The cardlist section is important for some boards, because they
may require extra modprobe parameters.
Improve the docs to mention that.
Thanks-to: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for providing me some PCI IDs
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Several of the existing documents under the media admin-guide
contain build procedures.
Add an specific chapter describing it. This document was
partially inspired on the modifications I made to the bttv.rst
file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The media's admin guide is currently just a group of
not-connected docs.
Add an introduction chapter for it to start making sense
to a random reader.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It is interesting to have a card list also for cx231xx
driver, as it currently supports 27 different boards.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Improve the documentation by providing examples on how to test camera
capture on imx6q-sabresd via v4l2-ctl and Gstreamer.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam<slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to improve the documentation, provide the OV5640 MIPI module
part number that is used on the imx6q-sabresd board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current example for imx6q-sabresd is for a direct conversion pipeline.
Provide an extra example using unprocessed video capture for completeness.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current instructions for imx6q-sabresd do not lead to functional
capture on OV5640 MIPI CSI-2.
The reason for this, as explained by Steve Longerbeam, is that OV5640 by
default transmits on virtual channel 0, not channel 1 as is given in the
instructions.
Adapt the instructions to use virtual channel 0 so that a working
camera setup can be achieved on imx6q-sabresd.
Also, since we are using an IC direct conversion pipeline, improve
the example by demonstrating colorspace and scaling.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam<slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to make easier for people to navigate between the
three media guides, add cross-references between them
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The copyright info is not the most valuable information
there. Move them to the end.
While here, change the copyright to cover up to this
year (2020).
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file is very old, and doesn't match the current udev
behavior.
I wanted to preserve it, because we'll need some udev
description some day about how to keep names unique,
but there's nothing here to help with that...
So, be it: let's just discard this document, as it doesn't
provide anything useful anymore.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There aren't much to be done here... almost everything is
still valid. The supported boards even reflect the current
driver's state. Yet, some things changed, so let's keep
this document updated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several things here that are outdated, because this
document was written a long time ago.
Update them to reflect the current status of the driver and
the media subsystem.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file contains lots of obsoleted information. Update it
to reflect the current status and tools used by Digital TV
users and add pointers to the current locations and to
LinuxTV wiki pages.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Do some cleanups at the document in order to mark two
literal blocks as such.
While here, simplify two block markups, using the less
verbose option (::).
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There aren't many boards supported by this driver. So, add
a list for it manually generated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This document is... old. The bttv driver was one of the first
drivers at the Kernel. So, the document became a little obsoleted.
Update it to reflect some changes that happened along the time
affecting this driver and the subsystem.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This document is very outdated, and doesn't match the
upstream current way.
Update it, making some parts a little bit more generic.
While the main focus of this document is digital TV
cards, its content also may also help someone with just
analog TV support.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While this is old, now that we moved the intro part of it,
its contents seem to be valid, if we mention that we're
talking only about the BT878 support.
Update the document title accordingly and remove the obsolete
note from it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This document doesn't describe the DVB subsystem. Instead, it
just contain references to some places.
Better name it and improve its contents.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The content there is somewhat outdated. Update to reflect
the current status.
While here, remove extra spaces, as we won't be preserving
left margin alinment on this document.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Part of this document has nothing to do with the Avermedia
driver. It is generic to the entire subsystem. So, split it
on a separate file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There were some changes at the drivers adding support for
more cards. Update cardlists accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For ipu3 ImgU image processing, the frame data from TNR can feed into
DDR by Output Formatting System or feed into YUV downscaler to do YUV
downscaling for secondary output, which is usually used for display.
current ImgU image pipeline diagram misses the YUV downscaling,
this patch add it to aligh with actual hardware blocks.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch add yavta test command in ipu3.rst as an example on how to
run simple ImgU test using yavta.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the media graph topologies for the i.MX6Q SabreSD and SabreAuto.
This makes it easier to understand the topology and follow the
entity descriptions in the following sections.
Also clarify that the SabreSD and SabreLite media pipeline config examples
are for the i.MX6Q boards.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Most of the driver-specific documentation is meant to help
users of the media subsystem.
Move them to the admin-guide.
It should be noticed, however, that several of those files
are outdated and will require further work in order to make
them useful again.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab