The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC.
Add interrupt property to the temperature sensor for completeness.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC.
Add interrupt property to the temperature sensor for completeness.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC.
Add interrupt property to the temperature sensor for completeness.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC.
Add interrupt property to the temperature sensor and enable it in pinmux,
for completeness.
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the on-chip SoC thermal sensor to Tegra30 device-trees. Now CPU
temperature reporting and thermal throttling is available on all Tegra30
devices universally.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add initial version of device tree for Facebook Fuji (AST2600) BMC.
Fuji is Facebook's next generation switch platform with an AST2600 BMC
integrated for health monitoring purpose.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210805222818.8391-7-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add initial version of device tree for Facebook Elbert (AST2600) BMC.
Elbert is Facebook's next generation switch platform with an AST2600 BMC
integrated for health monitoring purpose.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210805222818.8391-6-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add initial version of device tree for Facebook Cloudripper (AST2600) BMC.
Cloudripper is Facebook's next generation switch platform with an AST2600
BMC integrated for health monitoring purpose.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210805222818.8391-5-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This common descirption is included by all Facebook AST2600 Network BMC
platforms to minimize duplicated device entries across Facebook Network
BMC device trees.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210805222818.8391-4-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Simplify wedge400 flash layout by using the common layout defined in
"facebook-bmc-flash-layout-128.dtsi".
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210805222818.8391-3-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is the layout used by Facebook BMC systems. It describes the fixed
flash layout of a 128MB mtd device.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210805222818.8391-2-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
When both the old and the new PCI drivers are enabled
in the same kernel, there are a couple of namespace
conflicts that cause a build failure:
drivers/pci/controller/pci-ixp4xx.c:38: error: "IXP4XX_PCI_CSR" redefined [-Werror]
38 | #define IXP4XX_PCI_CSR 0x1c
|
In file included from arch/arm/mach-ixp4xx/include/mach/hardware.h:23,
from arch/arm/mach-ixp4xx/include/mach/io.h:15,
from arch/arm/include/asm/io.h:198,
from include/linux/io.h:13,
from drivers/pci/controller/pci-ixp4xx.c:20:
arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h:221: note: this is the location of the previous definition
221 | #define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
|
drivers/pci/controller/pci-ixp4xx.c:148:12: error: 'ixp4xx_pci_read' redeclared as different kind of symbol
148 | static int ixp4xx_pci_read(struct ixp4xx_pci *p, u32 addr, u32 cmd, u32 *data)
| ^~~~~~~~~~~~~~~
Rename both the ixp4xx_pci_read/ixp4xx_pci_write functions and the
IXP4XX_PCI_CSR macro. In each case, I went with the version that
has fewer callers to keep the change small.
Fixes: f7821b4934 ("PCI: ixp4xx: Add a new driver for IXP4xx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: soc@kernel.org
Link: https://lore.kernel.org/r/20210721151546.2325937-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The platform lost the framebuffer due to a commit solving a
circular dependency in v5.14-rc1, so add it back in by explicitly
selecting the framebuffer.
Also fix up some Kconfig options that got dropped or moved around
while we're at it.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210807225518.3607126-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add defconfig entries for new SoC: SAMA7G5
- dedicated sama7_defconfig which avoids having to carry older drivers
and dependencies from the sama5 family:
CACHE_L2X0, CAN_AT91, TOUCHSCREEN_ADC, AT91SAM9X_WATCHDOG,
VIDEO_ATMEL_ISI, SND_ATMEL_SOC_I2S, MMC_ATMELMCI, AT_HDMAC, AT91_ADC,
REGULATOR_ACT*
Addition of new drivers that are not part of any sama5 SoC:
SND_MCHP_SOC_I2S_MCC, SND_MCHP_SOC_SPDIFTX|RX, MICROCHIP_PIT64B
plus upcoming MIPI pipeline, audio sample rate converter, ...
It also maintains both sama5 and sama7 defconfig tailored for their
respective families and easy to identify.
- addition to the generic multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYREvjgAKCRAfOrpwrNPN
DBc1AP4/HkSrWp57ElCSIwIY2vCZrOEbeRROxOgO5j/mdoB4qwEArsEEnZGHwpO3
TYjdyGt4yLR9kmaYBmWnDfI8loz0HQw=
=sVC8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=g9Op
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.15:
- add defconfig entries for new SoC: SAMA7G5
- dedicated sama7_defconfig which avoids having to carry older drivers
and dependencies from the sama5 family:
CACHE_L2X0, CAN_AT91, TOUCHSCREEN_ADC, AT91SAM9X_WATCHDOG,
VIDEO_ATMEL_ISI, SND_ATMEL_SOC_I2S, MMC_ATMELMCI, AT_HDMAC, AT91_ADC,
REGULATOR_ACT*
Addition of new drivers that are not part of any sama5 SoC:
SND_MCHP_SOC_I2S_MCC, SND_MCHP_SOC_SPDIFTX|RX, MICROCHIP_PIT64B
plus upcoming MIPI pipeline, audio sample rate converter, ...
It also maintains both sama5 and sama7 defconfig tailored for their
respective families and easy to identify.
- addition to the generic multi_v7_defconfig
* tag 'at91-defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: multi_v7_defconfig: add sama7g5 SoC
ARM: configs: at91: add defconfig for sama7 family of SoCs
Link: https://lore.kernel.org/r/20210809134521.10155-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A series of changes to update am3 to use cpsw switch driver and
few updates to earlier SanCloud changes. The plan was to send the
cpsw switch driver changes earlier but looks like I never tagged
the mail thread in my inbox to apply for v5.15.
-----BEGIN PGP SIGNATURE-----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=qPV9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7Hv9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.15/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Changes for am3 cpsw and SanCloud for v5.15
A series of changes to update am3 to use cpsw switch driver and
few updates to earlier SanCloud changes. The plan was to send the
cpsw switch driver changes earlier but looks like I never tagged
the mail thread in my inbox to apply for v5.15.
* tag 'omap-for-v5.15/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-sancloud-bbe: Drop usb wifi comment
ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs
ARM: dts: am335x-bone: switch to new cpsw switch drv
ARM: dts: am33xx: update ethernet aliases
ARM: dts: am335x-sl50: switch to new cpsw switch drv
ARM: dts: am335x-shc: switch to new cpsw switch drv
ARM: dts: am335x-phycore: switch to new cpsw switch drv
ARM: dts: am335x-pepper: switch to new cpsw switch drv
ARM: dts: am335x-pdu001: switch to new cpsw switch drv
ARM: dts: am335x-osd3358-sm-red: switch to new cpsw switch drv
ARM: dts: am335x-myirtech: switch to new cpsw switch drv
ARM: dts: am335x-moxa-uc: switch to new cpsw switch drv
ARM: dts: am335x-lxm: switch to new cpsw switch drv
ARM: dts: am335x-igep0033: switch to new cpsw switch drv
ARM: dts: am335x-cm-t335: switch to new cpsw switch drv
ARM: dts: am335x-chiliboard: switch to new cpsw switch drv
ARM: dts: am335x-nano: switch to new cpsw switch drv
ARM: dts: am335x-baltos: switch to new cpsw switch drv
Link: https://lore.kernel.org/r/pull-1628751694-126144@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix up some (non-urgent) IRQ flags for the PCI buses.
- Add the second UART to the generic ixp4xx.dtsi
- Make use of the new expansion bus driver in all device
trees with e.g. flash memory on the expansion bus.
- Adds the CF card slot to the Gateworks GW2358.
- Add new device trees for:
- Iomega NAS 100D
- D-Link DSM-G600
- Netgear WG302v2
- Arcom Vulcan
- Gateworks Avila GW2348
- Intel IXPD425 and siblings
- Coyote and IXDPG425
- Linksys WRV54G
-----BEGIN PGP SIGNATURE-----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=ig2J
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8Yz2
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dts-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS file updates for the v5.15 kernel cycle:
- Fix up some (non-urgent) IRQ flags for the PCI buses.
- Add the second UART to the generic ixp4xx.dtsi
- Make use of the new expansion bus driver in all device
trees with e.g. flash memory on the expansion bus.
- Adds the CF card slot to the Gateworks GW2358.
- Add new device trees for:
- Iomega NAS 100D
- D-Link DSM-G600
- Netgear WG302v2
- Arcom Vulcan
- Gateworks Avila GW2348
- Intel IXPD425 and siblings
- Coyote and IXDPG425
- Linksys WRV54G
* tag 'ixp4xx-dts-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ixp4xx: Add a devicetree for Freecom FSG-3
ARM: dts: ixp4xx: Add devicetree for Linksys WRV54G
ARM: dts: ixp4xx: Add device trees for Coyote and IXDPG425
ARM: dts: ixp4xx: Add Intel IXDP425 etc reference designs
ARM: dts: ixp4xx: Add CF to GW2358
ARM: dts: ixp4xx: Add Gateworks Avila GW2348 device tree
ARM: dts: ixp4xx: Add Arcom Vulcan device tree
ARM: dts: ixp4xx: Add devicetree for Netgear WG302v2
ARM: dts: ixp4xx: Use the expansion bus
ARM: dts: ixp4xx: Add second UART
ARM: dts: ixp4xx: Add devicetree for D-Link DSM-G600 rev A
ARM: dts: ixp4xx: Move EPBX100 flash to external bus node
ARM: dts: ixp4xx: Add devicetree for Iomega NAS 100D
ARM: dts: ixp4xx: Fix up bad interrupt flags
Link: https://lore.kernel.org/r/CACRpkdY19AvWT--OcmEKbwFue_EcThVs7uZeHkzORten7xj-RA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps to configure more devices, and
add support for new SoC variants and devices:
- Add add gpio-line-names for am335x-boneblue
- Add support for dra762 abz package
- Two patches for McASP support on omap4
- Three patches to add support for am335x-sancloud-bbe-lite
- A series of changes to configure PRUSS for am3/4/5
-----BEGIN PGP SIGNATURE-----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=tnQt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7+WI
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.15
Devicetree changes for omaps to configure more devices, and
add support for new SoC variants and devices:
- Add add gpio-line-names for am335x-boneblue
- Add support for dra762 abz package
- Two patches for McASP support on omap4
- Three patches to add support for am335x-sancloud-bbe-lite
- A series of changes to configure PRUSS for am3/4/5
* tag 'omap-for-v5.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am57xx: Add PRUSS MDIO controller nodes
ARM: dts: am57xx: Add PRU-ICSS nodes
ARM: dts: am4372: Add PRUSS MDIO controller node
ARM: dts: am4372: Add the PRU-ICSS0 DT node
ARM: dts: am4372: Add the PRU-ICSS1 DT node
ARM: dts: am335x-icev2: Enable PRU-ICSS module
ARM: dts: am335x-evmsk: Enable PRU-ICSS module
ARM: dts: am335x-evm: Enable PRU-ICSS module
ARM: dts: am335x-bone-common: Enable PRU-ICSS node
ARM: dts: am33xx-l4: Add PRUSS MDIO controller node
ARM: dts: am33xx-l4: Add PRUSS node
ARM: dts: am335x-sancloud-bbe-lite: New devicetree
ARM: dts: am335x-sancloud-bbe: Extract common code
ARM: dts: am335x-boneblack: Extract HDMI config
ARM: dts: omap4-l4-abe: Add McASP configuration
ARM: dts: omap4-l4-abe: Correct sidle modes for McASP
ARM: dts: Add support for dra762 abz package
ARM: dts: am335x-boneblue: add gpio-line-names
Link: https://lore.kernel.org/r/pull-1628153040-834155@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It includes all required changes for handling i.MX6/7 eCSPI errata
ERR009165, which causes FIFO transfer to be sent twice in DMA mode.
Both SPI and DMA maintainers agree to merge it through arm-soc tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmEQ1REUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7w5ggAhpcDrpO7eimqPmkr/8FxI6WLGh/t
OjsAM+WVlAlHMPRC53r94Ot8q1XbenkA8Cr3hA88cJS+Hx2WunyXL4szUO+Bh/A5
o/ZpMPbitea7wQRVJkVX0AsBrvJ4hj+MQmlk31Kd2Jk7Ptpo3hoPb1J7Lg2Fou3K
g6nAELMSxa8+/1xt2AkNJppnDp6eRcOsc3yqO+7SsTGlr2JzB6SN21yvOzLWd8+Y
4v3J3a84G/w6vUlSa5mloIbGOOkyxEYitLBPrgjc5AvPjJEc0m/QlArmnuaGn1j+
LXfPFNDIlG5EIvF5HzrXMl6z8E4pGx7hWgDG/4SDWvYcbhlggtLnmra4Tg==
=bmM2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iV7U
-----END PGP SIGNATURE-----
Merge tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX eCSPI errata handling for 5.15:
It includes all required changes for handling i.MX6/7 eCSPI errata
ERR009165, which causes FIFO transfer to be sent twice in DMA mode.
Both SPI and DMA maintainers agree to merge it through arm-soc tree.
* tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dmaengine: imx-sdma: add terminated list for freed descriptor in worker
dmaengine: imx-sdma: add uart rom script
dma: imx-sdma: add i.mx6ul compatible name
dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
spi: imx: remove ERR009165 workaround on i.mx6ul
spi: imx: fix ERR009165
dmaengine: imx-sdma: add mcu_2_ecspi script
dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
dmaengine: imx-sdma: remove duplicated sdma_load_context
Revert "dmaengine: imx-sdma: refine to load context only once"
Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
Link: https://lore.kernel.org/r/20210809071838.GF30984@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I managed to miss applying two out of three Kconfig changes earlier
to drop unused entries, here are the missed changes.
-----BEGIN PGP SIGNATURE-----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=JGa6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=YvnO
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.15/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
Two missed SoC changes for omaps for v5.15
I managed to miss applying two out of three Kconfig changes earlier
to drop unused entries, here are the missed changes.
* tag 'omap-for-v5.15/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
Link: https://lore.kernel.org/r/pull-1628751694-126144@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Updating the tegra_defconfig was omitted, when the ChromeOS EC config
options were renamed by a previous commit. Fix it.
Fixes: 67c70aa86f ("arm/arm64: defconfig: Update configs to use the new CROS_EC options")
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously CONFIG_FB was auto-selected, now it's not. We completely lost
framebuffer in tegra_defconfig. Select the CONFIG_FB to fix it.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Both PMC and cpuidle drivers are probed at the same init level and
cpuidle depends on the PMC suspend mode. Add new default suspend mode
that indicates whether PMC driver has been probed and reset the mode in
a case of deferred probe of the PMC driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move mt8135-pinfunc.h into include/dt-bindings/pinctrl so that we can
include it in yaml examples.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210804044033.3047296-1-hsinyi@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYPkvsg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl8pwCff+mL/zOaU8M1KwIHrEvNH6LgF58AoKgBAeCb
58Lenmw44ofP5itzU5x3
=J5mO
-----END PGP SIGNATURE-----
Merge tag 'bus_remove_return_void-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into drm-next
Bus: Make remove callback return void tag
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixed up merge conflict in drm]
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/YPkwQwf0dUKnGA7L@kroah.com
The merge_fdt_bootargs() function by definition consumes more than 1024
bytes of stack because it has a 1024 byte command line on the stack,
meaning that we always get a warning when building this file:
arch/arm/boot/compressed/atags_to_fdt.c: In function 'merge_fdt_bootargs':
arch/arm/boot/compressed/atags_to_fdt.c:98:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
However, as this is the decompressor and we know that it has a very shallow
call chain, and we do not actually risk overflowing the kernel stack
at runtime here.
This just shuts up the warning by disabling the warning flag for this
file.
Tested on Nexus 7 2012 builds.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
This fixes a Keystone 2 regression discovered as a side effect of
defining an passing the physical start/end sections of the kernel
to the MMU remapping code.
As the Keystone applies an offset to all physical addresses,
including those identified and patches by phys2virt, we fail to
account for this offset in the kernel_sec_start and kernel_sec_end
variables.
Further these offsets can extend into the 64bit range on LPAE
systems such as the Keystone 2.
Fix it like this:
- Extend kernel_sec_start and kernel_sec_end to be 64bit
- Add the offset also to kernel_sec_start and kernel_sec_end
As passing kernel_sec_start and kernel_sec_end as 64bit invariably
incurs BE8 endianness issues I have attempted to dry-code around
these.
Tested on the Vexpress QEMU model both with and without LPAE
enabled.
Fixes: 6e121df14c ("ARM: 9090/1: Map the lowmem and kernel separately")
Reported-by: Nishanth Menon <nmenon@kernel.org>
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Nishanth Menon <nmenon@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The conditional by the generic header is the same,
hence drop unnecessary duplication.
Link: https://lore.kernel.org/r/20210510114107.43006-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Currently, the (z/u)install targets in arch/arm/Makefile descend into
arch/arm/boot/Makefile to invoke the shell script, but there is no
good reason to do so.
arch/arm/Makefile can run the shell script directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Rename module_init & module_exit functions that are named
"mod_init" and "mod_exit" so that they are unique in both the
System.map file and in initcall_debug output instead of showing
up as almost anonymous "mod_init".
This is helpful for debugging and in determining how long certain
module_init calls take to execute.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The wifi chip on USB port 4 may not be present on all BBE variants.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
pinctrl settings for the USB hub, barometer & accelerometer need to be
referenced from the relevant nodes to work.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Setting the ->dma_address to DMA_MAPPING_ERROR is not part of the
->map_sg calling convention, so remove it.
Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The .map_sg() op now expects an error code instead of zero on failure.
In the case of a DMA_MAPPING_ERROR, -EIO is returned. Otherwise,
-ENOMEM or -EINVAL is returned depending on the error from
__map_sg_chunk().
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The i.MX7 has two possible Flex Timers, disabled by default. Moreover, the
block is the same as LS1021a, then the drivers can be used as-is.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT for DH DRC02 unit, which is a universal controller device.
The system has two ethernet ports, two CANs, RS485 and RS232, USB,
capacitive buttons and an OLED display.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom
board-to-board expansion connector.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DH electronics PDK2 can be populated with SoM with i.MX6S/DL/D/Q
variants. Split the SoC-independent parts of the SoM and PDK2 into the
imx6qdl-dhcom-*.dtsi and reduce imx6q-dhcom-pdk2.dts to example of
adding i.MX6S/DL/D/Q variants of the SoM into a PDK2 carrier board.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Following cleanups of the devicetrees done, no change in function:
- Remove parentheses from the license
- Update copyright date
- Alphabetical sorting
- Add comments
- Update pinctrl names
- Hex values in lower case
- Set 3rd values of fixed regulators gpio property to 0
- Replace interrupt type with a define
- Remove superfluous property max-speed from the fec node
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move iomux to the end, no change in function.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The function of each SoM pins is defined in the DHCOM standard [1] and
subset of them is defined as GPIOs (pins A-W). To ensure the interchange-
ability of the DHCOM SoMs, the function of the pins are fixed and cannot
be changed. On board level the DHCOM GPIOs can be used associated with
different blocks e.g. for interrupt or reset, but the function is always
GPIO. If not used, they can be freely used in the user space.
Therefore the whole configuration of SoM pins is made in the SoM DT.
Defining the DHCOM GPIO pins as a separate pinctrl nodes makes moving a
subset of them to an appropriate block pinctrl group easier on board level,
since it is not necessary to have a large pinctrl hog group containing
unrelated pinmux entries on board level. This also makes it easy to update
the SoM DT without having to update all the board DTs too. If necessary it
is also possible to change the electrical properties of the DHCOM GPIOs by
overwriting the pinctrl on board level.
[1] https://wiki.dh-electronics.com/images/2/2e/DOC_DHCOM-Standard-Specification_R01_2016-11-17.pdf
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PDK2 board is capable of running both 100M and 1G ethernet. However,
the i.MX6 has only one ethernet MAC, so it is possible to configure
either 100M or 1G Ethernet. In case of 100M option, the PHY is on the
SoM and the signals are routed to a RJ45 port. For 1G the PHY is on
the PDK2 board with another RJ45 port. 100M and 1G ethernet use
different signal pins from the i.MX6, but share the MDIO bus.
This SoM board combination is used to demonstrate how to enable 1G
ethernet configuration.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We need the fixes in here as well, and resolves some merge issues with
the mhi codebase.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a devicetree for the Freecom FSG-3, a combined router
and NAS.
Cc: Rod Whitby <rod@whitby.id.au>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a device tree for the Linksys WRV54G also known as
Gemtek GTWX5715. Some enhancements have been folded in from the
OpenWrt patches.
This supports everything in the upstream kernel with placeholders
for the out-of-tree multiphy which exist in OpenWrt.
Cc: phj@phj.hu
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds device trees for the ADI Engineering Coyote and the
Intel IXDPG425 reference design. The ethernet set-up on the
IXDPG425 is a bit dubious because I think it uses a DSA
switch chip, but this is a good as it gets right now.
The Coyote boardfile claims an IDE port exist at 0xFFFE1000
but the implementation does not use this. If you have the
board and can/want to test, please contact me.
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The IXDP425, IXCDP1100, KIXRP435 and IXDP465 are similar Intel reference
designs for IXP42x, IXP43x and IXP4[56]x.
This adds device trees for these so the board files can be migrated.
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a device tree file for the Gateworks Avila GW2348 platform
supporting all the features of the in-kernel boardfiles.
There are more boards in the Avila family, but this is the one that
is supported out-of-the-box by the current boardfiles. Some extra
features have been folded in from the upstream OpenWrt sources,
such as proper ethernet setup for both ethernet ports.
More variants can be added based on this device tree. Some of those
have DSA switches, multiple LEDs, multiple serial ports and similar
and would need some more elaborate work.
Cc: Michael-Luke Jones <mlj28@cam.ac.uk>
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Tom Billman <kernel@giantshoulderinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a devicetree for the Netgear WG302v2 router.
The DTS is mostly based on the upstream boardfile but I also
added in the ethernet from OpenWrt to get a more complete
system.
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace the "simple-bus" simplification by the proper bus for
IXP4xx memory or device expansion.
Use chip-select addressing with two address cells on all the
flashes mounted on the IXP4xx devices. This includes all flash
chips.
Change the unit-name from @50000000 to @c4000000 as the DTS
validation screams. The registers for controlling the bus are
at c4000000 but the actual memory windows and ranges are at
50000000. Well it is just syntax, we can live with it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The IXP4xx has two UARTs and some platforms make use of the
second one so add this to the include DTSI.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a devicetree for the D-Link DSM-G600 Wireless Network
Storage Enclosure so that we can delete the boardfile. The boardfile
does not even define an ethernet interface as it has an external
ethernet on PCI. This devicetree is for revision A using IXP420
the rev B version uses PowerPC.
Cc: Michael-Luke Jones <mlj28@cam.ac.uk>
Cc: Rod Whitby <rod@whitby.id.au>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Michael Westerhof <mwester@dls.net>
Cc: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This moves the EPBX100 flash under the external bus on CS0
like on the other IXP4xx systems.
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This creates a more or less fully featured device tree for the
IXP42x-based Iomega NAS 100D.
We can't read out the raw flash contents for ethernet MAC, and
we cannot handle a power-off-button inside the kernel like the
boardfile does. These two things are normally done in userspace.
This conversion is part of moving all of the IXP4xx board files
over to device tree to modernize the IXP4xx kernel.
Cc: Rod Whitby <rod@whitby.id.au>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The PCI hosts had bad IRQ semantics, these are all active low.
Use the proper define and fix all in-tree users.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The board features a 128MiB NAND chip and recently linux gained support
for the NAND controller on the Zynq SoC. Thus add the corresponding
devicetree nodes.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210616155437.27378-4-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Recently, a driver for the ARM Primecell PL35x static memory controller
(including NAND controller) was added in linux. Add the corresponding
device tree node.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210616155437.27378-3-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
After years, linux finally got a driver for the PL35x NAND controller
found on the Xilinx Zynq-7000 SoC for example. Enable support for this
driver.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210616155437.27378-2-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The STiH418 embedded the same sensor as the STiH410.
This commit adds the corresponding node, relying on the st_thermal
driver.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The rng11 is not available on the STiH418 hence is disabled in the
stih418.dtsi
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The STiH407 family (and further versions STiH410/STiH418) embedded
a serial flash controller allowing fast access to SPI-NOR.
This commit adds the corresponding node, relying on the st-spi-fsm
drivers.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The OMAP_PACKAGE_* Kconfig entries are no longer referenced
in the kernel so can be dropped as they're obsolete.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The MACH_OMAP3_PANDORA is no longer referenced anywhere in the kernel
options so it can now be dropped as the board has long moved to DT.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, Switch BeagleBone boards to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port.
For am335x-sancloud-bbe-common.dtsi also removed duplicated davinci_mdio DT
nodes which already defined in am335x-bone-common.dtsi.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Update ethernet aliases to point at CPSW switchdev driver.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Toby Churchill SL50 Series to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Bosch SHC to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Phytec AM335x phyCORE SOM, phyBOARD-WEGA, phyBOARD-REGOR,
PCM-953 to use new cpsw switch driver. Those boards have or 2 Ext. port
wired and configured in dual_mac mode by default, or only 1 Ext. port.
Cc: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Gumstix Pepper to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch EETS,PDU001 to use new cpsw switch driver. Those boards have or
2 Ext. port wired and configured in dual_mac mode by default, or only 1
Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Octavo Systems OSD3358-SM-RED to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch MYIR MYC-AM335X/MYD-AM335X to use new cpsw switch driver. Those
boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Moxa am335x-moxa-uc-210x/8100 to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Cc: Johnson Chen <johnsonch.chen@moxa.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch NovaTech OrionLXm to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch am335x-igep0033 to use new cpsw switch driver. Those boards have
or 2 Ext. port wired and configured in dual_mac mode by default, or only 1
Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch CompuLab CM-T335 to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch AM335x Chiliboard to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Newflow AM335x NanoBone to use new cpsw switch driver. Those
boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch OnRISC Baltos and NetCom/Cam boards to use new cpsw switch
driver. Those boards have or 2 Ext. port wired and configured in dual_mac
mode by default, or only 1 Ext. port.
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Christina Quast <cquast@hanoverdisplays.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This file is licensed in some kind of BSD manner, put it under
the combined GPL+BSD license like what the bindings use, it
seems most helpful.
I wrote the whole file so whatever. Those are my principles,
if you don't like them: I have others.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210409124954.320529-1-linus.walleij@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Castor has a BCM4339 attached to BLSP2 UART7, add the necessary nodes to
define the uart as well as the serdev BCM.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Julian Weigt <juw@posteo.de>
Link: https://lore.kernel.org/r/20210723202101.65371-2-juw@posteo.de
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
PPD has only one ACHC device, which effectively is a Kinetis
microcontroller. It has one SPI interface used for normal
communication. Additionally it's possible to flash the device
firmware using NXP's EzPort protocol by correctly driving a
second chip select pin and the device reset pin.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210802172309.164365-3-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MT7623/BPI-R2 has idle temperature after bootup from 48 degrees celsius
increase the passive trip temp threshold to not trottle CPU frequency at
this temperature
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20210725163451.217610-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- add new SoC based on a Cortex-A7 core: the SAMA7G5 family
- mach-at91 entry, Kconfig and header files
- Power Management Controller (PMC) code and associated power management
changes. Support for suspend/resume, Ultra Low Power modes and
Backup with Memory in Self-Refresh mode.
- Power management association with DDR controller and
shutdown controller for addressing this variety of modes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYQpPnQAKCRAfOrpwrNPN
DJyeAQDvS538E7jFPdsmUn3iZhMhV4zCZVsPk9fox9ptV8ewEAD/QuWFZg78YkZE
vGe/AXlxjA4V/TMiGElf0/nbZ8xLiw4=
=YucO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+KcA
-----END PGP SIGNATURE-----
Merge tag 'at91-soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc
AT91 soc for 5.15:
- add new SoC based on a Cortex-A7 core: the SAMA7G5 family
- mach-at91 entry, Kconfig and header files
- Power Management Controller (PMC) code and associated power management
changes. Support for suspend/resume, Ultra Low Power modes and
Backup with Memory in Self-Refresh mode.
- Power management association with DDR controller and
shutdown controller for addressing this variety of modes.
* tag 'at91-soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (26 commits)
ARM: at91: pm: add sama7g5 shdwc
ARM: at91: pm: add pm support for SAMA7G5
ARM: at91: sama7: introduce sama7 SoC family
ARM: at91: pm: add sama7g5's pmc
ARM: at91: pm: add backup mode support for SAMA7G5
ARM: at91: pm: save ddr phy calibration data to securam
ARM: at91: pm: add sama7g5 ddr phy controller
ARM: at91: pm: add sama7g5 ddr controller
ARM: at91: pm: wait for ddr power mode off
ARM: at91: pm: add support for 2.5V LDO regulator control
ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes
ARM: at91: pm: add self-refresh support for sama7g5
ARM: at91: ddr: add registers definitions for sama7g5's ddr
ARM: at91: sfrbu: add sfrbu registers definitions for sama7g5
ARM: at91: pm: add support for waiting MCK1..4
ARM: at91: pm: s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g
ARM: at91: pm: avoid push and pop on stack while memory is in self-refersh
ARM: at91: pm: use r7 instead of tmp1
ARM: at91: pm: do not initialize pdev
ARM: at91: pm: check for different controllers in at91_pm_modes_init()
...
Link: https://lore.kernel.org/r/20210804084316.12641-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New device trees for these mobile phones:
- Samsung Gavini
- Samsung Codina
- Samsung Kyle
- Flag eMMC cards as non-SD non-SDIO to save time
- Link USB PHY to USB controller in the device tree
- Fix up the operating points to the actual clock frequencies
-----BEGIN PGP SIGNATURE-----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=iBYE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xBsz
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Ux500 Device Tree updates for the v5.15 kernel cycle:
- New device trees for these mobile phones:
- Samsung Gavini
- Samsung Codina
- Samsung Kyle
- Flag eMMC cards as non-SD non-SDIO to save time
- Link USB PHY to USB controller in the device tree
- Fix up the operating points to the actual clock frequencies
* tag 'ux500-dts-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Adjust operating points to reality
ARM: dts: ux500: Add a device tree for Kyle
ARM: dts: ux500: Add devicetree for Codina
ARM: dts: ux500: ab8500: Link USB PHY to USB controller node
ARM: dts: ux500: Flag eMMCs as non-SDIO/SD
ARM: dts: ux500: Add device tree for Samsung Gavini
Link: https://lore.kernel.org/r/CACRpkdbjBv5ywZZD8rK07d5sLcHsG8o4iYD-3jHO=HLg6-nKnA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The MaverickCrunch support for ep93xx never made it into glibc and
was removed from gcc in its 4.8 release in 2012. It is now one of
the last parts of arch/arm/ that fails to build with the clang
integrated assembler, which is unlikely to ever want to support it.
The two alternatives are to force the use of binutils/gas when
building the crunch support, or to remove it entirely.
According to Hartley Sweeten:
"Martin Guy did a lot of work trying to get the maverick crunch working
but I was never able to successfully use it for anything. It "kind"
of works but depending on the EP93xx silicon revision there are still
a number of hardware bugs that either give imprecise or garbage results.
I have no problem with removing the kernel support for the maverick
crunch."
Unless someone else comes up with a good reason to keep it around,
remove it now. This touches mostly the ep93xx platform, but removes
a bit of code from ARM common ptrace and signal frame handling as well.
If there are remaining users of MaverickCrunch, they can use LTS
kernels for at least another five years before kernel support ends.
Link: https://lore.kernel.org/linux-arm-kernel/20210802141245.1146772-1-arnd@kernel.org/
Link: https://lore.kernel.org/linux-arm-kernel/20210226164345.3889993-1-arnd@kernel.org/
Link: https://github.com/ClangBuiltLinux/linux/issues/1272
Link: https://gcc.gnu.org/legacy-ml/gcc/2008-03/msg01063.html
Cc: "Martin Guy" <martinwguy@martinwguy@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When using Yocto's Ptest DISTRO_FEATURE the CONFIG_SCSI_DEBUG=m option
is added, but it cannot be selected as it depends on CONFIG_SCSI_LOWLEVEL.
This generates a build warning saying that the CONFIG_SCSI_DEBUG=m option
is discarded.
Fix this by letting CONFIG_SCSI_LOWLEVEL to be selected.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some fixes for regressions and boot issues for various devices:
- Fix gpt12 system timer regression on earlier beagleboard revisions
- Fix potential NULL pointer access for omap_hwmod_get_pwrdm()
- Disable RNG on secure am335x variants as it's not accessible
- Fix flakey DCDC2 voltage causing hangs on am43x-epos-evm by reducing
i2c0 bus speed for tps65218
- Fix typo for am437x-l4 can@0 node
- Fix omap5 regression caused by vdds_1v8_main fixed-regulator
-----BEGIN PGP SIGNATURE-----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=Ismq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2UNB
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.14-rc series
Some fixes for regressions and boot issues for various devices:
- Fix gpt12 system timer regression on earlier beagleboard revisions
- Fix potential NULL pointer access for omap_hwmod_get_pwrdm()
- Disable RNG on secure am335x variants as it's not accessible
- Fix flakey DCDC2 voltage causing hangs on am43x-epos-evm by reducing
i2c0 bus speed for tps65218
- Fix typo for am437x-l4 can@0 node
- Fix omap5 regression caused by vdds_1v8_main fixed-regulator
* tag 'omap-for-v5.14/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
ARM: dts: am437x-l4: fix typo in can@0 node
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
bus: ti-sysc: AM3: RNG is GP only
ARM: omap2+: hwmod: fix potential NULL pointer access
bus: ti-sysc: Fix gpt12 system timer issue with reserved status
Link: https://lore.kernel.org/r/pull-1627995895-406133@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The PRUSSs on AM57xx SoCs contain an MDIO controller that can
be used to control external PHYs associated with the Industrial
Ethernet peripherals within each PRUSS. The MDIO module used
within the PRU-ICSS is an instance of the MDIO Controller used
in TI Davinci SoCs. The same bus frequency of 1 MHz is chosen as
the regular MDIO node.
The nodes are added in the common am57-pruss.dtsi file and enabled
by default, but are disabled in all the existing AM57xx board dts
files. These nodes need pinctrl lines, and so should be enabled
only on boards where they are actually wired and pinned out for
PRUSS Ethernet. Any new board dts file should disable these if
they are not sure.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the DT nodes for the PRU-ICSS1 and PRU-ICSS2 processor subsystems
that are present on AM57xx family of SoCs. Each PRU-ICSS instance is
represented by a pruss node and other child nodes. The two PRU-ICSSs
are identical to each other. They are not supported on DRA7xx SoCs in
general, so the nodes are added under the respective interconnect target
module nodes in a common am57-pruss.dtsi file. The file is already
included only in the AM57xx related board files.
The PRU-ICSSs on AM57xx are very similar to the PRUSS in AM33xx and AM437x
except for variations in the RAM sizes and the number of interrupts coming
into the MPU INTC. The interrupt events into the PRU-ICSS also requires
programming of the corresponding crossbars properly.
The PRUSS subsystem node contains the entire address space. The various
sub-modules of the PRU-ICSS are represented as individual child nodes
(so platform devices themselves) of the PRUSS subsystem node. These
include the two PRU cores and the interrupt controller. All the Data
RAMs are represented within a child node of its own named 'memories'
without any compatible. The Real Time Media Independent Interface
controller (MII_RT), and the CFG sub-module are represented as syscon
nodes. The PRUSS CFG module has a clock mux for IEP clock, this clk
node is added under the CFG child node 'clocks'. The default source
for this mux clock is the ICSS_IEP_CLK clock.
The DT nodes use all standard properties. The regs property in the PRU
nodes define the addresses for the Instruction RAM, the Debug and Control
sub-modules for that PRU core. The firmware for each PRU core is defined
through a 'firmware-name' property.
The default names for the firmware images for each PRU core are defined
as follows (these can be adjusted either in derivative board dts files or
through sysfs at runtime if required):
PRU-ICSS1 PRU0 Core: am57xx-pru1_0-fw
PRU-ICSS1 PRU1 Core: am57xx-pru1_1-fw
PRU-ICSS2 PRU0 Core: am57xx-pru2_0-fw
PRU-ICSS2 PRU1 Core: am57xx-pru2_1-fw
Note:
1. There are few more sub-modules like the Industrial Ethernet Peripheral
(IEPs), MDIO, UART, eCAP that do not have bindings and so will be added
in the future.
2. The PRUSS INTC on AM57xx SoCs also connect the host interrupts 6 and 7
as possible DMA events, so use the 'ti,irqs-reserved' property in
derivative board dts files _if_ any of them should not be handled by
the host OS.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PRU-ICSS1 instance on AM437x SoCs has a MDIO sub-module that
can be used to control external PHYs associated with the Industrial
Ethernet peripherals within the PRUSS. The MDIO module used within
this PRU-ICSS is an instance of the MDIO Controller used in TI
Davinci SoCs. The same bus frequency of 1 MHz is chosen as the
regular MDIO node. Note that there is no MDIO node added to the
smaller PRU-ICSS0 instance as the MDIO pins are not pinned out.
The node is added and enabled in the common am4372.dtsi file by
default, and disabled in all the existing AM437x board dts files.
This node needs pinctrl lines, and so should be enabled only on
boards where they are actually wired and pinned out for PRUSS
Ethernet. Any new board dts file should disable these if they
are not sure.
Signed-off-by: Andrew F. Davis <afd@ti.com>
[s-anna@ti.com: fix reg address, add commit description]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The AM4376+ SoCs have a second smaller PRU-ICSS subsystem (PRUSS0) in
addition to the primary PRUSS1 instance. The PRUSS0 has less DRAM
per PRU, and no Shared DRAM among other minor differences. The IEP
and MII_RT modules even though present within the IP are not pinned
out.
This PRUSS0 instance has a weird SoC integration. It shares the same
L3 OCP interconnect interface with PRUSS1, and also shares its reset
line and clocks. Any external accesses from PRUSS0 requires the PRUSS1's
PRUSS_SYSCFG register to be programmed properly. That said, it is its
own IP instance (a cut-down version), and so it has been added as an
independent node (sibling node to PRUSS1 node) and a child node of the
corresponding PRUSS target module interconnect node. This allows the
PRUSS0 instance to be enabled/disabled independently of the PRUSS1
instance.
The nodes are added under the corresponding interconnect target module
node in the common am4372 dtsi file. The PRU-ICSS instances are not
supported on AM4372 SoC though in the AM437x family, so the interconnect
target module node should be disabled in any derivative board dts file that
uses AM4372 SoCs. The individual PRUSS node can be disabled in the
corresponding board dts file if desired.
The default names for the firmware images for each PRU core are defined
as follows (these can be adjusted either in derivative board dts files or
through sysfs at runtime if required):
PRU-ICSS0 PRU0 Core: am437x-pru0_0-fw
PRU-ICSS0 PRU1 Core: am437x-pru0_1-fw
Note:
1. There are few more sub-modules like the Industrial Ethernet Peripheral
(IEP), eCAP, UART, that do not have bindings and so will be added in the
future. Only UART is pinned out, so others should be added in disabled
state if added.
2. The PRUSS0 INTC on AM437x SoCs routes the host interrupt 5 to the other
PRUSS1, so it is already marked reserved through the 'ti,irqs-reserved'
property.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the DT node for the PRU-ICSS1 instance on the AM437x family of SoCs.
Each PRU-ICSS instance is represented by a pruss node and other child
nodes. The nodes are added under the interconnect target module node in
the common am4372 dtsi file. The PRU-ICSS instances are supported only
on AM4376+ SoCs though in the AM437x family, so the interconnect target
module node should be disabled in any derivative board dts file that
uses AM4372 SoCs.
The PRU-ICSS1 on AM437x is very similar to the PRUSS in AM33xx, except
for variations in the RAM sizes, bus addresses and the number of
interrupts coming into the MPU INTC (host interrupt 5 is routed to
the other PRUSS instead of MPU).
The PRUSS subsystem node contains the entire address space. The various
sub-modules of the PRU-ICSS are represented as individual child nodes
(so platform devices themselves) of the PRUSS subsystem node. These
include the two PRU cores and the interrupt controller. All the Data
RAMs are represented within a child node of its own named 'memories'
without any compatible. The Real Time Media Independent Interface
controller (MII_RT), and the CFG sub-module are represented as syscon
nodes. The PRUSS CFG module has a clock mux for IEP clock, this clk
node is added under the CFG child node 'clocks'. The default source
for this mux clock is the PRU_ICSS_IEP_GCLK clock.
The DT nodes use all standard properties. The regs property in the PRU
nodes define the addresses for the Instruction RAM, the Debug and Control
sub-modules for that PRU core. The firmware for each PRU core is defined
through a 'firmware-name' property.
The default names for the firmware images for each PRU core are defined
as follows (these can be adjusted either in derivative board dts files
or through sysfs at runtime if required):
PRU-ICSS1 PRU0 Core: am437x-pru1_0-fw
PRU-ICSS1 PRU1 Core: am437x-pru1_1-fw
Note:
1. There are few more sub-modules like the Industrial Ethernet Peripheral
(IEP), MDIO, UART, eCAP that do not have bindings and so will be added
in the future.
2. The PRUSS INTC on AM437x SoCs also connect the host interrupt 0 to ADC0
and ADC1; 6 and 7 as possible DMA events, so use the 'ti,irqs-reserved'
property in derivative board dts files _if_ any of them should not be
handled by the host OS. Host interrupt 5 is already marked reserved as
it is connected to the other PRUSS instance.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PRU-ICSS target module node was left in disabled state in the
base am33xx-l4.dtsi file. PRU-ICSS is supported on the AM335x ICEv2
board, so enable this node to support PRUSS on this board. The PRUSS
node and most of its child nodes are already enabled in the base dts
file, and so become effective automatically with the enabling of
this PRU-ICSS target module node.
The corresponding PRU nodes can be disabled later on if there are
no use-cases defined to use a particular PRU core or the whole
PRU-ICSS subsystem itself if both its PRU cores are unused.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PRU-ICSS target module node was left in disabled state in the
base am33xx-l4.dtsi file. PRU-ICSS is supported on the AM335x SK
EVM board, so enable this node to support PRUSS on this board. The
PRUSS node and most of its child nodes are already enabled in the
base dts file, and so become effective automatically with the
enabling of this PRU-ICSS target module node.
The corresponding PRU nodes can be disabled later on if there are
no use-cases defined to use a particular PRU core or the whole
PRU-ICSS subsystem itself if both its PRU cores are unused.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PRU-ICSS target module node was left in disabled state in the
base am33xx-l4.dtsi file. PRU-ICSS is supported on the AM335x EVM,
so enable this node on the AM335x EVM. The PRUSS node and most of
its child nodes are already enabled in the base dts file, and so
become effective automatically with the enabling of this PRU-ICSS
target module node.
The corresponding PRU nodes can be disabled later on if there are
no use-cases defined to use a particular PRU core or the whole
PRU-ICSS subsystem itself if both its PRU cores are unused.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PRU-ICSS target module node was left in disabled state in the base
am33xx-l4.dtsi file. Enable this node on all the AM335x beaglebone
boards as they mostly use a AM3358 or a AM3359 SoC which do contain
the PRU-ICSS IP. The PRUSS node and most of its child nodes are already
enabled in the base dts file, and so become effective automatically
with the enabling of this PRU-ICSS target-module node.
The corresponding PRU nodes can be disabled later on if there are
no use-cases defined to use a particular PRU core or the whole
PRU-ICSS subsystem itself if both its PRU cores are unused.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PRUSS on AM335x SoCs has a MDIO sub-module that can be used
to control external PHYs associated with the Industrial Ethernet
peripherals within the PRUSS. The MDIO module used within the
PRU-ICSS is an instance of the MDIO Controller used in TI Davinci
SoCs. The same bus frequency of 1 MHz is chosen as the regular
MDIO node.
The node is added to the common am33xx-l4.dtsi file and is disabled.
This needs to be enabled in the respective board files using the
relevant AM335x SoCs supporting PRUSS and where the ethernet is
pinned out and connected properly.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the DT nodes for the PRU-ICSS on AM33xx family of SoCs. The AM33xx
SoCs contain a single PRU-ICSS instance and is represented by a pruss
node and other child nodes. PRU-ICSS is supported only on AM3356+ SoCs
though in the AM33xx family, so the nodes are added under the
corresponding disabled interconnect target module node in the common
am33xx-l4 dtsi file. The target module node should be enabled in only
those derivative board files that use a SoC containing PRU-ICSS.
The PRUSS subsystem node contains the entire address space. The various
sub-modules of the PRU-ICSS are represented as individual child nodes
(so platform devices themselves) of the PRUSS subsystem node. These
include the two PRU cores and the interrupt controller. All the Data
RAMs are represented within a child node of its own named 'memories'
without any compatible. The Real Time Media Independent Interface
controller (MII_RT), and the CFG sub-module are represented as syscon
nodes. The PRUSS CFG module has a clock mux for IEP clock, this clk
node is added under the CFG child node 'clocks'. The default source
for this mux clock is the PRU_ICSS_IEP_GCLK clock.
The DT nodes use all standard properties. The regs property in the PRU
nodes define the addresses for the Instruction RAM, the Debug and Control
sub-modules for that PRU core. The firmware for each PRU core is defined
through a 'firmware-name' property.
The default names for the firmware images for each PRU core are defined
as follows (these can be adjusted either in derivative board dts files
or through sysfs at runtime if required):
PRU-ICSS PRU0 Core: am335x-pru1_0-fw
PRU-ICSS PRU1 Core: am335x-pru1_1-fw
Note:
1. There are few more sub-modules like the Industrial Ethernet Peripheral
(IEP), MDIO, UART, eCAP that do not have bindings and so will be added
in the future.
2. The PRUSS INTC on AM335x SoCs also connect the host interrupts 0 to
TSC_ADC; 6 and 7 as possible DMA events, so use the 'ti,irqs-reserved'
property in derivative board dts files _if_ any of them should not be
handled by the host OS.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Remove ngpios property from sgpio node as it should be defined in the
platform dts.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210712100317.23298-5-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Switches support for the Draak and Ebisu development boards,
- I2C support on RZ/G2L,
- I2C EEPROM support on the Ebisu development board,
- Sound support for the R-Car D3 SoC and the Draak development board,
- Support for the new R-Car H3e-2G and M3e-2G SoCs on the Salvator-XS
and ULCB development boards,
- IOMMU support for DMAC, EtherAVB, and SDHI on the R-Car M3-W+ SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYQP5swAKCRCKwlD9ZEnx
cM9LAPoDlEbU8ZrWeJIg627jDFrlXoV349RvxDddpPkI61fftQEAp4HiOe2hvCUW
AlTISLtTnjgJkqx26eIhByQuAtcqRgs=
=AMJC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmEH8coACgkQmmx57+YA
GNlO4RAAod5A4vHAT1GmTL07BRt2srNDf7i2U6Jw+DqvXYs+M8JOQ7P9ZCHoFNCM
SXOqTbfriLrQ1gVTVcq9fP/Z7/eCRz8a4MBqQaZjfgtsBvd3PQAkrviY+mesZZpA
oVATEu22ilyE5YTnMOiYjFCX8aCc4wEeAKaxnjA1V4pdwuEOpxrSUH59o3Jx3tLZ
bwixhjX3yBbDexr0CZb+1qwQSsb15hCNKMIJSI16RHMpYwezegjKXzXfa9y6TUzZ
omE+llDoF5z+ubDhQvmKFckGf4WPnaWJ2tLrIY7Whbj1PfD0EM57FTfJtmbrnkKw
MAVCXfZFl6ULmDGcIqL0s1bn51B/GvZJYW7fbxDDGYQcuAgA0emwsfFrO5HWZ3uv
a/htVS8JoU8Wxxa6Rd1/NAniolq1S4s+X2Fzm6JKhdpf2UBZ+Kj2+ltZeYrmoBNY
/R0GiRdF8KU6ViIUwYfJMdzRj2T4ibqojuA8s1Wd09dZxeRc6hAZuyqZiYunLMY0
yKdVDZT72t433pAtAcxQH0wOSuylL5ahcBvcDnL22/egKuvr2fIRG61YqU/L7hl/
JHMWUf3P4tP4oWYPIeSZWGm3AwUU/G/POMF1MoKwztUXZClo7KeelAWT7Lqtt0XC
jMguRQyBDveuV4vf1rOgQlOYBNrPF/0zEhFBmmC0RJRAmvW+A3Q=
=T8YY
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.15
- Switches support for the Draak and Ebisu development boards,
- I2C support on RZ/G2L,
- I2C EEPROM support on the Ebisu development board,
- Sound support for the R-Car D3 SoC and the Draak development board,
- Support for the new R-Car H3e-2G and M3e-2G SoCs on the Salvator-XS
and ULCB development boards,
- IOMMU support for DMAC, EtherAVB, and SDHI on the R-Car M3-W+ SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: r8a77961: Add iommus to ipmmu_ds[01] related nodes
arm64: dts: renesas: Add support for M3ULCB+Kingfisher with R-Car M3e-2G
arm64: dts: renesas: Add support for M3ULCB with R-Car M3e-2G
arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G
arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3e-2G
arm64: dts: renesas: Add support for H3ULCB with R-Car H3e-2G
arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G
arm64: dts: renesas: Add Renesas R8A779M3 SoC support
arm64: dts: renesas: Add Renesas R8A779M1 SoC support
arm64: dts: renesas: hihope-rzg2-ex: Add EtherAVB internal rx delay
arm64: dts: renesas: r8a77995: draak: Add R-Car Sound support
arm64: dts: renesas: r8a77995: Add R-Car Sound support
arm64: dts: renesas: rcar-gen3: Add SoC model to comment headers
arm64: dts: renesas: r8a77990: ebisu: Add I2C EEPROM for PMIC
arm64: dts: renesas: r8a77995: draak: Remove bogus adv7511w properties
arm64: dts: renesas: beacon: Enable micbias
arm64: dts: renesas: r9a07g044: Add I2C nodes
arm64: dts: renesas: r8a779a0: Restore sort order
arm64: dts: renesas: r8a77990: ebisu: Add SW4 support
arm64: dts: renesas: r8a77995: draak: Add SW56 support
...
Link: https://lore.kernel.org/r/cover.1627650696.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of fixes on MMDC driver to add missing iounmap() and
clk_disable_unprepare(), and a follow-up fix.
- Fix missing-prototypes warning in SRC driver.
- Revert commit 7d981405d0 ("soc: imx8m: change to use platform
driver"), which breaks i.MX8M system that has CAAM driver enabled.
- One fix on imx53-m53menlo pinctrl configuration.
- Increase the PHY reset duration for imx6qdl-sr-som to fix intermittent
issues where the PHY would be unresponsive every once in a while.
- Add missing flag for in-band signalling between PHY and MAC on
kontron-sl28-var2 board to fix network support.
- Limit the SDIO Clock on Colibri iMX6ULL to 25MHz for fixing wireless
noise issue.
- Fix sysclk node name for LS1028A so that U-Boot is able to update the
"clock-frequency" property.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmD+HlIUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6hLQf/eioNfOs4vSi6Kgjy3xSsB/6dmybK
0kTs9ReNYPBRC/VSMqogR1NpUSC9lnIqBc7LqlyearNdcdbM4OPiiei883vGsm/X
4pI5nc+INp1efSwkKJGaBiUMNjQ5XlNUyr9mR7jYjD0FOngFF/FXrE2vjH498Jk6
6v/I3blGMC6v/eRwAGP/54JdvVNT1VK9+IaGMQhm/cfKFk3dvCVmYaeboiATtR4L
Nfn3Q5FjyBQFw1vpDWf1r13ZFVfcvFENHhrqtYa/PzeRe3aJXRXweanfstVHi2W3
4uBD4wl8G5ll56Xkn4r0jSBkyxQAis/AbTLIJDeDoPhmSI4F9xxWqP+MCg==
=MJbS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=W2Y5
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.14:
- A couple of fixes on MMDC driver to add missing iounmap() and
clk_disable_unprepare(), and a follow-up fix.
- Fix missing-prototypes warning in SRC driver.
- Revert commit 7d981405d0 ("soc: imx8m: change to use platform
driver"), which breaks i.MX8M system that has CAAM driver enabled.
- One fix on imx53-m53menlo pinctrl configuration.
- Increase the PHY reset duration for imx6qdl-sr-som to fix intermittent
issues where the PHY would be unresponsive every once in a while.
- Add missing flag for in-band signalling between PHY and MAC on
kontron-sl28-var2 board to fix network support.
- Limit the SDIO Clock on Colibri iMX6ULL to 25MHz for fixing wireless
noise issue.
- Fix sysclk node name for LS1028A so that U-Boot is able to update the
"clock-frequency" property.
* tag 'imx-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
arm64: dts: ls1028: sl28: fix networking for variant 2
Revert "soc: imx8m: change to use platform driver"
ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms
ARM: imx: common: Move prototype outside the SMP block
ARM: imx: add missing clk_disable_unprepare()
ARM: imx: add missing iounmap()
arm64: dts: ls1028a: fix node name for the sysclk
Link: https://lore.kernel.org/r/20210726023221.GF5901@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When this driver is disabled, the board file fails to build,
so add a dependency:
arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_preinit':
arch/arm/mach-ixp4xx/goramo_mlr.c:472:9: error: implicit declaration of function 'ixp4xx_pci_preinit'; did you mean 'iop3xx_pci_preinit'? [-Werror=implicit-function-declaration]
472 | ixp4xx_pci_preinit();
| ^~~~~~~~~~~~~~~~~~
| iop3xx_pci_preinit
arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_postinit':
arch/arm/mach-ixp4xx/goramo_mlr.c:481:22: error: implicit declaration of function 'ixp4xx_pci_read' [-Werror=implicit-function-declaration]
481 | if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
| ^~~~~~~~~~~~~~~
arch/arm/mach-ixp4xx/goramo_mlr.c:231:35: error: 'IXP4XX_UART1_BASE_PHYS' undeclared here (not in a function)
231 | .start = IXP4XX_UART1_BASE_PHYS,
| ^~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_init':
arch/arm/mach-ixp4xx/goramo_mlr.c:376:9: error: implicit declaration of function 'ixp4xx_sys_init' [-Werror=implicit-function-declaration]
376 | ixp4xx_sys_init();
| ^~~~~~~~~~~~~~~
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: soc@kernel.org
Link: https://lore.kernel.org/r/20210721151620.2373500-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:
arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml:
intc@10140000: $nodename:0: 'intc@10140000' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@..
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210617210825.3064367-2-sudeep.holla@arm.com
Link: https://lore.kernel.org/r/20210626000103.830184-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The operating points should correspond to the actual frequencies
supported for the CPU. Other patches have fixed so these are
rounded and reported properly, this fixes the device trees to
match.
The Codina variant has a lower frequency than other devices so
indicate this in the device tree.
Cc: phone-devel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
and netfilter trees.
Current release - regressions:
- mac80211: fix starting aggregation sessions on mesh interfaces
Current release - new code bugs:
- sctp: send pmtu probe only if packet loss in Search Complete state
- bnxt_en: add missing periodic PHC overflow check
- devlink: fix phys_port_name of virtual port and merge error
- hns3: change the method of obtaining default ptp cycle
- can: mcba_usb_start(): add missing urb->transfer_dma initialization
Previous releases - regressions:
- set true network header for ECN decapsulation
- mlx5e: RX, avoid possible data corruption w/ relaxed ordering and LRO
- phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811 PHY
- sctp: fix return value check in __sctp_rcv_asconf_lookup
Previous releases - always broken:
- bpf:
- more spectre corner case fixes, introduce a BPF nospec
instruction for mitigating Spectre v4
- fix OOB read when printing XDP link fdinfo
- sockmap: fix cleanup related races
- mac80211: fix enabling 4-address mode on a sta vif after assoc
- can:
- raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
- j1939: j1939_session_deactivate(): clarify lifetime of
session object, avoid UAF
- fix number of identical memory leaks in USB drivers
- tipc:
- do not blindly write skb_shinfo frags when doing decryption
- fix sleeping in tipc accept routine
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sKPI
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
(mac80211) and netfilter trees.
Current release - regressions:
- mac80211: fix starting aggregation sessions on mesh interfaces
Current release - new code bugs:
- sctp: send pmtu probe only if packet loss in Search Complete state
- bnxt_en: add missing periodic PHC overflow check
- devlink: fix phys_port_name of virtual port and merge error
- hns3: change the method of obtaining default ptp cycle
- can: mcba_usb_start(): add missing urb->transfer_dma initialization
Previous releases - regressions:
- set true network header for ECN decapsulation
- mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
LRO
- phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
PHY
- sctp: fix return value check in __sctp_rcv_asconf_lookup
Previous releases - always broken:
- bpf:
- more spectre corner case fixes, introduce a BPF nospec
instruction for mitigating Spectre v4
- fix OOB read when printing XDP link fdinfo
- sockmap: fix cleanup related races
- mac80211: fix enabling 4-address mode on a sta vif after assoc
- can:
- raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
- j1939: j1939_session_deactivate(): clarify lifetime of session
object, avoid UAF
- fix number of identical memory leaks in USB drivers
- tipc:
- do not blindly write skb_shinfo frags when doing decryption
- fix sleeping in tipc accept routine"
* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
gve: Update MAINTAINERS list
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
can: mcba_usb_start(): add missing urb->transfer_dma initialization
can: hi311x: fix a signedness bug in hi3110_cmd()
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
bpf: Fix leakage due to insufficient speculative store bypass mitigation
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
sis900: Fix missing pci_disable_device() in probe and remove
net: let flow have same hash in two directions
nfc: nfcsim: fix use after free during module unload
tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
sctp: fix return value check in __sctp_rcv_asconf_lookup
nfc: s3fwrn5: fix undefined parameter values in dev_err()
net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
net/mlx5: Unload device upon firmware fatal error
net/mlx5e: Fix page allocation failure for ptp-RQ over SF
net/mlx5e: Fix page allocation failure for trap-RQ over SF
...
-----BEGIN PGP SIGNATURE-----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=m5TP
-----END PGP SIGNATURE-----
Merge tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block
Pull libata fixlets from Jens Axboe:
- A fix for PIO highmem (Christoph)
- Kill HAVE_IDE as it's now unused (Lukas)
* tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
arch: Kconfig: clean up obsolete use of HAVE_IDE
libata: fix ata_pio_sector for CONFIG_HIGHMEM
The arch-specific Kconfig files use HAVE_IDE to indicate if IDE is
supported.
As IDE support and the HAVE_IDE config vanishes with commit b7fb14d3ac
("ide: remove the legacy ide driver"), there is no need to mention
HAVE_IDE in all those arch-specific Kconfig files.
The issue was identified with ./scripts/checkkconfigsymbols.py.
Fixes: b7fb14d3ac ("ide: remove the legacy ide driver")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210728182115.4401-1-lukas.bulwahn@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Swap reg and reg-names order and drop adi,input-justification
and adi,input-style to fix the following dtbs_check warnings:
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: adi,input-justification: False schema does not allow ['evenly']
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: adi,input-style: False schema does not allow [[1]]
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: reg-names:1: 'edid' was expected
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: reg-names:2: 'cec' was expected
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix the following dtbs_check warning:
cs42l51@4a: port:endpoint@0:frame-master: True is not of type 'array'
cs42l51@4a: port:endpoint@0:bitclock-master: True is not of type 'array'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
To support the detach feature, add a new mailbox channel to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
To support the detach feature, add a new mailbox channel to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The port is unused, but shares the same supply with port0, so fill the
DT property in. This fixes the following dtbs_check warning:
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: usbphyc@5a006000: usb-phy@1: 'phy-supply' is a required property
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix the following dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: display-bl: 'power-supply' is a required property
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: panel: 'power-supply' is a required property
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix the following dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: codec@a: port:endpoint@0:frame-master: True is not of type 'array'
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: codec@a: port:endpoint@0:bitclock-master: True is not of type 'array'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
While 7e5f3155dc ("ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2")
fixed the LED0 assignment on the PDK2 board, the same commit did not
update the touchscreen IRQ line assignment, which is the same GPIO line,
shared between the LED0 output and touchscreen IRQ input. To make this
more convoluted, the same EXTI input (not the same GPIO line) is shared
between Button B which is Active-Low IRQ, and touchscreen IRQ which is
Edge-Falling IRQ, which cannot be used at the same time. In case the LCD
board with touchscreen is in use, which is the case here, LED0 must be
disabled, Button B must be polled, so the touchscreen interrupt works as
it should.
Update the touchscreen IRQ line assignment, disable LED0 and use polled
GPIO button driver for Button B, since the DT here describes baseboard
with LCD board.
Fixes: 7e5f3155dc ("ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The LAN8710 Energy Detect Power Down (EDPD) functionality might cause
unreliable cable detection. There are multiple accounts of this in the
SMSC PHY driver patches which attempted to make EDPD reliable, however
it seems there is always some sort of corner case left. Unfortunatelly,
there is no errata documented which would confirm this to be a silicon
bug on the LAN87xx series of PHYs (LAN8700, LAN8710, LAN8720 at least).
Disable EDPD on the DHCOM SoM, just like multiple other boards already
do as well, to make the cable detection reliable.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The DHCOM SoM has two RTC, one is the STM32 RTC built into the SoC
and another is Microcrystal RV RTC. By default, only the later has
battery backup, the former does not. The order in which the RTCs
are probed on boot is random, which means the kernel might pick up
system time from the STM32 RTC which has no battery backup. This
then leads to incorrect initial system time setup, even though the
HW RTC has correct time configured in it.
Add DT alias entries, so that the RTCs get assigned fixed IDs and
the HW RTC is always picked by the kernel as the default RTC, thus
resulting in correct system time in early userspace.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This adds a basic device tree for the Samsung SGH-I407
mobile phone also known as Kyle.
Cc: newbyte@disroot.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a devicetree for Samsung GT-I8160 also known as Codina.
Cc: newbyte@disroot.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
At the moment the AB8500 USB PHY driver still uses the old USB PHY
subsystem instead of the generic PHY subsystem. This means that there
is no explicit link between the USB controller and the USB PHY.
In U-Boot the PHY driver is integrated in the generic PHY subsystem,
so we need to use the typical PHY device tree bindings to specify
which PHY belongs to the USB controller.
Add the link between USB controller and PHY to both ste-ab8500.dtsi
and ste-ab8505.dtsi. This is mainly for U-Boot for now and will just
be ignored in Linux. However, if the AB8500 USB PHY driver in Linux
is moved to the generic PHY subsystem at some point these device tree
changes can be used as well.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We use the no-sdio and no-sd flags to indicate that these eMMCs
are neither, so that the operating system can skip trying to
identify them as SDIO or SD during boot, which just takes time.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Most architectures do not need a custom implementation, and in most
cases the generic implementation is preferred, so change the polariy
on these Kconfig symbols to require architectures to select them when
they provide their own version.
The new name is CONFIG_ARCH_HAS_{STRNCPY_FROM,STRNLEN}_USER.
The remaining architectures at the moment are: ia64, mips, parisc,
um and xtensa. We should probably convert these as well, but
I was not sure how far to take this series. Thomas Bogendoerfer
had some concerns about converting mips but may still do some
more detailed measurements to see which version is better.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We can now switch over to using cpu_pm instead of custom calls and make
the context save and restore functions static.
Let's also move the save and restore functions to avoid adding forward
declarations for them. And get rid of the static data pointer while at it.
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210727101034.32148-2-tony@atomide.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-29
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 14 day(s) which contain
a total of 20 files changed, 446 insertions(+), 138 deletions(-).
The main changes are:
1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer.
2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann,
Piotr Krysiuk and Benedict Schlueter.
3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of JITs, each of the JIT backends compiles the BPF nospec instruction
/either/ to a machine instruction which emits a speculation barrier /or/ to
/no/ machine instruction in case the underlying architecture is not affected
by Speculative Store Bypass or has different mitigations in place already.
This covers both x86 and (implicitly) arm64: In case of x86, we use 'lfence'
instruction for mitigation. In case of arm64, we rely on the firmware mitigation
as controlled via the ssbd kernel parameter. Whenever the mitigation is enabled,
it works for all of the kernel code with no need to provide any additional
instructions here (hence only comment in arm64 JIT). Other archs can follow
as needed. The BPF nospec instruction is specifically targeting Spectre v4
since i) we don't use a serialization barrier for the Spectre v1 case, and
ii) mitigation instructions for v1 and v4 might be different on some archs.
The BPF nospec is required for a future commit, where the BPF verifier does
annotate intermediate BPF programs with speculation barriers.
Co-developed-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Benedict Schlueter <benedict.schlueter@rub.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
The GPIO is used to place the BMC-connected TPM in reset.
The net is called BMC_TPM_RST_N on Tacoma.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210727033319.473152-3-joel@jms.id.au
The GPIO is used to place the BMC-connected TPM in reset. This state is
latched until the BMC is next reset, blocking access to the TPM for that
boot.
On both machines this net is called TPM_RESET_LATCH_B.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210727033319.473152-2-joel@jms.id.au
Having a button code and not a key code causes issues with libinput.
udev won't set ID_INPUT_KEY. If it is forced, then it causes a bug
within libinput.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210727091351.44475-1-nicolas.ferre@microchip.com
Add pinctrl-names and pinctrl-0 properties on controllers that claims to
use pins to avoid failures due to
commit 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
and also to avoid using pins that may be claimed my other IPs.
Fixes: b7c2b61570 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Fixes: 1e5f532c27 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 38153a0178 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210727074006.1609989-1-claudiu.beznea@microchip.com
Cc: <stable@vger.kernel.org> # v5.7+
This adds support for the Sancloud BBE Lite which shares a common
hardware base with the non-Lite version of the BBE.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Sancloud BBE, BBE Lite and BBE Extended+WiFi share a common hardware
base so we can avoid duplication via a dtsi file.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move the HDMI hardware configuration for the BeagleBone Black out of the
boneblack common dtsi file and into its own separate dtsi file. This
allows the devicetree for BeagleBone Black derivatives which lack the
hdmi encoding hardware to include the common dtsi file without needing
to duplicate configuration or override the status of all hdmi-related
nodes.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the ADC for AN pins on Mikrobus1 and Mikrobus2 on the board.
These correspond to channels AD6 and AD7 in the controller.
# cat /sys/bus/iio/devices/iio\:device0/in_voltage6_raw
240
# cat /sys/bus/iio/devices/iio\:device0/in_voltage7_raw
16380
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210622101742.14535-1-eugen.hristev@microchip.com
OMAP4 has a single McASP instance with single serializer and locked for DIT
mode.
To be able to enable the support the following fixes needed:
- Add the DAT port ranges to the target module's ranges
We can already fill in the op-mode and serial-dir for McASP as it only
supports this configuration, but keep the module disabled as there is no
known device available where it is used.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
McASP only supports Force-idle, No-idle and Smart-idle modes
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
dra762 abz package is pin compatible with dra742 and few peripherals
like DDR with upgraded speed. Add dt support for this SoC.
Reported-by: Praneeth Bajjuri <praneeth@ti.com>
Tested-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[khilman: forward port from ti-linux-5.4.y]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds gpio-line-names to the BeagleBone Blue DTS. The line names
are based on the BeagleBone Blue rev A2 schematic.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The MACH_OMAP3517EVM was added back in commit 549f95ed20 due to
being used by the ASoC driver, but this driver was dropped in
commit 2c2596f3ab as the audio for this board had been moved to
a simple-audio-card configuration so MACH_OMAP3517EVM is now
properly unuused and can be dropped.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This device tree include file describes a fixed-regulator
connecting smps7_reg output (1.8V) to some 1.8V rail and
consumers (vdds_1v8_main).
This regulator does not physically exist.
I assume it was introduced as a wrapper around smps7_reg
to provide a speaking signal name "vdds_1v8_main" as label.
This fixed-regulator without real function was not an issue
in driver code until
Commit 98e48cd928 ("regulator: core: resolve supply for boot-on/always-on regulators")
introduced a new check for regulator initialization which
makes Palmas regulator registration fail:
[ 5.407712] ldo1: supplied by vsys_cobra
[ 5.412748] ldo2: supplied by vsys_cobra
[ 5.417603] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
The reason is that the supply-chain of regulators is too
long and goes from ldo3 through the virtual vdds_1v8_main
regulator and then back to smps7. This adds a cross-dependency
of probing Palmas regulators and the fixed-regulator which
leads to probe deferral by the new check and is no longer
resolved.
Since we do not control what device tree files including this
one reference (either &vdds_1v8_main or &smps7_reg or both)
we keep both labels for smps7 for compatibility.
Fixes: 98e48cd928 ("regulator: core: resolve supply for boot-on/always-on regulators")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Based on the latest timing specifications for the TPS65218 from the data
sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206
from November 2014, we must change the i2c bus speed to better fit within
the minimum high SCL time required for proper i2c transfer.
When running at 400khz, measurements show that SCL spends
0.8125 uS/1.666 uS high/low which violates the requirement for minimum
high period of SCL provided in datasheet Table 7.6 which is 1 uS.
Switching to 100khz gives us 5 uS/5 uS high/low which both fall above
the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low.
Without this patch occasionally a voltage set operation from the kernel
will appear to have worked but the actual voltage reflected on the PMIC
will not have updated, causing problems especially with cpufreq that may
update to a higher OPP without actually raising the voltage on DCDC2,
leading to a hang.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
omap_hwmod_get_pwrdm() may access a NULL clk_hw pointer in some failure
cases. Add a check for the case and bail out gracely if this happens.
Reported-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
All NMI contexts are handled the same as the safe context: store the
message and defer printing. There is no need to have special NMI
context tracking for this. Using in_nmi() is enough.
There are several parts of the kernel that are manually calling into
the printk NMI context tracking in order to cause general printk
deferred printing:
arch/arm/kernel/smp.c
arch/powerpc/kexec/crash.c
kernel/trace/trace.c
For arm/kernel/smp.c and powerpc/kexec/crash.c, provide a new
function pair printk_deferred_enter/exit that explicitly achieves the
same objective.
For ftrace, remove the printk context manipulation completely. It was
added in commit 03fc7f9c99 ("printk/nmi: Prevent deadlock when
accessing the main log buffer in NMI"). The purpose was to enforce
storing messages directly into the ring buffer even in NMI context.
It really should have only modified the behavior in NMI context.
There is no need for a special behavior any longer. All messages are
always stored directly now. The console deferring is handled
transparently in vprintk().
Signed-off-by: John Ogness <john.ogness@linutronix.de>
[pmladek@suse.com: Remove special handling in ftrace.c completely.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-5-john.ogness@linutronix.de
After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply
instead of dummy regulator.
[ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[ 7.117184] VCCK: supplied by regulator-dummy
[ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[ 7.118498] VDDEE: will resolve supply early: pwm
[ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[ 7.118553] VDDEE: supplied by regulator-dummy
[ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT
Fixes: 087a1d8b4e ("ARM: dts: meson8b: ec100: add the VDDEE regulator")
Fixes: 3e7db1c1b7 ("ARM: dts: meson8b: ec100: improve the description of the regulators")
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210705112358.3554-4-linux.amoon@gmail.com
After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply
instead of dummy regulator.
Add missing pwm-supply for regulator-vcck regulator node.
[ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[ 7.117184] VCCK: supplied by regulator-dummy
[ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[ 7.118498] VDDEE: will resolve supply early: pwm
[ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[ 7.118553] VDDEE: supplied by regulator-dummy
[ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT
Fixes: dee51cd0d2 ("ARM: dts: meson8b: mxq: add the VDDEE regulator")
Fixes: d94f60e3df ("ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805")
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210705112358.3554-3-linux.amoon@gmail.com
After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs.
Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply
instead of dummy regulator.
[ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[ 7.117184] VCCK: supplied by regulator-dummy
[ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[ 7.118498] VDDEE: will resolve supply early: pwm
[ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[ 7.118553] VDDEE: supplied by regulator-dummy
[ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT
Fixes: 524d96083b ("ARM: dts: meson8b: odroidc1: add the CPU voltage regulator")
Fixes: 8bdf38be71 ("ARM: dts: meson8b: odroidc1: add the VDDEE regulator")
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed typo in commit s/observer/observe/]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210705112358.3554-2-linux.amoon@gmail.com
Dmitry Osipenko