There's been a few requests for supporting more fixed files than 1024.
This isn't really tricky to do, we just need to split up the file table
into multiple tables and index appropriately. As we do so, reduce the
max single file table to 512. This enables us to do single page allocs
always for the tables, which is an improvement over the situation prior.
This patch adds support for up to 64K files, which should be enough for
everyone.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We index the file tables with a user given value. After we check
it's within our limits, use array_index_nospec() to prevent any
spectre attacks here.
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows an application to call accept4() in an async fashion. Like
other opcodes, we first try a non-blocking accept, then punt to async
context if we have to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation for adding opcodes that need to add new files
in a process file table, system calls like open(2) or accept4(2).
If an opcode needs this, it must set IO_WQ_WORK_NEEDS_FILES in the work
item. If work that needs to get punted to async context have this
set, the async worker will assume the original task file table before
executing the work.
Note that opcodes that need access to the current files of an
application cannot be done through IORING_SETUP_SQPOLL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop various work-arounds we have for workqueues:
- We no longer need the async_list for tracking sequential IO.
- We don't have to maintain our own mm tracking/setting.
- We don't need a separate workqueue for buffered writes. This didn't
even work that well to begin with, as it was suboptimal for multiple
buffered writers on multiple files.
- We can properly cancel pending interruptible work. This fixes
deadlocks with particularly socket IO, where we cannot cancel them
when the io_uring is closed. Hence the ring will wait forever for
these requests to complete, which may never happen. This is different
from disk IO where we know requests will complete in a finite amount
of time.
- Due to being able to cancel work interruptible work that is already
running, we can implement file table support for work. We need that
for supporting system calls that add to a process file table.
- It gets us one step closer to adding async support for any system
call.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit fb5ccc9878 ("io_uring: Fix broken links with offloading")
introduced a potential performance regression with unconditionally
taking mm even for READ/WRITE_FIXED operations.
Return the logic handling it back. mm-faulted requests will go through
the generic submission path, so honoring links and drains, but will
fail further on req->has_user check.
Fixes: fb5ccc9878 ("io_uring: Fix broken links with offloading")
Cc: stable@vger.kernel.org # v5.4
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
submit->index is used only for inbound check in submission path (i.e.
head < ctx->sq_entries). However, it always will be true, as
1. it's already validated by io_get_sqring()
2. ctx->sq_entries can't be changedd in between, because of held
ctx->uring_lock and ctx->refs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To trace io_uring activity one can get an information from workqueue and
io trace events, but looks like some parts could be hard to identify via
this approach. Making what happens inside io_uring more transparent is
important to be able to reason about many aspects of it, hence introduce
the set of tracing events.
All such events could be roughly divided into two categories:
* those, that are helping to understand correctness (from both kernel
and an application point of view). E.g. a ring creation, file
registration, or waiting for available CQE. Proposed approach is to
get a pointer to an original structure of interest (ring context, or
request), and then find relevant events. io_uring_queue_async_work
also exposes a pointer to work_struct, to be able to track down
corresponding workqueue events.
* those, that provide performance related information. Mostly it's about
events that change the flow of requests, e.g. whether an async work
was queued, or delayed due to some dependencies. Another important
case is how io_uring optimizations (e.g. registered files) are
utilized.
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We might have cases where the need for a specific timeout is gone, add
support for canceling an existing timeout operation. This works like the
POLL_REMOVE command, where the application passes in the user_data of
the timeout it wishes to cancel in the sqe->addr field.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a pretty trivial addition on top of the relative timeouts
we have now, but it's handy for ensuring tighter timing for those
that are building scheduling primitives on top of io_uring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no function change, just to clean up the code, use s->in_async
to make the code know where it is.
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently size the CQ ring as twice the SQ ring, to allow some
flexibility in not overflowing the CQ ring. This is done because the
SQE life time is different than that of the IO request itself, the SQE
is consumed as soon as the kernel has seen the entry.
Certain application don't need a huge SQ ring size, since they just
submit IO in batches. But they may have a lot of requests pending, and
hence need a big CQ ring to hold them all. By allowing the application
to control the CQ ring size multiplier, we can cater to those
applications more efficiently.
If an application wants to define its own CQ ring size, it must set
IORING_SETUP_CQSIZE in the setup flags, and fill out
io_uring_params->cq_entries. The value must be a power of two.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allows the application to remove/replace/add files to/from a file set.
Passes in a struct:
struct io_uring_files_update {
__u32 offset;
__s32 *fds;
};
that holds an array of fds, size of array passed in through the usual
nr_args part of the io_uring_register() system call. The logic is as
follows:
1) If ->fds[i] is -1, the existing file at i + ->offset is removed from
the set.
2) If ->fds[i] is a valid fd, the existing file at i + ->offset is
replaced with ->fds[i].
For case #2, is the existing file is currently empty (fd == -1), the
new fd is simply added to the array.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation for allowing updates to fixed file sets without
requiring a full unregister+register.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently any dependent link is executed from a new workqueue context,
which means that we'll be doing a context switch per link in the chain.
If we are running the completion of the current request from our async
workqueue and find that the next request is a link, then run it directly
from the workqueue context instead of forcing another switch.
This improves the performance of linked SQEs, and reduces the CPU
overhead.
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzkaller reported an issue where it looks like a malicious app can
trigger a use-after-free of reading the ctx ->sq_array and ->rings
value right after having installed the ring fd in the process file
table.
Defer ring fd installation until after we're done reading those
values.
Fixes: 75b28affdd ("io_uring: allocate the two rings together")
Reported-by: syzbot+6f03d895a6cd0d06187f@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_queue_link_head() owns shadow_req after taking it as an argument.
By not freeing it in case of an error, it can leak the request along
with taken ctx->refs.
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently assume that submissions from the sqthread are successful,
and if IO polling is enabled, we use that value for knowing how many
completions to look for. But if we overflowed the CQ ring or some
requests simply got errored and already completed, they won't be
available for polling.
For the case of IO polling and SQTHREAD usage, look at the pending
poll list. If it ever hits empty then we know that we don't have
anymore pollable requests inflight. For that case, simply reset
the inflight count to zero.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently use the ring values directly, but that can lead to issues
if the application is malicious and changes these values on our behalf.
Created in-kernel cached versions of them, and just overwrite the user
side when we update them. This is similar to how we treat the sq/cq
ring tail/head updates.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_ring_submit() finalises with
1. io_commit_sqring(), which releases sqes to the userspace
2. Then calls to io_queue_link_head(), accessing released head's sqe
Reorder them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sq_thread() processes sqes by 8 without considering links. As a
result, links will be randomely subdivided.
The easiest way to fix it is to call io_get_sqring() inside
io_submit_sqes() as do io_ring_submit().
Downsides:
1. This removes optimisation of not grabbing mm_struct for fixed files
2. It submitting all sqes in one go, without finer-grained sheduling
with cq processing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a bug, where failed linked requests are returned not with
specified @user_data, but with garbage from a kernel stack.
The reason is that io_fail_links() uses req->user_data, which is
uninitialised when called from io_queue_sqe() on fail path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sequence number of the timeout req (req->sequence) indicate the
expected completion request. Because of each timeout req consume a
sequence number, so the sequence of each timeout req on the timeout
list shouldn't be the same. But now, we may get the same number (also
incorrect) if we insert a new entry before the last one, such as submit
such two timeout reqs on a new ring instance below.
req->sequence
req_1 (count = 2): 2
req_2 (count = 1): 2
Then, if we submit a nop req, req_2 will still timeout even the nop req
finished. This patch fix this problem by adjust the sequence number of
each reordered reqs when inserting a new entry.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sequence number of reqs on the timeout_list before the timeout req
should be adjusted in io_timeout_fn(), because the current timeout req
will consumes a slot in the cq_ring and cq_tail pointer will be
increased, otherwise other timeout reqs may return in advance without
waiting for enough wait_nr.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are cases where it isn't always safe to block for submission,
even if the caller asked to wait for events as well. Revert the
previous optimization of doing that.
This reverts two commits:
bf7ec93c64c576666863
Fixes: c576666863 ("io_uring: optimize submit_and_wait API")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=rvkw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Keith that address deadlocks, double resets,
memory leaks, and other regression.
- Fixup elv_support_iosched() for bio based devices (Damien)
- Fixup for the ahci PCS quirk (Dan)
- Socket O_NONBLOCK handling fix for io_uring (me)
- Timeout sequence io_uring fixes (yangerkun)
- MD warning fix for parameter default_layout (Song)
- blkcg activation fixes (Tejun)
- blk-rq-qos node deletion fix (Tejun)
* tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block:
nvme-pci: Set the prp2 correctly when using more than 4k page
io_uring: fix logic error in io_timeout
io_uring: fix up O_NONBLOCK handling for sockets
md/raid0: fix warning message for parameter default_layout
libata/ahci: Fix PCS quirk application
blk-rq-qos: fix first node deletion of rq_qos_del()
blkcg: Fix multiple bugs in blkcg_activate_policy()
io_uring: consider the overflow of sequence for timeout req
nvme-tcp: fix possible leakage during error flow
nvmet-loop: fix possible leakage during error flow
block: Fix elv_support_iosched()
nvme-tcp: Initialize sk->sk_ll_usec only with NET_RX_BUSY_POLL
nvme: Wait for reset state when required
nvme: Prevent resets during paused controller state
nvme: Restart request timers in resetting state
nvme: Remove ADMIN_ONLY state
nvme-pci: Free tagset if no IO queues
nvme: retain split access workaround for capability reads
nvme: fix possible deadlock when nvme_update_formats fails
If ctx->cached_sq_head < nxt_sq_head, we should add UINT_MAX to tmp, not
tmp_nxt.
Fixes: 5da0fb1ab3 ("io_uring: consider the overflow of sequence for timeout req")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've got two issues with the non-regular file handling for non-blocking
IO:
1) We don't want to re-do a short read in full for a non-regular file,
as we can't just read the data again.
2) For non-regular files that don't support non-blocking IO attempts,
we need to punt to async context even if the file is opened as
non-blocking. Otherwise the caller always gets -EAGAIN.
Add two new request flags to handle these cases. One is just a cache
of the inode S_ISREG() status, the other tells io_uring that we always
need to punt this request to async context, even if REQ_F_NOWAIT is set.
Cc: stable@vger.kernel.org
Reported-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Tested-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we recalculate the sequence of timeout with 'req->sequence =
ctx->cached_sq_head + count - 1', judge the right place to insert
for timeout_list by compare the number of request we still expected for
completion. But we have not consider about the situation of overflow:
1. ctx->cached_sq_head + count - 1 may overflow. And a bigger count for
the new timeout req can have a small req->sequence.
2. cached_sq_head of now may overflow compare with before req. And it
will lead the timeout req with small req->sequence.
This overflow will lead to the misorder of timeout_list, which can lead
to the wrong order of the completion of timeout_list. Fix it by reuse
req->submit.sequence to store the count, and change the logic of
inserting sort in io_timeout.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=PUeL
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191012' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Single small fix for a regression in the sequence logic for linked
commands"
* tag 'for-linus-20191012' of git://git.kernel.dk/linux-block:
io_uring: fix sequence logic for timeout requests
We have two ways a request can be deferred:
1) It's a regular request that depends on another one
2) It's a timeout that tracks completions
We have a shared helper to determine whether to defer, and that
attempts to make the right decision based on the request. But we
only have some of this information in the caller. Un-share the
two timeout/defer helpers so the caller can use the right one.
Fixes: 5262f56798 ("io_uring: IORING_OP_TIMEOUT support")
Reported-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We should not remove the workqueue, we just need to ensure that the
workqueues are synced. The workqueues are torn down on ctx removal.
Cc: stable@vger.kernel.org
Fixes: 6b06314c47 ("io_uring: add file set registration")
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Any changes interesting to tasks waiting in io_cqring_wait() are
commited with io_cqring_ev_posted(). However, io_ring_drop_ctx_refs()
also tries to do that but with no reason, that means spurious wakeups
every io_free_req() and io_uring_enter().
Just use percpu_ref_put() instead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=vKVl
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Mandate timespec64 for the io_uring timeout ABI (Arnd)
- Set of NVMe changes via Sagi:
- controller removal race fix from Balbir
- quirk additions from Gabriel and Jian-Hong
- nvme-pci power state save fix from Mario
- Add 64bit user commands (for 64bit registers) from Marta
- nvme-rdma/nvme-tcp fixes from Max, Mark and Me
- Minor cleanups and nits from James, Dan and John
- Two s390 dasd fixes (Jan, Stefan)
- Have loop change block size in DIO mode (Martijn)
- paride pg header ifdef guard (Masahiro)
- Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned
devices and suboptimal performance on others (Ming)
* tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits)
block: sed-opal: fix sparse warning: convert __be64 data
block: sed-opal: fix sparse warning: obsolete array init.
block: pg: add header include guard
Revert "s390/dasd: Add discard support for ESE volumes"
s390/dasd: Fix error handling during online processing
io_uring: use __kernel_timespec in timeout ABI
loop: change queue block size to match when using DIO
blk-mq: apply normal plugging for HDD
blk-mq: honor IO scheduler for multiqueue devices
nvme-rdma: fix possible use-after-free in connect timeout
nvme: Move ctrl sqsize to generic space
nvme: Add ctrl attributes for queue_count and sqsize
nvme: allow 64-bit results in passthru commands
nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T
nvmet-tcp: remove superflous check on request sgl
Added QUIRKs for ADATA XPG SX8200 Pro 512GB
nvme-rdma: Fix max_hw_sectors calculation
nvme: fix an error code in nvme_init_subsystem()
nvme-pci: Save PCI state before putting drive into deepest state
nvme-tcp: fix wrong stop condition in io_work
...
All system calls use struct __kernel_timespec instead of the old struct
timespec, but this one was just added with the old-style ABI. Change it
now to enforce the use of __kernel_timespec, avoiding ABI confusion and
the need for compat handlers on 32-bit architectures.
Any user space caller will have to use __kernel_timespec now, but this
is unambiguous and works for any C library regardless of the time_t
definition. A nicer way to specify the timeout would have been a less
ambiguous 64-bit nanosecond value, but I suppose it's too late now to
change that as this would impact both 32-bit and 64-bit users.
Fixes: 5262f56798 ("io_uring: IORING_OP_TIMEOUT support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=DEYH
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/io_uring-2019-09-27' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
"Just two things in here:
- Improvement to the io_uring CQ ring wakeup for batched IO (me)
- Fix wrong comparison in poll handling (yangerkun)
I realize the first one is a little late in the game, but it felt
pointless to hold it off until the next release. Went through various
testing and reviews with Pavel and peterz"
* tag 'for-5.4/io_uring-2019-09-27' of git://git.kernel.dk/linux-block:
io_uring: make CQ ring wakeups be more efficient
io_uring: compare cached_cq_tail with cq.head in_io_uring_poll
For batched IO, it's not uncommon for waiters to ask for more than 1
IO to complete before being woken up. This is a problem with
wait_event() since tasks will get woken for every IO that completes,
re-check condition, then go back to sleep. For batch counts on the
order of what you do for high IOPS, that can result in 10s of extra
wakeups for the waiting task.
Add a private wake function that checks for the wake up count criteria
being met before calling autoremove_wake_function(). Pavel reports that
one test case he has runs 40% faster with proper batching of wakeups.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=/w5G
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/io_uring-2019-09-24' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
"A collection of later fixes and additions, that weren't quite ready
for pushing out with the initial pull request.
This contains:
- Fix potential use-after-free of shadow requests (Jackie)
- Fix potential OOM crash in request allocation (Jackie)
- kmalloc+memcpy -> kmemdup cleanup (Jackie)
- Fix poll crash regression (me)
- Fix SQ thread not being nice and giving up CPU for !PREEMPT (me)
- Add support for timeouts, making it easier to do epoll_wait()
conversions, for instance (me)
- Ensure io_uring works without f_ops->read_iter() and
f_ops->write_iter() (me)"
* tag 'for-5.4/io_uring-2019-09-24' of git://git.kernel.dk/linux-block:
io_uring: correctly handle non ->{read,write}_iter() file_operations
io_uring: IORING_OP_TIMEOUT support
io_uring: use cond_resched() in sqthread
io_uring: fix potential crash issue due to io_get_req failure
io_uring: ensure poll commands clear ->sqe
io_uring: fix use-after-free of shadow_req
io_uring: use kmemdup instead of kmalloc and memcpy
Patch series "Make working with compound pages easier", v2.
These three patches add three helpers and convert the appropriate
places to use them.
This patch (of 3):
It's unnecessarily hard to find out the size of a potentially huge page.
Replace 'PAGE_SIZE << compound_order(page)' with page_size(page).
Link: http://lkml.kernel.org/r/20190721104612.19120-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After 75b28af("io_uring: allocate the two rings together"), we compare
sq.head with cached_cq_tail to determine does there any cq invalid.
Actually, we should use cq.head.
Fixes: 75b28affdd ("io_uring: allocate the two rings together")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we just -EINVAL a read or write to an fd that isn't backed
by ->read_iter() or ->write_iter(). But we can handle them just fine,
as long as we punt fo async context first.
Implement a simple loop function for doing ->read() or ->write()
instead, and ensure we call it appropriately.
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's been a few requests for functionality similar to io_getevents()
and epoll_wait(), where the user can specify a timeout for waiting on
events. I deliberately did not add support for this through the system
call initially to avoid overloading the args, but I can see that the use
cases for this are valid.
This adds support for IORING_OP_TIMEOUT. If a user wants to get woken
when waiting for events, simply submit one of these timeout commands
with your wait call (or before). This ensures that the application
sleeping on the CQ ring waiting for events will get woken. The timeout
command is passed in as a pointer to a struct timespec. Timeouts are
relative. The timeout command also includes a way to auto-cancel after
N events has passed.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If preempt isn't enabled in the kernel, we can run into hang issues with
sqthread submissions. Use cond_resched() to play nice instead of
cpu_relax(), if we end up starting the loop and not having any events
pending for submissions.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sometimes io_get_req will return a NUL, then we need to do the
correct error handling, otherwise it will cause the kernel null
pointer exception.
Fixes: 4fe2c96315 ("io_uring: add support for link with drain")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we end up getting woken in poll (due to a signal), then we may need
to punt the poll request to an async worker. When we do that, we look up
the list to queue at, deferefencing req->submit.sqe, however that is
only set for requests we initially decided to queue async.
This fixes a crash with poll command usage and wakeups that need to punt
to async context.
Fixes: 54a91f3bb9 ("io_uring: limit parallelism of buffered writes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a potential dangling pointer problem. we never clean
shadow_req, if there are multiple link lists in this series of
sqes, then the shadow_req will not reallocate, and continue to
use the last one. but in the previous, his memory has been
released, thus forming a dangling pointer. let's clean up him
and make sure that every new link list can reapply for a new
shadow_req.
Fixes: 4fe2c96315 ("io_uring: add support for link with drain")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some workloads can require far more than 4K oustanding entries. For
example memcached can have ~300K sockets over ~40 cores. Bumping the max
to 32K seems to work pretty well.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe