Commit Graph

13 Commits

Author SHA1 Message Date
Sia Jee Heng 66c6c9455e dmaengine: dw-axi-dmac: Add device_config operation
Add device_config() callback function so that the device address
can be passed to the dma driver.

DMA clients use this interface to pass in the device address to the
AxiDMA. Without this interface, data transfer between device to memory
and memory to device would failed.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-6-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng 67b2e39f4a dmaengine: dw-axi-dmac: Add device_synchronize() callback
Add support for device_synchronize() callback function to sync with
dmaengine_terminate_sync().

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-5-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng 0b9d2fb368 dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources()
The DMA memory block is created at driver load time and exist for
device lifetime. Move the dma_pool_create() to the ->chan_resource()
callback function allowing the DMA memory blocks to be created as needed
and destroyed when the channel is freed.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-4-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:14 +05:30
Sia Jee Heng ef6fb2d6f1 dmaengine: dw-axi-dmac: simplify descriptor management
Simplify and refactor the descriptor management by removing the redundant
Linked List Item (LLI) queue control logic from the AxiDMA driver.
The descriptor is split into virtual descriptor and hardware LLI so that
only hardware LLI memories are allocated from the DMA memory pool.

Up to 64 descriptors can be allocated within a PAGE_SIZE compare to 16
descriptors in previous version. This solves the problem where an
ALSA driver expects more than 16 DMA descriptors to run.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-3-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:14 +05:30
Krzysztof Kozlowski 60b6122e86 dmaengine: dw-axi-dmac: drop of_match_ptr from of_device_id table
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).  This fixes
compile warning (!CONFIG_OF on x86_64):

    drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c:984:34: warning:
        ‘dw_dma_of_id_table’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120162303.482126-2-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-24 23:02:20 +05:30
Sascha Hauer 51fe9cd2bd dmaengine: virt-dma: Add missing locking
Originally freeing descriptors was split into a locked and an unlocked
part. The locked part in vchan_get_all_descriptors() collected all
descriptors on a separate list_head. This was done to allow iterating
over that new list in vchan_dma_desc_free_list() without a lock held.

This became broken in 13bb26ae88 ("dmaengine: virt-dma: don't always
free descriptor upon completion"). With this commit
vchan_dma_desc_free_list() no longer exclusively operates on the
separate list, but starts to put descriptors which can be reused back on
&vc->desc_allocated. This list operation should have been locked, but
wasn't.
In the mean time drivers started to call vchan_dma_desc_free_list() with
their lock held so that we now have the situation that
vchan_dma_desc_free_list() is called locked from some drivers and
unlocked from others.
To clean this up we have to do two things:

1. Add missing locking in vchan_dma_desc_free_list()
2. Make sure drivers call vchan_dma_desc_free_list() unlocked

This needs to be done atomically, so in this patch the locking is added
and all drivers are fixed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Green Wan <green.wan@sifive.com>
Tested-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20191216105328.15198-3-s.hauer@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26 10:04:18 +05:30
Linus Torvalds 66b59f2b5e dmaengine fixes for v5.2-rc4
The fixes for this round are in drivers:
  - jz4780 transfer fix for acking descriptors early
  - fsl-qdma: clean registers on error
  - dw-axi-dmac: null pointer dereference fix
  - mediatek-cqdma: fix sleeping in atomic context
  - tegra210-adma: fix bunch os issues like crashing in driver
    probe, channel FIFO configuration etc.
  - sprd: Fixes for possible crash on descriptor status, block
    length overflow. For 2-stage transfer fix incorrect start,
    configuration and interrupt handling.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJc+3afAAoJEHwUBw8lI4NHYe0P/RVwZso3RKbAALFg6MJLyWun
 UpIJ9NA28xcKyghXa3mbq5gFgqkwJedACaXaik/wZr23+FJodg1afy7cfZRq3l5I
 arOmc7U2HK78L+h6T6JbIRP+pxIHHlrMaVwyO2ZwQ2jJmwwV/KyXgfxmv2ZIc1cg
 0M2C22pgy7oacK47eyjfcF/yH6PWARVaUlUHB+0pXXgwpImNl9IO+ritEzJg6hA2
 boltBfHX86XB/qfbnHaqo7bGUhEY4kqQafHKDNUh+jm7GgoI5biVC7dtH7liI0es
 U3I+RXFbOi4sxaY/j5aRgCNCnc7nUdU806ma3DPuTwybeca0ixttazjtB1p56ewU
 /NkhiuWf/qShZkepGlB50l7CAJ4Q0of2tPFr8pnI9OdZl8MzcoHIhN95IT/aEByf
 f0cbwv8lAeU948zm63axs5eS36M1yoV/cUzzeLatXWY3CS82FlTiEaWGnYkfZJ9j
 DNOr7WGk81A66kNEDIq65H9qQd86kRdNgoy1f7DNxBOjzVTzXGIATM+zpb3W/tsb
 Qb3i8OD9Lo4TzWCiDqbasGYKjAwGougcRKZWvSv/qfuItq/vGnChSNs7cMx73znJ
 EfgG+/kiKEn2hj9E5eSduqOrBaL4g+AJlqb93fpH54Jjr3QaupvhCZ2bYhrb9QrU
 rW3FZfGsAcrlsPbOlIOW
 =Ca0d
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:

 - jz4780 transfer fix for acking descriptors early

 - fsl-qdma: clean registers on error

 - dw-axi-dmac: null pointer dereference fix

 - mediatek-cqdma: fix sleeping in atomic context

 - tegra210-adma: fix bunch os issues like crashing in driver probe,
   channel FIFO configuration etc.

 - sprd: Fixes for possible crash on descriptor status, block length
   overflow. For 2-stage transfer fix incorrect start, configuration and
   interrupt handling.

* tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: sprd: Add interrupt support for 2-stage transfer
  dmaengine: sprd: Fix the right place to configure 2-stage transfer
  dmaengine: sprd: Fix block length overflow
  dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
  dmaengine: sprd: Add validation of current descriptor in irq handler
  dmaengine: sprd: Fix the possible crash when getting descriptor status
  dmaengine: tegra210-adma: Fix spelling
  dmaengine: tegra210-adma: Fix channel FIFO configuration
  dmaengine: tegra210-adma: Fix crash during probe
  dmaengine: mediatek-cqdma: sleeping in atomic context
  dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
  dmaengine: fsl-qdma: Add improvement
  dmaengine: jz4780: Fix transfers being ACKed too soon
2019-06-08 12:46:31 -07:00
Colin Ian King 0788611c9a dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
In the unlikely event that axi_desc_get returns a null desc in the
very first iteration of the while-loop the error exit path ends
up calling axi_desc_put on a null pointer 'first' and this causes
a null pointer dereference.  Fix this by adding a null check on
pointer 'first' before calling axi_desc_put.

Addresses-Coverity: ("Explicit null dereference")
Fixes: 1fe20f1b84 ("dmaengine: Introduce DW AXI DMAC driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21 14:25:52 +05:30
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Andy Shevchenko bdcb2c5d5e dmaengine: dw-axi-dmac: Fix trivia typo
Field name ststus_hi should be spelled as status_hi.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-08 22:36:18 +05:30
Huang Shijie c88c2d46e2 dmaengine: dw-axi-dmac: use dmaenginem_async_device_register to simplify the code
Use dmaenginem_async_device_register to simplify the code:
	remove dma_async_device_unregister.

Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-29 21:43:17 +05:30
Colin Ian King 6a28ba26f8 dmaengine: dw-axi-dmac: fix spelling mistake: "catched" -> "caught"
Trivial fix to spelling mistake in dev_err error message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-27 17:44:39 +05:30
Eugeniy Paltsev 1fe20f1b84 dmaengine: Introduce DW AXI DMAC driver
This patch adds support for the DW AXI DMAC controller.
DW AXI DMAC is a part of HSDK development board from Synopsys.

In this driver implementation only DMA_MEMCPY transfers are
supported.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-19 13:38:16 +05:30