I2C drive setup structure is not properly allocated.
Make it static instead of pointer to store driver data.
Fixes: aeb068c572 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
If the vlan is down, free the packet instead of proceeding with other
processing, or counting it as received. If vlan interfaces are used
as slaves for bonding, with arp monitoring for connectivity, if the rx
counter is seen to be incrementing, then the bond device will not
observe that the interface is down.
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Vishakha Narvekar <Vishakha.Narvekar@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our first batch of fixes this release cycle, unfortunately a bit noisier
than usual. Two major groups stand out:
- Some pinctril dts/dtsi changes for stm32 due to a new driver being
merged during the merge window, and this aligns the DT contents between
the old format and the new. This could arguably be moved to the next
merge window but it also seemed relatively harmless to include now.
- Amlogic/meson had driver changes merged that required devicetree
changes to avoid functional/performance regressions. I've already
asked them to be more careful about this going forward, and making
sure drivers are compatible with older DTs when they make these kind
of changes. The platform is actively being upstreamed so there's a
few things in flight, we've seen this happen before and sometimes
it's hard to catch in time.
Besides that there is the usual mix of minor fixes.
-----BEGIN PGP SIGNATURE-----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=/0Nj
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Our first batch of fixes this release cycle, unfortunately a bit
noisier than usual. Two major groups stand out:
- Some pinctril dts/dtsi changes for stm32 due to a new driver being
merged during the merge window, and this aligns the DT contents
between the old format and the new. This could arguably be moved to
the next merge window but it also seemed relatively harmless to
include now.
- Amlogic/meson had driver changes merged that required devicetree
changes to avoid functional/performance regressions. I've already
asked them to be more careful about this going forward, and making
sure drivers are compatible with older DTs when they make these
kind of changes. The platform is actively being upstreamed so
there's a few things in flight, we've seen this happen before and
sometimes it's hard to catch in time.
Besides that there is the usual mix of minor fixes"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
ARM: dts: stm32: use right pinctrl compatible for stm32f469
ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board
ARM: defconfig: update Gemini defconfig
ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m
arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399
reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST
ARM: dts: da850-evm: add serial and ethernet aliases
ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
ARM: dts: am33xx: Add spi alias to match SOC schematics
ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts
arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399
arm64: dt marvell: Fix AP806 system controller size
MAINTAINERS: add Macchiatobin maintainers entry
ARC: reset: remove the misleading v1 suffix all over
ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
ARC: reset: Only build on archs that have IOMEM
ARM: at91: Replace uses of virt_to_phys with __pa_symbol
...
Update my imgtec.com and personal email address to my kernel.org one in
a few places as MIPS will soon no longer be part of Imagination
Technologies, and add mappings in .mailcap so get_maintainer.pl reports
the right address.
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to BSpec GLK like BXT needs to ignore the idle state of cores
before starting the DMC firmware's DC state handler.
Fixes: dbb28b5c3d ("drm/i915/DMC/GLK: Load DMC on GLK")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-2-imre.deak@intel.com
(cherry picked from commit b7208a3f3e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The DMC firmware program memory is lost after S3/S4 system suspend, so
we need to reprogram it during resume.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103070
Fixes: cebfcead63 ("drm/i915/DMC/CNL: Load DMC on CNL")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-1-imre.deak@intel.com
(cherry picked from commit 57522c4c87)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Port number 0 is an invalid port number. Set it to 1
as there is one port per i40iw device.
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove duplicate set_64bit_val call to offset 24.
Replace some instances of set_64bit_val with
i40iw_insert_wqe_hdr as valid bit needs a write
barrier and should be the last write operation for the WQE.
Fixes: 786c6adb3a ("i40iw: add puda code")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parse the vlan priority from the vlan tag and configure it to the
WC's sl field.
Fixes: abd49676c7 ("qed: Add RoCE ll2 & GSI support")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename vlan_id field name to vlan as it contains more than the vlan_id.
Mask out non vlan id fields from vlan tag of the QED LL2 RX GSI
vlan output. As it is expected to be vlan id only.
Ignore vlan_id with value of zero.
Fixes: abd49676c7 ("qed: Add RoCE ll2 & GSI support")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When UAR get_page fails, it needs to continue to cleanup debugfs for
congestion control parameters. Labels for error path were incorrectly
ordered.
This patch fixes to do correct cleanup on debugfs init failure and uar
get page failure.
Fixes: 4a2da0b8c0 ("IB/mlx5: Add debug control parameters for congestion control")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
---------------------
-Fix STMPE1600 bindings for stm32429i-eval board
-Use right compatible for stm32f469 pinctrl. It implies to use
pinctrl dedicated files for F4 SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C7yt
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into fixes
STM32 fixes for v4.14:
---------------------
-Fix STMPE1600 bindings for stm32429i-eval board
-Use right compatible for stm32f469 pinctrl. It implies to use
pinctrl dedicated files for F4 SoCs.
* tag 'stm32-dt-fixes-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: use right pinctrl compatible for stm32f469
ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board
Signed-off-by: Olof Johansson <olof@lixom.net>
AddressSanitizer instrumentation can significantly bloat the stack, and
with GCC 7 this can result in stack overflows at boot time in some
configurations.
We can avoid this by doubling our stack size when KASAN is in use, as is
already done on x86 (and has been since KASAN was introduced).
Regardless of other patches to decrease KASAN's stack utilization,
kernels built with KASAN will always require more stack space than those
built without, and we should take this into account.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
commit f6810c15cf ("iommu/arm-smmu: Clean up early-probing
workarounds") removed kernel code that was allowing to initialize
and probe the SMMU devices early (ie earlier than PCI devices, through
linker script callback entries) in the boot process because it was not
needed any longer in that the SMMU devices/drivers now support deferred
probing.
Since the SMMUs probe routines are also in charge of requesting global
PCI ACS kernel enablement, commit f6810c15cf ("iommu/arm-smmu: Clean
up early-probing workarounds") also postponed PCI ACS enablement to
SMMUs devices probe time, which is too late given that PCI devices needs
to detect if PCI ACS is enabled to init the respective capability
through the following call path:
pci_device_add()
-> pci_init_capabilities()
-> pci_enable_acs()
Add code in the ACPI IORT SMMU platform devices initialization path
(that is called before ACPI PCI enumeration) to detect if there
exists firmware mappings to map root complexes ids to SMMU ids
and if so enable ACS for the system.
Fixes: f6810c15cf ("iommu/arm-smmu: Clean up early-probing workarounds")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Merge misc fixes from Andrew Morton:
"A lot of stuff, sorry about that. A week on a beach, then a bunch of
time catching up then more time letting it bake in -next. Shan't do
that again!"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (51 commits)
include/linux/fs.h: fix comment about struct address_space
checkpatch: fix ignoring cover-letter logic
m32r: fix build failure
lib/ratelimit.c: use deferred printk() version
kernel/params.c: improve STANDARD_PARAM_DEF readability
kernel/params.c: fix an overflow in param_attr_show
kernel/params.c: fix the maximum length in param_get_string
mm/memory_hotplug: define find_{smallest|biggest}_section_pfn as unsigned long
mm/memory_hotplug: change pfn_to_section_nr/section_nr_to_pfn macro to inline function
kernel/kcmp.c: drop branch leftover typo
memremap: add scheduling point to devm_memremap_pages
mm, page_alloc: add scheduling point to memmap_init_zone
mm, memory_hotplug: add scheduling point to __add_pages
lib/idr.c: fix comment for idr_replace()
mm: memcontrol: use vmalloc fallback for large kmem memcg arrays
kernel/sysctl.c: remove duplicate UINT_MAX check on do_proc_douintvec_conv()
include/linux/bitfield.h: remove 32bit from FIELD_GET comment block
lib/lz4: make arrays static const, reduces object code size
exec: binfmt_misc: kill the onstack iname[BINPRM_BUF_SIZE] array
exec: binfmt_misc: fix race between load_misc_binary() and kill_node()
...
Currently, in PREEMPT_COUNT=n kernel, kvm_async_pf_task_wait() could call
schedule() to reschedule in some cases. This could result in
accidentally ending the current RCU read-side critical section early,
causing random memory corruption in the guest, or otherwise preempting
the currently running task inside between preempt_disable and
preempt_enable.
The difficulty to handle this well is because we don't know whether an
async PF delivered in a preemptible section or RCU read-side critical section
for PREEMPT_COUNT=n, since preempt_disable()/enable() and rcu_read_lock/unlock()
are both no-ops in that case.
To cure this, we treat any async PF interrupting a kernel context as one
that cannot be preempted, preventing kvm_async_pf_task_wait() from choosing
the schedule() path in that case.
To do so, a second parameter for kvm_async_pf_task_wait() is introduced,
so that we know whether it's called from a context interrupting the
kernel, and the parameter is set properly in all the callsites.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Pull smack fix from James Morris:
"It fixes a bug in xattr_getsecurity() where security_release_secctx()
was being called instead of kfree(), which leads to a memory leak in
the capabilities code. smack_inode_getsecurity is also fixed to behave
correctly when called from there"
* 'fixes-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
lsm: fix smack_inode_removexattr and xattr_getsecurity memleak
Commit 6edfa11cb3 ("clk: samsung: Add enable/disable operation for
PLL36XX clocks") added enable/disable operations to PLL clocks. Prior that
VPLL and EPPL clocks were always enabled because the enable bit was never
touched. Those clocks have to be enabled during suspend/resume cycle,
because otherwise board fails to enter sleep mode. This patch enables them
unconditionally before entering system suspend state. System restore
function will set them to the previous state saved in the register cache
done before that unconditional enable.
Fixes: 6edfa11cb3 ("clk: samsung: Add enable/disable operation for PLL36XX clocks")
CC: stable@vger.kernel.org # v4.13
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
- A memory fix with left over code from spliting out ftrace_ops
and function graph tracer, where the function graph tracer could
reset the trampoline pointer, leaving the old trampoline not to
be freed (memory leak).
- The update to Paul's patch that added the unnecessary READ_ONCE().
This removes the unnecessary READ_ONCE() instead of having to rebase
the branch to update the patch that added it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEQEw9Eu0DdyUUkuUUybkF8mrZjcsFAlnU++sUHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQybkF8mrZjcujzgf/ebIzGKe5vQKNrL4ITAcIz0T7Hvzl
pWw4uJp8kqO9x9EHMnztAkltQigvjvgDKZozJpUGgtNsFLuvdgQSBMK24YV8vLHs
UmXEnQ2tSB/2Sg2ccEnpjVXaMzL9aqlbeTmACbdd9UgZnvPiUYPejq2jFfECFQjb
k/gZT911ukBtx4mXYKzGFbTEZHdc/YUs6Y/wzB1ox5BBIUh71ZDZXxQTUHfXHlwS
Cst69/9dKl4nBEGDGas6/95iR+ORVv85osI/pqPtjSj4EkRnWfVRotaH1kNuSQil
gDIHSoy35NfXJx77/5IFHfrjFBAkr0IYRNL/jZaWazwM7rdqfAN8TwMQuA==
=4CtF
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixlets from Steven Rostedt:
"Two updates:
- A memory fix with left over code from spliting out ftrace_ops and
function graph tracer, where the function graph tracer could reset
the trampoline pointer, leaving the old trampoline not to be freed
(memory leak).
- The update to Paul's patch that added the unnecessary READ_ONCE().
This removes the unnecessary READ_ONCE() instead of having to
rebase the branch to update the patch that added it"
* tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rcu: Remove extraneous READ_ONCE()s from rcu_irq_{enter,exit}()
ftrace: Fix kmemleak in unregister_ftrace_graph
If a crypt mapping uses optional sector_size feature, additional
restrictions to mapped device segment size must be applied in
constructor, otherwise the device activation will fail later.
Fixes: 8f0009a225 ("dm crypt: optionally support larger encryption sector size")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Because the values of BTRFS_FS_EXCL_OP and BTRFS_FS_QUOTA_OVERRIDE overlap,
we should change the value.
First, BTRFS_FS_EXCL_OP was set to 14.
commit 171938e528 ("btrfs: track exclusive filesystem operation in flags")
Next, the value of BTRFS_FS_QUOTA_OVERRIDE was set to 14.
commit f29efe2921 ("btrfs: add quota override flag to enable quota override for CAP_SYS_RESOURCE")
As a result, the value 14 overlapped, by accident.
This problem is solved by defining the value of BTRFS_FS_EXCL_OP as 16,
the flags are internal.
Fixes: f29efe2921 ("btrfs: add quota override flag to enable quota override for CAP_SYS_RESOURCE")
CC: stable@vger.kernel.org # 4.13+
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minimize the change, update only BTRFS_FS_EXCL_OP ]
Signed-off-by: David Sterba <dsterba@suse.com>
When under memory-pressure it is possible that the mempool which backs
the 'struct request_queue' will make use of up to BLKDEV_MIN_RQ count
emergency buffers - in case it can't get a regular allocation. These
buffers are preallocated and once they are also used, they are
re-supplied with old finished requests from the same request_queue (see
mempool_free()).
