initcall_debug shows that OHCI controllers take ~60ms to probe on
Rockchip RK3399 systems:
probe of fe3a0000.usb returned 1 after 58941 usecs
A few of these can add up to waste non-trivial amounts of time at boot.
These host controllers don't provide resources to other drivers, so
this shouldn't contribute to exposing race conditions.
Chrome OS kernels have carried this patch on some systems for a while
without issues. Similar patches have been merged for a variety of (e)MMC
host controllers for similar reasons.
[Brian: rewrote commit message, refreshed, but retained dtor's original
authorship ]
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220518150150.1.Ie8ea0e945a9c15066237014be219eed60066d493@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Running the driver through kasan gives an interesting splat:
BUG: KASAN: global-out-of-bounds in isp1760_register+0x180/0x70c
Read of size 20 at addr f1db2e64 by task swapper/0/1
(...)
isp1760_register from isp1760_plat_probe+0x1d8/0x220
(...)
This happens because the loop reading the regmap fields for the
different ISP1760 variants look like this:
for (i = 0; i < HC_FIELD_MAX; i++) { ... }
Meaning it expects the arrays to be at least HC_FIELD_MAX - 1 long.
However the arrays isp1760_hc_reg_fields[], isp1763_hc_reg_fields[],
isp1763_hc_volatile_ranges[] and isp1763_dc_volatile_ranges[] are
dynamically sized during compilation.
Fix this by putting an empty assignment to the [HC_FIELD_MAX]
and [DC_FIELD_MAX] array member at the end of each array.
This will make the array one member longer than it needs to be,
but avoids the risk of overwriting whatever is inside
[HC_FIELD_MAX - 1] and is simple and intuitive to read. Also
add comments explaining what is going on.
Fixes: 1da9e1c068 ("usb: isp1760: move to regmap for register access")
Cc: stable@vger.kernel.org
Cc: Rui Miguel Silva <rui.silva@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220516091424.391209-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The support for xHCI controllers with only one roothub, and the code
to defer primary roothub registation until second roothub got merged
to usb-next for 5.19 at the same time.
commit 873f323618 ("xhci: prepare for operation w/o shared hcd")
commit b7a4f9b5d0 ("xhci: Set HCD flag to defer primary roothub
registration")
These got merged in such a way that the flag to defer primary roothub
registration is set even for xHC controllers with just one roothub.
Fix this by setting the defer flag in a codepath taken only if we have
two roothubs
Fixes: 873f323618 ("xhci: prepare for operation w/o shared hcd")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220516094850.19788-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using a private macro for an invalid grant reference use
the common one.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
The extcon_get_extcon_dev() function returns error pointers on error,
NULL when it's a -EPROBE_DEFER defer situation, and ERR_PTR(-ENODEV)
when the CONFIG_EXTCON option is disabled. This is very complicated for
the callers to handle and a number of them had bugs that would lead to
an Oops.
In real life, there are two things which prevented crashes. First,
error pointers would only be returned if there was bug in the caller
where they passed a NULL "extcon_name" and none of them do that.
Second, only two out of the eight drivers will build when CONFIG_EXTCON
is disabled.
The normal way to write this would be to return -EPROBE_DEFER directly
when appropriate and return NULL when CONFIG_EXTCON is disabled. Then
the error handling is simple and just looks like:
dev->edev = extcon_get_extcon_dev(acpi_dev_name(adev));
if (IS_ERR(dev->edev))
return PTR_ERR(dev->edev);
For the two drivers which can build with CONFIG_EXTCON disabled, then
extcon_get_extcon_dev() will now return NULL which is not treated as an
error and the probe will continue successfully. Those two drivers are
"typec_fusb302" and "max8997-battery". In the original code, the
typec_fusb302 driver had an 800ms hang in tcpm_get_current_limit() but
now that function is a no-op. For the max8997-battery driver everything
should continue working as is.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Here are some new device ids.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYn31fQAKCRALxc3C7H1l
CKb9AQCj2VXCCMKXtOmKPs4p5KKUjIHHdHLxqz2gBb8XEdGDhAEApKZiHLDJh+77
bLsmDn6DN6gCqn9CppXRYjDM+W4L2wI=
=gxjM
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial
Johan writes:
USB-serial fixes for 5.18-rc7
Here are some new device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: qcserial: add support for Sierra Wireless EM7590
USB: serial: option: add Fibocom MA510 modem
USB: serial: option: add Fibocom L610 modem
USB: serial: pl2303: add device id for HP LM930 Display
The bandwidth budget table is introduced to trace ideal bandwidth used
by each INT/ISOC endpoint, but in fact the endpoint may consume more
bandwidth and cause data transfer error, so it's better to leave some
margin. Obviously it's difficult to find the best margin for all cases,
instead take use of the worst-case scenario.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220512064931.31670-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to the scheduler allocates the optimal bandwidth for FS ISOC endpoints,
this may be not enough actually and causes data transfer error, so come up
with an estimate that is no less than the worst case bandwidth used for
any one mframe, but may be an over-estimate.
Fixes: 451d391258 ("usb: xhci-mtk: update fs bus bandwidth by bw_budget_table")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220512064931.31670-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_gadget_register_driver can be called multi time by to
threads via USB_RAW_IOCTL_RUN ioctl syscall, which will lead
to multiple registrations.
Call trace:
driver_register+0x220/0x3a0 drivers/base/driver.c:171
usb_gadget_register_driver_owner+0xfb/0x1e0
drivers/usb/gadget/udc/core.c:1546
raw_ioctl_run drivers/usb/gadget/legacy/raw_gadget.c:513 [inline]
raw_ioctl+0x1883/0x2730 drivers/usb/gadget/legacy/raw_gadget.c:1220
ioctl USB_RAW_IOCTL_RUN
This routine allows two processes to register the same driver instance
via ioctl syscall. which lead to a race condition.
Please refer to the following scenarios.
T1 T2
------------------------------------------------------------------
usb_gadget_register_driver_owner
driver_register driver_register
driver_find driver_find
bus_add_driver bus_add_driver
priv alloced <context switch>
drv->p = priv;
<schedule out>
kobject_init_and_add // refcount = 1;
//couldn't find an available UDC or it's busy
<context switch>
priv alloced
drv->priv = priv;
kobject_init_and_add
---> refcount = 1 <------
// register success
<context switch>
===================== another ioctl/process ======================
driver_register
driver_find
k = kset_find_obj()
---> refcount = 2 <------
<context out>
driver_unregister
// drv->p become T2's priv
---> refcount = 1 <------
<context switch>
kobject_put(k)
---> refcount = 0 <------
return priv->driver;
--------UAF here----------
There will be UAF in this scenario.
We can fix it by adding a new STATE_DEV_REGISTERING device state to
avoid double register.
Reported-by: syzbot+dc7c3ca638e773db07f6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000e66c2805de55b15a@google.com/
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Schspa Shi <schspa@gmail.com>
Link: https://lore.kernel.org/r/20220508150247.38204-1-schspa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alder Lake N TCSS xHCI needs to be runtime suspended whenever possible
to allow the TCSS hardware block to enter D3 and thus save energy
Cc: stable@kernel.org
Suggested-by: Gopal Vamshi Krishna <vamshi.krishna.gopal@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220511220450.85367-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The XHCI_RESET_EP_QUIRK was added in 2009 to support prototype xHC
hardware from Fresco Logic that needed an additional configure endpoint
command after a reset endpoint.
That hardware should not have made it to the market.
Now, 13 years later its about time we get rid of it.
quirk was added in commit ac9d8fe7c6 ("USB: xhci: Add quirk for Fresco
Logic xHCI hardware.")
Print a debug message about the removed quirk if against all odds we run
into this controller.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220511220450.85367-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't enable U1 or U2 Link powermanagenet (LPM) states for USB3
devices connected to tier 2 or further hubs.
For unknown reasons we previously only prevented U1.
Be consistent, and prevent both U1/U2 states if tier policy doesn't
allow LPM.
Also check the tier policy a bit earlier, and return if U1/U2 is
not allowed. This avoids unnecessary xhci MEL commands.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220511220450.85367-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'stop endpoint' command timer was started when a 'stop endpoint'
command was added to the command queue.
This can trigger unwanted timeouts if there are several pending commands
in the queue that xHC needs to handle first.
The generic command timer, which was added later than the 'stop endpoint'
timeout timer, times each command currently being handled by xHC hardware.
A timed out stop endpoint command was treated as a more severe issue than
other failed commands, so the separate stop endpoint timer was left
unchanged.
Use the generic command timer for stop endpoint commands. Identify if
the timed out command was a stop endpoint command in the generic handler,
and treat it with the same severity as earlier.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220511220450.85367-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Activate the just added extension for xhci-plat and omit the shared
hcd if either of the root hubs has no ports.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220511220450.85367-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch prepares xhci-plat for the following scenario
- If either of the root hubs has no ports, then omit shared hcd
- Main hcd can be USB3 if there are no USB2 ports
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220511220450.85367-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is in preparation of an extension where in case of a
root hub with no ports no shared hcd will be created.
Whether one of the root hubs has no ports we figure our in
usb_add_hcd() for the primary hcd. Therefore create the shared hcd
only after this call.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220511220450.85367-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch prepares xhci for the following scenario:
- If either of the root hubs has no ports, then omit shared hcd
- Main hcd can be USB3 if there are no USB2 ports
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220511220450.85367-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factoring out parts of xhci_gen_setup() has two motivations:
- When adding functionaliy to omit shared hcd if not needed in a
subsequent patch, we'll have to call xhci_hcd_init_usb3_data()
from two places.
- It reduces size of xhci_gen_setup() and makes it better readable.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220511220450.85367-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer
registering primary roothub in usb_add_hcd() if xhci has two roothubs.
This will make sure both primary roothub and secondary roothub will be
registered along with the second HCD.
This is required for cold plugged USB devices to be detected in certain
PCIe USB cards (like Inateck USB card connected to AM64 EVM or J7200 EVM).
This patch has been added and reverted earier as it triggered a race
in usb device enumeration.
That race is now fixed in 5.16-rc3, and in stable back to 5.4
commit 6cca13de26 ("usb: hub: Fix locking issues with address0_mutex")
commit 6ae6dc22d2 ("usb: hub: Fix usb enumeration issue due to address0
race")
[minor rebase change, and commit message update -Mathias]
CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220510091630.16564-3-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been observed with certain PCIe USB cards (like Inateck connected
to AM64 EVM or J7200 EVM) that as soon as the primary roothub is
registered, port status change is handled even before xHC is running
leading to cold plug USB devices not detected. For such cases, registering
both the root hubs along with the second HCD is required. Add support for
deferring roothub registration in usb_add_hcd(), so that both primary and
secondary roothubs are registered along with the second HCD.
This patch has been added and reverted earier as it triggered a race
in usb device enumeration.
That race is now fixed in 5.16-rc3, and in stable back to 5.4
commit 6cca13de26 ("usb: hub: Fix locking issues with address0_mutex")
commit 6ae6dc22d2 ("usb: hub: Fix usb enumeration issue due to address0
race")
CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220510091630.16564-2-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch resolves kernel-doc warnings to add return value description
in function comments.
Addressed warnings:
drivers/usb/host/ehci-xilinx-of.c:37: warning: No description found for return value of 'ehci_xilinx_port_handed_over'
drivers/usb/host/ehci-xilinx-of.c:117: warning: No description found for return value of 'ehci_hcd_xilinx_of_probe'
drivers/usb/host/ehci-xilinx-of.c:201: warning: No description found for return value of 'ehci_hcd_xilinx_of_remove'
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Link: https://lore.kernel.org/r/20220509170252.28271-1-piyush.mehta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the unused variables assignment warning.
Value assigned to variable bufferspace is overwritten, before
it can be used. This makes such variable assignment useless.
Reported Coverity warning: UNUSED_VALUE
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Link: https://lore.kernel.org/r/20220506175349.10102-1-piyush.mehta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch resolves checkpatch warnings for xilinx EHCI driver.
Addressed warnings:
WARNING: quoted string split across lines
50: FILE: drivers/usb/host/ehci-xilinx-of.c:50:
+ "The USB host controller does not support full speed "
+ "nor low speed devices\n");
WARNING: quoted string split across lines
53: FILE: drivers/usb/host/ehci-xilinx-of.c:53:
+ "You can reconfigure the host controller to have "
+ "full speed support\n");
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Link: https://lore.kernel.org/r/20220510132252.26001-1-piyush.mehta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Putting USB gadgets on a new bus of their own encounters a problem
when multiple gadgets are present: They all have the same name! The
driver core fails with a "sys: cannot create duplicate filename" error
when creating any of the /sys/bus/gadget/devices/<gadget-name>
symbolic links after the first.
This patch fixes the problem by adding a ".N" suffix to each gadget's
name when the gadget is registered (where N is a unique ID number),
thus making the names distinct.
Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: fc274c1e99 ("USB: gadget: Add a new bus for gadgets")
Link: https://lore.kernel.org/r/YnqKAXKyp9Vq/pbn@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lubbock is the only machine that has three IRQs for the UDC.
These are currently hardcoded in the driver based on a
machine header file.
Change this to use platform device resources as we use for
the generic IRQ anyway.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
In this case the remove callback even returns early without stopping the
tcpm worker thread and various timers. A work scheduled on the work
queue, or a firing timer after tcpci_remove() returned probably results
in a use-after-free situation because the regmap and driver data were
freed. So better make sure that tcpci_unregister_port() is called even
if disabling the irq failed.
Also emit a more specific error message instead of the i2c core's
"remove failed (EIO), will be ignored" and return 0 to suppress the
core's warning.
This patch is (also) a preparation for making i2c remove callbacks
return void.
Fixes: 3ba76256fc ("usb: typec: tcpci: mask event interrupts when remove driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220502080456.21568-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cdc-wdm tracks whether a response reading request is in-progress and
blocks the next request from being sent until the previous request is
completed. As soon as last user closes the cdc-wdm device file, the
driver cancels any ongoing requests, resets the pending response
counter, but leaves the response reading in-progress flag
(WDM_RESPONDING) untouched.
So if the user closes the device file during the response receive
request is being performed, no more data will be obtained from the
modem. The request will be cancelled, effectively preventing the
WDM_RESPONDING flag from being reseted. Keeping the flag set will
prevent a new response receive request from being sent, permanently
blocking the read path. The read path will staying blocked until the
module will be reloaded or till the modem will be re-attached.
This stuck has been observed with a Huawei E3372 modem attached to an
OpenWrt router and using the comgt utility to set up a network
connection.
Fix this issue by clearing the WDM_RESPONDING flag on the device file
close.
Without this fix, the device reading stuck can be easily reproduced in a
few connection establishing attempts. With this fix, a load test for
modem connection re-establishing worked for several hours without any
issues.
Fixes: 922a5eadd5 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device")
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just like the header is tracking the formats in a linked list, in this
patch we track the frames in a linked list of the formats. It
simplifies the parsing of the configfs structure.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220421211427.3400834-6-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions and structs of the configfs interface should also be used
by the uvc gadget driver. This patch prepares the stack by moving the
common structs and functions to the common header file.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220421211427.3400834-5-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some configfs variables like bDefaultFrameIndex are always starting by
1. This patch adds a check to prevent setting those variables to 0.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220421211427.3400834-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the controller hasn't DMA'ed the Setup data from its fifo, it won't
process the End Transfer command. Polling for the command completion may
block the driver from servicing the Setup phase and cause a timeout.
Previously we only check and delay issuing End Transfer in the case of
endpoint dequeue. Let's do that for all End Transfer scenarios.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/2fcf3b5d90068d549589a57a27a79f76c6769b04.1650593829.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver shouldn't be able to issue End Transfer to the control
endpoint at anytime. Typically we should only do so in error cases such
as invalid/unexpected direction of Data Phase as described in the
control transfer flow of the programming guide. It _may_ end started
data phase during controller deinitialization from soft disconnect or
driver removal. However, that should not happen because the driver
should be maintained in EP0_SETUP_PHASE during driver tear-down. On
soft-connect, the controller should be reset from a soft-reset and there
should be no issue starting the control endpoint.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3c6643678863a26702e4115e9e19d7d94a30d49c.1650593829.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we can't guarantee that the host won't send new Setup packet
before going through the device-initiated disconnect, don't prepare
beyond the Setup stage and keep the device in EP0_SETUP_PHASE. This
ensures that the device-initated disconnect sequence can go through
gracefully. Note that the controller won't service the End Transfer
command if it can't DMA out the Setup packet.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/6bacec56ecabb2c6e49a09cedfcac281fdc97de0.1650593829.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the GEVNTCOUNT indicates events in the event buffer, the driver needs
to acknowledge them before the controller can halt. Simply let the
interrupt handler acknowledges the remaining event generated by the
controller while polling for DSTS.DEVCTLHLT. This avoids disabling irq
and taking care of race condition between the interrupt handlers and
pullup().
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ea306ec93c41ccafbdb5d16404ff3b6eca299613.1650593829.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't do soft-disconnect if it's previously done. Likewise, don't do
soft-connect if the device is currently connected and running. It would
break normal operation.
Currently the caller of pullup() (udc's sysfs soft_connect) only checks
if it had initiated disconnect to prevent repeating soft-disconnect. It
doesn't check for soft-connect. To be safe, let's keep the check here
regardless whether the udc core is fixed.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1c1345bd66c97a9d32f77d63aaadd04b7b037143.1650593829.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a USB GPIO based reset for dwc3-xilinx driver. The PHY
needs to be reset after the completion of phy initialization. As part
of the reset, check for gpio-reset binding before toggling the pin.
This feature is advantageous when the user toggle GPIO to trigger the
ULPI-PHY reset.
Delay of milliseconds is added in between low and high to meet the setup
and hold time requirement of the reset. The reset-gpio error handling is
added for error notification.
Some GPIO controllers must be accessed using message-based buses, like
I2C or SPI, to address this problem, updates GPIO access with sleep API.
This reset is specific to the zynqMp.
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Link: https://lore.kernel.org/r/20220504075309.6244-3-piyush.mehta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is no longer needed. The sysdev pointer is now used when
assigning the ACPI companions to the xHCI ports and USB
devices.
Assigning the ACPI companion here resulted in the
fwnode->secondary pointer to be replaced also for the parent
dwc3 device since the primary fwnode (the ACPI companion)
was shared. That was unintentional and it created potential
side effects like resource leaks.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220428111056.3558-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The controller device (hcd) does not always have the ACPI
companion assigned to it at all. We can not rely on it when
finding the ACPI companion for the root hub. Instead we need
to use the sysdev pointer.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220428111056.3558-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After moving the omap1 platform into generalized multiplatform
support on ARM, the kernel test robot points out a W=1 warning that
now shows up in more configurations:
drivers/usb/host/ehci-omap.c:64:19: warning: unused function 'ehci_read'
The function was last used 9 years ago and can just be removed.
Fixes: 87425ad363 ("USB: ehci-omap: Remove PHY reset handling code")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220428102314.950323-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently when driver->match_existing_only is true, the error return is
set to -EBUSY however ret is then set to 0 at the end of the if/else
statement. I believe the ret = 0 statement should be set in the else
part of the if statement and not at the end to ensure -EBUSY is being
returned correctly.
Detected by clang scan:
drivers/usb/gadget/udc/core.c:1558:4: warning: Value stored to 'ret' is
never read [deadcode.DeadStores]
Fixes: fc274c1e99 ("USB: gadget: Add a new bus for gadgets")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220504135840.232209-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UDC driver should not touch gadget's driver internals, especially it
should not reset driver->bus. This wasn't harmful so far, but since
commit fc274c1e99 ("USB: gadget: Add a new bus for gadgets") gadget
subsystem got it's own bus and messing with ->bus triggers the
following NULL pointer dereference:
dwc2 12480000.hsotg: bound driver g_ether
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: ...
CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at module_add_driver+0x44/0xe8
LR is at sysfs_do_create_link_sd+0x84/0xe0
...
Process modprobe (pid: 620, stack limit = 0x(ptrval))
...
module_add_driver from bus_add_driver+0xf4/0x1e4
bus_add_driver from driver_register+0x78/0x10c
driver_register from usb_gadget_register_driver_owner+0x40/0xb4
usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0
do_one_initcall from do_init_module+0x44/0x1c8
do_init_module from load_module+0x19b8/0x1b9c
load_module from sys_finit_module+0xdc/0xfc
sys_finit_module from ret_fast_syscall+0x0/0x54
Exception stack(0xf1771fa8 to 0xf1771ff0)
...
dwc2 12480000.hsotg: new device is high-speed
---[ end trace 0000000000000000 ]---
Fix this by removing driver->bus entry reset.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The latency is an unsigned int and should be printed as such (even if it
only holds values in the range 0..255).
Signed-off-by: Daniels Umanovskis <du@axentia.se>
Link: https://lore.kernel.org/r/20220426123714.2000-1-du@axentia.se
[ johan: amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Add the device id for the HPLM930Display which is a PL2303GC based
device.
Signed-off-by: Scott Chen <scott@labau.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
This reverts commit 0298b4b95c.
The series still has built errors as reported in linux-next, so revert
it for now.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit c40b62216c.
The series still has built errors as reported in linux-next, so revert
it for now.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge 5.18-rc5 into usb-next
We need the USB fixes in here, and this resolves a merge issue in
drivers/usb/dwc3/drd.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UCSI mailbox is always in main memory.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While support for working with a vbus was added, the regulator was never
actually gotten (despite what was documented). Fix this by actually
getting the supply from the device tree.
Fixes: 7acc9973e3 ("usb: phy: generic: add vbus support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220425171412.1188485-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the user sets the usb_request's no_interrupt, then there will be no
completion event for the request. Currently the driver incorrectly uses
the event status of a different request to report the status for a
request with no_interrupt. The dwc3 driver needs to check the TRB status
associated with the request when reporting its status.
Note: this is only applicable to missed_isoc TRB completion status, but
the other status are also listed for completeness/documentation.
Fixes: 6d8a019614 ("usb: dwc3: gadget: check for Missed Isoc from event status")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/db2c80108286cfd108adb05bad52138b78d7c3a7.1650673655.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call onboard_hub_create/destroy_pdevs() from usb_add/remove_hcd()
for primary HCDs to create/destroy platform devices for onboard
USB hubs that may be connected to the root hub of the controller.
These functions are a NOP unless CONFIG_USB_ONBOARD_HUB=y/m.
Also add a field to struct usb_hcd to keep track of the onboard hub
platform devices that are owned by the HCD.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220217104219.v21.3.I7a3a7d9d2126c34079b1cab87aa0b2ec3030f9b7@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.
Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.
Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).
Note: the current series only supports hubs connected directly to
a root hub, support for other configurations could be added if
needed.
Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220217104219.v21.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a "gadget" bus and uses it for registering gadgets and
their drivers. From now on, bindings will be managed by the driver
core rather than through ad-hoc manipulations in the UDC core.
As part of this change, the driver_pending_list is removed. The UDC
core won't need to keep track of unbound drivers for later binding,
because the driver core handles all of that for us.
However, we do need one new feature: a way to prevent gadget drivers
from being bound to more than one gadget at a time. The existing code
does this automatically, but the driver core doesn't -- it's perfectly
happy to bind a single driver to all the matching devices on the bus.
The patch adds a new bitflag to the usb_gadget_driver structure for
this purpose.
A nice side effect of this change is a reduction in the total lines of
code, since now the driver core will do part of the work that the UDC
used to do.
A possible future patch could add udc devices to the gadget bus, say
as a separate device type.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YmSpdxaDNeC2BBOf@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes some minor mistakes in the UDC core's kerneldoc.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YmSpKpnWR8WWEk/p@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for adding a "gadget" bus, this patch reverses the
order of registration of udc and gadget devices in usb_add_gadget().
The current code adds the gadget device first, probably because that
was more convenient at the time and the order didn't really matter.
But with the upcoming change, adding the gadget will cause driver
probing to occur. Unwinding that on the error pathway will become
much more obtrusive, not to mention the fact that a gadget driver
might not work properly before the udc is registered. It's better to
register the udc device first, particularly since that doesn't involve
a bus or driver binding and therefore is simpler to unwind.
For symmetry, the order of unregistration in usb_del_gadget() is
likewise reversed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YmSo6fU1FlNq8cOZ@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for adding a "gadget" bus, this patch renames
usb_gadget_probe_driver() to usb_gadget_register_driver(). The new
name will be more accurate, since gadget drivers will be registered on
the gadget bus and the probing will be done by the driver core, not
the UDC core.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YmSc29YZvxgT5fEJ@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB device dump code often checks for the buffer overflow just before
calling the functions that do that first thing anyways. Such checks are
redundant and may be dropped...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/0453cb0d-7b2b-25e6-50e3-091610951e58@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with
support for analog audio headsets. It allows sharing a common USB Type-C
port to pass USB2.0 signal, analog audio, sideband use wires and analog
microphone signal.
Due to lacking upstream audio support for testing, the audio muxing is
left untouched, but implementation of muxing the SBU lines is provided
as a pair of Type-C mux and switch devices. This provides the necessary
support for enabling the DisplayPort altmode on devices with this
circuit.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422222351.1297276-8-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the Qualcomm platforms the USB/DP PHY handles muxing and orientation
switching of the SuperSpeed lines, but the SBU lines needs to be
connected and switched by external (to the SoC) hardware.
It's therefor necessary to be able to have the TypeC controller operate
multiple TypeC muxes and switches. Use the newly introduced indirection
object to handle this, to avoid having to taint the TypeC controllers
with knowledge about the downstream hardware configuration.
The max number of devs per indirection is set to 3, which account for
being able to mux/switch the USB HS, SS and SBU lines, as per defined
defined in the usb-c-connector binding. This number could be grown if
need arrises at a later point in time.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422222351.1297276-6-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rather than directly exposing the implementation's representation of the
typec muxes to the controller/clients, introduce an indirection object.
This enables the introduction of turning this relationship into a
one-to-many in the following patch.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422222351.1297276-5-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's possible that dev_set_name() returns -ENOMEM, catch and handle this.
Fixes: 3370db3519 ("usb: typec: Registering real device entries for the muxes")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422222351.1297276-4-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When role switch module probe late than ucsi module,
fwnode_usb_role_switch_get() will return -EPROBE_DEFER,
it is better to restart ucsi init work to find
it again every 100ms, total wait time is 10 second.
It also means change ucsi init work to delayed_work.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1650881886-25530-3-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In error path of ucsi_init(), it will unregister all valid ucsi connectors,
and similar operation also happen in ucsi_unregister(),
add a common function ucsi_unregister_connectors() for two places,
inside this function, if con->wq is NULL, it will break the loop,
if other kind of error happen after con->wq allocated,
ucsi/typec related API is safe to unregister.
Also in ucsi_init(), it allocate number of (ucsi->cap.num_connectors + 1)
connectors, there is one extra as the ending,
ucsi_unregister_connectors() is safe to unregister all ucsi connectors
according ucsi->cap.num_connectors,
remove the extra one connector to save memory.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1650881886-25530-2-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's a fix for a potential overflow issue in the whiteheat driver when
using the old ARM ABI.
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYmLFwAAKCRALxc3C7H1l
CBEJAPsFi1BAoDxeTHOF5sXsOltAJQFxx6l1DJZnNN41iFWJOgEAgsq6pWxHb6sp
xnrg1NjZ3SkF0TRYteVnSP6M2MbBpgQ=
=y5s6
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.18-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.18-rc4
Here's a fix for a potential overflow issue in the whiteheat driver when
using the old ARM ABI.
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.18-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS
USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader
USB: serial: option: add support for Cinterion MV32-WA/MV32-WB
USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions
The third argument of usb_maxpacket(): in_out has been deprecated
because it could be derived from the second argument (e.g. using
usb_pipeout(pipe)).
