
vCPU has run, so that it can be communicated to userspace for
potential hardware errors.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200603235623.245638-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously, this field was only set when using SEV. Set it for all
vCPU configurations, so that it can be communicated to userspace for
diagnosing potential hardware errors.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200603235623.245638-3-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current logical processor id is cached in vcpu->cpu. Use it
instead of raw_smp_processor_id() when a kvm_vcpu struct is available.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200603235623.245638-2-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Callers of sev_pin_memory() treat
NULL differently:
sev_launch_secret()/svm_register_enc_region() return -ENOMEM
sev_dbg_crypt() returns -EFAULT.
Switching to ERR_PTR() preserves the error and enables cleaner reporting of
different kinds of failures.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code was using get_user_pages*(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's
time to convert the get_user_pages*() + put_page() calls to
pin_user_pages*() + unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Message-Id: <20200526062207.1360225-3-jhubbard@nvidia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two problems in svn_pin_memory():
1) The return value of get_user_pages_fast() is stored in an
unsigned long, although the declared return value is of type int.
This will not cause any symptoms, but it is misleading.
Fix this by changing the type of npinned to "int".
2) The number of pages passed into get_user_pages_fast() is stored
in an unsigned long, even though get_user_pages_fast() accepts an
int. This means that it is possible to silently overflow the number
of pages.
Fix this by adding a WARN_ON_ONCE() and an early error return. The
npages variable is left as an unsigned long for convenience in
checking for overflow.
Fixes: 89c5058090 ("KVM: SVM: Add support for KVM_SEV_LAUNCH_UPDATE_DATA command")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Message-Id: <20200526062207.1360225-2-jhubbard@nvidia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to section "Canonicalization and Consistency Checks" in APM vol. 2
the following guest state is illegal:
"DR6[63:32] are not zero."
"DR7[63:32] are not zero."
"Any MBZ bit of EFER is set."
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20200522221954.32131-3-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Logically the ignore_msrs and report_ignored_msrs should also apply to feature
MSRs. Add them in.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200622220442.21998-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR accesses can be one of:
(1) KVM internal access,
(2) userspace access (e.g., via KVM_SET_MSRS ioctl),
(3) guest access.
The ignore_msrs was previously handled by kvm_get_msr_common() and
kvm_set_msr_common(), which is the bottom of the msr access stack. It's
working in most cases, however it could dump unwanted warning messages to dmesg
even if kvm get/set the msrs internally when calling __kvm_set_msr() or
__kvm_get_msr() (e.g. kvm_cpuid()). Ideally we only want to trap cases (2)
or (3), but not (1) above.
To achieve this, move the ignore_msrs handling upper until the callers of
__kvm_get_msr() and __kvm_set_msr(). To identify the "msr missing" event, a
new return value (KVM_MSR_RET_INVALID==2) is used for that.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200622220442.21998-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move .write_log_dirty() into kvm_x86_nested_ops to help differentiate it
from the non-nested dirty log hooks. And because it's a nested-only
operation.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if vmx_write_pml_buffer() is called outside of guest mode instead
of silently ignoring the condition. The only caller is nested EPT's
ept_update_accessed_dirty_bits(), which should only be reachable when
L2 is active.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_write_log_dirty() in favor of invoking .write_log_dirty()
directly from FNAME(update_accessed_dirty_bits). "kvm_arch" is usually
used for x86 functions that are invoked from generic KVM, and implies
that there are external callers, neither of which is true.
Remove the check for a non-NULL kvm_x86_ops hook as the call is wrapped
in PTTYPE_EPT and is unconditionally set by VMX.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike normal 'int' functions returning '0' on success, kvm_setup_async_pf()/
kvm_arch_setup_async_pf() return '1' when a job to handle page fault
asynchronously was scheduled and '0' otherwise. To avoid the confusion
change return type to 'bool'.
No functional change intended.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200615121334.91300-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM guest code in Linux enables APF only when KVM_FEATURE_ASYNC_PF_INT
is supported, this means we will never see KVM_PV_REASON_PAGE_READY
when handling page fault vmexit in KVM.
While on it, make sure we only follow genuine page fault path when
APF reason is zero. If we happen to see something else this means
that the underlying hypervisor is misbehaving. Leave WARN_ON_ONCE()
to catch that.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the "common" KVM_POSSIBLE_CR*_GUEST_BITS defines to initialize the
CR0/CR4 guest host masks instead of duplicating most of the CR4 mask and
open coding the CR0 mask. SVM doesn't utilize the masks, i.e. the masks
are effectively VMX specific even if they're not named as such. This
avoids duplicate code, better documents the guest owned CR0 bit, and
eliminates the need for a build-time assertion to keep VMX and x86
synchronized.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703040422.31536-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mark CR4.TSD as being possibly owned by the guest as that is indeed the
case on VMX. Without TSD being tagged as possibly owned by the guest, a
targeted read of CR4 to get TSD could observe a stale value. This bug
is benign in the current code base as the sole consumer of TSD is the
emulator (for RDTSC) and the emulator always "reads" the entirety of CR4
when grabbing bits.
Add a build-time assertion in to ensure VMX doesn't hand over more CR4
bits without also updating x86.
Fixes: 52ce3c21ae ("x86,kvm,vmx: Don't trap writes to CR4.TSD")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703040422.31536-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inject a #GP on MOV CR4 if CR4.LA57 is toggled in 64-bit mode, which is
illegal per Intel's SDM:
CR4.LA57
57-bit linear addresses (bit 12 of CR4) ... blah blah blah ...
This bit cannot be modified in IA-32e mode.
Note, the pseudocode for MOV CR doesn't call out the fault condition,
which is likely why the check was missed during initial development.
This is arguably an SDM bug and will hopefully be fixed in future
release of the SDM.
Fixes: fd8cb43373 ("KVM: MMU: Expose the LA57 feature to VM.")
Cc: stable@vger.kernel.org
Reported-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703021714.5549-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bit 8 would be the "global" bit, which does not quite make sense for non-leaf
page table entries. Intel ignores it; AMD ignores it in PDEs and PDPEs, but
reserves it in PML4Es.
Probably, earlier versions of the AMD manual documented it as reserved in PDPEs
as well, and that behavior made it into KVM as well as kvm-unit-tests; fix it.
Cc: stable@vger.kernel.org
Reported-by: Nadav Amit <namit@vmware.com>
Fixes: a0c0feb579 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD", 2014-09-03)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Syzbot reported that:
CPU: 1 PID: 6780 Comm: syz-executor153 Not tainted 5.7.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__apic_accept_irq+0x46/0xb80
Call Trace:
kvm_arch_async_page_present+0x7de/0x9e0
kvm_check_async_pf_completion+0x18d/0x400
kvm_arch_vcpu_ioctl_run+0x18bf/0x69f0
kvm_vcpu_ioctl+0x46a/0xe20
ksys_ioctl+0x11a/0x180
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0xf6/0x7d0
entry_SYSCALL_64_after_hwframe+0x49/0xb3
The testcase enables APF mechanism in MSR_KVM_ASYNC_PF_EN with ASYNC_PF_INT
enabled w/o setting MSR_KVM_ASYNC_PF_INT before, what's worse, interrupt
based APF 'page ready' event delivery depends on in kernel lapic, however,
we didn't bail out when lapic is not in kernel during guest setting
MSR_KVM_ASYNC_PF_EN which causes the null-ptr-deref in host later.
This patch fixes it.
Reported-by: syzbot+1bf777dfdde86d64b89b@syzkaller.appspotmail.com
Fixes: 2635b5c4a0 (KVM: x86: interrupt based APF 'page ready' event delivery)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1593426391-8231-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove vcpu_vmx.host_pkru, which got left behind when PKRU support was
moved to common x86 code.
No functional change intended.
Fixes: 37486135d3 ("KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200617034123.25647-1-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Linux TSC calibration procedure is subject to small variations
(its common to see +-1 kHz difference between reboots on a given CPU, for example).
So migrating a guest between two hosts with identical processor can fail, in case
of a small variation in calibrated TSC between them.
Without TSC scaling, the current kernel interface will either return an error
(if user_tsc_khz <= tsc_khz) or enable TSC catchup mode.
This change enables the following TSC tolerance check to
accept KVM_SET_TSC_KHZ within tsc_tolerance_ppm (which is 250ppm by default).
/*
* Compute the variation in TSC rate which is acceptable
* within the range of tolerance and decide if the
* rate being applied is within that bounds of the hardware
* rate. If so, no scaling or compensation need be done.
*/
thresh_lo = adjust_tsc_khz(tsc_khz, -tsc_tolerance_ppm);
thresh_hi = adjust_tsc_khz(tsc_khz, tsc_tolerance_ppm);
if (user_tsc_khz < thresh_lo || user_tsc_khz > thresh_hi) {
pr_debug("kvm: requested TSC rate %u falls outside tolerance [%u,%u]\n", user_tsc_khz, thresh_lo, thresh_hi);
use_scaling = 1;
}
NTP daemon in the guest can correct this difference (NTP can correct upto 500ppm).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20200616114741.GA298183@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only MSR address range 0x800 through 0x8ff is architecturally reserved
and dedicated for accessing APIC registers in x2APIC mode.
Fixes: 0105d1a526 ("KVM: x2apic interface to lapic")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove support for context switching between the guest's and host's
desired UMWAIT_CONTROL. Propagating the guest's value to hardware isn't
required for correct functionality, e.g. KVM intercepts reads and writes
to the MSR, and the latency effects of the settings controlled by the
MSR are not architecturally visible.
As a general rule, KVM should not allow the guest to control power
management settings unless explicitly enabled by userspace, e.g. see
KVM_CAP_X86_DISABLE_EXITS. E.g. Intel's SDM explicitly states that C0.2
can improve the performance of SMT siblings. A devious guest could
disable C0.2 so as to improve the performance of their workloads at the
detriment to workloads running in the host or on other VMs.
Wholesale removal of UMWAIT_CONTROL context switching also fixes a race
condition where updates from the host may cause KVM to enter the guest
with the incorrect value. Because updates are are propagated to all
CPUs via IPI (SMP function callback), the value in hardware may be
stale with respect to the cached value and KVM could enter the guest
with the wrong value in hardware. As above, the guest can't observe the
bad value, but it's a weird and confusing wart in the implementation.
Removal also fixes the unnecessary usage of VMX's atomic load/store MSR
lists. Using the lists is only necessary for MSRs that are required for
correct functionality immediately upon VM-Enter/VM-Exit, e.g. EFER on
old hardware, or for MSRs that need to-the-uop precision, e.g. perf
related MSRs. For UMWAIT_CONTROL, the effects are only visible in the
kernel via TPAUSE/delay(), and KVM doesn't do any form of delay in
vcpu_vmx_run(). Using the atomic lists is undesirable as they are more
expensive than direct RDMSR/WRMSR.
Furthermore, even if giving the guest control of the MSR is legitimate,
e.g. in pass-through scenarios, it's not clear that the benefits would
outweigh the overhead. E.g. saving and restoring an MSR across a VMX
roundtrip costs ~250 cycles, and if the guest diverged from the host
that cost would be paid on every run of the guest. In other words, if
there is a legitimate use case then it should be enabled by a new
per-VM capability.
Note, KVM still needs to emulate MSR_IA32_UMWAIT_CONTROL so that it can
correctly expose other WAITPKG features to the guest, e.g. TPAUSE,
UMWAIT and UMONITOR.
Fixes: 6e3ba4abce ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623005135.10414-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all
intents and purposes is vmx_write_pml_buffer(), instead of having the
latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS. If the dirty bit
update is the result of KVM emulation (rare for L2), then the GPA in the
VMCS may be stale and/or hold a completely unrelated GPA.
Fixes: c5f983f6e8 ("nVMX: Implement emulated Page Modification Logging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
translate_gpa() returns a GPA, assigning it to 'real_gfn' seems obviously
wrong. There is no real issue because both 'gpa_t' and 'gfn_t' are u64 and
we don't use the value in 'real_gfn' as a GFN, we do
real_gfn = gpa_to_gfn(real_gfn);
instead. 'If you see a "buffalo" sign on an elephant's cage, do not trust
your eyes', but let's fix it for good.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200622151435.752560-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following race can cause lost map update events:
cpu1 cpu2
apic_map_dirty = true
------------------------------------------------------------
kvm_recalculate_apic_map:
pass check
mutex_lock(&kvm->arch.apic_map_lock);
if (!kvm->arch.apic_map_dirty)
and in process of updating map
-------------------------------------------------------------
other calls to
apic_map_dirty = true might be too late for affected cpu
-------------------------------------------------------------
apic_map_dirty = false
-------------------------------------------------------------
kvm_recalculate_apic_map:
bail out on
if (!kvm->arch.apic_map_dirty)
To fix it, record the beginning of an update of the APIC map in
apic_map_dirty. If another APIC map change switches apic_map_dirty
back to DIRTY during the update, kvm_recalculate_apic_map should not
make it CLEAN, and the other caller will go through the slow path.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guest fails to online hotplugged CPU with error
smpboot: do_boot_cpu failed(-1) to wakeup CPU#4
It's caused by the fact that kvm_apic_set_state(), which used to call
recalculate_apic_map() unconditionally and pulled hotplugged CPU into
apic map, is updating map conditionally on state changes. In this case
the APIC map is not considered dirty and the is not updated.
