[ Upstream commit f1553c9894b4dbeb10a2ab15ab1aa113b3b4047c ]
Several places call ip6mr_get_table() with no RCU nor RTNL lock.
Add RCU protection inside such helper and provide a lockless variant
for the few callers that already acquired the relevant lock.
Note that some users additionally reference the table outside the RCU
lock. That is actually safe as the table deletion can happen only
after all table accesses are completed.
Fixes: e2d57766e6 ("net: Provide compat support for SIOCGETMIFCNT_IN6 and SIOCGETSGCNT_IN6.")
Fixes: d7c31cbde4 ("net: ip6mr: add RTM_GETROUTE netlink op")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00b5b7aab9e422d00d5a9d03d7e0760a76b5d57f ]
RFC8981 section 3.4 says that existing temporary addresses must have their
lifetimes adjusted so that no temporary addresses should ever remain "valid"
or "preferred" longer than the incoming SLAAC Prefix Information. This would
strongly imply in Linux's case that if the "mngtmpaddr" address is deleted or
un-flagged as such, its corresponding temporary addresses must be cleared out
right away.
But now the temporary address is renewed even after ‘mngtmpaddr’ is removed
or becomes unmanaged as manage_tempaddrs() set temporary addresses
prefered/valid time to 0, and later in addrconf_verify_rtnl() all checkings
failed to remove the addresses. Fix this by deleting the temporary address
directly for these situations.
Fixes: 778964f2fd ("ipv6/addrconf: fix timing bug in tempaddr regen")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb02688c5c45c3e7af7e71f036a7144f5639cbfe ]
The CI is hitting some aperiodic hangup at device removal time in the
pmtu.sh self-test:
unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 6
ref_tracker: veth_A-R1@ffff888013df15d8 has 1/5 users at
dst_init+0x84/0x4a0
dst_alloc+0x97/0x150
ip6_dst_alloc+0x23/0x90
ip6_rt_pcpu_alloc+0x1e6/0x520
ip6_pol_route+0x56f/0x840
fib6_rule_lookup+0x334/0x630
ip6_route_output_flags+0x259/0x480
ip6_dst_lookup_tail.constprop.0+0x5c2/0x940
ip6_dst_lookup_flow+0x88/0x190
udp_tunnel6_dst_lookup+0x2a7/0x4c0
vxlan_xmit_one+0xbde/0x4a50 [vxlan]
vxlan_xmit+0x9ad/0xf20 [vxlan]
dev_hard_start_xmit+0x10e/0x360
__dev_queue_xmit+0xf95/0x18c0
arp_solicit+0x4a2/0xe00
neigh_probe+0xaa/0xf0
While the first suspect is the dst_cache, explicitly tracking the dst
owing the last device reference via probes proved such dst is held by
the nexthop in the originating fib6_info.
Similar to commit f5b51fe804 ("ipv6: route: purge exception on
removal"), we need to explicitly release the originating fib info when
disconnecting a to-be-removed device from a live ipv6 dst: move the
fib6_info cleanup into ip6_dst_ifdown().
Tested running:
./pmtu.sh cleanup_ipv6_exception
in a tight loop for more than 400 iterations with no spat, running an
unpatched kernel I observed a splat every ~10 iterations.
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/604c45c188c609b732286b47ac2a451a40f6cf6d.1730828007.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4cb4a1391dcdc640c4ade003aaf0ee19cc8d509 ]
Toke mentioned unrcu_pointer() existence, allowing
to remove some of the ugly casts we have when using
xchg() for rcu protected pointers.
Also make inet_rcv_compat const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240604111603.45871-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: eb02688c5c45 ("ipv6: release nexthop on device removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8469721034300bbb6dec5b4bf32492c95e16a0c ]
The series in the "fixes" tag added the ability to consider L4 attributes
in routing rules.
The dst lookup on the outer packet of encapsulated traffic in the xfrm
code was not adapted to this change, thus routing behavior that relies
on L4 information is not respected.
Pass the ip protocol information when performing dst lookups.
Fixes: a25724b05a ("Merge branch 'fib_rules-support-sport-dport-and-proto-match'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05ef7055debc804e8083737402127975e7244fc4 ]
We need to init l3mdev unconditionally, else main routing table is searched
and incorrect result is returned unless strict (iif keyword) matching is
requested.
Next patch adds a selftest for this.
