The busy loop in rpmh_rsc_send_data() is written with the assumption
that the udelay will be preempted by the tcs_tx_done() irq handler when
the TCS slots are all full. This doesn't hold true when the calling
thread is an irqthread and the tcs_tx_done() irq is also an irqthread.
That's because kernel irqthreads are SCHED_FIFO and thus need to
voluntarily give up priority by calling into the scheduler so that other
threads can run.
I see RCU stalls when I boot with irqthreads on the kernel commandline
because the modem remoteproc driver is trying to send an rpmh async
message from an irqthread that needs to give up the CPU for the rpmh
irqthread to run and clear out tcs slots.
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-....: (1 GPs behind) idle=402/1/0x4000000000000002 softirq=2108/2109 fqs=4920
(t=21016 jiffies g=2933 q=590)
Task dump for CPU 0:
irq/11-smp2p R running task 0 148 2 0x00000028
Call trace:
dump_backtrace+0x0/0x154
show_stack+0x20/0x2c
sched_show_task+0xfc/0x108
dump_cpu_task+0x44/0x50
rcu_dump_cpu_stacks+0xa4/0xf8
rcu_sched_clock_irq+0x7dc/0xaa8
update_process_times+0x30/0x54
tick_sched_handle+0x50/0x64
tick_sched_timer+0x4c/0x8c
__hrtimer_run_queues+0x21c/0x36c
hrtimer_interrupt+0xf0/0x22c
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x114/0x25c
__handle_domain_irq+0x84/0xc4
gic_handle_irq+0xd0/0x178
el1_irq+0xbc/0x180
save_return_addr+0x18/0x28
return_address+0x54/0x88
preempt_count_sub+0x40/0x88
_raw_spin_unlock_irqrestore+0x4c/0x6c
___ratelimit+0xd0/0x128
rpmh_rsc_send_data+0x24c/0x378
__rpmh_write+0x1b0/0x208
rpmh_write_async+0x90/0xbc
rpmhpd_send_corner+0x60/0x8c
rpmhpd_aggregate_corner+0x8c/0x124
rpmhpd_set_performance_state+0x8c/0xbc
_genpd_set_performance_state+0xdc/0x1b8
dev_pm_genpd_set_performance_state+0xb8/0xf8
q6v5_pds_disable+0x34/0x60 [qcom_q6v5_mss]
qcom_msa_handover+0x38/0x44 [qcom_q6v5_mss]
q6v5_handover_interrupt+0x24/0x3c [qcom_q6v5]
handle_nested_irq+0xd0/0x138
qcom_smp2p_intr+0x188/0x200
irq_thread_fn+0x2c/0x70
irq_thread+0xfc/0x14c
kthread+0x11c/0x12c
ret_from_fork+0x10/0x18
This busy loop naturally lends itself to using a wait queue so that each
thread that tries to send a message will sleep waiting on the waitqueue
and only be woken up when a free slot is available. This should make
things more predictable too because the scheduler will be able to sleep
tasks that are waiting on a free tcs instead of the busy loop we
currently have today.
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200724211711.810009-1-sboyd@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Pull misc vfs updates from Al Viro:
"No common topic whatsoever in those, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: define inode flags using bit numbers
iov_iter: Move unnecessary inclusion of crypto/hash.h
dlmfs: clean up dlmfs_file_{read,write}() a bit
framework we just have some minor tweaks and a debugfs feature, so not much to
see there. The driver updates are fairly well split between AT91 and Qualcomm
clk support. Adding those two drivers together equals about 50% of the
diffstat. Otherwise, the big amount of work this time was on supporting
Broadcom's Raspberry Pi firmware clks. See below for some more highlights.
Core:
- Document clk_hw_round_rate() so it gets some more use
- Remove unused __clk_get_flags()
- Add a prepare/enable debugfs feature similar to rate setting
New Drivers:
- Add support for SAMA7G5 SoC clks
- Enable CPU clks on Qualcomm IPQ6018 SoCs
- Enable CPU clks on Qualcomm MSM8996 SoCs
- GPU clk support for Qualcomm SM8150 and SM8250 SoCs
- Audio clks on Qualcomm SC7180 SoCs
- Microchip Sparx5 DPLL clk
- Add support for the new Renesas RZ/G2H (R8A774E1) SoC
Updates:
- Make defines for bcm63xx-gate clks to use in DT
- Support BCM2711 SoC firmware clks
- Add HDMI clks for BCM2711 SoCs
- Add RTC related clks on Ingenic SoCs
- Support USB PHY clks on Ingenic SoCs
- Support gate clks on BCM6318 SoCs
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
- Use poll_timeout functions in Rockchip clk driver
- Support Rockchip rk3288w SoC variant
- Mark mac_lbtest critical on Rockchip rk3188
- Add CAAM clock support for i.MX vf610 driver
- Add MU root clock support for i.MX imx8mp driver
- Amlogic g12: add neural network accelerator clock sources
- Amlogic meson8: remove critical flag for main PLL divider
- Amlogic meson8: add video decoder clock gates
- Convert one more Renesas DT binding to json-schema
- Enhance critical clock handling on Renesas platforms to only consider
clocks that were enabled at boot time
-----BEGIN PGP SIGNATURE-----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=QLRg
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"It looks like a smaller batch of clk updates this time around.
In the core framework we just have some minor tweaks and a debugfs
feature, so not much to see there. The driver updates are fairly well
split between AT91 and Qualcomm clk support. Adding those two drivers
together equals about 50% of the diffstat.
Otherwise, the big amount of work this time was on supporting
Broadcom's Raspberry Pi firmware clks.