Fix the issue by forcing unconditional update from kvm_apic_set_state(),
like it used to be.
Fixes: 4abaffce4d ("KVM: LAPIC: Recalculate apic map in batch")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622160830.426022-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guest crashes are observed on a Cascade Lake system when 'perf top' is
launched on the host, e.g.
BUG: unable to handle kernel paging request at fffffe0000073038
PGD 7ffa7067 P4D 7ffa7067 PUD 7ffa6067 PMD 7ffa5067 PTE ffffffffff120
Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 1 Comm: systemd Not tainted 4.18.0+ #380
...
Call Trace:
serial8250_console_write+0xfe/0x1f0
call_console_drivers.constprop.0+0x9d/0x120
console_unlock+0x1ea/0x460
Call traces are different but the crash is imminent. The problem was
blindly bisected to the commit 041bc42ce2 ("KVM: VMX: Micro-optimize
vmexit time when not exposing PMU"). It was also confirmed that the
issue goes away if PMU is exposed to the guest.
With some instrumentation of the guest we can see what is being switched
(when we do atomic_switch_perf_msrs()):
vmx_vcpu_run: switching 2 msrs
vmx_vcpu_run: switching MSR38f guest: 70000000d host: 70000000f
vmx_vcpu_run: switching MSR3f1 guest: 0 host: 2
The current guess is that PEBS (MSR_IA32_PEBS_ENABLE, 0x3f1) is to blame.
Regardless of whether PMU is exposed to the guest or not, PEBS needs to
be disabled upon switch.
This reverts commit 041bc42ce2.
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200619094046.654019-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
save_fsgs_for_kvm() is invoked via
vcpu_enter_guest()
kvm_x86_ops.prepare_guest_switch(vcpu)
vmx_prepare_switch_to_guest()
save_fsgs_for_kvm()
with preemption disabled, but interrupts enabled.
The upcoming FSGSBASE based GS safe needs interrupts to be disabled. This
could be done in the helper function, but that function is also called from
switch_to() which has interrupts disabled already.
Disable interrupts inside save_fsgs_for_kvm() and rename the function to
current_save_fsgs() so it can be invoked from other places.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200528201402.1708239-7-sashal@kernel.org
Add is_intr_type() and is_intr_type_n() to consolidate the boilerplate
code for querying a specific type of interrupt given an encoded value
from VMCS.VM_{ENTER,EXIT}_INTR_INFO, with and without an associated
vector respectively.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200609014518.26756-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For some reasons, running a simple qemu-kvm command with KCSAN will
reset AMD hosts. It turns out svm_vcpu_run() could not be instrumented.
Disable it for now.
# /usr/libexec/qemu-kvm -name ubuntu-18.04-server-cloudimg -cpu host
-smp 2 -m 2G -hda ubuntu-18.04-server-cloudimg.qcow2
=== console output ===
Kernel 5.6.0-next-20200408+ on an x86_64
hp-dl385g10-05 login:
<...host reset...>
HPE ProLiant System BIOS A40 v1.20 (03/09/2018)
(C) Copyright 1982-2018 Hewlett Packard Enterprise Development LP
Early system initialization, please wait...
Signed-off-by: Qian Cai <cai@lca.pw>
Message-Id: <20200415153709.1559-1-cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
This all started about 6 month ago with the attempt to move the Posix CPU
timer heavy lifting out of the timer interrupt code and just have lockless
quick checks in that code path. Trivial 5 patches.
This unearthed an inconsistency in the KVM handling of task work and the
review requested to move all of this into generic code so other
architectures can share.
Valid request and solved with another 25 patches but those unearthed
inconsistencies vs. RCU and instrumentation.
Digging into this made it obvious that there are quite some inconsistencies
vs. instrumentation in general. The int3 text poke handling in particular
was completely unprotected and with the batched update of trace events even
more likely to expose to endless int3 recursion.
In parallel the RCU implications of instrumenting fragile entry code came
up in several discussions.
The conclusion of the X86 maintainer team was to go all the way and make
the protection against any form of instrumentation of fragile and dangerous
code pathes enforcable and verifiable by tooling.
A first batch of preparatory work hit mainline with commit d5f744f9a2.
The (almost) full solution introduced a new code section '.noinstr.text'
into which all code which needs to be protected from instrumentation of all
sorts goes into. Any call into instrumentable code out of this section has
to be annotated. objtool has support to validate this. Kprobes now excludes
this section fully which also prevents BPF from fiddling with it and all
'noinstr' annotated functions also keep ftrace off. The section, kprobes
and objtool changes are already merged.
The major changes coming with this are:
- Preparatory cleanups
- Annotating of relevant functions to move them into the noinstr.text
section or enforcing inlining by marking them __always_inline so the
compiler cannot misplace or instrument them.
- Splitting and simplifying the idtentry macro maze so that it is now
clearly separated into simple exception entries and the more
interesting ones which use interrupt stacks and have the paranoid
handling vs. CR3 and GS.
- Move quite some of the low level ASM functionality into C code:
- enter_from and exit to user space handling. The ASM code now calls
into C after doing the really necessary ASM handling and the return
path goes back out without bells and whistels in ASM.
- exception entry/exit got the equivivalent treatment
- move all IRQ tracepoints from ASM to C so they can be placed as
appropriate which is especially important for the int3 recursion
issue.
- Consolidate the declaration and definition of entry points between 32
and 64 bit. They share a common header and macros now.
- Remove the extra device interrupt entry maze and just use the regular
exception entry code.
- All ASM entry points except NMI are now generated from the shared header
file and the corresponding macros in the 32 and 64 bit entry ASM.
- The C code entry points are consolidated as well with the help of
DEFINE_IDTENTRY*() macros. This allows to ensure at one central point
that all corresponding entry points share the same semantics. The
actual function body for most entry points is in an instrumentable
and sane state.
There are special macros for the more sensitive entry points,
e.g. INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF.
They allow to put the whole entry instrumentation and RCU handling
into safe places instead of the previous pray that it is correct
approach.
- The INT3 text poke handling is now completely isolated and the
recursion issue banned. Aside of the entry rework this required other
isolation work, e.g. the ability to force inline bsearch.
- Prevent #DB on fragile entry code, entry relevant memory and disable
it on NMI, #MC entry, which allowed to get rid of the nested #DB IST
stack shifting hackery.
- A few other cleanups and enhancements which have been made possible
through this and already merged changes, e.g. consolidating and
further restricting the IDT code so the IDT table becomes RO after
init which removes yet another popular attack vector
- About 680 lines of ASM maze are gone.
There are a few open issues:
- An escape out of the noinstr section in the MCE handler which needs
some more thought but under the aspect that MCE is a complete
trainwreck by design and the propability to survive it is low, this was
not high on the priority list.
- Paravirtualization
When PV is enabled then objtool complains about a bunch of indirect
calls out of the noinstr section. There are a few straight forward
ways to fix this, but the other issues vs. general correctness were
more pressing than parawitz.
- KVM
KVM is inconsistent as well. Patches have been posted, but they have
not yet been commented on or picked up by the KVM folks.
- IDLE
Pretty much the same problems can be found in the low level idle code
especially the parts where RCU stopped watching. This was beyond the
scope of the more obvious and exposable problems and is on the todo
list.
The lesson learned from this brain melting exercise to morph the evolved
code base into something which can be validated and understood is that once
again the violation of the most important engineering principle
"correctness first" has caused quite a few people to spend valuable time on
problems which could have been avoided in the first place. The "features
first" tinkering mindset really has to stop.
With that I want to say thanks to everyone involved in contributing to this
effort. Special thanks go to the following people (alphabetical order):
Alexandre Chartre
Andy Lutomirski
Borislav Petkov
Brian Gerst
Frederic Weisbecker
Josh Poimboeuf
Juergen Gross
Lai Jiangshan
Macro Elver
Paolo Bonzini
Paul McKenney
Peter Zijlstra
Vitaly Kuznetsov
Will Deacon
-----BEGIN PGP SIGNATURE-----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=llba
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry updates from Thomas Gleixner:
"The x86 entry, exception and interrupt code rework
This all started about 6 month ago with the attempt to move the Posix
CPU timer heavy lifting out of the timer interrupt code and just have
lockless quick checks in that code path. Trivial 5 patches.
This unearthed an inconsistency in the KVM handling of task work and
the review requested to move all of this into generic code so other
architectures can share.
Valid request and solved with another 25 patches but those unearthed
inconsistencies vs. RCU and instrumentation.
Digging into this made it obvious that there are quite some
inconsistencies vs. instrumentation in general. The int3 text poke
handling in particular was completely unprotected and with the batched
update of trace events even more likely to expose to endless int3
recursion.
In parallel the RCU implications of instrumenting fragile entry code
came up in several discussions.
The conclusion of the x86 maintainer team was to go all the way and
make the protection against any form of instrumentation of fragile and
dangerous code pathes enforcable and verifiable by tooling.
A first batch of preparatory work hit mainline with commit
d5f744f9a2 ("Pull x86 entry code updates from Thomas Gleixner")
That (almost) full solution introduced a new code section
'.noinstr.text' into which all code which needs to be protected from
instrumentation of all sorts goes into. Any call into instrumentable
code out of this section has to be annotated. objtool has support to
validate this.
Kprobes now excludes this section fully which also prevents BPF from
fiddling with it and all 'noinstr' annotated functions also keep
ftrace off. The section, kprobes and objtool changes are already
merged.
The major changes coming with this are:
- Preparatory cleanups
- Annotating of relevant functions to move them into the
noinstr.text section or enforcing inlining by marking them
__always_inline so the compiler cannot misplace or instrument
them.
- Splitting and simplifying the idtentry macro maze so that it is
now clearly separated into simple exception entries and the more
interesting ones which use interrupt stacks and have the paranoid
handling vs. CR3 and GS.
- Move quite some of the low level ASM functionality into C code:
- enter_from and exit to user space handling. The ASM code now
calls into C after doing the really necessary ASM handling and
the return path goes back out without bells and whistels in
ASM.
- exception entry/exit got the equivivalent treatment
- move all IRQ tracepoints from ASM to C so they can be placed as
appropriate which is especially important for the int3
recursion issue.
- Consolidate the declaration and definition of entry points between
32 and 64 bit. They share a common header and macros now.
- Remove the extra device interrupt entry maze and just use the
regular exception entry code.
- All ASM entry points except NMI are now generated from the shared
header file and the corresponding macros in the 32 and 64 bit
entry ASM.
- The C code entry points are consolidated as well with the help of
DEFINE_IDTENTRY*() macros. This allows to ensure at one central
point that all corresponding entry points share the same
semantics. The actual function body for most entry points is in an
instrumentable and sane state.
There are special macros for the more sensitive entry points, e.g.
INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF.
They allow to put the whole entry instrumentation and RCU handling
into safe places instead of the previous pray that it is correct
approach.
- The INT3 text poke handling is now completely isolated and the
recursion issue banned. Aside of the entry rework this required
other isolation work, e.g. the ability to force inline bsearch.
- Prevent #DB on fragile entry code, entry relevant memory and
disable it on NMI, #MC entry, which allowed to get rid of the
nested #DB IST stack shifting hackery.
- A few other cleanups and enhancements which have been made
possible through this and already merged changes, e.g.
consolidating and further restricting the IDT code so the IDT
table becomes RO after init which removes yet another popular
attack vector
- About 680 lines of ASM maze are gone.
There are a few open issues:
- An escape out of the noinstr section in the MCE handler which needs
some more thought but under the aspect that MCE is a complete
trainwreck by design and the propability to survive it is low, this
was not high on the priority list.
- Paravirtualization
When PV is enabled then objtool complains about a bunch of indirect
calls out of the noinstr section. There are a few straight forward
ways to fix this, but the other issues vs. general correctness were
more pressing than parawitz.
- KVM
KVM is inconsistent as well. Patches have been posted, but they
have not yet been commented on or picked up by the KVM folks.
- IDLE
Pretty much the same problems can be found in the low level idle
code especially the parts where RCU stopped watching. This was
beyond the scope of the more obvious and exposable problems and is
on the todo list.
The lesson learned from this brain melting exercise to morph the
evolved code base into something which can be validated and understood
is that once again the violation of the most important engineering
principle "correctness first" has caused quite a few people to spend
valuable time on problems which could have been avoided in the first
place. The "features first" tinkering mindset really has to stop.
With that I want to say thanks to everyone involved in contributing to
this effort. Special thanks go to the following people (alphabetical
order): Alexandre Chartre, Andy Lutomirski, Borislav Petkov, Brian
Gerst, Frederic Weisbecker, Josh Poimboeuf, Juergen Gross, Lai
Jiangshan, Macro Elver, Paolo Bonzin,i Paul McKenney, Peter Zijlstra,
Vitaly Kuznetsov, and Will Deacon"
* tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (142 commits)
x86/entry: Force rcu_irq_enter() when in idle task
x86/entry: Make NMI use IDTENTRY_RAW
x86/entry: Treat BUG/WARN as NMI-like entries
x86/entry: Unbreak __irqentry_text_start/end magic
x86/entry: __always_inline CR2 for noinstr
lockdep: __always_inline more for noinstr
x86/entry: Re-order #DB handler to avoid *SAN instrumentation
x86/entry: __always_inline arch_atomic_* for noinstr
x86/entry: __always_inline irqflags for noinstr
x86/entry: __always_inline debugreg for noinstr
x86/idt: Consolidate idt functionality
x86/idt: Cleanup trap_init()
x86/idt: Use proper constants for table size
x86/idt: Add comments about early #PF handling
x86/idt: Mark init only functions __init
x86/entry: Rename trace_hardirqs_off_prepare()
x86/entry: Clarify irq_{enter,exit}_rcu()
x86/entry: Remove DBn stacks
x86/entry: Remove debug IDT frobbing
x86/entry: Optimize local_db_save() for virt
...
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes
The guest side of the asynchronous page fault work has been delayed to 5.9
in order to sync with Thomas's interrupt entry rework.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7icj4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPHGQgAj9+5j+f5v06iMP/+ponWwsVfh+5/
UR1gPbpMSFMKF0U+BCFxsBeGKWPDiz9QXaLfy6UGfOFYBI475Su5SoZ8/i/o6a2V
QjcKIJxBRNs66IG/774pIpONY8/mm/3b6vxmQktyBTqjb6XMGlOwoGZixj/RTp85
+uwSICxMlrijg+fhFMwC4Bo/8SFg+FeBVbwR07my88JaLj+3cV/NPolG900qLSa6
uPqJ289EQ86LrHIHXCEWRKYvwy77GFsmBYjKZH8yXpdzUlSGNexV8eIMAz50figu
wYRJGmHrRqwuzFwEGknv8SA3s2HVggXO4WVkWWCeJyO8nIVfYFUhME5l6Q==
=+Hh0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"The guest side of the asynchronous page fault work has been delayed to
5.9 in order to sync with Thomas's interrupt entry rework, but here's
the rest of the KVM updates for this merge window.
MIPS:
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits)
KVM: x86: do not pass poisoned hva to __kvm_set_memory_region
KVM: selftests: fix sync_with_host() in smm_test
KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
KVM: async_pf: Cleanup kvm_setup_async_pf()
kvm: i8254: remove redundant assignment to pointer s
KVM: x86: respect singlestep when emulating instruction
KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported
KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h
KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts
KVM: arm64: Remove host_cpu_context member from vcpu structure
KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr
KVM: arm64: Handle PtrAuth traps early
KVM: x86: Unexport x86_fpu_cache and make it static
KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K
KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
KVM: arm64: Stop save/restoring ACTLR_EL1
KVM: arm64: Add emulation for 32bit guests accessing ACTLR2
...
__kvm_set_memory_region does not use the hva at all, so trying to
catch use-after-delete is pointless and, worse, it fails access_ok
now that we apply it to all memslots including private kernel ones.
This fixes an AVIC regression.
Fixes: 09d952c971 ("KVM: check userspace_addr for all memslots")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'Page not present' event may or may not get injected depending on
guest's state. If the event wasn't injected, there is no need to
inject the corresponding 'page ready' event as the guest may get
confused. E.g. Linux thinks that the corresponding 'page not present'
event wasn't delivered *yet* and allocates a 'dummy entry' for it.
This entry is never freed.
Note, 'wakeup all' events have no corresponding 'page not present'
event and always get injected.
s390 seems to always be able to inject 'page not present', the
change is effectively a nop.
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610175532.779793-2-vkuznets@redhat.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208081
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pointer s is being assigned a value that is never read, the
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20200609233121.1118683-1-colin.king@canonical.com>
Fixes: 7837699fa6 ("KVM: In kernel PIT model")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When userspace configures KVM_GUESTDBG_SINGLESTEP, KVM will manage the
presence of X86_EFLAGS_TF via kvm_set/get_rflags on vcpus. The actual
rflag bit is therefore hidden from callers.
That includes init_emulate_ctxt() which uses the value returned from
kvm_get_flags() to set ctxt->tf. As a result, x86_emulate_instruction()
will skip a single step, leaving singlestep_rip stale and not returning
to userspace.
This resolves the issue by observing the vcpu guest_debug configuration
alongside ctxt->tf in x86_emulate_instruction(), performing the single
step if set.
Cc: stable@vger.kernel.org
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <20200519081048.8204-1-felipe@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using a topic branch so that stable branches can simply cherry-pick the
patch.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consult only the basic exit reason, i.e. bits 15:0 of vmcs.EXIT_REASON,
when determining whether a nested VM-Exit should be reflected into L1 or
handled by KVM in L0.
For better or worse, the switch statement in nested_vmx_exit_reflected()
currently defaults to "true", i.e. reflects any nested VM-Exit without
dedicated logic. Because the case statements only contain the basic
exit reason, any VM-Exit with modifier bits set will be reflected to L1,
even if KVM intended to handle it in L0.
Practically speaking, this only affects EXIT_REASON_MCE_DURING_VMENTRY,
i.e. a #MC that occurs on nested VM-Enter would be incorrectly routed to
L1, as "failed VM-Entry" is the only modifier that KVM can currently
encounter. The SMM modifiers will never be generated as KVM doesn't
support/employ a SMI Transfer Monitor. Ditto for "exit from enclave",
as KVM doesn't yet support virtualizing SGX, i.e. it's impossible to
enter an enclave in a KVM guest (L1 or L2).
Fixes: 644d711aa0 ("KVM: nVMX: Deciding if L0 or L1 should handle an L2 exit")
Cc: Jim Mattson <jmattson@google.com>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200227174430.26371-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because DRn access is 'difficult' with virt; but the DR7 read is cheaper
than a cacheline miss on native, add a virt specific fast path to
local_db_save(), such that when breakpoints are not in use to avoid
touching DRn entirely.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.187833200@infradead.org
Convert #MC to IDTENTRY_MCE:
- Implement the C entry points with DEFINE_IDTENTRY_MCE
- Emit the ASM stub with DECLARE_IDTENTRY_MCE
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
- Remove the error code from *machine_check_vector() as
it is always 0 and not used by any of the functions
it can point to. Fixup all the functions as well.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.334980426@linutronix.de
Pull misc uaccess updates from Al Viro:
"Assorted uaccess patches for this cycle - the stuff that didn't fit
into thematic series"
* 'uaccess.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
bpf: make bpf_check_uarg_tail_zero() use check_zeroed_user()
x86: kvm_hv_set_msr(): use __put_user() instead of 32bit __clear_user()
user_regset_copyout_zero(): use clear_user()
TEST_ACCESS_OK _never_ had been checked anywhere
x86: switch cp_stat64() to unsafe_put_user()
binfmt_flat: don't use __put_user()
binfmt_elf_fdpic: don't use __... uaccess primitives
binfmt_elf: don't bother with __{put,copy_to}_user()
pselect6() and friends: take handling the combined 6th/7th args into helper
Convert the last few remaining mmap_sem rwsem calls to use the new mmap
locking API. These were missed by coccinelle for some reason (I think
coccinelle does not support some of the preprocessor constructs in these
files ?)
[akpm@linux-foundation.org: convert linux-next leftovers]
[akpm@linux-foundation.org: more linux-next leftovers]
[akpm@linux-foundation.org: more linux-next leftovers]
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-6-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maxim Levitsky