The gc0310 uses 8 bit register addresses which makes it compatible
with the standard smbus access functions.
Drop the custom reg access helpers, replacing them with the smbus
access functions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
enum gc0310_tok_type / the data_length read/write parameter
is always GC0310_8BIT, drop this.
Note for the register-lists the indentation is also fixed and
c++ style comments are converted to regular C-style /* */ comments.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the complex optimization to send multiple registers in
one i2c-transfer. None of the other sensor drivers are doing this
and the reg-lists are only used once at stream-start time, so
this does not need to be highly optimized.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the ability to have special tokens in a reg-list,
GC0310_TOK_DELAY is not used and GC0310_TOK_TERM can be replaced
with ARRAY_SIZE, simplifying the code.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Drop the unused struct gc0310_format and struct regval_list definitions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix 3 error handling issues:
1. In ov2680_s_stream(), when pm_runtime_get_sync() fails it will still
have incremented the pm-runtime reference count so we need to call
pm_runtime_put()
2. In ov2680_s_stream() sensor->is_streaming should always be set to false
when the sensor is powered-off even on i2c-communication errors.
3. In ov2680_probe(), call ov2680_remove() on ov2680_s_config() errors,
so that pm_runtime_disable() is properly called to disable the
runtime-pm which has been enabled before the ov2680_s_config() call.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use the new v4l2_get_acpi_sensor_info() for the GPIO lookups,
this uses the special Intel _DSM method to get more info about
the GPIOs like their function and their polarity.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ACPI nodes describing sensors on atomisp devices implement a
"79234640-9e10-4fea-a5c1-b5aa8b19756f" Device Specific Method (DSM)
to get info about the GPIOs.
Using this method is necessary to figure out which ACPI GPIO resource
is "reset" and which one is "powerdown" and this is also necessary to
figure out the correct polarity of the pins.
One example where this is necessary is the GC0310 sensor. The current
GC0310 code hardcodes reset as being active-low and power-down as being
active-high. This works on a number of devices such as the mpman
converter 9. But it is wrong for the Chuwi Vi8 CWI501 where the powerdown
pin is active-low.
Rather then adding DMI quirks for this, add a helper for this,
which can be shared between sensor-drivers. This new helper optionally
also returns a string identifying the exact sensor-module used, which
might be useful if any module specific behvior is necessary in the sensor
driver.
This uses the DSM directly on the sensor device's ACPI node. This is
different from later Intel hardware (IPU3 / IPU6) which has a separate
INT3472 node (with its own driver) with this info.
Since there is no separate ACPI node to which we can bind to register GPIO
lookups, this unfortunately means that all sensor drivers which may be used
on BYT or CHT hw need to call this new helper.
Note for now this function is being added to atomisp_gmin_platform.c,
but once things are ready to move atomisp over to using generic sensor
drivers this will need to become a generic v4l2 sensor helper. but this
will require upstream discussion first.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
(patch based on intel-aero kernel patch:
26fc9fe503)
Here is the original commit message from the aforementioned patch:
From 26fc9fe5030b63bc9dcf0b5f32981948911ca272 Mon Sep 17 00:00:00 2001
From: Lucas De Marchi <lucas.demarchi@intel.com>
Date: Fri, 7 Jul 2017 14:23:53 -0700
Subject: [PATCH] linux-yocto: Remove remaining instance of call to
trace_printk
It's not sufficient to leave trace_printk() out of "normal call chains" since
the way trace infrastructure works is that it will allocate the trace_printk
buffers if the symbol is there (by using a separate section for the function
and checking if __start_* and __stop_* symbols are different.
Therefore, even if the default value for the param tells the module to use
printk(), just the fact that it can be changed to trace_printk() means the
initialization code will be called.
The trace_printk() was replaced by pr_info() on commit 3d81099c75
("media: atomisp: Replace trace_printk by pr_info") for the upstreamed
atomisp, too. However, as the aforementioned commit message says, there
is still a remaining instance. This causes the "trace_printk() being
used" kernel warning message to still appear on the first driver load.
Based on the aforementioned patch, this patch removes the call to
ftrace_vprintk(). This removes that kernel warning.
In addition to this, this patch also removes the following now unused
things:
- now empty atomisp_css2_dbg_ftrace_print()
- trace_printk option from dbg_func kernel parameter
Link: https://lore.kernel.org/r/20211017161958.44351-15-kitakar@gmail.com
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
online_process is always true, remove it.
Link: https://lore.kernel.org/r/20230221145906.8113-11-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
yuvpp_mode is never set, so it always is false remove it.
Link: https://lore.kernel.org/r/20230221145906.8113-10-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ATOMISP_USE_YUVPP() always returns false, so remove it and remove any
code-paths which only run when it would return true.
Link: https://lore.kernel.org/r/20230221145906.8113-9-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Nothing registers subdevs with the SOC_CAMERA, XENON_FLASH and FILE_INPUT
types, remove the code for these.
Link: https://lore.kernel.org/r/20230221145906.8113-8-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
atomisp_get_metadata_type() always returns ATOMISP_MAIN_METADATA,
replace its uses with ATOMISP_MAIN_METADATA and remove it.
Link: https://lore.kernel.org/r/20230221145906.8113-7-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the now unused atomisp_css_enable_raw_binning() function.
Link: https://lore.kernel.org/r/20230221145906.8113-6-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the crop_needs_override local helper variable from
atomisp_set_fmt(), as it always is true now.
Link: https://lore.kernel.org/r/20230221145906.8113-5-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
After the continues-mode removal the delayed-work never gets queues
remove all the related code.
Link: https://lore.kernel.org/r/20230221145906.8113-4-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Continues mode is a special mode where 2 /dev/video devices can be active
at the same time. Either the video-preview + video nodes or the
viewfinder (for still capture) + capture nodes.
For the video-preview + video-recording case modern userspace will
use a single stream multiplexed by pipewire.
The still-capture case is extra special only starting the preview
stream and then relying on a custom ATOMISP_IOC_S_CONT_CAPTURE_CONFIG
ioctl to set things up followed by a second stream on to capture
the amount of configured still pictures. While running the sensor
at full resolution all the time. This case too is better handled
with dma-buf + GPU downscaling for the view-finder rather then all this
custom special code. Besises this the ioctl expects a bunch of special
non error checked conditions to be met otherwise things will crash/hang.
The continues mode also involves a special cases all over the code
getting in the way of further cleanups and simplifying the code to
using just 1 /dev/video# node. So lets remove it and the
related custom ATOMISP_IOC_S_CONT_CAPTURE_CONFIG ioctl.
Link: https://lore.kernel.org/linux-media/ea81b17b-7d1f-a5e1-11dd-04db310e1e50@redhat.com/
Link: https://lore.kernel.org/r/20230221145906.8113-3-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove support for depth mode. This is a special mode where 2 streams
(from 2 different sensors) can be setup and then starting/stopping
1 will automatically also start/stop the other.
Like many of these special features I'm pretty sure that if the queue
setup is not done exactly right things will crash and there is no error
checking for this.
This seems to be for stereoscopic vision and the only known hw which
actually supports this is the Intel Aero board/SDK, all other 1000+
BYT/CHT models don't need this.
This false outside of the standard webcam use scenario which we are
trying to get working and this involves a bunch of hacks / special
exceptions all over the code, so lets remove this.
Link: https://lore.kernel.org/linux-media/ea81b17b-7d1f-a5e1-11dd-04db310e1e50@redhat.com/
Link: https://lore.kernel.org/r/20230221145906.8113-2-hdegoede@redhat.com
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The vs6624 camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v4.17. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sr030pc30 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v2.6.37. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The s5k6aa camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.11. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The noon010pc30 camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.16. A device tree file
referencing the device has been added in v3.17, but without
corresponding DT bindings, and with DT support in the driver. The driver
thus hasn't been used since v316. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mt9t001 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.2. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mt9m032 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.4. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The m5mols camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.11. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ad9389b video encoder driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.7. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
clear slot next desc ptr if config error,
otherwise codec will report config error interrupt repeatedly,
it may led to system hang.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ABGR64_12 is a reversed RGB format with alpha channel last,
12 bits per component like ABGR32,
expanded to 16bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
BGR48_12 is a reversed RGB format with 12 bits per component like BGR24,
expanded to 16bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
YUV48_12 is a YUV format with 12-bits per component like YUV24,
expanded to 16bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
[hverkuil: replaced a . by ,]
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Y212 is a YUV format with 12-bits per component like YUYV,
expanded to 16bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
Add the missing v4l2 foramt info of Y212
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Y012 is a luma-only formats with 12-bits per pixel,
expanded to 16bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
P012 is a YUV format with 12-bits per component with interleaved UV,
like NV12, expanded to 16 bits.
Data in the 12 high bits, zeros in the 4 low bits,
arranged in little endian order.
And P012M has two non contiguous planes.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add new ioctls to set and get subdev client capabilities. Client in this
context means the userspace application which opens the subdev device
node. The client capabilities are stored in the file handle of the
opened subdev device node, and the client must set the capabilities for
each opened subdev.
For now we only add a single flag, V4L2_SUBDEV_CLIENT_CAP_STREAMS, which
indicates that the client is streams-aware.
The reason for needing such a flag is as follows:
Many structs passed via ioctls, e.g. struct v4l2_subdev_format, contain
reserved fields (usually a single array field). These reserved fields
can be used to extend the ioctl. The userspace is required to zero the
reserved fields.
We recently added a new 'stream' field to many of these structs, and the
space for the field was taken from these reserved arrays. The assumption
was that these new 'stream' fields are always initialized to zero if the
userspace does not use them. This was a mistake, as, as mentioned above,
the userspace is required to zero the _reserved_ fields. In other words,
there is no requirement to zero this new stream field, and if the
userspace doesn't use the field (which is the case for all userspace
applications at the moment), the field may contain random data.
This shows that the way the reserved fields are defined in v4l2 is, in
my opinion, somewhat broken, but there is nothing to do about that.
To fix this issue we need a way for the userspace to tell the kernel
that the userspace has indeed set the 'stream' field, and it's fine for
the kernel to access it. This is achieved with the new ioctl, which the
userspace should usually use right after opening the subdev device node.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With these changes it now passes the v4l2-compliance test.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
V4L2_STD_ALL advertises more standards than these boards
actually support. This causes a V4L2 compliance issue. Limit
the supported standards to those that are actually implemented.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The vbi stream comes from the same video input as the video
stream. So all the related ioctls to that are just as valid
for the vbi stream.
Add these.
This fixes a V4L2 compliance issue.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Support for VIDIOC_TRY_FMT for the vbi device was missing.
Add it.
This fixes a V4L2 compliance issue.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The tuner input uses different tvnorms compared to the
S-Video/Composite inputs. So update the tvnorms field
in struct video_device when switching inputs.
This fixes a V4L2 compliance issue.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If the requested TV standard is identical to the current
TV standard, then return 0, even when the vb2 queues are
busy.
This fixes a V4L2 compliance issue.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There was no check for the minimum width and height, so
0 values were just passed on. Fix this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The initial field value of the format is ANY, which isn't allowed.
Change to INTERLACED.
VIDIOC_TRY_FMT will overwrite vv->last_field, which is an
unwanted side-effect, so drop this.
And finally vidioc_s_fmt_vid_cap didn't initialize vv->last_field
correctly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Convert this driver from the old videobuf framework to the vb2
frame.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When building the pgtables, use for_each_sg_dma_page.
Also clean up the code a bit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The U and V components were swapped. Drop the FORMAT_BYTE_SWAP
to fix this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
No need for BUG_ON, WARN_ON is a lot friendlier.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede