We need the USB fixes in here, and it resolves a merge conflict in:
drivers/usb/dwc3/dwc3-pci.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Merge 5.17-rc4 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for control peripheral of EUD (Embedded USB Debugger) to
listen to events such as USB attach/detach, pet EUD to indicate software
is functional.Reusing the platform device kobj, sysfs entry 'enable' is
created to enable or disable EUD.
To enable the eud the following needs to be done
echo 1 > /sys/bus/platform/.../enable
To disable eud, following is the command
echo 0 > /sys/bus/platform/.../enable
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Link: https://lore.kernel.org/r/0ac5c2b2c8e4ce4f4f342a08b48cfc61aeaf7ee8.1644339918.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a bottom table border to complete the table format and prevent
a documentation build warning.
Documentation/ABI/testing/sysfs-class-power:459: WARNING: Malformed table.
No bottom table border found.
Fixes: 1b0b6cc803 ("power: supply: add charge_behaviour attributes")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Allow setting configfs params p_hs_bint/c_hs_bint to 0. If they are set
to 0, determine the largest bInterval (4 to 1) for which the required
bandwidth of the max samplerate fits the max allowed packet size. If the
required bandwidth exceeds max bandwidth for single-packet mode
(ep->mc=1), keep bInterval at 1.
The FS speed is left at fixed bInterval=1.
If for any speed the required bandwidth exceeds the max bandwidth
corresponding to the selected/determined bInterval, print a warning.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220127114331.41367-4-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow configuring the HS/SS bInterval through configfs, via
parameters p_hs_bint/c_hs_bint separately for playback/capture.
The default param values are left at the original 4.
Suggested-by: John Keeping <john@metanate.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220127114331.41367-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds "function_name" configfs entry to change string value
of the iInterface field. This field will be shown in Windows' audio
settings panel, so being able to change it is useful. It will default
to "Source/Sink" just as before.
Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
Link: https://lore.kernel.org/r/20220122112446.1415547-2-t123yh.xyz@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds "function_name" configfs entry to change string value
of the iInterface field. This field will be shown in Windows' audio
settings panel, so being able to change it is useful. It will default
to "AC Interface" just as before if unchanged.
Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
Link: https://lore.kernel.org/r/20220122112446.1415547-1-t123yh.xyz@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A list of sampling rates can be specified via configfs. All enabled
sampling rates are sent to the USB host on request. When the host
selects a sampling rate the internal active rate is updated.
Config strings with single value stay compatible with the previous version.
Multiple samplerates passed as configuration arrays to g_audio module
when built for f_uac1.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220121155308.48794-7-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A list of sampling rates can be specified via configfs. All enabled
sampling rates are sent to the USB host on request. When the host
selects a sampling rate, the internal active rate (stored in
struct f_uac2) is updated.
The gadget no longer supports only one frequency. Therefore USB strings
corresponding to the clock sources are renamed from specific Hz value to
general names Input clock/Output clock.
Config strings with single value stay compatible with the previous
version.
Multiple samplerates passed as configuration arrays to g_audio module
when built for f_uac2.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20220121155308.48794-6-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this round, we've tried to address some performance issues in f2fs_checkpoint
and direct IO flows. Also, there was a work to enhance the page cache management
used for compression. Other than them, we've done typical work including sysfs,
code clean-ups, tracepoint, sanity check, in addition to bug fixes on corner
cases.
Enhancement:
- use iomap for direct IO
- try to avoid lock contention to improve f2fs_ckpt speed
- avoid unnecessary memory allocation in compression flow
- POSIX_FADV_DONTNEED drops the page cache containing compression pages
- add some sysfs entries (gc_urgent_high_remaining, pending_discard)
Bug fix:
- try not to expose unwritten blocks to user by DIO
: this was added to avoid merge conflict; another patch is coming to address
other missing case.
- relax minor error condition for file pinning feature used in Android OTA
- fix potential deadlock case in compression flow
- should not truncate any block on pinned file
In addition, we've done some code clean-ups and tracepoint/sanity check
improvement.
-----BEGIN PGP SIGNATURE-----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=LCJH
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've tried to address some performance issues in
f2fs_checkpoint and direct IO flows. Also, there was a work to enhance
the page cache management used for compression. Other than them, we've
done typical work including sysfs, code clean-ups, tracepoint, sanity
check, in addition to bug fixes on corner cases.
Enhancements:
- use iomap for direct IO
- try to avoid lock contention to improve f2fs_ckpt speed
- avoid unnecessary memory allocation in compression flow
- POSIX_FADV_DONTNEED drops the page cache containing compression
pages
- add some sysfs entries (gc_urgent_high_remaining, pending_discard)
Bug fixes:
- try not to expose unwritten blocks to user by DIO (this was added
to avoid merge conflict; another patch is coming to address other
missing case)
- relax minor error condition for file pinning feature used in
Android OTA
- fix potential deadlock case in compression flow
- should not truncate any block on pinned file
In addition, we've done some code clean-ups and tracepoint/sanity
check improvement"
* tag 'f2fs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
f2fs: do not allow partial truncation on pinned file
f2fs: remove redunant invalidate compress pages
f2fs: Simplify bool conversion
f2fs: don't drop compressed page cache in .{invalidate,release}page
f2fs: fix to reserve space for IO align feature
f2fs: fix to check available space of CP area correctly in update_ckpt_flags()
f2fs: support fault injection to f2fs_trylock_op()
f2fs: clean up __find_inline_xattr() with __find_xattr()
f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr()
f2fs: do not bother checkpoint by f2fs_get_node_info
f2fs: avoid down_write on nat_tree_lock during checkpoint
f2fs: compress: fix potential deadlock of compress file
f2fs: avoid EINVAL by SBI_NEED_FSCK when pinning a file
f2fs: add gc_urgent_high_remaining sysfs node
f2fs: fix to do sanity check in is_alive()
f2fs: fix to avoid panic in is_alive() if metadata is inconsistent
f2fs: fix to do sanity check on inode type during garbage collection
f2fs: avoid duplicate call of mark_inode_dirty
f2fs: show number of pending discard commands
f2fs: support POSIX_FADV_DONTNEED drop compressed page cache
...
New support:
- DMA_MEMCPY_SG support is bought back as we have a user in Xilinx driver
- Support for TI J721S2 SoC in k3-udma driver
- Support for Ingenic MDMA and BDMA in the JZ4760
- Support for Renesas r8a779f0 dmac
Updates:
- We are finally getting rid of slave_id, so this brings in the changes
across tree for that using tag dmaengine_topic_slave_id_removal_5.17
- updates for idxd driver
- at_xdmac driver cleanup
-----BEGIN PGP SIGNATURE-----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=1KYH
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A bunch of new support and few updates to drivers:
New support:
- DMA_MEMCPY_SG support is bought back as we have a user in Xilinx
driver
- Support for TI J721S2 SoC in k3-udma driver
- Support for Ingenic MDMA and BDMA in the JZ4760
- Support for Renesas r8a779f0 dmac
Updates:
- We are finally getting rid of slave_id, so this brings in the
changes across tree for that
- updates for idxd driver
- at_xdmac driver cleanup"
* tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
dt-bindings: dma-controller: Split interrupt fields in example
dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API
dmaengine: at_xdmac: Fix race over irq_status
dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet()
dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
dmaengine: at_xdmac: Fix lld view setting
dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work()
dmaengine: at_xdmac: Fix concurrency over xfers_list
dmaengine: at_xdmac: Move the free desc to the tail of the desc list
dmaengine: at_xdmac: Fix race for the tx desc callback
dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie
dmaengine: at_xdmac: Print debug message after realeasing the lock
dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
dmaengine: at_xdmac: Don't start transactions at tx_submit level
dmaengine: idxd: deprecate token sysfs attributes for read buffers
dmaengine: idxd: change bandwidth token to read buffers
dmaengine: idxd: fix wq settings post wq disable
dmaengine: idxd: change MSIX allocation based on per wq activation
dmaengine: idxd: fix descriptor flushing locking
dmaengine: idxd: embed irq_entry in idxd_wq struct
...
partial support for < MAX_ORDER - 1 granularity for virtio-mem
driver_override for vdpa
sysfs ABI documentation for vdpa
multiqueue config support for mlx5 vdpa
Misc fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmHiDHkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpVT4H/3Veixt3uYPOmuLU2tSx+8X+sFTtik81hyiE
okz5fRJrxxA8SqS76FnmO10FS4hlPOGNk0Z5WVhr0yihwFvPLvpCM/xi2Lmrz9I7
pB0sXOIocEL1xApsxukR9K1Twpb2hfYsflbJYUVlRfhS5G0izKJNZp5I7OPrzd80
vVNNDWKW2iLDlfqsavumI4Kvm4nsFuCHG03jzMtcIa7YTXYV3DORD4ZGFFVUOIQN
t5F74TznwHOeYgJeg7TzjFjfPWmXjLetvx10QX1A1uOvwppWW/QY6My0UafTXNXj
VB3gOwJPf+gxXAXl/4bafq4NzM0xys6cpcPpjvhmU+erY4UuyAU=
=Y1eO
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
`driver_override` allows to control which of the vDPA bus drivers
binds to a vDPA device.
If `driver_override` is not set, the previous behaviour is followed:
devices use the first vDPA bus driver loaded (unless auto binding
is disabled).
