If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.
Fixes: 3ff6e0d8d6 ("clk: samsung: Add support to register rate_table for samsung plls")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123032015.63980-1-xiujianfeng@huawei.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
of_device_get_match_data() function should not be used on the device
other than the one matched to the given driver, because it always returns
the match_data of the matched driver. In case of exynos-clkout driver,
the code matched the OF IDs on the PARENT device, so replacing it with
of_device_get_match_data() broke the driver.
This reverts commit 777aaf3d1d.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 777aaf3d1d ("clk: samsung: exynos-clkout: Use of_device_get_match_data()")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221108213718.32076-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
"div4" DIVs which divide PLLs by 4 are actually dividing "div2" DIVs by
2 to achieve a by 4 division, thus their parents are the respective
"div2" DIVs. These DIVs were mistakenly set to have the PLLs as parents.
This leads to the kernel thinking "div4"s and everything under them run
at 2x the clock speed. Fix this.
Fixes: 45bd8166a1 ("clk: samsung: Add initial Exynos7885 clock driver")
Signed-off-by: David Virag <virag.david003@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20221013151341.151208-1-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CMU_MFCMSCL clock domain provides clocks for MFC (Multi-Format Codec),
JPEG Codec and Scaler IP-cores. According to Exynos850 TRM, CMU_MFCMSCL
generates MFC, M2M, MCSC and JPEG clocks for BLK_MFCMSCL.
This patch adds next clocks:
- bus clocks in CMU_TOP for CMU_MFCMSCL
- all internal CMU_MFCMSCL clocks
- leaf clocks for MFCMSCL, TZPC (TrustZone Protection Controller),
JPEG codec, M2M (Memory-to-Memory), MCSC (Multi-Channel Scaler),
MFC (Multi-Format Codec), PPMU (Platform Performance Monitoring
Unit), SysMMU and SysReg
MFCMSCL related gate clocks in CMU_TOP were marked as CLK_IS_CRITICAL,
because:
1. All of those have to be enabled in order to read
/sys/kernel/debug/clk/clk_summary file
2. When some user driver (e.g. exynos-sysmmu) disables some derived
leaf clock, it can lead to CMU_TOP clocks disable, which then makes
the system hang. To prevent that, the CLK_IS_CRITICAL flag is used,
as CLK_IGNORE_UNUSED is not enough.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220809113323.29965-8-semen.protsenko@linaro.org
CMU_IS clock domain provides clocks for IS IP-core (Image Signal
Processing Subsystem). According to Exynos850 TRM, CMU_IS generates
CSIS, IPP, ITP, VRA and GDC clocks for BLK_IS.
This patch adds next clocks:
- bus clocks in CMU_TOP needed for CMU_IS
- all internal CMU_IS clocks
- leaf clocks for IS IP-core, CSIS (Camera Serial Interface Slave),
D_TZPC (TrustZone Protection Controller), CSIS DMA, GDC (Geometric
Distortion Correction), IPP (Image Preprocessing Processing core),
ITP (Image Texture Processing core), MCSC (Multi-Channel Scaler),
VRA (Visual Recognition Accelerator), PPMU (Platform Performance
Monitoring Unit), SysMMU and SysReg
IS related gate clocks in CMU_TOP were marked as CLK_IS_CRITICAL,
because:
1. All of those have to be enabled in order to read
/sys/kernel/debug/clk/clk_summary file
2. When some user driver (e.g. exynos-sysmmu) disables some derived
leaf clock, it can lead to CMU_TOP clocks disable, which then makes
the system hang. To prevent that, the CLK_IS_CRITICAL flag is used,
as CLK_IGNORE_UNUSED is not enough.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220809113323.29965-7-semen.protsenko@linaro.org
CMU_AUD clock domain provides clocks for ABOX IP-core (audio subsystem).
According to Exynos850 TRM, CMU_AUD generates Cortex-A32 clock, bus
clock and audio clocks for BLK_AUD.
