Some of the tracers have been renamed, which was not updated in the in-kernel
run-time README file. Update it.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
LKML-Reference: <200903231158.32151.knikanth@suse.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix a crash while cat trace file
Currently we are using a cpumask to remind each cpu where a
trace occured. It lets us notice the user that a cpu just had
its first trace.
But on latest -tip we have the following crash once we cat the trace
file:
IP: [<c0270c4a>] print_trace_fmt+0x45/0xe7
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/class/net/eth0/carrier
Pid: 3897, comm: cat Not tainted (2.6.29-tip-02825-g0f22972-dirty #81)
EIP: 0060:[<c0270c4a>] EFLAGS: 00010297 CPU: 0
EIP is at print_trace_fmt+0x45/0xe7
EAX: 00000000 EBX: 00000000 ECX: c12d9e98 EDX: ccdb7010
ESI: d31f4000 EDI: 00322401 EBP: d31f3f10 ESP: d31f3efc
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process cat (pid: 3897, ti=d31f2000 task=d3b3cf20 task.ti=d31f2000)
Stack:
d31f4080 ccdb7010 d31f4000 d691fe70 ccdb7010 d31f3f24 c0270e5c d31f4000
d691fe70 d31f4000 d31f3f34 c02718e8 c12d9e98 d691fe70 d31f3f70 c02bfc33
00001000 09130000 d3b46e00 d691fe98 00000000 00000079 00000001 00000000
Call Trace:
[<c0270e5c>] ? print_trace_line+0x170/0x17c
[<c02718e8>] ? s_show+0xa7/0xbd
[<c02bfc33>] ? seq_read+0x24a/0x327
[<c02bf9e9>] ? seq_read+0x0/0x327
[<c02ab18b>] ? vfs_read+0x86/0xe1
[<c02ab289>] ? sys_read+0x40/0x65
[<c0202d8f>] ? sysenter_do_call+0x12/0x3c
Code: 00 00 00 89 45 ec f7 c7 00 20 00 00 89 55 f0 74 4e f6 86 98 10 00 00 02 74 45 8b 86 8c 10 00 00 8b 9e a8 10 00 00 e8 52 f3 ff ff <0f> a3 03 19 c0 85 c0 75 2b 8b 86 8c 10 00 00 8b 9e a8 10 00 00
EIP: [<c0270c4a>] print_trace_fmt+0x45/0xe7 SS:ESP 0068:d31f3efc
CR2: 0000000000000000
---[ end trace aa9cf38e5ebed9dd ]---
This is because we alloc the iter->started cpumask on tracing_pipe_open but
not on tracing_open.
It hadn't been noticed until now because we need to have ring buffer overruns
to activate the starting of cpu buffer detection.
Also, we need a check to not print the messagge for the first trace on the file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238619188-6109-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Building a kernel with tracing can raise the following warning on
tip/master:
kernel/trace/trace.c:1249: error: implicit declaration of function 'vbin_printf'
We are missing an include to string.h
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238160130-7437-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix time output bug in 32bits system
ns2usecs() returns 'long', it's incorrect.
(In i386)
...
<idle>-0 [000] 521.442100: _spin_lock <-tick_do_update_jiffies64
<idle>-0 [000] 521.442101: do_timer <-tick_do_update_jiffies64
<idle>-0 [000] 521.442102: update_wall_time <-do_timer
<idle>-0 [000] 521.442102: update_xtime_cache <-update_wall_time
....
(It always print the time less than 2200 seconds besides ...)
Because 'long' is 32bits in i386. ( (1<<31) useconds is about 2200 seconds)
...
<idle>-0 [001] 4154502640.134759: rcu_bh_qsctr_inc <-__do_softirq
<idle>-0 [001] 4154502640.134760: _local_bh_enable <-__do_softirq
<idle>-0 [001] 4154502640.134761: idle_cpu <-irq_exit
...
(very large value)
Because 'long' is a signed type and it is 32bits in i386.
Changes in v2:
return 'unsigned long long' instead of 'cycle_t'
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49D05D10.4030009@cn.fujitsu.com>
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: give user a choice to show times spent while sleeping
The user may want to see the time a function spent sleeping.
This patch adds the trace option "sleep-time" to allow that.
The "sleep-time" option is default on.
echo sleep-time > /debug/tracing/trace_options
produces:
------------------------------------------
2) avahi-d-3428 => <idle>-0
------------------------------------------
2) | finish_task_switch() {
2) 0.621 us | _spin_unlock_irq();
2) 2.202 us | }
2) ! 1002.197 us | }
2) ! 1003.521 us | }
where as,
echo nosleep-time > /debug/tracing/trace_options
produces:
0) <idle>-0 => yum-upd-3416
------------------------------------------
0) | finish_task_switch() {
0) 0.643 us | _spin_unlock_irq();
0) 2.342 us | }
0) + 41.302 us | }
0) + 42.453 us | }
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix traces output
Sometimes one can observe an imbalance in the traces between function
calls and function return traces:
func1() {
}
}
The curly brace inside func1() is the return of another function nested
inside func1. The return trace have been inserted in the buffer but not
the entry.
We are storing a return address on the function traces stack while we
haven't inserted its entry on the buffer, hence the imbalance on the
traces.
This is because the tracers doesn't check all failures that can happen
on buffer insertion.
This patch reports the tracing recursion failures and the ring buffer
failures. In such cases, we now restore the original return address for
the function, giving up its return trace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237843021-11695-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix a crash with ftrace={nop,boot} parameter
If the nop or initcall tracers are launched as boot tracers,
they will attempt to create their option directory and files.
But these tracers are registered very early and then assigned
as "boot tracers" very early if asked to.
Since they do this before debugfs has been registered (core initcall),
a crash is triggered.
Another early tracers could also come later. So we fix it by
checking if debugfs is initialized before creating the root
tracing directory.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237759847-21025-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix hard-lockup with sched switch events
Some ftrace events, such as sched wakeup, can be traced
while the runqueue lock is hold. Since they are using
trace_current_buffer_unlock_commit(), they call wake_up()
which can try to grab the runqueue lock too, resulting in
a deadlock.
Now for all event, we call a new helper:
trace_nowake_buffer_unlock_commit() which do pretty the same than
trace_current_buffer_unlock_commit() except than it doesn't call
trace_wake_up().
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237759847-21025-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup.
This patch fixes the following sparse warnings:
kernel/trace/trace.c:385:9: warning: symbol 'trace_seq_to_buffer' was
not declared. Should it be static?
kernel/trace/trace_clock.c:29:13: warning: symbol 'trace_clock_local'
was not declared. Should it be static?
kernel/trace/trace_clock.c:54:13: warning: symbol 'trace_clock' was not
declared. Should it be static?
kernel/trace/trace_clock.c:74:13: warning: symbol 'trace_clock_global'
was not declared. Should it be static?
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
LKML-Reference: <1237741871-5827-4-git-send-email-dmitri.vorobiev@movial.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: detect tracing related hangs
Sometimes, with some configs, the function graph tracer can make
the timer interrupt too much slow, hanging the kernel in an endless
loop of timer interrupts servicing.
As suggested by Ingo, this patch brings a watchdog which stops the
selftest after a defined number of functions traced, definitely
disabling this tracer.
For those who want to debug the cause of the function graph trace
hang, you can pass the ftrace_dump_on_oops kernel parameter to dump
the traces after this hang detection.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237694675-23509-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The function depth in trace_printk was to facilitate the function
graph output. Now that the function graph calculates the depth within
the trace output, we no longer need to record the depth when the
trace_printk is called.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch makes print_printk_msg_only and print_bprintk_msg_only
global for other functions to use. It also renames them by adding
a "trace_" to the beginning to avoid namespace collisions.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
There is currently no easy way to clear the trace buffer. Currently
the only way is to change the current tracer.
This patch lets the user clear the trace buffer by simply writing
into the trace files.
echo > /debug/tracing/trace
or to clear a single cpu (i.e. for CPU 1):
echo > /debug/tracing/per_cpu/cpu1/trace
Requested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix command line to pid mapping
map_cmdline_to_pid[] is checked in trace_save_cmdline(), but never
updated. This results in stale pid to command line mappings and the
tracer output will associate the wrong comm string.
Signed-off-by: Carsten Emde <Carsten.Emde@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: prevent stale command line output
In case there is no valid command line mapping for a pid
trace_find_cmdline() returns without updating the comm buffer. The
trace dump keeps the previous entry which results in confusing trace
output:
<idle>-0 [000] 280.702056 ....
<idle>-23456 [000] 280.702080 ....
Update the comm buffer with "<...>" when no mapping is found.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
The command line recorder uses (unsigned) -1 to mark non mapped
entries in the pid to command line maps. The validity check is
completely unintuitive: idx >= SAVED_CMDLINES
There is no need for such casting games. Use a constant to mark
unmapped entries and check for that constant to make the code readable
and understandable.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: prevent overwrite of command line entries
When the tracer is stopped the command line recording continues to
record. The check for tracing_is_on() is not sufficient here as the
ringbuffer status is not affected by setting
debug/tracing/tracing_enabled to 0. On a non idle system this can
result in the loss of the command line information for the stopped
trace, which makes the trace harder to read and analyse.
Check tracer_enabled to allow further recording.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: feature to allow better serialized clock
This patch adds an option called "global-clock" that will allow
the tracer to switch to a slower but more accurate (across CPUs)
clock.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch adds a new function called ring_buffer_set_clock that
allows a tracer to assign its own clock source to the buffer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix for losing comms in trace
The command lines of tasks are cached at sched switch to not need
to record them at every trace point. Disabling the tracing on stops
the recording of traces, but does not stop the caching of command lines.
When the tracing is off the cache may overflow and cause the tracing
to show incorrect tasks matching the PIDs.
This patch disables prevents updates to the comm cache when the ring buffer
is off.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to one cause of incorrect comm outputs in trace
The spinlock only protected the creation of a comm <=> pid pair.
But it was possible that a reader could look up a pid, and get the
wrong comm because it had no locking.
This also required changing trace_find_cmdline to copy the comm cache
and not just send back a pointer to it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix crashes when tracing cpumasks
While ring-buffer allocation, the cpumasks are allocated too,
including the tracing cpumask and the per-cpu file mask handler.
But these cpumasks are freed accidentally just after.
Fix it.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237164303-11476-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix possible locking imbalance
In case of ring buffer resize failure, tracing_set_tracer forgot to
release trace_types_lock. Fix it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237151439-6755-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The binary_buffers directory in /debugfs/tracing held the files
to read the trace buffers in a binary format. This held one file
per CPU buffer. But we also have a per_cpu directory that holds
a way to read the pretty-print formats.
This patch moves the binary buffers into the per_cpu_directory:
# ls /debug/tracing/per_cpu/cpu1/
trace trace_pipe trace_pipe_raw
The new name is called "trace_pipe_raw". The binary buffers always
acted similar to trace_pipe, except that they produce raw data.
Requested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix callsites with dynamic format strings
Since its new binary implementation, trace_printk() internally uses static
containers for the format strings on each callsites. But the value is
assigned once at build time, which means that it can't take dynamic
formats.
So this patch unearthes the raw trace_printk implementation for the callers
that will need trace_printk to be able to carry these dynamic format
strings. The trace_printk() macro will use the appropriate implementation
for each callsite. Most of the time however, the binary implementation will
still be used.
The other impact of this patch is that mmiotrace_printk() will use the old
implementation because it calls the low level trace_vprintk and we can't
guess here whether the format passed in it is dynamic or not.
Some parts of this patch have been written by Steven Rostedt (most notably
the part that chooses the appropriate implementation for each callsites).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: do not confuse user on small trace buffer sizes
When the system boots up, the trace buffer is small to conserve memory.
It is only two pages per online CPU. When the tracer is used, it expands
to the default value.
This can confuse the user if they look at the buffer size and see only
7, but then later they see 1408.
# cat /debug/tracing/buffer_size_kb
7
# echo sched_switch > /debug/tracing/current_tracer
# cat /debug/tracing/buffer_size_kb
1408
This patch tries to help remove this confustion by showing that the
buffer has not been expanded.
# cat /debug/tracing/buffer_size_kb
7 (expanded: 1408)
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: prevent races with ring_buffer_expanded
This patch places the expanding of the tracing buffer under the
protection of the trace_types_lock mutex. It is highly unlikely
that there would be any contention, but better safe than sorry.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: cleanup
Some of the comments about the trace buffer resizing is gobbledygook.
And I wonder why people question if I'm a native English speaker.
This patch makes the comments make a bit more sense.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: save on memory
Currently, a ring buffer was allocated for each "possible_cpus". On
some systems, this is the same as NR_CPUS. Thus, if a system defined
NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless
ring buffers taking up space. With a default buffer of 3 megs, this
could be quite drastic.
This patch changes the ring buffer code to only allocate ring buffers
for online CPUs. If a CPU goes off line, we do not free the buffer.
This is because the user may still have trace data in that buffer
that they would like to look at.
Perhaps in the future we could add code to delete a ring buffer if
the CPU is offline and the ring buffer becomes empty.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to task live locking on reading trace_pipe on one CPU
The same code is used for both trace_pipe (all CPUS) and the per_cpu
trace_pipe file. When there is no data to read, it will check for
signals and wait on the trace wait queue.
The problem happens with the per_cpu wait. The trace_wait code checks
all CPUs. Thus, if there's data in another CPU buffer, then it will
exit the wait, without checking for signals or waiting on the wait queue.
It would then try to read the empty buffer, and since that will just
return nothing, then it will try to wait again. Unfortunately, that will
again fail due to there still being data in the other buffers. This
ends up with a live lock for the task.
This patch fixes the trace_wait to be aware that the iterator may only
be waiting on a single buffer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
To save memory, the tracer ring buffers are set to a minimum.
The activating of a trace expands the ring buffer size. This patch
adds this expanding, when an event is activated.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: less memory impact on systems not using tracer
When the kernel boots up that has tracing configured, it allocates
the default size of the ring buffer. This currently happens to be
1.4Megs per possible CPU. This is quite a bit of wasted memory if
the system is never using the tracer.
The current solution is to keep the ring buffers to a minimum size
until the user uses them. Once a tracer is piped into the current_tracer
the ring buffer will be expanded to the default size. If the user
changes the size of the ring buffer, it will take the size given
by the user immediately.
If the user adds a "ftrace=" to the kernel command line, then the ring
buffers will be set to the default size on initialization.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: prevent locking up by lockdep tracer
The lockdep tracer uses trace_vprintk and thus trace_vprintk can not
call back into lockdep without locking up.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
There existed a lot of <space><tab>'s in the tracing code. This
patch removes them.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: faster and lighter tracing
Now that we have trace_bprintk() which is faster and consume lesser
memory than trace_printk() and has the same purpose, we can now drop
the old implementation in favour of the binary one from trace_bprintk(),
which means we move all the implementation of trace_bprintk() to
trace_printk(), so the Api doesn't change except that we must now use
trace_seq_bprintk() to print the TRACE_PRINT entries.
Some changes result of this:
- Previously, trace_bprintk depended of a single tracer and couldn't
work without. This tracer has been dropped and the whole implementation
of trace_printk() (like the module formats management) is now integrated
in the tracing core (comes with CONFIG_TRACING), though we keep the file
trace_printk (previously trace_bprintk.c) where we can find the module
management. Thus we don't overflow trace.c
- changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries.
- change a bit trace_printk/trace_vprintk macros to support non-builtin formats
constants, and fix 'const' qualifiers warnings. But this is all transparent for
developers.
- etc...
V2:
- Rebase against last changes
- Fix mispell on the changelog
V3:
- Rebase against last changes (moving trace_printk() to kernel.h)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add a generic printk() for tracing, like trace_printk()
trace_bprintk() uses the infrastructure to record events on ring_buffer.
[ fweisbec@gmail.com: ported to latest -tip, made it work if
!CONFIG_MODULES, never free the format strings from modules
because we can't keep track of them and conditionnaly create
the ftrace format strings section (reported by Steven Rostedt) ]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: save on memory for tracing
Current tracers are typically using a struct(like struct ftrace_entry,
struct ctx_switch_entry, struct special_entr etc...)to record a binary
event. These structs can only record a their own kind of events.
A new kind of tracer need a new struct and a lot of code too handle it.
So we need a generic binary record for events. This infrastructure
is for this purpose.
[fweisbec@gmail.com: rebase against latest -tip, make it safe while sched
tracing as reported by Steven Rostedt]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
All file_operations structures should be constant. No one is going to
change them.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: cleanup
Use a more generic name - this also allows the prototype to move
to kernel.h and be generally available to kernel developers who
want to do some quick tracing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Both print_lat_fmt and print_trace_fmt do pretty much the same thing
except for one different function call. This patch consolidates the
two functions and adds an if statement to perform the difference.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
The trace and latency_trace function pointers are identical for
every tracer but the function tracer. The differences in the function
tracer are trivial (latency output puts paranthesis around parent).
This patch removes the latency_trace pointer and all prints will
now just use the trace output function pointer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Nikanth Karthikesan