Tested on Fedora 34 with driverctl(8):
$ modprobe virtio-vdpa
$ modprobe vhost-vdpa
$ modprobe vdpa-sim-net
$ vdpa dev add mgmtdev vdpasim_net name dev1
# dev1 is attached to the first vDPA bus driver loaded
$ driverctl -b vdpa list-devices
dev1 virtio_vdpa
$ driverctl -b vdpa set-override dev1 vhost_vdpa
$ driverctl -b vdpa list-devices
dev1 vhost_vdpa [*]
Note: driverctl(8) integrates with udev so the binding is
preserved.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211126164753.181829-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add missing documentation of sysfs ABI for vDPA bus in
the new Documentation/ABI/testing/sysfs-bus-vdpa file.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211126164753.181829-2-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Here is the large set of char, misc, and other "small" driver subsystem
changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the full
details.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYeGNAQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoVgCg1CPjMu8/SDj3Sm3a1UMQJn9jnl8AnjQcEp3z
hMr9mISG4r6g4PvjrJBj
=9May
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char, misc, and other "small" driver
subsystem changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the
full details.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
counter: 104-quad-8: Fix use-after-free by quad8_irq_handler
dt-bindings: mux: Document mux-states property
dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
counter: remove old and now unused registration API
counter: ti-eqep: Convert to new counter registration
counter: stm32-lptimer-cnt: Convert to new counter registration
counter: stm32-timer-cnt: Convert to new counter registration
counter: microchip-tcb-capture: Convert to new counter registration
counter: ftm-quaddec: Convert to new counter registration
counter: intel-qep: Convert to new counter registration
counter: interrupt-cnt: Convert to new counter registration
counter: 104-quad-8: Convert to new counter registration
counter: Update documentation for new counter registration functions
counter: Provide alternative counter registration functions
counter: stm32-timer-cnt: Convert to counter_priv() wrapper
counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper
counter: ti-eqep: Convert to counter_priv() wrapper
counter: ftm-quaddec: Convert to counter_priv() wrapper
counter: intel-qep: Convert to counter_priv() wrapper
counter: microchip-tcb-capture: Convert to counter_priv() wrapper
...
- Simplify the dax_operations API
- Eliminate bdev_dax_pgoff() in favor of the filesystem maintaining
and applying a partition offset to all its DAX iomap operations.
- Remove wrappers and device-mapper stacked callbacks for
->copy_from_iter() and ->copy_to_iter() in favor of moving
block_device relative offset responsibility to the
dax_direct_access() caller.
- Remove the need for an @bdev in filesystem-DAX infrastructure
- Remove unused uio helpers copy_from_iter_flushcache() and
copy_mc_to_iter() as only the non-check_copy_size() versions are
used for DAX.
- Prepare XFS for the pending (next merge window) DAX+reflink support
- Remove deprecated DEV_DAX_PMEM_COMPAT support
- Cleanup a straggling misuse of the GUID api
Tags offered after the branch was cut:
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/Ydb/3P+8nvjCjYfO@redhat.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYd3dTAAKCRDfioYZHlFs
Z//UAP9zetoTE+O7zJG7CXja4jSopSadbdbh6QKSXaqfKBPvQQD+N4US3wA2bGv8
f/qCY62j2Hj3hUTGHs9RvTyw3JsSYAA=
=QvDs
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax and libnvdimm updates from Dan Williams:
"The bulk of this is a rework of the dax_operations API after
discovering the obstacles it posed to the work-in-progress DAX+reflink
support for XFS and other copy-on-write filesystem mechanics.
Primarily the need to plumb a block_device through the API to handle
partition offsets was a sticking point and Christoph untangled that
dependency in addition to other cleanups to make landing the
DAX+reflink support easier.
The DAX_PMEM_COMPAT option has been around for 4 years and not only
are distributions shipping userspace that understand the current
configuration API, but some are not even bothering to turn this option
on anymore, so it seems a good time to remove it per the deprecation
schedule. Recall that this was added after the device-dax subsystem
moved from /sys/class/dax to /sys/bus/dax for its sysfs organization.
All recent functionality depends on /sys/bus/dax.
Some other miscellaneous cleanups and reflink prep patches are
included as well.
Summary:
- Simplify the dax_operations API:
- Eliminate bdev_dax_pgoff() in favor of the filesystem
maintaining and applying a partition offset to all its DAX iomap
operations.
- Remove wrappers and device-mapper stacked callbacks for
->copy_from_iter() and ->copy_to_iter() in favor of moving
block_device relative offset responsibility to the
dax_direct_access() caller.
- Remove the need for an @bdev in filesystem-DAX infrastructure
- Remove unused uio helpers copy_from_iter_flushcache() and
copy_mc_to_iter() as only the non-check_copy_size() versions are
used for DAX.
- Prepare XFS for the pending (next merge window) DAX+reflink support
- Remove deprecated DEV_DAX_PMEM_COMPAT support
- Cleanup a straggling misuse of the GUID api"
* tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits)
iomap: Fix error handling in iomap_zero_iter()
ACPI: NFIT: Import GUID before use
dax: remove the copy_from_iter and copy_to_iter methods
dax: remove the DAXDEV_F_SYNC flag
dax: simplify dax_synchronous and set_dax_synchronous
uio: remove copy_from_iter_flushcache() and copy_mc_to_iter()
iomap: turn the byte variable in iomap_zero_iter into a ssize_t
memremap: remove support for external pgmap refcounts
fsdax: don't require CONFIG_BLOCK
iomap: build the block based code conditionally
dax: fix up some of the block device related ifdefs
fsdax: shift partition offset handling into the file systems
dax: return the partition offset from fs_dax_get_by_bdev
iomap: add a IOMAP_DAX flag
xfs: pass the mapping flags to xfs_bmbt_to_iomap
xfs: use xfs_direct_write_iomap_ops for DAX zeroing
xfs: move dax device handling into xfs_{alloc,free}_buftarg
ext4: cleanup the dax handling in ext4_fill_super
ext2: cleanup the dax handling in ext2_fill_super
fsdax: decouple zeroing from the iomap buffered I/O code
...