Highlights:
Core:
- Document clk_hw_round_rate() so it gets some more use
- Remove unused __clk_get_flags()
- Add a prepare/enable debugfs feature similar to rate setting
New Drivers:
- Add support for SAMA7G5 SoC clks
- Enable CPU clks on Qualcomm IPQ6018 SoCs
- Enable CPU clks on Qualcomm MSM8996 SoCs
- GPU clk support for Qualcomm SM8150 and SM8250 SoCs
- Audio clks on Qualcomm SC7180 SoCs
- Microchip Sparx5 DPLL clk
- Add support for the new Renesas RZ/G2H (R8A774E1) SoC
Updates:
- Make defines for bcm63xx-gate clks to use in DT
- Support BCM2711 SoC firmware clks
- Add HDMI clks for BCM2711 SoCs
- Add RTC related clks on Ingenic SoCs
- Support USB PHY clks on Ingenic SoCs
- Support gate clks on BCM6318 SoCs
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
- Use poll_timeout functions in Rockchip clk driver
- Support Rockchip rk3288w SoC variant
- Mark mac_lbtest critical on Rockchip rk3188
- Add CAAM clock support for i.MX vf610 driver
- Add MU root clock support for i.MX imx8mp driver
- Amlogic g12: add neural network accelerator clock sources
- Amlogic meson8: remove critical flag for main PLL divider
- Amlogic meson8: add video decoder clock gates
- Convert one more Renesas DT binding to json-schema
- Enhance critical clock handling on Renesas platforms to only
consider clocks that were enabled at boot time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits)
clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
ipq806x: gcc: add support for child probe
clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
clk: qcom: ipq8074: Add correct index for PCIe clocks
clk: <linux/clk-provider.h>: drop a duplicated word
clk: renesas: cpg-mssr: Add r8a774e1 support
dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
clk: Drop duplicate selection in Kconfig
clk: qcom: smd: Add support for MSM8992/4 rpm clocks
clk: qcom: ipq8074: Add missing clocks for pcie
dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
Replace HTTP links with HTTPS ones: Common CLK framework
clk: qcom: Add CPU clock driver for msm8996
dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
soc: qcom: Separate kryo l2 accessors from PMU driver
clk: meson: meson8b: add the vclk2_en gate clock
clk: meson: meson8b: add the vclk_en gate clock
clk: qcom: Fix return value check in apss_ipq6018_probe()
clk: bcm: dvp: Add missing module informations
clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
...
If CONFIG_SERIAL_EARLYCON is not set, gcc warns this:
drivers/soc/qcom/qcom-geni-se.c: In function 'geni_se_probe'
drivers/soc/qcom/qcom-geni-se.c:914:1: warning: label 'exit' defined but not used [-Wunused-label]
exit:
^~~~
Fixes: 048eb908a1 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200722020619.25988-1-yuehaibing@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix W=1 compile warnings (invalid kerneldoc):
drivers/soc/qcom/smd-rpm.c:35: warning: Function parameter or member 'dev' not described in 'qcom_smd_rpm'
drivers/soc/qcom/smd-rpm.c:99: warning: Function parameter or member 'state' not described in 'qcom_rpm_smd_write'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200729074415.28393-2-krzk@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Protection Domains (PD) have a mechanism to keep its resources
enabled until the PD down indication is acked. Reorder the PD state
indication ack so that clients get to release the relevant resources
before the PD goes down.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200701195954.9007-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
pdev struct doesn't exits for the devices whose status are disabled
from DT node, in such cases NULL is returned from 'of_find_device_by_node'
Later when we try to get drvdata from pdev struct NULL pointer dereference
is triggered.
Add a NULL check for return values to fix the issue.
We were hitting this issue when one of QUP is disabled.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 048eb908a1 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash")
Reported-by: Sai Prakash Ranjan <saipraka@codeaurora.org>
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Link: https://lore.kernel.org/r/1594996342-26964-1-git-send-email-akashast@codeaurora.org
[bjorn: s/wrapper_pdev/pdev/]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When using the geni-serial as console, its important to be
able to hit the lowest possible power state in suspend,
even with no_console_suspend.
The only thing that prevents it today on platforms like the sc7180
is the interconnect BW votes, which we certainly don't need when
the system is in suspend. So in the suspend handler mark them as
ACTIVE_ONLY (0x3) and on resume switch them back to the ALWAYS tag (0x7)
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1594704709-26072-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The driver provides kernel level API for other drivers
to access the MSM8996 L2 cache registers.
Separating the L2 access code from the PMU driver and
making it public to allow other drivers use it.
The accesses must be separated with a single spinlock,
maintained in this driver.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The header file linux/uio.h includes crypto/hash.h which pulls in
most of the Crypto API. Since linux/uio.h is used throughout the
kernel this means that every tiny bit of change to the Crypto API
causes the entire kernel to get rebuilt.
This patch fixes this by moving it into lib/iov_iter.c instead
where it is actually used.
This patch also fixes the ifdef to use CRYPTO_HASH instead of just
CRYPTO which does not guarantee the existence of ahash.
Unfortunately a number of drivers were relying on linux/uio.h to
provide access to linux/slab.h. This patch adds inclusions of
linux/slab.h as detected by build failures.
Also skbuff.h was relying on this to provide a declaration for
ahash_request. This patch adds a forward declaration instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
QUP core clock is shared among all the SE drivers present on particular
QUP wrapper, the system will reset(unclocked access) if earlycon used after
QUP core clock is put to 0 from other SE drivers before real console comes
up.
As earlycon can't vote for it's QUP core need, to fix this add ICC
support to common/QUP wrapper driver and put vote for QUP core from
probe on behalf of earlycon and remove vote during earlycon exit call.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1592908737-7068-3-git-send-email-akashast@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The write_tcs_reg_sync() may be called after timekeeping is suspended
so it's not OK to use ktime. The readl_poll_timeout_atomic() macro
implicitly uses ktime. This was causing a warning at suspend time.
Change to just loop 1000000 times with a delay of 1 us between loops.
This may give a timeout of more than 1 second but never less and is
safe even if timekeeping is suspended.
NOTE: I don't have any actual evidence that we need to loop here.
It's possibly that all we really need to do is just read the value
back to ensure that the pipes are cleaned and the looping/comparing is
totally not needed. I never saw the loop being needed in my tests.
However, the loop shouldn't hurt.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Fixes: 91160150ab ("soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()")
Reported-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200528074530.1.Ib86e5b406fe7d16575ae1bb276d650faa144b63c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Print sensible string instead of just "(null)" for unknown PMIC models.
Also as we are at it, do not let debugfs handler access past pmic_models
array.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200525164817.2938638-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently rpmh_invalidate() always returns success. Update its
return type to void.
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1592485553-29163-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
rpmh-rsc driver is fairly core to system and should not be removable
once its probed. However it allows to unbind driver from sysfs using
below command which results into a crash on sc7180.
echo 18200000.rsc > /sys/bus/platform/drivers/rpmh/unbind
Lets prevent unbind at runtime by setting suppress_bind_attrs flag.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1592808805-2437-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This introduces device managed versions of functions used to register
remoteproc devices, add support for remoteproc driver specific resource
control, enables remoteproc drivers to specify ELF class and machine for
coredumps. It integrates pm_runtime in the core for keeping resources
active while the remote is booted and holds a wake source while
recoverying a remote processor after a firmware crash.
It refactors the remoteproc device's allocation path to simplify the
logic, fix a few cleanup bugs and to not clone const strings onto the
heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
zero-length array is replaced with flexible-array.
A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
SM8250 gains support for audio, compute and sensor remoteprocs and the
Qualcomm SC7180 modem support is cleaned up and improved.
The Qualcomm glink subsystem-restart driver is merged into the main
glink driver, the Qualcomm sysmon driver is extended to properly notify
remote processors about all other remote processors' state transitions.
-----BEGIN PGP SIGNATURE-----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=4k54
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces device managed versions of functions used to register
remoteproc devices, add support for remoteproc driver specific
resource control, enables remoteproc drivers to specify ELF class and
machine for coredumps. It integrates pm_runtime in the core for
keeping resources active while the remote is booted and holds a wake
source while recoverying a remote processor after a firmware crash.
It refactors the remoteproc device's allocation path to simplify the
logic, fix a few cleanup bugs and to not clone const strings onto the
heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
zero-length array is replaced with flexible-array.
A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
SM8250 gains support for audio, compute and sensor remoteprocs and the
Qualcomm SC7180 modem support is cleaned up and improved.
The Qualcomm glink subsystem-restart driver is merged into the main
glink driver, the Qualcomm sysmon driver is extended to properly
notify remote processors about all other remote processors' state
transitions"
* tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits)
remoteproc: Fix an error code in devm_rproc_alloc()
MAINTAINERS: Add myself as reviewer for Ingenic rproc driver
remoteproc: ingenic: Added remoteproc driver
remoteproc: Add support for runtime PM
dt-bindings: Document JZ47xx VPU auxiliary processor
remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev()
remoteproc: Fix and restore the parenting hierarchy for vdev
remoteproc: Fall back to using parent memory pool if no dedicated available
remoteproc: Replace zero-length array with flexible-array
remoteproc: wcss: add support for rpmsg communication
remoteproc: core: Prevent system suspend during remoteproc recovery
remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function
remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs
remoteproc: qcom: pas: Add SM8250 PAS remoteprocs
dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs
remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region
dt-bindings: remoteproc: qcom: Use memory-region to reference memory
remoteproc: qcom: pas: Add SC7180 Modem support
...
These are updates to SoC specific drivers that did not have
another subsystem maintainer tree to go through for some
reason:
- Some bus and memory drivers for the MIPS P5600 based
Baikal-T1 SoC that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3,
Qualcomm MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas
RZ/G1H, and Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC
as a transport.
- Mediatek platforms now use a new driver for their "MMSYS"
hardware block that controls clocks and some other aspects
in behalf of the media and gpu drivers.
- Some Tegra processors have improved power management
support, including getting woken up by the PMIC and cluster
power down during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon,
Mediatek, and Tegra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=44Jc
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
The Qualcomm SPM cpuidle driver seems to be the last driver still
using the generic ARM CPUidle infrastructure.
Converting it actually allows us to simplify the driver,
and we end up being able to remove more lines than adding new ones:
- We can parse the CPUidle states in the device tree directly
with dt_idle_states (and don't need to duplicate that
functionality into the spm driver).
- Each "saw" device managed by the SPM driver now directly
registers its own cpuidle driver, removing the need for
any global (per cpu) state.
The device tree binding is the same, so the driver stays
compatible with all old device trees.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Attempting to compile rpmh-rsc.c as a module with TRACING enabled causes
a build error as no _rcuidle function is generated for tracepoints when
CONFIG_MODULE is set.
Attempts has been made, but no resolution has been agreed upon, so lets
revert this commit for now.
This reverts commit 1d3c6f86fd.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
It has been postulated that the pm_lock is bad for performance because
a CPU currently running rpmh_flush() could block other CPUs from
coming out of idle. Similarly CPUs coming out of / going into idle
all need to contend with each other for the spinlock just to update
the variable tracking who's in PM.
Let's optimize this a bit. Specifically:
- Use a count rather than a bitmask. This is faster to access and
also means we can use the atomic_inc_return() function to really
detect who the last one to enter PM was.
- Accept that it's OK if we race and are doing the flush (because we
think we're last) while another CPU is coming out of idle. As long
as we block that CPU if/when it tries to do an active-only transfer
we're OK.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.5.I295cb72bc5334a2af80313cbe97cb5c9dcb1442c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The rpmh-rsc code had both a driver-level lock (sometimes referred to
in comments as drv->lock) and a lock per-TCS. The idea was supposed
to be that there would be times where you could get by with just
locking a TCS lock and therefor other RPMH users wouldn't be blocked.
The above didn't work out so well.
Looking at tcs_write() the bigger drv->lock was held for most of the
function anyway. Only the __tcs_buffer_write() and
__tcs_set_trigger() calls were called without holding the drv->lock.
It actually turns out that in tcs_write() we don't need to hold the
drv->lock for those function calls anyway even if the per-TCS lock
isn't there anymore. From the newly added comments in the code, this
is because:
- We marked "tcs_in_use" under lock.
- Once "tcs_in_use" has been marked nobody else could be writing
to these registers until the interrupt goes off.
- The interrupt can't go off until we trigger w/ the last line
of __tcs_set_trigger().
Thus, from a tcs_write() point of view, the per-TCS lock was useless.
Looking at rpmh_rsc_write_ctrl_data(), only the per-TCS lock was held.
It turns out, though, that this function already needs to be called
with the equivalent of the drv->lock held anyway (we either need to
hold drv->lock as we will in a future patch or we need to know no
other CPUs could be running as happens today). Specifically
rpmh_rsc_write_ctrl_data() might be writing to a TCS that has been
borrowed for writing an active transation but it never checks this.
Let's eliminate this extra overhead and avoid possible AB BA locking
headaches.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.4.Ib8dccfdb10bf6b1fb1d600ca1c21d9c0db1ef746@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When a PM Notifier returns NOTIFY_BAD it doesn't get called with
CPU_PM_ENTER_FAILED. It only get called for CPU_PM_ENTER_FAILED if
someone else (further down the notifier chain) returns NOTIFY_BAD.
Handle this case by taking our CPU out of the list of ones that have
entered PM. Without this it's possible we could detect that the last
CPU went down (and we would flush) even if some CPU was alive. That's
not good since our flushing routines currently assume they're running
on the last CPU for mutual exclusion.
Fixes: 985427f997 ("soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.2.I1927d1bca2569a27b2d04986baf285027f0818a2@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Our switch statement doesn't have entries for CPU_CLUSTER_PM_ENTER,
CPU_CLUSTER_PM_ENTER_FAILED, and CPU_CLUSTER_PM_EXIT and doesn't have
a default. This means that we'll try to do a flush in those cases but
we won't necessarily be the last CPU down. That's not so ideal since
our (lack of) locking assumes we're on the last CPU.
Luckily this isn't as big a problem as you'd think since (at least on
the SoC I tested) we don't get these notifications except on full
system suspend. ...and on full system suspend we get them on the last
CPU down. That means that the worst problem we hit is flushing twice.
Still, it's good to make it correct.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 985427f997 ("soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.1.Ic7096b3b9b7828cdd41cd5469a6dee5eb6abf549@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We can make some of the register access functions more readable by
factoring out the calculations a little bit.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200415095953.v3.1.Ic70288f256ff0be65cac6a600367212dfe39f6c9@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch adds missing SoC IDs for MSM8936/39 and
their APQ variants.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200511212733.214464-1-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In all but the very special case of a system with _only_ glink_rpm,
GLINK is dependent on glink_ssr, so move it to rpmsg and combine it with
qcom_glink_native in the new qcom_glink kernel module.
Acked-by: Chris Lew <clew@codeaurora.org>
Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20200423003736.2027371-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Rather than carrying a special purpose blocking notifier for glink_ssr
in remoteproc's qcom_common.c, move it into glink_ssr so allow wider
reuse of the common one.
The rpmsg glink header file is used in preparation for the next patch.
Acked-by: Chris Lew <clew@codeaurora.org>
Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20200423003736.2027371-3-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The patch fbe639b44a82: "soc: qcom: Introduce Protection Domain
Restart helpers" leads to the following static checker warning:
drivers/soc/qcom/pdr_interface.c:158 pdr_register_listener()
'(resp.curr_state < (-((~0 >> 1)) - 1)) => (s32min-s32max < s32min)'
These are casted to int so they can't be outside of int range.
Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200415062955.21439-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Adding an item into the cache should never be able to make the cache
cleaner. Use "|=" rather than "=" to update the dirty flag.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Thanks, Maulik
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: bb7000677a ("soc: qcom: rpmh: Update dirty flag only when data changes")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200417141531.1.Ia4b74158497213eabad7c3d474c50bfccb3f342e@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Read the slv_id properly by making sure the 16-bit number is endian
swapped from little endian to CPU native before we read it to figure out
what to print for the human readable name. Otherwise we may just show
that all the elements in the cmd-db are "Unknown" which isn't right.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200417000645.234693-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The top few bits aren't relevant to pad out because they're always zero.
Let's just print 5 digits instead of 8 so that it's a little shorter and
more readable.
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Suggested-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200415192916.78339-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We pass the result of sizeof() here to tell the printk format specifier
how many bytes to print. That expects an int though and sizeof() isn't
that type. Cast to int to silence this warning:
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_debugfs_dump':
drivers/soc/qcom/cmd-db.c:281:30: warning: field width specifier '*' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=]
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Fixes: d6815c5c43 ("soc: qcom: cmd-db: Add debugfs dumping file")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200415062033.66406-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch allow the rpmpd driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.
Ideally, it would include a remove hook and related logic, but
apparently the genpd code isn't able to track usage and cleaning
things up? (See: https://lkml.org/lkml/2019/1/24/38)
So making it a permenent module at least improves things slightly
over requiring it to be a built in driver.
Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200326224459.105170-2-john.stultz@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch allow the rpmhpd driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.
Ideally, it would include a remove hook and related logic, but
apparently the genpd code isn't able to track usage and cleaning
things up?
So making it a permenent module at least improves things slightly
over requiring it to be a built in driver.
Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200326224459.105170-4-john.stultz@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch allow the rpmh driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.
Ideally, it would include a remove hook and related logic, but
the rpmh driver is fairly core to the system, so once its loaded
with almost anythign else to get the system to go, the dependencies
are not likely to ever also be removed.
So making it a permenent module at least improves things slightly
over requiring it to be a built in driver.
Acked-by: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200326224459.105170-3-john.stultz@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The RSC_DRV_IRQ_ENABLE, RSC_DRV_IRQ_STATUS, and RSC_DRV_IRQ_CLEAR
registers are not part of TCS 0. Let's not pretend that they are by
using read_tcs_reg() and write_tcs_reg() and passing a bogus tcs_id of
0. We could introduce a new wrapper for these registers but it
wouldn't buy us much. Let's just read/write directly.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.10.I2adf93809c692d0b673e1a86ea97c45644aa8d97@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Auditing tcs_invalidate() made me worried. Specifically I saw that it
used spin_lock(), not spin_lock_irqsave(). That always worries me
unless I can trace for sure that I'm in the interrupt handler or that
someone else already disabled interrupts.
Looking more at it, there is actually no reason for these locks
anyway. Specifically the only reason you'd ever call
rpmh_rsc_invalidate() is if you cared that the sleep/wake TCSes were
empty. That means that they need to continue to be empty even after
rpmh_rsc_invalidate() returns. The only way that can happen is if the
caller already has done something to keep all other RPMH users out.
It should be noted that even though the caller is only worried about
making sleep/wake TCSes empty, they also need to worry about stopping
active-only transfers if they need to handle the case where
active-only transfers might borrow the wake TCS.
At the moment rpmh_rsc_invalidate() is only called in PM code from the
last CPU. If that later changes the caller will still need to solve
the above problems themselves, so these locks will never be useful.
Continuing to audit tcs_invalidate(), I found a bug. The function
didn't properly check for a borrowed TCS if we hadn't recently written
anything into the TCS. Specifically, if we've never written to the
WAKE_TCS (or we've flushed it recently) then tcs->slots is empty.
We'll early-out and we'll never call tcs_is_free().
I thought about fixing this bug by either deleting the early check for
bitmap_empty() or possibly only doing it if we knew we weren't on a
TCS that could be borrowed. However, I think it's better to just
delete the checks.
As argued above it's up to the caller to make sure that all other
users of RPMH are quiet before tcs_invalidate() is called. Since
callers need to handle the zero-active-TCS case anyway that means they
need to make sure that the active-only transfers are quiet before
calling too. The one way tcs_invalidate() gets called today is
through rpmh_rsc_cpu_pm_callback() which calls
rpmh_rsc_ctrlr_is_busy() to handle this. When we have another path to
get to tcs_invalidate() it will also need to come up with something
similar and it won't need this extra check either. If we later find
some code path that actually needs this check back in (and somehow
manages to be race free) we can always add it back in.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.9.I07c1f70e0e8f2dc0004bd38970b4e258acdc773e@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The calls rpmh_rsc_write_ctrl_data() and rpmh_rsc_send_data() are only
ever called from rpmh.c. We know that rpmh.c already error checked
the message. There's no reason to do it again in rpmh-rsc.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.8.I8e187cdfb7a31f5bb7724f1f937f2862ee464a35@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
tcs_is_free() had two checks in it: does the software think that the
TCS is free and does the hardware think that the TCS is free. I
couldn't figure out in which case the hardware could think that a TCS
was in-use but software thought it was free. Apparently there is no
case and the extra check can be removed. This apparently has already
been done in a downstream patch.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.7.Icf2213131ea652087f100129359052c83601f8b0@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
I've been pouring through the rpmh-rsc code and trying to understand
it. Document everything to the best of my ability. All documentation
here is strictly from code analysis--no actual knowledge of the
hardware was used. If something is wrong in here I either
misunderstood the code, had a typo, or the code has a bug in it
leading to my incorrect understanding.
In a few places here I have documented things that don't make tons of
sense. A future patch will try to address this. While this means I'm
adding comments / todos and then later fixing them in the series, it
seemed more urgent to get things documented first so that people could
understand the later patches.
Any comments I adjusted I also tried to make match kernel-doc better.
Specifically:
- kernel-doc says do not leave a blank line between the function
description and the arguments
- kernel-doc examples always have things starting w/ a capital and
ending with a period.
This should be a no-op. It's just comment changes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200413100321.v4.6.I52653eb85d7dc8981ee0dafcd0b6cc0f273e9425@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The "cmd_cache" in RPMH wasn't terribly sensible. Specifically:
- The current code doesn't really detect "conflicts" properly any case
where the sequence being checked has more than one entry. One
simple way to see this in the current code is that if cmd[0].addr
isn't found then cmd[1].addr is never checked.
- The code attempted to use the "cmd_cache" to update an existing
message in a sleep/wake TCS with new data. The goal appeared to be
to update part of a TCS while leaving the rest of the TCS alone. We
never actually do this. We always fully invalidate and re-write
everything.
- If/when we try to optimize things to not fully invalidate / re-write
every time we update the TCSes we'll need to think it through very
carefully. Specifically requirement of find_match() that the new
sequence of addrs must match exactly the old sequence of addrs seems
inflexible. It's also not documented in rpmh_write() and
rpmh_write_batch(). In any case, if we do decide to require updates
to keep the exact same sequence and length then presumably the API
and data structures should be updated to understand groups more
properly. The current algorithm doesn't really keep track of the
length of the old sequence and there are several boundary-condition
bugs because of that. Said another way: if we decide to do
something like this in the future we should start from scratch and
thus find_match() isn't useful to keep around.
This patch isn't quite a no-op. Specifically:
- It should be a slight performance boost of not searching through so
many arrays.
- The old code would have done something useful in one case: it would
allow someone calling rpmh_write() to override the data that came
from rpmh_write_batch(). I don't believe that actually happens in
reality.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.5.I6d3d0a3ec810dc72ff1df3cbf97deefdcdeb8eef@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The get_tcs_of_type() function doesn't provide any value. It's not
conceptually difficult to access a value in an array, even if that
value is in a structure and we want a pointer to the value. Having
the function in there makes me feel like it's doing something fancier
like looping or searching. Remove it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.4.Ia348ade7c6ed1d0d952ff2245bc854e5834c8d9a@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
I was trying to write documentation for the functions in rpmh-rsc and
I got to tcs_ctrl_write(). The documentation for the function would
have been: "This is the core of rpmh_rsc_write_ctrl_data(); all the
caller does is error-check and then call this".
Having the error checks in a separate function doesn't help for
anything since:
- There are no other callers that need to bypass the error checks.
- It's less documenting. When I read tcs_ctrl_write() I kept
wondering if I need to handle cases other than ACTIVE_ONLY or cases
with more commands than could fit in a TCS. This is obvious when
the error checks and code are together.
- The function just isn't that long, so there's no problem
understanding the combined function.
Things were even more confusing because the two functions names didn't
make obvious (at least to me) their relationship.
Simplify by folding one function into the other.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.3.Ie88ce5ccfc0c6055903ccca5286ae28ed3b85ed3@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Perhaps it's just me, it took a really long time to understand what
the register layout of rpmh-rsc was just from the #defines. Let's add
a bunch of comments describing which blocks are part of other blocks.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200413100321.v4.2.Iaddc29b72772e6ea381238a0ee85b82d3903e5f2@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch makes two changes, both of which should be no-ops:
1. Make read_tcs_reg() / read_tcs_cmd() symmetric to write_tcs_reg() /
write_tcs_cmd().
2. Change the order of operations in the above functions to make it
more obvious to me what the math is doing. Specifically first you
want to find the right TCS, then the right register, and then
multiply by the command ID if necessary.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.1.I1b754137e8089e46cf33fc2ea270734ec3847ec4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When there are more than one WAKE TCS available and there is no dedicated
ACTIVE TCS available, invalidating all WAKE TCSes and waiting for current
transfer to complete in first WAKE TCS blocks using another free WAKE TCS
to complete current request.
Remove rpmh_rsc_invalidate() to happen from tcs_write() when WAKE TCSes
is re-purposed to be used for Active mode. Clear only currently used
WAKE TCS's register configuration.
Fixes: 2de4b8d33e (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-7-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
TCS can be re-purposed to send active requests. Once the active requests
are sent and response is received, the active mode configuration needs
to be cleared so that controller can use wake TCS for sending wake
requests.
Introduce enable_tcs_irq() to enable completion IRQ for repurposed TCSes.
Fixes: 2de4b8d33e (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
[mkshah: call enable_tcs_irq() within drv->lock, update commit message]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-6-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add changes to invoke rpmh flush() from CPU PM notification.
This is done when the last the cpu is entering deep CPU idle
states and controller is not busy.
Controllers that have 'HW solver' mode like display RSC do not need
to register for CPU PM notification. They may be in autonomous mode
executing low power mode and do not require rpmh_flush() to happen
from CPU PM notification.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-5-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
TCSes have previously programmed data when rpmh_flush() is called.
This can cause old data to trigger along with newly flushed.
Fix this by cleaning SLEEP and WAKE TCSes before new data is flushed.
With this there is no need to invoke rpmh_rsc_invalidate() call from
rpmh_invalidate().
Simplify rpmh_invalidate() by moving invalidate_batch() inside.