The bug is, when re-supplying the emergency pool, the old requests are
not again ran through the callback mempool_t->alloc(), and thus also not
through the callback bsg_init_rq(). Thus we skip initialization, and
while the sense-buffer still should be good, scsi_request->cmd might
have become to be an invalid pointer in the meantime. When the request
is initialized in bsg.c, and the user's CDB is larger than BLK_MAX_CDB,
bsg will replace it with a custom allocated buffer, which is freed when
the user's command is finished, thus it dangles afterwards. When next a
command is sent by the user that has a smaller/similar CDB as
BLK_MAX_CDB, bsg will assume that scsi_request->cmd is backed by
scsi_request->__cmd, will not make a custom allocation, and write into
undefined memory.
Fix this by splitting bsg_init_rq() into two functions:
- bsg_init_rq() is changed to only do the allocation of the
sense-buffer, which is used to back the bsg job's reply buffer. This
pointer should never change during the lifetime of a scsi_request, so
it doesn't need re-initialization.
- bsg_initialize_rq() is a new function that makes use of
'struct request_queue's initialize_rq_fn callback (which was
introduced in v4.12). This is always called before the request is
given out via blk_get_request(). This function does the remaining
initialization that was previously done in bsg_init_rq(), and will
also do it when the request is taken from the emergency-pool of the
backing mempool.
Fixes: 50b4d48552 ("bsg-lib: fix kernel panic resulting from missing allocation of reply-buffer")
Cc: <stable@vger.kernel.org> # 4.11+
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jean-Denis Girard noticed commit c821e7f3 "pass bytes to
btrfs_bio_alloc" (https://patchwork.kernel.org/patch/9763081/)
introduces a regression on 32 bit machines.
When CONFIG_LBDAF is _not_ defined (CONFIG_LBDAF == Support for large
(2TB+) block devices and files) sector_t is 32 bit on 32bit machines.
In the function submit_extent_page, 'sector' (which is sector_t type) is
multiplied by 512 to convert it from sectors to bytes, leading to an
overflow when the disk is bigger than 4GB (!).
I added a cast to u64 to avoid overflow.
Fixes: c821e7f3 ("btrfs: pass bytes to btrfs_bio_alloc")
CC: stable@vger.kernel.org # 4.13+
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, same stm32f429-pinctrl driver is used for stm32f429 and
stm32f469. As pin map is different between those 2 MCUs,
a stm32f469-pinctrl driver has been recently added.
This patch
-allows to use stm32f469-pinctrl driver for stm32f469 boards
-reworks stm32 devicetree files to fit with stm32f429 / stm32f469
In the same time it fixes an issue when only MACH_STM32F469 flag is
selected in menuconfig.
Fixes: d28bcd53fa ("ARM: stm32: Introduce MACH_STM32F469 flag")
Reported-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Commit eac1e731b5 ("powerpc/xive: guest exploitation of the XIVE
interrupt controller") introduced support for the XIVE exploitation
mode of the P9 interrupt controller on the pseries platform.
At that time, support for CPU removal was not complete on PowerVM and
CPU hot unplug remained untested. It appears that some cleanups of the
XIVE internal structures are required before releasing the CPU,
without which the kernel crashes in a RTAS call doing the CPU
isolation.
These changes fix the crash by deconfiguring the IPI interrupt source
and clearing the event queues of the CPU when it is removed.
Fixes: eac1e731b5 ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When resetting an IPI, hw_ipi should also be set to zero.
Fixes: eac1e731b5 ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, NVMe PCI host driver is programming CMB dma address as
I/O SQs addresses. This results in failures on systems where 1:1
outbound mapping is not used (example Broadcom iProc SOCs) because
CMB BAR will be progammed with PCI bus address but NVMe PCI EP will
try to access CMB using dma address.
To have CMB working on systems without 1:1 outbound mapping, we
program PCI bus address for I/O SQs instead of dma address. This
approach will work on systems with/without 1:1 outbound mapping.
Based on a report and previous patch from Abhishek Shah.
Fixes: 8ffaadf7 ("NVMe: Use CMB for the IO SQes if available")
Cc: stable@vger.kernel.org
Reported-by: Abhishek Shah <abhishek.shah@broadcom.com>
Tested-by: Abhishek Shah <abhishek.shah@broadcom.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
To declare gpio interrupt line for STMPE1600, 2 possibilities are offered:
-use gpio binding (and then the gpiolib interface inside driver)
-use interrupt binding as each gpio-controller are also interrupt controller
on stm32f429.
In STMPE 1600 node both (gpio and interrupt) bindings are defined.
This patch fixes this issue and use only interrupt binding.
Fixes: c04b2e72af ("ARM: dts: stm32: Enable STMPE1600 gpio expander of STM32F429-EVAL board")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The function names made sense up to the point where the watchdog
(re)configuration was unified to use softlockup_reconfigure_threads() for
all configuration purposes. But that includes scenarios which solely
configure the nmi watchdog.
Rename softlockup_reconfigure_threads() and softlockup_init_threads() so
the function names match the functionality.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
The rework of the core hotplug code triggers the WARN_ON in start_wd_cpu()
on powerpc because it is called multiple times for the boot CPU.
The first call is via:
start_wd_on_cpu+0x80/0x2f0
watchdog_nmi_reconfigure+0x124/0x170
softlockup_reconfigure_threads+0x110/0x130
lockup_detector_init+0xbc/0xe0
kernel_init_freeable+0x18c/0x37c
kernel_init+0x2c/0x160
ret_from_kernel_thread+0x5c/0xbc
And then again via the CPU hotplug registration:
start_wd_on_cpu+0x80/0x2f0
cpuhp_invoke_callback+0x194/0x620
cpuhp_thread_fun+0x7c/0x1b0
smpboot_thread_fn+0x290/0x2a0
kthread+0x168/0x1b0
ret_from_kernel_thread+0x5c/0xbc
This can be avoided by setting up the cpu hotplug state with nocalls and
move the initialization to the watchdog_nmi_probe() function. That
initializes the hotplug callbacks without invoking the callback and the
following core initialization function then configures the watchdog for the
online CPUs (in this case CPU0) via softlockup_reconfigure_threads().
Reported-and-tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Instead of dropping the cpu hotplug lock after stopping NMI watchdog and
threads and reaquiring for restart, the code and the protection rules
become more obvious when holding cpu hotplug lock across the full
reconfiguration.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710022105570.2114@nanos
The recent cleanup of the watchdog code split watchdog_nmi_reconfigure()
into two stages. One to stop the NMI and one to restart it after
reconfiguration. That was done by adding a boolean 'run' argument to the
code, which is functionally correct but not necessarily a piece of art.
Replace it by two explicit functions: watchdog_nmi_stop() and
watchdog_nmi_start().
Fixes: 6592ad2fcc ("watchdog/core, powerpc: Make watchdog_nmi_reconfigure() two stage")
Requested-by: Linus 'Nursing his pet-peeve' Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Thomas 'Mopping up garbage' Gleixner <tglx@linutronix.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710021957480.2114@nanos
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock
is optional because not all the SoCs need them but at least for Armada
7K/8K it is actually mandatory.
The binding documentation is updating accordingly.
Without this patch the kernel hand during boot if the mvpp2.2 network
driver was not present in the kernel. Indeed the clock needed by the
xenon controller was set by the network driver.
Fixes: 3a3748dba8 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core
functionality)"
CC: Stable <stable@vger.kernel.org>
Tested-by: Zhoujie Wu <zjwu@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It has been reported that some platforms (odroid-c2) may require
a different tx phase setting to operate at high speed (hs200 and hs400)
To improve the situation, this patch includes tx phase in the tuning
process.
Fixes: d341ca88ee ("mmc: meson-gx: rework tuning function")
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Resetting the phase when POWER_ON is set the set_ios() call means that the
phase is reset almost every time the set_ios() is called, while the
expected behavior was to reset the phase on a power cycle.
This had gone unnoticed until now because in all mode (except hs400) the
tuning is done after the last to set_ios(). In such case, the tuning
result is used anyway. In HS400, there are a few calls to set_ios() after
the tuning is done, overwriting the tuning result.
Resetting the phase on POWER_UP instead of POWER_ON solve the problem.
Fixes: d341ca88ee ("mmc: meson-gx: rework tuning function")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Using CLK_DIVIDER_ROUND_CLOSEST is unsafe as the mmc clock could be
rounded to a rate higher the specified rate. Removing this flag ensure
that, if the rate needs to be rounded, it will be rounded down.
Fixes: 51c5d8447b ("MMC: meson: initial support for GX platforms")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In may, Steven sent a patch deleting the bounce buffer handling
and the CONFIG_MMC_BLOCK_BOUNCE option.
I chose the less invasive path of making it a runtime config
option, and we merged that successfully for kernel v4.12.
The code is however just standing in the way and taking up
space for seemingly no gain on any systems in wide use today.
Pierre says the code was there to improve speed on TI SDHCI
controllers on certain HP laptops and possibly some Ricoh
controllers as well. Early SDHCI controllers lacked the
scatter-gather feature, which made software bounce buffers
a significant speed boost.
We are clearly talking about the list of SDHCI PCI-based
MMC/SD card readers found in the pci_ids[] list in
drivers/mmc/host/sdhci-pci-core.c.
The TI SDHCI derivative is not supported by the upstream
kernel. This leaves the Ricoh.
What we can however notice is that the x86 defconfigs in the
kernel did not enable CONFIG_MMC_BLOCK_BOUNCE option, which
means that any such laptop would have to have a custom
configured kernel to actually take advantage of this
bounce buffer speed-up. It simply seems like there was
a speed optimization for the Ricoh controllers that noone
was using. (I have not checked the distro defconfigs but
I am pretty sure the situation is the same there.)
Bounce buffers increased performance on the OMAP HSMMC
at one point, and was part of the original submission in
commit a45c6cb816 ("[ARM] 5369/1: omap mmc: Add new
omap hsmmc controller for 2430 and 34xx, v3")
This optimization was removed in
commit 0ccd76d4c2 ("omap_hsmmc: Implement scatter-gather
emulation")
which found that scatter-gather emulation provided even
better performance.
The same was introduced for SDHCI in
commit 2134a922c6 ("sdhci: scatter-gather (ADMA) support")
I am pretty positively convinced that software
scatter-gather emulation will do for any host controller what
the bounce buffers were doing. Essentially, the bounce buffer
was a reimplementation of software scatter-gather-emulation in
the MMC subsystem, and it should be done away with.
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Juha Yrjola <juha.yrjola@solidboot.com>
Cc: Steven J. Hill <Steven.Hill@cavium.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Suggested-by: Steven J. Hill <Steven.Hill@cavium.com>
Suggested-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
security_inode_getsecurity() provides the text string value
of a security attribute. It does not provide a "secctx".
The code in xattr_getsecurity() that calls security_inode_getsecurity()
and then calls security_release_secctx() happened to work because
SElinux and Smack treat the attribute and the secctx the same way.
It fails for cap_inode_getsecurity(), because that module has no
secctx that ever needs releasing. It turns out that Smack is the
one that's doing things wrong by not allocating memory when instructed
to do so by the "alloc" parameter.
The fix is simple enough. Change the security_release_secctx() to
kfree() because it isn't a secctx being returned by
security_inode_getsecurity(). Change Smack to allocate the string when
told to do so.
Note: this also fixes memory leaks for LSMs which implement
inode_getsecurity but not release_secctx, such as capabilities.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
If we got two AIO writes into a COW area the second one might not have any
COW extents left to convert. Handle that case gracefully instead of
triggering an assert or accessing beyond the bounds of the extent list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the CoW fork exists as a secondary data structure to the data
fork, we must always swap cow forks during swapext. We also need to
swap the extent counts and reset the cowblocks tags.
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add temporary fix to HSDK platform code to setup CPU frequency
to 1GHz on early boot.
We can remove this fix when smart hsdk pll driver will be
introduced, see discussion:
https://www.mail-archive.com/linux-snps-arc@lists.infradead.org/msg02689.html
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
ARCv2 ISA_CONFIG and ARC700_BUILD build config registers are not
compatible. cpuinfo_arc had isa info placeholder which was mashup of bits
form both.
Untangle this by defining it off of ARCv2 ISA info and it is fine even
for ARC700 since former is a super set of latter (ARC700 buildonly has 2
bits for atomics and stack check).
At runtime, we treat ARCv2 ISA info as a generic placeholder but
populate it correctly depending on ARC700 or HS.
This paves way for adding more HS specific bits in isa info which was
colliding with the extra bits for arc700.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The top-level Makefile sets the default of UTS_MACHINE to $(ARCH).
If ARCH and UTS_MACHINE match, arch/$(ARCH)/Makefile need not specify
UTS_MACHINE explicitly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
With corresponding clk driver now merged upstream, switch to it.
- core_clk now represent the PLL (vs. fixed clk before)
- input_clk represent the clk signal src for PLL (basically xtal)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Pierre-Yves MORDRET