Commit Graph

246 Commits

Author SHA1 Message Date
Jing Xiangfeng 85094c05ee rapidio: fix the missed put_device() for rio_mport_add_riodev
rio_mport_add_riodev() misses to call put_device() when the device already
exists.  Add the missed function call to fix it.

Fixes: e8de370188 ("rapidio: add mport char device driver")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lkml.kernel.org/r/20200922072525.42330-1-jingxiangfeng@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:22 -07:00
Souptick Joarder fa63f083b3 rapidio: fix error handling path
rio_dma_transfer() attempts to clamp the return value of
pin_user_pages_fast() to be >= 0.  However, the attempt fails because
nr_pages is overridden a few lines later, and restored to the undesirable
-ERRNO value.

The return value is ultimately stored in nr_pages, which in turn is passed
to unpin_user_pages(), which expects nr_pages >= 0, else, disaster.

Fix this by fixing the nesting of the assignment to nr_pages: nr_pages
should be clamped to zero if pin_user_pages_fast() returns -ERRNO, or set
to the return value of pin_user_pages_fast(), otherwise.

[jhubbard@nvidia.com: new changelog]

Fixes: e8de370188 ("rapidio: add mport char device driver")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lkml.kernel.org/r/1600227737-20785-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:22 -07:00
Laurent Pinchart d2b8610024 rapidio: Replace 'select' DMAENGINES 'with depends on'
Enabling a whole subsystem from a single driver 'select' is frowned
upon and won't be accepted in new drivers, that need to use 'depends on'
instead. Existing selection of DMAENGINES will then cause circular
dependencies. Replace them with a dependency.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
2020-09-05 19:52:54 +03:00
Gustavo A. R. Silva df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Gustavo A. R. Silva d71375499d rapidio/rio_mport_cdev: use array_size() helper in copy_{from,to}_user()
Use array_size() helper instead of the open-coded version in
copy_{from,to}_user().  These sorts of multiplication factors need to be
wrapped in array_size().

This issue was found with the help of Coccinelle and, audited and fixed
manually.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Link: http://lkml.kernel.org/r/20200616183050.GA31840@embeddedor
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:01 -07:00
Gustavo A. R. Silva 330d558960 drivers/rapidio/rio-scan.c: use struct_size() helper
Make use of the struct_size() helper instead of an open-coded version in
order to avoid any potential type mistakes.

Also, while there, use the preferred form for passing a size of a struct.
The alternative form where struct name is spelled out hurts readability
and introduces an opportunity for a bug when the pointer variable type is
changed but the corresponding sizeof that is passed as argument is not.

This issue was found with the help of Coccinelle and, audited and fixed
manually.

Addresses KSPP ID: https://github.com/KSPP/linux/issues/83

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Link: http://lkml.kernel.org/r/20200619170445.GA22641@embeddedor
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:01 -07:00
Gustavo A. R. Silva 216ec27f3c drivers/rapidio/devices/rio_mport_cdev.c: use struct_size() helper
Make use of the struct_size() helper instead of an open-coded version in
order to avoid any potential type mistakes.

This issue was found with the help of Coccinelle and, audited and fixed
manually.

Addresses KSPP ID: https://github.com/KSPP/linux/issues/83

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Link: http://lkml.kernel.org/r/20200619170843.GA24923@embeddedor
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:01 -07:00
Gustavo A. R. Silva a611d137bf rapidio: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-15 23:08:32 -05:00
Masahiro Yamada a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
John Hubbard 67446283d8 rapidio: convert get_user_pages() --> pin_user_pages()
This code was using get_user_pages_fast(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1].  That means that it's time
to convert the get_user_pages_fast() + put_page() calls to
pin_user_pages_fast() + unpin_user_pages() calls.

There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.

[1] Documentation/core-api/pin_user_pages.rst

[2] "Explicit pinning of user-space pages":
    https://lwn.net/Articles/807108/

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://lkml.kernel.org/r/20200517235620.205225-3-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:26 -07:00
Madhuparna Bhowmik e1c3cdb26a rapidio: avoid data race between file operation callbacks and mport_cdev_add().
Fields of md(mport_dev) are set after cdev_device_add().  However, the
file operation callbacks can be called after cdev_device_add() and
therefore accesses to fields of md in the callbacks can race with the rest
of the mport_cdev_add() function.

One such example is INIT_LIST_HEAD(&md->portwrites) in mport_cdev_add(),
the list is initialised after cdev_device_add().  This can race with
list_add_tail(&pw_filter->md_node,&md->portwrites) in
rio_mport_add_pw_filter() which is called by unlocked_ioctl.