This patch adds next clocks:
- bus clocks in CMU_TOP needed for CMU_AUD
- all internal CMU_AUD clocks
- leaf clocks for Cortex-A32, Speedy FM, UAIF0..UAIF6 (Unified Audio
Interface), CNT (counter), ABOX IP-core, ASB (Asynchronous Bridge),
DAP (Debug Access Port), I2S Codec MCLK, D_TZPC (TrustZone
Protection Controller), GPIO, PPMU (Platform Performance Monitoring
Unit), SysMMU, SysReg and WDT
ABOX clock was marked as CLK_IGNORE_UNUSED, as system hangs on boot
otherwise. Once ABOX driver is implemented, maybe it can be handled
there instead.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220809113323.29965-6-semen.protsenko@linaro.org
Fix some typos in comments and do small coding style improvements.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220809113323.29965-5-semen.protsenko@linaro.org
CMU_FSYS1 provides clocks for USB(2 x USB3.1 Gen-1, 2 x USB 2.0) and
mmc. For MMC clocks, PLL_MMC(PLL0831X type) is also supported as a PLL
source clock provider.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/d4aa967538fed9667e9550a256e545026fc2fa8d.1659054220.git.chanho61.park@samsung.com
Some register offsets of peric0 and peric1 cmu blocks need to be
corrected and re-ordered by numerical order.
Fixes: f2dd366992 ("clk: samsung: exynosautov9: add cmu_peric0 clock support")
Fixes: b35f27fe73 ("clk: samsung: exynosautov9: add cmu_peric1 clock support")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220727021357.152421-4-chanho61.park@samsung.com
"gout_peric0_pclk_1" and "gout_peric1_pclk_1" should be added to peric0
and peric1 respectively.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220727021357.152421-3-chanho61.park@samsung.com
TREX D Core and P core clocks seem to be related to the BTS (Bus Traffic
Shaper) inside the Exynos7885 SoC, and are needed for the SoC to
function correctly.
When clocks are cut from TREX D Core, the eMMC and the framebuffer stops
working properly. Other unknown things may stop working as well.
When clocks are cut from TREX P Core, the system locks up needing a hard
reset.
Add these clocks and mark them critical so that they are always on.
Signed-off-by: David Virag <virag.david003@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220601233743.56317-5-virag.david003@gmail.com
CMU_FSYS clock domain provides clocks for FSYS IP-core providing clocks
for all MMC devices on Exynos7885, and USB30DRD.
Add clocks:
- Bus clocks in CMU_TOP needed for CMU_FSYS
- All clocks in CMU_FSYS needed for MMC devices
Signed-off-by: David Virag <virag.david003@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220601233743.56317-4-virag.david003@gmail.com
Like CMU_PERIC0, this provides clocks for USI06 ~ USI11 and USI_I2C.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-10-chanho61.park@samsung.com
CMU_PERIC0 provides clocks for USI0 ~ USI5 and USIx_I2C. USI0/1/2/3/4/5
have its own divider but USI_I2Cs share "dout_peric0_usi_i2c" divider.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220504075154.58819-9-chanho61.park@samsung.com
CMU_FSYS2 is responsible to control clocks of BLK_FSYS2 which includes
ufs and ethernet IPs. This patch adds some essential clocks to be
controlled by ethernet/ufs drivers instead of listing full clocks.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-8-chanho61.park@samsung.com
CMU_BUSMC is responsible to control clocks of BLK_BUSMC which represents
Data/Peri buses. Most clocks except PDMA/SPDMA are not necessary to
be controlled by HLOS. So, this adds PDMA/SPDMA gate clocks.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-7-chanho61.park@samsung.com
CMU_PERIS is responsible to control clocks of BLK_PERIS which has
OPT/MCT/WDT and TMU. This patch only supports WDT gate clocks and all
other clocks except WDT will be supported later.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-6-chanho61.park@samsung.com
Add CMU_CORE clock which represents Core BUS clocks. The source clocks
of this CMU block are oscclk or dout_clkcmu_core_bus. Thus, two source
clocks should be provided via device tree. All the gate clocks are
defined as CLK_IS_CRITICAL because they control(gate/ungate) core bus
clocks but not been assigned to any drivers.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-5-chanho61.park@samsung.com
This adds support for CMU_TOP which generates clocks for all the
function blocks such as CORE, FSYS0/1/2, PERIC0/1 and so on. For
CMU_TOP, PLL_SHARED0,1,2,3 and 4 will be the sources of this block
and they will generate bus clocks.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-4-chanho61.park@samsung.com
The Tesla FSD clock controller driver uses shared parts from Exynos
ARM64 clock drivers, so add proper dependency to fix COMPILE_TEST build
errors like:
/usr/bin/aarch64-linux-gnu-ld: drivers/clk/samsung/clk-fsd.o: in function `fsd_cmu_probe':
clk-fsd.c:(.init.text+0x9c): undefined reference to `exynos_arm64_register_cmu'
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e3f3dc3810 ("clk: samsung: fsd: Add cmu_peric block clock information")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220129173407.278591-1-krzysztof.kozlowski@canonical.com
Adds clocks for BLK_CAM_CSI block, this is needed for CSI to work.
Cc: linux-fsd@tesla.com
Signed-off-by: Sathyakam M <sathya@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20220124141644.71052-11-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Adds cmu_imem clock related code, imem block contains IPs
like WDT, DMA, TMU etc, these clocks are required for such
IP function.
Cc: linux-fsd@tesla.com
Signed-off-by: Arjun K V <arjun.kv@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Tauseef Nomani <tauseef.n@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20220124141644.71052-9-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
CMU_FSYS0 block has IPs like UFS, EQOS, PCIe etc, lets add
the related clock information for the same.
Cc: linux-fsd@tesla.com
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20220124141644.71052-7-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add CMU_PERIC block clock information needed for various IPs
functions found in this block.
Cc: linux-fsd@tesla.com
Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com>
Signed-off-by: Niyas Ahmed S T <niyas.ahmed@samsung.com>
Signed-off-by: Chandrasekar R <rcsekar@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20220124141644.71052-6-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add initial clock support for FSD (Full Self-Driving) SoC
which is required to bring-up platforms based on this SoC.
Cc: linux-fsd@tesla.com
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20220124141644.71052-5-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
This is an initial implementation adding basic clocks, such as UART,
USI, I2C, WDT, ect. and their parent clocks. It is heavily based on the
Exynos850 clock driver at 'drivers/clk/samsung/clk-exynos850.c' which
was made by Sam Protsenko, thus the copyright and author lines were
kept.
Bus clocks are enabled by default as well to avoid hangs while trying to
access CMU registers.
Only the parts of CMU_TOP needed for CMU_CORE and CMU_PERI, a bit of
CMU_CORE, and most of CMU_PERI is implemented as of now.
Signed-off-by: David Virag <virag.david003@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211206153124.427102-7-virag.david003@gmail.com
pll1417x is used in Exynos7885 SoC for top-level integer PLLs.
It is similar enough to pll0822x that practically the same code can
handle both. The difference that's to be noted is that when defining a
pl1417x PLL, the "con" parameter of the PLL macro should be set to the
CON1 register instead of CON3, like this:
PLL(pll_1417x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON0_PLL_SHARED0,
NULL),
Signed-off-by: David Virag <virag.david003@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211206153124.427102-6-virag.david003@gmail.com
Rename exynos850_register_cmu to exynos_arm64_register_cmu and move it
to a new file called "clk-exynos-arm64.c".
This should have no functional changes, but it will allow this code to
be shared between other arm64 Exynos SoCs, like the Exynos7885 and
possibly ExynosAuto V9.
Signed-off-by: David Virag <virag.david003@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211206153124.427102-5-virag.david003@gmail.com
System Register is used to configure system behavior, like USI protocol,
etc. SYSREG clocks should be provided to corresponding syscon nodes, to
make it possible to modify SYSREG registers.
While at it, add also missing PMU and GPIO clocks, which looks necessary
and might be needed for corresponding Exynos850 features soon.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20211217161549.24836-3-semen.protsenko@linaro.org
Some clocks must be registered before init calls. For example MCT clock
(from CMU_PERI) is needed for MCT timer driver, which is registered
with TIMER_OF_DECLARE(). By the time we get to core_initcall() used for
clk-exynos850 platform driver init, it's already too late. Inability to
get "mct" clock in MCT driver leads to kernel panic, as functions
registered with *_OF_DECLARE() can't do deferred calls. MCT timer driver
can't be fixed either, as it's acting as a clock source and it's
essential to register it in start_kernel() -> time_init().
Let's register CMU_PERI clocks early, using CLK_OF_DECLARE(). CMU_TOP
generates clocks needed for CMU_PERI, but it's already registered early.
While at it, let's cleanup the code a bit, by extracting everything
related to CMU initialization and registration to the separate function.
Similar issue was discussed at [1] and addressed in commit 1f7db7bbf0
("clk: renesas: cpg-mssr: Add early clock support"), as well as in
drivers/clk/mediatek/clk-mt2712.c.
[1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20180829132954.64862-2-chris.brandt@renesas.com/
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211122144206.23134-1-semen.protsenko@linaro.org
Some clocks shouldn't be automatically disabled in clk_disable_unused(),
otherwise kernel hangs. Mark those clocks with:
- CLK_IS_CRITICAL flag, when there won't be any consumers for that
clock, but system can't function when it's gated
- CLK_IGNORE_UNUSED flag, when consumer driver will be probably added
later
That makes it possible to run the kernel without passing the
"clk_ignore_unused" param.
Next clocks were modified:
- "gout_dpu_cmu_dpu_pclk": CLK_IGNORE_UNUSED
Will be enabled later in DSIM driver (Display Serial Interface
Master).
- "gout_gpio_peri_pclk": CLK_IGNORE_UNUSED
"gout_gpio_cmgp_pclk": CLK_IGNORE_UNUSED
"gout_gpio_hsi_pclk": CLK_IGNORE_UNUSED
Should be probably enabled in corresponding GPIO driver later, or
made CLK_IS_CRITICAL. "gout_gpio_peri_clk" is actually used by LEDs
on Exynos850-based dev board, so kernel hangs if this clock is not
running. Other clocks were marked as "ignore unused" to prevent
similar issues for other use cases or boards that might be added
later.
- "gout_cci_aclk": CLK_IS_CRITICAL
CCI (Cache Coherent Interconnect): obviously is critical.
- "gout_gic_clk": CLK_IS_CRITICAL
GIC (Generic Interrupt Controller): obviously is critical.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211121232741.6967-7-semen.protsenko@linaro.org
CMU_CMGP clock domain provides clocks for CMGP IP-core (Common GPIO).
CMGP module encapsulates next blocks:
- 8 GPIO lines
- 1 GPADC
- 2 USI blocks, each can be configured to provide one of
UART/SPI/HSI2C serial interfaces
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211121232741.6967-5-semen.protsenko@linaro.org
CMU_APM clock domain provides clocks for APM IP-core (Active Power
Management). According to Exynos850 TRM, CMU_APM generates I3C, Mailbox,
Speedy, Timer, WDT, RTC and PMU clocks for BLK_ALIVE.
This patch adds next clocks:
- bus clocks in CMU_TOP needed for CMU_APM
- all internal CMU_APM clocks
- leaf clocks for I3C, Speedy and RTC IP-cores
- bus clocks for CMU_CMGP and CMU_CHUB
CMU_APM doesn't belong to Power Domains, but platform driver is used for
its registration to keep its bus clock always running. Otherwise rtc-s3c
driver disables that clock and system freezes.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20211121232741.6967-3-semen.protsenko@linaro.org
Convert the remaining exynos clock drivers to use
samsung_clk_register_cpu() or if possible use samsung_cmu_register_one().
With this we can now make exynos_register_cpu_clock() a static function
so that future CPU clock registration changes will use the samsung common
clock driver.
The main benefit of this change is that it standardizes the CPU clock
registration for the samsung clock drivers.
Link: https://lore.kernel.org/r/20211015190515.3760577-1-willmcvicker@google.com
Signed-off-by: Will McVicker <willmcvicker@google.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
[snawrocki@kernel.org: Fixed build break in clk-exynos4.c, clk-exynos5250.c]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Remove useless __init atrribute and unneeded extern qualifier in function
declarations in header files.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20211015151425.29743-1-s.nawrocki@samsung.com
__clk_lookup() interface is obsolete, so remove it from the Samsung clock
drivers. This has been achieved by getting rid of custom _get_rate()
helper and replacing it with clk_hw_get_rate().
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20211018125456.8292-2-m.szyprowski@samsung.com
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Describe better which driver applies to which SoC, to make configuring
kernel for Samsung SoC easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20210924133624.112593-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Use the samsung common clk driver to initialize the apollo and atlas
clocks. This removes their custom init functions and uses the
samsung_cmu_register_one() instead.
Signed-off-by: Will McVicker <willmcvicker@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211014195347.3635601-3-willmcvicker@google.com
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Adds 'struct samsung_cpu_clock' and corresponding CPU clock registration
function to the samsung common clk driver. This allows samsung clock
drivers to register their CPU clocks with the samsung_cmu_register_one()
API.
Currently the exynos5433 apollo and atlas clks have their own custom
init functions to handle registering their CPU clocks. With this patch
we can drop their custom CLK_OF_DECLARE functions and directly call
samsung_cmu_register_one().
Signed-off-by: Will McVicker <willmcvicker@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211014195347.3635601-2-willmcvicker@google.com
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
This is the initial implementation adding only basic clocks like UART,
MMC, I2C and corresponding parent clocks. Design is influenced by
Exynos5433 clock driver.
Bus clock is enabled by default (in probe function) for all CMUs except
CMU_TOP, the reasoning is as follows. By default if bus clock has no
users its "enable count" value is 0. It might be actually running if
it's already enabled in bootloader, but then in some cases it can be
disabled by mistake. For example, such case was observed when
dw_mci_probe() enabled the bus clock, then failed to do something and
disabled that bus clock on error path. After that, even the attempt to
read the 'clk_summary' file in DebugFS freezed forever, as CMU bus clock
ended up being disabled and it wasn't possible to access CMU registers
anymore.
To avoid such cases, CMU driver must increment the ref count for that
bus clock by running clk_prepare_enable(). There is already existing
'.clk_name' field in struct samsung_cmu_info, exactly for that reason.
It was added in commit 523d3de41f ("clk: samsung: exynos5433: Add
support for runtime PM"), with next mentioning in commit message:
> Also for each CMU there is one special parent clock, which has to be
> enabled all the time when any access to CMU registers is being done.
But that clock is actually only enabled in Exynos5433 clock driver right
now. So the same code is added to exynos850_cmu_probe() function,
As was described above, it might be helpful not only for PM reasons, but
also to prevent possible erroneous clock gating on error paths.
Another way to workaround that issue would be to use CLOCK_IS_CRITICAL
flag for corresponding gate clocks. But that might be not very good
design decision, as we might still want to disable that bus clock, e.g.
on PM suspend.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20211008154352.19519-6-semen.protsenko@linaro.org
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
pll0831x PLL is used in Exynos850 SoC for top-level fractional PLLs. The
code was derived from very similar pll36xx type, with next differences:
1. Lock time for pll0831x is 500*P_DIV, when for pll36xx it's 3000*P_DIV
2. It's not suggested in Exynos850 TRM that S_DIV change doesn't require
performing PLL lock procedure (which is done in pll36xx
implementation)
3. The offset from PMS-values register to K-value register is 0x8 for
pll0831x, when for pll36xx it's 0x4
When defining pll0831x type, CON3 register offset should be provided as
a "con" parameter of PLL() macro, like this:
PLL(pll_0831x, 0, "fout_mmc_pll", "oscclk",
PLL_LOCKTIME_PLL_MMC, PLL_CON3_PLL_MMC, pll0831x_26mhz_tbl),
To define PLL rates table, one can use PLL_36XX_RATE() macro, e.g.:
PLL_36XX_RATE(26 * MHZ, 799999877, 31, 1, 0, -15124)
as it's completely appropriate for pl0831x type and there is no sense in
duplicating that.
If bit #1 (MANUAL_PLL_CTRL) is not set in CON1 register, it won't be
possible to set new rate, with next error showing in kernel log:
Could not lock PLL fout_mmc_pll
That can happen for example if bootloader clears that bit beforehand.
PLL driver doesn't account for that, so if MANUAL_PLL_CTRL bit was
cleared, it's assumed it was done for a reason and it shouldn't be
possible to change that PLL's rate at all.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20211008154352.19519-3-semen.protsenko@linaro.org
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
pll0822x PLL is used in Exynos850 SoC for top-level integer PLLs. The
code was derived from very similar pll35xx type, with next differences:
1. Lock time for pll0822x is 150*P_DIV, when for pll35xx it's 270*P_DIV
2. It's not suggested in Exynos850 TRM that S_DIV change doesn't require
performing PLL lock procedure (which is done in pll35xx
implementation)
When defining pll0822x type, CON3 register offset should be provided as
a "con" parameter of PLL() macro, like this:
PLL(pll_0822x, 0, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0,
exynos850_shared0_pll_rates),
To define PLL rates table, one can use PLL_35XX_RATE() macro, e.g.:
PLL_35XX_RATE(26 * MHZ, 1600 * MHZ, 800, 13, 0)
as it's completely appropriate for pl0822x type and there is no sense in
duplicating that.
If bit #1 (MANUAL_PLL_CTRL) is not set in CON1 register, it won't be
possible to set new rate, with next error showing in kernel log:
Could not lock PLL fout_shared1_pll
That can happen for example if bootloader clears that bit beforehand.
PLL driver doesn't account for that, so if MANUAL_PLL_CTRL bit was
cleared, it's assumed it was done for a reason and it shouldn't be
possible to change that PLL's rate at all.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20211008154352.19519-2-semen.protsenko@linaro.org
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210907085122.4305-1-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210907085115.4254-1-caihuoqing@baidu.com
Stephen Boyd