Here is the big set of USB and Thunderbolt driver changes for 5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were
acked by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for
5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd66Tg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynH2wCfetT95966ZMICGDmdwZpEBBYCO1wAn2v9Pwd2
CeXrMLdaOr9WkV2P6mE5
=K4Jh
-----END PGP SIGNATURE-----
Merge tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were acked
by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for 5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
docs: ABI: fixed formatting in configfs-usb-gadget-uac2
usb: gadget: u_audio: Subdevice 0 for capture ctls
usb: gadget: u_audio: fix calculations for small bInterval
usb: dwc2: gadget: initialize max_speed from params
usb: dwc2: do not gate off the hardware if it does not support clock gating
usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
USB: common: debug: add needed kernel.h include
headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
headers/prep: usb: gadget: Fix namespace collision
USB: core: Fix bug in resuming hub's handling of wakeup requests
USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
usb: gadget: clear related members when goto fail
usb: gadget: don't release an existing dev->buf
usb: dwc2: Simplify a bitmap declaration
usb: Remove usb_for_each_port()
usb: typec: port-mapper: Convert to the component framework
usb: Link the ports to the connectors they are attached to
...
Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant
subsystems all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd7deA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym8ngCgw0ANwrRPE5b1dthEmfU2f8Knk5kAn0pHQv6R
VRZJypgNfU/Pt0ykstZD
=CO9J
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant subsystems
all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
kobject documentation: remove default_attrs information
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
debugfs: lockdown: Allow reading debugfs files that are not world readable
driver core: Make bus notifiers in right order in really_probe()
driver core: Move driver_sysfs_remove() after driver_sysfs_add()
firmware: edd: remove empty default_attrs array
firmware: dmi-sysfs: use default_groups in kobj_type
qemu_fw_cfg: use default_groups in kobj_type
firmware: memmap: use default_groups in kobj_type
sh: sq: use default_groups in kobj_type
headers/uninline: Uninline single-use function: kobject_has_children()
devtmpfs: mount with noexec and nosuid
driver core: Simplify async probe test code by using ktime_ms_delta()
nilfs2: use default_groups in kobj_type
kobject: remove kset from struct kset_uevent_ops callbacks
driver core: make kobj_type constant.
driver core: platform: document registration-failure requirement
vdpa/mlx5: Use auxiliary_device driver data helpers
net/mlx5e: Use auxiliary_device driver data helpers
soundwire: intel: Use auxiliary_device driver data helpers
...
JFFS2:
- Fix for a deadlock in jffs2_write_begin()
UBI:
- Fixes in comments
UBIFS:
- Expose error counters in sysfs
- Many bugfixes found by Hulk Robot and others
-----BEGIN PGP SIGNATURE-----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=rpfR
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
"JFFS2:
- Fix for a deadlock in jffs2_write_begin()
UBI:
- Fixes in comments
UBIFS:
- Expose error counters in sysfs
- Many bugfixes found by Hulk Robot and others"
* tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: GC deadlock reading a page that is used in jffs2_write_begin()
ubifs: read-only if LEB may always be taken in ubifs_garbage_collect
ubifs: fix double return leb in ubifs_garbage_collect
ubifs: fix slab-out-of-bounds in ubifs_change_lp
ubifs: fix snprintf() length check
ubifs: Document sysfs nodes
ubifs: Export filesystem error counters
ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffers
ubifs: Make use of the helper macro kthread_run()
ubi: Fix a mistake in comment
ubifs: Fix spelling mistakes
- add sysfs interface and a sysfs node to control sync decompression;
- add tail-packing inline support for compressed files;
- get rid of erofs_get_meta_page().
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCYduH/BEceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBNPdAP9hKomD1hRiFeCWlLA1nDXYkqGbbt6+D3HT
cm4G7DgVBAD+O+RWv6JVYg1zAAFlKmxqEKEfoDLKI65wAjH1V/h/dQE=
=cEam
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, tail-packing data inline for compressed files is now
supported so that tail pcluster can be stored and read together with
inode metadata in order to save data I/O and storage space.
In addition to that, to prepare for the upcoming subpage, folio and
fscache features, we also introduce meta buffers to get rid of
erofs_get_meta_page() since it was too close to the page itself.
In addition, in order to show supported kernel features and control
sync decompression strategy, new sysfs nodes are introduced in this
cycle as well.
