- Large cleanup of the con3270/tty3270 driver. Among others this fixes:
* Background Color Support
* ASCII Line Character Support
* VT100 Support
* Geometries other than 80x24
- Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
uaccess functions, which will be used by KVM to access KVM guest memory
with a specific storage key.
- Add support for user space events counting to CPUMF.
- Cleanup the vfio/ccw code, which also allows now to properly support 2K
Format-2 IDALs.
- Move kernel page table allocation and initialization to decompressor,
which finally allows to enter the kernel with dynamic address translation
enabled. This in turn allows to get rid of code with special handling in
the kernel, which has to distinguish if DAT is on or off.
- Replace kretprobe with rethook.
- Various improvements to vfio/ap queue resets:
* Use TAPQ to verify completion of a reset in progress rather than
multiple invocations of ZAPQ.
* Check TAPQ response codes when verifying successful completion of ZAPQ.
* Fix erroneous handling of some error response codes.
* Increase the maximum amount of time to wait for successful completion
of ZAPQ.
- Rework system call wrappers to get rid of alias functions, which were
only left on s390.
- Cleanup diag288_wdt watchdog driver. It has been agreed on with Guenter
Roeck that this goes upstream via the s390 tree.
- Add missing loadparm parameter handling for list-directed ECKD ipl/reipl.
- Various improvements to memory detection code.
- Remove arch_cpu_idle_time() since the current implementation is broken,
and allows user space observable accounted idle times which can
temporarily decrease.
- Add Reset DAT-Protection support: (only) allow to change PTEs from RO to
RW with a new RDP instruction. Unlike the currently used IPTE
instruction, this does not necessarily guarantee that TLBs of all CPUs
are synchronously flushed; and that remote CPUs can see spurious
protection faults. The overall improvement for not requiring an all CPU
synchronization, like it is required with IPTE, should be beneficial.
- Fix KFENCE page fault reporting.
- Smaller cleanups and improvement all over the place.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmPzWhQACgkQIg7DeRsp
bsKkdQ//QbCwDMt6T3bmi6gGgs9HRSkLOTHAlOIRuetEzRiBzm/O4Gm8NycvPspl
BIcuXmQKt+gBS44tWikKpwuhmWrAtiFUxs/M1uPfRXqjUf+ZFJinPJgtPCBa/3rv
tQkh541QxpX4K5Ks71WKv2Kh0RjaTqw5Kj+rlDBYHsxZvb28mDigINRYoVSxNUKi
dTVlR0UgdGLecXfezpvWeEAbJu6Q2pbIkOT3tNOumNqRAoUN4cbH3P0agHJdq8oj
L/++d4tfVbwL8N/VCwIVBeW/AQzA0B2UCDVz75Pd55+FFrIGVp1hn7QC9QQieomL
fzGOTrL4D9U8JkAIJqhioA1NlcN1+QW2svoMVo0N3vBJpIbzX4bZKTDxZZ26dG9H
ox7YvhsZtJA7p34X5hetoObzZcmiYJStT+BDao7q1x3oLf4G31HaP+YUDIKBPmNW
ieZa+ujYbKor1pD6ysaMVX+c1qhfX6S/V0uBAikoqMWUVUvH/ZeuSxCSfMuvWUrQ
KFuc0HnPiiIO1Ux3wN5oN33+pWCSdUcJOeg4aj0jkkFT9Ct3TOBupIGBGyhOAh6r
OTp1iqJuQjwOmkWPLyRuGMzRmDDp+hWz9qNF/DFwIV1IMi9AzJjEOg31cMVxx3gG
iM25560uqvhhUwQFbyjVgJmj00dmqMX07q8QSVOgg9oUrnRhQrc=
=MW9x
-----END PGP SIGNATURE-----
Merge tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Large cleanup of the con3270/tty3270 driver. Among others this fixes:
- Background Color Support
- ASCII Line Character Support
- VT100 Support
- Geometries other than 80x24
- Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
uaccess functions, which will be used by KVM to access KVM guest
memory with a specific storage key
- Add support for user space events counting to CPUMF
- Cleanup the vfio/ccw code, which also allows now to properly support
2K Format-2 IDALs
- Move kernel page table allocation and initialization to decompressor,
which finally allows to enter the kernel with dynamic address
translation enabled. This in turn allows to get rid of code with
special handling in the kernel, which has to distinguish if DAT is on
or off
- Replace kretprobe with rethook
- Various improvements to vfio/ap queue resets:
- Use TAPQ to verify completion of a reset in progress rather than
multiple invocations of ZAPQ.
- Check TAPQ response codes when verifying successful completion of
ZAPQ.
- Fix erroneous handling of some error response codes.
- Increase the maximum amount of time to wait for successful
completion of ZAPQ
- Rework system call wrappers to get rid of alias functions, which were
only left on s390
- Cleanup diag288_wdt watchdog driver. It has been agreed on with
Guenter Roeck that this goes upstream via the s390 tree
- Add missing loadparm parameter handling for list-directed ECKD
ipl/reipl
- Various improvements to memory detection code
- Remove arch_cpu_idle_time() since the current implementation is
broken, and allows user space observable accounted idle times which
can temporarily decrease
- Add Reset DAT-Protection support: (only) allow to change PTEs from RO
to RW with a new RDP instruction. Unlike the currently used IPTE
instruction, this does not necessarily guarantee that TLBs of all
CPUs are synchronously flushed; and that remote CPUs can see spurious
protection faults. The overall improvement for not requiring an all
CPU synchronization, like it is required with IPTE, should be
beneficial
- Fix KFENCE page fault reporting
- Smaller cleanups and improvement all over the place
* tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (182 commits)
s390/irq,idle: simplify idle check
s390/processor: add test_and_set_cpu_flag() and test_and_clear_cpu_flag()
s390/processor: let cpu helper functions return boolean values
s390/kfence: fix page fault reporting
s390/zcrypt: introduce ctfm field in struct CPRBX
s390: remove confusing comment from uapi types header file
vfio/ccw: remove WARN_ON during shutdown
s390/entry: remove toolchain dependent micro-optimization
s390/mem_detect: do not truncate online memory ranges info
s390/vx: remove __uint128_t type from __vector128 struct again
s390/mm: add support for RDP (Reset DAT-Protection)
s390/mm: define private VM_FAULT_* reasons from top bits
Documentation: s390: correct spelling
s390/ap: fix status returned by ap_qact()
s390/ap: fix status returned by ap_aqic()
s390: vfio-ap: tighten the NIB validity check
Revert "s390/mem_detect: do not update output parameters on failure"
s390/idle: remove arch_cpu_idle_time() and corresponding code
s390/vx: use simple assignments to access __vector128 members
s390/vx: add 64 and 128 bit members to __vector128 struct
...
where possible, when supporting a debug registers swap feature for
SEV-ES guests
- Add support for AMD's version of eIBRS called Automatic IBRS which is
a set-and-forget control of indirect branch restriction speculation
resources on privilege change
- Add support for a new x86 instruction - LKGS - Load kernel GS which is
part of the FRED infrastructure
- Reset SPEC_CTRL upon init to accomodate use cases like kexec which
rediscover
- Other smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmP1RDIACgkQEsHwGGHe
VUohBw//ZB9ZRqsrKdm6D9YaP2x4Zb+kqKqo6rjYeWaYqyPyCwDujPwh+pb3Oq1t
aj62muDv1t/wEJc8mKNkfXkjEEtBVAOcpb5YIpKreoEvNKyevol83Ih0u5iJcTRE
E5qf8HDS8b/JZrcazJJLl6WQmQNH5RiKSu5bbCpRhoeOcyo5pRYR5MztK9vNmAQk
GMdwHsUSU+jN8uiE4HnpaOb/luhgFindRwZVTpdjJegQWLABS8cl3CKeTv4+PW45
isvv37XnQP248wsptIEVRHeG6g3g/HtvwRx7DikUw06QwUyUK7H9hJssOoSP8TL9
u4psRwfWnJ1OxU6klL+s0Ii+pjQ97wXmK/oqK7QkdUwhWqR/mQAW2e9kWHAngyDn
A6mKbzSM6HFAeSXQpB9cMb6uvYRD44SngDFe3WXtEK8jiiQ70ikUm4E28I5KJOPg
s+RyioHk0NFRHYSOOBqNG1NKz6ED7L3GbgbbzxkgMh21AAyI3X351t+PtGoLV5ew
eqOsM7lbg9Scg1LvPk1JcoALS8USWqgar397rz9qGUs+OkPWBtEBCmTdMz/Eb+2t
g/WHdLS5/ajSs5gNhT99W3DeqZMPDEkgBRSeyBBmY3CUD3gBL2wXEktRXv504zBR
RC4oyUPX3c9E2ib6GATLE3kBLbcz9hTWbMxF+X3lLJvTVd/Qc2o=
=v/ZC
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Cache the AMD debug registers in per-CPU variables to avoid MSR
writes where possible, when supporting a debug registers swap feature
for SEV-ES guests
- Add support for AMD's version of eIBRS called Automatic IBRS which is
a set-and-forget control of indirect branch restriction speculation
resources on privilege change
- Add support for a new x86 instruction - LKGS - Load kernel GS which
is part of the FRED infrastructure
- Reset SPEC_CTRL upon init to accomodate use cases like kexec which
rediscover
- Other smaller fixes and cleanups
* tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd: Cache debug register values in percpu variables
KVM: x86: Propagate the AMD Automatic IBRS feature to the guest
x86/cpu: Support AMD Automatic IBRS
x86/cpu, kvm: Add the SMM_CTL MSR not present feature
x86/cpu, kvm: Add the Null Selector Clears Base feature
x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf
x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature
KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code
x86/cpu, kvm: Add support for CPUID_80000021_EAX
x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h>
x86/gsseg: Use the LKGS instruction if available for load_gs_index()
x86/gsseg: Move load_gs_index() to its own new header file
x86/gsseg: Make asm_load_gs_index() take an u16
x86/opcode: Add the LKGS instruction to x86-opcode-map
x86/cpufeature: Add the CPU feature bit for LKGS
x86/bugs: Reset speculation control settings on init
x86/cpu: Remove redundant extern x86_read_arch_cap_msr()
- Rework a large bunch of drivers to use the generic thermal trip
structure and use the opportunity to do more cleanups by removing
unused functions from the OF code (Daniel Lezcano).
- Remove core header inclusion from drivers (Daniel Lezcano).
- Fix some locking issues related to the generic thermal trip rework
(Johan Hovold).
- Fix a crash when requesting the critical temperature on tegra, which
is related to the generic trip point work (Jon Hunter).
- Clean up thermal device unregistration code (Viresh Kumar).
- Fix and clean up thermal control core initialization error code
paths (Daniel Lezcano).
- Relocate the trip points handling code into a separate file (Daniel
Lezcano).
- Make the thermal core fail registration of thermal zones and cooling
devices if the thermal class has not been registered (Rafael Wysocki).
- Add trip point initialization helper functions for ACPI-defined trip
points and modify two thermal drivers to use them (Rafael Wysocki,
Daniel Lezcano).
- Make the core thermal control code use sysfs_emit_at() instead of
scnprintf() where applicable (ye xingchen).
- Consolidate code accessing the Intel TCC (Thermal Control Circuitry)
MSRs by introducing library functions for that and making the
TCC-related code in thermal drivers use them (Zhang Rui).
- Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
changes (Zhang Rui).
- Address an "unsigned expression compared with zero" warning in the
intel_soc_dts_iosf thermal driver (Yang Li).
- Update comments regarding two functions in the Intel Menlow thermal
driver (Deming Wang).
- Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
driver (ye xingchen).
- Make the intel_pch thermal driver support the Wellsburg PCH (Tim
Zimmermann).
- Modify the intel_pch and processor_thermal_device_pci thermal drivers
use generic trip point tables instead of thermal zone trip point
callbacks (Daniel Lezcano).
- Add production mode attribute sysfs attribute to the int340x thermal
driver (Srinivas Pandruvada).
- Rework dynamic trip point updates handling and locking in the int340x
thermal driver (Rafael Wysocki).
- Make the int340x thermal driver use a generic trip points table
instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel
Lezcano).
- Clean up and improve the int340x thermal driver (Rafael Wysocki).
- Simplify and clean up the intel_pch thermal driver (Rafael Wysocki).
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada).
- Add two module parameters, cpumask and max_idle, to the Intel powerclamp
thermal driver to allow it to affect only a specific subset of CPUs
instead of all of them (Srinivas Pandruvada).
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano).
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya).
- Use strscpy() to instead of strncpy() in the thermal core (Xu Panda).
- Fix thermal_sampling_exit() (Vincent Guittot).
- Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi).
- Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
Uytterhoeven).
- Fix useless call to set_trips() when resuming in the rcar_gen3
thermal control driver and add interrupt support detection at init
time to it (Niklas Söderlund).
- Fix memory corruption in the hi3660 thermal driver (Yongqin Liu).
- Fix include path for libnl3 in pkg-config file for libthermal (Vibhav
Pant).
- Remove syscfg-based driver for st as the platform is not supported
any more (Alain Volmat).
-----BEGIN PGP SIGNATURE-----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=tZwm
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The majority of changes here are related to the general switch-over to
using arrays of generic trip point structures registered along with a
thermal zone instead of trip point callbacks (this has been done
mostly by Daniel Lezcano with some help from yours truly on the Intel
drivers front).
Apart from that and the related reorganization of code, there are some
enhancements of the existing driver and a new Mediatek Low Voltage
Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major
rework so it will use the generic idle_inject facility for CPU idle
time injection going forward and it will take additional module
parameters for specifying the subset of CPUs to be affected by it
(work done by Srinivas Pandruvada).
Also included are assorted fixes and a whole bunch of cleanups.
Specifics:
- Rework a large bunch of drivers to use the generic thermal trip
structure and use the opportunity to do more cleanups by removing
unused functions from the OF code (Daniel Lezcano)
- Remove core header inclusion from drivers (Daniel Lezcano)
- Fix some locking issues related to the generic thermal trip rework
(Johan Hovold)
- Fix a crash when requesting the critical temperature on tegra,
which is related to the generic trip point work (Jon Hunter)
- Clean up thermal device unregistration code (Viresh Kumar)
- Fix and clean up thermal control core initialization error code
paths (Daniel Lezcano)
- Relocate the trip points handling code into a separate file (Daniel
Lezcano)
- Make the thermal core fail registration of thermal zones and
cooling devices if the thermal class has not been registered
(Rafael Wysocki)
- Add trip point initialization helper functions for ACPI-defined
trip points and modify two thermal drivers to use them (Rafael
Wysocki, Daniel Lezcano)
- Make the core thermal control code use sysfs_emit_at() instead of
scnprintf() where applicable (ye xingchen)
- Consolidate code accessing the Intel TCC (Thermal Control
Circuitry) MSRs by introducing library functions for that and
making the TCC-related code in thermal drivers use them (Zhang Rui)
- Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
changes (Zhang Rui)
- Address an "unsigned expression compared with zero" warning in the
intel_soc_dts_iosf thermal driver (Yang Li)
- Update comments regarding two functions in the Intel Menlow thermal
driver (Deming Wang)
- Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
driver (ye xingchen)
- Make the intel_pch thermal driver support the Wellsburg PCH (Tim
Zimmermann)
- Modify the intel_pch and processor_thermal_device_pci thermal
drivers use generic trip point tables instead of thermal zone trip
point callbacks (Daniel Lezcano)
- Add production mode attribute sysfs attribute to the int340x
thermal driver (Srinivas Pandruvada)
- Rework dynamic trip point updates handling and locking in the
int340x thermal driver (Rafael Wysocki)
- Make the int340x thermal driver use a generic trip points table
instead of thermal zone trip point callbacks (Rafael Wysocki,
Daniel Lezcano)
- Clean up and improve the int340x thermal driver (Rafael Wysocki)
- Simplify and clean up the intel_pch thermal driver (Rafael Wysocki)
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada)
- Add two module parameters, cpumask and max_idle, to the Intel
powerclamp thermal driver to allow it to affect only a specific
subset of CPUs instead of all of them (Srinivas Pandruvada)
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano)
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya)
- Use strscpy() to instead of strncpy() in the thermal core (Xu
Panda)
- Fix thermal_sampling_exit() (Vincent Guittot)
- Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam
Chihi)
- Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
Uytterhoeven)
- Fix useless call to set_trips() when resuming in the rcar_gen3
thermal control driver and add interrupt support detection at init
time to it (Niklas Söderlund)
- Fix memory corruption in the hi3660 thermal driver (Yongqin Liu)
- Fix include path for libnl3 in pkg-config file for libthermal
(Vibhav Pant)
- Remove syscfg-based driver for st as the platform is not supported
any more (Alain Volmat)"
* tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits)
thermal/drivers/st: Remove syscfg based driver
thermal: Remove core header inclusion from drivers
tools/lib/thermal: Fix include path for libnl3 in pkg-config file.
thermal/drivers/hisi: Drop second sensor hi3660
thermal/drivers/rcar_gen3_thermal: Fix device initialization
thermal/drivers/rcar_gen3_thermal: Create device local ops struct
thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming
thermal/drivers/rcar_gen3: Add support for R-Car V4H
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support
thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver
dt-bindings: thermal: mediatek: Add LVTS thermal controllers
thermal/drivers/mediatek: Relocate driver to mediatek folder
tools/lib/thermal: Fix thermal_sampling_exit()
Documentation: powerclamp: Fix numbered lists formatting
Documentation: powerclamp: Escape wildcard in cpumask description
Documentation: admin-guide: Add toctree entry for thermal docs
thermal: intel: powerclamp: Add two module parameters
Documentation: admin-guide: Move intel_powerclamp documentation
thermal: core: Use sysfs_emit_at() instead of scnprintf()
thermal: intel: powerclamp: Fix duration module parameter
...
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello).
- Constify acpi_get_handle() pathname argument to allow its callers to
pass const pathnames to it (Sakari Ailus).
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin).
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner).
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie).
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki).
- Add support for NBFT to the ACPI table parser (Stuart Hayes).
- Introduce list of known non-PNP devices to avoid enumerating some of
them as PNP devices (Rafael Wysocki).
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts
to report the actual maintainers information (Rafael Wysocki).
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach).
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede).
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede).
- Fix string termination handling in the ACPI battery driver (Armin
Wolf).
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue).
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans
de Goede).
- Silence missing prototype warnings in some places in the ACPI-related
code (Ammar Faizi).
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh).
- Correct spelling in firmware-guide/ACPI (Randy Dunlap).
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko).
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang Li).
-----BEGIN PGP SIGNATURE-----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=BoTs
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix a frequency limit issue in the ACPI processor performance
library code, fix a few issues in the ACPICA code, improve Crystal
Cove support in the ACPI PMIC driver, fix string handling in the ACPI
battery driver, add IRQ override quirks for a few machines more, fix
other assorted problems and clean up code and documentation.
Specifics:
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello)
- Constify acpi_get_handle() pathname argument to allow its callers
to pass const pathnames to it (Sakari Ailus)
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin)
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner)
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie)
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki)
- Add support for NBFT to the ACPI table parser (Stuart Hayes)
- Introduce list of known non-PNP devices to avoid enumerating some
of them as PNP devices (Rafael Wysocki)
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow
scripts to report the actual maintainers information (Rafael
Wysocki)
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach)
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede)
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede)
- Fix string termination handling in the ACPI battery driver (Armin
Wolf)
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue)
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver
(Hans de Goede)
- Silence missing prototype warnings in some places in the
ACPI-related code (Ammar Faizi)
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh)
- Correct spelling in firmware-guide/ACPI (Randy Dunlap)
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko)
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang
Li)"
* tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
ACPI: make kobj_type structures constant
Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit
ACPICA: Fix typo in CDAT DSMAS struct definition
ACPI: resource: Do IRQ override on all TongFang GMxRGxx
ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
ACPI: CPPC: Fix some kernel-doc comments
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
Documentation: firmware-guide/ACPI: correct spelling
ACPI: PMIC: Add comments with DSDT power opregion field names
ACPI: battery: Increase maximum string length
ACPI: battery: Fix buffer overread if not NUL-terminated
ACPI: APEI: EINJ: Limit error type to 32-bit width
MAINTAINERS: Add x86 ACPI paths to the ACPI entry
ACPI: battery: Fix missing NUL-termination with large strings
ACPI: PNP: Introduce list of known non-PNP devices
ACPICA: nsrepair: handle cases without a return value correctly
ACPI: Silence missing prototype warnings
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
...
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya).
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang).
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney).
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh).
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König).
- Make the TEO cpuidle governor check CPU utilization in order to refine
idle state selection (Kajetan Puchalski).
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in that
driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing).
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann).
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh).
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki).
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski).
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald).
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald).
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap).
- Fix possible name leak in powercap_register_zone() (Yang Yingliang).
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui).
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada).
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui).
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman).
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler).
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=lZLx
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
This pull request contains the following branches:
doc.2023.01.05a: Documentation updates.
fixes.2023.01.23a: Miscellaneous fixes, perhaps most notably:
o Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number
of callbacks.
o Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized.
o Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have doen this for mnay years.)
o Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled,
so this should not (yet) affect production use cases.)
kvfree.2023.01.03a: Cause kfree_rcu() and friends to take advantage of
polled grace periods, thus reducing memory footprint by almost
two orders of magnitude, admittedly on a microbenchmark.
This series also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs
where kfree_rcu(p), which can block, was typed instead of the
intended kfree_rcu(p, rh).
srcu.2023.01.03a: SRCU updates, perhaps most notably fixing a bug that
causes SRCU to fail when booted on a system with a non-zero boot
CPU. This surprising situation actually happens for kdump kernels
on the powerpc architecture. It also adds an srcu_down_read()
and srcu_up_read(), which act like srcu_read_lock() and
srcu_read_unlock(), but allow an SRCU read-side critical section
to be handed off from one task to another.
srcu-always.2023.02.02a: Cleans up the now-useless SRCU Kconfig option.
There are a few more commits that are not yet acked or pulled
into maintainer trees, and these will be in a pull request for
a later merge window.
tasks.2023.01.03a: RCU-tasks updates, perhaps most notably these fixes:
o A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang.
o A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can result
in a too-short grace period.
o A race between shrinking RCU tasks down to a single callback list
and queuing a new callback to some other CPU, but where that
queuing is delayed for more than an RCU grace period. This can
result in that callback being stranded on the non-boot CPU.
torture.2023.01.05a: Torture-test updates and fixes.
torturescript.2023.01.03a: Torture-test scripting updates and fixes.
stall.2023.01.09a: Provide additional RCU CPU stall-warning information
in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and
restore the full five-minute timeout limit for expedited RCU
CPU stall warnings.
-----BEGIN PGP SIGNATURE-----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=bBYK
-----END PGP SIGNATURE-----
Merge tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes, perhaps most notably:
- Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number of
callbacks
- Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized
- Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have done this for many years)
- Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled, so
this should not (yet) affect production use cases)
- Make kfree_rcu() and friends take advantage of polled grace periods,
thus reducing memory footprint by almost two orders of magnitude,
admittedly on a microbenchmark
This also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs where
kfree_rcu(p), which can block, was typed instead of the intended
kfree_rcu(p, rh)
- SRCU updates, perhaps most notably fixing a bug that causes SRCU to
fail when booted on a system with a non-zero boot CPU. This
surprising situation actually happens for kdump kernels on the
powerpc architecture
This also adds an srcu_down_read() and srcu_up_read(), which act like
srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side
critical section to be handed off from one task to another
- Clean up the now-useless SRCU Kconfig option
There are a few more commits that are not yet acked or pulled into
maintainer trees, and these will be in a pull request for a later
merge window
- RCU-tasks updates, perhaps most notably these fixes:
- A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang
- A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can
result in a too-short grace period
- A race between shrinking RCU tasks down to a single callback
list and queuing a new callback to some other CPU, but where
that queuing is delayed for more than an RCU grace period. This
can result in that callback being stranded on the non-boot CPU
- Torture-test updates and fixes
- Torture-test scripting updates and fixes
- Provide additional RCU CPU stall-warning information in kernels built
with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute
timeout limit for expedited RCU CPU stall warnings
* tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep()
kernel/notifier: Remove CONFIG_SRCU
init: Remove "select SRCU"
fs/quota: Remove "select SRCU"
fs/notify: Remove "select SRCU"
fs/btrfs: Remove "select SRCU"
fs: Remove CONFIG_SRCU
drivers/pci/controller: Remove "select SRCU"
drivers/net: Remove "select SRCU"
drivers/md: Remove "select SRCU"
drivers/hwtracing/stm: Remove "select SRCU"
drivers/dax: Remove "select SRCU"
drivers/base: Remove CONFIG_SRCU
rcu: Disable laziness if lazy-tracking says so
rcu: Track laziness during boot and suspend
rcu: Remove redundant call to rcu_boost_kthread_setaffinity()
rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts
rcu: Align the output of RCU CPU stall warning messages
rcu: Add RCU stall diagnosis information
sched: Add helper nr_context_switches_cpu()
...
All the commits are trivial. Doc updates and a trivial code cleanup.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCY/Kvjw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfcZAQDoyqEm807R2iaELEfee0xq/NPwJIaDRnXDP6ZL
rIEtqAD8CzpvvtKauekMIsCHVq7SuxDae8Hi0a/RImN8e1sy6wY=
=pUSo
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"All the changes are trivial: documentation updates and a trivial code
cleanup"
* tag 'cgroup-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: fix a few kernel-doc warnings & coding style
docs: cgroup-v1: use numbered lists for user interface setup
docs: cgroup-v1: add internal cross-references
docs: cgroup-v1: make swap extension subsections subsections
docs: cgroup-v1: use bullet lists for list of stat file tables
docs: cgroup-v1: move hierarchy of accounting caption
docs: cgroup-v1: fix footnotes
docs: cgroup-v1: use code block for locking order schema
docs: cgroup-v1: wrap remaining admonitions in admonition blocks
docs: cgroup-v1: replace custom note constructs with appropriate admonition blocks
cgroup/cpuset: no need to explicitly init a global static variable
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code.
This also contains a first usecase in the block multi-queue code which
Jens asked to take along with the librarization.
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing.
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context.
- Move the IPI multiplexing code from the Apple AIC driver into the
core. so it can be reused by RISCV.
Drivers:
- Plug OF node refcounting leaks in various drivers.
- Correctly mark level triggered interrupts in the Broadcom L2 drivers.
- The usual small fixes and improvements.
- No new drivers for the record!
-----BEGIN PGP SIGNATURE-----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=+pu3
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code
This also contains a first usecase in the block multi-queue code
which Jens asked to take along with the librarization
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context
- Move the IPI multiplexing code from the Apple AIC driver into the
core, so it can be reused by RISCV
Drivers:
- Plug OF node refcounting leaks in various drivers
- Correctly mark level triggered interrupts in the Broadcom L2
drivers
- The usual small fixes and improvements
- No new drivers for the record!"
* tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
irqdomain: Switch to per-domain locking
irqchip/mvebu-odmi: Use irq_domain_create_hierarchy()
irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-its: Use irq_domain_create_hierarchy()
irqchip/gic-v2m: Use irq_domain_create_hierarchy()
irqchip/alpine-msi: Use irq_domain_add_hierarchy()
x86/uv: Use irq_domain_create_hierarchy()
x86/ioapic: Use irq_domain_create_hierarchy()
irqdomain: Clean up irq_domain_push/pop_irq()
irqdomain: Drop leftover brackets
irqdomain: Drop dead domain-name assignment
irqdomain: Drop revmap mutex
irqdomain: Fix domain registration race
irqdomain: Fix mapping-creation race
irqdomain: Refactor __irq_domain_alloc_irqs()
irqdomain: Look for existing mapping only once
irqdomain: Drop bogus fwspec-mapping error handling
...
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be directed
to the no restart function instead of doing a partial setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a user
space bug, preventing this is a correctness issue and caters to the
least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and RISC-V
variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=I67j
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and clockevent/source drivers:
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be
directed to the no restart function instead of doing a partial
setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a
user space bug, preventing this is a correctness issue and caters
to the least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and
RISC-V variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place"
* tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ
clocksource/drivers/em_sti: Mark driver as non-removable
clocksource/drivers/sh_tmu: Mark driver as non-removable
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
clocksource/drivers/timer-microchip-pit64b: Add delay timer
clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM
dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx
dt-bindings: timer: mediatek,mtk-timer: add MT8365
clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback
clocksource/drivers/sh_cmt: Mark driver as non-removable
clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST
clocksource/drivers/riscv: Increase the clock source rating
clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
dt-bindings: timer: Add bindings for the RISC-V timer device
RISC-V: time: initialize hrtimer based broadcast clock event device
dt-bindings: timer: rk-timer: Add rktimer for rv1126
time/debug: Fix memory leak with using debugfs_lookup()
clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime()
clocksource: Verify HPET and PMTMR when TSC unverified
...
allocation. Its goal is to control resource allocation in external slow
memory which is connected to the machine like for example through CXL devices,
accelerators etc
-----BEGIN PGP SIGNATURE-----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=8hmj
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add support for a new AMD feature called slow memory bandwidth
allocation. Its goal is to control resource allocation in external
slow memory which is connected to the machine like for example
through CXL devices, accelerators etc
* tag 'x86_cache_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix a silly -Wunused-but-set-variable warning
Documentation/x86: Update resctrl.rst for new features
x86/resctrl: Add interface to write mbm_local_bytes_config
x86/resctrl: Add interface to write mbm_total_bytes_config
x86/resctrl: Add interface to read mbm_local_bytes_config
x86/resctrl: Add interface to read mbm_total_bytes_config
x86/resctrl: Support monitor configuration
x86/resctrl: Add __init attribute to rdt_get_mon_l3_config()
x86/resctrl: Detect and configure Slow Memory Bandwidth Allocation
x86/resctrl: Include new features in command line options
x86/cpufeatures: Add Bandwidth Monitoring Event Configuration feature flag
x86/resctrl: Add a new resource type RDT_RESOURCE_SMBA
x86/cpufeatures: Add Slow Memory Bandwidth Allocation feature flag
x86/resctrl: Replace smp_call_function_many() with on_each_cpu_mask()
Sagar's email listed in maintainers is bouncing as his division was sold
off by the company. I attempted to contact him some days ago on what the
bounce email told me was his new contact information, but am yet to
receive a response.
Paul and Palmer are listed on each of the bindings, both of whom were
alive & well as of Wednesday so the bindings remain maintained.
CC: Sagar Kadam <sagar.kadam@openfive.com>
CC: Sagar Kadam <sagar.kadam@sifive.com>
Link: https://lore.kernel.org/all/785425ca-4000-a7e4-16d6-4d68c91b158d@kernel.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230217180035.39658-1-conor@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
controller
- Add support for decoding errors from the first and second level memory
on SKL-based hardware
- Add support for the memory controllers in Intel Granite Rapids and
Emerald Rapids machines
- First round of amd64_edac driver simplification and removal of
unneeded functionality
- The usual cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=i3bo
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add a driver for the RAS functionality on Xilinx's on chip memory
controller
- Add support for decoding errors from the first and second level
memory on SKL-based hardware
- Add support for the memory controllers in Intel Granite Rapids and
Emerald Rapids machines
- First round of amd64_edac driver simplification and removal of
unneeded functionality
- The usual cleanups and fixes
* tag 'edac_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Shut up an -Werror,-Wsometimes-uninitialized clang false positive
EDAC/amd64: Remove early_channel_count()
EDAC/amd64: Remove PCI Function 0
EDAC/amd64: Remove PCI Function 6
EDAC/amd64: Remove scrub rate control for Family 17h and later
EDAC/amd64: Don't set up EDAC PCI control on Family 17h+
EDAC/i10nm: Add driver decoder for Sapphire Rapids server
EDAC/i10nm: Add Intel Granite Rapids server support
EDAC/i10nm: Make more configurations CPU model specific
EDAC/i10nm: Add Intel Emerald Rapids server support
EDAC/skx_common: Delete duplicated and unreachable code
EDAC/skx_common: Enable EDAC support for the "near" memory
EDAC/qcom: Add platform_device_id table for module autoloading
EDAC/zynqmp: Add EDAC support for Xilinx ZynqMP OCM
dt-bindings: edac: Add bindings for Xilinx ZynqMP OCM
The dt-bindings tools will compile the yaml dt examples
and this prevents an error about this node not existing.
Signed-off-by: Bastian Germann <bage@debian.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215203711.6293-3-bage@debian.org
- Improve the scalability of the CFS bandwidth unthrottling logic
with large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with
the generic scheduler code. Add __cpuidle methods as noinstr to
objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS,
to query previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period,
to improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- ... Misc other cleanups, fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l1nN
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+/uBgAKCRDbK58LschI
g0ngAPwJHd1RicBuy2C4fLv0nGKZtmYZBAnTGlI2RisPxU6BRwEAwUDLHuc5K6nR
j261okOxOy/MRxdN1NhmR6Qe7nMyQAk=
=tYU+
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-17
We've added 64 non-merge commits during the last 7 day(s) which contain
a total of 158 files changed, 4190 insertions(+), 988 deletions(-).
The main changes are:
1) Add a rbtree data structure following the "next-gen data structure"
precedent set by recently-added linked-list, that is, by using
kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky.
2) Add a new benchmark for hashmap lookups to BPF selftests,
from Anton Protopopov.
3) Fix bpf_fib_lookup to only return valid neighbors and add an option
to skip the neigh table lookup, from Martin KaFai Lau.
4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory
accouting for container environments, from Yafang Shao.
5) Batch of ice multi-buffer and driver performance fixes,
from Alexander Lobakin.
6) Fix a bug in determining whether global subprog's argument is
PTR_TO_CTX, which is based on type names which breaks kprobe progs,
from Andrii Nakryiko.
7) Prep work for future -mcpu=v4 LLVM option which includes usage of
BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier,
from Eduard Zingerman.
8) More prep work for later building selftests with Memory Sanitizer
in order to detect usages of undefined memory, from Ilya Leoshkevich.
9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer
dereference via sendmsg(), from Maciej Fijalkowski.
10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui.
11) Fix BPF memory allocator in combination with BPF hashtab where it could
corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao.
12) Fix LoongArch BPF JIT to always use 4 instructions for function
address so that instruction sequences don't change between passes,
from Hengqi Chen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
selftests/bpf: Add bpf_fib_lookup test
bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup
riscv, bpf: Add bpf trampoline support for RV64
riscv, bpf: Add bpf_arch_text_poke support for RV64
riscv, bpf: Factor out emit_call for kernel and bpf context
riscv: Extend patch_text for multiple instructions
Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"
selftests/bpf: Add global subprog context passing tests
selftests/bpf: Convert test_global_funcs test to test_loader framework
bpf: Fix global subprog context argument resolution logic
LoongArch, bpf: Use 4 instructions for function address in JIT
bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state
bpf: Disable bh in bpf_test_run for xdp and tc prog
xsk: check IFF_UP earlier in Tx path
Fix typos in selftest/bpf files
selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd()
...
====================
Link: https://lore.kernel.org/r/20230217221737.31122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A sentence that checks for later spec version is meant for developers
hacking the documentation source. Make it comment block (hidden from
actual output).
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Message-Id: <20221220095828.27588-4-bagasdotme@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"It's at this stage that" means "At this point", so use the latter as it
is more effective.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Message-Id: <20221220095828.27588-3-bagasdotme@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Parenthesize targets to links in "References" section to distinguish
them from remaining texts.
While at it, describe the second target.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Message-Id: <20221220095828.27588-2-bagasdotme@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are scenes that we want to show the character value of traced
arguments other than a decimal or hexadecimal or string value for debug
convinience. I add a new type named 'char' to do it and a new test case
file named 'kprobe_args_char.tc' to do selftest for char type.
For example:
The to be traced function is 'void demo_func(char type, char *name);', we
can add a kprobe event as follows to show argument values as we want:
echo 'p:myprobe demo_func $arg1:char +0($arg2):char[5]' > kprobe_events
we will get the following trace log:
... myprobe: (demo_func+0x0/0x29) arg1='A' arg2={'b','p','f','1',''}
Link: https://lore.kernel.org/all/20221219110613.367098-1-dolinux.peng@gmail.com/
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for
TV boxes and so far only comes with a dts for its refernece design.
The other 32-bit boards that were added are two ASpeed AST2600 based BMC
boards, the Microchip sam9x60_curiosity development board (Armv5 based!),
the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53
and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113 chip,
plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700 non-merge
changesets, among them over 400 alone for Qualcomm. The newly added SoCs
this time are all recent high-end embedded SoCs for various markets,
each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410),
SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568,
RK3566 and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding
to the total number of changes.
-----BEGIN PGP SIGNATURE-----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=I8Ga
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.
The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...
The majority of the changes are for the OMAP2 platform, mostly
removing some dead code that got left behind from previous cleanups.
Aside from that, there are very minor updates and correctness fixes for
Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1.
-----BEGIN PGP SIGNATURE-----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=4Xcx
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The majority of the changes are for the OMAP2 platform, mostly
removing some dead code that got left behind from previous cleanups.
Aside from that, there are very minor updates and correctness fixes
for Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1"
* tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
dt-bindings: soc: samsung: exynos-pmu: allow phys as child
ARM: imx: mach-imx6ul: add imx6ulz support
ARM: imx: Call ida_simple_remove() for ida_simple_get
arm64: drop redundant "ARMv8" from Kconfig option title
ARM: ep93xx: Convert to use descriptors for GPIO LEDs
ARM: s3c: fix s3c64xx_set_timer_source prototype
ARM: OMAP2+: Fix spelling typos in comment
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/machine.h>
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/pinmux.h>
ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
ARM: BCM63xx: remove useless goto statement
ARM: omap2: make functions static
ARM: omap2: remove unused omap2_pm_init
ARM: omap2: remove unused declarations
ARM: omap2: remove unused functions
ARM: omap2: smartreflex: remove on_init control
ARM: omap2: remove APLL control
ARM: omap2: simplify clock2xxx header
ARM: omap2: remove unused omap_hwmod_reset.c
ARM: omap2: remove unused headers
...
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
-----BEGIN PGP SIGNATURE-----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=poRc
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
Fix the longstanding implementation limitation that fsverity was only
supported when the Merkle tree block size, filesystem block size, and
PAGE_SIZE were all equal. Specifically, add support for Merkle tree
block sizes less than PAGE_SIZE, and make ext4 support fsverity on
filesystems where the filesystem block size is less than PAGE_SIZE.
Effectively, this means that fsverity can now be used on systems with
non-4K pages, at least on ext4. These changes have been tested using
the verity group of xfstests, newly updated to cover the new code paths.
Also update fs/verity/ to support verifying data from large folios.
There's also a similar patch for fs/crypto/, to support decrypting data
from large folios, which I'm including in this pull request to avoid a
merge conflict between the fscrypt and fsverity branches.
There will be a merge conflict in fs/buffer.c with some of the foliation
work in the mm tree. Please use the merge resolution from linux-next.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY/KJtRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/A/AP0RUlCClBRuHwXPRG0we8R1L153ga4s
Vl+xRpCr+SswXwEAiOEpYN5cXoVKzNgxbEXo2pQzxi5lrpjZgUI6CL3DuQs=
=ZRFX
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity updates from Eric Biggers:
"Fix the longstanding implementation limitation that fsverity was only
supported when the Merkle tree block size, filesystem block size, and
PAGE_SIZE were all equal.
Specifically, add support for Merkle tree block sizes less than
PAGE_SIZE, and make ext4 support fsverity on filesystems where the
filesystem block size is less than PAGE_SIZE.
Effectively, this means that fsverity can now be used on systems with
non-4K pages, at least on ext4. These changes have been tested using
the verity group of xfstests, newly updated to cover the new code
paths.
Also update fs/verity/ to support verifying data from large folios.
There's also a similar patch for fs/crypto/, to support decrypting
data from large folios, which I'm including in here to avoid a merge
conflict between the fscrypt and fsverity branches"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fscrypt: support decrypting data from large folios
fsverity: support verifying data from large folios
fsverity.rst: update git repo URL for fsverity-utils
ext4: allow verity with fs block size < PAGE_SIZE
fs/buffer.c: support fsverity in block_read_full_folio()
f2fs: simplify f2fs_readpage_limit()
ext4: simplify ext4_readpage_limit()
fsverity: support enabling with tree block size < PAGE_SIZE
fsverity: support verification with tree block size < PAGE_SIZE
fsverity: replace fsverity_hash_page() with fsverity_hash_block()
fsverity: use EFBIG for file too large to enable verity
fsverity: store log2(digest_size) precomputed
fsverity: simplify Merkle tree readahead size calculation
fsverity: use unsigned long for level_start
fsverity: remove debug messages and CONFIG_FS_VERITY_DEBUG
fsverity: pass pos and size to ->write_merkle_tree_block
fsverity: optimize fsverity_cleanup_inode() on non-verity files
fsverity: optimize fsverity_prepare_setattr() on non-verity files
fsverity: optimize fsverity_file_open() on non-verity files
- Add per-cpu kthreads for low-latency decompression for Android
use cases;
- Get rid of tagged pointer helpers since they are rarely used now;
- Several code cleanups to reduce codebase;
- Documentation and MAINTAINERS updates.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCY/IDjhEceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBNbTAQDT2njll/B2JSYbVC2I2HYTZSyFXEaHhH+M
6gHRbEhTWAD/VNiAcdE600IkUwut/78tDvwlz/XJSd2JQMMwkTSviwc=
=oroQ
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"The most noticeable feature for this cycle is per-CPU kthread
decompression since Android use cases need low-latency I/O handling in
order to ensure the app runtime performance, currently unbounded
workqueue latencies are not quite good for production on many aarch64
hardwares and thus we need to introduce a deterministic expectation
for these. Decompression is CPU-intensive and it is sleepable for
EROFS, so other alternatives like decompression under softirq contexts
are not considered. More details are in the corresponding commit
message.
Others are random cleanups around the whole codebase and we will
continue to clean up further in the next few months.
Due to Lunar New Year holidays, some other new features were not
completely reviewed and solidified as expected and we may delay them
into the next version.
Summary:
- Add per-cpu kthreads for low-latency decompression for Android use
cases
- Get rid of tagged pointer helpers since they are rarely used now
- Several code cleanups to reduce codebase
- Documentation and MAINTAINERS updates"
* tag 'erofs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (21 commits)
erofs: fix an error code in z_erofs_init_zip_subsystem()
erofs: unify anonymous inodes for blob
erofs: relinquish volume with mutex held
erofs: maintain cookies of share domain in self-contained list
erofs: remove unused device mapping in meta routine
MAINTAINERS: erofs: Add Documentation/ABI/testing/sysfs-fs-erofs
Documentation/ABI: sysfs-fs-erofs: update supported features
erofs: remove unused EROFS_GET_BLOCKS_RAW flag
erofs: update print symbols for various flags in trace
erofs: make kobj_type structures constant
erofs: add per-cpu threads for decompression as an option
erofs: tidy up internal.h
erofs: get rid of z_erofs_do_map_blocks() forward declaration
erofs: move zdata.h into zdata.c
erofs: remove tagged pointer helpers
erofs: avoid tagged pointers to mark sync decompression
erofs: get rid of erofs_inode_datablocks()
erofs: simplify iloc()
erofs: get rid of debug_one_dentry()
erofs: remove linux/buffer_head.h dependency
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
=+BG5
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
The block found on Apple's M2 SoC is compatible with the existing driver
so add its per-SoC compatible.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230202-asahi-t8112-dt-v1-14-cb5442d1c229@jannau.net
Signed-off-by: Mark Brown <broonie@kernel.org>
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add myself as
co-maintainer
This also drags in a couple of branches to avoid conflicts:
- The shared 'kvm-hw-enable-refactor' branch that reworks
initialization, as it conflicted with the virtual cache topology
changes.
- arm64's 'for-next/sme2' branch, as the PSCI relay changes, as both
touched the EL2 initialization code.
-----BEGIN PGP SIGNATURE-----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=r4s/
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.3
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
- New and improved irqdomain locking, closing a number of races that
became apparent now that we are able to probe drivers in parallel
- A bunch of OF node refcounting bugs have been fixed
- We now have a new IPI mux, lifted from the Apple AIC code and
made common. It is expected that riscv will eventually benefit
from it
- Two small fixes for the Broadcom L2 drivers
- Various cleanups and minor bug fixes
-----BEGIN PGP SIGNATURE-----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=ONcj
-----END PGP SIGNATURE-----
Merge tag 'irqchip-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- New and improved irqdomain locking, closing a number of races that
became apparent now that we are able to probe drivers in parallel
- A bunch of OF node refcounting bugs have been fixed
- We now have a new IPI mux, lifted from the Apple AIC code and
made common. It is expected that riscv will eventually benefit
from it
- Two small fixes for the Broadcom L2 drivers
- Various cleanups and minor bug fixes
Link: https://lore.kernel.org/r/20230218143452.3817627-1-maz@kernel.org
* zero all padding for KVM_GET_DEBUGREGS
* fix rST warning
* disable vPMU support on hybrid CPUs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPw5PsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNqaAf6A0zjrdY1KjSyvrcHr0NV6lUfU+Ye
lc5xrtAJDuO7kERgnqFGPeg3a72tA4a9tlFrTdqqQIrAxnvVn4JNP5gtD7UxfpOn
PELO7JUbG3/CV2oErTugH02n3lKN/pLSISAClFkO7uAL5sJEM2pXH+ws1CZ7F7kN
FbPdnmvzi7tnTpv3oJ+gVl2l0HZYTnH4DydFGo68O3lP+oFgRXznkF5rpMxAe6oK
93fvSWGabVCft278sSVq5XpYfKQSJb5j8KjB8L4qqAlRh0ZJA5haDZWQyaaJvNY0
oefFj9XYPpA08l8VqZ2ti5vE4b6e+o2/oTg3Nwf/5DrQxJiYOGTHKoA/NA==
=H68L
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm/x86 fixes from Paolo Bonzini:
- zero all padding for KVM_GET_DEBUGREGS
- fix rST warning
- disable vPMU support on hybrid CPUs
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: initialize all of the kvm_debugregs structure before sending it to userspace
perf/x86: Refuse to export capabilities for hybrid PMUs
KVM: x86/pmu: Disable vPMU support on hybrid CPUs (host PMUs)
Documentation/hw-vuln: Fix rST warning
This synchronizes the information reported by ioctl and sysfs.
The mismatch is confusing because "wdctl" from util-linux uses the ioctl
when used with root privileges and sysfs without.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221216-watchdog-sysfs-v2-2-6189311103a9@weissschuh.net
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This synchronizes the information reported by ioctl and sysfs.
The mismatch is confusing because "wdctl" from util-linux uses the ioctl
when used with root privileges and sysfs without.
The file is called "fw_version" instead of "firmware_version" as
"firmware_version" is already used as custom attribute by single drivers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221216-watchdog-sysfs-v2-1-6189311103a9@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Property "fsl,suspend-in-wait" suspends watchdog in "WAIT" mode which
corresponds to Linux's Suspend-to-Idle S0 mode. If this property is not
set and the device is put into Suspend-to-Idle mode, the watchdog
triggers a reset after 128 seconds.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221104070358.426657-3-andrej.picej@norik.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Merge Qualcomm MSM timer bindings into watchdog, because the timer
compatibles are already included here and the hardware is quite similar.
While converting the MSM timer bindings, adjust clock-frequency
property to take only one frequency, instead of two, because:
1. DT schema does not allow to frequencies,
2. The Linux timer driver reads only first frequency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Both of type of watchdogs described in the binding (the KPSS watchdog
and APSS WDT timer) have interrupts. Allow interrupts and describe them
for KPSS watchdog to fix warnings like:
watchdog@17c10000: Unevaluated properties are not allowed ('interrupts' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221212163532.142533-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The MSM timer ("qcom,msm-timer") is a bit different timer and watchdog
device than KPSS watchdog. It has its own generic and specific
compatibles, so fix the list to reflect this. Adjust the example to
show the newer KPSS watchdog.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221212163532.142533-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The compatible "qcom,kpss-wdt" is too generic and should not be used
alone. Mark it as deprecated when not prepended by specific compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221212163532.142533-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The device specific compatibles ("qcom,kpss-wdt-ipq4019") should be
follwed by fallback "qcom,kpss-wdt", which is actually used by Linux
driver for binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221212163532.142533-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Document the MSM8994 watchdog timer which is already used in DT.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221117105845.13644-2-konrad.dybcio@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The WDT block on the RZ/Five SoC is identical to one found on the RZ/G2UL
SoC. "renesas,r9a07g043-wdt" compatible string will be used on the
RZ/Five SoC so to make this clear, update the comment to include RZ/Five
SoC.
No driver changes are required as generic compatible string
"renesas,rzg2l-wdt" will be used as a fallback on RZ/Five SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221118133829.12855-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Convert the Amlogic Meson6 SoCs Watchdog timer bindings to dt-schema.
Take in account the used interrupts property.
The "amlogic,meson8-wdt" representation has been simplified
since there's no users of this compatible used along the
"amlogic,meson6-wdt".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221117-b4-amlogic-bindings-convert-v3-3-e28dd31e3bed@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Convert the DT binding for GPIO WDT to JSON schema.
Cc: luka.perkov@sartura.hr
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221125112904.48652-1-robert.marko@sartura.hr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
On some SoCs the watchdog device is actually mixed with timer, e.g.
the qcom,msm-timer on older Qualcomm SoCs where this is actually one
hardware block responsible for both system timer and watchdog.
Allow calling such device nodes as "timer".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221212174933.208900-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Document compatibility string to support I2C controller
in GXP.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add xilinx I2C new version 'xlnx,axi-iic-2.1' string to compatible.
Add clock-frequency as optional property.
Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
QSPI on Qualcomm SDM845, SC7180 and SC7280 SoCs uses OPP table (both in
DTS and Linux driver) and is suuplied by CX power domain. Document
missing properties to fix:
sc7280-idp2.dtb: spi@88dc000: Unevaluated properties are not allowed ('operating-points-v2', 'power-domains' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230217155802.848178-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add documentation for the bindings for Synopsys' DesignWare PWM block
as we will be adding DT/platform support to the Linux driver soon.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Reflect in the binding that the cd interrupt is optional,
and add a description of the interrupts.
Fixes: 09b31a6103 ("dt-bindings: mmc: meson-gx: support specifying cd interrupt")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/c1437eb6-0c01-809f-422b-cb1109489355@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add list format so that compiled documentation looks like it was
intended to.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230210184247.221134-3-jerry.hoemann@hpe.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The IPMI documentation moved to Documentation/driver-api/ipmi.rst.
Update reference to reflect new location.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230210184247.221134-2-jerry.hoemann@hpe.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Correct spelling problems for Documentation/core-api/padata.rst as
reported by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: netdev@vger.kernel.org
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: linux-crypto@vger.kernel.org
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Link: https://lore.kernel.org/r/20230215053744.11716-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 5d8c5e430a ("docs/mm: Physical Memory: add structure, introduction
and nodes description") slips in a minor spelling mistake for the config
PAGE_EXTENSION.
Correct the config name in the physical-memory documentation.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230215100808.9613-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This line was initially placed in {# jinja2 comments #}, but that led to an
"invalid token" complaint from spdxcheck.py. Rather than fix the script
for a usage we'll likely never see anywhere else, just switch to an HTML
comment, which spdxcheck.py thinks is fine.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Using "va" and "vb" doesn't match what's written on the board, or the
communications from StarFive.
Switching to using the silkscreened version number will ease confusion &
the risk of another spin of the board containing a "conflicting" version
identifier.
As the binding has not made it into mainline yet, take the opportunity
to "correct" things.
Suggested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/linux-riscv/Y+4AxDSDLyL1WAqh@wendy/
Fixes: 97b7ed0727 ("dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230216131511.3327943-1-conor.dooley@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for the enclustra PE1 board that is based on Arria10
-----BEGIN PGP SIGNATURE-----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=8EYA
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=E8ON
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA dts updates for v6.3, part 2
- Add support for the enclustra PE1 board that is based on Arria10
* tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
Link: https://lore.kernel.org/r/20230216160910.509065-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Even though the hardware monitoring documentation already stated that new
drivers should use [devm_]devm_hwmon_device_register_with_info() to
register with the hardware monitoring subsystem, we still get submissions
for new drivers using the older APIs. There is no benefit to use those
APIs. On the contrary, using the older APIs results in substantially larger
code size. Explicitly deprecate [devm_]hwmon_device_register_with_groups()
to ensure that all new drivers use the latest API.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
-----BEGIN PGP SIGNATURE-----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=p6+A
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Major stack changes:
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
* tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: brcmfmac: p2p: Introduce generic flexible array frame member
wifi: mac80211: add documentation for amsdu_mesh_control
wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description
wifi: mac80211: always initialize link_sta with sta
wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
wifi: cfg80211: Set SSID if it is not already set
wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready
wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status()
wifi: rtw88: usb: drop now unnecessary URB size check
wifi: rtw88: usb: send Zero length packets if necessary
wifi: rtw88: usb: Set qsel correctly
wifi: mac80211: fix off-by-one link setting
wifi: mac80211: Fix for Rx fragmented action frames
wifi: mac80211: avoid u32_encode_bits() warning
wifi: mac80211: Don't translate MLD addresses for multicast
wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint
wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify
wifi: nl80211: Allow authentication frames and set keys on NAN interface
wifi: mac80211: fix non-MLO station association
wifi: mac80211: Allow NSS change only up to capability
...
====================
Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's been quite a lot of activity this release, but not really
one big feature - lots of new devices, plus a lot of cleanup and
modernisation work spread throughout the subsystem:
- More factoring out of common operations into helper functions
by Morimoto-san.
- DT schema conversons and stylistic nits.
- Continued work on building out the new SOF IPC4 scheme.
- Support for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPuKzoACgkQJNaLcl1U
h9AO6wf/Us32gNLnLhT+YaPKouVq4KYpEXDeaIOdOCgs8RtonuCgURZ/D2TkzBVL
EHLPp4QgqdIWo3FKkWgsXIOpO7R0//cj/vpccJ0PBe4VmvDinXq3dzGPPy6ZbHAS
SatE5zItBKRUHaDliRk6S7IFEqJKwwlBqEzV0K41Q4EstYlIe+No0XIVDj3oRjHb
jPmAD9XRPqsDaFFFb0NrVl9M/8HwBlc3j/Gnt19eJB/07IdgIr0S8mJn3qlFfGqu
O8KgBo4+tvVMCQAxTVZ5exb/qTtK3gEPDuMi0eOKJz+g9wMJ4tRz+D8/8TQSmxmW
lWORmNTx8jml7G4KirxIV4q4Lr0hRQ==
=mB3t
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.3
There's been quite a lot of activity this release, but not really
one big feature - lots of new devices, plus a lot of cleanup and
modernisation work spread throughout the subsystem:
- More factoring out of common operations into helper functions
by Morimoto-san.
- DT schema conversons and stylistic nits.
- Continued work on building out the new SOF IPC4 scheme.
- Support for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1.
The phys property is used for allowing the eusb2 to interface
with the repeater, which is modelled as a phy driver.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230208190200.2966723-4-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SM8550 SoC uses Synopsis eUSB2 repeater found in PM8550b.
Add a dt-binding schema for the new driver.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230208190200.2966723-2-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapters 5.4.6.3.4 and 5.1.8.1.3 describe the test
command which can be used to test the mux connection between both sides.
Currently, no algorithm is implemented to make use of this command. This
requires that each multiplexed upper layer protocol supervises the
underlying muxer connection to handle possible connection losses.
Introduce ioctl commands and functions to optionally enable keep alive
handling via the test command as described in chapter 5.4.6.3.4. A single
incrementing octet "ka_num" is being used for unique identification of each
single keep alive packet. Retries will use the same "ka_num" value as the
original packet. Retry count and interval are taken from the general
parameters N2 and T2.
Add usage description and basic example for the new ioctl to the n_gsm
documentation.
Note that support for the test command is mandatory and already present in
the muxer implementation since the very first version.
Also note that the previous ioctl structure gsm_config cannot be extended
due to missing checks against zero of the field "unused".
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230214122737.1976-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add devlink info support for ef100. The information reported is obtained
through the MCDI interface with the specific meaning defined in new
documentation file.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Contains a number of fixes to vc4 and ivpu. The patches to the probe
helpers were cherry-picked from the regular development branch.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPkufIACgkQaA3BHVML
eiN5WQf+KUHujvKiUf1/gKzUzjfW7Zl9MiRdCiW0GWIvo8BDPk7PaUYwg2SxOp7h
giGtZh8kMR2kzNBvFv2lgkkysmNcamogLqwicr4KxYeI9/EEJ/A6bZ5T0G2DrQRR
FXD4OD3wf/gIa0Ilse6nP0ag/UOahUNykSsvQhx1pE3KClzLO8lcbqKR+WXWnuJQ
PygFyAoqpkXzVE1FxzLdy0cg+MeDPXpc8rdhjmMCxzXZoetNiCvDw0Bk4QHi81xI
pvkQ0CeYNsC+G1mYC/Xamssz0LVW8undGqvA9enI/tsXjpQhdyfKlss/LHxbkxrw
dvn9GFE3IC6A7vqbFh5w5K5H+RBREA==
=jUJo
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2023-02-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
Contains a number of fixes to vc4 and ivpu. The patches to the probe
helpers were cherry-picked from the regular development branch.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y+S6HBmaRJNPYiBG@linux-uq9g
Correct spelling problems for Documentation/core-api/packing.rst as
reported by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Link: https://lore.kernel.org/r/20230215053738.11562-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The schema had snps,reset-delay-us as dependent on snps,reset-gpio. The
actual property is called snps,reset-delays-us, so fix this to catch any
devicetree defining snsps,reset-delays-us without snps,reset-gpio.
Fixes: 7db3545aef ("dt-bindings: net: stmmac: Convert the binding to a schemas")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230214171505.224602-1-ahalaney@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) From Roi and Mark: MultiPort eswitch support
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort Eswitch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic
2.1) Cleanups related to mlx5's devlink port logic
2.2) Move devlink port registration to be done before netdev alloc
2.3) Create auxdev devlink instance in the same ns as parent devlink
2.4) Suspend auxiliary devices only in case of PCI device suspend
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmPsBlsACgkQSD+KveBX
+j6izAgAtvzimjzOqI8J0FKPW3piRH3VtNWUrlGAf4HHPI0lZMbEV5GIaSI15JeH
wrIpNXKzaA+6+NZ7TzTwqVO+zyKCQVpRw7xPANIJ2A5dId36jU2AgW06zgzFuYWa
mXKG8rAUls6E5a5DHTaY/SueWMO9KMOfLzHFXHNsLAKTAw+FoDdlGso5vgvsy44g
2/N/kDBdzC5n8og934sM7JymthnTVyuGe/Au2w1UUR1MMZ46OQgmhStDwqS5MrzI
pIi+tWFG9YFM5/J8d13y7X/xMCq26Aw6SZSUhsRfTk0goy0uKaU6yYm8vSbO0mci
+e0c8bpWL/MzAhMzWj8CwBPeO6knOw==
=tYc2
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-02-10
1) From Roi and Mark: MultiPort eswitch support
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort Eswitch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic
2.1) Cleanups related to mlx5's devlink port logic
2.2) Move devlink port registration to be done before netdev alloc
2.3) Create auxdev devlink instance in the same ns as parent devlink
2.4) Suspend auxiliary devices only in case of PCI device suspend
* tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Suspend auxiliary devices only in case of PCI device suspend
net/mlx5: Remove "recovery" arg from mlx5_load_one() function
net/mlx5e: Create auxdev devlink instance in the same ns as parent devlink
net/mlx5e: Move devlink port registration to be done before netdev alloc
net/mlx5e: Move dl_port to struct mlx5e_dev
net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_port
net/mlx5e: Pass mdev to mlx5e_devlink_port_register()
net/mlx5: Remove outdated comment
net/mlx5e: TC, Remove redundant parse_attr argument
net/mlx5e: Use a simpler comparison for uplink rep
net/mlx5: Lag, Add single RDMA device in multiport mode
net/mlx5: Lag, set different uplink vport metadata in multiport eswitch mode
net/mlx5: E-Switch, rename bond update function to be reused
net/mlx5e: TC, Add peer flow in mpesw mode
net/mlx5: Lag, Control MultiPort E-Switch single FDB mode
====================
Link: https://lore.kernel.org/r/20230214221239.159033-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update devlink-health.rst file:
- Add devlink formatted message (fmsg) API documentation.
- Add auto-dump as a condition to do dump once error reported.
- Expand OOB to clarify this acronym.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's fine for these properties to be absent, as the driver doesn't fail
without them and functions with settings inherited from the reset/previous
stage bootloader state.
Fixes: 6c463222a2 ("dt-bindings: power: supply: pm8941-coincell: Convert to DT schema format")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a specific compatible for the coincell charger present on PM8998.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
DT_SCHEMA_FILES used to allow specifying a space separated list of file
paths, but the introduction of partial matches support broke this
feature:
$ make dtbs_check DT_SCHEMA_FILES="path/to/schema1.yaml path/to/schema2.yaml"
[...]
LINT Documentation/devicetree/bindings
usage: yamllint [-h] [-] [-c CONFIG_FILE | -d CONFIG_DATA] [--list-files] [...]
[-v]
[FILE_OR_DIR ...]
yamllint: error: one of the arguments FILE_OR_DIR - is required
[...]
Restore the lost functionality by preparing a grep filter that is able
to handle multiple search patterns.
Additionally, as suggested by Rob, use ':' instead of ' ' as the
patterns separator char. Hence, the command above becomes:
$ make dtbs_check DT_SCHEMA_FILES="path/to/schema1.yaml:path/to/schema2.yaml"
Fixes: 309d955985 ("dt-bindings: kbuild: Support partial matches with DT_SCHEMA_FILES")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230209193735.795288-1-cristian.ciocaltea@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Correct spelling problems for Documentation/i2c/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert i2c-st.txt into st,sti-i2c.yaml for the i2c-st driver.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Qualcomm G-Link RPM edge bindings do not allow and do not use mbox-names
property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-4-krzysztof.kozlowski@linaro.org
Merge power management utilities and documentation updates for 6.3-rc1:
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler).
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap).
* pm-tools:
PM: tools: use canonical ftrace path
* pm-docs:
Documentation: power: correct spelling
Merge updates of the powercap framework, generic PM domains, Energy
Model and operating performance points for 6.3-rc1:
- Fix possible name leak in powercap_register_zone() (Yang Yingliang).
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui).
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada).
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui).
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman).
- Add missing 'cache-unified' property in example for kryo OPP bindings
(Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Remove "select SRCU" (Paul E. McKenney).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
* powercap:
powercap: intel_rapl: Fix handling for large time window
powercap: idle_inject: Support 100% idle injection
powercap: intel_rapl: add support for Emerald Rapids
powercap: intel_rapl: add support for Meteor Lake
powercap: fix possible name leak in powercap_register_zone()
* pm-domains:
PM: domains: fix memory leak with using debugfs_lookup()
* pm-em:
PM: EM: fix memory leak with using debugfs_lookup()
* pm-opp:
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array
drivers/opp: Remove "select SRCU"
dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example
28th bit of fixed supply sink PDO represents higher capability.
When this bit is set, the sink device needs more than vsafe5V
(eg: 12 V) to provide full functionality. This patch adds
this higher capability sysfs interface for sink PDO.
28th bit of fixed supply source PDO represents usb_suspend_supported
attribute. This usb_suspend_supported sysfs is already exposed for
source PDOs. This patch adds 'source-capabilities' in
usb_suspend_supported sysfs documentation for additional clarity.
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230214114543.205103-2-saranya.gopal@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* The last part of the cmpxchg patches
* A few fixes
-----BEGIN PGP SIGNATURE-----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=HOly
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* Two more V!=R patches
* The last part of the cmpxchg patches
* A few fixes
Stephen Rothwell reported htmldocs warning when merging bpf-next tree,
which was the same warning as reported by kernel test robot:
Documentation/bpf/graph_ds_impl.rst:62: ERROR: Error in "code-block" directive:
maximum 1 argument(s) allowed, 12 supplied.
The error is due to Sphinx confuses node_data struct declaration with
code-block directive option.
Fix the warning by separating the code-block marker with node_data struct
declaration.
Link: https://lore.kernel.org/linux-next/20230215144505.4751d823@canb.auug.org.au/
Link: https://lore.kernel.org/linux-doc/202302151123.wUE5FYFx-lkp@intel.com/
Fixes: c31315c3aa ("bpf, documentation: Add graph documentation for non-owning refs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230215123253.41552-3-bagasdotme@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Document support for the Thermal Sensor/Chip Internal Voltage
Monitor/Core Voltage Monitor (THS/CIVM/CVM) on the Renesas R-Car V4H
(R8A779G0) SoC.
Unlike most other R-Car Gen3 and Gen4 SoCs, it has 4 instead of 3
sensors, so increase the maximum number of reg tuples.
Just like other R-Car Gen4 SoCs, interrupts are not routed to the
INTC-AP but to the ECM.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/11f740522ec479011cc8eef6bb450603be394def.1675958665.git.geert+renesas@glider.be
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge thermal control changes related to Intel platforms for 6.3-rc1:
- Rework ACPI helper functions for thermal control to retrieve a trip
point temperature instead of initializing a trip point objetc (Rafael
Wysocki).
- Clean up and improve the int340x thermal driver ((Rafael Wysocki).
- Simplify and clean up the intel_pch thermal driver ((Rafael Wysocki).
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada).
- Add two module parameters, cpumask and max_idle, to the Intel powerclamp
thermal driver to allow it to affect only a specific subset of CPUs
instead of all of them (Srinivas Pandruvada).
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano).
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya).
* thermal-intel: (25 commits)
Documentation: powerclamp: Fix numbered lists formatting
Documentation: powerclamp: Escape wildcard in cpumask description
Documentation: admin-guide: Add toctree entry for thermal docs
thermal: intel: powerclamp: Add two module parameters
Documentation: admin-guide: Move intel_powerclamp documentation
thermal: intel: powerclamp: Fix duration module parameter
thermal: intel: powerclamp: Return last requested state as cur_state
thermal: intel: quark_dts: Use generic trip points
thermal: intel: powerclamp: Use powercap idle-inject feature
powercap: idle_inject: Add update callback
powercap: idle_inject: Export symbols
thermal: intel: powerclamp: Fix cur_state for multi package system
thermal: intel: intel_pch: Drop struct board_info
thermal: intel: intel_pch: Rename board ID symbols
thermal: intel: intel_pch: Fold suspend and resume routines into their callers
thermal: intel: intel_pch: Fold two functions into their callers
thermal: intel: intel_pch: Eliminate device operations object
thermal: intel: intel_pch: Rename device operations callbacks
thermal: intel: intel_pch: Eliminate redundant return pointers
thermal: intel: intel_pch: Make pch_wpt_add_acpi_psv_trip() return int
...
The sysfs path for the NFS4 client identfier should start with
the path component of 'nfs' for the kset, and then the 'net'
path component for the netns object, followed by the
'nfs_client' path component for the NFS client kobject,
and ending with 'identifier' for the netns_client_id
kobj_attribute.
Fixes: a28faaddb2 ("Documentation: Add an explanation of NFSv4 client identifiers")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1801326
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
kernel test robot reported htmldocs warning:
Documentation/admin-guide/pm/amd-pstate.rst:343: WARNING: duplicate label admin-guide/pm/amd-pstate:user space interface in ``sysfs``, other instance in Documentation/admin-guide/pm/amd-pstate.rst
The documentation contains two sections with the same "User Space Interface
in ``sysfs``" title. The first one deals with per-policy sysfs and the
second one is about general attributes (currently only global attributes
are documented).
Disambiguate title text of both sections to fix the warning.
Link: https://lore.kernel.org/linux-doc/202302151041.0SWs1RHK-lkp@intel.com/
Fixes: b9e6a2d47b ("Documentation: amd-pstate: introduce new global sysfs attributes")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge ACPI backlight driver changes, miscellaneous ACPI-related changes
and ACPI-related documentation updates for 6.3-rc1:
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans
de Goede).
- Silence missing prototype warnings in some places in the ACPI-related
code (Ammar Faizi).
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh).
- Correct spelling in firmware-guide/ACPI (Randy Dunlap).
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko).
* acpi-video:
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
* acpi-misc:
ACPI: make kobj_type structures constant
ACPI: Silence missing prototype warnings
* acpi-docs:
Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit
Documentation: firmware-guide/ACPI: correct spelling
The following warning:
Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst:92: ERROR: Unexpected indentation.
was introduced by commit 493a2c2d23. Fix it by placing everything in
the same paragraph and also use a monospace font.
Fixes: 493a2c2d23 ("Documentation/hw-vuln: Add documentation for Cross-Thread Return Predictions")
Reported-by: Stephen Rothwell <sfr@canb@auug.org.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Basic doc about Virtio on Linux and a short tutorial on Virtio drivers.
includes the following fixup:
virtio: fix virtio_config_ops kerneldocs
Fixes two warning messages when building htmldocs:
warning: duplicate section name 'Note'
warning: expecting prototype for virtio_config_ops().
Prototype was for vq_callback_t() instead
Message-Id: <20221010064359.1324353-2-ricardo.canuelo@collabora.com>
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20221220100035.2712449-1-ricardo.canuelo@collabora.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 5b4e9a7a71 ("net: ethtool: extend ringparam set/get APIs for rx_push")
added a new attr for configuring rx-push, right after tx-push.
Add it to the spec, the ring param operation is covered by
the otherwise sparse ethtool spec.
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230214043246.230518-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
Ever since RISC-V starting using generic arch topology code, the code
paths for cpu-capacity have been there but there's no binding defined to
actually convey the information. Defining the same property as used on
arm seems to be the only logical thing to do, so do it.
[Palmer: This is on top of the fix required to make it work, which
itself wasn't merged until late in the 6.2 cycle and thus pulls in
various other fixes.]
* b4-shazam-merge:
dt-bindings: riscv: add a capacity-dmips-mhz cpu property
dt-bindings: arm: move cpu-capacity to a shared loation
riscv: Move call to init_cpu_topology() to later initialization stage
riscv/kprobe: Fix instruction simulation of JALR
riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT
MAINTAINERS: add an IRC entry for RISC-V
RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2
dt-bindings: riscv: fix single letter canonical order
dt-bindings: riscv: fix underscore requirement for multi-letter extensions
riscv: uaccess: fix type of 0 variable on error in get_user()
riscv, kprobes: Stricter c.jr/c.jalr decoding
Link: https://lore.kernel.org/r/20230104180513.1379453-1-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since commit 03f11f03db ("RISC-V: Parse cpu topology during boot.")
RISC-V has used the generic arch topology code, which provides for
disparate CPU capacities. We never defined a binding to acquire this
information from the DT though, so document the one already used by the
generic arch topology code: "capacity-dmips-mhz".
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230104180513.1379453-3-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V uses the same generic topology code as arm64 & while there
currently exists no binding for cpu-capacity on RISC-V, the code paths
can be hit if the property is present.
Move the documentation of cpu-capacity to a shared location, ahead of
defining a binding for capacity-dmips-mhz on RISC-V. Update some
references to this document in the process.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20230104180513.1379453-2-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort E-Switch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
Example:
$ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \
cmode runtime
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chimera Linux is a Linux distribution from 2021 that builds its kernels
with Clang.
Google transitioned its data center fleet to run Clang built kernels in
2021, and Meta did so as well in 2022. Meta talked about this at LPC
2022 at a talk titled Kernel Live Patching at Scale.
These were important milestones for building the kernel with Clang.
Making note of them helps improve confidence in the project.
Reviewed-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Co-developed-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
IPQ8074 has one Gen2 and one Gen3 PCIe port, with Gen2 already supported.
Document Gen3 port which uses the same controller as IPQ6018.
Link: https://lore.kernel.org/r/20230113164449.906002-6-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Sort the compatibles list alphabetically for maintenance.
Link: https://lore.kernel.org/r/20230113164449.906002-5-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add bindings for two PCIe hosts on SM8350 platform. The only difference
between them is in the aggre0 clock, which warrants the oneOf clause for
the clocks properties.
Link: https://lore.kernel.org/r/20221118233242.2904088-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
qcom,perst-regs is an phandle array of one item with a phandle and its
arguments.
Link: https://lore.kernel.org/r/20221109113202.74406-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
MSM8996 and MSM8998 use the same clocks, so use one order to make the
binding simpler.
Link: https://lore.kernel.org/r/20230106081203.14118-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Add new compatible for MSM8998 (compatible with MSM8996) to allow further
customizing if needed and to accurately describe the hardware.
Link: https://lore.kernel.org/r/20230106081203.14118-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
predictions bug. When running in SMT mode and one of the sibling threads
transitions out of C0 state, the other thread gets access to twice as many
entries in the RSB, but unfortunately the predictions of the now-halted
logical processor are not purged. Therefore, the executing processor
could speculatively execute from locations that the now-halted processor
had trained the RSB on.
The Spectre v2 mitigations cover the Linux kernel, as it fills the RSB
when context switching to the idle thread. However, KVM allows a VMM to
prevent exiting guest mode when transitioning out of C0 using the
KVM_CAP_X86_DISABLE_EXITS capability can be used by a VMM to change this
behavior. To mitigate the cross-thread return address predictions bug,
a VMM must not be allowed to override the default behavior to intercept
C0 transitions.
These patches introduce a KVM module parameter that, if set, will prevent
the user from disabling the HLT, MWAIT and CSTATE exits.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPrvAAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMQAgf8CirL+yrngzQ+39UTFQgXj3IS1UyR
o2mF39w3bVlQhLNf5MBHF965FUeOV/8A16x73hJGjhiiuisphtQWS/6xKR6uYbq7
0Qi821skqN6XpRsWTWqFHMsdY+n0skr8QeXG4k/GJu7Ghb3tqs4eTGgnf2WBfI8/
K1UgTmjd9+ikM5gKZoVLpcqZnti0gx3lM+cvZGdfrIUaXB+i+hNd2NfRTiGsTOiK
fX7vZtLvOeje2TPoKLhzekTbh8kTU07HRWID9aVXT8bLy6Zd6tg2CHlv11noKpwv
DFVV+RsJ1SiAQYSwT+4IvWfIG4oq4onBQ972g2a27pP2cxF+38GXzt4NQw==
=xscg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Certain AMD processors are vulnerable to a cross-thread return address
predictions bug. When running in SMT mode and one of the sibling
threads transitions out of C0 state, the other thread gets access to
twice as many entries in the RSB, but unfortunately the predictions of
the now-halted logical processor are not purged. Therefore, the
executing processor could speculatively execute from locations that
the now-halted processor had trained the RSB on.
The Spectre v2 mitigations cover the Linux kernel, as it fills the RSB
when context switching to the idle thread. However, KVM allows a VMM
to prevent exiting guest mode when transitioning out of C0 using the
KVM_CAP_X86_DISABLE_EXITS capability can be used by a VMM to change
this behavior. To mitigate the cross-thread return address predictions
bug, a VMM must not be allowed to override the default behavior to
intercept C0 transitions.
These patches introduce a KVM module parameter that, if set, will
prevent the user from disabling the HLT, MWAIT and CSTATE exits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Documentation/hw-vuln: Add documentation for Cross-Thread Return Predictions
KVM: x86: Mitigate the cross-thread return address predictions bug
x86/speculation: Identify processors vulnerable to SMT RSB predictions
Convert Qualcomm G-Link RPM edge binding to DT schema. Move it to
remoteproc as it better suits the purpose - communication channel with
remote processor.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-6-krzysztof.kozlowski@linaro.org
Correct CDSP and MPSS power domains to match what is used in DTS and the
Linux driver:
sm8550-mtp.dtb: remoteproc@32300000: power-domain-names: ['cx', 'mxc', 'nsp'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: 084258d607 ("dt-bindings: remoteproc: qcom: adsp: document sm8550 adsp, cdsp & mpss compatible")
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206193313.30667-1-krzysztof.kozlowski@linaro.org
This documents the aDSP, cDSP and MPSS DSPs present
on the SM6115 SoC.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230128053504.2099620-2-bhupesh.sharma@linaro.org
Clarify the Explicit and Implicit meanings in the table of Pull Bias.
While at it, distinguish pull bias keywords used in ACPI by using bold
font in the table of the respective terms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add missing 'cache-unified' property in example for kryo OPP bindings
(Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Remove "select SRCU" (Paul E. McKenney).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmPrHiMACgkQ0rkcPK6B
EhwABg//XWuV52519bQzbFTJLy9ynY9gOwT383LPON6RwIfTBgzsZ294f+8ElFEs
6UHmWFiKuFjvtiGz2Qkz0/Cu/El5UClp/gvJWekTdY6XqrSi7YzzhsNgLDUXcjJi
9Vc/EoTU4B1Z3GNc002KqmuBSzbQ/mEWksKLK35Ajuicz7tirn2MK81lmLQ5z5r5
3vS3V/3IX45qYAhWXv8+5sXW14beQ87DueouEUCQm8hfY2My0Biu8tczqLqXR7di
6jmAxBTW9Q81NgmI8gfM6FzBeFnGdqdGOdqYWmKx5/GuQFh020xzl7G38yUROQso
k6v6Mg0o4HOXNGB+n9Iz3OLZg9F/EwrlRpUcWFqNNP0chWWlMfHc/BJgGlYV7NjB
FJaND/wzuzy9jBSJlpwHZZnk/tLDq5HEob+X0xP1MdZZzBYQJa7EXT9zUk4+MQdq
aFq5GY2TaDwbqM+tr9rnRPD5QayjF6kLfKvVKyCbM2Aqwnv0wugXEmskMcJNQqf7
G7qH0zdko76U3Vnvj31UWcPO2MGF6KTmvYmS4L4u0UDE6sRGDeMr8KIP5wQySpw3
7GDfea1R6XW8h2hqNs5PB5tCbOZ5yPLDAeWahj4Jlp4Ch0n++WLKCCesSJLQew1l
6B1rFi1FMIeA05L4lWRaxNTKe8MHX4fsn47+ufrDd7ewB0/6ai4=
=wSRZ
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP (Operating Performance Points) updates for 6.3 from Viresh
Kumar:
"- Add missing 'cache-unified' property in example for kryo OPP bindings
(Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Remove "select SRCU" (Paul E. McKenney).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)."
* tag 'opp-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array
drivers/opp: Remove "select SRCU"
dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
-----BEGIN PGP SIGNATURE-----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=dCgg
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq ARM updates for 6.3 from Viresh Kumar:
"- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi)."
* tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatibles
cpufreq: mediatek-hw: Register to module device table
cpufreq: tegra194: Enable CPUFREQ thermal cooling
Fixes in drivers for:
- Binding fix for g12a phys
- Kconfig operator precedence for TI driver
- renesas: register setting
- sunplus: null deref fix
- rockchip-inno fix for clk_disable_unprepare()
- MDM9607 init sequence revert due to regression
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmPKqp8ACgkQfBQHDyUj
g0c8QxAAlT17OSekO44/4j1ZPc1c0fvgf0CEDE6xrcfoD7taByuvFK7gm2NGYSaT
5RNYDniiMBDgchxHvy4BoEAXqrTbGLC6uFBlZ3BcEMM9ONFSU5t/J7YK0gH1WdSq
15Bp491XhWGVr3KlqAxgtatv7qgi0JS/mRmjXnN5ytIxETCqzPWwWvMtMRudQFTy
g3pydR1j4bTu/9yhBWfw6OIOnPVRTTmiEaqxUmahTCRld9YWvPLLJCCllZIh3YKS
kDF3UKDP0nRTPH7LqPlZtnOFdM0yq8lU8Wzt4Y+QVzTUr2OZ7+hCK03c/kVIA/5e
5tRValarw5hpZ0BfRAqhRIFFkh6K7ImqlMuuduZnDG8v/m7XKse7y2HaVOn9wDY8
l4FgrzJxSbfQzyPk3JYds+9tQezM1IGAc0FxarqY99NYMwHbqAHPs+W/Ft2tRY3W
ncG5j9YcGAdIZ/qa9/rY1Qdm9UOkzba9/bsi6ahQcW6QmtrmTtKgs2SKTpGOEnly
qwjmjKynVByZ8Kf3310lmhHm8TPs/vN0SAKbzh0VLacAcYmJMV9bN/E/DLzttkKP
lFx0GZ1WdyIlQaT/pXMGBPM2fux9oyNIKDn6sRmfe6ybx+I3e1UrHtgJa9HoyJet
iJQibehGdM+o+RP12lO97IsvzN1qHhfPkN144r/PZwK95UJsWDM=
=MDsZ
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes-6.2' into next
Merge fixes tag pulled into mainline by Linus into phy/next due to
dependency on amlogic patches
Convert spi-st-ssc.txt into st,ssc-spi.yaml for the
ST Microelectronics SSC SPI driver.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230213192349.17101-1-avolmat@me.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix inaccurate information about PHY muxing, and merge standalone and
multi-chip module MT7530 configuration methods.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230212131258.47551-1-arinc.unal@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enlarge opp-supported-hw maximum value. In recent SoC we started
matching more bit and we currently match mask of 112. The old maximum of
7 was good for old SoC that didn't had complex id, but now this is
limiting and we need to enlarge it to support more variants.
Document all the various mask that can be used and limit them to only
reasonable values instead of using a generic maximum limit.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The qcom-cpufreq-nvmem driver supports 2 kind of devices:
- pre-cpr that doesn't have power-domains and base everything on nvmem
cells and multiple named microvolt bindings.
Doesn't need required-opp binding in the opp nodes as they are only
used for genpd based devices.
- cpr-based that require power-domain in the cpu nodes and use various
source to decide the correct voltage and freq
Require required-opp binding since they need to be linked to the
related opp-level.
When the schema was introduced, it was wrongly set to always require these
binding but this is not the case for pre-cpr devices.
Make the power-domain and the required-opp optional and set them required
only for qcs404 based devices.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add additional info on what opp tables the defined devices in this schema
supports (operating-points-v2-kryo-cpu and operating-points-v2-qcom-level)
and reference them.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add a man page for the new rtla hwnoise tool, mostly based in the
rtla osnoise top.
Link: https://lkml.kernel.org/r/27088e0f42a6129e9b75f789d78adff4171f2e79.1675805361.git.bristot@kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It is difficult to intuit the semantics of owning and non-owning
references from verifier code. In order to keep the high-level details
from being lost in the mailing list, this patch adds documentation
explaining semantics and details.
The target audience of doc added in this patch is folks working on BPF
internals, as there's focus on "what should the verifier do here". Via
reorganization or copy-and-paste, much of the content can probably be
repurposed for BPF program writer audience as well.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-9-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Patch series "mm/damon: deprecate DAMON debugfs interface".
DAMON debugfs interface has announced to be deprecated after >v5.15 LTS
kernel is released. And v6.1.y has been announced to be an LTS[1].
Though the announcement was there for a while, some people might not have
noticed that so far. Also, some users could depend on it and have
problems at movng to the alternative (DAMON sysfs interface).
For such cases, keep the code and documents with warning messages and
contacts to ask helps for the deprecation.
[1] https://git.kernel.org/pub/scm/docs/kernel/website.git/commit/?id=332e9121320bc7461b2d3a79665caf153e51732c
This patch (of 3):
DAMON debugfs interface has announced to be deprecated after >v5.15 LTS
kernel is released. And, v6.1.y has announced to be an LTS[1].
Though the announcement was there for a while, some people might not
noticed that so far. Also, some users could depend on it and have
problems at movng to the alternative (DAMON sysfs interface).
For such cases, note DAMON debugfs interface as deprecated, and contacts
to ask helps on the document.
[1] https://git.kernel.org/pub/scm/docs/kernel/website.git/commit/?id=332e9121320bc7461b2d3a79665caf153e51732c
Link: https://lkml.kernel.org/r/20230209192009.7885-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230209192009.7885-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* kvm-arm64/nv-prefix:
: Preamble to NV support, courtesy of Marc Zyngier.
:
: This brings in a set of prerequisite patches for supporting nested
: virtualization in KVM/arm64. Of course, there is a long way to go until
: NV is actually enabled in KVM.
:
: - Introduce cpucap / vCPU feature flag to pivot the NV code on
:
: - Add support for EL2 vCPU register state
:
: - Basic nested exception handling
:
: - Hide unsupported features from the ID registers for NV-capable VMs
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
arm64: Add ARM64_HAS_NESTED_VIRT cpufeature
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
This pull request contains the following:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
-----BEGIN PGP SIGNATURE-----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=OWY2
-----END PGP SIGNATURE-----
Merge tag 'clocksource.2023.02.06b' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into timers/core
Pull clocksource watchdog changes from Paul McKenney:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
Link: https://lore.kernel.org/r/20230210193640.GA3325193@paulmck-ThinkPad-P17-Gen-1
ath.git patches for v6.3. Major changes:
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
The Marvell SD8978 (aka NXP IW416) uses identical registers as SD8987,
so reuse the existing mwifiex_reg_sd8987 definition.
Note that mwifiex_reg_sd8977 and mwifiex_reg_sd8997 are likewise
identical, save for the fw_dump_ctrl register: They define it as 0xf0
whereas mwifiex_reg_sd8987 defines it as 0xf9. I've verified that
0xf9 is the correct value on SD8978. NXP's out-of-tree driver uses
0xf9 for all of them, so there's a chance that 0xf0 is not correct
in the mwifiex_reg_sd8977 and mwifiex_reg_sd8997 definitions. I cannot
test that for lack of hardware, hence am leaving it as is.
NXP has only released a firmware which runs Bluetooth over UART.
Perhaps Bluetooth over SDIO is unsupported by this chipset.
Consequently, only an "sdiouart" firmware image is referenced, not an
alternative "sdsd" image.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/536b4f17a72ca460ad1b07045757043fb0778988.1674827105.git.lukas@wunner.de
Minor cleanups:
- Drop redundant blank lines,
- Correct indentaion in examples,
- Correct node names in examples to drop underscore and use generic
name.
No functional impact except adjusting to preferred coding style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230118175413.360153-1-krzysztof.kozlowski@linaro.org
Texts in numbered lists are rendered as continous paragraph when there
should have been breaks between first line text in the beginning of list
item and the description. Fix this by adding appropriate line breaks and
indent the rest of lines to match the first line of numbered list item.
Fixes: d6d71ee4a1 ("PM: Introduce Intel PowerClamp Driver")
Fixes: 6bbe6f5732 ("docs: thermal: convert to ReST")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kernel test robot reported htmldocs warning:
Documentation/admin-guide/thermal/intel_powerclamp.rst:328: WARNING: Inline emphasis start-string without end-string.
The mistaken asterisk in /proc/irq/*/smp_affinity is rendered as hyperlink
as the result.
Escape the asterisk to fix above warning.
Link: https://lore.kernel.org/linux-doc/202302122247.N4S791c4-lkp@intel.com/
Fixes: ebf5197102 ("thermal: intel: powerclamp: Add two module parameters")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The qcom_scm.h file is moved into firmware/qcom, to avoid having any
Qualcomm-specific files directly in include/linux.
Support for PMIC GLINK is introduced, which on newer Qualcomm platforms
provides an interface to the firmware implementing battery management
and USB Type-C handling. Together with the base driver comes the custom
altmode support driver.
SMD RPM gains support for IPQ9574, and socinfo is extended with support
for revision 17 of the information format and soc_id for IPQ5332 and
IPQ8064 are added.
The qcom_stats is changes not to fail when not all parts are
initialized.
-----BEGIN PGP SIGNATURE-----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=+KgT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8eLr
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for 6.3
The qcom_scm.h file is moved into firmware/qcom, to avoid having any
Qualcomm-specific files directly in include/linux.
Support for PMIC GLINK is introduced, which on newer Qualcomm platforms
provides an interface to the firmware implementing battery management
and USB Type-C handling. Together with the base driver comes the custom
altmode support driver.
SMD RPM gains support for IPQ9574, and socinfo is extended with support
for revision 17 of the information format and soc_id for IPQ5332 and
IPQ8064 are added.
The qcom_stats is changes not to fail when not all parts are
initialized.
* tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
soc: qcom: pmic_glink: Introduce base PMIC GLINK driver
dt-bindings: soc: qcom: Introduce PMIC GLINK binding
soc: qcom: dcc: Drop driver for now
Link: https://lore.kernel.org/r/20230210182242.2023901-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
-----BEGIN PGP SIGNATURE-----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=EWZ7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=B0bJ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Add wait-queue handling logic
dt-bindings: firmware: qcom,scm: Add optional interrupt
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Revert "soc: qcom: rpmpd: Add SM4250 support"
soc: qcom: socinfo: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add QRD board ID
soc: qcom: socinfo: Fix soc_id order
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
soc: qcom: ramp_controller: Make things static
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: power: qcom,rpmpd: document sa8775p
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
soc: qcom: dcc: rewrite description of dcc sysfs files
...
Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.
The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.
A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.
QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.
On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.
On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.
Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.
On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.
The firmware paths are corrected for the Sony Xperia Nagara platform.
The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.
gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.
-----BEGIN PGP SIGNATURE-----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=wSbI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nzqV
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM64 DT updates for 6.3
The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.
The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.
A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.
QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.
On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.
On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.
Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.
On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.
The firmware paths are corrected for the Sony Xperia Nagara platform.
The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.
gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.
* tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (81 commits)
arm64: dts: qcom: sc7280: Power herobrine's 3.3 eDP/TS rail more properly
arm64: dts: qcom: pmk8550: fix PON compatible
arm64: dts: qcom: sm8550: fix DSI controller compatible
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on villager
arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb
arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V
arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
arm64: dts: qcom: sm6115: correct TLMM gpio-ranges
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function
arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings
arm64: dts: qcom: sm6350: Use specific qmpphy compatible
arm64: dts: qcom: sm6115: Add smp2p nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
arm64: dts: qcom: sm6350: Add CCI nodes
arm64: dts: qcom: sm6350: Add camera clock controller
dt-bindings: clock: add QCOM SM6350 camera clock bindings
...
Link: https://lore.kernel.org/r/20230210192908.2039976-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Convert the Maxim Integrated MAX98095 audio codec bindings to DT schema.
Add missing sound-dai-cells during conversion.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230211134755.86061-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
T-Head C906/C910 CLINT is not compliant to SiFive ones (and even not
compliant to the newcoming ACLINT spec) because of lack of mtime
register.
Add a compatible string formatted like the C9xx-specific PLIC
compatible, and do not allow a SiFive one as fallback because they're
not really compliant.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230202072814.319903-1-uwu@icenowy.me
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add binding description for mediatek,mt8365-systimer
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230125143503.1015424-8-bero@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We add DT bindings for a separate RISC-V timer DT node which can
be used to describe implementation specific behaviour (such as
timer interrupt not triggered during non-retentive suspend).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-3-apatel@ventanamicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
The pseries platform can support dynamic secure boot (i.e. secure boot
using user-defined keys) using variables contained with the PowerVM LPAR
Platform KeyStore (PLPKS). Using the powerpc secvar API, expose the
relevant variables for pseries dynamic secure boot through the existing
secvar filesystem layout.
The relevant variables for dynamic secure boot are signed in the
keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall.
Object labels in the keystore are encoded using ucs2 format. With our
fixed variable names we don't have to care about encoding outside of the
necessary byte padding.
When a user writes to a variable, the first 8 bytes of data must contain
the signed update flags as defined by the hypervisor.
When a user reads a variable, the first 4 bytes of data contain the
policies defined for the object.
Limitations exist due to the underlying implementation of sysfs binary
attributes, as is the case for the OPAL secvar implementation -
partial writes are unsupported and writes cannot be larger than PAGE_SIZE.
(Even when using bin_attributes, which can be larger than a single page,
sysfs only gives us one page's worth of write buffer at a time, and the
hypervisor does not expose an interface for partial writes.)
Co-developed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Add NLS dependency to fix build errors, squash fix from ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-25-ajd@linux.ibm.com
Add description for new attributes added for rack manager switch and
NG800 family systems.
Attributes related to power converter board:
- reset_pwr_converter_fail;
- pwr_converter_prog_en;
Attributes related to External Root of Trust (EROT) devices recovery:
- erot1_ap_reset;
- erot2_ap_reset;
- erot1_recovery;
- erot2_recovery;
- erot1_reset;
- erot2_reset;
- erot1_wp;
- erot2_wp;
- spi_chnl_select;
Attributes related to clock board failures and recovery:
- clk_brd1_boot_fail;
- clk_brd2_boot_fail;
- clk_brd_fail;
- clk_brd_prog_en;
Attributes related to power failures:
- reset_ac_ok_fail;
- asic_pg_fail;
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-14-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Similar to what was done for TX_PUSH, add an RX_PUSH concept
to the ethtool interfaces.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Rothwell reported htmldocs warning when merging uml tree:
Documentation/rust/arch-support.rst:20: WARNING: Blank line required after table.
Fix the arch support table by removing extraneous simple table marker.
Link: https://lore.kernel.org/linux-next/20230213152714.78b844f4@canb.auug.org.au/
Fixes: 0438aadfa6 ("rust: arch/um: Add support for CONFIG_RUST under x86_64 UML")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
/proc/xen is a legacy pseudo filesystem which predates Xen support
getting merged into Linux. It has largely been replaced with more
normal locations for data (/sys/hypervisor/ for info, /dev/xen/ for
user devices). We want to compile xenfs support out of the dom0 kernel.
There is one item which only exists in /proc/xen, namely
/proc/xen/capabilities with "control_d" being the signal of "you're in
the control domain". This ultimately comes from the SIF flags provided
at VM start.
This patch exposes all SIF flags in /sys/hypervisor/start_flags/ as
boolean files, one for each bit, returning '1' if set, '0' otherwise.
Two known flags, 'privileged' and 'initdomain', are explicitly named,
and all remaining flags can be accessed via generically named files,
as suggested by Andrew Cooper.
Signed-off-by: Per Bilse <per.bilse@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230103130213.2129753-1-per.bilse@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
UniPhier I2C controller allows reset control support.
Add resets property to the controller as optional.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In some applications, the mtk-wdt requires the TOPRGU (Top Reset
Generation Unit) to reset timer after system resets. Add optional
mediatek,reset-by-toprgu property to enable it.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230117014023.2993-2-allen-kh.cheng@mediatek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add a new ARM64_HAS_NESTED_VIRT feature to indicate that the
CPU has the ARMv8.3 nested virtualization capability, together
with the 'kvm-arm.mode=nested' command line option.
This will be used to support nested virtualization in KVM.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: moved the command-line option to kvm-arm.mode]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add new kernel parameter cgroup.memory=nobpf to allow user disable bpf
memory accounting. This is a preparation for the followup patch.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Include the support for enumerating and provisioning ram regions for
v6.3. This also include a default policy change for ram / volatile
device-dax instances to assign them to the dax_kmem driver by default.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+bZrwAKCRDbK58LschI
gzi4AP4+TYo0jnSwwkrOoN9l4f5VO9X8osmj3CXfHBv7BGWVxAD/WnvA3TDZyaUd
agIZTkRs6BHF9He8oROypARZxTeMLwM=
=nO1C
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad2 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expand the region creation infrastructure to enable 'ram'
(volatile-memory) regions. The internals of create_pmem_region_store()
and create_pmem_region_show() are factored out into helpers
__create_region() and __create_region_show() for the 'ram' case to
reuse.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601995775.1924368.352616146815830591.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Shipping versions of the cxl-cli utility expect all regions to have a
'uuid' attribute. In preparation for 'ram' regions, update the 'uuid'
attribute to return an empty string which satisfies the current
expectations of 'cxl list -R'. Otherwise, 'cxl list -R' fails in the
presence of regions with the 'uuid' attribute missing. Force the
attribute to be read-only as there is no facility or expectation for a
'ram' region to recall its uuid from one boot to the next.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/167601994558.1924368.12612811533724694444.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for a new region type, "ram" regions, add a mode
attribute to clarify the mode of the decoders that can be added to a
region. Share the internals of mode_show() (for decoders) with the
region case.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601993930.1924368.4305018565539515665.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prior to Linus deciding that the kernel that following v5.19 would be
v6.0, the CXL ABI documentation already referenced v5.20. In preparation
for updating these entries update the kernel version to v6.0.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601993360.1924368.14122892663883462813.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Correct spelling problems for Documentation/isdn/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230209071400.31476-9-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the Loongson-2 clock binding with DT schema format using
json-schema.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221129034157.15036-4-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
CONFIG_RUST currently supports x86_64, but does not support it under
UML. With the previous patches applied, adding support is trivial:
add CONFIG_HAVE_RUST to UML if X86_64 is set.
The scripts/generate_rust_target.rs file already checks for
CONFIG_X86_64, not CONFIG_X86, so is prepared for UML support.
The Rust support does not currently support X86_32.
Also, update the Rust architecture support documentation to not that
this is being maintained: I intend to look after this as best I can.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Sergio González Collado <sergio.collado@gmail.com>
Tested-by: Sergio González Collado <sergio.collado@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
* arm64/for-next/perf:
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
perf: arm_spe: Support new SPEv1.2/v8.7 'not taken' event
perf: arm_spe: Use new PMSIDR_EL1 register enums
perf: arm_spe: Drop BIT() and use FIELD_GET/PREP accessors
arm64/sysreg: Convert SPE registers to automatic generation
arm64: Drop SYS_ from SPE register defines
perf: arm_spe: Use feature numbering for PMSEVFR_EL1 defines
perf/marvell: Add ACPI support to TAD uncore driver
perf/marvell: Add ACPI support to DDR uncore driver
perf/arm-cmn: Reset DTM_PMU_CONFIG at probe
drivers/perf: hisi: Extract initialization of "cpa_pmu->pmu"
drivers/perf: hisi: Simplify the parameters of hisi_pmu_init()
drivers/perf: hisi: Advertise the PERF_PMU_CAP_NO_EXCLUDE capability
* for-next/sysreg:
: arm64 sysreg and cpufeature fixes/updates
KVM: arm64: Use symbolic definition for ISR_EL1.A
arm64/sysreg: Add definition of ISR_EL1
arm64/sysreg: Add definition for ICC_NMIAR1_EL1
arm64/cpufeature: Remove 4 bit assumption in ARM64_FEATURE_MASK()
arm64/sysreg: Fix errors in 32 bit enumeration values
arm64/cpufeature: Fix field sign for DIT hwcap detection
* for-next/sme:
: SME-related updates
arm64/sme: Optimise SME exit on syscall entry
arm64/sme: Don't use streaming mode to probe the maximum SME VL
arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support
* for-next/kselftest: (23 commits)
: arm64 kselftest fixes and improvements
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZA
kselftest/arm64: Fix enumeration of systems without 128 bit SME
kselftest/arm64: Don't require FA64 for streaming SVE tests
kselftest/arm64: Limit the maximum VL we try to set via ptrace
kselftest/arm64: Correct buffer size for SME ZA storage
kselftest/arm64: Remove the local NUM_VL definition
kselftest/arm64: Verify simultaneous SSVE and ZA context generation
kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM set
kselftest/arm64: Remove spurious comment from MTE test Makefile
kselftest/arm64: Support build of MTE tests with clang
kselftest/arm64: Initialise current at build time in signal tests
kselftest/arm64: Don't pass headers to the compiler as source
kselftest/arm64: Remove redundant _start labels from FP tests
kselftest/arm64: Fix .pushsection for strings in FP tests
kselftest/arm64: Run BTI selftests on systems without BTI
kselftest/arm64: Fix test numbering when skipping tests
kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stress
kselftest/arm64: Only enumerate power of two VLs in syscall-abi
...
* for-next/misc:
: Miscellaneous arm64 updates
arm64/mm: Intercept pfn changes in set_pte_at()
Documentation: arm64: correct spelling
arm64: traps: attempt to dump all instructions
arm64: Apply dynamic shadow call stack patching in two passes
arm64: el2_setup.h: fix spelling typo in comments
arm64: Kconfig: fix spelling
arm64: cpufeature: Use kstrtobool() instead of strtobool()
arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path
arm64: make ARCH_FORCE_MAX_ORDER selectable
* for-next/sme2: (23 commits)
: Support for arm64 SME 2 and 2.1
arm64/sme: Fix __finalise_el2 SMEver check
kselftest/arm64: Remove redundant _start labels from zt-test
kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps
kselftest/arm64: Add coverage of the ZT ptrace regset
kselftest/arm64: Add SME2 coverage to syscall-abi
kselftest/arm64: Add test coverage for ZT register signal frames
kselftest/arm64: Teach the generic signal context validation about ZT
kselftest/arm64: Enumerate SME2 in the signal test utility code
kselftest/arm64: Cover ZT in the FP stress test
kselftest/arm64: Add a stress test program for ZT0
arm64/sme: Add hwcaps for SME 2 and 2.1 features
arm64/sme: Implement ZT0 ptrace support
arm64/sme: Implement signal handling for ZT
arm64/sme: Implement context switching for ZT0
arm64/sme: Provide storage for ZT0
arm64/sme: Add basic enumeration for SME2
arm64/sme: Enable host kernel to access ZT0
arm64/sme: Manually encode ZT0 load and store instructions
arm64/esr: Document ISS for ZT0 being disabled
arm64/sme: Document SME 2 and SME 2.1 ABI
...
* for-next/tpidr2:
: Include TPIDR2 in the signal context
kselftest/arm64: Add test case for TPIDR2 signal frame records
kselftest/arm64: Add TPIDR2 to the set of known signal context records
arm64/signal: Include TPIDR2 in the signal context
arm64/sme: Document ABI for TPIDR2 signal information
* for-next/scs:
: arm64: harden shadow call stack pointer handling
arm64: Stash shadow stack pointer in the task struct on interrupt
arm64: Always load shadow stack pointer directly from the task struct
* for-next/compat-hwcap:
: arm64: Expose compat ARMv8 AArch32 features (HWCAPs)
arm64: Add compat hwcap SSBS
arm64: Add compat hwcap SB
arm64: Add compat hwcap I8MM
arm64: Add compat hwcap ASIMDBF16
arm64: Add compat hwcap ASIMDFHM
arm64: Add compat hwcap ASIMDDP
arm64: Add compat hwcap FPHP and ASIMDHP
* for-next/ftrace:
: Add arm64 support for DYNAMICE_FTRACE_WITH_CALL_OPS
arm64: avoid executing padding bytes during kexec / hibernation
arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
arm64: ftrace: Update stale comment
arm64: patching: Add aarch64_insn_write_literal_u64()
arm64: insn: Add helpers for BTI
arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT
ACPI: Don't build ACPICA with '-Os'
Compiler attributes: GCC cold function alignment workarounds
ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS
* for-next/efi-boot-mmu-on:
: Permit arm64 EFI boot with MMU and caches on
arm64: kprobes: Drop ID map text from kprobes blacklist
arm64: head: Switch endianness before populating the ID map
efi: arm64: enter with MMU and caches enabled
arm64: head: Clean the ID map and the HYP text to the PoC if needed
arm64: head: avoid cache invalidation when entering with the MMU on
arm64: head: record the MMU state at primary entry
arm64: kernel: move identity map out of .text mapping
arm64: head: Move all finalise_el2 calls to after __enable_mmu
* for-next/ptrauth:
: arm64 pointer authentication cleanup
arm64: pauth: don't sign leaf functions
arm64: unify asm-arch manipulation
* for-next/pseudo-nmi:
: Pseudo-NMI code generation optimisations
arm64: irqflags: use alternative branches for pseudo-NMI logic
arm64: add ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap
arm64: make ARM64_HAS_GIC_PRIO_MASKING depend on ARM64_HAS_GIC_CPUIF_SYSREGS
arm64: rename ARM64_HAS_IRQ_PRIO_MASKING to ARM64_HAS_GIC_PRIO_MASKING
arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGS
Add the SM8550 compatible to the list.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-4-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SM8550 SoC uses Synopsis eUSB2 PHY. Add a dt-binding schema
for the new driver.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-2-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the QMP PCIe PHY compatible for SM8550.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-2-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the admin guide for the Cross-Thread Return Predictions vulnerability.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <60f9c0b4396956ce70499ae180cb548720b25c7e.1675956146.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change kernel version from 5.20 to 6.0, as 5.20 is not a release.
Signed-off-by: Meadhbh Fitzpatrick <meadhbh.fitzpatrick@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cleanup examples:
- use 4-space indentation (for cases when it is neither 4 not 2 space),
- use lowercase hex,
- drop unused node's label.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230124081117.31186-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
xfs will not allow combining other panic masks with
XFS_PTAG_VERIFIER_ERROR.
# sysctl fs.xfs.panic_mask=511
sysctl: setting key "fs.xfs.panic_mask": Invalid argument
fs.xfs.panic_mask = 511
Update to the maximum value that can be set to allow the full range of
masks. Do this using a mask of possible values to prevent this happening
again as suggested by Darrick.
Fixes: d519da41e2 ("xfs: Introduce XFS_PTAG_VERIFIER_ERROR panic mask")
Signed-off-by: Donald Douwsma <ddouwsma@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If RPS is enabled, this allows configuring a default rps
mask, which is effective since receive queue creation time.
A default RPS mask allows the system admin to ensure proper
isolation, avoiding races at network namespace or device
creation time.
The default RPS mask is initially empty, and can be
modified via a newly added sysctl entry.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTC in the JZ4770 is compatible with the JZ4760, but has an extra
register that permits to configure the behaviour of the CLK32K pin. The
same goes for the RTC in the JZ4780.
With this change, the RTC node is now also a clock provider on these
SoCs, so a #clock-cells property is added.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230129120442.22858-2-paul@crapouillou.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
MOXA ART RTC driver has been switched to gpiod API and is now using
properly named properties for its gpios (with gpiolib implementing a
quirk to recognize legacy names). Change binding document to use
proper names as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20230201054815.4112632-2-dmitry.torokhov@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Instead of "oneOf:" choices, use "allOf:" and "if:" to define reg, clocks,
resets, and their names that can be taken by the compatible string.
The order of their names doesn't change here.
Link: https://lore.kernel.org/r/20221223070713.20549-2-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
In some use cases, it is desirable to only inject idle on certain set
of CPUs. For example on Alder Lake systems, it is possible that we force
idle only on P-Cores for thermal reasons. Also the idle percent can be
more than 50% if we only choose partial set of CPUs in the system.
Introduce 2 new module parameters for this purpose. They can be only
changed when the cooling device is inactive.
cpumask (Read/Write): A bit mask of CPUs to inject idle. The format of
this bitmask is same as used in other subsystems like in
/proc/irq/*/smp_affinity. The mask is comma separated 32 bit groups.
Each CPU is one bit. For example for 256 CPU system the full mask is:
ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff
The rightmost mask is for CPU 0-32.
max_idle (Read/Write): Maximum injected idle time to the total CPU time
ratio in percent range from 1 to 100. Even if the cooling device max_state
is always 100 (100%), this parameter allows to add a max idle percent
limit. The default is 50, to match the current implementation of powerclamp
driver. Also doesn't allow value more than 75, if the cpumask includes
every CPU present in the system.
Also when the cpumask doesn't include every CPU, there is no use of
compensation using package C-state idle counters. Hence don't start
package C-state polling thread even for a single package or a single die
system in this case.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Create a folder "thermal" under Documentation/admin-guide and move
intel_powerclamp documentation to this folder.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge series from Xiangsheng Hou <xiangsheng.hou@mediatek.com>:
This patch series split from bellow series which pick-up spi relevant patches
https://lore.kernel.org/all/20230130030656.12127-1-xiangsheng.hou@mediatek.com.
This series add MediaTek MT7986 SPI NAND controller support, add read latch
latency, smaple delay adjust and add optional nfi_hclk.
this imports the latest vfio_device_ops definition to vfio.rst.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230209081210.141372-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Merge series from Herve Codina <herve.codina@bootlin.com>:
The Infineon PEB2466 codec is a programmable DSP-based four channels
codec with filters capabilities.
It also provides signals as GPIOs.
ipsec subtrees
Current release - regressions:
- sched: fix off by one in htb_activate_prios()
- eth: mana: fix accessing freed irq affinity_hint
- eth: ice: fix out-of-bounds KASAN warning in virtchnl
Current release - new code bugs:
- eth: mtk_eth_soc: enable special tag when any MAC uses DSA
Previous releases - always broken:
- core: fix sk->sk_txrehash default
- neigh: make sure used and confirmed times are valid
- mptcp: be careful on subflow status propagation on errors
- xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr()
- phylink: move phy_device_free() to correctly release phy device
- eth: mlx5:
- fix crash unsetting rx-vlan-filter in switchdev mode
- fix hang on firmware reset
- serialize module cleanup with reload and remove
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=sJO+
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and ipsec subtrees.
Current release - regressions:
- sched: fix off by one in htb_activate_prios()
- eth: mana: fix accessing freed irq affinity_hint
- eth: ice: fix out-of-bounds KASAN warning in virtchnl
Current release - new code bugs:
- eth: mtk_eth_soc: enable special tag when any MAC uses DSA
Previous releases - always broken:
- core: fix sk->sk_txrehash default
- neigh: make sure used and confirmed times are valid
- mptcp: be careful on subflow status propagation on errors
- xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr()
- phylink: move phy_device_free() to correctly release phy device
- eth: mlx5:
- fix crash unsetting rx-vlan-filter in switchdev mode
- fix hang on firmware reset
- serialize module cleanup with reload and remove"
* tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
selftests: forwarding: lib: quote the sysctl values
net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used
rds: rds_rm_zerocopy_callback() use list_first_entry()
net: txgbe: Update support email address
selftests: Fix failing VXLAN VNI filtering test
selftests: mptcp: stop tests earlier
selftests: mptcp: allow more slack for slow test-case
mptcp: be careful on subflow status propagation on errors
mptcp: fix locking for in-kernel listener creation
mptcp: fix locking for setsockopt corner-case
mptcp: do not wait for bare sockets' timeout
net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0
nfp: ethtool: fix the bug of setting unsupported port speed
txhash: fix sk->sk_txrehash default
net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg()
net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA
net: sched: sch: Fix off by one in htb_activate_prios()
igc: Add ndo_tx_timeout support
net: mana: Fix accessing freed irq affinity_hint
hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC
...
Add mediatek,rx-latch-latency-ns property which adjust data read
latch latency in the unit of nanoseconds.
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230201020921.26712-6-xiangsheng.hou@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dt-bindings documentation of SPI NAND controller
for MediaTek MT7986 SoC platform. And add optional
nfi_hclk property which is needed for MT7986.
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230201020921.26712-4-xiangsheng.hou@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The WCD9340 audio codec appears on Slimbus twice: as IFD device without
properties and the actual audio-codec referencing the former via
wcd9340_ifd. Allow in the binding both versions to fix several warnings
like:
sdm850-samsung-w737.dtb: ifd@0,0: 'reset-gpios' is a required property
sdm850-samsung-w737.dtb: ifd@0,0: 'slim-ifc-dev' is a required property
sdm850-samsung-w737.dtb: ifd@0,0: 'interrupt-controller' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230206180805.6621-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The "slim-ifc-dev" property should not be just "true", because it allows
any type.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230206180805.6621-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reference common DAI properties to fix:
sdm845-db845c.dtb: speaker@0,1: 'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230206180805.6621-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Infineon PEB2466 codec is a programmable DSP-based four channels
codec with filters capabilities.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230206144904.91078-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new Broadcom Broadband BCMBCA SoCs includes a updated HSSPI
controller. Add new compatible strings to differentiate the old and new
controller while keeping MIPS based chip with the old compatible. Update
property requirements for these two revisions of the controller. Also
add myself and Kursad as the maintainers.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230207065826.285013-3-william.zhang@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the preparation for updates on the bcm63xx hsspi driver. Convert
the text based bindings to json-schema per new dts requirement.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230207065826.285013-2-william.zhang@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The goodix i2c-hid bindings currently support two models of
touchscreen: GT7375P and GT7986U. The datasheets of both touchscreens
show the following things:
* The mainboard that the touchscreen is connected to is only expected
to supply one voltage to the touchscreen: 3.3V.
* The touchscreen, depending on stuffing options, can accept IO to the
touchscreen as either 3.3V or 1.8V. Presumably this means that the
touchscreen has its own way internally to make or deal with 1.8V
signals when it's configured for 1.8V IO.
NOTE: you've got to look very carefully at the datasheet for the
touchscreen to see that the above bullets are true. Specifically, the
datasheet shows a signal called VDDIO and one might think that this is
where a mainboard would provide VDDIO to the touchscreen. Upon closer
inspection, however, a footnote can be found that says "When VDDIO is
left floating, the logic level is 1.8V [...]; when VDDIO is connected
to AVDD, the logic level is AVDD.". Thus the VDDIO pin on the
touchscreen IC is actually a selector and not a pin whre the mainboard
would pass a reference voltage.
The fact that the touchscreen isn't supplied 1.8V by the mainboard
means that when I originally submitted bindings for these touchscreens
I only listed the 3.3V rail in the bindings. It can be noted that the
original bindings and driver were added for sc7180-trogdor boards and
these boards all use 3.3V IO via a level shifter on the mainboard.
It turns out that with sc7280-herobrine-evoker, we've got a bit of a
strange monkey on our hands. Due to some very interesting but
(unfortunately) set-in-stone hardware design, we are doing 1.8V IO to
the touchscreen but we _also_ have some extra buffers on the mainboard
that need to be powered up to make the IO lines work. After much
pondering about this, it seems like the best way to handle this is to
add an optional "mainboard-vddio" rail to the bindings that is used to
power up the buffers. Specifically, the fact that the touchscreen
datasheet documents that its IOs can be at a different voltage level
than its main power rail means that there truly are two voltage rails
associated with the touchscreen, even if we don't actually provide the
IO rail to it. Thus it doesn't feel absurd for the DT node on the host
to have a 1.8V rail to power up anything related to its 1.8V logic.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230206184744.5.Ia77a96c6c5564f9cc25e6220b5a9171d5c2639e8@changeid
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
It contains:
- cleanups arround flexcom nodes on SAM9X60 SoC as follows:
- preserve same ID for flexcoms and the embedded nodes (e.g. flx4
will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3);
- SoC specific bindings were moved from board specific file to SoC
specific file
- DMA bindings for all flexcom nodes were added
- SoC file was filled with missing flexcom nodes
- new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard
interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN
interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface,
1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power
regulators, UART and JTAG connectors
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCY+N5WwAKCRCejrg/N2X7
/QIbAQCQ5aARiG6B3IglSdVTQk8a+CRWpelxB9CMCXEohhRkhgD+JS6XRejjoF78
cj3J30OP1SnkZQtTOygxEtmaxEMHNw0=
=gcby
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Oe5O
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 device tree updates for 6.3 #2
It contains:
- cleanups arround flexcom nodes on SAM9X60 SoC as follows:
- preserve same ID for flexcoms and the embedded nodes (e.g. flx4
will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3);
- SoC specific bindings were moved from board specific file to SoC
specific file
- DMA bindings for all flexcom nodes were added
- SoC file was filled with missing flexcom nodes
- new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard
interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN
interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface,
1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power
regulators, UART and JTAG connectors
* tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board
dt-bindings: arm: at91: Add info on sam9x60 curiosity
ARM: dts: at91: sam9x60: Add missing flexcom definitions
ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes
ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
ARM: dts: at91: sam9x60: fix spi4 node
ARM: dts: at91: sam9x60: move flexcom definitions
ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions
Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 0c559bc8ab ("dt-bindings: serial: restrict possible child node
names") exposed the Allwinner D1 devicetrees as users of unevaluated
properties, with a slew of similar warnings now appearing during
dtbs_check:
sun20i-d1-nezha.dtb: serial@2500400: Unevaluated properties are not allowed ('dma-names', 'dmas' were unexpected)
Document the missing properties.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230208171715.70862-1-conor@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the G12A USB complex, the USB3 PHY is shared with the PCIe controller,
thus on designs without PCIe enabled the USB3 PHY entry can be ommited from
the PHY list.
Fixes: cdff2c946f ("dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic AXG Families USB Glue Bindings")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207-b4-amlogic-g12a-usb-ctrl-bindings-fix-v1-1-c310293da7a2@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add device tree bindings for camera clock controller for
Qualcomm Technology Inc's SM6350 SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org
The GPU clock controller bindings for the Qualcomm sm8350 platform are
not correct. The driver uses .fw_name instead of using indices to bind
parent clocks, thus demanding the clock-names usage. With the proper
clock-names in place, the bindings becomes equal to the bindings defined
by qcom,gpucc.yaml, so it is impractical to keep them in a separate
file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206145707.122937-2-dmitry.baryshkov@linaro.org
Document the compatible string for the UFS found on SM8550.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MSM8996 Core Bus Fabric (CBF) clock controller clocks an interconnect
between two CPU clusters. The CBF clock should follow the CPU
frequencies to provide enough bandwidth between clusters. Thus a single
driver implements both a clock and an interconnect to set the clock
rate.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120061417.2623751-2-dmitry.baryshkov@linaro.org
Document the new thwc,uf896/ufi001c device tree bindings used in their device
trees.
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Shenzhen Tong Heng Wei Chuang Technology Co., Ltd. (hereinafter referred
to as "Tong Heng Wei Chuang") is a focus on wireless communications
equipment brand manufacturers.
Link: http://www.szthwc.com/en/about.html
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Added a new page (functionredirection.rst) that describes the Function
Redirection (static stubbing) API. This page will be expanded if we add,
for example, ftrace-based stubbing.
In addition,
1. Updated the api/index.rst page to create an entry for function
redirection api
2. Updated the toctree to be hidden, reducing redundancy on the
generated page.
Signed-off-by: Sadiya Kazi <sadiyakazi@google.com>
Co-developed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit has several macros and functions intended for use from non-test
code. These hooks, currently the kunit_get_current_test() and
kunit_fail_current_test() macros, didn't work when CONFIG_KUNIT=m.
In order to support this case, the required functions and static data
need to be available unconditionally, even when KUnit itself is not
built-in. The new 'hooks.c' file is therefore always included, and has
both the static key required for kunit_get_current_test(), and a table
of function pointers in struct kunit_hooks_table. This is filled in with
the real implementations by kunit_install_hooks(), which is kept in
hooks-impl.h and called when the kunit module is loaded.
This can be extended for future features which require similar
"hook" behaviour, such as static stubs, by simply adding new entries to
the struct, and the appropriate code to set them.
Fixed white-space errors during commit:
Shuah Khan <skhan@linuxfoundation.org>
Resolved merge conflicts with:
db105c37a4 ("kunit: Export kunit_running()")
This patch supersedes the above.
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a new sidebar template that creates a more RTD-like "fisheye" view of
the current place in the document hierarchy. It is far from ideal, but
some readers may find it better for navigating through the documentation as
a whole.
Add some CSS trickery as well to make the table of contents less intrusive
when viewing the pages on a small screen.
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Reviewed-by: David Gow <davidgow@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add explanation about use of "u64", "u32", etc. as
the type convention used in BPF documentation.
Signed-off-by: Dave Thaler <dthaler@microsoft.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230127014706.1005-1-dthaler1968@googlemail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cong pointed out that there are some inconsistencies between the BPF design
QA and the lifecycle expectations documentation we added for kfuncs. Let's
update the QA file to be consistent with the kfunc docs, and add references
where it makes sense. Also document that modules may export kfuncs now.
v3:
- Grammar nit + ack from David
v2:
- Fix repeated word (s/defined defined/defined/)
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230208164143.286392-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert the DT binding documentation for the Amlogic axg sound card to
schema.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230208093520.52843-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Several minor cleanups and fixes on Qualcomm pin controller Devicetree
bindings - add missing input-disable, correct GPIO pin name patterns in
bindings, correct number of GPIOs in gpio-ranges property.
-----BEGIN PGP SIGNATURE-----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=VNb/
-----END PGP SIGNATURE-----
Merge tag 'qcom-pinctrl-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel
Qualcomm pinctrl Devicetree bindings changes for v6.3, part two
Several minor cleanups and fixes on Qualcomm pin controller Devicetree
bindings - add missing input-disable, correct GPIO pin name patterns in
bindings, correct number of GPIOs in gpio-ranges property.
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPgG/geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGidAH/j0pUbmniNM3aft8
5O1XxltlOZgqxju8OQhkiuX9VnQuuSeTNhAuj6jfcQOLpXDvlKsVfrpBxEfXalML
yead9QAy/OT3hNGQxifMQzGbsmaWH1kgxxnv2lKo2eNP5KYZ+rec+IgtQhgX9quN
q/N/ymd2/ju9AEOVRYwG1PD1EiIwTd3xPfBZl4Z35J+Ym+6NRrlXmN6J9LwslXmJ
/P4cwgdf9/TuYAB96EshRHsZ4Tk/Gxkn15uyhLaWBmrZ/LAF5JGbClEfFlCWgjwv
F5SGv3F+O6HSv49W9a24XtenE+3tw78AbCdqKZyzbb2whhv1eY99vKSbGnCahc/y
O0VBP/g=
=YoPk
-----END PGP SIGNATURE-----
Merge tag 'v6.2-rc7' into media_tree
Linux 6.2-rc7
* tag 'v6.2-rc7': (1549 commits)
Linux 6.2-rc7
fbcon: Check font dimension limits
efi: fix potential NULL deref in efi_mem_reserve_persistent
kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
HV: hv_balloon: fix memory leak with using debugfs_lookup()
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
efi: Accept version 2 of memory attributes table
ceph: blocklist the kclient when receiving corrupted snap trace
ceph: move mount state enum to super.h
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
...
Add the missing properties as compatible, reg, sound-dai-cells.
And then check this file using 'make dt_binding_check'.
Signed-off-by: Kiseok Jo <kiseok.jo@irondevice.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230208092420.5037-8-kiseok.jo@irondevice.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The lan8841 has the same bindings as ksz9131, so just reuse the entire
section of ksz9131.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds