Commit Graph

14 Commits

Author SHA1 Message Date
Ingo Molnar 4bf07f6562 timekeeping, clocksource: Fix various typos in comments
Fix ~56 single-word typos in timekeeping & clocksource code comments.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-kernel@vger.kernel.org
2021-03-22 23:06:48 +01:00
Balasubramani Vivekanandan b9023b91dd tick: broadcast-hrtimer: Fix a race in bc_set_next
When a cpu requests broadcasting, before starting the tick broadcast
hrtimer, bc_set_next() checks if the timer callback (bc_handler) is active
using hrtimer_try_to_cancel(). But hrtimer_try_to_cancel() does not provide
the required synchronization when the callback is active on other core.

The callback could have already executed tick_handle_oneshot_broadcast()
and could have also returned. But still there is a small time window where
the hrtimer_try_to_cancel() returns -1. In that case bc_set_next() returns
without doing anything, but the next_event of the tick broadcast clock
device is already set to a timeout value.

In the race condition diagram below, CPU #1 is running the timer callback
and CPU #2 is entering idle state and so calls bc_set_next().

In the worst case, the next_event will contain an expiry time, but the
hrtimer will not be started which happens when the racing callback returns
HRTIMER_NORESTART. The hrtimer might never recover if all further requests
from the CPUs to subscribe to tick broadcast have timeout greater than the
next_event of tick broadcast clock device. This leads to cascading of
failures and finally noticed as rcu stall warnings

Here is a depiction of the race condition

CPU #1 (Running timer callback)                   CPU #2 (Enter idle
                                                  and subscribe to
                                                  tick broadcast)
---------------------                             ---------------------

__run_hrtimer()                                   tick_broadcast_enter()

  bc_handler()                                      __tick_broadcast_oneshot_control()

    tick_handle_oneshot_broadcast()

      raw_spin_lock(&tick_broadcast_lock);

      dev->next_event = KTIME_MAX;                  //wait for tick_broadcast_lock
      //next_event for tick broadcast clock
      set to KTIME_MAX since no other cores
      subscribed to tick broadcasting

      raw_spin_unlock(&tick_broadcast_lock);

    if (dev->next_event == KTIME_MAX)
      return HRTIMER_NORESTART
    // callback function exits without
       restarting the hrtimer                      //tick_broadcast_lock acquired
                                                   raw_spin_lock(&tick_broadcast_lock);

                                                   tick_broadcast_set_event()

                                                     clockevents_program_event()

                                                       dev->next_event = expires;

                                                       bc_set_next()

                                                         hrtimer_try_to_cancel()
                                                         //returns -1 since the timer
                                                         callback is active. Exits without
                                                         restarting the timer
  cpu_base->running = NULL;

The comment that hrtimer cannot be armed from within the callback is
wrong. It is fine to start the hrtimer from within the callback. Also it is
safe to start the hrtimer from the enter/exit idle code while the broadcast
handler is active. The enter/exit idle code and the broadcast handler are
synchronized using tick_broadcast_lock. So there is no need for the
existing try to cancel logic. All this can be removed which will eliminate
the race condition as well.

Fixes: 5d1638acb9 ("tick: Introduce hrtimer based broadcast")
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Balasubramani Vivekanandan <balasubramani_vivekanandan@mentor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190926135101.12102-2-balasubramani_vivekanandan@mentor.com
2019-09-27 14:45:55 +02:00
Sebastian Andrzej Siewior 902a9f9c50 tick: Mark tick related hrtimers to expiry in hard interrupt context
The tick related hrtimers, which drive the scheduler tick and hrtimer based
broadcasting are required to expire in hard interrupt context for obvious
reasons.

Mark them so PREEMPT_RT kernels wont move them to soft interrupt expiry.

Make the horribly formatted RCU_NONIDLE bracket maze readable while at it.

No functional change, 

[ tglx: Split out from larger combo patch. Add changelog ]

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.459144407@linutronix.de
2019-08-01 20:51:21 +02:00
Thomas Gleixner 58c5fc2b96 time: Remove useless filenames in top level comments
Remove the pointless filenames in the top level comments. They have no
value at all and just occupy space. While at it tidy up some of the
comments and remove a stale one.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: David Riley <davidriley@chromium.org>
Cc: Colin Cross <ccross@android.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lkml.kernel.org/r/20181031182252.794898238@linutronix.de
2018-11-23 11:51:20 +01:00
Sudeep Holla 234b3840d7 tick/broadcast-hrtimer: Use cpu_possible_mask for ce_broadcast_hrtimer
This is the last instance of cpu_all_mask usage in the core framework.

Replace it with cpu_possible_mask like all other instances in the
clockevent drivers. This makes it possible to add a warning in the core
clockevents_register_device on usage of cpu_all_mask from any clockevent
drivers in the future.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/1531308264-24220-2-git-send-email-sudeep.holla@arm.com
2018-08-02 14:55:52 +02:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Thomas Gleixner 2456e85535 ktime: Get rid of the union
ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.

Get rid of the union and just keep ktime_t as simple typedef of type s64.

The conversion was done with coccinelle and some manual mopping up.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25 17:21:22 +01:00
Jisheng Zhang 5130213721 tick/broadcast-hrtimer: Set name of the ce_broadcast_hrtimer
This is to avoid the "null" name when we either

~ # cat /sys/devices/system/clockevents/broadcast/current_device
(null)

or

~ # cat /proc/timer_list
...
Tick Device: mode:     1
Broadcast device
Clock Event Device: (null)
...

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1467709071-3667-1-git-send-email-jszhang@marvell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-05 17:02:19 +02:00
Viresh Kumar ecbebcb868 kernel: broadcast-hrtimer: Migrate to new 'set-state' interface
Migrate broadcast-hrtimer driver to the new 'set-state' interface
provided by clockevents core, the earlier 'set-mode' interface is marked
obsolete now.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-08-10 11:41:08 +02:00
Andreas Sandberg 38d23a6cc1 tick: hrtimer-broadcast: Prevent endless restarting when broadcast device is unused
The hrtimer callback in the hrtimer's tick broadcast code sometimes
incorrectly ends up scheduling events at the current tick causing the
kernel to hang servicing the same hrtimer forever. This typically
happens when a device is swapped out by
tick_install_broadcast_device(), which replaces the event handler with
clock_events_handle_noop() and sets the device mode to
CLOCK_EVT_MODE_UNUSED. If the timer is scheduled when this happens,
the next_event field will not be updated and the hrtimer ends up being
restarted at the current tick. To prevent this from happening, only
try to restart the hrtimer if the broadcast clock event device is in
one of the active modes and try to cancel the timer when entering the
CLOCK_EVT_MODE_UNUSED mode.

Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1429880765-5558-1-git-send-email-andreas.sandberg@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-05 15:34:21 +02:00
Thomas Gleixner b8a62f1ff0 tick: broadcast-hrtimer: Remove overly clever return value abuse
The assignment of bc_moved in the conditional construct relies on the
fact that in the case of hrtimer_start() invocation the return value
is always 0. It took me a while to understand it.

We want to get rid of the hrtimer_start() return value. Open code the
logic which makes it readable as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203503.404751457@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:52 +02:00
Preeti U Murthy a127d2bcf1 timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop
The hrtimer mode of broadcast queues hrtimers in the idle entry
path so as to wakeup cpus in deep idle states. The associated
call graph is :

	cpuidle_idle_call()
	|____ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, ....))
	     |_____tick_broadcast_set_event()
		   |____clockevents_program_event()
			|____bc_set_next()

The hrtimer_{start/cancel} functions call into tracing which uses RCU.
But it is not legal to call into RCU in cpuidle because it is one of the
quiescent states. Hence protect this region with RCU_NONIDLE which informs
RCU that the cpu is momentarily non-idle.

As an aside it is helpful to point out that the clock event device that is
programmed here is not a per-cpu clock device; it is a
pseudo clock device, used by the broadcast framework alone.
The per-cpu clock device programming never goes through bc_set_next().

Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: linuxppc-dev@ozlabs.org
Cc: mpe@ellerman.id.au
Cc: tglx@linutronix.de
Link: http://lkml.kernel.org/r/20150318104705.17763.56668.stgit@preeti.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23 10:50:05 +01:00
Preeti U Murthy 849401b66d tick: Fixup more fallout from hrtimer broadcast mode
The hrtimer mode of broadcast is supported only when
GENERIC_CLOCKEVENTS_BROADCAST and TICK_ONESHOT config options
are enabled. Hence compile in the functions for hrtimer mode
of broadcast only when these options are selected.
Also fix max_delta_ticks value for the pseudo clock device.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/52F719EE.9010304@linux.vnet.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-09 15:11:47 +01:00
Preeti U Murthy 5d1638acb9 tick: Introduce hrtimer based broadcast
On some architectures, in certain CPU deep idle states the local timers stop.
An external clock device is used to wakeup these CPUs. The kernel support for the
wakeup of these CPUs is provided by the tick broadcast framework by using the
external clock device as the wakeup source.

However not all implementations of architectures provide such an external
clock device. This patch includes support in the broadcast framework to handle
the wakeup of the CPUs in deep idle states on such systems by queuing a hrtimer
on one of the CPUs, which is meant to handle the wakeup of CPUs in deep idle states.

This patchset introduces a pseudo clock device which can be registered by the
archs as tick_broadcast_device in the absence of a real external clock
device. Once registered, the broadcast framework will work as is for these
architectures as long as the archs take care of the BROADCAST_ENTER
notification failing for one of the CPUs. This CPU is made the stand by CPU to
handle wakeup of the CPUs in deep idle and it *must not enter deep idle states*.

The CPU with the earliest wakeup is chosen to be this CPU. Hence this way the
stand by CPU dynamically moves around and so does the hrtimer which is queued
to trigger at the next earliest wakeup time. This is consistent with the case where
an external clock device is present. The smp affinity of this clock device is
set to the CPU with the earliest wakeup. This patchset handles the hotplug of
the stand by CPU as well by moving the hrtimer on to the CPU handling the CPU_DEAD
notification.

Originally-from: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: deepthi@linux.vnet.ibm.com
Cc: paulmck@linux.vnet.ibm.com
Cc: fweisbec@gmail.com
Cc: paulus@samba.org
Cc: srivatsa.bhat@linux.vnet.ibm.com
Cc: svaidy@linux.vnet.ibm.com
Cc: peterz@infradead.org
Cc: benh@kernel.crashing.org
Cc: rafael.j.wysocki@intel.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20140207080632.17187.80532.stgit@preeti.in.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-07 15:34:29 +01:00