Summary:
- add sysfs interface and a sysfs node to control sync decompression
- add tail-packing inline support for compressed files
- get rid of erofs_get_meta_page()"
* tag 'erofs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: use meta buffers for zmap operations
erofs: use meta buffers for xattr operations
erofs: use meta buffers for super operations
erofs: use meta buffers for inode operations
erofs: introduce meta buffer operations
erofs: add on-disk compressed tail-packing inline support
erofs: support inline data decompression
erofs: support unaligned data decompression
erofs: introduce z_erofs_fixup_insize
erofs: tidy up z_erofs_lz4_decompress
erofs: clean up erofs_map_blocks tracepoints
erofs: Replace zero-length array with flexible-array member
erofs: add sysfs node to control sync decompression strategy
erofs: add sysfs interface
erofs: rename lz4_0pading to zero_padding
Highlights:
- new drivers:
- asus-tf103c-dock
- intel_crystal_cove_charger
- lenovo-yogabook-wmi
- simatic-ipc platform-code + led driver + watchdog driver
- x86-android-tablets (kernel module to workaround DSDT bugs on these)
- amd-pmc:
- bug-fixes
- smar trace buffer support
- asus-wmi: support for custom fan curves
- int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
- ACPI core + int3472 changes to delay enumeration of camera sensor I2C
clients until the PMIC for the sensor has been fully probed
- Add support for board data (DSDT info is incomplete) for setting up
the tps68470 PMIC used on some boards with these cameras
- Add board data for the Microsoft Surface Go (original, v2 and v3)
- thinkpad_acpi:
- various cleanups
- support for forced battery discharging (for battery calibration)
- support to inhibit battery charging
- this includes power_supply core changes to add new APIs for this
- think_lmi: enhanced BIOS password support
- various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ACPI:
- delay enumeration of devices with a _DEP pointing to an INT3472 device
Add Asus TF103C dock driver:
- Add Asus TF103C dock driver
Add intel_crystal_cove_charger driver:
- Add intel_crystal_cove_charger driver
Documentation:
- syfs-class-firmware-attributes: Lenovo Opcode support
Merge tag 'platform-drivers-x86-int3472-1' into review-hans:
- Merge tag 'platform-drivers-x86-int3472-1' into review-hans
amd-pmc:
- only use callbacks for suspend
- Add support for AMD Smart Trace Buffer
- Simplify error handling and store the pci_dev in amd_pmc_dev structure
- Fix s2idle failures on certain AMD laptops
- Make CONFIG_AMD_PMC depend on RTC_CLASS
apple-gmux:
- use resource_size() with res
asus-wmi:
- Reshuffle headers for better maintenance
- Split MODULE_AUTHOR() on per author basis
- Join string literals back
- remove unneeded semicolon
- Add support for custom fan curves
dell-wmi-descriptor:
- disable by default
hp_accel:
- Use SIMPLE_DEV_PM_OPS() for PM ops
- Fix an error handling path in 'lis3lv02d_probe()'
i2c:
- acpi: Add i2c_acpi_new_device_by_fwnode() function
- acpi: Use acpi_dev_ready_for_enumeration() helper
int3472:
- Add board data for Surface Go 3
- Deal with probe ordering issues
- Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
- Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
- Add get_sensor_adev_and_name() helper
- Split into 2 drivers
intel-uncore-frequency:
- use default_groups in kobj_type
intel_pmc_core:
- fix memleak on registration failure
leds:
- simatic-ipc-leds: add new driver for Siemens Industial PCs
lenovo-yogabook-wmi:
- Add support for hall sensor on the back
- Add driver for Lenovo Yoga Book
lg-laptop:
- Recognize more models
platform:
- surface: Propagate ACPI Dependency
platform/mellanox:
- mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
- mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
platform/surface:
- aggregator_registry: Rename device registration function
- aggregator_registry: Use generic client removal function
- aggregator: Make client device removal more generic
platform/x86/intel:
- Remove X86_PLATFORM_DRIVERS_INTEL
- hid: add quirk to support Surface Go 3
platform_data:
- Add linux/platform_data/tps68470.h file
pmc_atom:
- improve critclk_systems matching for Siemens PCs
power:
- supply: Provide stubs for charge_behaviour helpers
- supply: fix charge_behaviour attribute initialization
- supply: add helpers for charge_behaviour sysfs
- supply: add charge_behaviour attributes
samsung-laptop:
- Fix typo in a comment
simatic-ipc:
- add main driver for Siemens devices
system76_acpi:
- Guard System76 EC specific functionality
think-lmi:
- Prevent underflow in index_store()
- Simplify tlmi_analyze() error handling a bit
- Move kobject_init() call into tlmi_create_auth()
- Opcode support
- Abort probe on analyze failure
thinkpad_acpi:
- support inhibit-charge
- support force-discharge
- Add lid_logo_dot to the list of safe LEDs
- Add LED_RETAIN_AT_SHUTDOWN to led_class_devs
- Remove unused sensors_pdev_attrs_registered flag
- Fix the hwmon sysfs-attr showing up in the wrong place
- tpacpi_attr_group contains driver attributes not device attrs
- Register tpacpi_pdriver after subdriver init
- Restore missing hotkey_tablet_mode and hotkey_radio_sw sysfs-attr
- Fix thermal_temp_input_attr sorting
- Remove "goto err_exit" from hotkey_init()
- Properly indent code in tpacpi_dytc_profile_init()
- Cleanup dytc_profile_available
- Simplify dytc_version handling
- Make *_init() functions return -ENODEV instead of 1
- Accept ibm_init_struct.init() returning -ENODEV
- Convert platform driver to use dev_groups
- fix documentation for adaptive keyboard
- Fix WWAN device disabled issue after S3 deep
- Add support for dual fan control
tools/power/x86/intel-speed-select:
- v1.11 release
- Update max frequency
touchscreen_dmi:
- Remove the Glavey TM800A550L entry
- Enable pen support on the Chuwi Hi10 Plus and Pro
- Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
- Add TrekStor SurfTab duo W1 touchscreen info
watchdog:
- simatic-ipc-wdt: add new driver for Siemens Industrial PCs
wmi:
- Add no_notify_data flag to struct wmi_driver
- Fix driver->notify() vs ->probe() race
- Replace read_takes_no_args with a flags field
x86-android-tablets:
- Fix GPIO lookup leak on error-exit
- Add TM800A550L data
- Add Asus MeMO Pad 7 ME176C data
- Add Asus TF103C data
- Add support for preloading modules
- Add support for registering GPIO lookup tables
- Add support for instantiating serdevs
- Add support for instantiating platform-devs
- Add support for PMIC interrupts
- Don't return -EPROBE_DEFER from a non probe() function
- New driver for x86 Android tablets
x86/platform/uv:
- use default_groups in kobj_type
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmHcCbkUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9y3yAf/Xo8TWsnF7XoS3pNCqRcObIulHy6u
9AOD4gTb0p9LiAd8WN75UsQDew0Rib+UDTS3s6g9l71fMzpTFOD4IaBPrVAmIxpu
Qs9raFTH67CFid/V3DCwAjPQYxxp5LBGvYJ4oy3OmaYHieV9jdsvNLISlpi/V8wR
PmbmYtiK5TPZwRT+mknq89D+LynP2NYkvoqRitmB7MrAvxY3c0ssrex6dXMrdgqK
ehRtfz/ER8xQ03APIzHG+ec73LZsHCMDDG7teas4tiMlMaWGgRO2I8GAudjuPEoy
mBTSb3ABuEud8LTMgjB+trM2w9IAoFE0L6/OrKE5dK1tPdaLxvCuuSVheQ==
=tmPR
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
New drivers:
- asus-tf103c-dock
- intel_crystal_cove_charger
- lenovo-yogabook-wmi
- simatic-ipc platform-code + led driver + watchdog driver
- x86-android-tablets (kernel module to workaround DSDT bugs on
these)
amd-pmc:
- bug-fixes
- smar trace buffer support
asus-wmi:
- support for custom fan curves
int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
- ACPI core + int3472 changes to delay enumeration of camera sensor
I2C clients until the PMIC for the sensor has been fully probed
- Add support for board data (DSDT info is incomplete) for setting up
the tps68470 PMIC used on some boards with these cameras
- Add board data for the Microsoft Surface Go (original, v2 and v3)
thinkpad_acpi:
- various cleanups
- support for forced battery discharging (for battery calibration)
- support to inhibit battery charging
- this includes power_supply core changes to add new APIs for this
think_lmi:
- enhanced BIOS password support
various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (78 commits)
power: supply: Provide stubs for charge_behaviour helpers
platform/x86: x86-android-tablets: Fix GPIO lookup leak on error-exit
platform/x86: int3472: Add board data for Surface Go 3
platform/x86: Add Asus TF103C dock driver
platform/x86: x86-android-tablets: Add TM800A550L data
platform/x86: x86-android-tablets: Add Asus MeMO Pad 7 ME176C data
platform/x86: x86-android-tablets: Add Asus TF103C data
platform/x86: x86-android-tablets: Add support for preloading modules
platform/x86: x86-android-tablets: Add support for registering GPIO lookup tables
platform/x86: x86-android-tablets: Add support for instantiating serdevs
platform/x86: x86-android-tablets: Add support for instantiating platform-devs
platform/x86: x86-android-tablets: Add support for PMIC interrupts
platform/x86: x86-android-tablets: Don't return -EPROBE_DEFER from a non probe() function
platform/x86: touchscreen_dmi: Remove the Glavey TM800A550L entry
platform/x86: touchscreen_dmi: Enable pen support on the Chuwi Hi10 Plus and Pro
platform/x86: touchscreen_dmi: Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
platform/x86: Add intel_crystal_cove_charger driver
power: supply: fix charge_behaviour attribute initialization
platform/x86: intel-uncore-frequency: use default_groups in kobj_type
x86/platform/uv: use default_groups in kobj_type
...
power-supply core:
- introduce "No Battery" health status
- use library interpolation
- add power_supply_battery_info documentation
- migrate power_supply_battery_info to be fully heap allocated
making it more obvious that it needs to be free'd manually
Drivers:
- max77976-charger: new driver
- qcom-smbb: add pm8226 charger support
- bq25890-charger: support battery temperature readings
- ab8500: continue migrating towards using standard core APIs
-----BEGIN PGP SIGNATURE-----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=9cda
-----END PGP SIGNATURE-----
Merge tag 'for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce "No Battery" health status
- use library interpolation
- add power_supply_battery_info documentation
- migrate power_supply_battery_info to be fully heap allocated making
it more obvious that it needs to be free'd manually
Drivers:
- max77976-charger: new driver
- qcom-smbb: add pm8226 charger support
- bq25890-charger: support battery temperature readings
- ab8500: continue migrating towards using standard core APIs"
* tag 'for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
power: supply_core: Pass pointer to battery info
power: supply: ab8500: Fix the error handling path of ab8500_charger_probe()
power: reset: mt6397: Check for null res pointer
power: bq25890: add POWER_SUPPLY_PROP_TEMP
power: supply: qcom_smbb: support pm8226
dt-bindings: power: supply: pm8941-charger: add pm8226
power: supply: ab8500: Standardize capacity lookup
power: supply: ab8500: Standardize temp res lookup
power: supply: ab8500: Standardize CV voltage
power: supply: ab8500: Standardize CC current
power: supply: ab8500: Make recharge capacity a constant
power: supply: ab8500: Standardize termination current
power: supply: ab8500: Standardize internal resistance
power: supply: ab8500_fg: Init battery data in bind()
power: supply: ab8500: Standardize voltages
power: supply: ab8500: Standardize technology
power: supply: ab8500: Standardize design capacity
power: supply: ab8500: Use only one battery type
power: supply: ab8500: Drop unused battery types
power: supply: ab8500: Standardize operating temperature
...
sysfs documentation is supposed to go in Documentation/ABI/.
However, /sys/block/<disk>/queue/* are documented in
Documentation/block/queue-sysfs.rst, and sometimes redundantly in
Documentation/ABI/stable/sysfs-block too.
Let's consolidate this documentation into Documentation/ABI/.
Therefore, copy the relevant docs from queue-sysfs.rst into sysfs-block.
This primarily means adding the 25 missing files that were documented in
queue-sysfs.rst only, as well as mentioning the RO/RW status of files.
Documentation/ABI/ requires "Date" and "Contact" fields. For the Date
fields, I used the date of the commit which added support for each file.
For the "Contact" fields, I used linux-block.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209003833.6396-5-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The nomerges file was missing a "Contact" entry. Use linux-block.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209003833.6396-4-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sort the documentation for the files alphabetically by file path so that
there is a logical order and it's clear where to add new files.
With two small exceptions, this patch doesn't change the documentation
itself and just reorders it:
- In /sys/block/<disk>/<part>/stat, I replaced <part> with <partition>
to be consistent with the other files.
- The description for /sys/block/<disk>/<part>/stat referred to another
file "above", which I reworded.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209003833.6396-3-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer sysfs ABI is widely used by userspace software and is
considered stable.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20211209003833.6396-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following sysfs attributes will be obsolete due to the name change of
tokens to read buffers:
max_tokens
token_limit
group/tokens_allowed
group/tokens_reserved
group/use_token_limit
Create new entries and have old entry print warning of deprecation.
New attributes to replace the token ones:
max_read_buffers
read_buffer_limit
group/read_buffers_allowed
group/read_buffers_reserved
group/use_read_buffer_limit
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951339488.2988321.2424012059911316373.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Creating link to the USB Type-C connector for every new port
that is added when possible.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223082349.45616-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The existing configfs-usb-gadget-uac2 ABI doc for testing was missing
the num_requests param. The patch adds the parameter to the document.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211225130929.205629-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A small additional set of things that just missed the previous
pull request and have mostly been through plenty of review before the
holiday period began (or are trivial). I've not taken some other series
on the list to allow for more eyes after the holiday period.
New device support
* adi,admv1013
- New driver for this wideband microwave upconverter including dt-bindings
and some device specific ABI due to the need to describe phase calibrations
of a differential channel on both i and q phases. Previously we could
do differential or i/q but not both on the same channel. The driver
ABI uses a workaround for core support which will do until we know if
this is a common requirement for which a more generic solution is
needed.
MAINTAINERS:
* Add Haibo Chen as a maintainer for various NXP SoC ADCs.
Minor cleanup:
* sunrise_co2
- Make sure an uninitialized value isn't used to set *val in read_raw().
Not a real bug, but a compiler or reviewer can't tell that based
on what they can see locally.
-----BEGIN PGP SIGNATURE-----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=A8Bn
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.17b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of new device support etc for IIO in the 5.17 cycle.
A small additional set of things that just missed the previous
pull request and have mostly been through plenty of review before the
holiday period began (or are trivial). I've not taken some other series
on the list to allow for more eyes after the holiday period.
New device support
* adi,admv1013
- New driver for this wideband microwave upconverter including dt-bindings
and some device specific ABI due to the need to describe phase calibrations
of a differential channel on both i and q phases. Previously we could
do differential or i/q but not both on the same channel. The driver
ABI uses a workaround for core support which will do until we know if
this is a common requirement for which a more generic solution is
needed.
MAINTAINERS:
* Add Haibo Chen as a maintainer for various NXP SoC ADCs.
Minor cleanup:
* sunrise_co2
- Make sure an uninitialized value isn't used to set *val in read_raw().
Not a real bug, but a compiler or reviewer can't tell that based
on what they can see locally.
* tag 'iio-for-5.17b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: chemical: sunrise_co2: set val parameter only on success
dt-bindings:iio:adc: update the maintainer of vf610-adc
MAINTAINERS: add imx7d/imx6sx/imx6ul/imx8qxp and vf610 adc maintainer
Documentation:ABI:testing:admv1013: add ABI docs
dt-bindings: iio: frequency: add admv1013 doc
iio: frequency: admv1013: add support for ADMV1013
Move an entry in the debugfs documentation to align with the
alphabetical order which is kept this file.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
I2C debugfs support is limited to 1 byte. We extend functionality
to more than 1 byte by using one of the pad fields as a length.
No backward compatibility issues as new F/W versions will treat 0
length as a 1 byte length transaction.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add documentation for the new sysfs nodes
/sys/fs/ubifs/ubiX_Y/errors_magic
/sys/fs/ubifs/ubiX_Y/errors_node
/sys/fs/ubifs/ubiX_Y/errors_crc
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add a sysfs knob to allow tuning of retries for the kernel ENQCMDS
descriptor submission. While on host, it is not as likely that ENQCMDS
return busy during normal operations due to the driver controlling the
number of descriptors allocated for submission. However, when the driver is
operating as a guest driver, the chance of retry goes up significantly due
to sharing a wq with multiple VMs. A default value is provided with the
system admin being able to tune the value on a per WQ basis.
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163820629464.2702134.7577370098568297574.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Added a new sysfs node called gc_urgent_high_remaining. The user can
set the trial count limit for GC urgent high mode with this value. If
GC thread gets to the limit, the mode will turn back to GC normal mode.
By default, the value is zero, which means there is no limit like before.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This information can be used to check how much time we need to give to issue
all the discard commands.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
== Problem ==
The amount of SGX memory on a system is determined by the BIOS and it
varies wildly between systems. It can be as small as dozens of MB's
and as large as many GB's on servers. Just like how applications need
to know how much regular RAM is available, enclave builders need to
know how much SGX memory an enclave can consume.
== Solution ==
Introduce a new sysfs file:
/sys/devices/system/node/nodeX/x86/sgx_total_bytes
to enumerate the amount of SGX memory available in each NUMA node.
This serves the same function for SGX as /proc/meminfo or
/sys/devices/system/node/nodeX/meminfo does for normal RAM.
'sgx_total_bytes' is needed today to help drive the SGX selftests.
SGX-specific swap code is exercised by creating overcommitted enclaves
which are larger than the physical SGX memory on the system. They
currently use a CPUID-based approach which can diverge from the actual
amount of SGX memory available. 'sgx_total_bytes' ensures that the
selftests can work efficiently and do not attempt stupid things like
creating a 100,000 MB enclave on a system with 128 MB of SGX memory.
== Implementation Details ==
Introduce CONFIG_HAVE_ARCH_NODE_DEV_GROUP opt-in flag to expose an
arch specific attribute group, and add an attribute for the amount of
SGX memory in bytes to each NUMA node:
== ABI Design Discussion ==
As opposed to the per-node ABI, a single, global ABI was considered.
However, this would prevent enclaves from being able to size
themselves so that they fit on a single NUMA node. Essentially, a
single value would rule out NUMA optimizations for enclaves.
Create a new "x86/" directory inside each "nodeX/" sysfs directory.
'sgx_total_bytes' is expected to be the first of at least a few
sgx-specific files to be placed in the new directory. Just scanning
/proc/meminfo, these are the no-brainers that we have for RAM, but we
need for SGX:
MemTotal: xxxx kB // sgx_total_bytes (implemented here)
MemFree: yyyy kB // sgx_free_bytes
SwapTotal: zzzz kB // sgx_swapped_bytes
So, at *least* three. I think we will eventually end up needing
something more along the lines of a dozen. A new directory (as
opposed to being in the nodeX/ "root") directory avoids cluttering the
root with several "sgx_*" files.
Place the new file in a new "nodeX/x86/" directory because SGX is
highly x86-specific. It is very unlikely that any other architecture
(or even non-Intel x86 vendor) will ever implement SGX. Using "sgx/"
as opposed to "x86/" was also considered. But, there is a real chance
this can get used for other arch-specific purposes.
[ dhansen: rewrite changelog ]
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211116162116.93081-2-jarkko@kernel.org
Although readpage is a synchronous path, there will be no additional
kworker scheduling overhead in non-atomic contexts together with
dm-verity.
Let's add a sysfs node to disable sync decompression as an option.
Link: https://lore.kernel.org/r/20211206143552.8384-1-huangjianan@oppo.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Greg Kroah-Hartman