To avoid such data races use cdev_device_add() after initializing md.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Pavel Andrianov <andrianov@ispras.ru>
Link: http://lkml.kernel.org/r/20200426112950.1803-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:26 -07:00
John Hubbard ffca476a0a rapidio: fix an error in get_user_pages_fast() error handling
In the case of get_user_pages_fast() returning fewer pages than
requested, rio_dma_transfer() does not quite do the right thing.  It
attempts to release all the pages that were requested, rather than just
the pages that were pinned.

Fix the error handling so that only the pages that were successfully
pinned are released.

Fixes: e8de370188 ("rapidio: add mport char device driver")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200517235620.205225-2-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-23 10:26:31 -07:00
Ben Dooks (Codethink) bd7bca4335 drivers/rapidio/rio-access.c: fix missing include of <linux/rio_drv.h>
Include <linux/rio_drv.h> for the missing declarations of functions
exported from this file.  Fixes the following sparse warnings:

  drivers/rapidio/rio-access.c:59:1: warning: symbol '__rio_local_read_config_8' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:60:1: warning: symbol '__rio_local_read_config_16' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:61:1: warning: symbol '__rio_local_read_config_32' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:62:1: warning: symbol '__rio_local_write_config_8' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:63:1: warning: symbol '__rio_local_write_config_16' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:64:1: warning: symbol '__rio_local_write_config_32' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:112:1: warning: symbol 'rio_mport_read_config_8' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:113:1: warning: symbol 'rio_mport_read_config_16' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:114:1: warning: symbol 'rio_mport_read_config_32' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:115:1: warning: symbol 'rio_mport_write_config_8' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:116:1: warning: symbol 'rio_mport_write_config_16' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:117:1: warning: symbol 'rio_mport_write_config_32' was not declared. Should it be static?
  drivers/rapidio/rio-access.c:136:5: warning: symbol 'rio_mport_send_doorbell' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20191017115103.684-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04 19:44:13 -08:00
Ben Dooks (Codethink) 48d6b4dd36 drivers/rapidio/rio-driver.c: fix missing include of <linux/rio_drv.h>
Include <linux/rio_drv.h> for the missing declarations of functions
exported from this file.  Fixes the following sparse warnings:

  drivers/rapidio/rio-driver.c:53:16: warning: symbol 'rio_dev_get' was not declared. Should it be static?
  drivers/rapidio/rio-driver.c:70:6: warning: symbol 'rio_dev_put' was not declared. Should it be static?
  drivers/rapidio/rio-driver.c:150:5: warning: symbol 'rio_register_driver' was not declared. Should it be static?
  drivers/rapidio/rio-driver.c:169:6: warning: symbol 'rio_unregister_driver' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20191017114923.10888-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04 19:44:13 -08:00
Denis Efremov c9c13ba428 PCI: Add PCI_STD_NUM_BARS for the number of standard BARs
Code that iterates over all standard PCI BARs typically uses
PCI_STD_RESOURCE_END.  However, that requires the unusual test
"i <= PCI_STD_RESOURCE_END" rather than something the typical
"i < PCI_STD_NUM_BARS".

Add a definition for PCI_STD_NUM_BARS and change loops to use the more
idiomatic C style to help avoid fencepost errors.

Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>			# arch/s390/
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>	# video/fbdev/
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>	# pci/controller/dwc/
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>		# scsi/pm8001/
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>	# scsi/pm8001/
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>			# memstick/
2019-10-14 10:22:26 -05:00
Linus Torvalds 57a8ec387e Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
 "VM:
   - z3fold fixes and enhancements by Henry Burns and Vitaly Wool

   - more accurate reclaimed slab caches calculations by Yafang Shao

   - fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by
     Christoph Hellwig

   - !CONFIG_MMU fixes by Christoph Hellwig

   - new novmcoredd parameter to omit device dumps from vmcore, by
     Kairui Song

   - new test_meminit module for testing heap and pagealloc
     initialization, by Alexander Potapenko

   - ioremap improvements for huge mappings, by Anshuman Khandual

   - generalize kprobe page fault handling, by Anshuman Khandual

   - device-dax hotplug fixes and improvements, by Pavel Tatashin

   - enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V

   - add pte_devmap() support for arm64, by Robin Murphy

   - unify locked_vm accounting with a helper, by Daniel Jordan

   - several misc fixes

  core/lib:
   - new typeof_member() macro including some users, by Alexey Dobriyan

   - make BIT() and GENMASK() available in asm, by Masahiro Yamada

   - changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better
     code generation, by Alexey Dobriyan

   - rbtree code size optimizations, by Michel Lespinasse

   - convert struct pid count to refcount_t, by Joel Fernandes

  get_maintainer.pl:
   - add --no-moderated switch to skip moderated ML's, by Joe Perches

  misc:
   - ptrace PTRACE_GET_SYSCALL_INFO interface

   - coda updates

   - gdb scripts, various"

[ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
  fs/select.c: use struct_size() in kmalloc()
  mm: add account_locked_vm utility function
  arm64: mm: implement pte_devmap support
  mm: introduce ARCH_HAS_PTE_DEVMAP
  mm: clean up is_device_*_page() definitions
  mm/mmap: move common defines to mman-common.h
  mm: move MAP_SYNC to asm-generic/mman-common.h
  device-dax: "Hotremove" persistent memory that is used like normal RAM
  mm/hotplug: make remove_memory() interface usable
  device-dax: fix memory and resource leak if hotplug fails
  include/linux/lz4.h: fix spelling and copy-paste errors in documentation
  ipc/mqueue.c: only perform resource calculation if user valid
  include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
  scripts/gdb: add helpers to find and list devices
  scripts/gdb: add lx-genpd-summary command
  drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
  kernel/pid.c: convert struct pid count to refcount_t
  drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
  select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
  select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
  ...
2019-07-17 08:58:04 -07:00
Dan Carpenter 156e0b1a81 drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
The dev_info.name[] array has space for RIO_MAX_DEVNAME_SZ + 1
characters.  But the problem here is that we don't ensure that the user
put a NUL terminator on the end of the string.  It could lead to an out
of bounds read.

Link: http://lkml.kernel.org/r/20190529110601.GB19119@mwanda
Fixes: e8de370188 ("rapidio: add mport char device driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16 19:23:24 -07:00
Mauro Carvalho Chehab d2bdd48a65 docs: rapidio: add it to the driver API
This is actually a subsystem description, with contains both
kAPI and uAPI.

While it should ideally be slplit, let's place it at driver-api,
as most things are related to kAPI and driver-specific info.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:27 -03:00
Mauro Carvalho Chehab e0ae154404 docs: rapidio: convert to ReST
Rename the rapidio documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:26 -03:00
Thomas Gleixner c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Thomas Gleixner 1a59d1b8e0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:35 -07:00
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Thomas Gleixner 9ab65aff02 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details the full
  gnu general public license is included in this distribution in the
  file called copying

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 9 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.244154651@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 11:28:40 +02:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Kangjie Lu 23015b22e4 rapidio: fix a NULL pointer dereference when create_workqueue() fails
In case create_workqueue fails, the fix releases resources and returns
-ENOMEM to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:50 -07:00
Ira Weiny 73b0140bf0 mm/gup: change GUP fast to use flags rather than a write 'bool'
To facilitate additional options to get_user_pages_fast() change the
singular write parameter to be gup_flags.

This patch does not change any functionality.  New functionality will
follow in subsequent patches.

Some of the get_user_pages_fast() call sites were unchanged because they
already passed FOLL_WRITE or 0 for the write parameter.

NOTE: It was suggested to change the ordering of the get_user_pages_fast()
arguments to ensure that callers were converted.  This breaks the current
GUP call site convention of having the returned pages be the final
parameter.  So the suggestion was rejected.

Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marshall <hubcap@omnibond.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:46 -07:00
Gustavo A. R. Silva 92bf501638 rapidio/mport_cdev: mark expected switch fall-through
In preparation for enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warning:

  drivers/rapidio/devices/rio_mport_cdev.c: In function `mport_release_mapping':
  drivers/rapidio/devices/rio_mport_cdev.c:2151:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
     rio_unmap_inb_region(mport, map->phys_addr);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CC      drivers/regulator/fixed-helper.o
    CC      drivers/pinctrl/stm32/pinctrl-stm32f429.o
  drivers/rapidio/devices/rio_mport_cdev.c:2152:2: note: here
    case MAP_DMA:
    ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Link: http://lkml.kernel.org/r/20190212175014.GA14326@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:02 -08:00
Dan Carpenter 5ac188b12e drivers/rapidio/rio_cm.c: fix potential oops in riocm_ch_listen()
If riocm_get_channel() fails, then we should just return -EINVAL.
Calling riocm_put_channel() will trigger a NULL dereference and
generally we should call put() if the get() didn't succeed.

Link: http://lkml.kernel.org/r/20190110130230.GB27017@kadam
Fixes: b6e8d4aa11 ("rapidio: add RapidIO channelized messaging driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Greg Kroah-Hartman c9fbe769d0 rapidio: rio-sysfs.c: convert to use BUS_ATTR_WO
We are trying to get rid of BUS_ATTR() and the usage of that in
rio-sysfs.c can be trivially converted to use BUS_ATTR_WO(), so use that
instead.

Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 14:25:26 +01:00
Luis Chamberlain 750afb08ca cross-tree: phase out dma_zalloc_coherent()
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.

This change was generated with the following Coccinelle SmPL patch:

@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@

-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-08 07:58:37 -05:00
Christoph Hellwig 1753d50c9f rapidio: consolidate RAPIDIO config entry in drivers/rapidio
There is no good reason to duplicate the RAPIDIO menu in various
architectures.  Instead provide a selectable HAVE_RAPIDIO symbol
that indicates native availability of RAPIDIO support and the handle
the rest in drivers/pci.  This also means we now provide support
for PCI(e) to Rapidio bridges for every architecture instead of a
limited subset.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-23 11:46:13 +09:00
Colin Ian King 0ba7f398f3 drivers/rapidio/devices/rio_mport_cdev.c: remove redundant pointer md
Pointer md is being assigned but is never used hence it is redundant and
can be removed.

Cleans up clang warning:
warning: variable 'md' set but not used [-Wunused-but-set-variable]

Link: http://lkml.kernel.org/r/20180711082346.5223-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 10:52:51 -07:00
Kees Cook 42bc47b353 treewide: Use array_size() in vmalloc()
The vmalloc() function has no 2-factor argument form, so multiplication
factors need to be wrapped in array_size(). This patch replaces cases of:

        vmalloc(a * b)

with:
        vmalloc(array_size(a, b))

as well as handling cases of:

        vmalloc(a * b * c)

with:

        vmalloc(array3_size(a, b, c))

This does, however, attempt to ignore constant size factors like:

        vmalloc(4 * 1024)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  vmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  vmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  vmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
  vmalloc(
-	sizeof(TYPE) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT_ID
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT_ID
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

  vmalloc(
-	SIZE * COUNT
+	array_size(COUNT, SIZE)
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  vmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  vmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  vmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  vmalloc(C1 * C2 * C3, ...)
|
  vmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants.
@@
expression E1, E2;
constant C1, C2;
@@

(
  vmalloc(C1 * C2, ...)
|
  vmalloc(
-	E1 * E2
+	array_size(E1, E2)
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Kees Cook 6396bb2215 treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Ioan Nicu c5157b7686 rapidio: fix rio_dma_transfer error handling
Some of the mport_dma_req structure members were initialized late
inside the do_dma_request() function, just before submitting the
request to the dma engine. But we have some error branches before
that. In case of such an error, the code would return on the error
path and trigger the calling of dma_req_free() with a req structure
which is not completely initialized. This causes a NULL pointer
dereference in dma_req_free().

This patch fixes these error branches by making sure that all
necessary mport_dma_req structure members are initialized in
rio_dma_transfer() immediately after the request structure gets
allocated.

Link: http://lkml.kernel.org/r/20180412150605.GA31409@nokia.com
Fixes: bbd876adb8 ("rapidio: use a reference count for struct mport_dma_req")
Signed-off-by: Ioan Nicu <ioan.nicu.ext@nokia.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Frank Kunz <frank.kunz@nokia.com>
Cc: <stable@vger.kernel.org>	[4.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-20 17:18:35 -07:00
Ioan Nicu bbd876adb8 rapidio: use a reference count for struct mport_dma_req
Once the dma request is passed to the DMA engine, the DMA subsystem
would hold a pointer to this structure and could call the completion
callback after do_dma_request() has timed out.

The current code deals with this by putting timed out SYNC requests to a
pending list and freeing them later, when the mport cdev device is
released.  This still does not guarantee that the DMA subsystem is
really done with those transfers, so in theory
dma_xfer_callback/dma_req_free could be called after
mport_cdev_release_dma and could potentially access already freed
memory.

This patch simplifies the current handling by using a kref in the mport
dma request structure, so that it gets freed only when nobody uses it
anymore.

This also simplifies the code a bit, as FAF transfers are now handled in
the same way as SYNC and ASYNC transfers.  There is no need anymore for
the pending list and for the dma workqueue which was used in case of FAF
transfers, so we remove them both.

Link: http://lkml.kernel.org/r/20180405203342.GA16191@nokia.com
Signed-off-by: Ioan Nicu <ioan.nicu.ext@nokia.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Frank Kunz <frank.kunz@nokia.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11 10:28:37 -07:00
Vasyl Gomonovych b94bb1f610 drivers/rapidio/rio-scan.c: fix typo in comment
Fix typo in the words 'receiver', 'specified', 'during'

Link: http://lkml.kernel.org/r/20180321211035.8904-1-gomonovych@gmail.com
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11 10:28:37 -07:00
Bjorn Helgaas 7babfa5b4b rapidio/tsi721: use PCI_EXP_DEVCTL2_COMP_TIMEOUT macro
Use the existing PCI_EXP_DEVCTL2_COMP_TIMEOUT macro instead of hard-coding
the PCIe Completion Timeout Value mask.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
2018-02-15 18:41:06 -06:00
Linus Torvalds a9a08845e9 vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 14:34:03 -08:00
Markus Elfring eab216e9cc drivers/rapidio/devices/tsi721_dma.c: adjust six checks for null pointers
checkpatch pointed out the following:

  Comparison to NULL could be written !...

Thus fix the affected source code places.

Link: http://lkml.kernel.org/r/c3e79a1a-891e-cb62-990f-bd99839311b9@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Markus Elfring 6d94a03c80 drivers/rapidio/devices/tsi721_dma.c: delete an unnecessary variable initialisation in tsi721_alloc_chan_resources()
The local variable "desc" will eventually be set to an appropriate pointer
a bit later. Thus omit the explicit initialisation at the beginning.

Link: http://lkml.kernel.org/r/728d8e20-4ae9-d661-d932-2d99ce67e71f@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Markus Elfring 28a5cd5182 drivers/rapidio/devices/tsi721_dma.c: delete an error message for a failed memory allocation in tsi721_alloc_chan_resources()
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Link: http://lkml.kernel.org/r/a96fcaf8-ea24-bcac-0214-273620349d42@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Markus Elfring 4ba61ecacb rapidio: move 12 EXPORT_SYMBOL_GPL() calls to function implementations
checkpatch pointed information out like the following.

  WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable

Thus fix the affected source code places.

Link: http://lkml.kernel.org/r/5f51f606-ece8-7bff-bb86-81d182c49b98@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Markus Elfring 1acd14bfe9 rapidio: return an error code only as a constant in two functions
* Return an error code without storing it in an intermediate variable.

* Delete the label "out" and local variable "rc" which became unnecessary
  with this refactoring.

Link: http://lkml.kernel.org/r/8db441e1-c227-64e7-4747-095da63d7a2e@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Markus Elfring 002f6f40c8 rapidio: delete an unnecessary variable initialisation in three functions
The local variable "rc" will be set to an appropriate value a bit later.
Thus omit the explicit initialisation at the beginning.

Link: http://lkml.kernel.org/r/ed729e8c-815c-8b56-a48f-1be579d0cc2b@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Markus Elfring d1509c097f rapidio: improve a size determination in five functions
Replace the specification of data structures by pointer dereferences as
the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style
convention.

This issue was detected by using the Coccinelle software.

Link: http://lkml.kernel.org/r/495f571c-fb4d-b1d5-a6e5-494f2c537a8d@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Markus Elfring e1d66d0421 rapidio: adjust five function calls together with a variable assignment
checkpatch pointed information out like the following.

  ERROR: do not use assignment in if condition

Thus fix the affected source code places.

Link: http://lkml.kernel.org/r/6f5631ed-ec3e-503d-850a-ab09b5736dbe@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Markus Elfring 93dd49afc2 rapidio: adjust 12 checks for null pointers
checkpatch pointed information out like the following.

  Comparison to NULL could be written ...

Thus fix the affected source code places.

Link: http://lkml.kernel.org/r/739f9f1c-3ebe-c21b-c5e2-31976cfbc0ee@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:46 -08:00
Markus Elfring 0c5afcade3 rapidio: delete an error message for a failed memory allocation in rio_init_mports()
Patch series "RapidIO: Adjustments for some function implementations".

This patch (of 7):

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Link: http://lkml.kernel.org/r/dfd6887b-2521-cbf2-af5b-e70b5fa4c33c@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:45 -08:00
Al Viro afc9a42b74 the rest of drivers/*: annotate ->poll() instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28 11:06:58 -05:00