N.B. function usb_maxpacket() was made variadic to accommodate the
transition from the old prototype with three arguments to the new one
with only two arguments (so that no renaming is needed). The variadic
argument is to be removed once all users of usb_maxpacket() get
migrated.
CC: Duncan Sands <duncan.sands@free.fr>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Olav Kongas <ok@artecdesign.ee>
CC: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220317035514.6378-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The documentation for the freeze() method says that it "should quiesce
the device so that it doesn't generate IRQs or DMA". The unspoken
consequence of not doing this is that MSIs aimed at non-boot CPUs may
get fully lost if they're sent during the period where the target CPU is
offline.
The current callbacks for USB HCD do not fully quiesce interrupts,
specifically on XHCI. Change to use the full suspend/resume flow for
freeze/thaw to ensure interrupts are fully quiesced. This fixes issues
where USB devices fail to thaw during hibernation because XHCI misses
its interrupt and cannot recover.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20220421103751.v3.2.I8226c7fdae88329ef70957b96a39b346c69a914e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PM_EVENT_FREEZE and PM_EVENT_QUIESCE messages should cause the
device to stop generating interrupts. USB core was previously allowing
devices that were already runtime suspended to keep remote wakeup
enabled if they had gone down that way. This violates the contract with
pm, and can potentially cause MSI interrupts to be lost.
Change that so that if a device is runtime suspended with remote wakeups
enabled, it will be resumed to ensure remote wakeup is always disabled
across a freeze.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20220421103751.v3.1.I2c636c4decc358f5e6c27b810748904cc69beada@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.
Fixes: 8eed00b237 ("usb: dwc3: pci: Runtime resume child device from wq")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20220422062652.10575-1-zhengyongjun3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a deadlock in oxu_bus_suspend(), which is shown below:
(Thread 1) | (Thread 2)
| timer_action()
oxu_bus_suspend() | mod_timer()
spin_lock_irq() //(1) | (wait a time)
... | oxu_watchdog()
del_timer_sync() | spin_lock_irq() //(2)
(wait timer to stop) | ...
We hold oxu->lock in position (1) of thread 1, and use
del_timer_sync() to wait timer to stop, but timer handler
also need oxu->lock in position (2) of thread 2. As a result,
oxu_bus_suspend() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irq(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list_for_each_entry_safe() macro saves the current item (n) and
the item after (n+1), so that n can be safely removed without
corrupting the list. However, when traversing the list and removing
items using gadget giveback, the DWC3 lock is briefly released,
allowing other routines to execute. There is a situation where, while
items are being removed from the cancelled_list using
dwc3_gadget_ep_cleanup_cancelled_requests(), the pullup disable
routine is running in parallel (due to UDC unbind). As the cleanup
routine removes n, and the pullup disable removes n+1, once the
cleanup retakes the DWC3 lock, it references a request who was already
removed/handled. With list debug enabled, this leads to a panic.
Ensure all instances of the macro are replaced where gadget giveback
is used.
Example call stack:
Thread#1:
__dwc3_gadget_ep_set_halt() - CLEAR HALT
-> dwc3_gadget_ep_cleanup_cancelled_requests()
->list_for_each_entry_safe()
->dwc3_gadget_giveback(n)
->dwc3_gadget_del_and_unmap_request()- n deleted[cancelled_list]
->spin_unlock
->Thread#2 executes
...
->dwc3_gadget_giveback(n+1)
->Already removed!
Thread#2:
dwc3_gadget_pullup()
->waiting for dwc3 spin_lock
...
->Thread#1 released lock
->dwc3_stop_active_transfers()
->dwc3_remove_requests()
->fetches n+1 item from cancelled_list (n removed by Thread#1)
->dwc3_gadget_giveback()
->dwc3_gadget_del_and_unmap_request()- n+1 deleted[cancelled_list]
->spin_unlock
Fixes: d4f1afe5e8 ("usb: dwc3: gadget: move requests to cancelled_list")
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220414183521.23451-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_ep_clear_halt() API can be called from the function driver, and
translates to dwc3_gadget_ep_set_halt(). This routine is shared with when
the host issues a clear feature ENDPOINT_HALT, and is differentiated by the
protocol argument. If the following sequence occurs, there can be a
situation where the delayed_status flag is improperly cleared for the wrong
SETUP transaction:
1. Vendor specific control transfer returns USB_GADGET_DELAYED_STATUS.
2. DWC3 gadget sets dwc->delayed_status to '1'.
3. Another function driver issues a usb_ep_clear_halt() call.
4. DWC3 gadget issues dwc3_stop_active_transfer() and sets
DWC3_EP_PENDING_CLEAR_STALL.
5. EP command complete interrupt triggers for the end transfer, and
dwc3_ep0_send_delayed_status() is allowed to run, as delayed_status
is '1' due to step#1.
6. STATUS phase is sent, and delayed_status is cleared.
7. Vendor specific control transfer is finished being handled, and issues
usb_composite_setup_continue(). This results in queuing of a data
phase.
Cache the protocol flag so that DWC3 gadget is aware of when the clear halt
is due to a SETUP request from the host versus when it is sourced from a
function driver. This allows for the EP command complete interrupt to know
if it needs to issue a delayed status phase.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220414073902.21960-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure not to set run_stop bit or link state change request while
initiating soft-reset. Register read-modify-write operation may
unintentionally start the controller before the initialization completes
with its previous DCTL value, which can cause initialization failure.
Fixes: f59dcab176 ("usb: dwc3: core: improve reset sequence")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/6aecbd78328f102003d40ccf18ceeebd411d3703.1650594792.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the extcon device exists, get the mode from the extcon device. If
the controller is DRD and the driver is unable to determine the mode,
only then default the dr_mode to USB_DR_MODE_PERIPHERAL.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Link: https://lore.kernel.org/r/20220403164907.662860-1-andrew.smirnov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If any function like UVC is deactivating gadget as part of composition
switch which results in not calling pullup enablement, it is not getting
enabled after switch to new composition due to this deactivation flag
not cleared. This results in USB enumeration not happening after switch
to new USB composition. Hence clear deactivation flag inside gadget
structure in configfs_composite_unbind() before switch to new USB
composition.
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220413211038.72797-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is odd to call devm_add_action_or_reset() before calling the function
that should be undone.
Either, the "_or_reset" part should be omitted, or the action should be
recorded after the resources have been allocated.
Switch the order of devm_add_action_or_reset() and usb_role_switch_get().
Fixes: 9a1bf58ccd ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/362908699275ecec078381b42d87c817c6965fc6.1648979948.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver uses three clocks and there's no special handling, they're
either enabled or disabled sequentially: migrate to the clk_bulk API
to simplify clock handling.
This patch brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220404145558.93340-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000 SoC,
the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC
from Ingenic.
Introduce support for disable Ingenic overcurrent detection, once
selected, it enables the GOTGCTL register bits VbvalidOvEn and
VbvalidOvVal to disable the VBUS overcurrent detection.
This patch is derived from Dragan Čečavac (in the kernel 3.18.3
tree of CI20). It is very useful for the MIPS Creator CI20 (r1).
Without this patch, OTG port of CI20 has a great probability to
face overcurrent warning, which breaks the OTG functionality.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Dragan Čečavac <dragancecavac@yahoo.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Link: https://lore.kernel.org/r/1649964337-114337-3-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_dump_hub_descriptor() and usb_dump_string() are defined under #ifdef
PROC_EXTRA (while PROC_EXTRA doesn't seem to have ever been #define'd)
since the dawn of the git era -- remove this dead code at last...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/ec08915b-faf2-2f0b-dfb1-048dfa2c67f3@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 8934d3e4d0 ("usb: musb: omap2430: Don't use omap_get_control_dev()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220309111033.24487-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the usb side setting of the USB_CDC_REQ_SEND_BREAK control
is not supported. This patch adds the support.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220406192914.3302636-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve performance of isoc transfers in superspeed by increasing the
number of possible endpoints available, matching that of what was
configured for bulk transfers.
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220420183338.445622-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver, OMAP1 specific, now omits clk_prepare/unprepare() steps, not
supported by OMAP1 custom implementation of clock API. However, non-CCF
stubs of those functions exist for use on such platforms until converted
to CCF.
Update the driver to be compatible with CCF implementation of clock API.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220402114353.130775-1-jmkrzyszt@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver, OMAP1 specific, now omits clk_prepare/unprepare() steps, not
supported by OMAP1 custom implementation of clock API. However, non-CCF
stubs of those functions exist for use on such platforms until converted
to CCF.
Update the driver to be compatible with CCF implementation of clock API.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220402112658.130191-1-jmkrzyszt@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two kerneldoc comments in gadget.c have excess function parameter description or wrong
prototype name and one kerneldoc comment in core.c has an excess function parameter
description, resulting in these three doc-build warnings:
1. ./drivers/usb/dwc3/gadget.c:675: warning: Excess function parameter
'nfifos' description in 'dwc3_gadget_calc_tx_fifo_size'
2. ./drivers/usb/dwc3/gadget.c:700: warning: expecting prototype for
dwc3_gadget_clear_tx_fifo_size(). Prototype was for dwc3_gadget_clear_tx_fifos()
instead
3. ./drivers/usb/dwc3/core.c:347: warning: Excess function parameter 'ref_clk_per'
description in 'dwc3_ref_clk_period'
Fix the warnings by correcting the prototype name and removing excess parameter descriptions.
Signed-off-by: Kushagra Verma <kushagra765@outlook.com>
Link: https://lore.kernel.org/r/SI2PR01MB392995043CACD80884A13764F81C9@SI2PR01MB3929.apcprd01.prod.exchangelabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit ae8709b296 ("USB: core: Make do_proc_control() and
do_proc_bulk() killable") if a device has the USB_QUIRK_DELAY_CTRL_MSG
quirk set, it will temporarily block all other URBs (e.g. interrupts)
while sleeping due to a control.
This results in noticeable delays when, for example, a userspace usbfs
application is sending URB interrupts at a high rate to a keyboard and
simultaneously updates the lock indicators using controls. Interrupts
with direction set to IN are also affected by this, meaning that
delivery of HID reports (containing scancodes) to the usbfs application
is delayed as well.
This patch fixes the regression by calling msleep() while the device
mutex is unlocked, as was the case originally with usb_control_msg().
Fixes: ae8709b296 ("USB: core: Make do_proc_control() and do_proc_bulk() killable")
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/3e299e2a-13b9-ddff-7fee-6845e868bc06@tasossah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the PHY controller node has a "port" dwc3 tries to find an
extcon device even when "usb-role-switch" is present. This happens
because dwc3_get_extcon() sees that "port" node and then calls
extcon_find_edev_by_node() which will always return EPROBE_DEFER
in that case.
On the other hand, even if an extcon was present and dwc3_get_extcon()
was successful it would still be ignored in favor of "usb-role-switch".
Let's just first check if "usb-role-switch" is configured in the device
tree and directly use it instead and only try to look for an extcon
device otherwise.
Fixes: 8a0a137997 ("usb: dwc3: Registering a role switch in the DRD code.")
Cc: stable <stable@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220411155300.9766-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current driver logic checks against 0 to determine whether the
periodic tx/rx threshold settings are set, but we may get bogus values
from uninitialized variables if no device property is set. Properly
default these variables to 0.
Fixes: 938a5ad1d3 ("usb: dwc3: Check for ESS TX/RX threshold config")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/cccfce990b11b730b0dae42f9d217dc6fb988c90.1649727139.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Issue description:
When an OTG port has been switched to device role and then switch back
to host role again, the USB 3.0 Host (XHCI) will not be able to detect
"plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed)
devices until system reboot.
Root cause and Solution:
There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in
toggle_opstate(). At the end of role switch procedure, toggle_opstate()
will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was
set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN
will be skipped hence caused the port cannot detect connected USB 2.0
(Highspeed and Fullspeed) devices. Simply remove the condition check to
solve this issue.
Fixes: d0ed062a8b ("usb: mtu3: dual-role mode support")
Cc: stable@vger.kernel.org
Tested-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Tainping Fang <tianping.fang@mediatek.com>
Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rio_karam_init() should return -ENOMEM instead of
value 0 (USB_STOR_TRANSPORT_GOOD) when allocation fails.
Similarly, it should return -EIO when rio_karma_send_command() fails.
Fixes: dfe0d3ba20 ("USB Storage: add rio karma eject support")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220412144359.28447-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Address the following coccicheck warning:
drivers/usb/gadget/udc/net2280.c:940:20-21: WARNING opportunity for swap().
drivers/usb/gadget/udc/net2280.c:944:25-26: WARNING opportunity for swap().
by using swap() for the swapping of variable values and drop the tmp
variables (`tmp` and `end`) that are not needed any more.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220407100459.3605-1-guozhengkui@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.
platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.
It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220309053611.2081191-1-chi.minghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initFunction is called when probing a new device, its call relation
is like:
USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> isd200_init_info()
That is, the error return of the initFunction should tell USB core what
happened instead of using custom error code like ISD200_ERROR.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022110.3757-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initFunction is called when probing a new device, its call relation
is like:
USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> init_usbat_cd() or init_usbat_flash() -> init_usbat()
That is, the error return of the initFunction should tell USB core what
happened instead of using constant or error code like
USB_STOR_TRANSPORT_FAILED.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022115.3773-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initFunction is called when probing a new device, its call relation
is like:
USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> init_alauda()
That is, the error return of the initFunction should tell USB core what
happened instead of using error code like USB_STOR_TRANSPORT_ERROR.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022058.3741-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc's asm/prom.h brings some headers that it doesn't
need itself.
In order to clean it up in a further step, first clean all
files that include asm/prom.h
Some files don't need asm/prom.h at all. For those ones,
just remove inclusion of asm/prom.h
Some files don't need any of the items provided by asm/prom.h,
but need some of the headers included by asm/prom.h. For those
ones, add the needed headers that are brought by asm/prom.h at
the moment, then remove asm/prom.h
Some files really need asm/prom.h but also need some of the
headers included by asm/prom.h. For those one, leave asm/prom.h
but also add the needed headers so that they can be removed
from asm/prom.h in a later step.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/295e87a3094a92784657f7060fb0927e762a2e3c.1650011506.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function documentation of usb_set_configuration says that its
callers should hold the device lock. This lock is held for all
callsites except tweak_set_configuration_cmd. The code path can be
executed for example when attaching a remote USB device.
The solution is to surround the call by the device lock.
This bug was found using my experimental own-developed static analysis
tool, which reported the missing lock on v5.17.2. I manually verified
this bug report by doing code review as well. I runtime checked that
the required lock is not held. I compiled and runtime tested this on
x86_64 with a USB mouse. After applying this patch, my analyser no
longer reports this potential bug.
Fixes: 2c8c981589 ("staging: usbip: let client choose device configuration")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220412165055.257113-1-dossche.niels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_get_dev() is called in stub_device_alloc(). When stub_probe() fails
after that, usb_put_dev() needs to be called to release the reference.
Fix this by moving usb_put_dev() to sdev_free error path handling.
Find this by code review.
Fixes: 3ff6744575 ("usbip: fix error handling in stub_probe()")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220412020257.9767-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alderlake has two XHCI controllers with PCI IDs 0x461e and 0x51ed. We
had previously added the quirk to default enable runtime PM for 0x461e,
now add it for 0x51ed as well.
Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220408114225.1.Ibcff6b86ed4eacfe4c4bc89c90e18416f3900a3e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 33fb697ec7 ("usb: dwc3: Get clocks individually") moved from
the clk_bulk api to individual clocks, following the snps,dwc3.yaml
dt-binding for clock names.
Unfortunately the rk3328 (and upcoming rk356x support) use the
rockchip,dwc3.yaml which has different clock names, which are common on
devices using the glue layer.
The rk3328 does not use a glue layer, but attaches directly to the dwc3
core driver.
The offending patch series failed to account for this, thus dwc3 was
broken on rk3328.
To retain backwards compatibility with rk3328 device trees we must also
check for the alternate clock names.
Fixes: 33fb697ec7 ("usb: dwc3: Get clocks individually")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220409152116.3834354-1-pgwipeout@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_put_dev shouldn't be called when uss720_probe succeeds because of
priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL
before destroy_priv in uss720_disconnect because usb_put_dev is in
destroy_priv.
Fix this by moving priv->usbdev = NULL after usb_put_dev.
Fixes: dcb4b8ad6a ("misc/uss720: fix memory leak in uss720_probe")
Cc: stable <stable@kernel.org>
Reviewed-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220407024001.11761-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In zhaoxin platform, some ehci projects will latch a wakeup signal
internal when plug in a device on port during system S0. This wakeup
signal will turn on when ehci runtime suspend, which will trigger a
system control interrupt that will resume ehci back to D0. As no
device connect, ehci will be set to runtime suspend and turn on the
internal latched wakeup signal again. It will cause a suspend-resume
loop and generate system control interrupt continuously.
Fixed this issue by clear wakeup signal latched in ehci internal when
ehci resume callback is called.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Link: https://lore.kernel.org/r/20220324121735.3803-1-WeitaoWang-oc@zhaoxin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Building without CONFIG_POWER_SUPPLY will fail:
drivers/usb/typec/rt1719.o: In function `rt1719_psy_set_property':
rt1719.c:(.text+0x10a): undefined reference to `power_supply_get_drvdata'
drivers/usb/typec/rt1719.o: In function `rt1719_psy_get_property':
rt1719.c:(.text+0x2c8): undefined reference to `power_supply_get_drvdata'
drivers/usb/typec/rt1719.o: In function `devm_rt1719_psy_register':
rt1719.c:(.text+0x3e9): undefined reference to `devm_power_supply_register'
drivers/usb/typec/rt1719.o: In function `rt1719_irq_handler':
rt1719.c:(.text+0xf9f): undefined reference to `power_supply_changed'
drivers/usb/typec/rt1719.o: In function `rt1719_update_pwr_opmode.part.9':
rt1719.c:(.text+0x657): undefined reference to `power_supply_changed'
drivers/usb/typec/rt1719.o: In function `rt1719_attach':
rt1719.c:(.text+0x83e): undefined reference to `power_supply_changed'
Add POWER_SUPPLY dependency to Kconfig.
Fixes: 25d29b9809 ("usb: typec: rt1719: Add support for Richtek RT1719")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220418082425.41566-1-renzhijie2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 41a7426d25 ("usb: xhci: tegra: Unlink power domain devices")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220319023822.145641-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In AM62 SoC, the Designware Core USB3 IP is progammed to operate in USB2.0
only mode. Add driver for AM62 USB DWC3 Wrapper.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220414103211.16202-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of refetching power status cache it and only update it when a
change is signalled via irq. This simplifies tracing and adding more
supply properties in follow up patches.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220317154518.4082046-2-sebastian.krzyszkowiak@puri.sm
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are few scenerio when PMC reports 'busy condition' and command
fail.
If PMC receives a high priority command while servicing a low priority
command then it discards the low priority command and start servicing
the high priority command. The lower priority command fail and driver
returns error. If the same command resend to the PMC then PMC latches
the command and service it accordingly.
Thus adds the retry logic for the PMC command.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Tanveer Alam <tanveer1.alam@intel.com>
Link: https://lore.kernel.org/r/20220328105137.6223-1-tanveer1.alam@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The exit condition to quit iterating over the sg_list, while encoding
the sg entries, has to consider the case that the dma_len of the entry
could be zero. This patch takes this condition to account.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On uvc_video_encode_isoc_sg the mapped vb2 buffer is returned
to early. Only after the last usb_request worked with the buffer
it is allowed to give it back to vb2. This patch fixes that.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function uvcg_queue_next_buffer is used different than its name
suggests. The return value nextbuf is never used by any caller. This
patch reworks the function to its actual purpose, by removing the unused
code and renaming it. The function name uvcg_complete_buffer makes it
more clear that it is actually marking the current video buffer as
complete.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pause flag doesn't appear to serve a purpose as it is possible for
the pump worker thread to not be running when new buffers are queued.
Before the following change was introduced: "43cd0023872e usb: gadget:
uvc_video: add worker to handle the frame pumping", the pause flag
status was discarded and never returned. This masked a current issues of
the userspace receiving non-zero values (considered unsuccessful) and
prevents trace_v4l2_qbuf() from being called.
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220413192402.26063-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a configfs entry, "function_name", to change the iInterface field
for VideoControl. This name is used on host devices for user selection,
useful when multiple cameras are present. The default will remain "UVC
Camera".
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220401160447.5919-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most of the plat-omap/dma.c code is specific to the USB
driver. Hide that code when it is not in use, to make it
clearer which parts are actually still required.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The innovator board needs a special case for its phy control.
Move the corresponding code into the board file and out of the
common code by adding another callback.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The omap usb drivers still rely on mach/*.h headers that
are explicitly or implicitly included, but all the required
definitions are now in include/linux/soc/ti/, so use those
instead and allow compile-testing on other architectures.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The register definitions in this header are used in at least four
different places, with little hope of completely cleaning that up.
Split up the file into a portion that becomes a linux-wide header
under include/linux/soc/ti/, and the parts that are actually only
needed by board files.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n
due to "-mabi=apcs-gnu", even though it has a single u8:
whiteheat_private {
__u8 mcr; /* 0 1 */
/* size: 4, cachelines: 1, members: 1 */
/* padding: 3 */
/* last cacheline: 4 bytes */
};
The result is technically harmless, as both the source and the
destinations are currently the same allocation size (4 bytes) and don't
use their padding, but if anything were to ever be added after the
"mcr" member in "struct whiteheat_private", it would be overwritten. The
structs both have a single u8 "mcr" member, but are 4 bytes in padded
size. The memcpy() destination was explicitly targeting the u8 member
(size 1) with the length of the whole structure (size 4), triggering
the memcpy buffer overflow warning:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:11,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/lockdep.h:14,
from include/linux/spinlock.h:62,
from include/linux/mmzone.h:8,
from include/linux/gfp.h:6,
from include/linux/slab.h:15,
from drivers/usb/serial/whiteheat.c:17:
In function 'fortify_memcpy_chk',
inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4:
include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
328 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Instead, just assign the one byte directly.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202204142318.vDqjjSFn-lkp@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220421001234.2421107-1-keescook@chromium.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The mach/hardware.h is included in lots of places, and it provides
three different things on pxa:
- the cpu_is_pxa* macros
- an indirect inclusion of mach/addr-map.h
- the __REG() and io_pv2() helper macros
Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h
headers, then change all the files that use mach/hardware.h to
include the exact set of those three headers that they actually
need, allowing for further more targeted cleanup.
linux/soc/pxa/cpu.h can remain permanently exported and is now in
a global location along with similar headers. pxa-regs.h and
addr-map.h are only used in a very small number of drivers now
and can be moved to arch/arm/mach-pxa/ directly when those drivers
are to pass the necessary data as resources.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
During the uvcg_video_pump() process, if an error occurs and
uvcg_queue_cancel() is called, the buffer queue will be cleared out, but
the current marker (queue->buf_used) of the active buffer (no longer
active) is not reset. On the next iteration of uvcg_video_pump() the
stale buf_used count will be used and the logic of min((unsigned
int)len, buf->bytesused - queue->buf_used) may incorrectly calculate a
nbytes size, causing an invalid memory access.
[80802.185460][ T315] configfs-gadget gadget: uvc: VS request completed
with status -18.
[80802.185519][ T315] configfs-gadget gadget: uvc: VS request completed
with status -18.
...
uvcg_queue_cancel() is called and the queue is cleared out, but the
marker queue->buf_used is not reset.
...
[80802.262328][ T8682] Unable to handle kernel paging request at virtual
address ffffffc03af9f000
...
...
[80802.263138][ T8682] Call trace:
[80802.263146][ T8682] __memcpy+0x12c/0x180
[80802.263155][ T8682] uvcg_video_pump+0xcc/0x1e0
[80802.263165][ T8682] process_one_work+0x2cc/0x568
[80802.263173][ T8682] worker_thread+0x28c/0x518
[80802.263181][ T8682] kthread+0x160/0x170
[80802.263188][ T8682] ret_from_fork+0x10/0x18
[80802.263198][ T8682] Code: a8c12829 a88130cb a8c130
Fixes: d692522577 ("usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220331184024.23918-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This has been reported to stall if queried
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device is reported to stall when enummerated.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Path fixes bug which occurs during resetting endpoint in
__cdns3_gadget_ep_clear_halt function. During resetting endpoint
controller will change HW/DMA owned TRB. It set Abort flag in
trb->control and will change trb->length field. If driver want
to use the aborted trb it must update the changed field in
TRB.
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20220329084605.4022-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The first U3 wake signal by the host may be lost if the USB 3 connection is
tunneled over USB4, with a runtime suspended USB4 host, and firmware
implemented connection manager.
Specs state the host must wait 100ms (tU3WakeupRetryDelay) before
resending a U3 wake signal if device doesn't respond, leading to U3 -> U0
link transition times around 270ms in the tunneled case.
Fixes: 0200b9f790 ("xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While rebooting, XHCI controller and its bus device will be shut down
in order by .shutdown callback. Stopping roothubs polling in
xhci_shutdown() can prevent XHCI driver from accessing port status
after its bus device shutdown.
Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs
polling, XHCI driver may access PCIe BAR register for port status after
parent PCIe root port driver is shutdown and cause PCIe bus error.
[check shared hcd exist before stopping its roothub polling -Mathias]
Cc: stable@vger.kernel.org
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some situations software handles TRB events slower than adding TRBs.
If the number of TRB events to be processed in a given interrupt is exactly
the same as the event ring size 256, then the local variable
"event_ring_deq" that holds the initial dequeue position is equal to
software_dequeue after handling all 256 interrupts.
It will cause driver to not update ERDP to hardware,
Software dequeue pointer is out of sync with ERDP on interrupt exit.
On the next interrupt, the event ring may full but driver will not
update ERDP as software_dequeue is equal to ERDP.
[ 536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37
[ 566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00
[ 572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command.
[ 572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110
[ 572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead
[ 572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD
[ 572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00
[ 572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD
Hardware ERDP is updated mid event handling if there are more than 128
events in an interrupt (half of ring size).
Fix this by updating the software local variable at the same time as
hardware ERDP.
[commit message rewording -Mathias]
Fixes: dc0ffbea57 ("usb: host: xhci: update event ring dequeue pointer on purpose")
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYkF9UwAKCRCAXGG7T9hj
vsXpAPwKXI4WIQcvnVCdULQfuXpA1TbD5XZuS9OuiN/OxWHbzAEA1VHWTmS+tpZ1
ptOyoGhAWhTGeplToobDSGz5qTXEPAI=
=FaKX
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A bunch of minor cleanups
- A fix for kexec in Xen dom0 when executed on a high cpu number
- A fix for resuming after suspend of a Xen guest with assigned PCI
devices
- A fix for a crash due to not disabled preemption when resuming as Xen
dom0
* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix is_xen_pmu()
xen: don't hang when resuming PCI device
arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
xen/grant-table: remove readonly parameter from functions
xen/grant-table: remove gnttab_*transfer*() functions
drivers/xen: use helper macro __ATTR_RW
x86/xen: Fix kerneldoc warning
xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
xen: use time_is_before_eq_jiffies() instead of open coding it
Here are the big set of tty and serial driver changes for 5.18-rc1.
Nothing major, some more good cleanups from Jiri and 2 new serial
drivers. Highlights include:
- termbits cleanups
- export symbol cleanups and other core cleanups from Jiri Slaby
- new sunplus and mvebu uart drivers (amazing that people are
still creating new uarts...)
- samsung serial driver cleanups
- ldisc 29 is now "reserved" for experimental/development line
disciplines
- lots of other tiny fixes and cleanups to serial drivers and
bindings
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkGznQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnFwCgwGD/syV+BH2krgY6cRixZz72vPsAn2RSnicd
2YUwSNCHoL+B7hvQMtDG
=A3X9
-----END PGP SIGNATURE-----
Merge tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver changes for 5.18-rc1.
Nothing major, some more good cleanups from Jiri and 2 new serial
drivers. Highlights include:
- termbits cleanups
- export symbol cleanups and other core cleanups from Jiri Slaby
- new sunplus and mvebu uart drivers (amazing that people are still
creating new uarts...)
- samsung serial driver cleanups
- ldisc 29 is now "reserved" for experimental/development line
disciplines
- lots of other tiny fixes and cleanups to serial drivers and
bindings
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits)
vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE
serial: 8250: fix XOFF/XON sending when DMA is used
tty: serial: samsung: Add ARTPEC-8 support
dt-bindings: serial: samsung: Add ARTPEC-8 UART
serial: sc16is7xx: Clear RS485 bits in the shutdown
tty: serial: samsung: simplify getting OF match data
tty: serial: samsung: constify variables and pointers
tty: serial: samsung: constify s3c24xx_serial_drv_data members
tty: serial: samsung: constify UART name
tty: serial: samsung: constify s3c24xx_serial_drv_data
tty: serial: samsung: reduce number of casts
tty: serial: samsung: embed s3c2410_uartcfg in parent structure
tty: serial: samsung: embed s3c24xx_uart_info in parent structure
serial: 8250_tegra: mark acpi_device_id as unused with !ACPI
tty: serial: bcm63xx: use more precise Kconfig symbol
serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS
tty: serial: jsm: fix two assignments in if conditions
tty: serial: jsm: remove redundant assignments to variable linestatus
serial: 8250_mtk: make two read-only arrays static const
serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
...
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups and
new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list
(a common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
Note, the DTS updates will have a merge conflict in your tree. The
fixup should be simple, but if not, I can provide a merged tree if
needed.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYj7qpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRsQCcCryYifAvE2gHaNfI4B01JRWk7gQAoLNiUgvl
l+srEAXgIVueDhmDxy5P
=/Ppv
-----END PGP SIGNATURE-----
Merge tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups
and new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list (a
common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
dt-bindings: usb: mtk-xhci: add compatible for mt8186
usb: dwc3: Issue core soft reset before enabling run/stop
usb: gadget: Makefile: remove ccflags-y
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
usb: gadget: eliminate anonymous module_init & module_exit
usb: usbip: eliminate anonymous module_init & module_exit
xen/usb: harden xen_hcd against malicious backends
usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
usb: dwc3: gadget: move cmd_endtransfer to extra function
usb: dwc3: gadget: ep_queue simplify isoc start condition
xen/usb: don't use arbitrary_virt_to_machine()
usb: isp1760: remove redundant max_packet() macro
usb: oxu210hp-hcd: remove redundant call to max_packet() macro
usb: common: usb-conn-gpio: Make VBUS supply completely optional
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
usb: early: xhci-dbc: Fix xdbc number parsing
usb: early: xhci-dbc: Remove duplicate keep parsing
x86/tsc: Be consistent about use_tsc_delay()
usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
...
This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes. The high blast radius core update is the removal of
write same, which affects block and several non-SCSI devices. The
other big change, which is more local, is the removal of the SCSI
pointer.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
Ec1HDuUCE18H1H2QAh0=
=/Ty9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
-----BEGIN PGP SIGNATURE-----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=Bc0l
-----END PGP SIGNATURE-----
Merge tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- a major reorg at platform Kconfig/Makefile files, organizing them per
vendor. The other media Kconfig/Makefile files also sorted
- New sensor drivers: hi847, isl7998x, ov08d10
- New Amphion vpu decoder stateful driver
- New Atmel microchip csi2dc driver
- tegra-vde driver promoted from staging
- atomisp: some fixes for it to work on BYT
- imx7-mipi-csis driver promoted from staging and renamed
- camss driver got initial support for VFE hardware version Titan 480
- mtk-vcodec has gained support for MT8192
- lots of driver changes, fixes and improvements
* tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (417 commits)
media: nxp: Restrict VIDEO_IMX_MIPI_CSIS to ARCH_MXC or COMPILE_TEST
media: amphion: cleanup media device if register it fail
media: amphion: fix some issues to improve robust
media: amphion: fix some error related with undefined reference to __divdi3
media: amphion: fix an issue that using pm_runtime_get_sync incorrectly
media: vidtv: use vfree() for memory allocated with vzalloc()
media: m5mols/m5mols.h: document new reset field
media: pixfmt-yuv-planar.rst: fix PIX_FMT labels
media: platform: Remove unnecessary print function dev_err()
media: amphion: Add missing of_node_put() in vpu_core_parse_dt()
media: mtk-vcodec: Add missing of_node_put() in mtk_vdec_hw_prob_done()
media: platform: amphion: Fix build error without MAILBOX
media: spi: Kconfig: Place SPI drivers on a single menu
media: i2c: Kconfig: move camera drivers to the top
media: atomisp: fix bad usage at error handling logic
media: platform: rename mediatek/mtk-jpeg/ to mediatek/jpeg/
media: media/*/Kconfig: sort entries
media: Kconfig: cleanup VIDEO_DEV dependencies
media: platform/*/Kconfig: make manufacturer menus more uniform
media: platform: Create vendor/{Makefile,Kconfig} files
...
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural
support for LPI to avoid using it on x86 by mistake (Mario
Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver
to work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix
up white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
-----BEGIN PGP SIGNATURE-----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=WlR9
-----END PGP SIGNATURE-----
Merge tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.
Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.
Specifics:
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui)"
* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Use ida_alloc() instead of ida_simple_get() for ACPI enumeration
of devices (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=uB8P
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new functionality perspective, the most significant items
here are the new driver for the 'ARM Generic Diagnostic Dump and
Reset' device, the extension of fine grain fan control in the ACPI fan
driver, and the change making it possible to use CPPC information to
obtain CPU capacity.
There are also a few new quirks, a bunch of fixes, including the
platform-level _OSC handling change to make it actually take the
platform firmware response into account, some code and documentation
cleanups, and a notable update of the ACPI device enumeration
documentation.
Specifics:
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Use ida_alloc() instead of ida_simple_get() for ACPI enumeration of
devices (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko)"
* tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
clocksource: acpi_pm: fix return value of __setup handler
ACPI: bus: Avoid using CPPC if not supported by firmware
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
arm64, topology: enable use of init_cpu_capacity_cppc()
arch_topology: obtain cpu capacity using information from CPPC
x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()
ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
ACPI: tables: Add AGDI to the list of known table signatures
ACPI/APEI: Limit printable size of BERT table data
ACPI: docs: gpio-properties: Unify ASL style for GPIO examples
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
ACPI: APEI: fix return value of __setup handlers
x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
x86: Expose init_freq_invariance() to topology header
x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
ACPICA: Avoid walking the ACPI Namespace if it is not there
...
These functions are page cache functionality and don't need to be
declared in fs.h.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Here are some small remaining USB fixes for 5.17-final.
They include:
- two USB gadget driver fixes for reported problems
- usbtmc driver fix for syzbot found issues
- musb patch partial revert to resolve a reported regression.
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYjWSaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yntPwCbBiAyqbzAjZnKC8HIFN/AbfAt3mMAn3zwhpSg
Sbgoj2DwSpS6mTxXRy43
=/Z/U
-----END PGP SIGNATURE-----
Merge tag 'usb-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small remaining USB fixes for 5.17-final.
They include:
- two USB gadget driver fixes for reported problems
- usbtmc driver fix for syzbot found issues
- musb patch partial revert to resolve a reported regression.
All of these have been in linux-next this week with no reported
problems"
* tag 'usb-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: Fix use-after-free bug by not setting udc->dev.driver
usb: usbtmc: Fix bug in pipe direction for control transfers
partially Revert "usb: musb: Set the DT node on the child device"
usb: gadget: rndis: prevent integer overflow in rndis_set_response()
Merge changes related to system sleep, PM domains changes and power
management documentation changes for 5.18-rc1:
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
* pm-sleep:
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
PM: sleep: Add device name to suspend_report_result()
PM: suspend: fix return value of __setup handler
PM: hibernate: fix __setup handler error handling
PM: hibernate: Clean up non-kernel-doc comments
PM: sleep: wakeup: Fix typos in comments
PM: hibernate: fix load_image_and_restore() error path
* pm-domains:
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()
PM: domains: use dev_err_probe() to simplify error handling
PM: domains: Prevent power off for parent unless child is in deepest state
* pm-docs:
Documentation: admin-guide: pm: Document uncore frequency scaling
Merge ACPICA changes, ACPI OS-layer changes, ACPI bus-type and _OSC
support changes and ACPI tables parsing changes for 5.18-rc1:
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
* acpica:
ACPICA: Avoid walking the ACPI Namespace if it is not there
ACPICA: Use uintptr_t and offsetof() in Linux kernel builds
* acpi-osl:
ACPI: OSL: Fix and clean up acpi_os_read/write_port()
* acpi-bus:
ACPI: bus: Avoid using CPPC if not supported by firmware
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: bus: Introduce acpi_bus_for_each_dev()
* acpi-tables:
ACPI: tables: Add AGDI to the list of known table signatures
ACPI: tables: Add CEDT signature to the list of known tables
It is recommended by the Synopsis databook to issue a DCTL.CSftReset
when reconnecting from a device-initiated disconnect routine. This
resolves issues with enumeration during fast composition switching
cases, which result in an unknown device on the host.
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220316011358.3057-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel test robot found a problem with the ene_ub6250 subdriver in
usb-storage: It uses structures containing bitfields to represent
hardware bits in its SD_STATUS, MS_STATUS, and SM_STATUS bytes. This
is not safe; it presumes a particular bit ordering and it assumes the
compiler will not insert padding, neither of which is guaranteed.
This patch fixes the problem by changing the structures to simple u8
values, with the bitfields replaced by bitmask constants.
CC: <stable@vger.kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YjOcbuU106UpJ/V8@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
Example 1: (System.map)
ffffffff832fc78c t init
ffffffff832fc79e t init
ffffffff832fc8f8 t init
Example 2: (initcall_debug log)
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 15 usecs
calling init+0x0/0x60 @ 1
initcall init+0x0/0x60 returned 0 after 2 usecs
calling init+0x0/0x9a @ 1
initcall init+0x0/0x9a returned 0 after 74 usecs
Fixes: bd25a14edb ("usb: gadget: legacy/serial: allow dynamic removal")
Fixes: 7bb5ea54be ("usb gadget serial: use composite gadget framework")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/20220316192010.19001-7-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
Example 1: (System.map)
ffffffff832fc78c t init
ffffffff832fc79e t init
ffffffff832fc8f8 t init
Example 2: (initcall_debug log)
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 15 usecs
calling init+0x0/0x60 @ 1
initcall init+0x0/0x60 returned 0 after 2 usecs
calling init+0x0/0x9a @ 1
initcall init+0x0/0x9a returned 0 after 74 usecs
Fixes: 80fd9cd52d ("usbip: vudc: Add VUDC main file")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/20220316192010.19001-8-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.
On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
1) enable Video4Linux and make its Kconfig options to appear;
2) it makes the Kernel build the V4L core.
while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.
With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.
At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:
menu "Video4Linux options"
visible if VIDEO_DEV
source "drivers/media/v4l2-core/Kconfig"
endmenu
but it doesn't affect anymore the V4L core drivers.
The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:
config VIDEO_V4L2
tristate
depends on (I2C || I2C=n) && VIDEO_DEV
select RATIONAL
select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
default (I2C || I2C=n) && VIDEO_DEV
In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.
Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make sure a malicious backend can't cause any harm other than wrong
I/O data.
Missing are verification of the request id in a response, sanitizing
the reported actual I/O length, and protection against interrupt storms
from the backend.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220311103509.12908-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIuUskeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGCFkH/2n3mpGXuITp0ZXE
TNrpbdZOof5SgLw+w7THswXuo6m5yRGNKQs9fvIvDD8Vf7/OdQQfPOmF1cIE5+nk
wcz6aHKbdrok8Jql2qjJqWXZ5xbGj6qywg3zZrwOUsCKFP5p+AjBJcmZOsvQHjSp
ASODy1moOlK+nO52TrMaJw74a8xQPmQiNa+T2P+FedEYjlcRH/c7hLJ7GEnL6+cC
/R4bATZq3tiInbTBlkC0hR0iVNgRXwXNyv9PEXrYYYHnekh8G1mgSNf06iejLcsG
aAYsW9NyPxu8zPhhHNx79K9o8BMtxGD4YQpsfdfIEnf9Q3euqAKe2evRWqHHlDms
RuSCtsc=
=M9Nc
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rc8' into usb-next
We need the Xen USB fixes as other patches depend on those changes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gnttab_end_foreign_access() family of functions is taking a
"readonly" parameter, which isn't used. Remove it from the function
parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220311103429.12845-3-jgross@suse.com
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The syzbot fuzzer found a use-after-free bug:
BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320
Read of size 8 at addr ffff88802b934098 by task udevd/3689
CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
dev_uevent+0x712/0x780 drivers/base/core.c:2320
uevent_show+0x1b8/0x380 drivers/base/core.c:2391
dev_attr_show+0x4b/0x90 drivers/base/core.c:2094
Although the bug manifested in the driver core, the real cause was a
race with the gadget core. dev_uevent() does:
if (dev->driver)
add_uevent_var(env, "DRIVER=%s", dev->driver->name);
and between the test and the dereference of dev->driver, the gadget
core sets dev->driver to NULL.
The race wouldn't occur if the gadget core registered its devices on
a real bus, using the standard synchronization techniques of the
driver core. However, it's not necessary to make such a large change
in order to fix this bug; all we need to do is make sure that
udc->dev.driver is always NULL.
In fact, there is no reason for udc->dev.driver ever to be set to
anything, let alone to the value it currently gets: the address of the
gadget's driver. After all, a gadget driver only knows how to manage
a gadget, not how to manage a UDC.
This patch simply removes the statements in the gadget core that touch
udc->dev.driver.
Fixes: 2ccea03a8f ("usb: gadget: introduce UDC Class")
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+348b571beb5eeb70a582@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YiQgukfFFbBnwJ/9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The syzbot fuzzer reported a minor bug in the usbtmc driver:
usb 5-1: BOGUS control dir, pipe 80001e80 doesn't match bRequestType 0
WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412
usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted
5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0
...
Call Trace:
<TASK>
usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153
usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline]
The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for
all of its transfers, whether they are in or out. It's easy to fix.
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+a48e3d1a875240cab5de@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YiEsYTPEE6lOCOA5@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a Setup packet is received but yet to DMA out, the controller will
not process the End Transfer command of any endpoint. Polling of its
DEPCMD.CmdAct may block setting up TRB for Setup packet, causing a
command timeout.
This may occur if the driver doesn’t service the completion interrupt of
the control status stage yet due to system latency, then it won’t
prepare TRB and start the transfer for the next Setup Stage. To the host
side, the control transfer had completed, and the host can send a new
Setup packet at this point.
In the meanwhile, if the driver receives an async call to dequeue a
request (triggering End Transfer) to any endpoint, then the driver will
service that End transfer first, blocking the control status stage
completion handler. Since no TRB is available for the Setup stage, the
Setup packet can’t be DMA’ed out and the End Transfer gets hung.
The driver must not block setting up of the Setup stage. So track and
only issue the End Transfer command only when there’s Setup TRB prepared
so that the controller can DMA out the Setup packet. Delay the End
transfer command if there's no Setup TRB available. This is applicable to
all DWC_usb3x IPs.
Co-developed-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220309205402.4467-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To improve reading the code this patch moves the cases to start_isoc or
return the function under one common condition check.
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220306211251.2281335-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arbitrary_virt_to_machine() is meant to be used in PV guests only.
Replace its usage with virt_to_gfn().
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220311103500.12885-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function usb_endpoint_maxp() (called by usb_maxpacket()) already
does the sanitazation of the USB endpoint max packet size. The call to
max_packet() does the same thing and is thus removed.
The macro max_packet() not being used anymore also gets removed.
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220306075524.706660-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function usb_endpoint_maxp() (called by usb_maxpacket()) already
does the sanitazation of the USB endpoint max packet size. The call to
max_packet() does the same thing and is thus removed.
However, the macro max_packet() is kept because it is used elsewhere
in the file.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220306075524.706660-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It makes sense that if the USB connector is a child of an USB port
providing VBUS supply, there is no need to do it again.
But this does not handle the case where VBUS is controlled by PWR from
USB host controller, without any regulator at all.
Support this by making VBUS pure optional.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220309093842.113260-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rts51x_read_mem() function should return negative error codes.
Currently if the kmalloc() fails it returns USB_STOR_TRANSPORT_ERROR (3)
which is treated as success by the callers.
Fixes: 065e60964e ("ums_realtek: do not use stack memory for DMA")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304073504.GA26464@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kstrtoul() assumes the string contains the number only and is \0
terminated, this is not the case, as such things like:
earlyprintk=xdbc1,keep
go completely sideways. Use simple_strtoul() instead.
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220304152136.035911620@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The generic earlyprintk= parsing already parses the optional ",keep",
no need to duplicate that in the xdbc driver.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220304152135.975568860@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-27-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-26-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-25-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-24-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-23-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.
In preparation to limiting the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-22-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list does not contain the expected element, the value of
list_for_each_entry() iterator will not point to a valid structure.
To avoid type confusion in such case, the list iterator
scope will be limited to list_for_each_entry() loop.
In preparation to limiting scope of a list iterator to the list traversal
loop, use a dedicated pointer to point to the found element [1].
Determining if an element was found is then simply checking if
the pointer is != NULL instead of using the potentially bogus pointer.
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-21-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list does not contain the expected element, the value of
list_for_each_entry() iterator will not point to a valid structure.
To avoid type confusion in such case, the list iterator
scope will be limited to list_for_each_entry() loop.
In preparation to limiting scope of a list iterator to the list traversal
loop, use a dedicated pointer to point to the found element [1].
Determining if an element was found is then simply checking if
the pointer is != NULL instead of using the potentially bogus pointer.
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-20-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list does not contain the expected element, the value of
list_for_each_entry() iterator will not point to a valid structure.
To avoid type confusion in such case, the list iterator
scope will be limited to list_for_each_entry() loop.
In preparation to limiting scope of a list iterator to the list traversal
loop, use a dedicated pointer to point to the found element [1].
Determining if an element was found is then simply checking if
the pointer is != NULL instead of using the potentially bogus pointer.
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-19-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list does not contain the expected element, the value of
list_for_each_entry() iterator will not point to a valid structure.
To avoid type confusion in such case, the list iterator
scope will be limited to list_for_each_entry() loop.
In preparation to limiting scope of a list iterator to the list traversal
loop, use a dedicated pointer to point to the found element [1].
Determining if an element was found is then simply checking if
the pointer is != NULL instead of using the potentially bogus pointer.
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-18-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-17-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-16-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-15-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-14-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-13-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-12-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-11-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-10-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-9-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-8-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-7-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-6-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-5-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-4-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-3-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-2-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts the omap2430 changes of
commit cf081d009c ("usb: musb: Set the DT node on the child device")
Since v5.17-rc1, musb is broken on the gta04 and openpandora devices
(omap3530/dm3730). BeagleBone Black (am335x) seems to work.
Symptoms of this bug are
a) main symptom
[ 21.336517] using random host ethernet address
[ 21.341430] using host ethernet address: 32:70:05:18:ff:78
[ 21.341461] using self ethernet address: 46:10:3a:b3:af:d9
[ 21.358184] usb0: HOST MAC 32:70:05:18:ff:78
[ 21.376678] usb0: MAC 46:10:3a:b3:af:d9
[ 21.388305] using random self ethernet address
[ 21.393371] using random host ethernet address
[ 21.398162] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 21.421081] g_ether gadget: g_ether ready
[ 21.492156] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.691345] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.803192] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.819427] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.124450] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.168518] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.179382] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.213592] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.221832] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.227905] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.239440] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.401000] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.407073] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.426361] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.734466] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.742462] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.750396] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
... (repeats with high frequency)
This stops if the USB cable is unplugged and restarts if it is plugged in again.
b) also found in the log
[ 6.498107] ------------[ cut here ]------------
[ 6.502960] WARNING: CPU: 0 PID: 868 at arch/arm/mach-omap2/omap_hwmod.c:1885 _enable+0x50/0x234
[ 6.512207] omap_hwmod: usb_otg_hs: enabled state can only be entered from initialized, idle, or disabled state
[ 6.522766] Modules linked in: omap2430(+) bmp280_i2c bmp280 itg3200 at24 tsc2007 leds_tca6507 bma180 hmc5843_i2c hmc5843_core industrialio_triggered_buffer lis3lv02d_i2c kfifo_buf lis3lv02d phy_twl4030_usb snd_soc_omap_mcbsp snd_soc_ti_sdma musb_hdrc snd_soc_twl4030 gnss_sirf twl4030_vibra twl4030_madc twl4030_charger twl4030_pwrbutton gnss industrialio ehci_omap omapdrm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks cec
[ 6.566436] CPU: 0 PID: 868 Comm: udevd Not tainted 5.16.0-rc5-letux+ #8251
[ 6.573730] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 6.580322] [<c010ed30>] (unwind_backtrace) from [<c010a1d0>] (show_stack+0x10/0x14)
[ 6.588470] [<c010a1d0>] (show_stack) from [<c0897c14>] (dump_stack_lvl+0x40/0x4c)
[ 6.596405] [<c0897c14>] (dump_stack_lvl) from [<c0130cc4>] (__warn+0xb4/0xdc)
[ 6.604003] [<c0130cc4>] (__warn) from [<c0130d5c>] (warn_slowpath_fmt+0x70/0x9c)
[ 6.611846] [<c0130d5c>] (warn_slowpath_fmt) from [<c011f4d4>] (_enable+0x50/0x234)
[ 6.619903] [<c011f4d4>] (_enable) from [<c012081c>] (omap_hwmod_enable+0x28/0x40)
[ 6.627838] [<c012081c>] (omap_hwmod_enable) from [<c0120ff4>] (omap_device_enable+0x4c/0x78)
[ 6.636779] [<c0120ff4>] (omap_device_enable) from [<c0121030>] (_od_runtime_resume+0x10/0x3c)
[ 6.645812] [<c0121030>] (_od_runtime_resume) from [<c05c688c>] (__rpm_callback+0x3c/0xf4)
[ 6.654510] [<c05c688c>] (__rpm_callback) from [<c05c6994>] (rpm_callback+0x50/0x54)
[ 6.662628] [<c05c6994>] (rpm_callback) from [<c05c66b0>] (rpm_resume+0x448/0x4e4)
[ 6.670593] [<c05c66b0>] (rpm_resume) from [<c05c6784>] (__pm_runtime_resume+0x38/0x50)
[ 6.678985] [<c05c6784>] (__pm_runtime_resume) from [<bf14ab20>] (musb_init_controller+0x350/0xa5c [musb_hdrc])
[ 6.689727] [<bf14ab20>] (musb_init_controller [musb_hdrc]) from [<c05bccb8>] (platform_probe+0x58/0xa8)
[ 6.699737] [<c05bccb8>] (platform_probe) from [<c05badf0>] (really_probe+0x170/0x2fc)
[ 6.708068] [<c05badf0>] (really_probe) from [<c05bb040>] (__driver_probe_device+0xc4/0xd8)
[ 6.716827] [<c05bb040>] (__driver_probe_device) from [<c05bb084>] (driver_probe_device+0x30/0xac)
[ 6.726226] [<c05bb084>] (driver_probe_device) from [<c05bb3d0>] (__device_attach_driver+0x94/0xb4)
[ 6.735717] [<c05bb3d0>] (__device_attach_driver) from [<c05b93f8>] (bus_for_each_drv+0xa0/0xb4)
[ 6.744934] [<c05b93f8>] (bus_for_each_drv) from [<c05bb248>] (__device_attach+0xc0/0x134)
[ 6.753631] [<c05bb248>] (__device_attach) from [<c05b9fcc>] (bus_probe_device+0x28/0x80)
[ 6.762207] [<c05b9fcc>] (bus_probe_device) from [<c05b7e40>] (device_add+0x5fc/0x788)
[ 6.770507] [<c05b7e40>] (device_add) from [<c05bd240>] (platform_device_add+0x70/0x1bc)
[ 6.779022] [<c05bd240>] (platform_device_add) from [<bf177830>] (omap2430_probe+0x260/0x2d4 [omap2430])
[ 6.789001] [<bf177830>] (omap2430_probe [omap2430]) from [<c05bccb8>] (platform_probe+0x58/0xa8)
[ 6.798309] [<c05bccb8>] (platform_probe) from [<c05badf0>] (really_probe+0x170/0x2fc)
[ 6.806610] [<c05badf0>] (really_probe) from [<c05bb040>] (__driver_probe_device+0xc4/0xd8)
[ 6.815399] [<c05bb040>] (__driver_probe_device) from [<c05bb084>] (driver_probe_device+0x30/0xac)
[ 6.824798] [<c05bb084>] (driver_probe_device) from [<c05bb4b4>] (__driver_attach+0xc4/0xd8)
[ 6.833648] [<c05bb4b4>] (__driver_attach) from [<c05b9308>] (bus_for_each_dev+0x64/0xa0)
[ 6.842224] [<c05b9308>] (bus_for_each_dev) from [<c05ba248>] (bus_add_driver+0x148/0x1a4)
[ 6.850891] [<c05ba248>] (bus_add_driver) from [<c05bbd1c>] (driver_register+0xb4/0xf8)
[ 6.859313] [<c05bbd1c>] (driver_register) from [<c0101f54>] (do_one_initcall+0x90/0x1c8)
[ 6.867889] [<c0101f54>] (do_one_initcall) from [<c0893968>] (do_init_module+0x4c/0x204)
[ 6.876373] [<c0893968>] (do_init_module) from [<c01b4c30>] (load_module+0x13f0/0x1928)
[ 6.884796] [<c01b4c30>] (load_module) from [<c01b53a0>] (sys_finit_module+0xa0/0xc0)
[ 6.893005] [<c01b53a0>] (sys_finit_module) from [<c0100080>] (ret_fast_syscall+0x0/0x54)
[ 6.901580] Exception stack(0xc2807fa8 to 0xc2807ff0)
[ 6.906890] 7fa0: b6e517d4 00052068 00000006 b6e509f8 00000000 b6e5131c
[ 6.915466] 7fc0: b6e517d4 00052068 cd718000 0000017b 00020000 00037f78 00050048 00063368
[ 6.924011] 7fe0: bed8fef0 bed8fee0 b6e4ac4b b6f55a42
[ 6.929321] ---[ end trace d715ff121b58763c ]---
c) git bisect result on testing for "musb-hdrc" in the console log:
cf081d009c is the first bad commit
commit cf081d009c
Author: Rob Herring <robh@kernel.org>
Date: Wed Dec 15 17:07:57 2021 -0600
usb: musb: Set the DT node on the child device
The musb glue drivers just copy the glue resources to the musb child device.
Instead, set the musb child device's DT node pointer to the parent device's
node so that platform_get_irq_byname() can find the resources in the DT.
This removes the need for statically populating the IRQ resources from the
DT which has been deprecated for some time.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215230756.2009115-3-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/musb/am35x.c | 2 ++
drivers/usb/musb/da8xx.c | 2 ++
drivers/usb/musb/jz4740.c | 1 +
drivers/usb/musb/mediatek.c | 2 ++
drivers/usb/musb/omap2430.c | 1 +
drivers/usb/musb/ux500.c | 1 +
6 files changed, 9 insertions(+)
Reverting this patch makes musb work again as before.
Fixes: cf081d009c ("usb: musb: Set the DT node on the child device")
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/f62f5fc11f9ecae7e57f3fd66939e051bd3b11fc.1646744166.git.hns@goldelico.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If "BufOffset" is very large the "BufOffset + 8" operation can have an
integer overflow.
Cc: stable@kernel.org
Fixes: 38ea1eac7d ("usb: gadget: rndis: check size of RNDIS_MSG_SET command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220301080424.GA17208@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the PCI device ID and update the dwc3_pci_id_table
for Intel Alder Lake SoC.
The DWC3 controllor in the CPU block handles the USB3 traffic
and the device ID is common across the Alder Lake platforms.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
Link: https://lore.kernel.org/r/20220308170848.30722-1-shruthi.sanil@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the driver will schedule isoc transfers immediately on the
next interval, which is quite aggressive when the interval is 125us.
There's report that some platforms may need more time to process the
transfer, otherwise the controller may miss the first interval. Let's
keep it simple and give the controller at least 500us to schedule the
isoc transfer.
Link: https://lore.kernel.org/linux-usb/20220302143539.GI11577@pengutronix.de/
Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/deb8146b8e1f7f8495ef2d5647017270934cb2d8.1646708142.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the 3.0 device core, if the core is programmed to operate in
2.0 only, then setting the GUCTL1.DEV_FORCE_20_CLK_FOR_30_CLK makes
the internal 2.0(utmi/ulpi) clock to be routed as the 3.0 (pipe)
clock. Enabling this feature allows the pipe3 clock to be not-running
when forcibly operating in 2.0 device mode.
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Bin Yang <yangbin@rock-chips.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220228135700.1089526-6-pgwipeout@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX8MP glue layer has support for the following flags:
* over-current polarity
* PWR pad polarity
* controlling PPC flag in HCCPARAMS register
* permanent port attach for usb2 & usb3 port
Allow setting these flags by supporting specific flags in the glue node.
In order to get this to work an additional IORESOURCE_MEM and clock is
necessary. For backward compatibility this is purely optional.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220218152707.2198357-4-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Until now the iomem used is not USB glue as the name suggests, but
HSIO BLK_CTL. Rename the struct member accordingly. This is a preparing
patch for when USB glue is actually used.
Reviewed-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220218152707.2198357-2-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Constify the drvdata structs. This also matches the definition of
member drvdata in dwc3_meson_g12a.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/a3c178c9-7c33-d7b8-9f6e-734dc28728ab@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we try to use raw_ioctl_ep_enable() for ep5in on a hardware that
only support from ep1-ep4 for both in and out direction, it will return
-EBUSY originally.
I think it will be more intuitive if we return -EINVAL, because -EBUSY
sounds like ep5in is not available now, but might be available in the
future.
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20220311082944.4881-1-jj251510319013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are the USB-serial updates for 5.18-rc1, including:
- a new "simple driver" for some Nokia phones
- a fix for pl2303 GS type detection
- another pl2303 device id
Included is also a clean up.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYisTsAAKCRALxc3C7H1l
CLyHAQDU72G3kyrPkckbrVyhUGnCK875XEZHb+L7Z7OcbLACuAD/aXJg9qg64swI
veJ+HlxgUFi2oLq7AQOU8D9nlUPggAY=
=eZIY
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.18-rc1
Here are the USB-serial updates for 5.18-rc1, including:
- a new "simple driver" for some Nokia phones
- a fix for pl2303 GS type detection
- another pl2303 device id
Included is also a clean up.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: usb_wwan: remove redundant assignment to variable i
USB: serial: pl2303: fix GS type detection
USB: serial: pl2303: add IBM device IDs
USB: serial: simple: add Nokia phone driver
- New support:
- Mediatek tphy support for MT8186
- Qualcomm usb phy support for sc8180x and sc8280xp
- Qualcomm ufs phy support for sc8180x and sc8280xp
- Qualcomm usb phy support for MSM8953
- Cadence D-Phy Rx support
- Sun4i support for USB phy
- Rockchip naneng combo phy support for RK3568
- Qualcomm eDP PHY for sc7280
- Updates:
- wake on support for Synopsis XHCI controllers
- Yamilify Qualcomm USB HS phy binding
- Charger detection support for TI tusb1210
-----BEGIN PGP SIGNATURE-----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=8baK
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy-for-5.18
- New support:
- Mediatek tphy support for MT8186
- Qualcomm usb phy support for sc8180x and sc8280xp
- Qualcomm ufs phy support for sc8180x and sc8280xp
- Qualcomm usb phy support for MSM8953
- Cadence D-Phy Rx support
- Sun4i support for USB phy
- Rockchip naneng combo phy support for RK3568
- Qualcomm eDP PHY for sc7280
- Updates:
- wake on support for Synopsis XHCI controllers
- Yamilify Qualcomm USB HS phy binding
- Charger detection support for TI tusb1210
* tag 'phy-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (53 commits)
phy: qcom-qmp: add sc8280xp UFS PHY
dt-bindings: phy: qcom,qmp: add sc8180x and sc8280xp ufs compatibles
phy: qcom-snps: Add sc8280xp support
dt-bindings: phy: qcom,usb-snps-femto-v2: Add sc8180x and sc8280xp
dt-bindings: Revert "dt-bindings: soc: grf: add naneng combo phy register compatible"
phy: dt-bindings: Add Cadence D-PHY Rx bindings
phy: dt-bindings: cdns,dphy: add power-domains property
phy: dt-bindings: Convert Cadence DPHY binding to YAML
phy: cadence: Add Cadence D-PHY Rx driver
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2L phy bindings
Revert "PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware"
Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720"
Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720"
phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation
phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver configuration
phy: phy-brcm-usb: fixup BCM4908 support
dt-bindings: phy: mediatek,tphy: Add compatible for MT8192
phy: ti: tusb1210: Add charger detection
phy: ti: tusb1210: Add a delay between power-on and restoring the phy-parameters
phy: ti: tusb1210: Drop tusb->vendor_specific2 != 0 check from tusb1210_power_on()
...
Currently, suspend_report_result() prints only function information.
If any driver uses a common PM function, nobody knows who exactly
called the failing function.
A device pinter is needed to recognize the failing device.
For example:
PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 0
PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns 0
become after the change:
serial 00:05: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 0
pci 0000:00:01.3: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns 0
Signed-off-by: Youngjin Jang <yj84.jang@samsung.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Variable i is being assigned a value that is never read, it is being
re-assigned two statements later in a for-loop. The assignment is
redundant and can be removed.
Cleans up clang scan build warning:
drivers/usb/serial/usb_wwan.c:151:2: warning: Value stored to 'i'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
At least some PL2303GS have a bcdDevice of 0x605 instead of 0x100 as the
datasheet claims. Add it to the list of known release numbers for the
HXN (G) type.
Fixes: 894758d057 ("USB: serial: pl2303: tighten type HXN (G) detection")
Reported-by: Matyáš Kroupa <kroupa.matyas@gmail.com>
Link: https://lore.kernel.org/r/165de6a0-43e9-092c-2916-66b115c7fbf4@gmail.com
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Johan Hovold <johan@kernel.org>
The usage of gnttab_end_foreign_access() in xenhcd_gnttab_done() is
not safe against a malicious backend, as the backend could keep the
I/O page mapped and modify it even after the granted memory page is
being used for completely other purposes in the local system.
So replace that use case with gnttab_try_end_foreign_access() and
disable the PV host adapter in case the backend didn't stop using the
granted page.
In xenhcd_urb_request_done() immediately return in case of setting
the device state to "error" instead of looking into further backend
responses.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V2:
- use gnttab_try_end_foreign_access()
IBM manufactures a PL2303 device for UPS communications. Add the vendor
and product IDs so that the PL2303 driver binds to the device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220301224446.21236-1-eajames@linux.ibm.com
Cc: stable@vger.kernel.org
[ johan: amend the SoB chain ]
Signed-off-by: Johan Hovold <johan@kernel.org>
The ret/retval will be set when it used, no need to init at definition.
[modified subject line -Mathias]
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to store temperary value in hcc_params.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The for loop to find page size bit can be replaced with ffs().
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A race between system resume and device-initiated resume may result in
runtime PM imbalance on USB2 root hub. If a device-initiated resume
starts and system resume xhci_bus_resume() directs U0 before hub driver
sees the resuming device in RESUME state, device-initiated resume will
not be finished in xhci_handle_usb2_port_link_resume(). In this case,
usb_hcd_end_port_resume() call is missing.
This changes calls usb_hcd_end_port_resume() if resuming device reaches
U0 to keep runtime PM balance.
Fixes: a231ec41e6 ("xhci: refactor U0 link state handling in get_port_status")
Cc: stable@vger.kernel.org
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_decode_ctrl_ctx() returns the untouched buffer as-is if both "drop"
and "add" parameters are zero.
Fix the function to return an empty string in that case.
It was not immediately clear from the possible call chains whether this
issue is currently actually triggerable or not.
Note that before commit 4843b4b5ec ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes: 90d6d5731d ("xhci: Add tracing for input control context")
Cc: stable@vger.kernel.org
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
commit 4843b4b5ec ("xhci: fix even more unsafe memory usage in xhci tracing")
Link: https://lore.kernel.org/r/20220303110903.1662404-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_decode_usbsts() is expected to return a zero-terminated string by
its only caller, xhci_stop_endpoint_command_watchdog(), which directly
logs the return value:
xhci_warn(xhci, "USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));
However, if no recognized bits are set in usbsts, the function will
return without having called any sprintf() and therefore return an
untouched non-zero-terminated caller-provided buffer, causing garbage
to be output to log.
Fix that by always including the raw value in the output.
Note that before commit 4843b4b5ec ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes: 9c1aa36efd ("xhci: Show host status when watchdog triggers and host is assumed dead.")
Cc: stable@vger.kernel.org
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_reset() timeout was increased from 250ms to 10 seconds in order to
give Renesas 720201 xHC enough time to get ready in probe.
xhci_reset() is called with interrupts disabled in other places, and
waiting for 10 seconds there is not acceptable.
Add a timeout parameter to xhci_reset(), and adjust it back to 250ms
when called from xhci_stop() or xhci_shutdown() where interrupts are
disabled, and successful reset isn't that critical.
This solves issues when deactivating host mode on platforms like SM8450.
For now don't change the timeout if xHC is reset in xhci_resume().
No issues are reported for it, and we need the reset to succeed.
Locking around that reset needs to be revisited later.
Additionally change the signed integer timeout parameter in
xhci_handshake() to a u64 to match the timeout value we pass to
readl_poll_timeout_atomic()
Fixes: 22ceac1912 ("xhci: Increase reset timeout for Renesas 720201 host.")
Cc: stable@vger.kernel.org
Reported-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to bring up the USB3 PHY on the Apple M1 we need to know the
orientation of the Type-C cable. Extract it from the status register and
forward it to the typec subsystem.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220226125912.59828-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to avoid exposing acpi_bus_type to modules, introduce an
acpi_bus_for_each_dev() helper for iterating over all ACPI device
objects and make typec_link_ports() use it instead of the raw
bus_for_each_dev() along with acpi_bus_type.
Having done that, drop the acpi_bus_type export.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Now that each scsi_request is backed by a scsi_cmnd, there is no need to
indirect the CDB storage. Change all submitters of SCSI passthrough
requests to store the CDB information directly in the scsi_cmnd, and while
doing so allocate the full 32 bytes that cover all Linux supported SCSI
hosts instead of requiring dynamic allocation for > 16 byte CDBs. On
64-bit systems this does not change the size of the scsi_cmnd at all, while
on 32-bit systems it slightly increases it for now, but that increase will
be made up by the removal of the remaining scsi_request fields.
Link: https://lore.kernel.org/r/20220224175552.988286-4-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Having a generic UART_LCR_WLEN() macro and the tty_get_char_size()
helper, we can remove all those repeated switch-cases in drivers.
Cc: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220224095558.30929-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the USB fixes in here, and it resolves a merge conflict in:
drivers/usb/dwc3/dwc3-pci.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kerneldoc for usb_get_dev() and usb_get_intf() says that drivers
should always refcount the references they hold for the usb_device or
usb_interface structure, respectively. But this is an overstatement:
In many cases drivers do not access these references after they have
been unbound, and in such cases refcounting is unnecessary.
This patch updates the kerneldoc for the two routines, explaining when
a driver does not need to increment and decrement the refcount. This
should help dispel misconceptions which might otherwise afflict
programmers new to the USB subsystem.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Yhjp4Rp9Alipmwtq@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3241929b67.
Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return
-EOPNOTSUPP from phy_power_on() callback anymore.
So remove XHCI_SKIP_PHY_INIT flag from xhci_mvebu_a3700_plat_setup() and
then also whole xhci_mvebu_a3700_plat_setup() function which is there just
to handle -EOPNOTSUPP for XHCI_SKIP_PHY_INIT.
xhci plat_setup callback is not used by any other xhci plat driver, so
remove this callback completely.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220203214444.1508-5-kabel@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Here's a revert of a commit which erroneously added a device id used for
the EPP/MEM mode of ch341 devices.
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYhd+0wAKCRALxc3C7H1l
CBXUAQCOwSNZ03h+1cfWCbAbAWX8WYmAv+TsiXSEidMAdzAZyQEA4iaz8VumdoqO
hwK2Y1RKjqZ6/Kw8UNQ9/eTjq0tQmwc=
=ysqp
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.17-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.17-rc6
Here's a revert of a commit which erroneously added a device id used for
the EPP/MEM mode of ch341 devices.
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.17-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit LE910R1 compositions
USB: serial: option: add support for DW5829e
Revert "USB: serial: ch341: add new Product ID for CH341A"
The Qualcomm Embedded USB Debugger is not a pluggable USB device, and
can only be present on Qualcomm SoCs. Hence add a dependency on
ARCH_QCOM, to prevent asking the user about this driver when configuring
a kernel without Qualcomm SoC support.
Fixes: 9a1bf58ccd ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f3ba3ea0d7f5e628c71cb7a9d62c9fb4589297b1.1645630266.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This has been allocated just a few lines earlier with a
zalloc(). The value is known and "|=" is a waste of memory
cycles.
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220217133549.27961-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the end of qtd_fill(), we assign the 'int count' variable to the 'size_t
length' field of 'struct ehci_qtd' -- which implies a problematic type cast.
Let's make that variable and the function's result *unsigned int* instead...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/8c64fdeb-5857-8cb3-cfd8-0c248a14b909@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.
Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.
Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.
Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com
Fixes: e5f68b4a3e ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"")
Cc: stable <stable@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Assure that host may not manipulate the index to point
past endpoint array.
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set scsi_host_template.cmd_size instead of using the SCSI pointer for
storing driver-private data. Change the type of the argument of
uas_add_work() from struct uas_cmd_info * into struct scsi_cmnd * because
it is easier to convert a SCSI command pointer into a uas_cmd_info pointer
than the other way around.
This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220218195117.25689-46-bvanassche@acm.org
Cc: linux-usb@vger.kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following two header files have the same file name: include/scsi/scsi.h
and drivers/scsi/scsi.h. This is confusing. Remove the latter since the
following note was added in drivers/scsi/scsi.h in 2004:
"NOTE: this file only contains compatibility glue for old drivers. All
these wrappers will be removed sooner or later. For new code please use
the interfaces declared in the headers in include/scsi/"
Link: https://lore.kernel.org/r/20220218195117.25689-7-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In order for the phy driver to be able to actually get and control
the cs and reset GPIOs the dev_id member of the gpiod_lookup table must
be set to point to the dev_name() of the ulpi-device instantiated by
dwc3_ulpi_init().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-6-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some Android x86 tablets with a Bay Trail (BYT) SoC and a Crystal Cove
PMIC, which does not support charger-detection, rely on the TUSB1211 phy
for charger-detection.
Windows tablets with the same SoC + PMIC often use an extra chip for
charger-detection like the FSA831A. But since on Android tablets
the designers already need to add a TUSB1211 phy to support device/gadget
mode the phy is used to do charger-detection instead.
These Android x86 tablets can be identified by the unique combination of
a Bay Trail SoC (already checked for by PCI-ids) + a Crystal Cove PMIC +
not using the standard ACPI battery and ac drivers. Where as on Windows
tablets the standard ACPI battery and ac drivers will be used on BYT
boards with a Crystal Cove PMIC.
Set a special kernel-internal (so not part of the dt-bindings)
"linux,phy_charger_detect" property on these boards, which tells the
tusb1210 driver to enable charger-detection.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-5-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The quirk handling may need to set some different properties
which means using a different swnode, move the setting of the swnode
to inside dwc3_pci_quirks() so that the quirk handling can choose
a different swnode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WUSB3801 features a configurable port type, accessory detection, and
plug orientation detection. It provides a hardware "ID" pin output for
compatibility with USB 2.0 OTG PHYs. Add a typec class driver for it.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220214050118.61015-5-samuel@sholland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Basic programmable non-PD Type-C port controllers do not need the full
TCPM library, but they share the same devicetree binding and the same
typec_capability structure. Factor out a helper for parsing those
properties which map to fields in struct typec_capability, so the code
can be shared between TCPM and basic non-TCPM drivers.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220214050118.61015-4-samuel@sholland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In xhci_endpoint_{disable|reset}() the expression '&vdev->eps[ep_index]'
just cannot be NULL, so the checks have no sense at all...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220216095153.1303105-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trying to disable Link Powermanagement (LPM) before port reset is
unnecessary and can cause additional delay if host can't communicate
with the device, which is often the reason why device is reset in the
first place.
usb_disable_lpm() will
- zero usb U1/U2 timeouts for the hub downstream port
- send ENABLE U1/U2 clear feature requests to the connected device.
- increase internal reference count for udev->lpm_disable_count
There is no need to zero U1/U2 hub port timeouts, or clearing the
U1/U2 enable for the connected device before reset. These are set
to default by the reset.
USB 3.1 section 10.2.2 "HUB Downstream port U1/U2 timers" states that:
"the U1 and U2 timeout values for a downstream port reset to the default
values when the port receives a SetPortFeature request for a port reset"
Set the udev->lpm_disable_count to "1" after port reset, which is the
default lpm_disable_count value when allocating udev, representing
disabled LPM.
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220216095153.1303105-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Every lpm commmand, both for USB 2 and USB 3 devies used the same
xhci->lpm_command structure to change max exit latency.
xhci->lpm_command is only protected by a hcd->bandwidth mutex, which is
not enoungh as USB 2 and USB 3 devices are behind separate HCDs.
Simplify code and avoid unnecessary locking risks by allocating
separate command structures for each lpm command, just like with
all other commands.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220216095153.1303105-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support systems with several xhci controllers with active
dbc on each xhci we need to use IDR to identify and give
an index to each port.
Avoid using global struct tty_driver.driver_state for storing
dbc port pointer as it won't work with several dbc ports
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220216095153.1303105-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current workaround to call the dbc_tty_init() in probe is
not working in case we have several xhci devices with dbc enabled.
dbc_tty_init() should be called only once by a module init call when
module is loaded.
until dbgtty is its own module call dbc_tty_init() from xhci
module init call.
Same is true for unloading and dbc_tty_exit()
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220216095153.1303105-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These names give the impression the functions are related to
module init calls, but are in fact creating and removing the dbc
fake device
Rename them to xhci_create_dbc_dev() and xhci_remove_dbc_dev().
We will need the _init and _exit names for actual dbc module init
and exit calls.
No functional changes
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220216095153.1303105-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turn the dbgtty closer to a device driver by allocating the dbc
structure in its own xhci_dbc_tty_probe() function, and freeing it
in xhci_dbc_tty_remove()
Remove xhci_do_dbc_exit() as its no longer needed.
allocate and create the dbc strcuture in xhci_dbc_tty_probe()
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220216095153.1303105-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor xhci_dbc_init(), splitting it into logical
parts closer to the Linux device model.
- Create the fake dbc device, depends on xhci strucure
- Allocate a dbc structure, xhci agnostic
- Call xhci_dbc_tty_probe(), similar to actual probe.
Adjustments to xhci_dbc_exit and xhci_dbc_remove are also needed
as a result to the xhci_dbc_init() changes
Mostly non-functional changes, except for creating the dbc sysfs
entry earlier, together with the dbc structure.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220216095153.1303105-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CONFIG_OF maybe set, but it may not be applicable to a device. In
such case, checking against that can cause the device fail to
initialize. Check against the device node (device->of_node) instead.
Fixes: a102f07e4e ("usb: dwc3: drd: Add support for usb-conn-gpio based usb-role-switch")
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/9f15580ad5810b1e5f31c241b35ebedfbfc30a3f.1644964864.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the custom functions xhci_mtk_ldos_{enable,disable}() by
switching to using regulator_bulk to perform the very same thing,
as the regulators are always either both enabled or both disabled.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220214111905.77903-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
new high-speed USB device number ...
device descriptor read/64, error -110
Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
- usb_gadget_connect
- dwc2_hsotg_pullup
- dwc2_hsotg_core_connect
Fixes: 17f934024e ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the Bay Trail phy GPIO mappings where added cs and reset were swapped,
this did not cause any issues sofar, because sofar they were always driven
high/low at the same time.
Note the new mapping has been verified both in /sys/kernel/debug/gpio
output on Android factory images on multiple devices, as well as in
the schematics for some devices.
Fixes: 5741022cbd ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interrupt mask is enabled before any potential failure points in
the driver, which can leave a failure path where we exit with
interrupts enabled but the device not live. This causes an infinite
stream of interrupts on an Apple M1 Pro laptop on USB-C.
Add a failure label that's used post enabling interrupts, where we
mask them again before returning an error.
Suggested-by: Sven Peter <sven@svenpeter.dev>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/e6b80669-20f3-06e7-9ed5-8951a9c6db6f@kernel.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The -ENODEV return value from xhci_check_args() is incorrectly changed
to -EINVAL in a couple places before propagated further.
xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
the return value of xhci_check_args <= 0.
This causes problems for example r8152_submit_rx, calling usb_submit_urb
in drivers/net/usb/r8152.c.
r8152_submit_rx will never get -ENODEV after submiting an urb when xHC
is halted because xhci_urb_enqueue returns -EINVAL in the very beginning.
[commit message and header edit -Mathias]
Fixes: 203a86613f ("xhci: Avoid NULL pointer deref when host dies.")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When HCE(Host Controller Error) is set, it means an internal
error condition has been detected. Software needs to re-initialize
the HC, so add this check in xhci resume.
Cc: stable@vger.kernel.org
Signed-off-by: Puma Hsu <pumahsu@google.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e0082698b6 ("usb: dwc3: ulpi: conditionally resume ULPI PHY")
fixed an issue where ULPI transfers would timeout if any requests where
send to the phy sometime after init, giving it enough time to auto-suspend.
Commit e5f4ca3fce ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend
regression") changed the behavior to instead of clearing the
DWC3_GUSB2PHYCFG_SUSPHY bit, add an extra sleep when it is set.
But on Bay Trail devices, when phy_set_mode() gets called during init,
this leads to errors like these:
[ 28.451522] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a
[ 28.464089] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a
Add "snps,dis_u2_susphy_quirk" to the settings for Bay Trail devices to
fix this. This restores the old behavior for Bay Trail devices, since
previously the DWC3_GUSB2PHYCFG_SUSPHY bit would get cleared on the first
ulpi_read/_write() and then was never set again.
Fixes: e5f4ca3fce ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression")
Cc: stable@kernel.org
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original workaround was added prior to commit e4788edc73 ("USB:
EHCI: Add alias for Broadcom INSNREG"). Now that brcm_insnreg exists in
struct ehci_regs we can use that instead of having a local definition.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20220215000813.1779032-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'ret' local variables are often initialized to 0 but this value is
unused, thus we can kill those initializers...
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/901b7478-45b6-d8b3-f5c6-555712485232@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
LIST_HEAD() helps to clean up the code "struct list_head vudc_devices =",
only to care about the variable 'vudc_devices'.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220211012807.7415-1-cai.huoqing@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a debugfs file for ULPI devices which contains a dump of their
registers. This is useful for debugging basic connectivity problems. The
file is created in ulpi_register because many devices will never have a
driver bound (as they are managed in hardware by the USB controller
device).
The root directory of this subsystem is created before we register the
bus to ensure that devices can always create their directories.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220127190004.1446909-4-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Merge 5.17-rc4 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some new device ids for 5.17-rc4.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYgZ+2gAKCRALxc3C7H1l
CDoSAP9qPhQUn/i4I6ggD4oB25VaGWHxZVaoQYj/R74OjvWxDwEA0+5fIbS9T8qr
rU70IRzH4KDdW3OFPCgr58+MIotAtwc=
=1R+F
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.17-rc4
Here are some new device ids for 5.17-rc4.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cp210x: add CPI Bulk Coin Recycler id
USB: serial: cp210x: add NCR Retail IO box id
USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320
USB: serial: option: add ZTE MF286D modem
USB: serial: ch341: add support for GW Instek USB2.0-Serial devices
Add support for control peripheral of EUD (Embedded USB Debugger) to
listen to events such as USB attach/detach, pet EUD to indicate software
is functional.Reusing the platform device kobj, sysfs entry 'enable' is
created to enable or disable EUD.
To enable the eud the following needs to be done
echo 1 > /sys/bus/platform/.../enable
To disable eud, following is the command
echo 0 > /sys/bus/platform/.../enable
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Link: https://lore.kernel.org/r/0ac5c2b2c8e4ce4f4f342a08b48cfc61aeaf7ee8.1644339918.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richtek RT1719 is a sink-only Type-C PD controller it complies with
latest USB Type-C and PD standards. It integrates the physical layer of
USB power delivery protocol to allow up to 100W of power.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1644421362-32104-3-git-send-email-u0084500@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support ip-sleep wakeup for mt8195, it's a specific revision for
each USB controller, and not following IPM rule.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220128062902.26273-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DWC2 IP on the Agilex platform does not support clock-gating.
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220125161821.1951906-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the existing code code imposes a limit on the used memory, it might be
over pessimistic (even if this is unlikely).
Example scenario:
8 threads running in parallel, all entering
"usbfs_increase_memory_usage()" at the same time.
The atomic accesses in "usbfs_increase_memory_usage()" could be
serialized like this:
8 x "atomic64_add"
8 x "atomic64_read"
If the 8 x "atomic64_add" raise "usbfs_memory_usage" above the limit,
then all 8 calls of "usbfs_increase_memory_usage()" will return with
-ENOMEM. If you instead serialize over the whole access to
"usbfs_memory_usage" by using a spinlock, some of these calls will
succeed.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Link: https://lore.kernel.org/r/20220209123303.103340-2-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
new high-speed USB device number ...
device descriptor read/64, error -110
Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
- usb_gadget_connect
- dwc2_hsotg_pullup
- dwc2_hsotg_core_connect
Fixes: 17f934024e ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable@kernel.org
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check the size of the RNDIS_MSG_SET command given to us before
attempting to respond to an invalid message size.
Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stall the control endpoint in case provided index exceeds array size of
MAX_CONFIG_INTERFACES or when the retrieved function pointer is null.
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8c67d06f3f ("usb: Link the ports to the connectors they are
attached to") creates a link to the USB Type-C connector for every new
port that is added when possible. If component_add() fails,
usb_hub_create_port_device() prints a warning but does not unregister
the device and does not return errors to the callers.
Syzbot reported a "WARNING in component_del()".
Fix this issue in usb_hub_create_port_device by calling device_unregister()
and returning the errors from component_add().
Fixes: 8c67d06f3f ("usb: Link the ports to the connectors they are attached to")
Reported-and-tested-by: syzbot+60df062e1c41940cae0f@syzkaller.appspotmail.com
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20220209164500.8769-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Dmitry Torokhov