Commit Graph

279 Commits

Author SHA1 Message Date
Ingo Molnar 129c04cb8c perf tools: Add front-end and back-end stalled cycles support
Update perf tooling to deal with front-end and back-end stalled cycles events.

Add both the default 'perf stat' output.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n002io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-29 14:35:49 +02:00
Ingo Molnar 1fc570ad89 perf stat: Add stalled cycles to the default output
The new default output looks like this:

 Performance counter stats for './loop_1b_instructions':

        236.010686 task-clock               #    0.996 CPUs utilized
                 0 context-switches         #    0.000 M/sec
                 0 CPU-migrations           #    0.000 M/sec
                99 page-faults              #    0.000 M/sec
       756,487,646 cycles                   #    3.205 GHz
       354,938,996 stalled-cycles           #   46.92% of all cycles are idle
     1,001,403,797 instructions             #    1.32  insns per cycle
                                            #    0.35  stalled cycles per insn
       100,279,773 branches                 #  424.895 M/sec
            12,646 branch-misses            #    0.013 % of all branches

        0.236902540  seconds time elapsed

We dropped cache-refs and cache-misses and added stalled-cycles - this is a
more generic "how well utilized is the CPU" metric.

If the stalled-cycles ratio is too high then more specific measurements can be
taken to figure out the source of the inefficiency.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-pbpl2l4mn797s69bclfpwkwn@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:57 +02:00
Ingo Molnar 749141d926 perf stat: Make all displayed event names parseable as well
Right now we display this by default:

          0.202204 task-clock-msecs         #      0.282 CPUs
                 0 context-switches         #      0.000 M/sec
                 0 CPU-migrations           #      0.000 M/sec
                85 page-faults              #      0.420 M/sec

The task-clock-msecs event cannot actually be passed back as an
event name, the event name we recognize is 'task-clock'.

So change the output of the cpu-clock and task-clock events
to be idempotent.

( Units should be printed out in the right-side column, if needed. )

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-lexrnbzy09asscgd4f7oac4i@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:55 +02:00
Ingo Molnar ceb53fbf6d perf stat: Fail more clearly when an invalid modifier is specified
Currently we fail without printing any error message on "perf stat -e task-clock-msecs".

The reason is that the task-clock event is matched and the "-msecs" postfix is assumed
to be an event modifier - but is not recognized.

This patch changes the code to be more informative:

 $ perf stat -e task-clock-msecs true
 invalid event modifier: '-msecs'
 Run 'perf list' for a list of valid events and modifiers

And restructures the return value of parse_event_modifier() to allow
the printing of all variants of invalid event modifiers.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-wlaw3dvz1ly6wple8l52cfca@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:55 +02:00
Ingo Molnar b908debd4e perf tools: Accept case-insensitive symbolic event variants
We currently fail on something like '-e CPU-migrations', with:

  invalid or unsupported event: 'CPU-migrations'

While 'CPU-migrations' is how we actually print out the event
in the default perf stat output:

 Performance counter stats for 'true':

          0.202204 task-clock-msecs         #      0.282 CPUs
                 0 context-switches         #      0.000 M/sec
                 0 CPU-migrations           #      0.000 M/sec

So change the matching to be case-insensitive.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-omcm3edjjtx83a4kh2e244se@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:55 +02:00
Ingo Molnar 94403f8863 perf events: Add stalled cycles generic event - PERF_COUNT_HW_STALLED_CYCLES
The new PERF_COUNT_HW_STALLED_CYCLES event tries to approximate
cycles the CPU does nothing useful, because it is stalled on a
cache-miss or some other condition.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-fue11vymwqsoo5to72jxxjyl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:53 +02:00
David Ahern 1424dc9680 perf script: Add support for H/W and S/W events
Custom fields set for each type by prepending field argument with type.
For file with multiple event types (e.g., trace and S/W) display of an
event type suppressed by setting output fields to "".

e.g.,
perf record -ga -e sched:sched_switch -e cpu-clock -c 10000000 -R -- sleep 1
perf script

openssl 11496 [000]  9711.807107: cpu-clock-msecs:
        ffffffff810c22dc arch_local_irq_restore ([kernel.kallsyms])
        ffffffff810c518c __alloc_pages_nodemask ([kernel.kallsyms])
        ffffffff810297b2 pte_alloc_one ([kernel.kallsyms])
        ffffffff810d8b98 __pte_alloc ([kernel.kallsyms])
        ffffffff810daf07 handle_mm_fault ([kernel.kallsyms])
        ffffffff8138763a do_page_fault ([kernel.kallsyms])
        ffffffff81384a65 page_fault ([kernel.kallsyms])
            7f6130507d70 asn1_check_tlen (/lib64/libcrypto.so.1.0.0c)
                       0  ()

         openssl 11496 [000]  9711.808042: sched_switch: prev_comm=openssl ...
     kworker/0:0     4 [000]  9711.808067: sched_switch: prev_comm=kworker/...
         swapper     0 [001]  9711.808090: sched_switch: prev_comm=kworker/...
            sshd 11451 [001]  9711.808185: sched_switch: prev_comm=sshd pre...
swapper     0 [001]  9711.816155: cpu-clock-msecs:
        ffffffff81023609 native_safe_halt ([kernel.kallsyms])
        ffffffff8100132a cpu_idle ([kernel.kallsyms])
        ffffffff8137cf9b start_secondary ([kernel.kallsyms])

openssl 11496 [000]  9711.817104: cpu-clock-msecs:
            7f61304ad723 AES_cbc_encrypt (/lib64/libcrypto.so.1.0.0c)
            7fff3402f950  ()
        12f0debc9a785634  ()

swapper     0 [001]  9711.826155: cpu-clock-msecs:
        ffffffff81023609 native_safe_halt ([kernel.kallsyms])
        ffffffff8100132a cpu_idle ([kernel.kallsyms])
        ffffffff8137cf9b start_secondary ([kernel.kallsyms])

To suppress trace events within the file and use default output for S/W events:
perf script -f trace:

or to suppress S/W events and do default display for trace events:
perf script -f sw:

Custom field selections:
perf script -f sw:comm,tid,time -f trace:time,trace

         openssl 11496  9711.797162:
         swapper     0  9711.807071:
         openssl 11496  9711.807107:
 9711.808042: prev_comm=openssl prev_pid=11496 prev_prio=120 prev_state=R ...
 9711.808067: prev_comm=kworker/0:0 prev_pid=4 prev_prio=120 prev_state=S ...
 9711.808090: prev_comm=kworker/0:0 prev_pid=0 prev_prio=120 prev_state=R ...
 9711.808185: prev_comm=sshd prev_pid=11451 prev_prio=120 prev_state=S ==>...
         swapper     0  9711.816155:
         openssl 11496  9711.817104:
         swapper     0  9711.826155:

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-7-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-14 17:07:20 -03:00
Arnaldo Carvalho de Melo 668b8788f4 perf list: Allow filtering list of events
The man page has the details, here are some examples:

[root@emilia ~]# perf list *fault*  *:*wait*

List of pre-defined events (to be used in -e):
  page-faults OR faults                      [Software event]
  minor-faults                               [Software event]
  major-faults                               [Software event]
  alignment-faults                           [Software event]
  emulation-faults                           [Software event]

  radeon:radeon_fence_wait_begin             [Tracepoint event]
  radeon:radeon_fence_wait_end               [Tracepoint event]
  writeback:wbc_writeback_wait               [Tracepoint event]
  writeback:wbc_balance_dirty_wait           [Tracepoint event]
  writeback:writeback_congestion_wait        [Tracepoint event]
  writeback:writeback_wait_iff_congested     [Tracepoint event]
  sched:sched_wait_task                      [Tracepoint event]
  sched:sched_process_wait                   [Tracepoint event]
  sched:sched_stat_wait                      [Tracepoint event]
  sched:sched_stat_iowait                    [Tracepoint event]
  syscalls:sys_enter_epoll_wait              [Tracepoint event]
  syscalls:sys_exit_epoll_wait               [Tracepoint event]
  syscalls:sys_enter_epoll_pwait             [Tracepoint event]
  syscalls:sys_exit_epoll_pwait              [Tracepoint event]
  syscalls:sys_enter_rt_sigtimedwait         [Tracepoint event]
  syscalls:sys_exit_rt_sigtimedwait          [Tracepoint event]
  syscalls:sys_enter_waitid                  [Tracepoint event]
  syscalls:sys_exit_waitid                   [Tracepoint event]
  syscalls:sys_enter_wait4                   [Tracepoint event]
  syscalls:sys_exit_wait4                    [Tracepoint event]
  syscalls:sys_enter_waitpid                 [Tracepoint event]
  syscalls:sys_exit_waitpid                  [Tracepoint event]
[root@emilia ~]#

Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-17 15:38:58 -02:00
Stephane Eranian f0c55bcf4a perf: make perf stat print user provided full event names
This patch changes the way perf stat prints event names at the end of a
run. Until now, it was trying to reconstruct the event name from its
encoding. The problem is that it would only print generic events without
their modifiers (u, k, pp).

This patch saves the event name as passed by the user in the evsel
struct and uses it to print the final event name.

This would also work in case perf is linked with a library (such as
libpfm4) which provides full PMU event tables.

$ perf stat -e cycles:u,cycles:k date
Wed Feb 16 14:58:52 CET 2011

 Performance counter stats for 'date':

            568600 cycles:u
           2779715 cycles:k

        0.001908182  seconds time elapsed

Cc: Arun Sharma <arun@sharma-home.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LPU-Reference: <4d5bdc64.98a1df0a.7aa3.06c2@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer note: Fixed a merge problem with 023695d "Add cgroup support" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-17 10:29:19 -02:00
Arnaldo Carvalho de Melo 17ea1b70a8 perf tools: Pass the struct opt to the wildcard parsing routine
It is needed because it will call parse_event for each tracepoint
name that matches, and we pass the perf_evlist via opt->value.

Problem introduced in 4503fdd where my assumption about opt being
always non NULL made me not look at callers of parse_events outside
builtin-*.c.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-24 10:58:39 -02:00
Arnaldo Carvalho de Melo 361c99a661 perf evsel: Introduce perf_evlist
Killing two more perf wide global variables: nr_counters and evsel_list
as a list_head.

There are more operations that will need more fields in perf_evlist,
like the pollfd for polling all the fds in a list of evsel instances.

Use option->value to pass the evsel_list to parse_{events,filters}.

LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-22 19:56:28 -02:00
Arnaldo Carvalho de Melo 9486aa3877 perf tools: Fix 64 bit integer format strings
Using %L[uxd] has issues in some architectures, like on ppc64.  Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.

Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.

Reported-by: Denis Kirjanov <dkirjanov@kernel.org>
Tested-by: Denis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-22 23:41:57 -02:00
Arnaldo Carvalho de Melo ad7f4e3f7b perf tools: Fix tracepoint id to string perf.data header table
It was broken by f006d25 that passed just the event name, not the complete
sys:event that it expected to open the /sys/.../sys/sys:event/id file to get
the id.

Fix it by moving it to after parse_events in cmd_record, as at that point
we can just traverse the evsel_list and use evsel->attr.config +
event_name(evsel) instead of re-opening the /id file.

Reported-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20110117202801.GG2085@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-17 18:28:13 -02:00
Arnaldo Carvalho de Melo dd9a9ad5e1 perf tools: Fix handling of wildcards in tracepoint event selectors
It wasn't accounting the ':' when consuming bytes in the the event
selector string, so parse_events() would fail in this test:

                if (!(*str == 0 || *str == ',' || isspace(*str)))
                        return -1;

as *str would be pointing to '*', the last character in the '-e' arg in:

$ perf record -q -a -D -e sched:sched_* | perf script -i - -s perf-script.py

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-17 15:26:07 -02:00
Lin Ming 23a2f3ab46 perf tools: Pass whole attr to event selectors
Since commit 69aad6f1(perf tools: Introduce event selectors), only
perf_event_attr::type and ::config are passed to event selector, which
makes perf tool not work correctly.

For example, PEBS does not work because perf_event_attr::precise_ip is
not passed to the syscall.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-07 01:44:36 -02:00
Han Pingtian f006d25a15 perf tools: Fix buffer overflow error when specifying all tracepoints
I found when specifying all tracepoints with -e to one of subcommand,
such as 'stat', the program will trigger a buffer overflow error, like
this:

*** buffer overflow detected ***: ./perf terminated
======= Backtrace: =========
/lib64/libc.so.6(__fortify_fail+0x37)[0x382cefb2c7]
....

The tracepoints are separated by comma, something like this:

$ perf stat -a -e `perf list |grep Tracepoint|awk -F'[' '{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'`

The root reason of this problem is that store_event_type() is called for all
events, and will overflow the 'filename' at:

    strncat(filename, orgname, strlen(orgname));

This patch fixes it by calling store_event_type() only when the event name has
been found.

LKML-Reference: <20110106093922.GB6713@hpt.nay.redhat.com>
Signed-off-by: Han Pingtian <phan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-06 18:04:46 -02:00
Thomas Renninger 20c457b858 perf timechart: Adjust perf timechart to the new power events
builtin-timechart must only pass -e power:xy events if they are supported by
the running kernel, otherwise try to fetch the old power:power{start,end}
events.

For this I added the tiny helper function:

   int is_valid_tracepoint(const char *event_string)

to parse-events.[hc], which could be more generic as an interface and support
hardware/software/... events, not only tracepoints, but someone else could
extend that if needed...

Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
LKML-Reference: <1294073445-14812-4-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04 08:16:54 +01:00
Arnaldo Carvalho de Melo 70d544d057 perf evsel: Delete the event selectors at exit
Freeing all the possibly allocated resources, reducing complexity
on each tool exit path.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-03 16:51:39 -02:00
Arnaldo Carvalho de Melo 69aad6f1ee perf tools: Introduce event selectors
Out of ad-hoc code and global arrays with hard coded sizes.

This is the first step on having a library that will be first
used on regression tests in the 'perf test' tool.

[acme@felicio linux]$ size /tmp/perf.before
   text	   data	    bss	    dec	    hex	filename
1273776	  97384	5104416	6475576	 62cf38	/tmp/perf.before
[acme@felicio linux]$ size /tmp/perf.new
   text	   data	    bss	    dec	    hex	filename
1275422	  97416	1392416	2765254	 2a31c6	/tmp/perf.new

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-03 16:39:04 -02:00
Corey Ashford 4c635a4e04 perf tools: fix event parsing of comma-separated tracepoint events
There are number of issues that prevent the use of multiple tracepoint events
being specified in a -e/--event switch, separated by commas.

For example, perf stat -e irq:irq_handler_entry,irq:irq_handler_exit ...  fails
because the tracepoint event parsing code doesn't recognize the comma separator
properly.

This patch corrects those issues.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Michael Ellerman <michaele@au1.ibm.com>
LKML-Reference: <1291156021-17711-1-git-send-email-cjashfor@linux.vnet.ibm.com>
Signed-off-by: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-11-30 23:04:39 -02:00
Frederic Weisbecker aa59a48596 perf: Don't use 4 bytes as a default instruction breakpoint length
4 bytes is fine as a default access for data breakpoints. But
instruction breakpoints should take the native pointer length,
otherwise we get a -EINVAL in x86-64.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
2010-06-24 23:35:49 +02:00
Ingo Molnar ed82702155 Merge branch 'perf' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core 2010-05-08 10:02:57 +02:00
Arnaldo Carvalho de Melo 1cf4a0632c perf list: Improve the raw hw event descriptor documentation
It was x86 specific and imcomplete at that, improve the situation by
making it clear where the example provided applies and by adding the
URLs for the Intel and AMD manuals where this is discussed in depth.

Acked-by: Robert Richter <robert.richter@amd.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Reported-by: Robert Richter <robert.richter@amd.com
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-07 14:07:05 -03:00
Peter Zijlstra ab608344bc perf, x86: Improve the PEBS ABI
Rename perf_event_attr::precise to perf_event_attr::precise_ip and
widen it to 2 bits. This new field describes the required precision of
the PERF_SAMPLE_IP field:

  0 - SAMPLE_IP can have arbitrary skid
  1 - SAMPLE_IP must have constant skid
  2 - SAMPLE_IP requested to have 0 skid
  3 - SAMPLE_IP must have 0 skid

And modify the Intel PEBS code accordingly. The PEBS implementation
now supports up to precise_ip == 2, where we perform the IP fixup.

Also s/PERF_RECORD_MISC_EXACT/&_IP/ to clarify its meaning, this bit
should be set for each PERF_SAMPLE_IP field known to match the actual
instruction triggering the event.

This new scheme allows for a PEBS mode that uses the buffer for more
than a single event.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-07 11:31:02 +02:00
Arnaldo Carvalho de Melo 9e32a3cb06 perf list: Add explanation about raw hardware event descriptors
Using explanation given by Ingo Molnar in the oprofile mailing list.

Suggested-by: Nick Black <dank@qemfd.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Black <dank@qemfd.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-05 11:20:05 -03:00
Stephane Eranian 5710fcad7c perf: Fix initialization bug in parse_single_tracepoint_event()
The parse_single_tracepoint_event() was setting some attributes
before it validated the event was indeed a tracepoint event. This
caused problems with other initialization routines like in the
builtin-top.c module whereby sample_period is not set if not 0.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <4bcf232b.698fd80a.6fbe.ffffb737@mx.google.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-04-24 03:24:09 +02:00
Frederic Weisbecker f921281930 perf: Make the trace events sample period default to 1
Trace events are mostly used for tracing and then require not to
be lost when possible. As opposite to hardware events that really
require to trigger after a given sample period, trace events mostly
need to trigger everytime.

It is a frustrating experience to trace with perf and realize we
lost a lot of events because we forgot the "-c 1" option.

Then default sample_period to 1 for trace events but let the user
override it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
2010-04-15 04:12:52 +02:00
Frederic Weisbecker bdef3b02ce perf: Always record tracepoints raw samples from perf record
Trace events are mostly used for tracing rather than simple
counting. Don't bother anymore with adding -R when using them,
just record raw samples of trace events every time.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
2010-04-15 04:12:52 +02:00
Arnaldo Carvalho de Melo 5aab621b7b perf symbols: Move hex2u64 and strxfrchar to symbol.c
Mostly used in symbol.c so move them there to reduce the number
of files needed to use the symbol system.

Also do some header adjustments with the same intent.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1269557941-15617-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-26 08:52:59 +01:00
Peter Zijlstra 69fef0d2e2 perf: Add attr->precise support to raw event parsing
Minimal userspace interface to the new 'precise' events flag.

Can be used like "perf top -e r00c0p" which will use PEBS to sample
retired instructions.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
LKML-Reference: <20100304140100.468665803@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10 13:23:32 +01:00
Masami Hiramatsu fb1d2edf7e perf tools: Support tracepoint glob matching
Support glob wildcard when selecting tracepoint events by -e
option. Without this patch, perf-tools supports 'GROUP:*:record'
syntax for selecting all tracepoints under GROUP group.

With this patch, user can choose tracepoints more flexibly by using
partial wildcards, e.g. 'block:*bio*:record'.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20100105224717.19431.68972.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13 10:09:13 +01:00
Arnaldo Carvalho de Melo ae99fb2c33 perf header: perf_header__push_event() shouldn't die
Just propagate eventual errors.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262047716-23171-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-30 11:59:57 +01:00
Liming Wang 41bdcb23da perf tools: Unify event type description
make event type description to a unified array and
the array index consistent to perf_type_id.

Signed-off-by: Liming Wang <liming.wang@windriver.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1262075829-16257-1-git-send-email-liming.wang@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-30 11:58:53 +01:00
Ulrich Drepper 180570fdb7 perf tools: Optimize parse_subsystem_tracepoint_event()
Uses of strcat are almost always signs that someone is too lazy
to think about the code a bit more carefully.  One always has to
know about the lengths of the strings involved to avoid buffer
overflows.

This is one case where the size of the object code for me is
reduced by 38 bytes.  The code should also be faster, especially
if flags is non-NULL.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: a.p.zijlstra@chello.nl
Cc: fweisbec@gmail.com
Cc: jaswinderrajput@gmail.com
Cc: paulus@samba.org
LKML-Reference: <200912061825.nB6IPUa1023306@hs20-bc2-1.build.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-07 08:09:29 +01:00
Julia Lawall 59b4caeb79 perf tools: Correct size computation in tracepoint_id_to_path()
The size argument to zalloc should be the size of desired
structure, not the pointer to it.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@expression@
expression *x;
@@

x =
 <+...
-sizeof(x)
+sizeof(*x)
...+>// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <Pine.LNX.4.64.0912061016120.20858@ask.diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-06 10:21:59 +01:00
Arnaldo Carvalho de Melo 364794845c perf tools: Introduce zalloc() for the common calloc(1, N) case
This way we type less characters and it looks more like the
kzalloc kernel counterpart.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259071517-3242-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-24 16:37:02 +01:00
Frederic Weisbecker 1b290d670f perf tools: Add support for breakpoint events in perf tools
Add the breakpoint events support with this new sysnopsis:

  mem:addr[:access]

Where addr is a raw addr value in the kernel and access can be
either [r][w][x]

Example to profile tasklist_lock:

	$ grep tasklist_lock /proc/kallsyms
	ffffffff8189c000 D tasklist_lock

	$ perf record -e mem:0xffffffff8189c000:rw -a -f -c 1
	$ perf report

	# Samples: 62
	#
	# Overhead          Command  Shared Object  Symbol
	# ........  ...............  .............  ......
	#
	    29.03%          swapper  [kernel]       [k] _raw_read_trylock
	    29.03%          swapper  [kernel]       [k] _raw_read_unlock
	    19.35%             init  [kernel]       [k] _raw_read_trylock
	    19.35%             init  [kernel]       [k] _raw_read_unlock
	     1.61%         events/0  [kernel]       [k] _raw_read_trylock
	     1.61%         events/0  [kernel]       [k] _raw_read_unlock

Coming soon:

 - Support for symbols in the event definition.

 - Default period to 1 for breakpoint events because these are
   not high frequency events. The same thing is needed for trace
   events.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1258987355-8751-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
2009-11-23 18:18:31 +01:00
Ingo Molnar 0ffa798d94 Merge branches 'perf/powerpc' and 'perf/bench' into perf/core
Merge reason: Both 'perf bench' and the pending PowerPC changes
              are now ready for the next merge window.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-15 09:51:24 +01:00
Clark Williams 549104f22b perf tools: Modify perf routines to use new debugfs routines
modify perf.c get_debugfs_mntpnt() to use the util/debugfs.c
debugfs_find_mountpoint()

modify util/parse-events.c to use debugfs_valid_mountpoint().

Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155720.624cc87e@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-08 18:01:35 +01:00
Anton Blanchard f7d7986060 perf_event: Add alignment-faults and emulation-faults software events
Add two more software events that are common to many cpus.

Alignment faults: When a load or store is not aligned properly.

Emulation faults: When an instruction is emulated in software.

Both cause a very significant slowdown (100x or worse), so identifying and
fixing them is very important.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28 16:13:03 +11:00
Marti Raudsepp 689d301878 perf tools: Output 'perf list' to stdout not stderr
Writing to stdout is probably the expected behavior because the
user explicitly asked for a list.

Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4ebb59420ef057972167.1256603585@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-27 14:52:32 +01:00
Marti Raudsepp 85df6f683e perf tools: Notify user when unrecognized event is specified
Previously no indication was given about what went wrong.

Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <03ec9ee96f17cef05424.1256603584@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-27 14:52:31 +01:00
Li Zefan c171b552a7 perf trace: Add filter Suppport
Add a new option "--filter <filter_str>" to perf record, and
it should be right after "-e trace_point":

 #./perf record -R -f -e irq:irq_handler_entry --filter irq==18
 ^C
 # ./perf trace
            perf-4303  ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0

See Documentation/trace/events.txt for the syntax of filter
expressions.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD6955F.90602@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:35:23 +02:00
Ashwin Chaugule 63c9e01e1a perf tools: Remove static debugfs path from parse-events
Timechart doesn't work if debugfs is not in /sys/kernel/debug/.
Fixed by using global debugfs_path which is filled in by perf.

Signed-off-by: Ashwin Chaugule <ashwinc@quicinc.com>
Cc: "Arjan van de Ven" <arjan@linux.intel.com>
LKML-Reference: <a751bdc6978478de6d10440e587a2cc7.squirrel@www.codeaurora.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 22:41:05 +02:00
Eric Dumazet 725b13685c perf tools: Dont use openat()
openat() is still a young glibc facility, better to not use it in a
non performance critical program (perf list)

Many machines have older glibc (RHEL 4 Update 5 -> glibc-2.3.4-2.36
on my dev machine for example).

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ulrich Drepper <drepper@redhat.com>
LKML-Reference: <4ABB767D.6080004@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-24 21:20:08 +02:00
Ingo Molnar cdd6c482c9 perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:28:04 +02:00
Arjan van de Ven 8755a8f27a perf: Store trace event name/id pairs in perf.data
The trace event name<->id mapping is dynamic for each kernel
compile. In order for perf.data to be useable outside the actual
system, we thus need to store a table of this mapping for later
use.

This patch adds this table to perf.data, and provides helper
functions for lookup up fields from this table.

To avoid mistakes, lookup-from-table is kept completely seprate
from lookup-from-local-debugfs.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130405.6960d099@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19 11:42:11 +02:00
Li Zefan 1281a49b7a perf trace: Sample timestamp and cpu when using record flag
Sample timestamp and cpu just like the -R option.

Before:
            init-0     [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=18 handler=eth0
            init-0     [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=18 handler=eth0
            init-0     [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=1 handler=i8042
            init-0     [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=18 handler=eth0
            init-0     [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=1 handler=i8042

After:
            init-0     [001]  7364.568965353: irq_handler_entry: irq=18 handler=eth0
            init-0     [001]  7365.530226877: irq_handler_entry: irq=1 handler=i8042
            init-0     [001]  7365.542831563: irq_handler_entry: irq=18 handler=eth0
            init-0     [001]  7365.644156299: irq_handler_entry: irq=18 handler=eth0
            init-0     [001]  7365.694556201: irq_handler_entry: irq=18 handler=eth0

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4AB1F827.8040905@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 00:30:25 +02:00
Li Zefan 270bbbe80d perf tools: Increase MAX_EVENT_LENGTH
The name length of some trace events is longer than 30, like
sys_enter_sched_get_priority_max and
ext4_mb_discard_preallocations.

Passing those events to perf-record will fail, try:

  # ./perf record -f -e syscalls:sys_enter_sched_get_priority_max -F 1 -a

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4AB1F4AB.7050205@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 00:30:25 +02:00
Ingo Molnar 1fc35b29b4 perf sched: Implement the 'perf sched record' subcommand
Implement the 'perf sched record' subcommand that adds a
default list of events, turns on raw sampling and system-wide
tracing and passes off the rest of the command to perf record.

This is more convenient than having to specify the events all
the time.

Before:

 $ perf record -a -R -e sched:sched_switch:r -e sched:sched_stat_wait:r -e sched:sched_stat_sleep:r -e sched:sched_stat_iowait:r -e sched:sched_process_exit:r -e sched:sched_process_fork:r -e sched:sched_wakeup:r -e sched:sched_migrate_task:r -c 1 sleep 1

After:

 $ perf sched record -f sleep 1

Also fix an assumption in the event string parser that assumed
that strings passed in can be modified. (In this case they wont
be as they come from a readonly constant section.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 10:22:51 +02:00
Frederic Weisbecker bcd3279f46 perf tools: Allow the specification of all tracepoints at once
Currently, when one wants to activate every tracepoint
counters of a subsystem from perf record, the current sequence
is needed:

  perf record -e subsys:ev1 -e subsys:ev2 -e subsys:ev3

This may annoy the most patient of us.

Now we can just do:

  perf record -e subsys:*

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13 10:22:40 +02:00
Linus Torvalds 483e3cd6a3 Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits)
  ring-buffer: only enable ring_buffer_swap_cpu when needed
  ring-buffer: check for swapped buffers in start of committing
  tracing: report error in trace if we fail to swap latency buffer
  tracing: add trace_array_printk for internal tracers to use
  tracing: pass around ring buffer instead of tracer
  tracing: make tracing_reset safe for external use
  tracing: use timestamp to determine start of latency traces
  tracing: Remove mentioning of legacy latency_trace file from documentation
  tracing/filters: Defer pred allocation, fix memory leak
  tracing: remove users of tracing_reset
  tracing: disable buffers and synchronize_sched before resetting
  tracing: disable update max tracer while reading trace
  tracing: print out start and stop in latency traces
  ring-buffer: disable all cpu buffers when one finds a problem
  ring-buffer: do not count discarded events
  ring-buffer: remove ring_buffer_event_discard
  ring-buffer: fix ring_buffer_read crossing pages
  ring-buffer: remove unnecessary cpu_relax
  ring-buffer: do not swap buffers during a commit
  ring-buffer: do not reset while in a commit
  ...
2009-09-11 13:24:03 -07:00
Ingo Molnar ed011b22ce Merge commit 'v2.6.31-rc9' into tracing/core
Merge reason: move from -rc5 to -rc9.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-06 06:11:42 +02:00
Ulrich Drepper 6b58e7f146 perf tools: Avoid unnecessary work in directory lookups
This patch improves some (common) inefficiencies in the
handling of directory lookups:

- not using the d_type information returned by the kernel

- constructing (absolute) paths for file operation even though
  directory-relative operations using the *at functions is
  possible

There are more places to fix but this is a start.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090904193951.GB6186@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04 21:50:17 +02:00
Frederic Weisbecker 1ef2ed1066 perf tools: Only save the event formats we need
While opening a trace event counter, every events are saved in
the trace.info file. But we only want to save the
specifications of the events we are using.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1251421798-9101-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28 07:58:11 +02:00
Ingo Molnar 83a0944fa9 perf: Enable more compiler warnings
Related to a shadowed variable bug fix Valdis Kletnieks noticed
that perf does not get built with -Wshadow, which could have
helped us avoid the bug.

So enable -Wshadow and also enable the following warnings on
perf builds, in addition to the already enabled -Wall -Wextra
-std=gnu99 warnings:

 -Wcast-align
 -Wformat=2
 -Wshadow
 -Winit-self
 -Wpacked
 -Wredundant-decls
 -Wstack-protector
 -Wstrict-aliasing=3
 -Wswitch-default
 -Wswitch-enum
 -Wno-system-headers
 -Wundef
 -Wvolatile-register-var
 -Wwrite-strings
 -Wbad-function-cast
 -Wmissing-declarations
 -Wmissing-prototypes
 -Wnested-externs
 -Wold-style-definition
 -Wstrict-prototypes
 -Wdeclaration-after-statement

And change/fix the perf code to build cleanly under GCC 4.3.2.

The list of warnings enablement is rather arbitrary: it's based
on my (quick) reading of the GCC manpages and trying them on
perf.

I categorized the warnings based on individually enabling them
and looking whether they trigger something in the perf build.
If i liked those warnings (i.e. if they trigger for something
that arguably could be improved) i enabled the warning.

If the warnings seemed to come from language laywers spamming
the build with tons of nuisance warnings i generally kept them
off. Most of the sign conversion related warnings were in
this category. (A second patch enabling some of the sign
warnings might be welcome - sign bugs can be nasty.)

I also kept warnings that seem to make sense from their manpage
description and which produced no actual warnings on our code
base. These warnings might still be turned off if they end up
being a nuisance.

I also left out a few warnings that are not supported in older
compilers.

[ Note that these changes might break the build on older
  compilers i did not test, or on non-x86 architectures that
  produce different warnings, so more testing would be welcome. ]

Reported-by: Valdis.Kletnieks@vt.edu
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16 10:47:47 +02:00
Frederic Weisbecker 3a9f131fb0 perf tools: Add a per tracepoint counter attribute to get raw sample
Add a new flag field while opening a tracepoint perf counter:

	-e tracepoint_subsystem:tracepoint_name:flags

This is intended to be generic although for now it only supports the
r[e[c[o[r[d]]]]] flag:

	./perf record -e workqueue:workqueue_insertion:record
	./perf record -e workqueue:workqueue_insertion:r

will have the same effect: enabling the raw samples record for
the given tracepoint counter.

In the future, we may want to support further flags, separated
by commas.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250152039-7284-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-13 10:37:25 +02:00
Jason Baron 48c2e17f1f tracing: Add more namespace area to 'perf list' output
The new syscall tracepoints names can be too long for the 'perf list'
output.
Add a few more characters.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-11 20:35:29 +02:00
Peter Zijlstra ae07b63f4b perf list: Fix the output to not include tracepoints without an id
Stop perf list from displaying tracepoints without an id file,
those are special tracepoints that are not interfaced to
perfcounters so listing them is erroneous and passing them as
events will produce no output.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:38 +02:00
Peter Zijlstra 8f18aec535 perf report: Fix per task mult-counter stat reporting
Brice Goglin reported:

> I can easily sort them by thread id, but I don't know how to match
> my 4 events with each group of 4 lines.

Also report the counter id and the time running/enabled
stats (in case the counter got time-shared).

Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:54:35 +02:00
Jason Baron 5beeded123 perf_counter: Detect debugfs location
If "/sys/kernel/debug" is not a debugfs mount point, search for the debugfs
filesystem in /proc/mounts, but also allows the user to specify
'--debugfs-dir=blah' or set the environment variable: 'PERF_DEBUGFS_DIR'

Signed-off-by: Jason Baron <jbaron@redhat.com>
[ also made it probe "/debug" by default ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090721181629.GA3094@redhat.com>
2009-07-22 18:05:57 +02:00
Jason Baron f6bdafef2a perf_counter: Add tracepoint support to perf list, perf stat
Add support to 'perf list' and 'perf stat' for kernel tracepoints. The
implementation creates a 'for_each_subsystem' and 'for_each_event' for
easy iteration over the tracepoints.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <426129bf9fcc8ee63bb094cf736e7316a7dcd77a.1248190728.git.jbaron@redhat.com>
2009-07-22 18:05:57 +02:00
Roel Kluin 23cdb5d517 perf_counter tools: Fix index boundary check
Keep index within event_type_descriptors[]

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A5A7F0B.4070106@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-13 10:58:28 +02:00
Anton Blanchard 9590b7ba3f perf_counter tools: Rename cache events to remove $
The cache events contain '$' which will hit shell variable
expansion. To avoid confusion change this to 'cache', ie
L1-d$-loads becomes L1-dcache-loads.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090706120131.GB4391@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-10 10:04:06 +02:00
Jaswinder Singh Rajput 73c24cb86c perf list: Add cache events
After:

$ ./perf list

List of pre-defined events (to be used in -e):

  cpu-cycles OR cycles                     [Hardware event]
  instructions                             [Hardware event]
  cache-references                         [Hardware event]
  cache-misses                             [Hardware event]
  branch-instructions OR branches          [Hardware event]
  branch-misses                            [Hardware event]
  bus-cycles                               [Hardware event]

  cpu-clock                                [Software event]
  task-clock                               [Software event]
  page-faults OR faults                    [Software event]
  minor-faults                             [Software event]
  major-faults                             [Software event]
  context-switches OR cs                   [Software event]
  cpu-migrations OR migrations             [Software event]

  L1-d$-loads                              [Hardware cache event]
  L1-d$-load-misses                        [Hardware cache event]
  L1-d$-stores                             [Hardware cache event]
  L1-d$-store-misses                       [Hardware cache event]
  L1-d$-prefetches                         [Hardware cache event]
  L1-d$-prefetch-misses                    [Hardware cache event]
  L1-i$-loads                              [Hardware cache event]
  L1-i$-load-misses                        [Hardware cache event]
  L1-i$-prefetches                         [Hardware cache event]
  L1-i$-prefetch-misses                    [Hardware cache event]
  LLC-loads                                [Hardware cache event]
  LLC-load-misses                          [Hardware cache event]
  LLC-stores                               [Hardware cache event]
  LLC-store-misses                         [Hardware cache event]
  LLC-prefetches                           [Hardware cache event]
  LLC-prefetch-misses                      [Hardware cache event]
  dTLB-loads                               [Hardware cache event]
  dTLB-load-misses                         [Hardware cache event]
  dTLB-stores                              [Hardware cache event]
  dTLB-store-misses                        [Hardware cache event]
  dTLB-prefetches                          [Hardware cache event]
  dTLB-prefetch-misses                     [Hardware cache event]
  iTLB-loads                               [Hardware cache event]
  iTLB-load-misses                         [Hardware cache event]
  branch-loads                             [Hardware cache event]
  branch-load-misses                       [Hardware cache event]

  rNNN                                     [raw hardware event descriptor]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1246453578.3072.1.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 15:25:03 +02:00
Ingo Molnar f37a291c52 perf_counter tools: Add more warnings and fix/annotate them
Enable -Wextra. This found a few real bugs plus a number
of signed/unsigned type mismatches/uncleanlinesses. It
also required a few annotations

All things considered it was still worth it so lets try with
this enabled for now.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 12:49:48 +02:00
Paul Mackerras 61c45981dd perf_counter tools: Rework event string parsing/syntax
This reworks the parser for event descriptors to make it more
consistent in what it accepts.  It is now structured as a
recursive descent parser for the following grammar:

events		::= event ( ("," | space) space* event )*
event		::= ( raw_event | numeric_event | symbolic_event |
		      generic_hw_event ) [ event_modifier ]
raw_event	::= "r" hex_number
numeric_event	::= number ":" number
number		::= decimal_number | "0x" hex_number | "0" octal_number
symbolic_event	::= string_from_event_symbols_array
generic_hw_event::= cache_type ( "-" ( cache_op | cache_result ) )*
event_modifier	::= ":" ( "u" | "k" | "h" )+

with the extra restriction that you can have at most one
cache_op and at most one cache_result.

We pass the current string pointer by reference (i.e. as a
const char **) to the various parsing functions so that they
can advance the pointer to indicate how much they consumed.
They return 0 if they didn't recognize the thing at the pointer
or 1 if they did (and advance the pointer past it).

This also fixes parse_aliases to take the longest matching
alias from the table, not the first one.  Otherwise "l1-data"
would match the "l1-d" alias and the "ata" would not be
consumed.

This allows event modifiers indicating what processor modes to
count in to be applied to any event, not just numeric events,
and adds a ":h" modifier to indicate counting in hypervisor
mode.  Specifying ":u" now sets both exclude_kernel and
exclude_hv, and so on.  Multiple modes can be specified, e.g.
":uk" will count in user or hypervisor mode (i.e. only
exclude_kernel will be set).

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <19018.53826.843815.189847@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 10:23:17 +02:00
Jaswinder Singh Rajput 4418351f06 perf_counter tools: Add alias for 'l1d' and 'l1i'
Add 'l1d' and 'l1i' aliases again as shortcuts - just dont make them
the primary display alias.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1245945462.9157.11.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:54:53 +02:00
Jaswinder Singh Rajput e5c5954779 perf_counter tools: Shorten names for events
Added new alias for events.

On AMD box:

 $ ./perf stat -e l1d -e l1d-misses -e l1d-write -e l1d-prefetch -e l1d-prefetch-miss -e l1i -e l1i-misses -e l1i-prefetch -e l2 -e l2-misses -e l2-write -e dtlb -e dtlb-misses -e itlb -e itlb-misses -e bpu -e bpu-misses -- ls -lR /usr/include/ > /dev/null

Before :

 Performance counter stats for 'ls -lR /usr/include/':

      248064467  L1-data-Cache-Load-Referencees  (scaled from 23.27%)
        1001433  L1-data-Cache-Load-Misses  (scaled from 23.34%)
         153691  L1-data-Cache-Store-Referencees  (scaled from 23.34%)
         423248  L1-data-Cache-Prefetch-Referencees  (scaled from 23.33%)
         302138  L1-data-Cache-Prefetch-Misses  (scaled from 23.25%)
      251217546  L1-instruction-Cache-Load-Referencees  (scaled from 23.25%)
        5757005  L1-instruction-Cache-Load-Misses  (scaled from 23.23%)
          93435  L1-instruction-Cache-Prefetch-Referencees  (scaled from 23.24%)
        6496073  L2-Cache-Load-Referencees  (scaled from 23.32%)
         609485  L2-Cache-Load-Misses  (scaled from 23.45%)
        6876991  L2-Cache-Store-Referencees  (scaled from 23.71%)
      248922840  Data-TLB-Cache-Load-Referencees  (scaled from 23.94%)
        5828386  Data-TLB-Cache-Load-Misses  (scaled from 24.17%)
      257613506  Instruction-TLB-Cache-Load-Referencees  (scaled from 24.20%)
           6833  Instruction-TLB-Cache-Load-Misses  (scaled from 23.88%)
      109043606  Branch-Cache-Load-Referencees  (scaled from 23.64%)
        5552296  Branch-Cache-Load-Misses  (scaled from 23.42%)

    0.413702461  seconds time elapsed.

After :

 Peformance counter stats for 'ls -lR /usr/include/':

      266590464  L1-d$-loads           (scaled from 23.03%)
        1222273  L1-d$-load-misses     (scaled from 23.58%)
         146204  L1-d$-stores          (scaled from 23.83%)
         406344  L1-d$-prefetches      (scaled from 24.09%)
         283748  L1-d$-prefetch-misses (scaled from 24.10%)
      249650965  L1-i$-loads           (scaled from 23.80%)
        3353961  L1-i$-load-misses     (scaled from 23.82%)
         104599  L1-i$-prefetches      (scaled from 23.68%)
        4836405  LLC-loads             (scaled from 23.67%)
         498214  LLC-load-misses       (scaled from 23.66%)
        4953994  LLC-stores            (scaled from 23.64%)
      243354097  dTLB-loads            (scaled from 23.77%)
        6468584  dTLB-load-misses      (scaled from 23.74%)
      249719549  iTLB-loads            (scaled from 23.25%)
           5060  iTLB-load-misses      (scaled from 23.00%)
      112343016  branch-loads          (scaled from 22.76%)
        5528876  branch-load-misses    (scaled from 22.54%)

    0.427154051  seconds time elapsed.

Reported-by : Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245934522.5308.39.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 17:30:23 +02:00
Jaswinder Singh Rajput 06813f6c74 perf_counter tools: Check for valid cache operations
Made new table for cache operartion stat 'hw_cache_stat' as:

 L1I : Read and prefetch only
 ITLB and BPU : Read-only

introduce is_cache_op_valid() for cache operation validity

And checks for valid cache operations.

Reported-by : Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245930367.5308.33.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 14:08:49 +02:00
Jaswinder Singh Rajput c0c22dbfa8 perf_counter tools: Set alias for page-faults
"faults" should be alias for "page-faults"

Also fixed alignment and 80 characters issue

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245683846.12092.1.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 17:25:53 +02:00
Jaswinder Singh Rajput 74d5b5889e perf_counter tools: Introduce alias member in event_symbol
By introducing alias member in event_symbol :

1. duplicate lines are removed, like:
   cpu-cycles and cycles
   branch-instructions and branches
   context-switches and cs
   cpu-migrations and migrations

2. We can also add alias for another events.

Now ./perf list looks like :

List of pre-defined events (to be used in -e):

  cpu-cycles OR cycles                     [Hardware event]
  instructions                             [Hardware event]
  cache-references                         [Hardware event]
  cache-misses                             [Hardware event]
  branch-instructions OR branches          [Hardware event]
  branch-misses                            [Hardware event]
  bus-cycles                               [Hardware event]

  cpu-clock                                [Software event]
  task-clock                               [Software event]
  page-faults                              [Software event]
  faults                                   [Software event]
  minor-faults                             [Software event]
  major-faults                             [Software event]
  context-switches OR cs                   [Software event]
  cpu-migrations OR migrations             [Software event]

  rNNN                                     [raw hardware event descriptor]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245669268.17153.8.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 13:29:58 +02:00
Jaswinder Singh Rajput 51e2684231 perf_counter tools: Define separate declarations for H/W and S/W events
Define separate declarations for H/W and S/W events to:

 1. Shorten name to save some space so that we can add more members
 2. Fix alignment
 3. Avoid declaring HARDWARE/SOFTWARE again and again.

Removed unused CR(x, y)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245669194.17153.6.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 13:29:57 +02:00
Paul Mackerras 9cffa8d533 perf_counter tools: Define and use our own u64, s64 etc. definitions
On 64-bit powerpc, __u64 is defined to be unsigned long rather than
unsigned long long.  This causes compiler warnings every time we
print a __u64 value with %Lx.

Rather than changing __u64, we define our own u64 to be unsigned long
long on all architectures, and similarly s64 as signed long long.
For consistency we also define u32, s32, u16, s16, u8 and s8.  These
definitions are put in a new header, types.h, because these definitions
are needed in util/string.h and util/symbol.h.

The main change here is the mechanical change of __[us]{64,32,16,8}
to remove the "__".  The other changes are:

* Create types.h
* Include types.h in perf.h, util/string.h and util/symbol.h
* Add types.h to the LIB_H definition in Makefile
* Added (u64) casts in process_overflow_event() and print_sym_table()
  to kill two remaining warnings.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
LKML-Reference: <19003.33494.495844.956580@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 18:25:47 +02:00
Ingo Molnar 44175b6f39 perf stat: Reorganize output
- use IPC for the instruction normalization output
 - CPUs for the CPU utilization factor value.
 - print out time elapsed like the other rows
 - tidy up the task-clocks/cpu-clocks printout

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 13:40:03 +02:00
Yong Wang faafec1e61 perf_counter tools: Remove one L1-data alias
Otherwise all L1-instruction aliases will be recognized as
L1-data by strcasestr() when calling function parse_aliases.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090612031706.GA22126@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-12 13:45:09 +02:00
Peter Zijlstra f4dbfa8f31 perf_counter: Standardize event names
Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 17:54:15 +02:00
Ingo Molnar 8953645fec perf_counter tools: Fix error condition in parse_aliases()
gcc warned about this bug:

util/parse-events.c: In function ‘parse_generic_hw_symbols’:
util/parse-events.c:175: warning: comparison is always false due to limited range of data type
util/parse-events.c:182: warning: comparison is always false due to limited range of data type
util/parse-events.c:190: warning: comparison is always false due to limited range of data type

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 21:09:08 +02:00
Ingo Molnar 864709302a perf_counter tools: Move from Documentation/perf_counter/ to tools/perf/
Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 20:33:43 +02:00