Commit Graph

21 Commits

Author SHA1 Message Date
Gleb Natapov 88ba63c265 KVM: Replace pic_lock()/pic_unlock() with direct call to spinlock functions
They are not doing anything else now.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:22 +03:00
Gleb Natapov 938396a234 KVM: Call ack notifiers from PIC when guest OS acks an IRQ.
Currently they are called when irq vector is been delivered.  Calling ack
notifiers at this point is wrong.  Device assignment ack notifier enables
host interrupts, but guest not yet had a chance to clear interrupt
condition in a device.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:22 +03:00
Gleb Natapov 956f97cf66 KVM: Call kvm_vcpu_kick() inside pic spinlock
d5ecfdd25 moved it out because back than it was impossible to
call it inside spinlock. This restriction no longer exists.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:21 +03:00
Gregory Haskins 090b7aff27 KVM: make io_bus interface more robust
Today kvm_io_bus_regsiter_dev() returns void and will internally BUG_ON
if it fails.  We want to create dynamic MMIO/PIO entries driven from
userspace later in the series, so we need to enhance the code to be more
robust with the following changes:

   1) Add a return value to the registration function
   2) Fix up all the callsites to check the return code, handle any
      failures, and percolate the error up to the caller.
   3) Add an unregister function that collapses holes in the array

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:12 +03:00
Gleb Natapov 1000ff8d89 KVM: Add trace points in irqchip code
Add tracepoint in msi/ioapic/pic set_irq() functions,
in IPI sending and in the point where IRQ is placed into
apic's IRR.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:11 +03:00
Michael S. Tsirkin bda9020e24 KVM: remove in_range from io devices
This changes bus accesses to use high-level kvm_io_bus_read/kvm_io_bus_write
functions. in_range now becomes unused so it is removed from device ops in
favor of read/write callbacks performing range checks internally.

This allows aliasing (mostly for in-kernel virtio), as well as better error
handling by making it possible to pass errors up to userspace.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:05 +03:00
Michael S. Tsirkin 6c47469453 KVM: convert bus to slots_lock
Use slots_lock to protect device list on the bus.  slots_lock is already
taken for read everywhere, so we only need to take it for write when
registering devices.  This is in preparation to removing in_range and
kvm->lock around it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:05 +03:00
Gleb Natapov c5af89b68a KVM: Introduce kvm_vcpu_is_bsp() function.
Use it instead of open code "vcpu_id zero is BSP" assumption.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:51 +03:00
Marcelo Tosatti 9f4cc12765 KVM: Grab pic lock in kvm_pic_clear_isr_ack
isr_ack is protected by kvm_pic->lock.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:48 +03:00
Gregory Haskins d76685c4a0 KVM: cleanup io_device code
We modernize the io_device code so that we use container_of() instead of
dev->private, and move the vtable to a separate ops structure
(theoretically allows better caching for multiple instances of the same
ops structure)

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:45 +03:00
Hannes Eder d7364a29b3 KVM: fix sparse warnings: context imbalance
Impact: Attribute function with __acquires(...) resp. __releases(...).

Fix this sparse warnings:
  arch/x86/kvm/i8259.c:34:13: warning: context imbalance in 'pic_lock' - wrong count at exit
  arch/x86/kvm/i8259.c:39:13: warning: context imbalance in 'pic_unlock' - unexpected unlock

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:13 +02:00
Gleb Natapov 4925663a07 KVM: Report IRQ injection status to userspace.
IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:11 +02:00
Marcelo Tosatti 44882eed2e KVM: make irq ack notifications aware of routing table
IRQ ack notifications assume an identity mapping between pin->gsi,
which might not be the case with, for example, HPET.

Translate before acking.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
2009-03-24 11:03:08 +02:00
Avi Kivity 3f353858c9 KVM: Add locking to virtual i8259 interrupt controller
While most accesses to the i8259 are with the kvm mutex taken, the call
to kvm_pic_read_irq() is not.  We can't easily take the kvm mutex there
since the function is called with interrupts disabled.

Fix by adding a spinlock to the virtual interrupt controller.  Since we
can't send an IPI under the spinlock (we also take the same spinlock in
an irq disabled context), we defer the IPI until the spinlock is released.
Similarly, we defer irq ack notifications until after spinlock release to
avoid lock recursion.

Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31 16:55:48 +02:00
Marcelo Tosatti e48258009d KVM: PIC: enhance IPI avoidance
The PIC code makes little effort to avoid kvm_vcpu_kick(), resulting in
unnecessary guest exits in some conditions.

For example, if the timer interrupt is routed through the IOAPIC, IRR
for IRQ 0 will get set but not cleared, since the APIC is handling the
acks.

This means that everytime an interrupt < 16 is triggered, the priority
logic will find IRQ0 pending and send an IPI to vcpu0 (in case IRQ0 is
not masked, which is Linux's case).

Introduce a new variable isr_ack to represent the IRQ's for which the
guest has been signalled / cleared the ISR. Use it to avoid more than
one IPI per trigger-ack cycle, in addition to the avoidance when ISR is
set in get_priority().

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15 14:25:28 +02:00
Marcelo Tosatti 85428ac7c3 KVM: fix i8259 reset irq acking
The irq ack during pic reset has three problems:

- Ignores slave/master PIC, using gsi 0-8 for both.
- Generates an ACK even if the APIC is in control.
- Depends upon IMR being clear, which is broken if the irq was masked
at the time it was generated.

The last one causes the BIOS to hang after the first reboot of
Windows installation, since PIT interrupts stop.

[avi: fix check whether pic interrupts are seen by cpu]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:19 +02:00
Marcelo Tosatti f52447261b KVM: irq ack notification
Based on a patch from: Ben-Ami Yassour <benami@il.ibm.com>
which was based on a patch from: Amit Shah <amit.shah@qumranet.com>

Notify IRQ acking on PIC/APIC emulation. The previous patch missed two things:

- Edge triggered interrupts on IOAPIC
- PIC reset with IRR/ISR set should be equivalent to ack (LAPIC probably
needs something similar).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Amit Shah <amit.shah@qumranet.com>
CC: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:16 +02:00
Avi Kivity 7edd0ce058 KVM: Consolidate PIC isr clearing into a function
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:14 +02:00
Ben-Ami Yassour c65bbfa1d6 KVM: check injected pic irq within valid pic irqs
Check that an injected pic irq is between 0 and 15.

Signed-off-by: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:42:39 +03:00
Laurent Vivier 92760499d0 KVM: kvm_io_device: extend in_range() to manage len and write attribute
Modify member in_range() of structure kvm_io_device to pass length and the type
of the I/O (write or read).

This modification allows to use kvm_io_device with coalesced MMIO.

Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20 12:42:30 +03:00
Avi Kivity edf884172e KVM: Move arch dependent files to new directory arch/x86/kvm/
This paves the way for multiple architecture support.  Note that while
ioapic.c could potentially be shared with ia64, it is also moved.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:18 +02:00