commit 4a622e4d477bb12ad5ed4abbc7ad1365de1fa347 upstream.
The original implementation ext4's FS_IOC_GETFSMAP handling only
worked when the range of queried blocks included at least one free
(unallocated) block range. This is because how the metadata blocks
were emitted was as a side effect of ext4_mballoc_query_range()
calling ext4_getfsmap_datadev_helper(), and that function was only
called when a free block range was identified. As a result, this
caused generic/365 to fail.
Fix this by creating a new function ext4_getfsmap_meta_helper() which
gets called so that blocks before the first free block range in a
block group can get properly reported.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 902cc179c931a033cd7f4242353aa2733bf8524c upstream.
find_group_other() and find_group_orlov() read *_lo, *_hi with
ext4_free_inodes_count without additional locking. This can cause
data-race warning, but since the lock is held for most writes and free
inodes value is generally not a problem even if it is incorrect, it is
more appropriate to use READ_ONCE()/WRITE_ONCE() than to add locking.
==================================================================
BUG: KCSAN: data-race in ext4_free_inodes_count / ext4_free_inodes_set
write to 0xffff88810404300e of 2 bytes by task 6254 on cpu 1:
ext4_free_inodes_set+0x1f/0x80 fs/ext4/super.c:405
__ext4_new_inode+0x15ca/0x2200 fs/ext4/ialloc.c:1216
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff88810404300e of 2 bytes by task 6257 on cpu 0:
ext4_free_inodes_count+0x1c/0x80 fs/ext4/super.c:349
find_group_other fs/ext4/ialloc.c:594 [inline]
__ext4_new_inode+0x6ec/0x2200 fs/ext4/ialloc.c:1017
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20241003125337.47283-1-aha310510@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f3d93e210b9c2866c8b3662adae427d5bf511ec ]
When I enabled ext4 debug for fault injection testing, I encountered the
following warning:
EXT4-fs error (device sda): ext4_read_inode_bitmap:201: comm fsstress:
Cannot read inode bitmap - block_group = 8, inode_bitmap = 1051
WARNING: CPU: 0 PID: 511 at fs/buffer.c:1181 mark_buffer_dirty+0x1b3/0x1d0
The root cause of the issue lies in the improper implementation of ext4's
buffer_head read fault injection. The actual completion of buffer_head
read and the buffer_head fault injection are not atomic, which can lead
to the uptodate flag being cleared on normally used buffer_heads in race
conditions.
[CPU0] [CPU1] [CPU2]
ext4_read_inode_bitmap
ext4_read_bh()
<bh read complete>
ext4_read_inode_bitmap
if (buffer_uptodate(bh))
return bh
jbd2_journal_commit_transaction
__jbd2_journal_refile_buffer
__jbd2_journal_unfile_buffer
__jbd2_journal_temp_unlink_buffer
ext4_simulate_fail_bh()
clear_buffer_uptodate
mark_buffer_dirty
<report warning>
WARN_ON_ONCE(!buffer_uptodate(bh))
The best approach would be to perform fault injection in the IO completion
callback function, rather than after IO completion. However, the IO
completion callback function cannot get the fault injection code in sb.
Fix it by passing the result of fault injection into the bh read function,
we simulate faults within the bh read function itself. This requires adding
an extra parameter to the bh read functions that need fault injection.
Fixes: 46f870d690 ("ext4: simulate various I/O and checksum errors when reading metadata")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Link: https://patch.msgid.link/20240906091746.510163-1-leo.lilong@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a40759fb16ae839f8c769174fde017564ea564ff ]
Iterate the folio's list of buffer_heads twice instead of keeping
an array of pointers. This solves a too-large-array-for-stack problem
on architectures with a ridiculoously large PAGE_SIZE and prepares
ext4 to support larger folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20240718223005.568869-3-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 2f3d93e210b9 ("ext4: fix race in buffer_head read fault injection")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 368a83cebbb949adbcc20877c35367178497d9cc ]
Instead of synchronously reading one buffer at a time, submit reads
as we walk the buffers in the first loop, then wait for them in the
second loop. This should be significantly more efficient, particularly
on HDDs, but I have not measured.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20240718223005.568869-2-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 2f3d93e210b9 ("ext4: fix race in buffer_head read fault injection")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76486b104168ae59703190566e372badf433314b ]
When we remount filesystem with 'abort' mount option while changing
other mount options as well (as is LTP test doing), we can return error
from the system call after commit d3476f3dad4a ("ext4: don't set
SB_RDONLY after filesystem errors") because the application of mount
option changes detects shutdown filesystem and refuses to do anything.