Fixes: 2a8a7c0eaa ("netfilter: nft_fib: Fix for rpath check with VRF devices")
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1761
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc56878ca1c288e49b5cbb43860a5938e3463654 ]
If CONFIG_BRIDGE_NETFILTER is not enabled, which is the case for x86_64
defconfig, then building nf_reject_ipv4.c and nf_reject_ipv6.c with W=1
using gcc-14 results in the following warnings, which are treated as
errors:
net/ipv4/netfilter/nf_reject_ipv4.c: In function 'nf_send_reset':
net/ipv4/netfilter/nf_reject_ipv4.c:243:23: error: variable 'niph' set but not used [-Werror=unused-but-set-variable]
243 | struct iphdr *niph;
| ^~~~
cc1: all warnings being treated as errors
net/ipv6/netfilter/nf_reject_ipv6.c: In function 'nf_send_reset6':
net/ipv6/netfilter/nf_reject_ipv6.c:286:25: error: variable 'ip6h' set but not used [-Werror=unused-but-set-variable]
286 | struct ipv6hdr *ip6h;
| ^~~~
cc1: all warnings being treated as errors
Address this by reducing the scope of these local variables to where
they are used, which is code only compiled when CONFIG_BRIDGE_NETFILTER
enabled.
Compile tested and run through netfilter selftests.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/netfilter-devel/20240906145513.567781-1-andriy.shevchenko@linux.intel.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8c2bd38b95f75f3d2a08c93e35303e26d480d24e upstream.
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.
Fixes: c0303efeab ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 93c21077bb9ba08807c459982d440dbbee4c7af3 ]
The rpl sr tunnel code contains calls to dst_cache_*() which are
only present when the dst cache is built.
Select DST_CACHE to build the dst cache, similar to other kconfig
options in the same file.
Compiling the rpl sr tunnel without DST_CACHE will lead to linker
errors.
Fixes: a7a29f9c36 ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c84b0aa28b9e73e8c4b4ce038269469434ae372 ]
Free the skb before returning from rpl_input when skb_cow_head() fails.
Use a "drop" label and goto instructions.
Fixes: a7a29f9c36 ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240911174557.11536-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61e2bbafb00e4b9a5de45e6448a7b6b818658576 ]
When I was doing some experiments, I found that when using the first
parameter, namely, struct net, in ip_metrics_convert() always triggers NULL
pointer crash. Then I digged into this part, realizing that we can remove
this one due to its uselessness.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d5ff7e339d04622d8282661df36151906d0e1c7 ]
If skb_expand_head() returns NULL, skb has been freed
and the associated dst/idev could also have been freed.
We must use rcu_read_lock() to prevent a possible UAF.
Fixes: 0c9f227bee ("ipv6: use skb_expand_head in ip6_xmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da273b377ae0d9bd255281ed3c2adb228321687b ]
If skb_expand_head() returns NULL, skb has been freed
and associated dst/idev could also have been freed.
We need to hold rcu_read_lock() to make sure the dst and
associated idev are alive.
Fixes: 5796015fa9 ("ipv6: allocate enough headroom in ip6_finish_output2()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b3e33fcc38f7750604b065c55a43e94c5bc3145 ]
GRO code checks for matching layer 2 headers to see, if packet belongs
to the same flow and because ip6 tunnel set dev->hard_header_len
this check fails in cases, where it shouldn't. To fix this don't
set hard_header_len, but use needed_headroom like ipv4/ip_tunnel.c
does.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Link: https://patch.msgid.link/20240815151419.109864-1-tbogendoerfer@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1eeb5043573981f3a1278876515851b7f6b1df1b ]
We lost ability to unload ipv6 module a long time ago.
Instead of calling expensive inet_twsk_purge() twice,
we can handle all families in one round.
Also remove an extra line added in my prior patch,
per Kuniyuki Iwashima feedback.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/20240327192934.6843-1-kuniyu@amazon.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240329153203.345203-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 565d121b6998 ("tcp: prevent concurrent execution of tcp_sk_exit_batch")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cd740b985963f874a1a094f1969e998b9d05554 ]
Commit 264640fc2c ("ipv6: distinguish frag queues by device
for multicast and link-local packets") modified the ipv6 fragment
reassembly logic to distinguish frag queues by device for multicast
and link-local packets but in fact only the main reassembly code
limits the use of the device to those address types and the netfilter
reassembly code uses the device for all packets.
This means that if fragments of a packet arrive on different interfaces
then netfilter will fail to reassemble them and the fragments will be
expired without going any further through the filters.
Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 252442f2ae317d109ef0b4b39ce0608c09563042 upstream.
By default, an address assigned to the output interface is selected when
the source address is not specified. This is problematic when a route,
configured in a vrf, uses an interface from another vrf (aka route leak).
The original vrf does not own the selected source address.
Let's add a check against the output interface and call the appropriate
function to select the source address.
CC: stable@vger.kernel.org
Fixes: 0d240e7811 ("net: vrf: Implement get_saddr for IPv6")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20240710081521.3809742-3-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a46c68debf3be3a477a69ccbf0a1d050df841676 ]
The current logic only works if the PIO is between two
other ND user options. This fixes it so that the PIO
can also be either before or after other ND user options
(for example the first or last option in the RA).
side note: there's actually Android tests verifying
a portion of the old broken behaviour, so:
https://android-review.googlesource.com/c/kernel/tests/+/3196704
fixes those up.
Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Patrick Rohr <prohr@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Fixes: 048c796beb ("ipv6: adjust ndisc_is_useropt() to also return true for PIO")
Link: https://patch.msgid.link/20240730001748.147636-1-maze@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c22921df777de5606f1047b1345b8d22ef1c0b34 ]
ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id],
but the function is exposed to user space before the entry is allocated
via register_pernet_subsys().
Let's call register_pernet_subsys() before xt_register_template().
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit abb9a68d2c64dd9b128ae1f2e635e4d805e7ce64 upstream.
When the source address is selected, the scope must be checked. For
example, if a loopback address is assigned to the vrf device, it must not
be chosen for packets sent outside.
CC: stable@vger.kernel.org
Fixes: afbac6010a ("net: ipv6: Address selection needs to consider L3 domains")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240710081521.3809742-4-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fde6f897f2a184546bf5516ac736523ef24dc6a7 ]
These functions have races when they:
1) Write sk->sk_err
2) call sk_error_report(sk)
3) call tcp_done(sk)
As described in prior patches in this series:
An smp_wmb() is missing.
We should call tcp_done() before sk_error_report(sk)
to have consistent tcp_poll() results on SMP hosts.
Use tcp_done_with_error() where we centralized the
correct sequence.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240528125253.1966136-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96f887a612e4cda89efc3f54bc10c1997e3ab0e9 ]
xmit() functions should consume skb or return error codes in error
paths.
When the configuration "CONFIG_INET_ESPINTCP" is not set, the
implementation of the function "esp_output_tail_tcp" violates this rule.
The function frees the skb and returns the error code.
This change removes the kfree_skb from both functions, for both
esp4 and esp6.
WARN_ON is added because esp_output_tail_tcp() should never be called if
CONFIG_INET_ESPINTCP is not set.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf28ff8e4c02e1ffa850755288ac954b6ff0db8c ]
As explained in commit 1378817486 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
ila_output() is called from lwtunnel_output()
possibly from process context, and under rcu_read_lock().
We might be interrupted by a softirq, re-enter ila_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db0090c6eb12c31246438b7fe2a8f1b833e7a653 ]
As explained in commit 1378817486 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in rpl_output() is not good enough,
because rpl_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter rpl_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Apply a similar change in rpl_input().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14a20e5b4ad998793c5f43b0330d9e1388446cf3 ]
The net.ipv6.route.flush system parameter takes a value which specifies
a delay used during the flush operation for aging exception routes. The
written value is however not used in the currently requested flush and
instead utilized only in the next one.
A problem is that ipv6_sysctl_rtcache_flush() first reads the old value
of net->ipv6.sysctl.flush_delay into a local delay variable and then
calls proc_dointvec() which actually updates the sysctl based on the
provided input.
Fix the problem by switching the order of the two operations.
Fixes: 4990509f19 ("[NETNS][IPV6]: Make sysctls route per namespace.")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607112828.30285-1-petr.pavlu@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d37fe4255abe8e7b419b90c5847e8ec2b8debb08 ]
tcp_v6_syn_recv_sock() calls ip6_dst_store() before
inet_sk(newsk)->pinet6 has been set up.
This means ip6_dst_store() writes over the parent (listener)
np->dst_cookie.
This is racy because multiple threads could share the same
parent and their final np->dst_cookie could be wrong.
Move ip6_dst_store() call after inet_sk(newsk)->pinet6
has been changed and after the copy of parent ipv6_pinfo.
Fixes: e994b2f0fb ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0b98ac1cc104f48763cdb27b1e9ac25fd81fc90 ]
As explained in commit 1378817486 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in seg6_output_core() is not good enough,
because seg6_output_core() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter seg6_output_core()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Apply a similar change in seg6_input_core().
Fixes: fa79581ea6 ("ipv6: sr: fix several BUGs when preemption is enabled")
Fixes: 6c8702c60b ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Lebrun <dlebrun@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fe40483ec257de2a0d819ef88e3e76c7e261319 ]
As explained in commit 1378817486 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.
Disabling preemption in ioam6_output() is not good enough,
because ioam6_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().
We might be interrupted by a softirq, re-enter ioam6_output()
and corrupt dst_cache data structures.
Fix the race by using local_bh_disable() instead of
preempt_disable().
Fixes: 8cb3bf8bff ("ipv6: ioam: Add support for the ip6ip6 encapsulation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Justin Iurman <justin.iurman@uliege.be>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 92f1655aa2b2294d0b49925f3b875a634bd3b59e upstream.
__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.
RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).
Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.
Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.
Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.
Many thanks to Clement Lecigne for tracking this issue.
This old bug became visible after the blamed commit, using UDP sockets.
Fixes: a87cb3e48e ("net: Facility to report route quality of connected sockets")
Reported-by: Clement Lecigne <clecigne@google.com>
Diagnosed-by: Clement Lecigne <clecigne@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Lee: Stable backport]
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb487272380d120295e955ad8acfcbb281b57642 upstream.
Problem
=========
After commit 67f6951347 ("ipv6: Move setting default metric for routes"),
we noticed that the logic of assigning the default value of fc_metirc
changed in the ioctl process. That is, when users use ioctl(fd, SIOCADDRT,
rt) with a non-zero metric to add a route, then they may fail to delete a
route with passing in a metric value of 0 to the kernel by ioctl(fd,
SIOCDELRT, rt). But iproute can succeed in deleting it.
As a reference, when using iproute tools by netlink to delete routes with
a metric parameter equals 0, like the command as follows:
ip -6 route del fe80::/64 via fe81::5054:ff:fe11:3451 dev eth0 metric 0
the user can still succeed in deleting the route entry with the smallest
metric.
Root Reason
===========
After commit 67f6951347 ("ipv6: Move setting default metric for routes"),
When ioctl() pass in SIOCDELRT with a zero metric, rtmsg_to_fib6_config()
will set a defalut value (1024) to cfg->fc_metric in kernel, and in
ip6_route_del() and the line 4074 at net/ipv3/route.c, it will check by
if (cfg->fc_metric && cfg->fc_metric != rt->fib6_metric)
continue;
and the condition is true and skip the later procedure (deleting route)
because cfg->fc_metric != rt->fib6_metric. But before that commit,
cfg->fc_metric is still zero there, so the condition is false and it
will do the following procedure (deleting).
Solution
========
In order to keep a consistent behaviour across netlink() and ioctl(), we
should allow to delete a route with a metric value of 0. So we only do
the default setting of fc_metric in route adding.
CC: stable@vger.kernel.org # 5.4+
Fixes: 67f6951347 ("ipv6: Move setting default metric for routes")
Co-developed-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240514201102055dD2Ba45qKbLlUMxu_DTHP@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efb9f4f19f8e37fde43dfecebc80292d179f56c6 ]
seg6_hmac_init_algo returns without cleaning up the previous allocations
if one fails, so it's going to leak all that memory and the crypto tfms.
Update seg6_hmac_exit to only free the memory when allocated, so we can
reuse the code directly.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Closes: https://lore.kernel.org/netdev/Zj3bh-gE7eT6V6aH@hog/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240517005435.2600277-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5447f9708d9e4c17a647b16a9cb29e9e02820bd9 ]
The seg6_input() function is responsible for adding the SRH into a
packet, delegating the operation to the seg6_input_core(). This function
uses the skb_cow_head() to ensure that there is sufficient headroom in
the sk_buff for accommodating the link-layer header.
In the event that the skb_cow_header() function fails, the
seg6_input_core() catches the error but it does not release the sk_buff,
which will result in a memory leak.
This issue was introduced in commit af3b5158b8 ("ipv6: sr: fix BUG due
to headroom too small after SRH push") and persists even after commit
7a3f5b0de3 ("netfilter: add netfilter hooks to SRv6 data plane"),
where the entire seg6_input() code was refactored to deal with netfilter
hooks.
The proposed patch addresses the identified memory leak by requiring the
seg6_input_core() function to release the sk_buff in the event that
skb_cow_head() fails.
