Commit Graph

340 Commits

Author SHA1 Message Date
Stephane Eranian fad1f1e7de perf script: Remove extraneous newline in perf_sample__fprintf_regs()
When printing iregs, there was a double newline printed because
perf_sample__fprintf_regs() was printing its own and then at the end of
all fields, perf script was adding one.  This was causing blank line in
the output:

Before:

  $ perf script -Fip,iregs
             401b8d ABI:2    DX:0x100    SI:0x4a8340    DI:0x4a9340

             401b8d ABI:2    DX:0x100    SI:0x4a9340    DI:0x4a8340

             401b8d ABI:2    DX:0x100    SI:0x4a8340    DI:0x4a9340

             401b8d ABI:2    DX:0x100    SI:0x4a9340    DI:0x4a8340

After:

  $ perf script -Fip,iregs
             401b8d ABI:2    DX:0x100    SI:0x4a8340    DI:0x4a9340
             401b8d ABI:2    DX:0x100    SI:0x4a9340    DI:0x4a8340
             401b8d ABI:2    DX:0x100    SI:0x4a8340    DI:0x4a9340

Committer testing:

First we need to figure out how to request that registers be recorded,
so we use:

  # perf record -h reg

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -I, --intr-regs[=<any register>]
                            sample selected machine registers on interrupt, use '-I?' to list register names
          --buildid-all     Record build-id of all DSOs regardless of hits
          --user-regs[=<any register>]
                            sample selected machine registers on interrupt, use '--user-regs=?' to list register names

  #

Ok, now lets ask for them all:

  # perf record -a --intr-regs --user-regs sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 4.105 MB perf.data (2760 samples) ]
  #

Lets look at the first 6 output lines:

  # perf script -Fip,iregs | head -6
   ffffffff8a06f2f4 ABI:2    AX:0xffffd168fee0a980    BX:0xffff8a23b087f000    CX:0xfffeb69aaeb25d73    DX:0xffff8a253e8310f0    SI:0xfffffff9bafe7359    DI:0xffffb1690204fb10    BP:0xffffd168fee0a950    SP:0xffffb1690204fb88    IP:0xffffffff8a06f2f4 FLAGS:0x4e    CS:0x10    SS:0x18    R8:0x1495f0a91129a    R9:0xffff8a23b087f000   R10:0x1   R11:0xffffffff   R12:0x0   R13:0xffff8a253e827e00   R14:0xffffd168fee0aa5c   R15:0xffffd168fee0a980

   ffffffff8a06f2f4 ABI:2    AX:0x0    BX:0xffffd168fee0a950    CX:0x5684cc1118491900    DX:0x0    SI:0xffffd168fee0a9d0    DI:0x202    BP:0xffffb1690204fd70    SP:0xffffb1690204fd20    IP:0xffffffff8a06f2f4 FLAGS:0x24e    CS:0x10    SS:0x18    R8:0x0    R9:0xffffd168fee0a9d0   R10:0x1   R11:0xffffffff   R12:0xffffffff8a23e480   R13:0xffff8a23b087f240   R14:0xffff8a23b087f000   R15:0xffffd168fee0a950

   ffffffff8a06f2f4 ABI:2    AX:0x0    BX:0x0    CX:0x7f25f334335b    DX:0x0    SI:0x2400    DI:0x4    BP:0x7fff5f264570    SP:0x7fff5f264538    IP:0xffffffff8a06f2f4 FLAGS:0x24e    CS:0x10    SS:0x2b    R8:0x0    R9:0x2312d20   R10:0x0   R11:0x246   R12:0x22cc0e0   R13:0x0   R14:0x0   R15:0x22d0780

  #

Reproduced, apply the patch and:

[root@five ~]# perf script -Fip,iregs | head -6
 ffffffff8a06f2f4 ABI:2    AX:0xffffd168fee0a980    BX:0xffff8a23b087f000    CX:0xfffeb69aaeb25d73    DX:0xffff8a253e8310f0    SI:0xfffffff9bafe7359    DI:0xffffb1690204fb10    BP:0xffffd168fee0a950    SP:0xffffb1690204fb88    IP:0xffffffff8a06f2f4 FLAGS:0x4e    CS:0x10    SS:0x18    R8:0x1495f0a91129a    R9:0xffff8a23b087f000   R10:0x1   R11:0xffffffff   R12:0x0   R13:0xffff8a253e827e00   R14:0xffffd168fee0aa5c   R15:0xffffd168fee0a980
 ffffffff8a06f2f4 ABI:2    AX:0x0    BX:0xffffd168fee0a950    CX:0x5684cc1118491900    DX:0x0    SI:0xffffd168fee0a9d0    DI:0x202    BP:0xffffb1690204fd70    SP:0xffffb1690204fd20    IP:0xffffffff8a06f2f4 FLAGS:0x24e    CS:0x10    SS:0x18    R8:0x0    R9:0xffffd168fee0a9d0   R10:0x1   R11:0xffffffff   R12:0xffffffff8a23e480   R13:0xffff8a23b087f240   R14:0xffff8a23b087f000   R15:0xffffd168fee0a950
 ffffffff8a06f2f4 ABI:2    AX:0x0    BX:0x0    CX:0x7f25f334335b    DX:0x0    SI:0x2400    DI:0x4    BP:0x7fff5f264570    SP:0x7fff5f264538    IP:0xffffffff8a06f2f4 FLAGS:0x24e    CS:0x10    SS:0x2b    R8:0x0    R9:0x2312d20   R10:0x0   R11:0x246   R12:0x22cc0e0   R13:0x0   R14:0x0   R15:0x22d0780
 ffffffff8a24074b ABI:2    AX:0xcb    BX:0xcb    CX:0x0    DX:0x0    SI:0xffffb1690204ff58    DI:0xcb    BP:0xffffb1690204ff58    SP:0xffffb1690204ff40    IP:0xffffffff8a24074b FLAGS:0x24e    CS:0x10    SS:0x18    R8:0x0    R9:0x0   R10:0x0   R11:0x0   R12:0x0   R13:0x0   R14:0x0   R15:0x0
 ffffffff8a310600 ABI:2    AX:0x0    BX:0xffffffff8b8c39a0    CX:0x0    DX:0xffff8a2503890300    SI:0xffffb1690204ff20    DI:0xffff8a23e4080000    BP:0xffff8a23e4080000    SP:0xffffb1690204fec0    IP:0xffffffff8a310600 FLAGS:0x28e    CS:0x10    SS:0x18    R8:0x0    R9:0x0   R10:0x0   R11:0x0   R12:0xffffffffffffffea   R13:0xffff8a23e4080020   R14:0x0   R15:0x0
 ffffffff8a11b688 ABI:2    AX:0x0    BX:0xffff8a237b7c8800    CX:0xffffb1690204fae0    DX:0x78    SI:0xffff8a237b7c8800    DI:0xffffb1690204fa10    BP:0xffffb1690204fb00    SP:0xffffb1690204fa00    IP:0xffffffff8a11b688 FLAGS:0x8a    CS:0x10    SS:0x18    R8:0x1495f0a917eba    R9:0xffffd168fde19a48   R10:0xffffb1690204fd98   R11:0xffff8a253e82afb0   R12:0xffff8a237b7c8800   R13:0xffffb1690204fb00   R14:0x0   R15:0xffff8a237b7c8800
[root@five ~]#

To see it more clearly, lets get just two of those registers by sample:

  # perf record -a --intr-regs=ax,bx --user-regs=cx,dx sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 3.502 MB perf.data (1653 samples) ]
  #

Extra info, lets see what gets setup in that 'struct perf_event_attr':

  # perf evlist -v
  cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|REGS_USER|REGS_INTR, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 2, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, sample_regs_user: 0xc, sample_regs_intr: 0x3
  #

Cook, some PERF_SAMPLE_REGS_USER|PERF_SAMPLE_REGS_INTR +
attr.sample_regs_user and attr.sample_regs_intr register masks, now lets
see if those newlines are gone in a more compact fashion:

  # perf script -Fip,iregs,uregs
   ffffffff8a56df78 ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a56df78 ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a56df78 ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a56df78 ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a56df78 ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a56df78 ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a29b78d ABI:2    AX:0x2a20ffcd6000    BX:0x2ec7d9000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
  #

And where was that?

  # perf script -Fip,iregs,uregs,sym,dso
   ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2    AX:0xffff8a25137b6028    BX:0xffff8a2502f18000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
   ffffffff8a29b78d __vma_link_rb (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2    AX:0x2a20ffcd6000    BX:0x2ec7d9000  ABI:2    CX:0x7f204460e49b    DX:0xf42920
  #

Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200418231908.152212-1-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-30 10:48:32 -03:00
Kan Liang 680d125cd5 perf script: Add option to enable the LBR stitching approach
With the LBR stitching approach, the reconstructed LBR call stack can
break the HW limitation. However, it may reconstruct invalid call stacks
in some cases, e.g. exception handing such as setjmp/longjmp.  Also, it
may impact the processing time especially when the number of samples
with stitched LBRs are huge.

Add an option to enable the approach.

Committer testing:

Using the same perf.data as with the latest cset committer testing
section:

  $ perf script --stitch-lbr
  <SNIP>
  tchain_edit 11131 15164.984292:     437491 cycles:u:
                    401106 f43+0x0 (/wb/tchain_edit)
                    40114c f42+0x18 (/wb/tchain_edit)
                    401172 f41+0xe (/wb/tchain_edit)
                    401194 f40+0x0 (/wb/tchain_edit)
                    40119b f39+0x0 (/wb/tchain_edit)
                    4011a2 f38+0x0 (/wb/tchain_edit)
                    4011a9 f37+0x0 (/wb/tchain_edit)
                    4011b0 f36+0x0 (/wb/tchain_edit)
                    4011b7 f35+0x0 (/wb/tchain_edit)
                    4011be f34+0x0 (/wb/tchain_edit)
                    4011c5 f33+0x0 (/wb/tchain_edit)
                    4011cc f32+0x0 (/wb/tchain_edit)
                    401207 f31+0x34 (/wb/tchain_edit)
                    401212 f30+0x0 (/wb/tchain_edit)
                    401219 f29+0x0 (/wb/tchain_edit)
                    401220 f28+0x0 (/wb/tchain_edit)
                    401227 f27+0x0 (/wb/tchain_edit)
                    40122e f26+0x0 (/wb/tchain_edit)
                    401235 f25+0x0 (/wb/tchain_edit)
                    40123c f24+0x0 (/wb/tchain_edit)
                    401243 f23+0x0 (/wb/tchain_edit)
                    40124a f22+0x0 (/wb/tchain_edit)
                    401251 f21+0x0 (/wb/tchain_edit)
                    401258 f20+0x0 (/wb/tchain_edit)
                    40125f f19+0x0 (/wb/tchain_edit)
                    401266 f18+0x0 (/wb/tchain_edit)
                    40126d f17+0x0 (/wb/tchain_edit)
                    401274 f16+0x0 (/wb/tchain_edit)
                    40127b f15+0x0 (/wb/tchain_edit)
                    401282 f14+0x0 (/wb/tchain_edit)
                    401289 f13+0x0 (/wb/tchain_edit)
                    401290 f12+0x0 (/wb/tchain_edit)
                    401297 f11+0x0 (/wb/tchain_edit)
                    40129e f10+0x0 (/wb/tchain_edit)
                    4012a5 f9+0x0 (/wb/tchain_edit)
                    4012ac f8+0x0 (/wb/tchain_edit)
                    4012b3 f7+0x0 (/wb/tchain_edit)
                    4012ba f6+0x0 (/wb/tchain_edit)
                    4012c1 f5+0x0 (/wb/tchain_edit)
                    4012c8 f4+0x0 (/wb/tchain_edit)
                    4012cf f3+0x0 (/wb/tchain_edit)
                    4012d6 f2+0x0 (/wb/tchain_edit)
                    4012dd f1+0x0 (/wb/tchain_edit)
                    4012e4 main+0x0 (/wb/tchain_edit)
              7f41a5016f41 __libc_start_main+0xf1 (/usr/lib64/libc-2.29.so)
  <SNIP>
  $

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-15-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-18 09:05:01 -03:00
Adrian Hunter 1c5c25b3fd perf auxtrace: Add an option to synthesize callchains for regular events
Currently, callchains can be synthesized only for synthesized events. Add
an itrace option to synthesize callchains for regular events.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-16 12:19:15 -03:00
Adrian Hunter 1a2725f3ee perf script: Simplify auxiliary event printing functions
This simplifies the print functions for the following perf script
options:

	--show-task-events
	--show-namespace-events
	--show-cgroup-events
	--show-mmap-events
	--show-switch-events
	--show-lost-events
	--show-bpf-events

Example:
	# perf record --switch-events -a -e cycles -c 10000 sleep 1
 Before:
	# perf script --show-task-events --show-namespace-events --show-cgroup-events --show-mmap-events --show-switch-events --show-lost-events --show-bpf-events > out-before.txt
 After:
	# perf script --show-task-events --show-namespace-events --show-cgroup-events --show-mmap-events --show-switch-events --show-lost-events --show-bpf-events > out-after.txt
	# diff -s out-before.txt out-after.txt
	Files out-before.txt and out-after.tx are identical

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200402141548.21283-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-16 12:19:12 -03:00
Andreas Gerstmayr 27486a85cb perf script: Fix invalid read of directory entry after closedir()
closedir(lang_dir) frees the memory of script_dirent->d_name, which
gets accessed in the next line in a call to scnprintf().

Valgrind report:

  Invalid read of size 1
  ==413557==    at 0x483CBE6: strlen (vg_replace_strmem.c:461)
  ==413557==    by 0x4DD45FD: __vfprintf_internal (vfprintf-internal.c:1688)
  ==413557==    by 0x4DE6679: __vsnprintf_internal (vsnprintf.c:114)
  ==413557==    by 0x53A037: vsnprintf (stdio2.h:80)
  ==413557==    by 0x53A037: scnprintf (vsprintf.c:21)
  ==413557==    by 0x435202: get_script_path (builtin-script.c:3223)
  ==413557==  Address 0x52e7313 is 1,139 bytes inside a block of size 32,816 free'd
  ==413557==    at 0x483AA0C: free (vg_replace_malloc.c:540)
  ==413557==    by 0x4E303C0: closedir (closedir.c:50)
  ==413557==    by 0x4351DC: get_script_path (builtin-script.c:3222)

Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200402124337.419456-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03 10:03:18 -03:00
Namhyung Kim 160d4af97b perf script: Add --show-cgroup-events option
The --show-cgroup-events option is to print CGROUP events in the
output like others.

Committer testing:

  [root@seventh ~]# perf record --all-cgroups --namespaces /wb/cgtest
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.039 MB perf.data (487 samples) ]
  [root@seventh ~]# perf script --show-cgroup-events | grep PERF_RECORD_CGROUP -B2 -A2
           swapper     0     0.000000: PERF_RECORD_CGROUP cgroup: 1 /
              perf 12145 11200.440730:          1 cycles:  ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
              perf 12145 11200.440733:          1 cycles:  ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
  --
            cgtest 12145 11200.440739:     193472 cycles:  ffffffffb90f6fbc commit_creds+0x1fc (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
            cgtest 12145 11200.440790:    2691608 cycles:      7fa2cb43019b _dl_sysdep_start+0x7cb (/usr/lib64/ld-2.29.so)
            cgtest 12145 11200.440962: PERF_RECORD_CGROUP cgroup: 83 /sub
            cgtest 12147 11200.441054:          1 cycles:  ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
            cgtest 12147 11200.441057:          1 cycles:  ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
  --
            cgtest 12148 11200.441103:      10227 cycles:  ffffffffb9a0153d end_repeat_nmi+0x48 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
            cgtest 12148 11200.441106:     273295 cycles:  ffffffffb99ecbc7 copy_page+0x7 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
            cgtest 12147 11200.441133: PERF_RECORD_CGROUP cgroup: 88 /sub/cgrp1
            cgtest 12147 11200.441143:    2788845 cycles:  ffffffffb94676c2 security_genfs_sid+0x102 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
            cgtest 12148 11200.441162: PERF_RECORD_CGROUP cgroup: 93 /sub/cgrp2
            cgtest 12148 11200.441182:    2669546 cycles:            401020 _init+0x20 (/wb/cgtest)
            cgtest 12149 11200.441247:          1 cycles:  ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux)
  [root@seventh ~]#

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03 09:37:55 -03:00
Hagen Paul Pfeifer 26567ed79d perf script: Introduce --deltatime option
For some kind of analysis a deltatime output is more human friendly and
reduce the cognitive load for further analysis.

The following output demonstrate the new option "deltatime": calculate
the time difference in relation to the previous event.

  $ perf script --deltatime
  test  2525 [001]     0.000000:            sdt_libev:ev_add: (5635e72a5ebd)
  test  2525 [001]     0.000091:  sdt_libev:epoll_wait_enter: (5635e72a76a9)
  test  2525 [001]     1.000051: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1
  test  2525 [001]     0.000685:            sdt_libev:ev_add: (5635e72a5ebd)
  test  2525 [001]     0.000048:  sdt_libev:epoll_wait_enter: (5635e72a76a9)
  test  2525 [001]     1.000104: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1
  test  2525 [001]     0.003895:  sdt_libev:epoll_wait_enter: (5635e72a76a9)
  test  2525 [001]     0.996034: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1
  test  2525 [001]     0.000058:  sdt_libev:epoll_wait_enter: (5635e72a76a9)
  test  2525 [001]     1.000004: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1
  test  2525 [001]     0.000064:  sdt_libev:epoll_wait_enter: (5635e72a76a9)
  test  2525 [001]     0.999934: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1
  test  2525 [001]     0.000056:  sdt_libev:epoll_wait_enter: (5635e72a76a9)
  test  2525 [001]     0.999930: sdt_libev:epoll_wait_return: (5635e72a772e) arg1=1

Committer testing:

So go from default output to --reltime and then this new --deltatime, to
contrast the various timestamp presentation modes for a random perf.data file I
had laying around:

  [root@five ~]# perf script --reltime | head
     perf 442394 [000]     0.000000:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]     0.000002:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]     0.000004:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]     0.000006:  128 cycles: ffffffff972415a1 perf_event_update_userpage+0x1 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]     0.000009: 2597 cycles: ffffffff97463785 cap_task_setscheduler+0x5 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]     0.000036:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]     0.000038:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]     0.000040:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]     0.000041:  224 cycles: ffffffff9700a53a perf_ibs_handle_irq+0x1da (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]     0.000044: 4439 cycles: ffffffff97120d85 put_prev_entity+0x45 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
  [root@five ~]# perf script --deltatime | head
     perf 442394 [000]     0.000000:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]     0.000002:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]     0.000001:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]     0.000001:  128 cycles: ffffffff972415a1 perf_event_update_userpage+0x1 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]     0.000002: 2597 cycles: ffffffff97463785 cap_task_setscheduler+0x5 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]     0.000027:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]     0.000002:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]     0.000001:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]     0.000001:  224 cycles: ffffffff9700a53a perf_ibs_handle_irq+0x1da (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]     0.000002: 4439 cycles: ffffffff97120d85 put_prev_entity+0x45 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
  [root@five ~]# perf script | head
     perf 442394 [000]  7600.157861:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]  7600.157864:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]  7600.157866:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]  7600.157867:  128 cycles: ffffffff972415a1 perf_event_update_userpage+0x1 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [000]  7600.157870: 2597 cycles: ffffffff97463785 cap_task_setscheduler+0x5 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]  7600.157897:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]  7600.157900:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]  7600.157901:   16 cycles: ffffffff9706e544 native_write_msr+0x4 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]  7600.157903:  224 cycles: ffffffff9700a53a perf_ibs_handle_irq+0x1da (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
     perf 442394 [001]  7600.157906: 4439 cycles: ffffffff97120d85 put_prev_entity+0x45 (/usr/lib/debug/lib/modules/5.5.10-200.fc31.x86_64/vmlinux)
  [root@five ~]#

Andi suggested we better implement it as a new field, i.e. -F deltatime, like:

  [root@five ~]# perf script -F deltatime
  Invalid field requested.

   Usage: perf script [<options>]
      or: perf script [<options>] record <script> [<record-options>] <command>
      or: perf script [<options>] report <script> [script-args]
      or: perf script [<options>] <script> [<record-options>] <command>
      or: perf script [<options>] <top-script> [script-args]

      -F, --fields <str>    comma separated output fields prepend with 'type:'. +field to add and -field to remove.Valid types: hw,sw,trace,raw,synth. Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,srcline,period,iregs,uregs,brstack,brstacksym,flags,bpf-output,brstackinsn,brstackoff,callindent,insn,insnlen,synth,phys_addr,metric,misc,ipc
  [root@five ~]#

I.e. we have -F for maximum flexibility:

  [root@five ~]# perf script -F comm,pid,cpu,time | head
            perf 442394 [000]  7600.157861:
            perf 442394 [000]  7600.157864:
            perf 442394 [000]  7600.157866:
            perf 442394 [000]  7600.157867:
            perf 442394 [000]  7600.157870:
            perf 442394 [001]  7600.157897:
            perf 442394 [001]  7600.157900:
            perf 442394 [001]  7600.157901:
            perf 442394 [001]  7600.157903:
            perf 442394 [001]  7600.157906:
  [root@five ~]#

But since we already have --reltime, having --deltatime, documented one after
the other is sensible.

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20200204173709.489161-1-hagen@jauu.net
[ Added 'perf script' man page entry for --deltatime ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-27 10:38:47 -03:00
Kan Liang 42bbabed09 perf tools: Add hw_idx in struct branch_stack
The low level index of raw branch records for the most recent branch can
be recorded in a sample with PERF_SAMPLE_BRANCH_HW_INDEX
branch_sample_type. Extend struct branch_stack to support it.

However, if the PERF_SAMPLE_BRANCH_HW_INDEX is not applied, only nr and
entries[] will be output by kernel. The pointer of entries[] could be
wrong, since the output format is different with new struct
branch_stack.  Add a variable no_hw_idx in struct perf_sample to
indicate whether the hw_idx is output.  Add get_branch_entry() to return
corresponding pointer of entries[0].

To make dummy branch sample consistent as new branch sample, add hw_idx
in struct dummy_branch_stack for cs-etm and intel-pt.

Apply the new struct branch_stack for synthetic events as well.

Extend test case sample-parsing to support new struct branch_stack.

Committer notes:

Renamed get_branch_entries() to perf_sample__branch_entries() to have
proper namespacing and pave the way for this to be moved to libperf,
eventually.

Add 'static' to that inline as it is in a header.

Add 'hw_idx' to 'struct dummy_branch_stack' in cs-etm.c to fix the build
on arm64.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200228163011.19358-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-09 21:42:53 -03:00
Adrian Hunter 5172672da0 perf script: Fix invalid LBR/binary mismatch error
The 'len' returned by grab_bb() includes an extra MAXINSN bytes to allow
for the last instruction, so the the final 'offs' will not be 'len'.
Fix the error condition logic accordingly.

Before:

  $ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
  [ perf record: Woken up 19 times to write data ]
  [ perf record: Captured and wrote 2.274 MB perf.data ]
  $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
            grep 13759 [002]  8091.310257:       1862                                        instructions:uH:      5641d58069eb bmexec+0x86b (/bin/grep)
        bmexec+2485:
        00005641d5806b35                        jnz 0x5641d5806bd0              # MISPRED
        00005641d5806bd0                        movzxb  (%r13,%rdx,1), %eax
        00005641d5806bd6                        add %rdi, %rax
        00005641d5806bd9                        movzxb  -0x1(%rax), %edx
        00005641d5806bdd                        cmp %rax, %r14
        00005641d5806be0                        jnb 0x5641d58069c0              # MISPRED
        mismatch of LBR data and executable
        00005641d58069c0                        movzxb  (%r13,%rdx,1), %edi

After:

  $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
            grep 13759 [002]  8091.310257:       1862                                        instructions:uH:      5641d58069eb bmexec+0x86b (/bin/grep)
        bmexec+2485:
        00005641d5806b35                        jnz 0x5641d5806bd0              # MISPRED
        00005641d5806bd0                        movzxb  (%r13,%rdx,1), %eax
        00005641d5806bd6                        add %rdi, %rax
        00005641d5806bd9                        movzxb  -0x1(%rax), %edx
        00005641d5806bdd                        cmp %rax, %r14
        00005641d5806be0                        jnb 0x5641d58069c0              # MISPRED
        00005641d58069c0                        movzxb  (%r13,%rdx,1), %edi
        00005641d58069c6                        add %rax, %rdi

Fixes: e98df280bc ("perf script brstackinsn: Fix recovery from LBR/binary mismatch")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191127095631.15663-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-28 08:08:38 -03:00
Adrian Hunter 0cd032d3b5 perf script: Fix brstackinsn for AUXTRACE
brstackinsn must be allowed to be set by the user when AUX area data has
been captured because, in that case, the branch stack might be
synthesized on the fly. This fixes the following error:

Before:

  $ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
  [ perf record: Woken up 19 times to write data ]
  [ perf record: Captured and wrote 2.274 MB perf.data ]
  $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
  Display of branch stack assembler requested, but non all-branch filter set
  Hint: run 'perf record -b ...'

After:

  $ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
  [ perf record: Woken up 19 times to write data ]
  [ perf record: Captured and wrote 2.274 MB perf.data ]
  $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
            grep 13759 [002]  8091.310257:       1862                                        instructions:uH:      5641d58069eb bmexec+0x86b (/bin/grep)
        bmexec+2485:
        00005641d5806b35                        jnz 0x5641d5806bd0              # MISPRED
        00005641d5806bd0                        movzxb  (%r13,%rdx,1), %eax
        00005641d5806bd6                        add %rdi, %rax
        00005641d5806bd9                        movzxb  -0x1(%rax), %edx
        00005641d5806bdd                        cmp %rax, %r14
        00005641d5806be0                        jnb 0x5641d58069c0              # MISPRED
        mismatch of LBR data and executable
        00005641d58069c0                        movzxb  (%r13,%rdx,1), %edi

Fixes: 48d02a1d5c ("perf script: Add 'brstackinsn' for branch stacks")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191127095322.15417-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-28 08:08:38 -03:00
Arnaldo Carvalho de Melo 540a63ea30 perf script: Move map__fprintf_srccode() to near its only user
No need to have it elsewhere.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8cw846pudpxo0xdkvi9qnvrh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26 11:07:45 -03:00
Andi Kleen b3509b6ed7 perf script: Fix --reltime with --time
My earlier patch to just enable --reltime with --time was a little too
optimistic.  The --time parsing would accept absolute time, which is
very confusing to the user.

Support relative time in --time parsing too. This only works with recent
perf record that records the first sample time. Otherwise we error out.

Fixes: 3714437d3f ("perf script: Allow --time with --reltime")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191011182140.8353-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-15 08:36:22 -03:00
Andi Kleen 3714437d3f perf script: Allow --time with --reltime
The original --reltime patch forbid --time with --reltime.

But it turns out --time doesn't really care about --reltime, because the
relative time is only used at final output, while the time filtering
always works earlier on absolute time.

So just remove the check and allow combining the two options.

Fixes: 90b10f47c0 ("perf script: Support relative time")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191002164642.1719-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-07 12:22:18 -03:00
Andi Kleen e98df280bc perf script brstackinsn: Fix recovery from LBR/binary mismatch
When the LBR data and the instructions in a binary do not match the loop
printing instructions could get confused and print a long stream of
bogus <bad> instructions.

The problem was that if the instruction decoder cannot decode an
instruction it ilen wasn't initialized, so the loop going through the
basic block would continue with the previous value.

Harden the code to avoid such problems:

- Make sure ilen is always freshly initialized and is 0 for bad
  instructions.

- Do not overrun the code buffer while printing instructions

- Print a warning message if the final jump is not on an instruction
  boundary.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30 17:29:52 -03:00
Arnaldo Carvalho de Melo ca1252779f perf evsel: Introduce evsel_fprintf.h
We already had evsel_fprintf.c, add its counterpart, so that we can
reduce evsel.h a bit more.

We needed a new perf_event_attr_fprintf.c file so as to have a separate
object to link with the python binding in tools/perf/util/python-ext-sources
and not drag symbol_conf, etc into the python binding.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-06bdmt1062d9unzgqmxwlv88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 16:26:34 -03:00
Arnaldo Carvalho de Melo 9620bc361a perf evsel: Remove need for symbol_conf in evsel_fprintf.c
So that we an later link it to the python binding without having to
drag the symbol object files.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8823tveyasocnuoelq4qopwf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 15:06:59 -03:00
Jiri Olsa 515dbe48f6 libperf: Add perf_evlist__first()/last() functions
Add perf_evlist__first()/last() functions to libperf, as internal
functions and rename perf's origins to evlist__first/last.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-29-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 09:51:48 -03:00
Jiri Olsa 648b5af3f3 libperf: Move 'system_wide' from 'struct evsel' to 'struct perf_evsel'
Move the 'system_wide 'member from perf's evsel to libperf's perf_evsel.

Committer notes:

Added stdbool.h as we now use bool here.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25 09:51:46 -03:00
Mamatha Inamdar 6ef81c55a2 perf session: Return error code for perf_session__new() function on failure
This patch is to return error code of perf_new_session function on
failure instead of NULL.

Test Results:

Before Fix:

  $ perf c2c report -input
  failed to open nput: No such file or directory

  $ echo $?
  0
  $

After Fix:

  $ perf c2c report -input
  failed to open nput: No such file or directory

  $ echo $?
  254
  $

Committer notes:

Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(...,
session), i.e. we need to pass zero in case of failure, which was the
case before when NULL was returned by perf_session__new() for failure,
but now we need to negate the result of IS_ERR(session) to respect that
TEST_ASSERT_VAL) expectation of zero meaning failure.

Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-20 15:58:11 -03:00
Arnaldo Carvalho de Melo fa0d98462f perf tools: Remove needless evlist.h include directives
Remove the last unneeded use of cache.h in a header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.

This is an old file, used by now incorrectly in many places, so it was
providing includes needed indirectly, fixup this fallout.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3x3l8gihoaeh7714os861ia7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31 22:24:10 -03:00
Arnaldo Carvalho de Melo 4a3cec8494 perf dsos: Move the dsos struct and its methods to separate source files
So that we can reduce the header dependency tree further, in the process
noticed that lots of places were getting even things like build-id
routines and 'struct perf_tool' definition indirectly, so fix all those
too.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31 22:24:10 -03:00
Arnaldo Carvalho de Melo c1a604dff4 perf tools: Remove needless perf.h include directive from headers
Its not needed there, add it to the places that need it and were getting
it via those headers.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5yulx1u16vyd0zmrbg1tjhju@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-29 17:38:32 -03:00
Jiri Olsa 72932371e7 libperf: Rename the PERF_RECORD_ structs to have a "perf" prefix
Even more, to have a "perf_record_" prefix, so that they match the
PERF_RECORD_ enum they map to.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-29 08:36:12 -03:00
Arnaldo Carvalho de Melo 2da39f1cc3 perf evlist: Remove needless util.h from evlist.h
There is no need for that util/util.h include there and, remove it,
pruning the include tree, fix the fallout by adding necessary headers to
places that were getting needed includes indirectly from evlist.h ->
util.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-s9f7uve8wvykr5itcm7m7d8q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-28 17:19:35 -03:00
Arnaldo Carvalho de Melo 3f604b5f61 perf tool: Rename perf_tool::bpf_event to bpf
No need for that _event suffix, do just like all the other meta event
handlers and suppress that suffix.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lkml.kernel.org/n/tip-03spzxtqafbabbbmnm7y4xfx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-26 19:39:11 -03:00
Arnaldo Carvalho de Melo 97b9d866a6 perf srcline: Add missing srcline.h header to files needing its defs
When srcline was introduced it wrongly added the include to util/sort.h,
even with that header not needing the definitions it provides, fix it by
adding it to the places that need it as a pre patch to remove srcline.h
from sort.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-shuebppedtye8hrgxk15qe3x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-26 11:58:29 -03:00
Arnaldo Carvalho de Melo aeb00b1aea perf record: Move record_opts and other record decls out of perf.h
And into a separate util/record.h, to better isolate things and make
sure that those who use record_opts and the other moved declarations
are explicitly including the necessary header.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-31q8mei1qkh74qvkl9nwidfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-26 11:58:22 -03:00
Jiri Olsa a2f354e3ab libperf: Add perf_thread_map__nr/perf_thread_map__pid functions
So it's part of libperf library as basic functions operating on
perf_thread_map objects.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 17:16:57 -03:00
Arnaldo Carvalho de Melo 0f31c0195c perf script: Add missing counts.h
It is getting this via evsel.h, that don't strictly need counts.h, just
forward declarations for some structs, so add it here before we remove
it from there.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-q4shpvlxyjqz7val1hyrdak9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 17:16:56 -03:00
Arnaldo Carvalho de Melo 124e02be72 perf evswitch: Introduce init() method to set the on/off evsels from the command line
Another step in having all the boilerplate in just one place to then use
in the other tools.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-snreb1wmwyjei3eefwotxp1l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15 12:25:55 -03:00
Arnaldo Carvalho de Melo add3a719c9 perf evswitch: Introduce OPTS_EVSWITCH() for cmd line processing
All tools will want those, so provide a convenient way to get them.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-v16pe3sbf3wjmn152u18f649@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15 12:25:47 -03:00
Arnaldo Carvalho de Melo 0b495b1215 perf evswitch: Add the names of on/off events
So that we can have macros for the OPT_ entries and also for finding
those in an evlist, this way other tools will use this very easily.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-q0og1xoqqi0w38ve5u0a43k2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15 12:24:42 -03:00
Arnaldo Carvalho de Melo 8829e56fa0 perf evswitch: Move switch logic to use in other tools
Now other tools that want switching can use an evswitch for that, just
set it up and add it to the PERF_RECORD_SAMPLE processing function.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-b1trj1q97qwfv251l66q3noj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15 12:24:31 -03:00
Arnaldo Carvalho de Melo d236044272 perf evswitch: Move struct to a separate header to use in other tools
Now that we see that the simple userspace-based "slicing" of events
using delimiter events ("markers") works, lets move it to a separate
header to make it available to other tools, next step will be having
the switch on/off check done at the PERF_RECORD_SAMPLE processing
function moved too.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-z0cyi9ifzlr37cedr9xztc1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15 12:24:24 -03:00
Arnaldo Carvalho de Melo dd41f660c0 perf script: Allow specifying event to switch off processing of other events
Counterpart of --switch-on:

  # perf record -e sched:*,syscalls:sys_*_nanosleep sleep 1
  [ perf record: Woken up 36 times to write data ]
  [ perf record: Captured and wrote 0.032 MB perf.data (10 samples) ]
  #
  # perf script
      :20918 20918 [002] 109866.143696:            sched:sched_waking: comm=perf pid=20919 prio=120 target_cpu=001
      :20918 20918 [002] 109866.143702:            sched:sched_wakeup: perf:20919 [120] success=1 CPU:001
       sleep 20919 [001] 109866.144081:      sched:sched_process_exec: filename=/usr/bin/sleep pid=20919 old_pid=20919
       sleep 20919 [001] 109866.144408:  syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000
       sleep 20919 [001] 109866.144411:      sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
       sleep 20919 [001] 109866.144412:            sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
     swapper     0 [001] 109867.144568:            sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
     swapper     0 [001] 109867.144586:            sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
       sleep 20919 [001] 109867.144614:   syscalls:sys_exit_nanosleep: 0x0
       sleep 20919 [001] 109867.144753:      sched:sched_process_exit: comm=sleep pid=20919 prio=120
  #
  # perf script --switch-off syscalls:sys_exit_nanosleep
      :20918 20918 [002] 109866.143696:            sched:sched_waking: comm=perf pid=20919 prio=120 target_cpu=001
      :20918 20918 [002] 109866.143702:            sched:sched_wakeup: perf:20919 [120] success=1 CPU:001
       sleep 20919 [001] 109866.144081:      sched:sched_process_exec: filename=/usr/bin/sleep pid=20919 old_pid=20919
       sleep 20919 [001] 109866.144408:  syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000
       sleep 20919 [001] 109866.144411:      sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
       sleep 20919 [001] 109866.144412:            sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
     swapper     0 [001] 109867.144568:            sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
     swapper     0 [001] 109867.144586:            sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
       sleep 20919 [001] 109867.144753:      sched:sched_process_exit: comm=sleep pid=20919 prio=120
  #
  # perf script --switch-on syscalls:sys_enter_nanosleep --switch-off syscalls:sys_exit_nanosleep
       sleep 20919 [001] 109866.144411:      sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
       sleep 20919 [001] 109866.144412:            sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
     swapper     0 [001] 109867.144568:            sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
     swapper     0 [001] 109867.144586:            sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
  #
  # perf script --switch-on syscalls:sys_enter_nanosleep --switch-off syscalls:sys_exit_nanosleep --show-on-off
       sleep 20919 [001] 109866.144408:  syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000
       sleep 20919 [001] 109866.144411:      sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
       sleep 20919 [001] 109866.144412:            sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
     swapper     0 [001] 109867.144568:            sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
     swapper     0 [001] 109867.144586:            sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
       sleep 20919 [001] 109867.144614:   syscalls:sys_exit_nanosleep: 0x0
  #

Now think about using this together with 'perf probe' to create custom on/off
events in your app :-)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-li3j01c4tmj9kw6ydsl8swej@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15 12:24:16 -03:00
Arnaldo Carvalho de Melo 6469eb6dff perf script: Allow showing the --switch-on event
One may want to see the --switch-on event as well, allow for that, using
the previous cset example:

  # perf script --switch-on syscalls:sys_enter_nanosleep --show-on-off
        sleep 13638 [001] 108237.582286: syscalls:sys_enter_nanosleep: rqtp: 0x7fff1948ac40, rmtp: 0x00000000
        sleep 13638 [001] 108237.582289:     sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
        sleep 13638 [001] 108237.582291:           sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
      swapper     0 [001] 108238.582428:           sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
      swapper     0 [001] 108238.582458:           sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
        sleep 13638 [001] 108238.582698:     sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
        sleep 13638 [001] 108238.582782:     sched:sched_process_exit: comm=sleep pid=13638 prio=120
  #
  # perf script --switch-on syscalls:sys_enter_nanosleep
        sleep 13638 [001] 108237.582289:     sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
        sleep 13638 [001] 108237.582291:           sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
      swapper     0 [001] 108238.582428:           sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
      swapper     0 [001] 108238.582458:           sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
        sleep 13638 [001] 108238.582698:     sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
        sleep 13638 [001] 108238.582782:     sched:sched_process_exit: comm=sleep pid=13638 prio=120
  #

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Link: https://lkml.kernel.org/n/tip-0omwwoywj1v63gu8cz0tr0cy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15 12:24:08 -03:00
Arnaldo Carvalho de Melo f90a24171a perf script: Allow specifying event to switch on processing of other events
Sometime we want to only consider events after something happens, so
allow discarding events till such events is found, e.g.:

Record all scheduler tracepoints and the sys_enter_nanosleep syscall
event for the 'sleep 1' workload:

  # perf record -e sched:*,syscalls:sys_enter_nanosleep sleep 1
  [ perf record: Woken up 31 times to write data ]
  [ perf record: Captured and wrote 0.032 MB perf.data (10 samples) ]
  #

So we have these events in the generated perf data file:

  # perf evlist
  sched:sched_kthread_stop
  sched:sched_kthread_stop_ret
  sched:sched_waking
  sched:sched_wakeup
  sched:sched_wakeup_new
  sched:sched_switch
  sched:sched_migrate_task
  sched:sched_process_free
  sched:sched_process_exit
  sched:sched_wait_task
  sched:sched_process_wait
  sched:sched_process_fork
  sched:sched_process_exec
  sched:sched_stat_wait
  sched:sched_stat_sleep
  sched:sched_stat_iowait
  sched:sched_stat_blocked
  sched:sched_stat_runtime
  sched:sched_pi_setprio
  sched:sched_move_numa
  sched:sched_stick_numa
  sched:sched_swap_numa
  sched:sched_wake_idle_without_ipi
  syscalls:sys_enter_nanosleep
  # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
  #

Then show all of the events that actually took place in this 'perf record' session:

  # perf script
          :13637 13637 [002] 108237.581529:            sched:sched_waking: comm=perf pid=13638 prio=120 target_cpu=001
          :13637 13637 [002] 108237.581537:            sched:sched_wakeup: perf:13638 [120] success=1 CPU:001
           sleep 13638 [001] 108237.581992:      sched:sched_process_exec: filename=/usr/bin/sleep pid=13638 old_pid=13638
           sleep 13638 [001] 108237.582286:  syscalls:sys_enter_nanosleep: rqtp: 0x7fff1948ac40, rmtp: 0x00000000
           sleep 13638 [001] 108237.582289:      sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
           sleep 13638 [001] 108237.582291:            sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
         swapper     0 [001] 108238.582428:            sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
         swapper     0 [001] 108238.582458:            sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
           sleep 13638 [001] 108238.582698:      sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
           sleep 13638 [001] 108238.582782:      sched:sched_process_exit: comm=sleep pid=13638 prio=120
  #

Now lets see only the ones that took place after a certain "marker":

  # perf script --switch-on syscalls:sys_enter_nanosleep
           sleep 13638 [001] 108237.582289:      sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
           sleep 13638 [001] 108237.582291:            sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
         swapper     0 [001] 108238.582428:            sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
         swapper     0 [001] 108238.582458:            sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
           sleep 13638 [001] 108238.582698:      sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
           sleep 13638 [001] 108238.582782:      sched:sched_process_exit: comm=sleep pid=13638 prio=120
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-f1oo0ufdhrkx6nhy2lj1ierm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15 12:23:58 -03:00
Jiri Olsa 5643b1a59e libperf: Move nr_members from perf's evsel to libperf's perf_evsel
Move the nr_members member from perf's evsel to libperf's perf_evsel.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-60-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29 18:34:46 -03:00
Jiri Olsa 453fa03090 libperf: Add perf_evlist__set_maps() function
Move the evlist__set_maps() function from tools/perf to libperf.

Committer notes:

Fix up reject due to earlier inversion in calling perf_evlist__init().

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-57-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29 18:34:45 -03:00
Jiri Olsa af663bd01b libperf: Add threads to struct perf_evsel
Move 'threads' from tools/perf's evsel to libperf's perf_evsel struct.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-53-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29 18:34:45 -03:00
Jiri Olsa d400bd3abf libperf: Add cpus to struct perf_evsel
Mov the 'cpus' field from tools/perf's evsel to libperf's perf_evsel.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-51-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29 18:34:45 -03:00
Jiri Olsa 1fc632cef4 libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel
Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'.

Committer notes:

Fixed up these:

 tools/perf/arch/arm/util/auxtrace.c
 tools/perf/arch/arm/util/cs-etm.c
 tools/perf/arch/arm64/util/arm-spe.c
 tools/perf/arch/s390/util/auxtrace.c
 tools/perf/util/cs-etm.c

Also

  cc1: warnings being treated as errors
  tests/sample-parsing.c: In function 'do_test':
  tests/sample-parsing.c:162: error: missing initializer
  tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus')

   	struct evsel evsel = {
   		.needs_swap = false,
  -		.core.attr = {
  -			.sample_type = sample_type,
  -			.read_format = read_format,
  +		.core = {
  +			. attr = {
  +				.sample_type = sample_type,
  +				.read_format = read_format,
  +			},

  [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1
  gcc (GCC) 4.4.7

Also we don't need to include perf_event.h in
tools/perf/lib/include/perf/evsel.h, forward declaring 'struct
perf_event_attr' is enough. And this even fixes the build in some
systems where things are used somewhere down the include path from
perf_event.h without defining __always_inline.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29 18:34:45 -03:00
Jiri Olsa 63503dba87 perf evlist: Rename struct perf_evlist to struct evlist
Rename struct perf_evlist to struct evlist, so we don't have a name
clash when we add struct perf_evlist in libperf.

Committer notes:

Added fixes to build on arm64, from Jiri and from me
(tools/perf/util/cs-etm.c)

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29 18:34:42 -03:00
Jiri Olsa 32dcd021d0 perf evsel: Rename struct perf_evsel to struct evsel
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.

Committer notes:

Added fixes for arm64, provided by Jiri.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29 18:34:42 -03:00
Jiri Olsa 9749b90e56 perf tools: Rename struct thread_map to struct perf_thread_map
Rename struct thread_map to struct perf_thread_map, so it could be part
of libperf.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29 18:34:42 -03:00
Jiri Olsa f854839ba2 perf cpu_map: Rename struct cpu_map to struct perf_cpu_map
Rename struct cpu_map to struct perf_cpu_map, so it could be part of
libperf.

Committer notes:

Added fixes for arm64, provided by Jiri.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29 18:34:42 -03:00
Andi Kleen dde4e732a5 perf script: Fix off by one in brstackinsn IPC computation
When we hit the end of a program block, need to count the last
instruction too for the IPC computation. This caused large errors for
small blocks.

  % perf script -b ls / > /dev/null

Before:

  % perf script -F +brstackinsn --xed
  ...
        00007f94c9ac70d8                        jz 0x7f94c9ac70e3                       # PRED 3 cycles [36] 4.33 IPC
        00007f94c9ac70e3                        testb  $0x20, 0x31d(%rbx)
        00007f94c9ac70ea                        jnz 0x7f94c9ac70b0
        00007f94c9ac70ec                        testb  $0x8, 0x205ad(%rip)
        00007f94c9ac70f3                        jz 0x7f94c9ac6ff0               # PRED 1 cycles [37] 3.00 IPC

After:

  % perf script -F +brstackinsn --xed
  ...
        00007f94c9ac70d8                        jz 0x7f94c9ac70e3                       # PRED 3 cycles [15] 4.67 IPC
        00007f94c9ac70e3                        testb  $0x20, 0x31d(%rbx)
        00007f94c9ac70ea                        jnz 0x7f94c9ac70b0
        00007f94c9ac70ec                        testb  $0x8, 0x205ad(%rip)
        00007f94c9ac70f3                        jz 0x7f94c9ac6ff0               # PRED 1 cycles [16] 4.00 IPC

Suggested-by: Denis Bakhvalov <denis.bakhvalov@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190711181922.18765-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-23 08:59:37 -03:00
Adrian Hunter 5bf83c29a0 perf script: Add scripting operation process_switch()
Add scripting operation process_switch() to process switch events.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190710085810.1650-18-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-10 12:34:09 -03:00
Song Liu 9d49169c59 perf script: Assume native_arch for pipe mode
In pipe mode, session->header.env.arch is not populated until the events
are processed. Therefore, the following command crashes:

   perf record -o - | perf script

(gdb) bt

It fails when we try to compare env.arch against uts.machine:

        if (!strcmp(uts.machine, session->header.env.arch) ||
            (!strcmp(uts.machine, "x86_64") &&
             !strcmp(session->header.env.arch, "i386")))
                native_arch = true;

In pipe mode, it is tricky to find env.arch at this stage. To keep it
simple, let's just assume native_arch is always true for pipe mode.

Reported-by: David Carrillo Cisneros <davidca@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org #v5.1+
Fixes: 3ab481a1cf ("perf script: Support insn output for normal samples")
Link: http://lkml.kernel.org/r/20190621014438.810342-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-09 10:13:28 -03:00
Arnaldo Carvalho de Melo 7f7c536f23 tools lib: Adopt zalloc()/zfree() from tools/perf
Eroding a bit more the tools/perf/util/util.h hodpodge header.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-09 10:13:26 -03:00