The behavior of application of other mount options in presence of
'abort' mount option is currently rather arbitary as some mount option
changes are handled before 'abort' and some after it.
Move aborting of the filesystem to the end of remount handling so all
requested changes are properly applied before the filesystem is shutdown
to have a reasonably consistent behavior.
Fixes: d3476f3dad4a ("ext4: don't set SB_RDONLY after filesystem errors")
Reported-by: Jan Stancek <jstancek@redhat.com>
Link: https://lore.kernel.org/all/Zvp6L+oFnfASaoHl@t14s
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Jan Stancek <jstancek@redhat.com>
Link: https://patch.msgid.link/20241004221556.19222-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3476f3dad4ad68ae5f6b008ea6591d1520da5d8 ]
When the filesystem is mounted with errors=remount-ro, we were setting
SB_RDONLY flag to stop all filesystem modifications. We knew this misses
proper locking (sb->s_umount) and does not go through proper filesystem
remount procedure but it has been the way this worked since early ext2
days and it was good enough for catastrophic situation damage
mitigation. Recently, syzbot has found a way (see link) to trigger
warnings in filesystem freezing because the code got confused by
SB_RDONLY changing under its hands. Since these days we set
EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all
filesystem modifications, modifying SB_RDONLY shouldn't be needed. So
stop doing that.
Link: https://lore.kernel.org/all/000000000000b90a8e061e21d12f@google.com
Reported-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://patch.msgid.link/20240805201241.27286-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 04e6ce8f06d161399e5afde3df5dcfa9455b4952 upstream.
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch moves the call to this function so that an handle
can be used. If a transaction fails to start, then there's not point in
trying to mark the filesystem as ineligible, and an error will eventually be
returned to user-space.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240923104909.18342-3-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faab35a0370fd6e0821c7a8dd213492946fc776f upstream.
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch fixes the calls to this function in
__track_dentry_update() by adding an extra parameter to the callback used in
ext4_fc_track_template().
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240923104909.18342-2-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6db3c1575a750fd417a70e0178bdf6efa0dd5037 upstream.
When a full journal commit is on-going, any fast commit has to be enqueued
into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing
is done only once, i.e. if an inode is already queued in a previous fast
commit entry it won't be enqueued again. However, if a full commit starts
_after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to
be done into FC_Q_STAGING. And this is not being done in function
ext4_fc_track_template().
This patch fixes the issue by re-enqueuing an inode into the STAGING queue
during the fast commit clean-up callback when doing a full commit. However,
to prevent a race with a fast-commit, the clean-up callback has to be called
with the journal locked.
This bug was found using fstest generic/047. This test creates several 32k
bytes files, sync'ing each of them after it's creation, and then shutting
down the filesystem. Some data may be loss in this operation; for example a
file may have it's size truncated to zero.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240717172220.14201-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd589b0f1445e1ea1085b98edca6e4d5dedb98d0 upstream.
Function ext4_wait_for_tail_page_commit() assumes that '0' is not a valid
value for transaction IDs, which is incorrect. Don't assume that and invoke
jbd2_log_wait_commit() if the journal had a committing transaction instead.
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240724161119.13448-2-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b4b2dcace35f618fe361a87bae6f0d13af31bc1 upstream.
In ext4_find_extent(), if the path is not big enough, we free it and set
*orig_path to NULL. But after reallocating and successfully initializing
the path, we don't update *orig_path, in which case the caller gets a
valid path but a NULL ppath, and this may cause a NULL pointer dereference
or a path memory leak. For example:
ext4_split_extent
path = *ppath = 2000
ext4_find_extent
if (depth > path[0].p_maxdepth)
kfree(path = 2000);
*orig_path = path = NULL;
path = kcalloc() = 3000
ext4_split_extent_at(*ppath = NULL)
path = *ppath;
ex = path[depth].p_ext;
// NULL pointer dereference!
==================================================================
BUG: kernel NULL pointer dereference, address: 0000000000000010
CPU: 6 UID: 0 PID: 576 Comm: fsstress Not tainted 6.11.0-rc2-dirty #847
RIP: 0010:ext4_split_extent_at+0x6d/0x560
Call Trace:
<TASK>
ext4_split_extent.isra.0+0xcb/0x1b0
ext4_ext_convert_to_initialized+0x168/0x6c0
ext4_ext_handle_unwritten_extents+0x325/0x4d0
ext4_ext_map_blocks+0x520/0xdb0
ext4_map_blocks+0x2b0/0x690
ext4_iomap_begin+0x20e/0x2c0
[...]
==================================================================
Therefore, *orig_path is updated when the extent lookup succeeds, so that
the caller can safely use path or *ppath.
Fixes: 10809df84a ("ext4: teach ext4_ext_find_extent() to realloc path if necessary")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240822023545.1994557-6-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ce160c5bdb67081a62293028dc85758a8efb22a upstream.
Syzbot has found an ODEBUG bug in ext4_fill_super
The del_timer_sync function cancels the s_err_report timer,
which reminds about filesystem errors daily. We should
guarantee the timer is no longer active before kfree(sbi).
When filesystem mounting fails, the flow goes to failed_mount3,
where an error occurs when ext4_stop_mmpd is called, causing
a read I/O failure. This triggers the ext4_handle_error function
that ultimately re-arms the timer,
leaving the s_err_report timer active before kfree(sbi) is called.
Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd.
Signed-off-by: Xiaxi Shen <shenxiaxi26@gmail.com>
Reported-and-tested-by: syzbot+59e0101c430934bc9a36@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=59e0101c430934bc9a36
Link: https://patch.msgid.link/20240715043336.98097-1-shenxiaxi26@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcaa6c31134c0f515600111c38ed7750003e1b9c upstream.
In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been
released, otherwise it may be released twice. An example of what triggers
this is as follows:
split2 map split1
|--------|-------|--------|
ext4_ext_map_blocks
ext4_ext_handle_unwritten_extents
ext4_split_convert_extents
// path->p_depth == 0
ext4_split_extent
// 1. do split1
ext4_split_extent_at
|ext4_ext_insert_extent
| ext4_ext_create_new_leaf
| ext4_ext_grow_indepth
| le16_add_cpu(&neh->eh_depth, 1)
| ext4_find_extent
| // return -ENOMEM
|// get error and try zeroout
|path = ext4_find_extent
| path->p_depth = 1
|ext4_ext_try_to_merge
| ext4_ext_try_to_merge_up
| path->p_depth = 0
| brelse(path[1].p_bh) ---> not set to NULL here
|// zeroout success
// 2. update path
ext4_find_extent
// 3. do split2
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
le16_add_cpu(&neh->eh_depth, 1)
ext4_find_extent
path[0].p_bh = NULL;
path->p_depth = 1
read_extent_tree_block ---> return err
// path[1].p_bh is still the old value
ext4_free_ext_path
ext4_ext_drop_refs
// path->p_depth == 1
brelse(path[1].p_bh) ---> brelse a buffer twice
Finally got the following WARRNING when removing the buffer from lru:
============================================
VFS: brelse: Trying to free free buffer
WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90
CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716
RIP: 0010:__brelse+0x58/0x90
Call Trace:
<TASK>
__find_get_block+0x6e7/0x810
bdev_getblk+0x2b/0x480
__ext4_get_inode_loc+0x48a/0x1240
ext4_get_inode_loc+0xb2/0x150
ext4_reserve_inode_write+0xb7/0x230
__ext4_mark_inode_dirty+0x144/0x6a0
ext4_ext_insert_extent+0x9c8/0x3230
ext4_ext_map_blocks+0xf45/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
============================================
Fixes: ecb94f5fdf ("ext4: collapse a single extent tree block into the inode if possible")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-9-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c0f4cc84d3a601c99bc5e6e6eb1cbda542cce95 upstream.
When calling ext4_force_split_extent_at() in ext4_ext_replay_update_ex(),
the 'ppath' is updated but it is the 'path' that is freed, thus potentially
triggering a double-free in the following process:
ext4_ext_replay_update_ex
ppath = path
ext4_force_split_extent_at(&ppath)
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
ext4_find_extent
if (depth > path[0].p_maxdepth)
kfree(path) ---> path First freed
*orig_path = path = NULL ---> null ppath
kfree(path) ---> path double-free !!!
So drop the unnecessary ppath and use path directly to avoid this problem.
And use ext4_find_extent() directly to update path, avoiding unnecessary
memory allocation and freeing. Also, propagate the error returned by
ext4_find_extent() instead of using strange error codes.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-8-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dda898d7ffe85931f9cca6d702a51f33717c501e upstream.
The dax_iomap_rw() does two things in each iteration: map written blocks
and copy user data to blocks. If the process is killed by user(See signal
handling in dax_iomap_iter()), the copied data will be returned and added
on inode size, which means that the length of written extents may exceed
the inode size, then fsck will fail. An example is given as:
dd if=/dev/urandom of=file bs=4M count=1
dax_iomap_rw
iomap_iter // round 1
ext4_iomap_begin
ext4_iomap_alloc // allocate 0~2M extents(written flag)
dax_iomap_iter // copy 2M data
iomap_iter // round 2
iomap_iter_advance
iter->pos += iter->processed // iter->pos = 2M
ext4_iomap_begin
ext4_iomap_alloc // allocate 2~4M extents(written flag)
dax_iomap_iter
fatal_signal_pending
done = iter->pos - iocb->ki_pos // done = 2M
ext4_handle_inode_extension
ext4_update_inode_size // inode size = 2M
fsck reports: Inode 13, i_size is 2097152, should be 4194304. Fix?
Fix the problem by truncating extents if the written length is smaller
than expected.
Fixes: 776722e85d ("ext4: DAX iomap write support")
CC: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219136
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://patch.msgid.link/20240809121532.2105494-1-chengzhihao@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebc4b2c1ac92fc0f8bf3f5a9c285a871d5084a6b upstream.
Function jbd2_journal_shrink_checkpoint_list() assumes that '0' is not a
valid value for transaction IDs, which is incorrect.
Furthermore, the sbi->s_fc_ineligible_tid handling also makes the same
assumption by being initialised to '0'. Fortunately, the sb flag
EXT4_MF_FC_INELIGIBLE can be used to check whether sbi->s_fc_ineligible_tid
has been previously set instead of comparing it with '0'.
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240724161119.13448-5-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 369c944ed1d7c3fb7b35f24e4735761153afe7b3 upstream.
Even though ext4_find_extent() returns an error, ext4_insert_range() still
returns 0. This may confuse the user as to why fallocate returns success,
but the contents of the file are not as expected. So propagate the error
returned by ext4_find_extent() to avoid inconsistencies.
Fixes: 331573febb ("ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-11-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c26ab35702f8cd0cdc78f96aa5856bfb77be798f upstream.
We hit the following use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0
Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40
CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724
Call Trace:
<TASK>
kasan_report+0x93/0xc0
ext4_split_extent_at+0xba8/0xcc0
ext4_split_extent.isra.0+0x18f/0x500
ext4_split_convert_extents+0x275/0x750
ext4_ext_handle_unwritten_extents+0x73e/0x1580
ext4_ext_map_blocks+0xe20/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
Allocated by task 40:
__kmalloc_noprof+0x1ac/0x480
ext4_find_extent+0xf3b/0x1e70
ext4_ext_map_blocks+0x188/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
Freed by task 40:
kfree+0xf1/0x2b0
ext4_find_extent+0xa71/0x1e70
ext4_ext_insert_extent+0xa22/0x3260
ext4_split_extent_at+0x3ef/0xcc0
ext4_split_extent.isra.0+0x18f/0x500
ext4_split_convert_extents+0x275/0x750
ext4_ext_handle_unwritten_extents+0x73e/0x1580
ext4_ext_map_blocks+0xe20/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
==================================================================
The flow of issue triggering is as follows:
ext4_split_extent_at
path = *ppath
ext4_ext_insert_extent(ppath)
ext4_ext_create_new_leaf(ppath)
ext4_find_extent(orig_path)
path = *orig_path
read_extent_tree_block
// return -ENOMEM or -EIO
ext4_free_ext_path(path)
kfree(path)
*orig_path = NULL
a. If err is -ENOMEM:
ext4_ext_dirty(path + path->p_depth)
// path use-after-free !!!
b. If err is -EIO and we have EXT_DEBUG defined:
ext4_ext_show_leaf(path)
eh = path[depth].p_hdr
// path also use-after-free !!!
So when trying to zeroout or fix the extent length, call ext4_find_extent()
to update the path.
In addition we use *ppath directly as an ext4_ext_show_leaf() input to
avoid possible use-after-free when EXT_DEBUG is defined, and to avoid
unnecessary path updates.
Fixes: dfe5080939 ("ext4: drop EXT4_EX_NOFREE_ON_ERR from rest of extents handling code")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-4-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70dd7b573afeba9b8f8a33f2ae1e4a9a2ec8c1ec upstream.
EXT4_DIRENT_HASH and EXT4_DIRENT_MINOR_HASH will access struct
ext4_dir_entry_hash followed ext4_dir_entry. But there is no ext4_dir_entry_hash
followed when inode is encrypted and not casefolded
Signed-off-by: yao.ly <yao.ly@linux.alibaba.com>
Link: https://patch.msgid.link/1719816219-128287-1-git-send-email-yao.ly@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc749e61c011c255d81b192a822db650c68b313f ]
Fuzzing reports a possible deadlock in jbd2_log_wait_commit.
This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require
synchronous updates because the file descriptor is opened with O_SYNC.
This can lead to the jbd2_journal_stop() function calling
jbd2_might_wait_for_commit(), potentially causing a deadlock if the
EXT4_IOC_MIGRATE call races with a write(2) system call.
This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this
case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the
jbd2_journal_stop function while i_data_sem is locked. This triggers
lockdep because the jbd2_journal_start function might also lock the same
jbd2_handle simultaneously.
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Co-developed-by: Mikhail Ukhin <mish.uxin2012@yandex.ru>
Signed-off-by: Mikhail Ukhin <mish.uxin2012@yandex.ru>
Signed-off-by: Artem Sadovnikov <ancowi69@gmail.com>
Rule: add
Link: https://lore.kernel.org/stable/20240404095000.5872-1-mish.uxin2012%40yandex.ru
Link: https://patch.msgid.link/20240829152210.2754-1-ancowi69@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e2524ba2ca5f54bdbb9e5153bea00421ef653f5 ]
In ext4_find_extent(), path may be freed by error or be reallocated, so
using a previously saved *ppath may have been freed and thus may trigger
use-after-free, as follows:
ext4_split_extent
path = *ppath;
ext4_split_extent_at(ppath)
path = ext4_find_extent(ppath)
ext4_split_extent_at(ppath)
// ext4_find_extent fails to free path
// but zeroout succeeds
ext4_ext_show_leaf(inode, path)
eh = path[depth].p_hdr
// path use-after-free !!!
Similar to ext4_split_extent_at(), we use *ppath directly as an input to
ext4_ext_show_leaf(). Fix a spelling error by the way.
Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only
used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly.
This issue is triggered only when EXT_DEBUG is defined and therefore does
not affect functionality.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-5-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd69f8f9de280e331c9e6ff689ced0a688a9ce8f ]
ext4_search_dir currently returns -1 in case of a failure, while it returns
0 when the name is not found. In such failure cases, it should return an
error code instead.
This becomes even more important when ext4_find_inline_entry returns an
error code as well in the next commit.
-EFSCORRUPTED seems appropriate as such error code as these failures would
be caused by unexpected record lengths and is in line with other instances
of ext4_check_dir_entry failures.
In the case of ext4_dx_find_entry, the current use of ERR_BAD_DX_DIR was
left as is to reduce the risk of regressions.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20240821152324.3621860-2-cascardo@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee85e0938aa8f9846d21e4d302c3cf6a2a75110d ]
We disable stripe size in __ext4_fill_super if it is not a multiple of
the cluster ratio however this check is missed when trying to remount.
This can leave us with cases where stripe < cluster_ratio after
remount:set making EXT4_B2C(sbi->s_stripe) become 0 that can cause some
unforeseen bugs like divide by 0.
Fix that by adding the check in remount path as well.
Reported-by: syzbot+1ad8bac5af24d01e2cbd@syzkaller.appspotmail.com
Tested-by: syzbot+1ad8bac5af24d01e2cbd@syzkaller.appspotmail.com
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Fixes: c3defd99d5 ("ext4: treat stripe in block unit")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/3a493bb503c3598e25dcfbed2936bb2dff3fece7.1725002410.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d231b91a944f3cab355fce65af5871fb5d7735b ]
In case of errors when reading an inode from disk or traversing inline
directory entries, return an error-encoded ERR_PTR instead of returning
NULL. ext4_find_inline_entry only caller, __ext4_find_entry already returns
such encoded errors.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20240821152324.3621860-3-cascardo@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: c6b72f5d82b1 ("ext4: avoid OOB when system.data xattr changes underneath the filesystem")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0a12c3439b10d88412fd3102df5b9a6e3cd6dc ]
min_clusters is signed integer and will be converted to unsigned
integer when compared with unsigned number stats.free_clusters.
If min_clusters is negative, it will be converted to a huge unsigned
value in which case all groups may not meet the actual desired free
clusters.
Set negative min_clusters to 0 to avoid unexpected behavior.
Fixes: ac27a0ec11 ("[PATCH] ext4: initial copy of files from ext3")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://patch.msgid.link/20240820132234.2759926-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 227d31b9214d1b9513383cf6c7180628d4b3b61f ]
If a group is marked EXT4_GROUP_INFO_IBITMAP_CORRUPT after it's inode
bitmap buffer_head was successfully verified, then __ext4_new_inode()
will get a valid inode_bitmap_bh of a corrupted group from
ext4_read_inode_bitmap() in which case inode_bitmap_bh misses a release.
Hnadle "IS_ERR(inode_bitmap_bh)" and group corruption separately like
how ext4_free_inode() does to avoid buffer_head leak.
Fixes: 9008a58e5d ("ext4: make the bitmap read routines return real error codes")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://patch.msgid.link/20240820132234.2759926-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e5b2a56c57def1b41efd49596621504d7bcc61c ]
Release inode_bitmap_bh from ext4_read_inode_bitmap() in
ext4_mark_inode_used() to avoid buffer_head leak.
By the way, remove unneeded goto for invalid ino when inode_bitmap_bh
is NULL.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://patch.msgid.link/20240820132234.2759926-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20cee68f5b44fdc2942d20f3172a262ec247b117 ]
Commit 3d56b8d2c7 ("ext4: Speed up FITRIM by recording flags in
ext4_group_info") speed up fstrim by skipping trim trimmed group. We
also has the chance to clear trimmed once there exists some block free
for this group(mount without discard), and the next trim for this group
will work well too.
For mount with discard, we will issue dicard when we free blocks, so
leave trimmed flag keep alive to skip useless trim trigger from
userspace seems reasonable. But for some case like ext4 build on
dm-thinpool(ext4 blocksize 4K, pool blocksize 128K), discard from ext4
maybe unaligned for dm thinpool, and thinpool will just finish this
discard(see process_discard_bio when begein equals to end) without
actually process discard. For this case, trim from userspace can really
help us to free some thinpool block.
So convert to clear trimmed flag for all case no matter mounted with
discard or not.
Fixes: 3d56b8d2c7 ("ext4: Speed up FITRIM by recording flags in ext4_group_info")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240817085510.2084444-1-yangerkun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63469662cc45d41705f14b4648481d5d29cf5999 ]
In the fast commit code there are a few places where tid_t variables are
being compared without taking into account the fact that these sequence
numbers may wrap. Fix this issue by using the helper functions tid_gt()
and tid_geq().
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://patch.msgid.link/20240529092030.9557-3-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 261341a932d9244cbcd372a3659428c8723e5a49 ]
The max_zeroout is of type int and the s_extent_max_zeroout_kb is of
type uint, and the s_extent_max_zeroout_kb can be freely modified via
the sysfs interface. When the block size is 1024, max_zeroout may
overflow, so declare it as unsigned int to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240319113325.3110393-9-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 172202152a125955367393956acf5f4ffd092e0d ]
Otherwise operating on an incorrupted block bitmap can lead to all sorts
of unknown problems.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d5cdd757d0c74924b629559fccb68d8803ce995 ]
There's nothing page-specific happening in ext4_da_do_write_end();
it's merely used for its refcount & lock, both of which are folio
properties. Saves four calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231214053035.1018876-1-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 83f4414b8f84 ("ext4: sanity check for NULL pointer after ext4_force_shutdown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a46ef234756dca04623b7591e8ebb3440622f0b ]
ext4_xattr_set_entry() creates new EA inodes while holding buffer lock
on the external xattr block. This is problematic as it nests all the
allocation locking (which acquires locks on other buffers) under the
buffer lock. This can even deadlock when the filesystem is corrupted and
e.g. quota file is setup to contain xattr block as data block. Move the
allocation of EA inode out of ext4_xattr_set_entry() into the callers.
Reported-by: syzbot+a43d4f48b8397d0e41a9@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240321162657.27420-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8208c41c43ad5e9b63dce6c45a73e326109ca658 ]
When allocating EA inode, quota accounting is done just before
ext4_xattr_inode_lookup_create(). Logically these two operations belong
together so just fold quota accounting into
ext4_xattr_inode_lookup_create(). We also make
ext4_xattr_inode_lookup_create() return the looked up / created inode to
convert the function to a more standard calling convention.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240209112107.10585-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0a46ef234756 ("ext4: do not create EA inode under buffer lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dc9c3da79c84b13fdb135e2fb0a149a8175bffe ]
Syzbot has found an uninit-value bug in ext4_inlinedir_to_tree
This error happens because ext4_inlinedir_to_tree does not
handle the case when ext4fs_dirhash returns an error
This can be avoided by checking the return value of ext4fs_dirhash
and propagating the error,
similar to how it's done with ext4_htree_store_dirent
Signed-off-by: Xiaxi Shen <shenxiaxi26@gmail.com>
Reported-and-tested-by: syzbot+eaba5abe296837a640c0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=eaba5abe296837a640c0
Link: https://patch.msgid.link/20240501033017.220000-1-shenxiaxi26@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ea6560abb3bac1ffcfa4bf6b2c4d344fdc27b3c ]
ext4_da_map_blocks looks up for any extent entry in the extent status
tree (w/o i_data_sem) and then the looks up for any ondisk extent
mapping (with i_data_sem in read mode).
If it finds a hole in the extent status tree or if it couldn't find any
entry at all, it then takes the i_data_sem in write mode to add a da
entry into the extent status tree. This can actually race with page
mkwrite & fallocate path.
Note that this is ok between
1. ext4 buffered-write path v/s ext4_page_mkwrite(), because of the
folio lock
2. ext4 buffered write path v/s ext4 fallocate because of the inode
lock.
But this can race between ext4_page_mkwrite() & ext4 fallocate path
ext4_page_mkwrite() ext4_fallocate()
block_page_mkwrite()
ext4_da_map_blocks()
//find hole in extent status tree
ext4_alloc_file_blocks()
ext4_map_blocks()
//allocate block and unwritten extent
ext4_insert_delayed_block()
ext4_da_reserve_space()
//reserve one more block
ext4_es_insert_delayed_block()
//drop unwritten extent and add delayed extent by mistake
Then, the delalloc extent is wrong until writeback and the extra
reserved block can't be released any more and it triggers below warning:
EXT4-fs (pmem2): Inode 13 (00000000bbbd4d23): i_reserved_data_blocks(1) not cleared!
Fix the problem by looking up extent status tree again while the
i_data_sem is held in write mode. If it still can't find any entry, then
we insert a new da entry into the extent status tree.
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e4e5cdf2fdeb99445a468b6b6436ad79b9ecb30 ]
Factor out a new common helper ext4_map_query_blocks() from the
ext4_da_map_blocks(), it query and return the extent map status on the
inode's extent path, no logic changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20240517124005.347221-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb3b ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acf795dc161f3cf481db20f05db4250714e375e5 ]
ext4_da_map_blocks() only hold i_data_sem in shared mode and i_rwsem
when inserting delalloc extents, it could be raced by another querying
path of ext4_map_blocks() without i_rwsem, .e.g buffered read path.
Suppose we buffered read a file containing just a hole, and without any
cached extents tree, then it is raced by another delayed buffered write
to the same area or the near area belongs to the same hole, and the new
delalloc extent could be overwritten to a hole extent.
pread() pwrite()
filemap_read_folio()
ext4_mpage_readpages()
ext4_map_blocks()
down_read(i_data_sem)
ext4_ext_determine_hole()
//find hole
ext4_ext_put_gap_in_cache()
ext4_es_find_extent_range()
//no delalloc extent
ext4_da_map_blocks()
down_read(i_data_sem)
ext4_insert_delayed_block()
//insert delalloc extent
ext4_es_insert_extent()
//overwrite delalloc extent to hole
This race could lead to inconsistent delalloc extents tree and
incorrect reserved space counter. Fix this by converting to hold
i_data_sem in exclusive mode when adding a new delalloc extent in
ext4_da_map_blocks().
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb3b ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fcc2b887a1ba4c1f45319cd8c54daa263ecbc36 ]
Refactor and cleanup ext4_da_map_blocks(), reduce some unnecessary
parameters and branches, no logic changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb3b ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f9ca51596bbfd0f9c386dd1c613c394c78d9e5e6 upstream.
The syzbot constructs a directory that has no dirblock but is non-inline,
i.e. the first directory block is a hole. And no errors are reported when
creating files in this directory in the following flow.
ext4_mknod
...
ext4_add_entry
// Read block 0
ext4_read_dirblock(dir, block, DIRENT)
bh = ext4_bread(NULL, inode, block, 0)
if (!bh && (type == INDEX || type == DIRENT_HTREE))
// The first directory block is a hole
// But type == DIRENT, so no error is reported.
After that, we get a directory block without '.' and '..' but with a valid
dentry. This may cause some code that relies on dot or dotdot (such as
make_indexed_dir()) to crash.
Therefore when ext4_read_dirblock() finds that the first directory block
is a hole report that the filesystem is corrupted and return an error to
avoid loading corrupted data from disk causing something bad.
Reported-by: syzbot+ae688d469e36fb5138d0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ae688d469e36fb5138d0
Fixes: 4e19d6b65f ("ext4: allow directory holes")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240702132349.2600605-3-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50ea741def587a64e08879ce6c6a30131f7111e7 upstream.
Syzbot reports a issue as follows:
============================================
BUG: unable to handle page fault for address: ffffed11022e24fe
PGD 23ffee067 P4D 23ffee067 PUD 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 5079 Comm: syz-executor306 Not tainted 6.10.0-rc5-g55027e689933 #0
Call Trace:
<TASK>
make_indexed_dir+0xdaf/0x13c0 fs/ext4/namei.c:2341
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2451
ext4_rename fs/ext4/namei.c:3936 [inline]
ext4_rename2+0x26e5/0x4370 fs/ext4/namei.c:4214
[...]
============================================
The immediate cause of this problem is that there is only one valid dentry
for the block to be split during do_split, so split==0 results in out of
bounds accesses to the map triggering the issue.
do_split
unsigned split
dx_make_map
count = 1
split = count/2 = 0;
continued = hash2 == map[split - 1].hash;
---> map[4294967295]
The maximum length of a filename is 255 and the minimum block size is 1024,
so it is always guaranteed that the number of entries is greater than or
equal to 2 when do_split() is called.
But syzbot's crafted image has no dot and dotdot in dir, and the dentry
distribution in dirblock is as follows:
bus dentry1 hole dentry2 free
|xx--|xx-------------|...............|xx-------------|...............|
0 12 (8+248)=256 268 256 524 (8+256)=264 788 236 1024
So when renaming dentry1 increases its name_len length by 1, neither hole
nor free is sufficient to hold the new dentry, and make_indexed_dir() is
called.
In make_indexed_dir() it is assumed that the first two entries of the
dirblock must be dot and dotdot, so bus and dentry1 are left in dx_root
because they are treated as dot and dotdot, and only dentry2 is moved
to the new leaf block. That's why count is equal to 1.
Therefore add the ext4_check_dx_root() helper function to add more sanity
checks to dot and dotdot before starting the conversion to avoid the above
issue.
Reported-by: syzbot+ae688d469e36fb5138d0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ae688d469e36fb5138d0
Fixes: ac27a0ec11 ("[PATCH] ext4: initial copy of files from ext3")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240702132349.2600605-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65121eff3e4c8c90f8126debf3c369228691c591 ]
If the extended attribute size is not a multiple of block size, the last
block in the EA inode will have uninitialized tail which will get
written to disk. We will never expose the data to userspace but still
this is not a good practice so just zero out the tail of the block as it
isn't going to cause a noticeable performance overhead.
Fixes: e50e5129f3 ("ext4: xattr-in-inode support")
Reported-by: syzbot+9c1fe13fcb51574b249b@syzkaller.appspotmail.com
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240613150234.25176-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7882b0187bbeb647967a7b5998ce4ad26ef68a9a ]
When fast-commit needs to track ranges, it has to handle inodes that have
inlined data in a different way because ext4_fc_write_inode_data(), in the
actual commit path, will attempt to map the required blocks for the range.
However, inodes that have inlined data will have it's data stored in
inode->i_block and, eventually, in the extended attribute space.
Unfortunately, because fast commit doesn't currently support extended
attributes, the solution is to mark this commit as ineligible.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1039883
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Tested-by: Ben Hutchings <benh@debian.org>
Fixes: 9725958bb7 ("ext4: fast commit may miss tracking unwritten range during ftruncate")
Link: https://patch.msgid.link/20240618144312.17786-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Theodore Ts'o