Commit Graph

521 Commits

Author SHA1 Message Date
Linus Torvalds a9c9a6f741 SCSI misc on 20210902
This series consists of the usual driver updates (ufs, qla2xxx,
 target, smartpqi, lpfc, mpt3sas).  The core change causing the most
 churn was replacing the command request field request with a macro,
 allowing us to offset map to it and remove the redundant field; the
 same was also done for the tag field.  The most impactful change is
 the final removal of scsi_ioctl, which has been deprecated for over a
 decade.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
 4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
 hC3BUEW8f2LLnujWanQ=
 =lC5o
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, qla2xxx,
  target, smartpqi, lpfc, mpt3sas).

  The core change causing the most churn was replacing the command
  request field request with a macro, allowing us to offset map to it
  and remove the redundant field; the same was also done for the tag
  field.

  The most impactful change is the final removal of scsi_ioctl, which
  has been deprecated for over a decade"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
  scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
  scsi: ufs: ufs-exynos: Fix static checker warning
  scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
  scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
  scsi: lpfc: Copyright updates for 14.0.0.1 patches
  scsi: lpfc: Update lpfc version to 14.0.0.1
  scsi: lpfc: Add bsg support for retrieving adapter cmf data
  scsi: lpfc: Add cmf_info sysfs entry
  scsi: lpfc: Add debugfs support for cm framework buffers
  scsi: lpfc: Add support for maintaining the cm statistics buffer
  scsi: lpfc: Add rx monitoring statistics
  scsi: lpfc: Add support for the CM framework
  scsi: lpfc: Add cmfsync WQE support
  scsi: lpfc: Add support for cm enablement buffer
  scsi: lpfc: Add cm statistics buffer support
  scsi: lpfc: Add EDC ELS support
  scsi: lpfc: Expand FPIN and RDF receive logging
  scsi: lpfc: Add MIB feature enablement support
  scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
  scsi: fc: Add EDC ELS definition
  ...
2021-09-02 15:09:46 -07:00
Martin K. Petersen b3e2c72af1 scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
Use the SCSI midlayer interfaces to query protection interval, reference
tag, and per-command DIX flags.

Link: https://lore.kernel.org/r/20210817025014.12085-2-martin.petersen@oracle.com
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24 23:10:14 -04:00
Martin K. Petersen 315480209b Merge branch '5.14/scsi-fixes' into 5.15/scsi-staging
Resolve mpt3sas conflict between 5.14/scsi-fixes and 5.15/scsi-staging
reported by sfr.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11 22:37:22 -04:00
Bart Van Assche 24b3c922bc scsi: mpt3sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-31-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11 22:25:40 -04:00
Colin Ian King 40d3272793 scsi: mpt3sas: Fix incorrectly assigned error return and check
Currently the call to _base_static_config_pages() is assigning the error
return to variable 'rc' but checking the error return in error 'r'. Fix
this by assigning the error return to variable 'r' instead of 'rc'.

Link: https://lore.kernel.org/r/20210804134940.114011-1-colin.king@canonical.com
Fixes: 19a622c39a ("scsi: mpt3sas: Handle firmware faults during first half of IOC init")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
2021-08-09 23:46:19 -04:00
Damien Le Moal 4758fd91d5 scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
Similarly to AHCI, introduce the device sysfs attribute
sas_ncq_prio_supported to advertise if a SATA device supports the NCQ
priority feature. Without this new attribute, the user can only discover if
a SATA device supports NCQ priority by trying to enable the feature use
with the sas_ncq_prio_enable sysfs device attribute, which fails when the
device does not support high prioity commands.

Link: https://lore.kernel.org/r/20210807041859.579409-11-damien.lemoal@wdc.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-09 23:10:58 -04:00
Suganath Prabu S cdc1767698 scsi: mpt3sas: Update driver version to 39.100.00.00
Update driver version to 39.100.00.00.

Link: https://lore.kernel.org/r/20210809072639.21228-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-09 23:07:04 -04:00
Suganath Prabu S 787f2448c2 scsi: mpt3sas: Use firmware recommended queue depth
Currently, the mpt3sas driver sets the default queue depth based on the
physical interface of the attached device:

 - SAS : 254
 - SATA:  32
 - NVMe: 128

The IOC firmware provides a recommended queue depth for each device through
SAS IO Unit Page1 for SAS/SATA and PCIe IO Unit Page 1 for NVMe devices.

If the host sets the queue depth greater than the firmware recommended
value, then the IOC places the I/Os above the recommended queue depth in an
internal pending queue. This consumes outstanding host-credit/resources,
thereby leading to potential starvation of other devices.

To avoid this, use the device depth recommended by the IOC firmware.

Link: https://lore.kernel.org/r/20210809072639.21228-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-09 23:07:04 -04:00
Sreekanth Reddy 44f88ef3c9 scsi: mpt3sas: Bump driver version to 38.100.00.00
Bump driver version to 38.100.00.00.

Link: https://lore.kernel.org/r/20210803065134.19090-1-sreekanth.reddy@broadcom.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-09 22:58:08 -04:00
Sreekanth Reddy 432bc7caef scsi: mpt3sas: Add io_uring iopoll support
Enable the driver to work in non-IRQ mode, i.e. there will not be any MSI-X
vectors associated with queues dedicated to polling. The IOC hardware is
single submission queue and multiple reply queue. However, using the shared
host tagset support it is possible to simulate multiple hardware queues.

When poll_queues are enabled through the module parameter, the driver will
allocate extra reply queues without an MSI-X association. All I/O
completion on these queues will be done through the iopoll interface.

Link: https://lore.kernel.org/r/20210727081212.2742-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-09 22:55:50 -04:00
Sreekanth Reddy fae21608c3 scsi: mpt3sas: Transition IOC to Ready state during shutdown
The IOC firmware assumes that the host driver is still alive after shutdown
and continues to post events to host memory (due to faulty expander phy
links, etc). This leads to 0x2666 (a bus fault occurred during a host-IOC
memory access).

Perform an IOC soft reset as part of shutdown to disable event posting.

Link: https://lore.kernel.org/r/20210705145951.32258-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19 21:57:15 -04:00
Zhen Lei d6c2ce435f scsi: mpt3sas: Fix error return value in _scsih_expander_add()
When an expander does not contain any 'phys', an appropriate error code -1
should be returned, as done elsewhere in this function. However, we
currently do not explicitly assign this error code to 'rc'. As a result, 0
was incorrectly returned.

Link: https://lore.kernel.org/r/20210514081300.6650-1-thunder.leizhen@huawei.com
Fixes: f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-18 23:01:03 -04:00
Suganath Prabu S cf750be8e6 scsi: mpt3sas: Fix Coverity reported issue
Fix the structurally dead code (UNREACHABLE) type of error reported by
Coverity.

Link: https://lore.kernel.org/r/20210618155506.2609112-1-suganath-prabu.subramani@broadcom.com
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-18 23:01:03 -04:00
Martin K. Petersen 1ff28f229b Merge branch '5.14/scsi-result' into 5.14/scsi-staging
Include Hannes' SCSI command result rework in the staging branch.

[mkp: remove DRIVER_SENSE from mpi3mr]

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02 01:37:04 -04:00
Gustavo A. R. Silva 84a84cc6af scsi: mpt3sas: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding break statements instead of just letting
the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/20210528200828.GA39349@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02 00:56:15 -04:00
Hannes Reinecke f2b1e9c6f8 scsi: core: Introduce scsi_build_sense()
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer()
to format the buffer and set the correct SCSI status.

Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:21 -04:00
Suganath Prabu S a0815c45c8 scsi: mpt3sas: Handle firmware faults during second half of IOC init
If a firmware fault occurs while scanning the devices during IOC
initialization then the driver issues the hard reset operation to recover
the IOC. However, the driver is not issuing a Port enable request
message as part of hard reset operation during IOC initialization.  Due to
this, the driver will not receive get any device discovery-related events
and hence devices will not be accessible.

Teach the driver to gracefully handle firmware faults while scanning for
target devices during IOC initialization. Make the driver issue a port
enable request message as part of hard reset operation. This permits
receiving device discovery-related events from the firmware after the hard
reset operation completes.

Link: https://lore.kernel.org/r/20210518051625.1596742-4-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:20 -04:00
Suganath Prabu S 19a622c39a scsi: mpt3sas: Handle firmware faults during first half of IOC init
During first half of IOC initialization (i.e.  before going for device
scanning), if any firmware fault occurs then driver is aborting the IOC
initialization operation.

Modify the driver to issue a diag reset operation to recover IOC from fault
state and reinitialize the IOC.

Link: https://lore.kernel.org/r/20210518051625.1596742-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:20 -04:00
Suganath Prabu S e2fac6c44a scsi: mpt3sas: Fix deadlock while cancelling the running firmware event
Do not cancel current running firmware event work if the event type is
different from MPT3SAS_REMOVE_UNRESPONDING_DEVICES.  Otherwise a deadlock
can be observed while cancelling the current firmware event work if a hard
reset operation is called as part of processing the current event.

Link: https://lore.kernel.org/r/20210518051625.1596742-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:20 -04:00
Randy Dunlap 2910a4a9e9 scsi: mpt3sas: Documentation cleanup
Fix kernel-doc warnings, spellos, and typos.

drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool'
drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool'
mpt3sas_base.c:1362: warning: missing initial short description on line:
 * _base_display_reply_info -
mpt3sas_base.c:2151: warning: contents before sections
mpt3sas_base.c:2314: warning: missing initial short description on line:
 * base_make_prp_nvme -

Link: https://lore.kernel.org/r/20210418203246.782-1-rdunlap@infradead.org
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: MPT-FusionLinux.pdl@broadcom.com
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-10 13:24:04 -04:00
Bart Van Assche 3ad0b1da0d scsi: mpt3sas: Fix two kernel-doc headers
Fix the following warnings:

drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool'
drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool'

Link: https://lore.kernel.org/r/20210415220826.29438-10-bvanassche@acm.org
Fixes: d6adc251dd ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region")
Fixes: 7dd847dae1 ("scsi: mpt3sas: Force chain buffer allocations to be within same 4 GB region")
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Gustavo A. R. Silva 16660db3fc scsi: mpt3sas: Fix out-of-bounds warnings in _ctl_addnl_diag_query
Fix the following out-of-bounds warnings by embedding existing struct
htb_rel_query into struct mpt3_addnl_diag_query, instead of duplicating its
members:

include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds]
include/linux/fortify-string.h:22:29: warning: '__builtin_memset' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds]

The problem is that the original code is trying to copy data into a bunch
of struct members adjacent to each other in a single call to memcpy(). All
those members are exactly the same contained in struct htb_rel_query, so
instead of duplicating them into struct mpt3_addnl_diag_query, replace them
with new member rel_query of type struct htb_rel_query. So, now that this
new object is introduced, memcpy() doesn't overrun the length of
&karg.buffer_rel_condition, because the address of the new struct object
_rel_query_ is used as destination, instead. The same issue is present when
calling memset(), and it is fixed with this same approach.

Below is a comparison of struct mpt3_addnl_diag_query, before and after
this change (the size and cachelines remain the same):

$ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o
struct mpt3_addnl_diag_query {
	struct mpt3_ioctl_header   hdr;                  /*     0    12 */
	uint32_t                   unique_id;            /*    12     4 */
	uint16_t                   buffer_rel_condition; /*    16     2 */
	uint16_t                   reserved1;            /*    18     2 */
	uint32_t                   trigger_type;         /*    20     4 */
	uint32_t                   trigger_info_dwords[2]; /*    24     8 */
	uint32_t                   reserved2[2];         /*    32     8 */

	/* size: 40, cachelines: 1, members: 7 */
	/* last cacheline: 40 bytes */
};

$ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o
struct mpt3_addnl_diag_query {
	struct mpt3_ioctl_header   hdr;                  /*     0    12 */
	uint32_t                   unique_id;            /*    12     4 */
	struct htb_rel_query       rel_query;            /*    16    16 */
	uint32_t                   reserved2[2];         /*    32     8 */

	/* size: 40, cachelines: 1, members: 4 */
	/* last cacheline: 40 bytes */
};

Also, this helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines on
memcpy().

Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/60659889.bJJILx2THu3hlpxW%25lkp@intel.com/
Link: https://lore.kernel.org/r/20210401162054.GA397186@embeddedor
Build-tested-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13 00:31:05 -04:00
Sreekanth Reddy 3c8604691d scsi: mpt3sas: Block PCI config access from userspace during reset
While diag reset is in progress there is short duration where all access to
controller's PCI config space from the host needs to be blocked. This is
due to a hardware limitation of the IOC controllers.

Block all access to controller's config space from userland applications by
calling pci_cfg_access_lock() while diag reset is in progress and unlocking
it again after the controller comes back to ready state.

Link: https://lore.kernel.org/r/20210330105137.20728-1-sreekanth.reddy@broadcom.com
Cc: stable@vger.kernel.org #v5.4.108+
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05 23:32:43 -04:00
Sreekanth Reddy c0629d70ca scsi: mpt3sas: Fix endianness for ActiveCablePowerRequirement
Covert ActiveCablePowerRequirement's value to target CPU endian before
displaying it.

Link: https://lore.kernel.org/r/20210330105106.20569-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05 23:30:49 -04:00
Sreekanth Reddy 4c51f95696 scsi: mpt3sas: Only one vSES is present even when IOC has multi vSES
Whenever the driver is adding a vSES to virtual-phys list it is
reinitializing the list head. Hence those vSES devices which were added
previously are lost.

Stop reinitializing the list every time a new vSES device is added.

Link: https://lore.kernel.org/r/20210330105004.20413-1-sreekanth.reddy@broadcom.com
Cc: stable@vger.kernel.org #v5.11.10+
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05 23:29:56 -04:00
Martin K. Petersen 556666bce1 Merge branch '5.12/scsi-fixes' into 5.13/scsi-staging
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for
some UFS changes that would otherwise cause conflicts during the
merge.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05 22:57:29 -04:00
Bhaskar Chowdhury 206a3afa94 scsi: mpt3sas: Fix a typo
s/encloure/enclosure/

Link: https://lore.kernel.org/r/20210322032145.2242520-1-unixbhaskar@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-24 22:58:06 -04:00
Jia-Ju Bai 3401ecf7fc scsi: mpt3sas: Fix error return code of mpt3sas_base_attach()
When kzalloc() returns NULL, no error return code of mpt3sas_base_attach()
is assigned. To fix this bug, r is assigned with -ENOMEM in this case.

Link: https://lore.kernel.org/r/20210308035241.3288-1-baijiaju1990@gmail.com
Fixes: c696f7b83e ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-24 22:07:45 -04:00
Lee Jones a8d548b0b3 scsi: mpt3sas: Fix a few kernel-doc issues
Fixes the following W=1 kernel build warning(s):

 drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: Function parameter or member 'sas_address' not described in '__mpt3sas_get_sdev_by_addr'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: expecting prototype for mpt3sas_get_sdev_by_addr(). Prototype was for __mpt3sas_get_sdev_by_addr() instead
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:4535: warning: expecting prototype for _scsih_check_for_pending_internal_cmds(). Prototype was for mpt3sas_check_for_pending_internal_cmds() instead
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'port_entry' not described in '_scsih_look_and_get_matched_port_entry'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'matched_port_entry' not described in '_scsih_look_and_get_matched_port_entry'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'count' not described in '_scsih_look_and_get_matched_port_entry'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:6959: warning: Function parameter or member 'port' not described in 'mpt3sas_expander_remove'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:10494: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_pre_reset_handler() instead
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:10536: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_reset_done_handler() instead
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:12303: warning: expecting prototype for scsih__ncq_prio_supp(). Prototype was for scsih_ncq_prio_supp() instead

Link: https://lore.kernel.org/r/20210317091230.2912389-15-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-18 23:35:55 -04:00
Suganath Prabu S 37067b9793 scsi: mpt3sas: Update driver version to 37.101.00.00
Update driver version to 37.101.00.00.

Link: https://lore.kernel.org/r/20210305102904.7560-8-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-18 22:18:09 -04:00
Suganath Prabu S c569de899b scsi: mpt3sas: Force reply post array allocations to be within same 4 GB region
According to the MPI specification, reply post array buffers can not cross
a 4 GB boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-7-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-18 22:18:08 -04:00
Suganath Prabu S 2e4e858732 scsi: mpt3sas: Force reply post buffer allocations to be within same 4 GB region
According to the MPI specification, reply post buffers can not cross a 4 GB
boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-6-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-18 22:18:08 -04:00
Suganath Prabu S 58501fd937 scsi: mpt3sas: Force reply buffer allocations to be within same 4 GB region
According to the MPI specification, reply buffers can not cross a 4 GB
boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-5-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-18 22:18:08 -04:00
Suganath Prabu S 970ac2bb70 scsi: mpt3sas: Force sense buffer allocations to be within same 4 GB region
According to the MPI specification, sense buffers can not cross a 4 GB
boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-4-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-18 22:18:08 -04:00
Suganath Prabu S 7dd847dae1 scsi: mpt3sas: Force chain buffer allocations to be within same 4 GB region
According to the MPI specification, chain buffers can not cross a 4 GB
boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-18 22:18:08 -04:00
Suganath Prabu S d6adc251dd scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region
According to the MPI specification, PCIe SGL buffers can not cross a 4 GB
boundary.

While allocating, if any buffer crosses the 4 GB boundary, then:

 - Release the already allocated memory pools; and

 - Reallocate them by changing the DMA coherent mask to 32-bit

Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-17 00:04:41 -04:00
Gustavo A. R. Silva a1c4d77413 scsi: mpt3sas: Replace unnecessary dynamic allocation with a static one
Dynamic memory allocation isn't actually needed and it can be replaced by
statically allocating memory for struct object io_unit_pg3 with 36
hardcoded entries for its GPIOVal array.

Also, this helps the with ongoing efforts to enable -Warray-bounds by
fixing the following warning:

drivers/scsi/mpt3sas/mpt3sas_ctl.c: In function ‘BRM_status_show’:
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:63: warning: array subscript 24 is above array bounds of ‘U16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
 3257 |  backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
./include/uapi/linux/byteorder/little_endian.h:36:51: note: in definition of macro ‘__le16_to_cpu’
   36 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
      |                                                   ^
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:31: note: in expansion of macro ‘le16_to_cpu’
 3257 |  backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);

Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/202103101058.16ED27BE3@keescook/
Link: https://lore.kernel.org/r/20210310235951.GA108661@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-17 00:04:40 -04:00
Christophe JAILLET a50bd64616 scsi: mpt3sas: Do not use GFP_KERNEL in atomic context
mpt3sas_get_port_by_id() can be called when a spinlock is held. Use
GFP_ATOMIC instead of GFP_KERNEL when allocating memory.

Issue spotted by call_kern.cocci:
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7125 inside lock on line 7123 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6842 inside lock on line 6839 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6854 inside lock on line 6851 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7706 inside lock on line 7702 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 10260 inside lock on line 10256 but uses GFP_KERNEL

Link: https://lore.kernel.org/r/20210220093951.905362-1-christophe.jaillet@wanadoo.fr
Fixes: 324c122fc0 ("scsi: mpt3sas: Add module parameter multipath_on_hba")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-16 23:08:15 -04:00
Lee Jones 782a1ab33f scsi: mpt3sas: Fix some kernel-doc misnaming issues
Fixes the following W=1 kernel build warning(s):

 drivers/scsi/mpt3sas/mpt3sas_ctl.c:463: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_pre_reset_handler() instead
 drivers/scsi/mpt3sas/mpt3sas_ctl.c:495: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_clear_outstanding_ioctls() instead
 drivers/scsi/mpt3sas/mpt3sas_ctl.c:512: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_reset_done_handler() instead
 drivers/scsi/mpt3sas/mpt3sas_ctl.c:2771: warning: expecting prototype for _ ctl_ioctl_compat(). Prototype was for _ctl_ioctl_compat() instead
 drivers/scsi/mpt3sas/mpt3sas_ctl.c:2789: warning: expecting prototype for _ ctl_mpt2_ioctl_compat(). Prototype was for _ctl_mpt2_ioctl_compat() instead
 drivers/scsi/mpt3sas/mpt3sas_ctl.c:3061: warning: expecting prototype for sas_address_show(). Prototype was for host_sas_address_show() instead
 drivers/scsi/mpt3sas/mpt3sas_ctl.c:3682: warning: expecting prototype for diag_trigger_scsi_show(). Prototype was for diag_trigger_mpi_show() instead
 drivers/scsi/mpt3sas/mpt3sas_ctl.c:3941: warning: expecting prototype for sas_ncq_io_prio_show(). Prototype was for sas_ncq_prio_enable_show() instead

Link: https://lore.kernel.org/r/20210312094738.2207817-10-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15 22:28:57 -04:00
Lee Jones 54cb88dc30 scsi: mpt3sas: Fix a couple of misdocumented functions/params
Fixes the following W=1 kernel build warning(s):

 drivers/scsi/mpt3sas/mpt3sas_transport.c:71: warning: Function parameter or member 'phy' not described in '_transport_get_port_id_by_sas_phy'
 drivers/scsi/mpt3sas/mpt3sas_transport.c:354: warning: Function parameter or member 'port_id' not described in '_transport_expander_report_manufacture'
 drivers/scsi/mpt3sas/mpt3sas_transport.c:354: warning: expecting prototype for transport_expander_report_manufacture(). Prototype was for _transport_expander_report_manufacture() instead
 drivers/scsi/mpt3sas/mpt3sas_transport.c:684: warning: Function parameter or member 'hba_port' not described in 'mpt3sas_transport_port_add'
 drivers/scsi/mpt3sas/mpt3sas_transport.c:684: warning: Excess function parameter 'port' description in 'mpt3sas_transport_port_add'

Link: https://lore.kernel.org/r/20210312094738.2207817-7-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15 22:28:57 -04:00
Lee Jones cf9e575e62 scsi: mpt3sas: Fix a bunch of potential naming doc-rot
Fixes the following W=1 kernel build warning(s):

 drivers/scsi/mpt3sas/mpt3sas_config.c:1795: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg0(). Prototype was for _config_set_driver_trigger_pg0() instead
 drivers/scsi/mpt3sas/mpt3sas_config.c:1929: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg1(). Prototype was for _config_set_driver_trigger_pg1() instead
 drivers/scsi/mpt3sas/mpt3sas_config.c:2080: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg2(). Prototype was for _config_set_driver_trigger_pg2() instead
 drivers/scsi/mpt3sas/mpt3sas_config.c:2240: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg3(). Prototype was for _config_set_driver_trigger_pg3() instead
 drivers/scsi/mpt3sas/mpt3sas_config.c:2397: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg4(). Prototype was for _config_set_driver_trigger_pg4() instead

Link: https://lore.kernel.org/r/20210312094738.2207817-2-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15 22:28:56 -04:00
Lee Jones 2111ba8781 scsi: mpt3sas: Move a little data from the stack onto the heap
Fixes the following W=1 kernel build warning(s):

 drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function ‘_scsih_scan_for_devices_after_reset’:
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:10473:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Link: https://lore.kernel.org/r/20210303144631.3175331-31-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15 22:14:54 -04:00
Lee Jones e015e0ded1 scsi: mpt3sas: Fix misspelling of _base_put_smid_default_atomic()
Fixes the following W=1 kernel build warning(s):

 drivers/scsi/mpt3sas/mpt3sas_base.c:4185: warning: expecting prototype for _base_put_smid_default(). Prototype was for _base_put_smid_default_atomic() instead

Link: https://lore.kernel.org/r/20210303144631.3175331-29-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15 22:14:54 -04:00
Ming Lei 020b0f0a31 scsi: core: Replace sdev->device_busy with sbitmap
SCSI currently uses an atomic variable to track queue depth for each
attached device. The queue depth depends on many factors such as transport
type and device implementation. In addition, the SCSI device queue depth is
not a static entity but changes over time as a result of congestion
management.

While blk-mq currently tracks queue depth for each hctx, it can't easily be
changed to accommodate the SCSI per-device requirement.

The current approach of using an atomic variable doesn't scale well when
there are lots of CPU cores and the disk is very fast. IOPS can be
substantially impacted by the atomic in the hot path.

Replace the atomic variable sdev->device_busy with an sbitmap for tracking
the SCSI device queue depth.

It has been observed that IOPS is improved ~30% by this patchset in the
following test:

1) test machine(32 logical CPU cores)
	Thread(s) per core:  2
	Core(s) per socket:  8
	Socket(s):           2
	NUMA node(s):        2
	Model name:          Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz

2) setup scsi_debug:
modprobe scsi_debug virtual_gb=128 max_luns=1 submit_queues=32 delay=0 max_queue=256

3) fio script:
fio --rw=randread --size=128G --direct=1 --ioengine=libaio --iodepth=2048 \
	--numjobs=32 --bs=4k --group_reporting=1 --group_reporting=1 --runtime=60 \
	--loops=10000 --name=job1 --filename=/dev/sdN

[mkp: fix device_busy reference in mpt3sas]

Link: https://lore.kernel.org/r/20210122023317.687987-14-ming.lei@redhat.com
Link: https://lore.kernel.org/linux-block/20200119071432.18558-6-ming.lei@redhat.com/
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:37:00 -05:00
Ming Lei 8278807abd scsi: core: Add scsi_device_busy() wrapper
Add scsi_device_busy() helper to prepare drivers for tracking device queue
depth via sbitmap_queue.

Link: https://lore.kernel.org/r/20210122023317.687987-12-ming.lei@redhat.com
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:37:00 -05:00
Suganath Prabu S 446b5f3d3f scsi: mpt3sas: Update driver version to 37.100.00.00
Update driver version to 37.100.00.00.

Link: https://lore.kernel.org/r/20210204033724.1345-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-08 22:02:07 -05:00
Suganath Prabu S 688c1a0a13 scsi: mpt3sas: Additional diagnostic buffer query interface
When a host trace buffer is released, applications never know for what
reason the buffer is released. Add a new IOCTL MPT3ADDNLDIAGQUERY to
provide the trigger information due to which the diag buffer is released.

Link: https://lore.kernel.org/r/20210204033724.1345-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-08 22:02:07 -05:00
Sreekanth Reddy 664f0dce20 scsi: mpt3sas: Add support for shared host tagset for CPU hotplug
MPT Fusion adapters can steer completions to individual queues and we now
have support for shared host-wide tags in the I/O stack. The addition of
the host-wide tags allows us to enable multiqueue support for MPT Fusion
adapters. Once host-wise tags are enabled, the CPU hotplug feature is also
supported.

Allow use of host-wide tags to be disabled through the "host_tagset_enable"
module parameter. Once we do not have any major performance regressions
using host-wide tags, we will drop the hand-crafted interrupt affinity
settings.

Performance is meeting expectations. About 3.1M IOPS using 24 Drive SSD on
Aero controllers.

Link: https://lore.kernel.org/r/20210202095832.23072-1-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-08 21:53:12 -05:00
Sreekanth Reddy d309ae0732 scsi: mpt3sas: Fix ReplyPostFree pool allocation
Currently the driver allocates memory for ReplyPostFree queues in chunks of
16. In resource constrained environments--such as VM with 1 GB RAM and 2
CPUs--memory allocation for ReplyPostFree pools may fail because the driver
tries to allocate a memory for 16 ReplyPostFree queues even though the
actual number needed is 2.

Change the driver to allocate memory for only the actual number of queues
needed if the ReplyPostFree queue count is less than 16.

Link: https://lore.kernel.org/r/20210201141522.25363-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-08 21:53:12 -05:00
YANG LI bfb3f00c06 scsi: mpt3sas: Simplify bool comparison
Fix the following coccicheck warning:

./drivers/scsi/mpt3sas/mpt3sas_base.c:2424:5-20: WARNING: Comparison of 0/1
to bool variable

Link: https://lore.kernel.org/r/1610355253-25960-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22 21:55:39 -05:00