Fixes: af3b5158b8 ("ipv6: sr: fix BUG due to headroom too small after SRH push")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 160e9d2752181fcf18c662e74022d77d3164cd45 ]
The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL
is not defined. In that case if seg6_hmac_init() fails, the
genl_unregister_family() isn't called.
This issue exist since commit 46738b1317 ("ipv6: sr: add option to control
lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible
use-after-free and null-ptr-deref") replaced unregister_pernet_subsys()
with genl_unregister_family() in this error path.
Fixes: 46738b1317 ("ipv6: sr: add option to control lwtunnel support")
Reported-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240509131812.1662197-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e370a771d2985107e82d0f6174381c1acb49c20 ]
Commit 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and
null-ptr-deref") changed the register order in seg6_init(). But the
unregister order in seg6_exit() is not updated.
Fixes: 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and null-ptr-deref")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240509131812.1662197-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3321687e321307629c71b664225b861ebf3e5753 ]
Currently, we only call seg6_local_exit() in seg6_init() if
seg6_local_init() failed. But forgot to call it in seg6_exit().
Fixes: d1df6fd8a1 ("ipv6: sr: define core operations for seg6local lightweight tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240509131812.1662197-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cd354fe1e4864eeaff62f66ee513080ec946f20 ]
In IPv6, ipv6_rcv_core will parse the hop-by-hop type extension header and increase skb->transport_header by one extension header length.
But if there are more other extension headers like fragment header at this time, the skb->transport_header points to the second extension header,
not the transport layer header or the first extension header.
This will result in the start and nexthdrp variable not pointing to the same position in ipv6frag_thdr_trunced,
and ipv6_skip_exthdr returning incorrect offset and frag_off.Sometimes,the length of the last sharded packet is smaller than the calculated incorrect offset, resulting in packet loss.
We can use network header to offset and calculate the correct position to solve this problem.
Fixes: 9d9e937b1c (ipv6/netfilter: Discard first fragment not including all headers)
Signed-off-by: Gao Xingwang <gaoxingwang1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50aee97d15113b95a68848db1f0cb2a6c09f753a ]
We've observed a 7-12% performance regression in iperf3 UDP ipv4 and
ipv6 tests with multiple sockets on Zen3 cpus, which we traced back to
commit f0ea27e7bf ("udp: re-score reuseport groups when connected
sockets are present"). The failing tests were those that would spawn
UDP sockets per-cpu on systems that have a high number of cpus.
Unsurprisingly, it is not caused by the extra re-scoring of the reused
socket, but due to the compiler no longer inlining compute_score, once
it has the extra call site in udp4_lib_lookup2. This is augmented by
the "Safe RET" mitigation for SRSO, needed in our Zen3 cpus.
We could just explicitly inline it, but compute_score() is quite a large
function, around 300b. Inlining in two sites would almost double
udp4_lib_lookup2, which is a silly thing to do just to workaround a
mitigation. Instead, this patch shuffles the code a bit to avoid the
multiple calls to compute_score. Since it is a static function used in
one spot, the compiler can safely fold it in, as it did before, without
increasing the text size.
With this patch applied I ran my original iperf3 testcases. The failing
cases all looked like this (ipv4):
iperf3 -c 127.0.0.1 --udp -4 -f K -b $R -l 8920 -t 30 -i 5 -P 64 -O 2
where $R is either 1G/10G/0 (max, unlimited). I ran 3 times each.
baseline is v6.9-rc3. harmean == harmonic mean; CV == coefficient of
variation.
ipv4:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 1743852.66(0.0208) 1725933.02(0.0167) 1705203.78(0.0386)
patched 1968727.61(0.0035) 1962283.22(0.0195) 1923853.50(0.0256)
ipv6:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 1729020.03(0.0028) 1691704.49(0.0243) 1692251.34(0.0083)
patched 1900422.19(0.0067) 1900968.01(0.0067) 1568532.72(0.1519)
This restores the performance we had before the change above with this
benchmark. We obviously don't expect any real impact when mitigations
are disabled, but just to be sure it also doesn't regresses:
mitigations=off ipv4:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 3230279.97(0.0066) 3229320.91(0.0060) 2605693.19(0.0697)
patched 3242802.36(0.0073) 3239310.71(0.0035) 2502427.19(0.0882)
Cc: Lorenz Bauer <lmb@isovalent.com>
Fixes: f0ea27e7bf ("udp: re-score reuseport groups when connected sockets are present")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni