Commit Graph

691473 Commits

Author SHA1 Message Date
Linus Torvalds b5e16170f5 MTD updates for v4.13-rc1:
General updates
 
  * Cleanups and additional flash support for "dataflash" driver
  * new driver for mchp23k256 SPI SRAM device
  * improve handling of MTDs without eraseblocks (i.e., MTD_NO_ERASE)
  * refactor and improve "sub-partition" handling with TRX partition
    parser; partitions can now be created as sub-partitions of another
    partition
 
 SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
  * introduce support to the SPI 1-2-2 and 1-4-4 protocols.
  * introduce support to the Double Data Rate (DDR) mode.
  * introduce support to the Octo SPI protocols.
  * add support to new memory parts for Spansion, Macronix and Winbond.
  * add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers.
  * clean up the st_spi_fsm driver.
 
 NAND updates, from Boris Brezillon:
 
  * addition of on-die ECC support to Micron driver
  * addition of helpers to help drivers choose most appropriate ECC
    settings
  * deletion of dead-code (cached programming and ->errstat() hook)
  * make sure drivers that do not support the SET/GET FEATURES command
    return ENOTSUPP use a dummy ->set/get_features implementation
    returning -ENOTSUPP (required for Micron on-die ECC)
  * change the semantic of ecc->write_page() for drivers setting the
    NAND_ECC_CUSTOM_PAGE_ACCESS flag
  * support exiting 'GET STATUS' command in default ->cmdfunc()
    implementations
  * change the prototype of ->setup_data_interface()
 
  A bunch of driver related changes:
 
  * various cleanup, fixes and improvements of the MTK driver
  * OMAP DT bindings fixes
  * support for ->setup_data_interface() in the fsmc driver
  * support for imx7 in the gpmi driver
  * finalization of the denali driver rework (thanks to Masahiro for the
    work he's done on this driver)
  * fix "bitflips in erased pages" handling in the ifc driver
  * addition of PM ops and dynamic timing configuration to the atmel
    driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZZ7bdAAoJEFySrpd9RFgtZvIP+wfo25Lkv2gFRIFhnoDnxDfu
 1pLVL8HrgTYBcD3dmr9ghONq+bxh2SSz3gU20i/eWmOmKy1OwaGegSj88hYpGOpS
 2bwWWlczMqkX+upHw0une3ZrTb6pjoyHKHr5I5GYoJPgG2Dw2D3joehRkvMDispD
 9cEik9HkyliHXy/1mqFsToe5RwdqauLbKR/a2XZQo89gt8n8Rnlt91Q5QOZytC6r
 GLkuQzRAf4qVi4sgDb7zvFZW7KeyGTXTLDxKZGG9JETNjzcEJZMykAWxR9SwBCHa
 tL7HjyaU5d2rXo4ukZ4IplKn9Y+BneDeGomy44DcGP6RAyNDqVC/R5eFW+MtlbwY
 rm6SDxs9vCeUBrgIaJlVqDJxca/OR3ruHKILGbEfvIy/MmRQ4keBf357Dew8o4x/
 wQw2dgznn3/vs5aqSz/E+erY22gdnaHtDApaefB/D0Kqi9fs2yVaAh3gGcXmloO9
 yfRfzPugMRwI29gztMkgRWKWTCfHe2JN4hLDMVwO7Rt3ucQIbz642N/4JVMEpDcX
 gJcaSgXn/u6xRJnEX/2u+B6ERNqVvLZ8fbnfD0fkPkjLOISvfg38xti1qgoxs8z8
 tm5lMI7VR9/MKIxCXT/6Z+actDV21j/oo0QInV3YMxHDPl5KBj+migsRtDzpGhna
 dmztYIMYqF9I29skWgXR
 =ReBr
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "General updates:
   - Cleanups and additional flash support for "dataflash" driver
   - new driver for mchp23k256 SPI SRAM device
   - improve handling of MTDs without eraseblocks (i.e., MTD_NO_ERASE)
   - refactor and improve "sub-partition" handling with TRX partition
     parser; partitions can now be created as sub-partitions of another
     partition

  SPINOR updates, from Cyrille Pitchen and Marek Vasut:
   - introduce support to the SPI 1-2-2 and 1-4-4 protocols.
   - introduce support to the Double Data Rate (DDR) mode.
   - introduce support to the Octo SPI protocols.
   - add support to new memory parts for Spansion, Macronix and Winbond.
   - add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers.
   - clean up the st_spi_fsm driver.

  NAND updates, from Boris Brezillon:
   - addition of on-die ECC support to Micron driver
   - addition of helpers to help drivers choose most appropriate ECC
     settings
   - deletion of dead-code (cached programming and ->errstat() hook)
   - make sure drivers that do not support the SET/GET FEATURES command
     return ENOTSUPP use a dummy ->set/get_features implementation
     returning -ENOTSUPP (required for Micron on-die ECC)
   - change the semantic of ecc->write_page() for drivers setting the
     NAND_ECC_CUSTOM_PAGE_ACCESS flag
   - support exiting 'GET STATUS' command in default ->cmdfunc()
     implementations
   - change the prototype of ->setup_data_interface()

  A bunch of driver related changes:
   - various cleanup, fixes and improvements of the MTK driver
   - OMAP DT bindings fixes
   - support for ->setup_data_interface() in the fsmc driver
   - support for imx7 in the gpmi driver
   - finalization of the denali driver rework (thanks to Masahiro for
     the work he's done on this driver)
   - fix "bitflips in erased pages" handling in the ifc driver
   - addition of PM ops and dynamic timing configuration to the atmel
     driver"

* tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd: (118 commits)
  Documentation: ABI: mtd: describe "offset" more precisely
  mtd: Fix check in mtd_unpoint()
  mtd: nand: mtk: release lock on error path
  mtd: st_spi_fsm: remove SPINOR_OP_RDSR2 and use SPINOR_OP_RDCR instead
  mtd: spi-nor: cqspi: remove duplicate const
  mtd: spi-nor: Add support for Spansion S25FL064L
  mtd: spi-nor: Add support for mx66u51235f
  mtd: nand: mtk: add ->setup_data_interface() hook
  mtd: nand: mtk: remove unneeded mtk_ecc_hw_init from mtk_ecc_resume
  mtd: nand: mtk: remove unneeded mtk_nfc_hw_init from mtk_nfc_resume
  mtd: nand: mtk: disable ecc irq when writing page with hwecc
  mtd: nand: mtk: fix incorrect register setting order about ecc irq
  mtd: partitions: fixup some allocate_partition() whitespace
  mtd: parsers: trx: fix pr_err format for printing offset
  MAINTAINERS: Update SPI NOR subsystem git repositories
  mtd: extract TRX parser out of bcm47xxpart into a separated module
  mtd: partitions: add support for partition parsers
  mtd: partitions: add support for subpartitions
  mtd: partitions: rename "master" to the "parent" where appropriate
  mtd: partitions: remove sysfs files when deleting all master's partitions
  ...
2017-07-13 12:07:44 -07:00
Linus Torvalds da16dd9785 fbdev changes for v4.13:
- fix get_fb_unmapped_area() helper handling (Benjamin Gaignard)
 - check return value of clk_prepare_enable() in pxafb driver (Arvind Yadav)
 - fix error path handling in vmlfb driver (Alexey Khoroshilov)
 - printks fixes/cleanups for uvesafb driver (Joe Perches)
 - fix unusued variable warning in atyfb driver (Arnd Bergmann)
 - constifications for sh_mobile_lcdcfb, fsl-diu-fb, omapfb (Arvind Yadav)
 - mdacon driver cleanups (Jiri Slaby)
 - misc cleanups
   (Andy Shevchenko, Karim Eshapa, Gustavo A. R. Silva, Dan Carpenter)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJZZ1jkAAoJEH4ztj+gR8ILXRsP/RGy2Vs3N3h9TQEaNRgm/en9
 fqeufaKinwqCCSfQ3NoY4ZZbGNUchmeebX6kVRJBu5I16diuYFEWtn+O+yXpe8d3
 4EMg1FQrcwSizwX6TT/SBQ5ndddVurugrVRdSeiWzXMLgQuqksgef5rSzje4yZb1
 UmFuc8I6DpB2rIiUV2nvp8gCf7AfEjLqggUJN45qAh5MS4HWdkvv+X0v5lqBSxJK
 iLc/4RY7LqgsK4d8xFVBzxwQbeUyJzTcdORRgo9N5b/hzQkTlVjPYNcI3ZF8JgzZ
 Y6+98OJDvCuHVrT6eyunFchegMlQ7zMKbFMND/xTFDLsSmD2NVu5dKf8nv6AYG0M
 67xpsn5JOMqcWkWY+p0kAswCepmyffpENd0/fUjVY5VbycCHO3pt6J1aXu88544I
 mHI40nVn7k1Gi0gcEu4m93r21H8zewJGSPlTt/6YPDkqgsCmbiIXkFRyl8CUIxxR
 kuqbpRL6ObRDirSJxULj4O3BTxL3Kez1KjFbtjwUMr9lb4w9NmZzz0sRZ4L6SI1/
 kxxWBRGl3G+YGRhBX/T+ykzKloFR+4RdCuEgPk+Kfd9eaSlg927yOniloNFCrUOs
 GVNIhh9PCbGDnRs8sHoRC/xmyc3TFvJ6WrAq44WwxLoDDt6XLqRu2yoGHWwinCB1
 YzWi9TfzunZQ6pD+4uqb
 =icOY
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-v4.13' of git://github.com/bzolnier/linux

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here, just a couple of small bugfixes,
  improvements and cleanups.

   - fix get_fb_unmapped_area() helper handling (Benjamin Gaignard)

   - check return value of clk_prepare_enable() in pxafb driver (Arvind
     Yadav)

   - fix error path handling in vmlfb driver (Alexey Khoroshilov)

   - printks fixes/cleanups for uvesafb driver (Joe Perches)

   - fix unusued variable warning in atyfb driver (Arnd Bergmann)

   - constifications for sh_mobile_lcdcfb, fsl-diu-fb, omapfb (Arvind
     Yadav)

   - mdacon driver cleanups (Jiri Slaby)

   - misc cleanups (Andy Shevchenko, Karim Eshapa, Gustavo A. R. Silva,
     Dan Carpenter)"

* tag 'fbdev-v4.13' of git://github.com/bzolnier/linux:
  fbdev: make get_fb_unmapped_area depends of !MMU
  atyfb: hide unused variable
  video: fbdev: matrox: the list iterator can't be NULL
  video: fbdev: aty: remove useless variable assignments in aty_var_to_crtc()
  fbdev: omapfb: constify ctrl_caps, color_caps, panel_attr_grp and ctrl_attr_grp
  omapfb: panel-dsi-cm: constify dsicm_attr_group
  vmlfb: Fix error handling in cr_pll_init()
  video: fbdev: fsl-diu-fb: constify mfb_template and fsl_diu_match.
  uvesafb: Fix continuation printks without KERN_LEVEL to pr_cont, neatening
  video: fbdev: sh_mobile_lcdcfb: constify sh_mobile_lcdc_bl_ops.
  omapfb: Use sysfs_match_string() helper
  video: fbdev: pxafb: Handle return value of clk_prepare_enable
  video: fbdev: omap2: omapfb: displays: panel-dsi-cm: Use time comparison kernel macro.
  mdacon: replace MDA_ADDR macro by inline function
  mdacon: make mda_vram_base u16 *
  mdacon: align code in mda_detect properly
2017-07-13 11:52:00 -07:00
Linus Torvalds 38f7d2da4e pwm: Changes for v4.13-rc1
This release cycle's changes include mostly updates and cleanups to
 existing drivers along with a few cleanups to the core, documentation
 and device tree bindings.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAllnboQZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zocCFD/9kUnHzwyM3epnGQruCwgLI
 xwcZmk2vAImbLoMN0NwtLpKyxIxehDCjvgsRxAm5ggE7Whs2Wzs1tzdML863umdl
 DcfF46T+zHlUXNZMgES+Znp787G6Bqnjj35PNVqNneptukmrZakPMQ4nZkL0UidD
 dZnXs/KhK97G4ys00+uVSfS/x6Ck1oD9XUtJttSGx4f7wIhWcsiwUpJvi772jcG+
 bVmVkbJsOnui4UdvUs1uCb5yOppzOJqwsuNCAyX9a3NKR6u3/RtETjo4DQHhqXrv
 mXoHEIZkljDOgni2Zu/kcUDjooQ/GJVLjwku2iq1UGmJTu6FOJKqSLBKGQzyCXs+
 BN0JM7pwEwwGKFzKbNn/ZxpJD06Hk0ABWcjeObIgsZaUOGmUdiDzwpFmLtKK22TC
 9zNEODo+OjuaNYKADa4RHZrDbujiPMCL9ezonO3Xb1AS9UQfR8wXsVFqR44EofQA
 0x+q+yIS5GVMab6s/jN51G/RVW2Ao+SdT+0/F8QF8N3YlCFsFCwt+X96383oDPAj
 STiHxqIRzEkn44Ua9CFg9utTrQeUVtNB3tw0wnD+zgsMFH1YRzcU2p714viqN8tQ
 N0yJUi+VwHXxnfNiVZNdrgidRH7ETWXyJY/OFRt2BCq9VuZ8V3E/Dr41pgFxZ0e6
 WP7awOH/n25e4L09CjRtng==
 =ioFX
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This release cycle's changes include mostly updates and cleanups to
  existing drivers along with a few cleanups to the core, documentation
  and device tree bindings"

* tag 'pwm/for-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: cros-ec: Fix transposed param settings
  pwm: meson: Improve PWM calculation precision
  dt-bindings: pwm: meson: Add compatible for gxbb ao PWMs
  pwm: meson: Add compatible for the gxbb ao PWMs
  pwm: sun4i: Drop legacy callbacks
  pwm: sun4i: Switch to atomic PWM
  pwm: sun4i: Improve hardware read out
  pwm: hibvt: Constify hibvt_pwm_ops
  pwm: Silently error out on EPROBE_DEFER
  pwm: Standardize document format
  pwm: bfin: Remove unneeded error message
  dt-bindings: pwm: Update STM32 timers clock names
  dt-bindings: pwm: Add R-Car M3-W device tree bindings
  pwm: tegra: Set maximum pwm clock source per SoC tapeout
2017-07-13 11:49:52 -07:00
Linus Torvalds dc087d1ef1 power supply and reset changes for the v4.13 series (part 2)
* two fixes for twl4030-charger
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAllmp2IACgkQ2O7X88g7
 +pqgXRAAg9kBJUYoTmLOg67L8HpnUuiPuy4Mp0oceQQYbDSRTaaQKN7d4m3+6k3H
 SV0Z84CH3GfgZDaSCAxPT84/gsiFsBSxKvvQ/X9DxitdULj5KehS9IYok0p+83RU
 BL6St1gZcJiM2GAip81+IMn9MVGyvr6hxY0sme6nsvXRg8BT7aSk8eC/2pESuoo/
 MGpgPCJrYPtPNPDYTGrD1rgW+0zWxkBITOvjvRAXm3fvdN42yFf4FfhK5XvjjQwA
 /wO3TgGOVa+ibUMoPnnlqIvZq7SqyeiPsE+/Et4/7/EKpVmuNelZtouKS2T+gy+J
 lxLIMxlB+AIY2gQDVczHrewIQG342hVCwQWAJkp9ifC/a76iAK7mmdLPXZqEs9AT
 qvaaL+sUxmYgPslXj+L6h78NRjRordYA5z0d6CLBzKDln4BNsGq3EvAEYKlhIL+r
 V5lJu+wPv75Y8HEsfcrLmLztojxjjjdqiSjO828ZR1Y+qEK0qJMEoSfGPdIFKzd5
 0it1eqceye4VOBQ/1au+aPkTdO48/4nfAlPwxtY7UzKtLfulLhUJbWxbFXVrvLWs
 vSZ9Tp8W6QdulGSseBu6BtT2ogmHbNEjl2e0CWpScj6hZwCvTXZdrnELJ/HpNu/f
 j5Ul6BhCM5EJMux9ahP67YH9CyGi60x1P9vItkFp75kjU3tOU6Y=
 =shuZ
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply fixes from  Reichel:
 "I have two more fixes for the power-supply subsystem:

   - two fixes for twl4030-charger"

* tag 'for-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: twl4030-charger: add deferred probing for phy and iio
  power: supply: twl4030-charger: move irq allocation to just before irqs are enabled
2017-07-13 11:47:59 -07:00
Linus Torvalds 311ac00def i915, amd and some core fixes + mediatek color support
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZZvUdAAoJEAx081l5xIa+ZHQP/iFMSmu1H78hZ3amygQnCkyr
 NSeeym+z2Aj4MADXjMM6mEmLxSAR3xzMeqD4yJjZTYcOiLoK2FI2t1yo216LVNm0
 U4Ws5u1tLTBgr/tYSwCbAOsr1s4e7YvS4FdpK3echcTKp10TBSu3wd4utTidQAit
 Q7h2+mnoj92WbBdbIcydIHpg931xbmEyRQIuOJuIAuYdG3iGlflQ1EsUAuozV8Hn
 z9S93IwtTeDZMYEjQcCJFpGrnUzHP/oi2WatW6c8GXwykuI7e9px9KmxqO/kWibV
 JfrVuDZFJKVyBga7cc3xHf8zmvnzsv0QhZBPb9hOGuH093RkUlF2Q6fswnvy9MPU
 Ym1t/sb8kgF0tgPBxTt3F6m5mFSi/Rz9WTof8y/y4bN3z2LCCsv65VWaqpZUvnGD
 x6my5wgCgXRNHxK031lMNOLItv2rg4rbkJcL+VE1No2TjbnjZxcFgMdihwCyrkYk
 B1oeFUZk+oDS4ho0dL0LZr9OJkvF/X4yF0Ubx/CjYf5lTRr1Gtaha+qyaSqTbcEO
 qm+aprNTm8QPKx9ZAVOZObEj7bt3R0r4HzxUTTy5VyYJqNx6NySINIoMgEi/e/wc
 ScJVzI2EKmQh8xVtEle5wGz1gMGZMHj5Q/v/r1fkjXf07R931im+w3lxif4I5K1e
 TOvgMJ2rBgYXQ55lssN/
 =TGAC
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-for-v4.13-rc1' of git://people.freedesktop.org/~airlied/linux

Pull more drm updates from Dave Airlie:
 "i915, amd and some core fixes + mediatek color support.

  Some fixes tree came in since the main pull request for rc1, primarily
  i915 and drm-misc and one amd fix. The drm core vblank regression fix
  is probably the most important thing.

  I've also added the mediatek feature pull, it wasn't that big and
  didn't look like it would have any impact outside of mediatek, in fact
  it looks to just be a single feature, and some cleanups"

* tag 'drm-fixes-for-v4.13-rc1' of git://people.freedesktop.org/~airlied/linux: (31 commits)
  drm/i915: Make DP-MST connector info work
  drm/i915/gvt: Use fence error from GVT request for workload status
  drm/i915/gvt: remove scheduler_mutex in per-engine workload_thread
  drm/i915/gvt: Revert "drm/i915/gvt: Fix possible recursive locking issue"
  drm/i915/gvt: Audit the command buffer address
  drm/i915/gvt: Fix a memory leak in intel_gvt_init_gtt()
  drm/rockchip: fix NULL check on devm_kzalloc() return value
  drm/i915/fbdev: Check for existence of ifbdev->vma before operations
  drm/radeon: Fix eDP for single-display iMac10,1 (v2)
  drm/i915: Hold RPM wakelock while initializing OA buffer
  drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
  drm/i915/cfl: Fix Workarounds.
  drm/i915: Avoid undefined behaviour of "u32 >> 32"
  drm/i915: reintroduce VLV/CHV PFI programming power domain workaround
  drm/i915: Fix an error checking test
  drm/i915: Disable MSI for all pre-gen5
  drm/atomic: Add missing drm_atomic_state_clear to atomic_remove_fb
  drm: vblank: Fix vblank timestamp update
  drm/i915/gvt: Make function dpy_reg_mmio_readx safe
  drm/mediatek: separate color module to fixup error memory reallocation
  ...
2017-07-13 11:26:18 -07:00
Filipe Manana 6592e58c6b Btrfs: fix write corruption due to bio cloning on raid5/6
The recent changes to make bio cloning faster (added in the 4.13 merge
window) by using the bio_clone_fast() API introduced a regression on
raid5/6 modes, because cloned bios have an invalid bi_vcnt field
(therefore it can not be used) and the raid5/6 code uses the
bio_for_each_segment_all() API to iterate the segments of a bio, and this
API uses a bio's bi_vcnt field.

The issue is very simple to trigger by doing for example a direct IO write
against a raid5 or raid6 filesystem and then attempting to read what we
wrote before:

  $ mkfs.btrfs -m raid5 -d raid5 -f /dev/sdc /dev/sdd /dev/sde /dev/sdf
  $ mount /dev/sdc /mnt
  $ xfs_io -f -d -c "pwrite -S 0xab 0 1M" /mnt/foobar
  $ od -t x1 /mnt/foobar
  od: /mnt/foobar: read error: Input/output error

For that example, the following is also reported in dmesg/syslog:

  [18274.985557] btrfs_print_data_csum_error: 18 callbacks suppressed
  [18274.995277] BTRFS warning (device sdf): csum failed root 5 ino 257 off 0 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18274.997205] BTRFS warning (device sdf): csum failed root 5 ino 257 off 4096 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.025221] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.047422] BTRFS warning (device sdf): csum failed root 5 ino 257 off 12288 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.054818] BTRFS warning (device sdf): csum failed root 5 ino 257 off 4096 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.054834] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.054943] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 2
  [18275.055207] BTRFS warning (device sdf): csum failed root 5 ino 257 off 8192 csum 0x98f94189 expected csum 0x94374193 mirror 3
  [18275.055571] BTRFS warning (device sdf): csum failed root 5 ino 257 off 0 csum 0x98f94189 expected csum 0x94374193 mirror 1
  [18275.062171] BTRFS warning (device sdf): csum failed root 5 ino 257 off 12288 csum 0x98f94189 expected csum 0x94374193 mirror 1

A scrub will also fail correcting bad copies, mentioning the following in
dmesg/syslog:

  [18276.128696] scrub_handle_errored_block: 498 callbacks suppressed
  [18276.129617] BTRFS warning (device sdf): checksum error at logical 2186346496 on dev /dev/sde, sector 2116608, root 5, inode 257, offset 65536, length 4096, links $
  [18276.149235] btrfs_dev_stat_print_on_error: 498 callbacks suppressed
  [18276.157897] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
  [18276.206059] BTRFS warning (device sdf): checksum error at logical 2186477568 on dev /dev/sdd, sector 2116736, root 5, inode 257, offset 196608, length 4096, links$
  [18276.206059] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
  [18276.306552] BTRFS warning (device sdf): checksum error at logical 2186543104 on dev /dev/sdd, sector 2116864, root 5, inode 257, offset 262144, length 4096, links$
  [18276.319152] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
  [18276.394316] BTRFS warning (device sdf): checksum error at logical 2186739712 on dev /dev/sdf, sector 2116992, root 5, inode 257, offset 458752, length 4096, links$
  [18276.396348] BTRFS error (device sdf): bdev /dev/sdf errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
  [18276.434127] BTRFS warning (device sdf): checksum error at logical 2186870784 on dev /dev/sde, sector 2117120, root 5, inode 257, offset 589824, length 4096, links$
  [18276.434127] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
  [18276.500504] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186477568 on dev /dev/sdd
  [18276.538400] BTRFS warning (device sdf): checksum error at logical 2186481664 on dev /dev/sdd, sector 2116744, root 5, inode 257, offset 200704, length 4096, links$
  [18276.540452] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 3, gen 0
  [18276.542012] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186481664 on dev /dev/sdd
  [18276.585030] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186346496 on dev /dev/sde
  [18276.598306] BTRFS warning (device sdf): checksum error at logical 2186412032 on dev /dev/sde, sector 2116736, root 5, inode 257, offset 131072, length 4096, links$
  [18276.598310] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 3, gen 0
  [18276.598582] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186350592 on dev /dev/sde
  [18276.603455] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 4, gen 0
  [18276.638362] BTRFS warning (device sdf): checksum error at logical 2186354688 on dev /dev/sde, sector 2116624, root 5, inode 257, offset 73728, length 4096, links $
  [18276.640445] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 5, gen 0
  [18276.645942] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186354688 on dev /dev/sde
  [18276.657204] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186412032 on dev /dev/sde
  [18276.660563] BTRFS warning (device sdf): checksum error at logical 2186416128 on dev /dev/sde, sector 2116744, root 5, inode 257, offset 135168, length 4096, links$
  [18276.664609] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 6, gen 0
  [18276.664609] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186358784 on dev /dev/sde

So fix this by using the bio_for_each_segment() API and setting before
the bio's bi_iter field to the value of the corresponding btrfs bio
container's saved iterator if we are processing a cloned bio in the
raid5/6 code (the same code processes both cloned and non-cloned bios).

This incorrect iteration of cloned bios was also causing some occasional
BUG_ONs when running fstest btrfs/064, which have a trace like the
following:

  [ 6674.416156] ------------[ cut here ]------------
  [ 6674.416157] kernel BUG at fs/btrfs/raid56.c:1897!
  [ 6674.416159] invalid opcode: 0000 [#1] PREEMPT SMP
  [ 6674.416160] Modules linked in: dm_flakey dm_mod dax ppdev tpm_tis parport_pc tpm_tis_core evdev tpm psmouse sg i2c_piix4 pcspkr parport i2c_core serio_raw button s
  [ 6674.416184] CPU: 3 PID: 19236 Comm: kworker/u32:10 Not tainted 4.12.0-rc6-btrfs-next-44+ #1
  [ 6674.416185] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
  [ 6674.416210] Workqueue: btrfs-endio btrfs_endio_helper [btrfs]
  [ 6674.416211] task: ffff880147f6c740 task.stack: ffffc90001fb8000
  [ 6674.416229] RIP: 0010:__raid_recover_end_io+0x1ac/0x370 [btrfs]
  [ 6674.416230] RSP: 0018:ffffc90001fbbb90 EFLAGS: 00010217
  [ 6674.416231] RAX: ffff8801ff4b4f00 RBX: 0000000000000002 RCX: 0000000000000001
  [ 6674.416232] RDX: ffff880099b045d8 RSI: ffffffff81a5f6e0 RDI: 0000000000000004
  [ 6674.416232] RBP: ffffc90001fbbbc8 R08: 0000000000000001 R09: 0000000000000001
  [ 6674.416233] R10: ffffc90001fbbac8 R11: 0000000000001000 R12: 0000000000000002
  [ 6674.416234] R13: ffff880099b045c0 R14: 0000000000000004 R15: ffff88012bff2000
  [ 6674.416235] FS:  0000000000000000(0000) GS:ffff88023f2c0000(0000) knlGS:0000000000000000
  [ 6674.416235] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 6674.416236] CR2: 00007f28cf282000 CR3: 00000001000c6000 CR4: 00000000000006e0
  [ 6674.416239] Call Trace:
  [ 6674.416259]  __raid56_parity_recover+0xfc/0x16e [btrfs]
  [ 6674.416276]  raid56_parity_recover+0x157/0x16b [btrfs]
  [ 6674.416293]  btrfs_map_bio+0xe0/0x259 [btrfs]
  [ 6674.416310]  btrfs_submit_bio_hook+0xbf/0x147 [btrfs]
  [ 6674.416327]  end_bio_extent_readpage+0x27b/0x4a0 [btrfs]
  [ 6674.416331]  bio_endio+0x17d/0x1b3
  [ 6674.416346]  end_workqueue_fn+0x3c/0x3f [btrfs]
  [ 6674.416362]  btrfs_scrubparity_helper+0x1aa/0x3b8 [btrfs]
  [ 6674.416379]  btrfs_endio_helper+0xe/0x10 [btrfs]
  [ 6674.416381]  process_one_work+0x276/0x4b6
  [ 6674.416384]  worker_thread+0x1ac/0x266
  [ 6674.416386]  ? rescuer_thread+0x278/0x278
  [ 6674.416387]  kthread+0x106/0x10e
  [ 6674.416389]  ? __list_del_entry+0x22/0x22
  [ 6674.416391]  ret_from_fork+0x27/0x40
  [ 6674.416395] Code: 44 89 e2 be 00 10 00 00 ff 15 b0 ab ef ff eb 72 4d 89 e8 89 d9 44 89 e2 be 00 10 00 00 ff 15 a3 ab ef ff eb 5d 41 83 fc ff 74 02 <0f> 0b 49 63 97
  [ 6674.416432] RIP: __raid_recover_end_io+0x1ac/0x370 [btrfs] RSP: ffffc90001fbbb90
  [ 6674.416434] ---[ end trace 74d56ebe7489dd6a ]---

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2017-07-13 19:26:01 +01:00
Jeffy Chen 266530b34c drm: Add missing field copy in compat_drm_version
DRM_IOCTL_VERSION is supposed to update the name_len/date_len/desc_len
fields to user.

Fixes: 012c6741c6 ("switch compat_drm_version() to drm_ioctl_kernel()")
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13 11:25:04 -07:00
Colin Ian King b20dae70bf svcrdma: fix an incorrect check on -E2BIG and -EINVAL
The current check will always be true and will always jump to
err1, this looks dubious to me. I believe && should be used
instead of ||.

Detected by CoverityScan, CID#1450120 ("Logically Dead Code")

Fixes: 107c1d0a99 ("svcrdma: Avoid Send Queue overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-07-13 14:18:47 -04:00
Rafał Miłecki 7d84120b5b Documentation: ABI: mtd: describe "offset" more precisely
So far Linux supported only two levels of MTD devices so we didn't need
a very precise description for this sysfs file. With commit
97519dc52b ("mtd: partitions: add support for subpartitions") there
is support for a tree structure so we should have more precise
description. Using "parent" and "flash device" makes it more accurate.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-07-13 10:54:45 -07:00
David Howells fdb254db21 isofs: Fix isofs_show_options()
The isofs patch needs a small fix to handle a signed/unsigned comparison that
the compiler didn't flag - thanks to Dan for catching it.

It should be noted, however, the session number handing appears to be incorrect
between where it is parsed and where it is used.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-13 12:30:43 -04:00
Roman Kagan efc479e690 kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2
There is a flaw in the Hyper-V SynIC implementation in KVM: when message
page or event flags page is enabled by setting the corresponding msr,
KVM zeroes it out.  This is problematic because on migration the
corresponding MSRs are loaded on the destination, so the content of
those pages is lost.

This went unnoticed so far because the only user of those pages was
in-KVM hyperv synic timers, which could continue working despite that
zeroing.

Newer QEMU uses those pages for Hyper-V VMBus implementation, and
zeroing them breaks the migration.

Besides, in newer QEMU the content of those pages is fully managed by
QEMU, so zeroing them is undesirable even when writing the MSRs from the
guest side.

To support this new scheme, introduce a new capability,
KVM_CAP_HYPERV_SYNIC2, which, when enabled, makes sure that the synic
pages aren't zeroed out in KVM.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-13 17:41:04 +02:00
Ladi Prosek a826faf108 KVM: x86: make backwards_tsc_observed a per-VM variable
The backwards_tsc_observed global introduced in commit 16a9602 is never
reset to false. If a VM happens to be running while the host is suspended
(a common source of the TSC jumping backwards), master clock will never
be enabled again for any VM. In contrast, if no VM is running while the
host is suspended, master clock is unaffected. This is inconsistent and
unnecessarily strict. Let's track the backwards_tsc_observed variable
separately and let each VM start with a clean slate.

Real world impact: My Windows VMs get slower after my laptop undergoes a
suspend/resume cycle. The only way to get the perf back is unloading and
reloading the kvm module.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-13 17:25:39 +02:00
Ernesto A. Fernández 4d9bcaddac ext2: Fix memory leak when truncate races ext2_get_blocks
Buffer heads referencing indirect blocks may not be released if the file
is truncated at the right time. This happens because ext2_get_branch()
returns NULL when it finds the whole chain of indirect blocks already
set, and when truncate alters the chain this value of NULL is
treated as the address of the last head to be released. Handle this in the
same way as it's done after the got_it label.

Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2017-07-13 13:45:08 +02:00
Chris Brandt 9c284c41c0 mmc: tmio-mmc: fix bad pointer math
The existing code gives an incorrect pointer value.
The buffer pointer 'buf' was of type unsigned short *, and 'count' was a
number in bytes. A cast of buf should have been used.

However, instead of casting, just change the code to use u32 pointers.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 8185e51f358a: ("mmc: tmio-mmc: add support for 32bit data port")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-07-13 11:56:35 +02:00
Grzegorz Sluja bbdc74dc19 mmc: block: Prevent new req entering queue after its cleanup
The commit 304419d8a7 ("mmc: core: Allocate per-request data using the
block layer core"), refactored the mechanism of queue handling, but also
made mmc_init_request() to be called after mmc_cleanup_queue(). This
triggers a null pointer dereference:

[  683.123791] BUG: unable to handle kernel NULL pointer dereference at (null)
[  683.123801] IP: mmc_init_request+0x2c/0xf0 [mmc_block]
...
[  683.123905] Call Trace:
[  683.123913]  alloc_request_size+0x4f/0x70
[  683.123919]  mempool_alloc+0x5f/0x150
[  683.123925]  ? __enqueue_entity+0x6c/0x70
[  683.123928]  get_request+0x3ad/0x720
[  683.123933]  ? prepare_to_wait_event+0x110/0x110
[  683.123937]  blk_queue_bio+0xc1/0x3a0
[  683.123940]  generic_make_request+0xf8/0x2a0
[  683.123942]  submit_bio+0x75/0x150
[  683.123947]  submit_bio_wait+0x51/0x70
[  683.123951]  blkdev_issue_flush+0x5c/0x90
[  683.123956]  ext4_sync_fs+0x171/0x1b0
[  683.123961]  sync_filesystem+0x73/0x90
[  683.123965]  fsync_bdev+0x24/0x50
[  683.123971]  invalidate_partition+0x24/0x50
[  683.123973]  del_gendisk+0xb2/0x2a0
[  683.123977]  mmc_blk_remove_req.part.38+0x71/0xa0 [mmc_block]
[  683.123980]  mmc_blk_remove+0xba/0x190 [mmc_block]
[  683.123990]  mmc_bus_remove+0x1a/0x20 [mmc_core]
[  683.123995]  device_release_driver_internal+0x141/0x200
[  683.123999]  device_release_driver+0x12/0x20
[  683.124001]  bus_remove_device+0xfd/0x170
[  683.124004]  device_del+0x1e8/0x330
[  683.124012]  mmc_remove_card+0x60/0xc0 [mmc_core]
[  683.124019]  mmc_remove+0x19/0x30 [mmc_core]
[  683.124025]  mmc_stop_host+0xfb/0x1a0 [mmc_core]
[  683.124032]  mmc_remove_host+0x1a/0x40 [mmc_core]
[  683.124037]  sdhci_remove_host+0x2e/0x1c0 [mmc_sdhci]
[  683.124042]  sdhci_pci_remove_slot+0x3f/0x80 [sdhci_pci]
[  683.124045]  sdhci_pci_remove+0x39/0x70 [sdhci_pci]
[  683.124049]  pci_device_remove+0x39/0xc0
[  683.124052]  device_release_driver_internal+0x141/0x200
[  683.124056]  driver_detach+0x3f/0x80
[  683.124059]  bus_remove_driver+0x55/0xd0
[  683.124062]  driver_unregister+0x2c/0x50
[  683.124065]  pci_unregister_driver+0x29/0x90
[  683.124069]  sdhci_driver_exit+0x10/0x4f3 [sdhci_pci]
[  683.124073]  SyS_delete_module+0x171/0x250
[  683.124078]  entry_SYSCALL_64_fastpath+0x1e/0xa9

Fix this by setting the queue DYING flag before cleanup the queue, as it
prevents new reqs from entering the queue.

Signed-off-by: Grzegorz Sluja <grzegorzx.sluja@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 304419d8a7 ("mmc: core: Allocate per-request data using the...")
[Ulf: Updated the changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-07-13 11:44:01 +02:00
Bjorn Andersson 3c48d86cc9 clk: Provide bulk prepare_enable disable_unprepare variants
This extends the existing set of bulk helpers with prepare_enable and
disable_unprepare variants.

Cc: Russell King <linux@armlinux.org.uk>,
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-12 23:50:53 -07:00
Dave Airlie 6419ec78c6 Merge branch 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux into drm-next
single r700 fix.
* 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: Fix eDP for single-display iMac10,1 (v2)
2017-07-13 13:38:22 +10:00
Linus Torvalds 4ca6df1348 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull sysctl fix from Eric Biederman:
 "A rather embarassing and hard to hit bug was merged into 4.11-rc1.

  Andrei Vagin tracked this bug now and after some staring at the code
  I came up with a fix"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Fix proc_sys_prune_dcache to hold a sb reference
2017-07-12 19:43:20 -07:00
Linus Torvalds edaf382518 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

1) Fix 64-bit division in mlx5 IPSEC offload support, from Ilan Tayari
   and Arnd Bergmann.

2) Fix race in statistics gathering in bnxt_en driver, from Michael
   Chan.

3) Can't use a mutex in RCU reader protected section on tap driver, from
   Cong WANG.

4) Fix mdb leak in bridging code, from Eduardo Valentin.

5) Fix free of wrong pointer variable in nfp driver, from Dan Carpenter.

6) Buffer overflow in brcmfmac driver, from Arend van SPriel.

7) ioremap_nocache() return value needs to be checked in smsc911x
   driver, from Alexey Khoroshilov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits)
  net: stmmac: revert "support future possible different internal phy mode"
  sfc: don't read beyond unicast address list
  datagram: fix kernel-doc comments
  socket: add documentation for missing elements
  smsc911x: Add check for ioremap_nocache() return code
  brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()
  net: hns: Bugfix for Tx timeout handling in hns driver
  net: ipmr: ipmr_get_table() returns NULL
  nfp: freeing the wrong variable
  mlxsw: spectrum_switchdev: Check status of memory allocation
  mlxsw: spectrum_switchdev: Remove unused variable
  mlxsw: spectrum_router: Fix use-after-free in route replace
  mlxsw: spectrum_router: Add missing rollback
  samples/bpf: fix a build issue
  bridge: mdb: fix leak on complete_info ptr on fail path
  tap: convert a mutex to a spinlock
  cxgb4: fix BUG() on interrupt deallocating path of ULD
  qed: Fix printk option passed when printing ipv6 addresses
  net: Fix minor code bug in timestamping.txt
  net: stmmac: Make 'alloc_dma_[rt]x_desc_resources()' look even closer
  ...
2017-07-12 19:30:57 -07:00
Linus Torvalds bd664f6b3e disable new gcc-7.1.1 warnings for now
I made the mistake of upgrading my desktop to the new Fedora 26 that
comes with gcc-7.1.1.

There's nothing wrong per se that I've noticed, but I now have 1500
lines of warnings, mostly from the new format-truncation warning
triggering all over the tree.

We use 'snprintf()' and friends in a lot of places, and often know that
the numbers are fairly small (ie a controller index or similar), but gcc
doesn't know that, and sees an 'int', and thinks that it could be some
huge number.  And then complains when our buffers are not able to fit
the name for the ten millionth controller.

These warnings aren't necessarily bad per se, and we probably want to
look through them subsystem by subsystem, but at least during the merge
window they just mean that I can't even see if somebody is introducing
any *real* problems when I pull.

So warnings disabled for now.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 19:25:47 -07:00
Dave Airlie 0355e22a4b Merge tag 'drm-misc-next-fixes-2017-07-10' of git://anongit.freedesktop.org/git/drm-misc into drm-next
Core Changes:
- Fix empty timestamps on hw without vlbank counter (Laurent)
- Clear atomic state before retrying ww/mutex acquisition in remove_fb (Maarten)

Driver Changes:
- rockchip: Fix incorrect NULL pointer check after allocation (Gustavo)

Cc: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

* tag 'drm-misc-next-fixes-2017-07-10' of git://anongit.freedesktop.org/git/drm-misc:
  drm/rockchip: fix NULL check on devm_kzalloc() return value
  drm/atomic: Add missing drm_atomic_state_clear to atomic_remove_fb
  drm: vblank: Fix vblank timestamp update
  DRM: Fix an incorrectly formatted table
  bridge: Fix panel-bridge error return on !panel.
  drm/rockchip: gem: add the lacks lock and trivial changes
2017-07-13 11:22:34 +10:00
Dave Airlie caa164e373 Merge tag 'drm-intel-next-fixes-2017-07-11' of git://anongit.freedesktop.org/git/drm-intel into drm-next
drm/i915 fixes for v4.13-rc1

* tag 'drm-intel-next-fixes-2017-07-11' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Make DP-MST connector info work
  drm/i915/gvt: Use fence error from GVT request for workload status
  drm/i915/gvt: remove scheduler_mutex in per-engine workload_thread
  drm/i915/gvt: Revert "drm/i915/gvt: Fix possible recursive locking issue"
  drm/i915/gvt: Audit the command buffer address
  drm/i915/gvt: Fix a memory leak in intel_gvt_init_gtt()
  drm/i915/fbdev: Check for existence of ifbdev->vma before operations
  drm/i915: Hold RPM wakelock while initializing OA buffer
  drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
  drm/i915/cfl: Fix Workarounds.
  drm/i915: Avoid undefined behaviour of "u32 >> 32"
  drm/i915: reintroduce VLV/CHV PFI programming power domain workaround
  drm/i915: Fix an error checking test
  drm/i915: Disable MSI for all pre-gen5
  drm/i915/gvt: Make function dpy_reg_mmio_readx safe
  drm/i915/gvt: Don't read ADPA_CRT_HOTPLUG_MONITOR from host
  drm/i915/gvt: Set initial PORT_CLK_SEL vreg for BDW
  drm/i915/gvt: Fix inconsistent locks holding sequence
  drm/i915/gvt: Fix possible recursive locking issue
2017-07-13 11:21:16 +10:00
Dave Airlie 39bf0bff4f Merge branch 'mediatek-drm-next-4.13' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
This include new color format support and some fixups.

* 'mediatek-drm-next-4.13' of https://github.com/ckhu-mediatek/linux.git-tags:
  drm/mediatek: separate color module to fixup error memory reallocation
  drm/mediatek: check for memory allocation failure
  drm/mediatek: re-phrase DRM_INFO error message
  drm/mediatek: use platform_register_drivers
  drm/mediatek: Support UYVY and YUYV format for overlay
2017-07-13 11:00:20 +10:00
Linus Torvalds 3a75ad1457 Modules updates for v4.13
Summary of modules changes for the 4.13 merge window:
 
 - Minor code cleanups
 
 - Avoid accessing mod struct prior to checking module struct version, from Kees
 
 - Fix racy atomic inc/dec logic of kmod_concurrent_max in kmod, from Luis
 
 Signed-off-by: Jessica Yu <jeyu@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJZZp4WAAoJEMBFfjjOO8Fy5JkQAIYujpi6ZS7pGpNCXnGa8pnQ
 E62oLWAM3UndSgzkL6KJ8HXUzc26Wvm56hoF+k/bvQ7fq0qUmMF71yQ7mArzTZEW
 QW4t7Fu6zTUh4l5hGenoz1ShJbi+rB/pQT8l6AgdCSEZjpcCoWv+sdb93qoT3YO8
 /5pugAR2Uid1yb6EVDzItB/tz5w9Vyojp/fePkcz7M0sAI3NCa/0zeWtYgJbXpTW
 atieqPM8icfP8LNBYaXmA1SowMkW9cIh8AGhBIbvUYP35wTZVP2jJA0GxK6vB/+c
 pnDRw/zZO+BUYSpv/NMpJsQ2SKX+t2h5uvBqveq3Q5PljcZAvb6L0wt3PSUp4kvz
 iRPAIb90FtQqBCLfFnDyIMvzVyCXfHq+eVsFYcvlVOWfdkLaeNEhLyn25whkFXr7
 ricd/yXKdS8T1WHatR1HqzIk7pog7PsPewVrjl78TBx3nyIMxEhtCpV9MrnditfP
 IE1/8hQ2rSriSkFeAi5SYxQ5iNwzQKtKOqMiv7lefIuJiCde+0no4XzMrPz/MaU6
 UGyTRRNiQXSlfZQaMI4Ru1itVdAugRRVScATz69ggFqRyfCVuByM78RaygfcrPEC
 H6tHbeJxyEBytlS2qB2cmVXPvIKOdJ3mU9bGdBy9IuXCj8reJMbzQMfIt4lSow+h
 axggDNhbL2urY9Ymn1wX
 =tYuD
 -----END PGP SIGNATURE-----

Merge tag 'modules-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

Pull modules updates from Jessica Yu:
 "Summary of modules changes for the 4.13 merge window:

   - Minor code cleanups

   - Avoid accessing mod struct prior to checking module struct version,
     from Kees

   - Fix racy atomic inc/dec logic of kmod_concurrent_max in kmod, from
     Luis"

* tag 'modules-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: make the modinfo name const
  kmod: reduce atomic operations on kmod_concurrent and simplify
  module: use list_for_each_entry_rcu() on find_module_all()
  kernel/module.c: suppress warning about unused nowarn variable
  module: Add module name to modinfo
  module: Pass struct load_info into symbol checks
2017-07-12 17:22:01 -07:00
Rafael J. Wysocki c7b5a4e6e8 PCI / PM: Fix native PME handling during system suspend/resume
Commit 76cde7e495 (PCI / PM: Make PCIe PME interrupts wake up from
suspend-to-idle) went too far with preventing pcie_pme_work_fn() from
clearing the root port's PME Status and re-enabling the PME interrupt
which should be done for PMEs to work correctly after system resume.

The failing scenario is as follows:

 1. pcie_pme_suspend() finds that the PME IRQ should be designated
    for system wakeup, so it calls enable_irq_wake() and then sets
    data->suspend_level to PME_SUSPEND_WAKEUP.

 2. PME interrupt happens at this point.

 3. pcie_pme_irq() runs, disables the PME interrupt and queues up
    the execution of pcie_pme_work_fn().

 4. pcie_pme_work_fn() runs before pcie_pme_resume() and breaks out
    of the loop right away, because data->suspend_level is not
    PME_SUSPEND_NONE, and it doesn't re-enable the PME interrupt
    for the same reason.

 5. pcie_pme_resume() runs and simply calls disable_irq_wake()
    without re-enabling the PME interrupt (because data->suspend_level
    is not PME_SUSPEND_NONE), so the PME interrupt remains disabled
    and the PME Status remains set.

To fix this notice that there is no reason why pcie_pme_work_fn()
should behave in a special way during system resume if the PME
interrupt is not disabled by pcie_pme_suspend() and partially revert
commit 76cde7e495 and restore the previous (and correct) behavior
of pcie_pme_work_fn().

Fixes: 76cde7e495 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle)
Reported-and-tested-by: Naresh Solanki <naresh.solanki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-13 01:50:07 +02:00
Nikolay Borisov 3e8f399da4 writeback: rework wb_[dec|inc]_stat family of functions
Currently the writeback statistics code uses a percpu counters to hold
various statistics.  Furthermore we have 2 families of functions - those
which disable local irq and those which doesn't and whose names begin
with double underscore.  However, they both end up calling
__add_wb_stats which in turn calls percpu_counter_add_batch which is
already irq-safe.

Exploiting this fact allows to eliminated the __wb_* functions since
they don't add any further protection than we already have.
Furthermore, refactor the wb_* function to call __add_wb_stat directly
without the irq-disabling dance.  This will likely result in better
runtime of code which deals with modifying the stat counters.

While at it also document why percpu_counter_add_batch is in fact
preempt and irq-safe since at least 3 people got confused.

Link: http://lkml.kernel.org/r/1498029937-27293-1-git-send-email-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:05 -07:00
Joe Perches c945dccc80 ARM: samsung: usb-ohci: move inline before return type
Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/667a515b8d0f10f2465d519f8595edd91552fc5e.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:05 -07:00
Joe Perches ba168a46b0 video: fbdev: omap: move inline before return type
Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/bc5927726abc70d7c066df7ab4cb7cfce4a7b577.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches dce3944717 video: fbdev: intelfb: move inline before return type
Make the code like the rest of the kernel.

But there is an oddity here because the inline should probably be removed.

It's an extern function in intelfb.h and it is used in intelfbdrv.c and
intelfbhw.c.

The inline is kept here as I suppose it's possible for some compiler to
make the uses inline in intelfbdrv and and also create an external
function for intelfbhw.

Link: http://lkml.kernel.org/r/8ba151a1fdc84e42cbf4aafc798513c0158edee1.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Maik Broemme <mbroemme@libmpq.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches 4abf87f41a USB: serial: safe_serial: move __inline__ before return type
Make the code like the rest of the kernel.
Also use inline instead of __inline__.

Link: http://lkml.kernel.org/r/a5072b74b6c293e6ec93c4900482e9d3267f15b2.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches a9e5bfdb9d drivers: tty: serial: move inline before return type
Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/55d3e89d50bb03d603bfb28019fab07f48bdc714.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Pat Gefre <pfg@sgi.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches e0710e510c drivers: s390: move static and inline before return type
Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/3f980cd89084ae09716353aba3171e4b3815e690.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches 0825f49f22 x86/efi: move asmlinkage before return type
Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/1cd3d401626e51ea0e2333a860e76e80bc560a4c.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches 0cef25c1d8 sh: move inline before return type
Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/f81bb2a67a97b1fd8b6ea99bd350d8a0f6864fb1.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches b745fcb949 MIPS: SMP: move asmlinkage before return type
Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/756d3fb543e981b9284e756fa27616725a354b28.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches 9d8a9ae281 m68k: coldfire: move inline before return type
Make the code like the rest of the kernel.

Link: http://lkml.kernel.org/r/14db9c166d5b68efa77e337cfe49bb9b29bca3f7.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches c02f2a911f ia64: sn: pci: move inline before type
Make the use of inline like the rest of the kernel.

Link: http://lkml.kernel.org/r/f42b2202bd0d4e7ccf79ce5348bb255a035e67bb.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches d778931d7b ia64: move inline before return type
Make the use of inline like the rest of the kernel.

Link: http://lkml.kernel.org/r/d47074493af80ce12590340294bc49618165c30d.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches 1d731bb772 FRV: tlbflush: move asmlinkage before return type
Make the use of asmlinkage like the rest of the kernel.

Link: http://lkml.kernel.org/r/efb2dfed4d9315bf68ec0334c81b65af176a0174.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches 8d95a3dca0 CRIS: gpio: move inline before return type
Move inline to be like the rest of the kernel.

Link: http://lkml.kernel.org/r/6bf1bec049897c4158f698b866810f47c728f233.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches 1e90d0ed32 ARM: HP Jornada 7XX: move inline before return type
Convert 'u8 inline' to 'inline u8' to be the same style used by the rest
of the kernel.

Miscellanea:

jornada_ssp_reverse is an odd function.
It is declared inline but is also EXPORT_SYMBOL.
It is also apparently only used by jornada720_ssp.c
Likely the EXPORT_SYMBOL could be removed and the function
converted to static.

The addition of static and removal of EXPORT_SYMBOL was not done.

Link: http://lkml.kernel.org/r/5bd3b2bf39c6c9caf773949f18158f8f5ec08582.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches ead9fba6b8 ARM: KVM: move asmlinkage before type
asmlinkage is either 'extern "C"' or blank.

Move the uses of asmlinkage before the return types to be similar
to the rest of the kernel.

Link: http://lkml.kernel.org/r/005b8e120650c6a13b541e420f4e3605603fe9e6.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Joe Perches 596ed45b5b checkpatch: improve the STORAGE_CLASS test
Make sure static, extern, and asmlinkage appear before a specific type.

e.g.:
	int asmlinkage foo(void)
is better written
       asmlinkage int foo(void)

Link: http://lkml.kernel.org/r/31704c96df2d5fd9df0b41165940a7a4feb16a63.1499284835.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Michal Hocko 0f55685627 mm, migration: do not trigger OOM killer when migrating memory
Page migration (for memory hotplug, soft_offline_page or mbind) needs to
allocate a new memory.  This can trigger an oom killer if the target
memory is depleated.  Although quite unlikely, still possible,
especially for the memory hotplug (offlining of memoery).

Up to now we didn't really have reasonable means to back off.
__GFP_NORETRY can fail just too easily and __GFP_THISNODE sticks to a
single node and that is not suitable for all callers.

But now that we have __GFP_RETRY_MAYFAIL we should use it.  It is
preferable to fail the migration than disrupt the system by killing some
processes.

Link: http://lkml.kernel.org/r/20170623085345.11304-7-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Michal Hocko dbb329561a drm/i915: use __GFP_RETRY_MAYFAIL
Commit 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than
incur the oom for gfx allocations") has tried to remove disruptive OOM
killer because the userspace should be able to cope with allocation
failures.

At the time only __GFP_NORETRY could achieve that and it turned out that
this would fail the allocations just too easily.  So "drm/i915: Remove
__GFP_NORETRY from our buffer allocator" removed it and hoped for a
better solution.  __GFP_RETRY_MAYFAIL is that solution.  It will keep
retrying the allocation until there is no more progress and we would go
OOM.  Instead we fail the allocation and let the caller to deal with it.

Link: http://lkml.kernel.org/r/20170623085345.11304-6-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:04 -07:00
Michal Hocko cc965a29db mm: kvmalloc support __GFP_RETRY_MAYFAIL for all sizes
Now that __GFP_RETRY_MAYFAIL has a reasonable semantic regardless of the
request size we can drop the hackish implementation for !costly orders.
__GFP_RETRY_MAYFAIL retries as long as the reclaim makes a forward
progress and backs of when we are out of memory for the requested size.
Therefore we do not need to enforce__GFP_NORETRY for !costly orders just
to silent the oom killer anymore.

Link: http://lkml.kernel.org/r/20170623085345.11304-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:03 -07:00
Michal Hocko 91c63ecda7 xfs: map KM_MAYFAIL to __GFP_RETRY_MAYFAIL
KM_MAYFAIL didn't have any suitable GFP_FOO counterpart until recently
so it relied on the default page allocator behavior for the given set of
flags.  This means that small allocations actually never failed.

Now that we have __GFP_RETRY_MAYFAIL flag which works independently on
the allocation request size we can map KM_MAYFAIL to it.  The allocator
will try as hard as it can to fulfill the request but fails eventually
if the progress cannot be made.  It does so without triggering the OOM
killer which can be seen as an improvement because KM_MAYFAIL users
should be able to deal with allocation failures.

Link: http://lkml.kernel.org/r/20170623085345.11304-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:03 -07:00
Michal Hocko dcda9b0471 mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator.  This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER.  It has been always
ignored for smaller sizes.  This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.

Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic.  Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success.  This will work independent of the order and overrides the
default allocator behavior.  Page allocator users have several levels of
guarantee vs.  cost options (take GFP_KERNEL as an example)

 - GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
   attempt to free memory at all. The most light weight mode which even
   doesn't kick the background reclaim. Should be used carefully because
   it might deplete the memory and the next user might hit the more
   aggressive reclaim

 - GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
   allocation without any attempt to free memory from the current
   context but can wake kswapd to reclaim memory if the zone is below
   the low watermark. Can be used from either atomic contexts or when
   the request is a performance optimization and there is another
   fallback for a slow path.

 - (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
   non sleeping allocation with an expensive fallback so it can access
   some portion of memory reserves. Usually used from interrupt/bh
   context with an expensive slow path fallback.

 - GFP_KERNEL - both background and direct reclaim are allowed and the
   _default_ page allocator behavior is used. That means that !costly
   allocation requests are basically nofail but there is no guarantee of
   that behavior so failures have to be checked properly by callers
   (e.g. OOM killer victim is allowed to fail currently).

 - GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
   and all allocation requests fail early rather than cause disruptive
   reclaim (one round of reclaim in this implementation). The OOM killer
   is not invoked.

 - GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
   behavior and all allocation requests try really hard. The request
   will fail if the reclaim cannot make any progress. The OOM killer
   won't be triggered.

 - GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
   and all allocation requests will loop endlessly until they succeed.
   This might be really dangerous especially for larger orders.

Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic.  No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.

This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.

[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
  Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
  Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:03 -07:00
Michal Hocko 473738eb78 MIPS: do not use __GFP_REPEAT for order-0 request
Patch series "mm: give __GFP_REPEAT a better semantic".

The main motivation for the change is that the current implementation of
__GFP_REPEAT is not very much useful.

The documentation says:
 * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt
 *   _might_ fail.  This depends upon the particular VM implementation.

It just fails to mention that this is true only for large (costly) high
order which has been the case since the flag was introduced.  A similar
semantic would be really helpful for smal orders as well, though,
because we have places where a failure with a specific fallback error
handling is preferred to a potential endless loop inside the page
allocator.

The earlier cleanup dropped __GFP_REPEAT usage for low (!costly) order
users so only those which might use larger orders have stayed.  One new
user added in the meantime is addressed in patch 1.

Let's rename the flag to something more verbose and use it for existing
users.  Semantic for those will not change.  Then implement low
(!costly) orders failure path which is hit after the page allocator is
about to invoke the oom killer.  With that we have a good counterpart
for __GFP_NORETRY and finally can tell try as hard as possible without
the OOM killer.

Xfs code already has an existing annotation for allocations which are
allowed to fail and we can trivially map them to the new gfp flag
because it will provide the semantic KM_MAYFAIL wants.  Christoph didn't
consider the new flag really necessary but didn't respond to the OOM
killer aspect of the change so I have kept the patch.  If this is still
seen as not really needed I can drop the patch.

kvmalloc will allow also !costly high order allocations to retry hard
before falling back to the vmalloc.

drm/i915 asked for the new semantic explicitly.

Memory migration code, especially for the memory hotplug, should back
off rather than invoking the OOM killer as well.

This patch (of 6):

Commit 3377e227af ("MIPS: Add 48-bit VA space (and 4-level page
tables) for 4K pages.") has added a new __GFP_REPEAT user but using this
flag doesn't really make any sense for order-0 request which is the case
here because PUD_ORDER is 0.  __GFP_REPEAT has historically effect only
on allocation requests with order > PAGE_ALLOC_COSTLY_ORDER.

This doesn't introduce any functional change.  This is a preparatory
patch for later work which renames the flag and redefines its semantic.

Link: http://lkml.kernel.org/r/20170623085345.11304-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:03 -07:00
Rik van Riel 0a782dc31f powerpc,mmap: properly account for stack randomization in mmap_base
When RLIMIT_STACK is, for example, 256MB, the current code results in a
gap between the top of the task and mmap_base of 256MB, failing to take
into account the amount by which the stack address was randomized.  In
other words, the stack gets less than RLIMIT_STACK space.

Ensure that the gap between the stack and mmap_base always takes stack
randomization and the stack guard gap into account.

Inspired by Daniel Micay's linux-hardened tree.

Link: http://lkml.kernel.org/r/20170622200033.25714-4-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Florian Weimer <fweimer@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:03 -07:00