A new document, Documentation/s390/vfio-ap-locking.rst was added. Make sure
the new document is picked up for the VFIO AP maintainers by using a
wildcard: Documentation/s390/vfio-ap*.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Introduces a new document describing the locks used by the vfio_ap device
driver and how to use them so as to avoid lockdep reports and deadlock
situations.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Update the documentation in vfio-ap.rst to include information about the
AP dynamic configuration support (e.g., hot plug of adapters, domains
and control domains via the matrix mediated device's sysfs assignment
attributes). This patch also makes a few minor tweaks to make corrections
and clarifications.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This patch implements two new AP driver callbacks:
void (*on_config_changed)(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info);
void (*on_scan_complete)(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info);
The on_config_changed callback is invoked at the start of the AP bus scan
function when it determines that the host AP configuration information
has changed since the previous scan.
The vfio_ap device driver registers a callback function for this callback
that performs the following operations:
1. Unplugs the adapters, domains and control domains removed from the
host's AP configuration from the guests to which they are
assigned in a single operation.
2. Stores bitmaps identifying the adapters, domains and control domains
added to the host's AP configuration with the structure representing
the mediated device. When the vfio_ap device driver's probe callback is
subsequently invoked, the probe function will recognize that the
queue is being probed due to a change in the host's AP configuration
and the plugging of the queue into the guest will be bypassed.
The on_scan_complete callback is invoked after the ap bus scan is
completed if the host AP configuration data has changed. The vfio_ap
device driver registers a callback function for this callback that hot
plugs each queue and control domain added to the AP configuration for each
guest using them in a single hot plug operation.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The matrix of adapters and domains configured in a guest's APCB may
differ from the matrix of adapters and domains assigned to the matrix mdev,
so this patch introduces a sysfs attribute to display the matrix of
adapters and domains that are or will be assigned to the APCB of a guest
that is or will be using the matrix mdev. For a matrix mdev denoted by
$uuid, the guest matrix can be displayed as follows:
cat /sys/devices/vfio_ap/matrix/$uuid/guest_matrix
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's implement the callback to indicate when an APQN
is in use by the vfio_ap device driver. The callback is
invoked whenever a change to the apmask or aqmask would
result in one or more queue devices being removed from the driver. The
vfio_ap device driver will indicate a resource is in use
if the APQN of any of the queue devices to be removed are assigned to
any of the matrix mdevs under the driver's control.
There is potential for a deadlock condition between the
matrix_dev->guests_lock used to lock the guest during assignment of
adapters and domains and the ap_perms_mutex locked by the AP bus when
changes are made to the sysfs apmask/aqmask attributes.
The AP Perms lock controls access to the objects that store the adapter
numbers (ap_perms) and domain numbers (aq_perms) for the sysfs
/sys/bus/ap/apmask and /sys/bus/ap/aqmask attributes. These attributes
identify which queues are reserved for the zcrypt default device drivers.
Before allowing a bit to be removed from either mask, the AP bus must check
with the vfio_ap device driver to verify that none of the queues are
assigned to any of its mediated devices.
The apmask/aqmask attributes can be written or read at any time from
userspace, so care must be taken to prevent a deadlock with asynchronous
operations that might be taking place in the vfio_ap device driver. For
example, consider the following:
1. A system administrator assigns an adapter to a mediated device under the
control of the vfio_ap device driver. The driver will need to first take
the matrix_dev->guests_lock to potentially hot plug the adapter into
the KVM guest.
2. At the same time, a system administrator sets a bit in the sysfs
/sys/bus/ap/ap_mask attribute. To complete the operation, the AP bus
must:
a. Take the ap_perms_mutex lock to update the object storing the values
for the /sys/bus/ap/ap_mask attribute.
b. Call the vfio_ap device driver's in-use callback to verify that the
queues now being reserved for the default zcrypt drivers are not
assigned to a mediated device owned by the vfio_ap device driver. To
do the verification, the in-use callback function takes the
matrix_dev->guests_lock, but has to wait because it is already held
by the operation in 1 above.
3. The vfio_ap device driver calls an AP bus function to verify that the
new queues resulting from the assignment of the adapter in step 1 are
not reserved for the default zcrypt device driver. This AP bus function
tries to take the ap_perms_mutex lock but gets stuck waiting for the
waiting for the lock due to step 2a above.
Consequently, we have the following deadlock situation:
matrix_dev->guests_lock locked (1)
ap_perms_mutex lock locked (2a)
Waiting for matrix_dev->gusts_lock (2b) which is currently held (1)
Waiting for ap_perms_mutex lock (3) which is currently held (2a)
To prevent this deadlock scenario, the function called in step 3 will no
longer take the ap_perms_mutex lock and require the caller to take the
lock. The lock will be the first taken by the adapter/domain assignment
functions in the vfio_ap device driver to maintain the proper locking
order.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When an adapter or domain is unassigned from an mdev attached to a KVM
guest, one or more of the guest's queues may get dynamically removed. Since
the removed queues could get re-assigned to another mdev, they need to be
reset. So, when an adapter or domain is unassigned from the mdev, the
queues that are removed from the guest's AP configuration (APCB) will be
reset.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When an AP queue device is probed or removed, if the mediated device is
attached to a KVM guest, the mediated device's adapter, domain and
control domain bitmaps must be filtered to update the guest's APCB and if
any changes are detected, the guest's APCB must then be hot plugged into
the guest to reflect those changes to the guest.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's hot plug an adapter, domain or control domain into the guest when it
is assigned to a matrix mdev that is attached to a KVM guest. Likewise,
let's hot unplug an adapter, domain or control domain from the guest when
it is unassigned from a matrix_mdev that is attached to a KVM guest.
Whenever an assignment or unassignment of an adapter, domain or control
domain is performed, the APQNs and control domains assigned to the matrix
mdev will be filtered and assigned to the AP control block
(APCB) that supplies the AP configuration to the guest so that no
adapter, domain or control domain that is not in the host's AP
configuration nor any APQN that does not reference a queue device bound
to the vfio_ap device driver is assigned.
After updating the APCB, if the mdev is in use by a KVM guest, it is
hot plugged into the guest to dynamically provide access to the adapters,
domains and control domains provided via the newly refreshed APCB.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The callback functions for probing and removing a queue device must take
and release the locks required to perform a dynamic update of a guest's
APCB in the proper order.
The proper order for taking the locks is:
matrix_dev->guests_lock => kvm->lock => matrix_dev->mdevs_lock
The proper order for releasing the locks is:
matrix_dev->mdevs_lock => kvm->lock => matrix_dev->guests_lock
A new helper function is introduced to be used by the probe callback to
acquire the required locks. Since the probe callback only has
access to a queue device when it is called, the helper function will find
the ap_matrix_mdev object to which the queue device's APQN is assigned and
return it so the KVM guest to which the mdev is attached can be dynamically
updated.
Note that in order to find the ap_matrix_mdev (matrix_mdev) object, it is
necessary to search the matrix_dev->mdev_list. This presents a
locking order dilemma because the matrix_dev->mdevs_lock can't be taken to
protect against changes to the list while searching for the matrix_mdev to
which a queue device's APQN is assigned. This is due to the fact that the
proper locking order requires that the matrix_dev->mdevs_lock be taken
after both the matrix_mdev->kvm->lock and the matrix_dev->mdevs_lock.
Consequently, the matrix_dev->guests_lock will be used to protect against
removal of a matrix_mdev object from the list while a queue device is
being probed. This necessitates changes to the mdev probe/remove
callback functions to take the matrix_dev->guests_lock prior to removing
a matrix_mdev object from the list.
A new macro is also introduced to acquire the locks required to dynamically
update the guest's APCB in the proper order when a queue device is
removed.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The functions backing the matrix mdev's sysfs attribute interfaces to
assign/unassign adapters, domains and control domains must take and
release the locks required to perform a dynamic update of a guest's APCB
in the proper order.
The proper order for taking the locks is:
matrix_dev->guests_lock => kvm->lock => matrix_dev->mdevs_lock
The proper order for releasing the locks is:
matrix_dev->mdevs_lock => kvm->lock => matrix_dev->guests_lock
Two new macros are introduced for this purpose: One to take the locks and
the other to release the locks. These macros will be used by the
assignment/unassignment functions to prepare for dynamic update of
the KVM guest's APCB.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The group notifier that handles the VFIO_GROUP_NOTIFY_SET_KVM event must
use the required locks in proper locking order to dynamically update the
guest's APCB. The proper locking order is:
1. matrix_dev->guests_lock: required to use the KVM pointer to
update a KVM guest's APCB.
2. matrix_mdev->kvm->lock: required to update a KVM guest's APCB.
3. matrix_dev->mdevs_lock: required to store or access the data
stored in a struct ap_matrix_mdev instance.
Two macros are introduced to acquire and release the locks in the proper
order. These macros are now used by the group notifier functions.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The vfio_ap device driver registers for notification when the pointer to
the KVM object for a guest is set. Recall that the KVM lock (kvm->lock)
mutex must be taken outside of the matrix_dev->lock mutex to prevent the
reporting by lockdep of a circular locking dependency (a.k.a., a lockdep
splat):
* see commit 0cc00c8d40 ("Fix circular lockdep when setting/clearing
crypto masks")
* see commit 86956e7076 ("replace open coded locks for
VFIO_GROUP_NOTIFY_SET_KVM notification")
With the introduction of support for hot plugging/unplugging AP devices
passed through to a KVM guest, a new guests_lock mutex is introduced to
ensure the proper locking order is maintained:
struct ap_matrix_dev {
...
struct mutex guests_lock;
...
}
The matrix_dev->guests_lock controls access to the matrix_mdev instances
that hold the state for AP devices that have been passed through to a
KVM guest. This lock must be held to control access to the KVM pointer
(matrix_mdev->kvm) while the vfio_ap device driver is using it to
plug/unplug AP devices passed through to the KVM guest.
Keep in mind, the proper locking order must be maintained whenever
dynamically updating a KVM guest's APCB to plug/unplug adapters, domains
and control domains:
1. matrix_dev->guests_lock: required to use the KVM pointer - stored in
a struct ap_matrix_mdev instance - to update a KVM guest's APCB
2. matrix_mdev->kvm->lock: required to update a guest's APCB
3. matrix_dev->mdevs_lock: required to access data stored in a
struct ap_matrix_mdev instance.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The matrix_dev->lock mutex is being renamed to matrix_dev->mdevs_lock to
better reflect its purpose, which is to control access to the state of the
mediated devices under the control of the vfio_ap device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The current implementation does not allow assignment of an AP adapter or
domain to an mdev device if each APQN resulting from the assignment
does not reference an AP queue device that is bound to the vfio_ap device
driver. This patch allows assignment of AP resources to the matrix mdev as
long as the APQNs resulting from the assignment:
1. Are not reserved by the AP BUS for use by the zcrypt device drivers.
2. Are not assigned to another matrix mdev.
The rationale behind this is that the AP architecture does not preclude
assignment of APQNs to an AP configuration profile that are not available
to the system.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Refresh the guest's APCB by filtering the APQNs and control domain numbers
assigned to the matrix mdev.
Filtering of APQNs:
-----------------
APQNs that do not reference an AP queue device bound to the vfio_ap device
driver must be filtered from the APQNs assigned to the matrix mdev before
they can be assigned to the guest's APCB. Given that the APQNs are
configured in the guest's APCB as a matrix of APIDs (adapters) and APQIs
(domains), it is not possible to filter an individual APQN. For example,
suppose the matrix of APQNs is structured as follows:
APIDs
3 4 5
0 (3,0) (4,0) (5,0)
APQIs 1 (3,1) (4,1) (5,1)
2 (3,2) (4,2) (5,2)
Now suppose APQN (4,1) does not reference a queue device bound to the
vfio_ap device driver. If we filter APID 4, the APQNs (4,0), (4,1) and
(4,2) will be removed. Similarly, if we filter domain 1, APQNs (3,1),
(4,1) and (5,1) will be removed.
To resolve this dilemma, the choice was made to filter the APID - in this
case 4 - from the guest's APCB. The reason for this design decision is
because the APID references an AP adapter which is a real hardware device
that can be physically installed, removed, enabled or disabled; whereas, a
domain is a partition within the adapter. It therefore better reflects
reality to remove the APID from the guest's APCB.
Filtering of control domains:
----------------------------
Any control domains that are not assigned to the host's AP configuration
will be filtered from those assigned to the matrix mdev before assigning
them to the guest's APCB.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The APCB is a field within the CRYCB that provides the AP configuration
to a KVM guest. Let's introduce a shadow copy of the KVM guest's APCB and
maintain it for the lifespan of the guest.
The shadow APCB serves the following purposes:
1. The shadow APCB can be maintained even when the mediated device is not
currently in use by a KVM guest. Since the mediated device's AP
configuration is filtered to ensure that no AP queues are passed through
to the KVM guest that are not bound to the vfio_ap device driver or
available to the host, the mediated device's AP configuration may differ
from the guest's. Having a shadow of a guest's APCB allows us to provide
a sysfs interface to view the guest's APCB even if the mediated device
is not currently passed through to a KVM guest. This can aid in
problem determination when the guest is unexpectedly missing AP
resources.
2. If filtering was done in-place for the real APCB, the guest could pick
up a transient state. Doing the filtering on a shadow and transferring
the AP configuration to the real APCB after the guest is started or when
AP resources are assigned to or unassigned from the mediated device, or
when the host configuration changes, the guest's AP configuration will
never be in a transient state.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's create links between each queue device bound to the vfio_ap device
driver and the matrix mdev to which the queue's APQN is assigned. The idea
is to facilitate efficient retrieval of the objects representing the queue
devices and matrix mdevs as well as to verify that a queue assigned to
a matrix mdev is bound to the driver.
The links will be created as follows:
* When the queue device is probed, if its APQN is assigned to a matrix
mdev, the structures representing the queue device and the matrix mdev
will be linked.
* When an adapter or domain is assigned to a matrix mdev, for each new
APQN assigned that references a queue device bound to the vfio_ap
device driver, the structures representing the queue device and the
matrix mdev will be linked.
The links will be removed as follows:
* When the queue device is removed, if its APQN is assigned to a matrix
mdev, the link from the structure representing the matrix mdev to the
structure representing the queue will be removed. Since the storage
allocated for the vfio_ap_queue will be freed, there is no need to
remove the link to the matrix_mdev to which the queue's APQN is
assigned.
* When an adapter or domain is unassigned from a matrix mdev, for each
APQN unassigned that references a queue device bound to the vfio_ap
device driver, the structures representing the queue device and the
matrix mdev will be unlinked.
* When an mdev is removed, the link from any queues assigned to the mdev
to the mdev will be removed.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Let's move the probe and remove callbacks into the vfio_ap_ops.c
file to keep all code related to managing queues in a single file. This
way, all functions related to queue management can be removed from the
vfio_ap_private.h header file defining the public interfaces for the
vfio_ap device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This patch refactors the vfio_ap device driver to use the AP bus's
ap_get_qdev() function to retrieve the vfio_ap_queue struct containing
information about a queue that is bound to the vfio_ap device driver.
The bus's ap_get_qdev() function retrieves the queue device from a
hashtable keyed by APQN. This is much more efficient than looping over
the list of devices attached to the AP bus by several orders of
magnitude.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
- Make RESERVE_BRK() work again with older binutils. The recent
'simplification' broke that.
- Make early #VE handling increment RIP when successful.
- Make the #VE code consistent vs. the RIP adjustments and add comments.
- Handle load_unaligned_zeropad() across page boundaries correctly in #VE
when the second page is shared.
-----BEGIN PGP SIGNATURE-----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=sRtG
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Make RESERVE_BRK() work again with older binutils. The recent
'simplification' broke that.
- Make early #VE handling increment RIP when successful.
- Make the #VE code consistent vs. the RIP adjustments and add
comments.
- Handle load_unaligned_zeropad() across page boundaries correctly in
#VE when the second page is shared.
* tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
x86/tdx: Clarify RIP adjustments in #VE handler
x86/tdx: Fix early #VE handling
x86/mm: Fix RESERVE_BRK() for older binutils
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKvHbwTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoQlsEADC7BotE1Mi8HITScIlHT19bkZ7Bm6M
g46RCtUw0u+lo7BclIetNYGWQ0z+D+1DbmZTBv5D22N/Wd6MrwOuuwRVtJ2dEosF
l/EK1qKLxCGMdQ1x0KOmrjzHB4WmcUH0pQwDHa5N5s5IyrJRRFHtoLk3EYp6QIhi
mIZTJgGUEe/aS7BtFM5xARprm7JxdbhXgXVbnC1ctzpOi2y6O7F4Ek3x4j5zTGV/
49iuO2ljqmKdoFlPa1fhuw+O9sTUf+RmKLPEU+2nm7Wg+wlIwKIB3yDDBoZ9Q7lm
YdorW0/506x4qOwa8KAjxXEb2qgZkL/fQcMS0jQQKNNDD8GHU+3YdjCNbrmZjA+T
Ib0rs9YsxgLstnmqzU3QfarhgtdzIMhzF0cofoFDK0a8tHLqOhZF4j7wLmYo52ec
6Hrt8IvJPW2b3TC6KfRAF+uWsDDoaum0OOFVjVu1b9G6fFf0i8h5JGWdkJh8cau9
0qvAYg0sDjRf7zAZ6kbbGDVCljECyypIdCBF3ihA6yMhJX16VihEWTJyqIaoO+a0
0XzPvkhX+6mY0kqn+5HvvhLEY4POA8pFKeTPx4eABvKnw7m01I9cJfHa7HEBQHe6
ZJA7qWMBRrPfK2Ogrx8zohj2sOdHMHlIQU+6Ai+7+BHs13Nje4umGMu2YuZrnfIF
gQ1ayCN8OsUwVA==
=12KJ
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull build tooling updates from Thomas Gleixner:
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
* tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage
faddr2line: Fix overlapping text section failures, the sequel
objtool: Fix obsolete reference to CONFIG_X86_SMAP
balance_push(). sched_setscheduler() spliced the balance callbacks accross
a lock break which makes an interleaving schedule() observe an empty list.
-----BEGIN PGP SIGNATURE-----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=k54w
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix plugging a race between sched_setscheduler()
and balance_push().
sched_setscheduler() spliced the balance callbacks accross a lock
break which makes it possible for an interleaving schedule() to
observe an empty list"
* tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix balance_push() vs __sched_setscheduler()
worked until prandom_u32() was switched to the real random generator, which
takes a spinlock for extraction, which does not work on RT when invoked
from atomic contexts. lockdep has no requirement for real random numbers
and it turns out sched_clock() is good enough to create the cookie. That
works everywhere and is faster.
-----BEGIN PGP SIGNATURE-----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=iuyB
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull lockdep fix from Thomas Gleixner:
"A RT fix for lockdep.
lockdep invokes prandom_u32() to create cookies. This worked until
prandom_u32() was switched to the real random generator, which takes a
spinlock for extraction, which does not work on RT when invoked from
atomic contexts.
lockdep has no requirement for real random numbers and it turns out
sched_clock() is good enough to create the cookie. That works
everywhere and is faster"
* tag 'locking-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Use sched_clock() for random numbers
Here are some small char/misc driver fixes for 5.19-rc3 that resolve
some reported issues.
They include:
- mei driver fixes
- comedi driver fix
- rtsx build warning fix
- fsl-mc-bus driver fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYq8I/Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZlgCdEnqmS5N5deU40WD0CwRchzg1PCsAnAz0XUsz
yAj2wz/dh6H741FisaoO
=Dfta
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes for real from Greg KH:
"Let's tag the proper branch this time...
Here are some small char/misc driver fixes for 5.19-rc3 that resolve
some reported issues.
They include:
- mei driver fixes
- comedi driver fix
- rtsx build warning fix
- fsl-mc-bus driver fix
All of these have been in linux-next for a while with no reported
issues"
This is what the merge in commit f0ec9c65a8 _should_ have merged, but
Greg fat-fingered the pull request and I got some small changes from
linux-next instead there. Credit to Nathan Chancellor for eagle-eyes.
Link: https://lore.kernel.org/all/Yqywy+Md2AfGDu8v@dev-arch.thelio-3990X/
* tag 'char-misc-5.19-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove()
mei: me: add raptor lake point S DID
mei: hbm: drop capability response on early shutdown
mei: me: set internal pg flag to off on hardware reset
misc: rtsx: Fix clang -Wsometimes-uninitialized in rts5261_init_from_hw()
comedi: vmk80xx: fix expression for tx buffer size
-----BEGIN PGP SIGNATURE-----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=WbSS
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"MAINTAINERS rectifications and a few minor driver fixes"
* tag 'i2c-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: Fix an error handling path in mtk_i2c_probe()
i2c: designware: Use standard optional ref clock implementation
MAINTAINERS: core DT include belongs to core
MAINTAINERS: add include/dt-bindings/i2c to I2C SUBSYSTEM HOST DRIVERS
i2c: npcm7xx: Add check for platform_driver_register
MAINTAINERS: Update Synopsys DesignWare I2C to Supported
- Fix a bug where inode flag changes would accidentally drop nrext64.
- Fix a race condition when toggling LARP mode.
-----BEGIN PGP SIGNATURE-----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=vvDX
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"There's not a whole lot this time around (I'm still on vacation) but
here are some important fixes for new features merged in -rc1:
- Fix a bug where inode flag changes would accidentally drop nrext64
- Fix a race condition when toggling LARP mode"
* tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: preserve DIFLAG2_NREXT64 when setting other inode attributes
xfs: fix variable state usage
xfs: fix TOCTOU race involving the new logged xattrs control knob
or error injection. Also fix up how test_dummy_encryption mount
option is handled for the new mount API. Finally, fix/cleanup a
number of comments and ext4 Documentation files.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmKuYpcACgkQ8vlZVpUN
gaMXwwf8DSHJ3gI2Lo0wrzJm7KSS0C+HK29/rtLCZdxECQsZR156ZzSF3zAFKOwK
Yx3RJwiFxrciUUytY/MWTyalCk+M8oW1093SfRqNNZCbZNi33acnbTqioa7INnDw
snFGGEU1y0M0AUduxNWPr71P80sTyQa0ZplIc4YeR98zzMvoWgi1dvo4wNdtJNQb
Gb0FtBhgP+IeK50eBlK4O0Eg5kqd0V5OeTLUYUfsWqU28ap8dHYE48I6sIdHx6az
sa6b2+YRuBxJUV61FNujuVtkDgUHXtXM97kkGpywRSLjo4iFxlQvX9Ew4lBD9RDI
b0YHVzK/DU9M3VfiYgzGwShCb/M68w==
=NtNY
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a variety of bugs, many of which were found by folks using fuzzing
or error injection.
Also fix up how test_dummy_encryption mount option is handled for the
new mount API.
Finally, fix/cleanup a number of comments and ext4 Documentation
files"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix a doubled word "need" in a comment
ext4: add reserved GDT blocks check
ext4: make variable "count" signed
ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4: fix bug_on ext4_mb_use_inode_pa
ext4: fix up test_dummy_encryption handling for new mount API
ext4: use kmemdup() to replace kmalloc + memcpy
ext4: fix super block checksum incorrect after mount
ext4: improve write performance with disabled delalloc
ext4: fix warning when submitting superblock in ext4_commit_super()
ext4, doc: remove unnecessary escaping
ext4: fix incorrect comment in ext4_bio_write_page()
fs: fix jbd2_journal_try_to_free_buffers() kernel-doc comment
-----BEGIN PGP SIGNATURE-----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=oBRl
-----END PGP SIGNATURE-----
Merge tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two cifs debugging improvements - one found to deal with debugging a
multichannel problem and one for a recent fallocate issue
This does include the two larger multichannel reconnect (dynamically
adjusting interfaces on reconnect) patches, because we recently found
an additional problem with multichannel to one server type that I want
to include at the same time"
* tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: when a channel is not found for server, log its connection id
smb3: add trace point for SMB2_set_eof
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
========
BUG: kernel NULL pointer dereference, address: 0000000000000028
CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
...
RIP: 0010:ext4_flex_group_add+0xe08/0x2570
...
Call Trace:
<TASK>
ext4_resize_fs+0xbec/0x1660
__ext4_ioctl+0x1749/0x24e0
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xa6/0x110
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2dd739617b
========
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().
Fixes: 46c116b920 ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
ext4_mb_new_blocks+0x9df/0x5d30
ext4_ext_map_blocks+0x1803/0x4d80
ext4_map_blocks+0x3a4/0x1a10
ext4_writepages+0x126d/0x2c30
do_writepages+0x7f/0x1b0
__filemap_fdatawrite_range+0x285/0x3b0
file_write_and_wait_range+0xb1/0x140
ext4_sync_file+0x1aa/0xca0
vfs_fsync_range+0xfb/0x260
do_fsync+0x48/0xa0
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
do_fsync
vfs_fsync_range
ext4_sync_file
file_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_mb_new_blocks
ext4_mb_normalize_request
>>> start + size <= ac->ac_o_ex.fe_logical
ext4_mb_regular_allocator
ext4_mb_simple_scan_group
ext4_mb_use_best_found
ext4_mb_new_preallocation
ext4_mb_new_inode_pa
ext4_mb_use_inode_pa
>>> set ac->ac_b_ex.fe_len <= 0
ext4_mb_mark_diskspace_used
>>> BUG_ON(ac->ac_b_ex.fe_len <= 0);
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org
Fixes: cd648b8a8f ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function. That doesn't work well
with the new mount API, which split these into separate steps.
This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.
Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220526040412.173025-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got issue as follows:
[home]# mount /dev/sda test
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
[home]# dmesg
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda): Errors on filesystem, clearing orphan list.
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none.
[home]# debugfs /dev/sda
debugfs 1.46.5 (30-Dec-2021)
Checksum errors in superblock! Retrying...
Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update
super block checksum.
To solve above issue, defer update super block checksum after
ext4_orphan_cleanup.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525012904.1604737-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
cifs_ses_get_chan_index gets the index for a given server pointer.
When a match is not found, we warn about a possible bug.
However, printing details about the non-matching server could be
more useful to debug here.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
load_unaligned_zeropad() can lead to unwanted loads across page boundaries.
The unwanted loads are typically harmless. But, they might be made to
totally unrelated or even unmapped memory. load_unaligned_zeropad()
relies on exception fixup (#PF, #GP and now #VE) to recover from these
unwanted loads.
In TDX guests, the second page can be shared page and a VMM may configure
it to trigger #VE.
The kernel assumes that #VE on a shared page is an MMIO access and tries to
decode instruction to handle it. In case of load_unaligned_zeropad() it
may result in confusion as it is not MMIO access.
Fix it by detecting split page MMIO accesses and failing them.
load_unaligned_zeropad() will recover using exception fixups.
The issue was discovered by analysis and reproduced artificially. It was
not triggered during testing.
[ dhansen: fix up changelogs and comments for grammar and clarity,
plus incorporate Kirill's off-by-one fix]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220614120135.14812-4-kirill.shutemov@linux.intel.com
- Bugfixes:
- Add FMODE_CAN_ODIRECT support to NFSv4 so opens don't fail
- Fix trunking detection & cl_max_connect setting
- Avoid pnfs_update_layout() livelocks
- Don't keep retrying pNFS if the server replies with NFS4ERR_UNAVAILABLE
-----BEGIN PGP SIGNATURE-----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=nTJk
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Add FMODE_CAN_ODIRECT support to NFSv4 so opens don't fail
- Fix trunking detection & cl_max_connect setting
- Avoid pnfs_update_layout() livelocks
- Don't keep retrying pNFS if the server replies with NFS4ERR_UNAVAILABLE
* tag 'nfs-for-5.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4: Add FMODE_CAN_ODIRECT after successful open of a NFS4.x file
sunrpc: set cl_max_connect when cloning an rpc_clnt
pNFS: Avoid a live lock condition in pnfs_update_layout()
pNFS: Don't keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmKs17UUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vzlVQ//Qygje8u1x0qQqGFykMf3+cev2ECV
/sfOHtRoG9qZ4gKQOGShr9gyeV+9VFl0+CEJE4z9/YiAnoOr5JMAMixYRjHQU9MB
k3TFkDqD0KBgmXdAubVP5HQGZgA+mryvtEhr5rm45PooJJSjuh1ds87YYO+Z/t7s
c2AzvpHFLjECB6LRHqHieyp4CeWn5tw8im7uMUmfKkkXF5ckqw3e+7gwJzRrAukg
GgbLb2JZLzXSl1HOx/2GvPW8RzyXRbbJmpvu9LsNKeoqP006F3chDVIncqG3Q9QQ
LvrjudC/eY/2Fee3tpP6gjl9A5ALvXT/k4gTw4Lwm8OlaxrYZ3gwcBHZepp3F08s
qVCncjFooeHAMiJDkGvtf6N8k8VnOy4zvg2qDpKOl2NO3jH95nGi0LGMf0/GXvfh
P4bwqjGcWKSo9C2amagZ49rzaJBIQRms8ItM6WPvCYirjyYi3PeUMl/dylstbnuq
DQuprZtgOEGlPGUg/CO4fCpCIkKzpvOV6157z39mZS5HOT5ugvF4k+hwSxZd0hsM
rJI7Te48Z46Y/qoFesgOglJwwEZs4RqHAvMTGC+V5Ftj9gHe7wo2oOxlhCyFW1Qd
jec3UhXEzTVxnjsu7peHyfwwmGWFUkG16P17hWpncpG6azW1dybQOCsRy21/F+q2
i1nd61lXpuhKQKQ=
=5y1d
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert clipping of PCI host bridge windows to avoid E820 regions,
which broke several machines by forcing unnecessary BAR reassignments
(Hans de Goede)"
* tag 'pci-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
x86/PCI: Revert "x86/PCI: Clip only host bridge windows for E820 regions"
-----BEGIN PGP SIGNATURE-----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=iiXX
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
"Make the global console_sem available for CPU that is handling panic()
or shutdown.
This is an old problem when an existing console lock owner might block
console output, but it became more visible with the kthreads"
* tag 'printk-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Wait for the global console lock when the system is going down
printk: Block console kthreads when direct printing will be required
This reverts commit 4c5e242d3e.
Prior to 4c5e242d3e ("x86/PCI: Clip only host bridge windows for E820
regions"), E820 regions did not affect PCI host bridge windows. We only
looked at E820 regions and avoided them when allocating new MMIO space.
If firmware PCI bridge window and BAR assignments used E820 regions, we
left them alone.
After 4c5e242d3e, we removed E820 regions from the PCI host bridge
windows before looking at BARs, so firmware assignments in E820 regions
looked like errors, and we moved things around to fit in the space left
(if any) after removing the E820 regions. This unnecessary BAR
reassignment broke several machines.
Guilherme reported that Steam Deck fails to boot after 4c5e242d3e. We
clipped the window that contained most 32-bit BARs:
BIOS-e820: [mem 0x00000000a0000000-0x00000000a00fffff] reserved
acpi PNP0A08:00: clipped [mem 0x80000000-0xf7ffffff window] to [mem 0xa0100000-0xf7ffffff window] for e820 entry [mem 0xa0000000-0xa00fffff]
which forced us to reassign all those BARs, for example, this NVMe BAR:
pci 0000:00:01.2: PCI bridge to [bus 01]
pci 0000:00:01.2: bridge window [mem 0x80600000-0x806fffff]
pci 0000:01:00.0: BAR 0: [mem 0x80600000-0x80603fff 64bit]
pci 0000:00:01.2: can't claim window [mem 0x80600000-0x806fffff]: no compatible bridge window
pci 0000:01:00.0: can't claim BAR 0 [mem 0x80600000-0x80603fff 64bit]: no compatible bridge window
pci 0000:00:01.2: bridge window: assigned [mem 0xa0100000-0xa01fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0xa0100000-0xa0103fff 64bit]
All the reassignments were successful, so the devices should have been
functional at the new addresses, but some were not.
Andy reported a similar failure on an Intel MID platform. Benjamin
reported a similar failure on a VMWare Fusion VM.
Note: this is not a clean revert; this revert keeps the later change to
make the clipping dependent on a new pci_use_e820 bool, moving the checking
of this bool to arch_remove_reservations().
[bhelgaas: commit log, add more reporters and testers]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216109
Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Reported-by: Jongman Heo <jongman.heo@gmail.com>
Fixes: 4c5e242d3e ("x86/PCI: Clip only host bridge windows for E820 regions")
Link: https://lore.kernel.org/r/20220612144325.85366-1-hdegoede@redhat.com
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
- Revert the moving of the jump labels initialisation before
setup_machine_fdt(). The bug was fixed in drivers/char/random.c.
- Ftrace fixes: branch range check and consistent handling of PLTs.
- Clean rather than invalidate FROM_DEVICE buffers at start of DMA
transfer (safer if such buffer is mapped in user space). A cache
invalidation is done already at the end of the transfer.
- A couple of clean-ups (unexport symbol, remove unused label).
-----BEGIN PGP SIGNATURE-----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=Q14k
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Revert the moving of the jump labels initialisation before
setup_machine_fdt(). The bug was fixed in drivers/char/random.c.
- Ftrace fixes: branch range check and consistent handling of PLTs.
- Clean rather than invalidate FROM_DEVICE buffers at start of DMA
transfer (safer if such buffer is mapped in user space). A cache
invalidation is done already at the end of the transfer.
- A couple of clean-ups (unexport symbol, remove unused label).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Don't invalidate FROM_DEVICE buffers at start of DMA transfer
arm64/cpufeature: Unexport set_cpu_feature()
arm64: ftrace: remove redundant label
arm64: ftrace: consistently handle PLTs.
arm64: ftrace: fix branch range checks
Revert "arm64: Initialize jump labels before setup_machine_fdt()"
* A fix for the PolarFire SOC's device tree.
* A handful of fixes for the recently added Svpmbt support.
* An improvement to the Kconfig text for Svpbmt.
-----BEGIN PGP SIGNATURE-----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=wL7+
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the PolarFire SOC's device tree
- A handful of fixes for the recently added Svpmbt support
- An improvement to the Kconfig text for Svpbmt
* tag 'riscv-for-linus-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Improve description for RISCV_ISA_SVPBMT Kconfig symbol
riscv: drop cpufeature_apply_feature tracking variable
riscv: fix dependency for t-head errata
riscv: dts: microchip: re-add pdma to mpfs device tree
Tony Krowiak