Fixes: 600513dfee ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-4-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently rpmh ctrlr dirty flag is set for all cases regardless of data
is really changed or not. Add changes to update dirty flag when data is
changed to newer values. Update dirty flag everytime when data in batch
cache is updated since rpmh_flush() may get invoked from any CPU instead
of only last CPU going to low power mode.
Also move dirty flag updates to happen from within cache_lock and remove
unnecessary INIT_LIST_HEAD() call and a default case from switch.
Fixes: 600513dfee ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-3-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The function platform_get_irq() can log an error already. Thus omit a
redundant message for the exception handling in the calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/eb92fcfb-6181-1f9d-2601-61e5231bd892@web.de
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Looks like SoC ID is not exported to sysfs for some reason.
This patch adds it!
This is mostly used by userspace libraries like Snapdragon
Neural Processing Engine (SNPE) SDK for checking supported SoC info.
Fixes: efb448d0a3 ("soc: qcom: Add socinfo driver")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200319121418.5180-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
QCOM_APR selects QCOM_PDR_HELPERS, which in turn selects
QCOM_QMI_HELPERS, which depends on NET. So ensure that APR's
dependencies are met by making it depend on NET as well.
Fixes: 8347356626 ("soc: qcom: apr: Add avs/audio tracking functionality")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use PDR helper functions to track the protection domains that the apr
services are dependent upon on SDM845 SoC, specifically the "avs/audio"
service running on ADSP Q6.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200312120842.21991-4-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Qualcomm SoCs (starting with MSM8998) allow for multiple protection domains
to run on the same Q6 sub-system. This allows for services like ATH10K WLAN
FW to have their own separate address space and crash/recover without
disrupting the modem and other PDs running on the same sub-system. The PDR
helpers introduces an abstraction that allows for tracking/controlling the
life cycle of protection domains running on various Q6 sub-systems.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200312120842.21991-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is a single character that we're printing out. Use seq_putc() for
that to simplify the code.
Cc: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200309185123.65265-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This tracepoint is hit now that we call into the rpmh code from the cpu
idle path. Let's move this to be an rcuidle tracepoint so that we avoid
the RCU idle splat below
=============================
WARNING: suspicious RCU usage
5.4.10 #68 Tainted: G S
-----------------------------
drivers/soc/qcom/trace-rpmh.h:72 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 2, debug_locks = 1
RCU used illegally from extended quiescent state!
5 locks held by swapper/2/0:
#0: ffffff81745d6ee8 (&(&genpd->slock)->rlock){+.+.}, at: genpd_lock_spin+0x1c/0x2c
#1: ffffff81745da6e8 (&(&genpd->slock)->rlock/1){....}, at: genpd_lock_nested_spin+0x24/0x34
#2: ffffff8174f2ca20 (&(&genpd->slock)->rlock/2){....}, at: genpd_lock_nested_spin+0x24/0x34
#3: ffffff8174f2c300 (&(&drv->client.cache_lock)->rlock){....}, at: rpmh_flush+0x48/0x24c
#4: ffffff8174f2c150 (&(&tcs->lock)->rlock){+.+.}, at: rpmh_rsc_write_ctrl_data+0x74/0x270
stack backtrace:
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G S 5.4.10 #68
Call trace:
dump_backtrace+0x0/0x174
show_stack+0x20/0x2c
dump_stack+0xc8/0x124
lockdep_rcu_suspicious+0xe4/0x104
__tcs_buffer_write+0x230/0x2d0
rpmh_rsc_write_ctrl_data+0x210/0x270
rpmh_flush+0x84/0x24c
rpmh_domain_power_off+0x78/0x98
_genpd_power_off+0x40/0xc0
genpd_power_off+0x168/0x208
genpd_power_off+0x1e0/0x208
genpd_power_off+0x1e0/0x208
genpd_runtime_suspend+0x1ac/0x220
__rpm_callback+0x70/0xfc
rpm_callback+0x34/0x8c
rpm_suspend+0x218/0x4a4
__pm_runtime_suspend+0x88/0xac
psci_enter_domain_idle_state+0x3c/0xb4
cpuidle_enter_state+0xb8/0x284
cpuidle_enter+0x38/0x4c
call_cpuidle+0x3c/0x68
do_idle+0x194/0x260
cpu_startup_entry+0x24/0x28
secondary_start_kernel+0x150/0x15c
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Fixes: a65a397f24 ("cpuidle: psci: Add support for PM domains by using genpd")
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200115013751.249588-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
QMI helpers are not always used by Qualcomm platforms. One of the
exceptions is the external modems available in near future.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200220095854.4804-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In some device memory used by msm_qmp, there can be an early ack of a
write to memory succeeding. This may cause the outgoing interrupt to be
triggered before the msgram reflects the write.
Add a readback to ensure the data is flushed to device memory before
triggering the ipc interrupt.
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Link: https://lore.kernel.org/r/1579681454-1229-1-git-send-email-aneela@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
During the probe the task is waiting in TASK_UNINTERRUPTIBLE state which
cannot be woken-up by wake_up_interruptible_all() function.
Use wake_up_all() to wake-up both TASK_UNINTERRUPTIBLE and
TASK_INTERRUPTIBLE state tasks.
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Link: https://lore.kernel.org/r/1579681417-1155-1-git-send-email-aneela@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
rpmh_flush() was exported with the idea that an external entity
operation during CPU idle would know when to flush the sleep and wake
TCS. Since, this is not the case when defining a power domain for the
RSC. Remove the function export and instead allow the function to be
called internally.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1580736940-6985-3-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Device argument matches with dev variable declared in RPMH message.
Compiler reports error when the argument is NULL since the argument
matches the name of the property. Rename dev argument to device to
fix this.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1580736940-6985-2-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The 'active_only' attribute was accidentally never set to true for any
power domains meaning that all the code handling this attribute was
dead.
NOTE that the RPM power domain code (as opposed to the RPMh one) gets
this right.
Acked-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 279b7e8a62 ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20190214173633.211000-1-dianders@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20191120133925.13712-1-krzk@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
If a client comes up early in the boot process (perhaps was a built-in
driver), qmi_handle_init() will likely fail with a EAFNOSUPPORT since the
underlying ipc router hasn't init'd and registered the address family.
This should not be a fatal error since chances are, the router will come
up later, so recode the error to EPROBE_DEFER so that clients will retry
later.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191106230511.1290-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting
-----BEGIN PGP SIGNATURE-----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=3cs2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"Rob pointed out I missed his pull request for msm-next, it's been in
next for a while outside of my tree so shouldn't cause any unexpected
issues, it has some OCMEM support in drivers/soc that is acked by
other maintainers as it's outside my tree.
Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with
some tegra, omap, mgag200 and one core fix.
Summary:
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting"
* tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits)
drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()
drm/omap: fix dma_addr refcounting
drm/tegra: Run hub cleanup on ->remove()
drm/tegra: sor: Make the +5V HDMI supply optional
drm/tegra: Silence expected errors on IOMMU attach
drm/tegra: vic: Export module device table
drm/tegra: sor: Implement system suspend/resume
drm/tegra: Use proper IOVA address for cursor image
drm/tegra: gem: Remove premature import restrictions
drm/tegra: gem: Properly pin imported buffers
drm/tegra: hub: Remove bogus connection mutex check
ia64: agp: Replace empty define with do while
agp: Add bridge parameter documentation
agp: remove unused variable num_segments
agp: move AGPGART_MINOR to include/linux/miscdevice.h
agp: remove unused variable size in agp_generic_create_gatt_table
drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n
drm/radeon: fix r1xx/r2xx register checker for POT textures
drm/amdgpu: fix GFX10 missing CSIB set(v3)
drm/amdgpu: should stop GFX ring in hw_fini
...
Thermal framework takes 0 as the lowest/default state for a
cooling/warming device. The current code has the order inverted with 1
corresponding to lowest state in hardware and 0 the highest state.
Invert this for a better fit with the thermal framework.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is now a global variable that we're modifying to fix the name.
That isn't terribly thread safe and it's not necessary to be a global so
let's just move this to a local variable instead. This saves space in
the symtab and actually reduces kernel image size because the regmap
config is large and we can replace the initialization of that structure
with a memset and a few member assignments.
Cc: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We'll end up with debugfs collisions if we don't give names to the
regmaps created by this driver. Change the name of the config before
registering it so we don't collide in debugfs.
Fixes: 7f9c136216 ("soc: qcom: Add broadcast base for Last Level Cache Controller (LLCC)")
Cc: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
commit 99356b03b4 ("soc: qcom: Make llcc-qcom a generic driver") move
these out of llcc-qcom.h, make the building fails:
drivers/edac/qcom_edac.c:86:40: error: array type has incomplete element type struct llcc_edac_reg_data
static const struct llcc_edac_reg_data edac_reg_data[] = {
^~~~~~~~~~~~~
drivers/edac/qcom_edac.c:87:3: error: array index in non-array initializer
[LLCC_DRAM_CE] = {
^~~~~~~~~~~~
drivers/edac/qcom_edac.c:87:3: note: (near initialization for edac_reg_data)
drivers/edac/qcom_edac.c:88:3: error: field name not in record or union initializer
.name = "DRAM Single-bit",
...
drivers/edac/qcom_edac.c:169:51: warning: struct llcc_drv_data declared inside parameter
list will not be visible outside of this definition or declaration
qcom_llcc_clear_error_status(int err_type, struct llcc_drv_data *drv)
^~~~~~~~~~~~~
This patch move the needed definitions back to include.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 99356b03b4 ("soc: qcom: Make llcc-qcom a generic driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The OCMEM driver handles allocation and configuration of the On Chip
MEMory that is present on some Snapdragon SoCs. Devices which have
OCMEM do not have GMEM inside the GPU core, so the GPU must instead
use OCMEM to be functional. Since the GPU is currently the only OCMEM
user with an upstream driver, this is just a minimal implementation
sufficient for statically allocating to the GPU it's chunk of OCMEM.
This driver currently does not read the gmu-sram node that is described
in the device tree bindings. The starting memory address of the GPU's
reserved memory region is hardcoded to zero to match what the hardware
expects. The driver can be updated to read the reserved memory regions
from device tree once other users of OCMEM are added upstream.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Co-developed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Gabriel Francisco <frc.gabrielgmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The MSM8956/76 SoCs have two main voltage-level power domains, VDD_CX
and VDD_MX, which also have their own voltage-floor-level (VFL)
corner.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add a compatible for the RPM on the Qualcomm MSM8976 platform:
this is also valid for MSM8956 and their APQ variants.
Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Register a platform device to handle the communication of bus bandwidth
requests with the remote processor. The interconnect proxy device is part
of this remote processor (RPM) hardware. Let's create a icc-smd-rpm proxy
child device to represent the bus throughput functionality that is provided
by the RPM.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This makes way for adding future llcc versions.
Also pull out the llcc-qcom specific definitions from includes.
Includes path now contains the only definitions that are
to be exposed to other subsystems.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The cleaning up was done without changing the driver file name
to ensure a cleaner bisect. Change the file name now to facilitate
making the driver generic in subsequent patch.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A single file should suffice the need to program the llcc for
various platforms. Get rid of sdm845 specific driver file to
make way for a more generic driver.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The branch contains driver changes that are tightly
connected to SoC specific code. Aside from smaller
cleanups and bug fixes, here is a list of the notable
changes.
New device drivers:
- The Turris Mox router has a new "moxtet" bus driver
for its on-board pluggable extension bus. The
same platform also gains a firmware driver.
- The Samsung Exynos family gains a new Chipid driver
exporting using the soc device sysfs interface
- A similar socinfo driver for Qualcomm Snapdragon
chips.
- A firmware driver for the NXP i.MX DSP IPC protocol
using shared memory and a mailbox
Other changes:
- The i.MX reset controller driver now supports the
NXP i.MX8MM chip
- Amlogic SoC specific drivers gain support for
the S905X3 and A311D chips
- A rework of the TI Davinci framebuffer driver to
allow important cleanups in the platform code
- A couple of device drivers for removed ARM SoC
platforms are removed. Most of the removals were
picked up by other maintainers, this contains
whatever was left.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lxFi
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This contains driver changes that are tightly connected to SoC
specific code. Aside from smaller cleanups and bug fixes, here is a
list of the notable changes.
New device drivers:
- The Turris Mox router has a new "moxtet" bus driver for its
on-board pluggable extension bus. The same platform also gains a
firmware driver.
- The Samsung Exynos family gains a new Chipid driver exporting using
the soc device sysfs interface
- A similar socinfo driver for Qualcomm Snapdragon chips.
- A firmware driver for the NXP i.MX DSP IPC protocol using shared
memory and a mailbox
Other changes:
- The i.MX reset controller driver now supports the NXP i.MX8MM chip
- Amlogic SoC specific drivers gain support for the S905X3 and A311D
chips
- A rework of the TI Davinci framebuffer driver to allow important
cleanups in the platform code
- A couple of device drivers for removed ARM SoC platforms are
removed. Most of the removals were picked up by other maintainers,
this contains whatever was left"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
bus: uniphier-system-bus: use devm_platform_ioremap_resource()
soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
firmware: ti_sci: Allow for device shared and exclusive requests
bus: imx-weim: remove incorrect __init annotations
fbdev: remove w90x900/nuc900 platform drivers
spi: remove w90x900 driver
net: remove w90p910-ether driver
net: remove ks8695 driver
firmware: turris-mox-rwtm: Add sysfs documentation
firmware: Add Turris Mox rWTM firmware driver
dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
bus: moxtet: fix unsigned comparison to less than zero
bus: moxtet: remove set but not used variable 'dummy'
ARM: scoop: Use the right include
dt-bindings: power: add Amlogic Everything-Else power domains bindings
soc: amlogic: Add support for Everything-Else power domains controller
fbdev: da8xx: use resource management for dma
fbdev: da8xx-fb: drop a redundant if
fbdev: da8xx-fb: use devm_platform_ioremap_resource()
...
When booting with ACPI, the Geni Serial Engine is not set as the I2C/SPI
parent and thus, the wrapper (parent device) is unassigned. This causes
the kernel to crash with a null dereference error.
Link: https://lore.kernel.org/r/20190905082555.15020-1-lee.jones@linaro.org
Fixes: 8bc529b253 ("soc: qcom: geni: Add support for ACPI")
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update max processor count to reflect the number of
co-processors on SC7180 SoCs.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Introduce fall through annotations in the switch statements of
socinfo_debugfs_init() to silence compiler warnings.
Acked-by: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Fixes: 9c84c1e786 ("soc: qcom: socinfo: Expose custom attributes")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The AOSS QMP driver is extended to communicate with the additional
resources. These resources are then registered as cooling devices
with the thermal framework.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The socinfo driver provides information about version of the various
images loaded in the system. Expose this to user space for debugging
purpose.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm socinfo provides a number of additional attributes,
add these to the socinfo driver and expose them via debugfs
functionality.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm socinfo driver exposes information about the SoC, its
version and its serial number to user space.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Imran Khan <kimran@codeaurora.org>
[Bjorn: Extract code to platform_driver, split patch in multiple]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[Vaishali: Simplify declarations, introduce qcom_socinfo struct, Fix
memory leak, Remove extra code and Misc code refactoring]
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
- A driver for SCU (system control) on NXP i.MX8QXP
- Qualcomm Always-on Subsystem messaging driver (AOSS QMP)
- Qualcomm PM support for MSM8998
- Support for a newer version of DRAM PHY driver for Broadcom (DPFE)
- Reset controller support for Bitmain BM1880
- TI SCI (System Control Interface) support for CPU control on AM654
processors
- More TI sysc refactoring and rework
-----BEGIN PGP SIGNATURE-----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=ek+j
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
- A driver for SCU (system control) on NXP i.MX8QXP
- Qualcomm Always-on Subsystem messaging driver (AOSS QMP)
- Qualcomm PM support for MSM8998
- Support for a newer version of DRAM PHY driver for Broadcom (DPFE)
- Reset controller support for Bitmain BM1880
- TI SCI (System Control Interface) support for CPU control on AM654
processors
- More TI sysc refactoring and rework"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits)
reset: remove redundant null check on pointer dev
soc: rockchip: work around clang warning
dt-bindings: reset: imx7: Fix the spelling of 'indices'
soc: imx: Add i.MX8MN SoC driver support
soc: aspeed: lpc-ctrl: Fix probe error handling
soc: qcom: geni: Add support for ACPI
firmware: ti_sci: Fix gcc unused-but-set-variable warning
firmware: ti_sci: Use the correct style for SPDX License Identifier
soc: imx8: Use existing of_root directly
soc: imx8: Fix potential kernel dump in error path
firmware/psci: psci_checker: Park kthreads before stopping them
memory: move jedec_ddr.h from include/memory to drivers/memory/
memory: move jedec_ddr_data.c from lib/ to drivers/memory/
MAINTAINERS: Remove myself as qcom maintainer
soc: aspeed: lpc-ctrl: make parameter optional
soc: qcom: apr: Don't use reg for domain id
soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
memory: tegra: Fix -Wunused-const-variable
firmware: tegra: Early resume BPMP
soc/tegra: Select pinctrl for Tegra194
...
This adds support for the STM32 remoteproc, additional i.MX platforms
with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP. Initial
support for vendor specific resource table entries and support for
unprocessed Qualcomm firmware files.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl0uGwsbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FVhcQALBcuPOo2nBQEiOvgS79
0kVBSdUxw6+mI4EFLfQPeSTtGGrSK5/oZBmYhdv+HEDu6CLG1DS+6PZyCjhqdDsU
xjeTIkfe4RDAwnqlGxqK7OyeslAUe91kr0FDaS0XyajhQ+urI8N9Ou/JQDEZKArl
lpuxGmjWASeIbO3TC/p4OhyOU6yqqlyxlv9x/kJnF+PhDfdK1tezvgmLvCDtnD9y
gtYMzSz9txQCXMJmUaDFeUrMph6/Eo2Zn9rYyen5fDzqAXBys7nfH2fbDcbNK1fy
qgjWDjUxENeoZEuohIFn2Dg3egr6rF9TQQvM4uoAoKlS6+yEvTiE8g122BJxVGd3
BOmWK44hTpV1qAGfTivGOH3g/Q9pxI22a17t1BTxcHIYcmMBxERHAVRQ/wbwXRDp
qEv4HUuvciMSjonf8pW3GuuOny9jeTird5q8e3gTNA/s6aESm/YoynwWF3LmNZBo
XePc5sP4oz9HGJKS/SUu0/H6d1/YqOXOwVBmlTl4L0ErWOpaeGMinJQvSRHb0rL2
BgL8bADxFJGM0ITeIA5CpzZzbbbZSmPqxOBhcU+a/PnRL8zVWJOpSCMLe04vrQNT
9lVXAxmcRZjq80fbfyjqomyaT5N5Yvvv6dIz2AtCnAOEynHLnJq/dd5eX840l3RC
1wXvNF4l0rzYm0yYHr0+oQXQ
=iqXq
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.3' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for the STM32 remoteproc, additional i.MX platforms
with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP.
Also initial support for vendor specific resource table entries and
support for unprocessed Qualcomm firmware files"
* tag 'rproc-v5.3' of git://github.com/andersson/remoteproc:
remoteproc: stm32: fix building without ARM SMCC
remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER
remoteproc: copy parent dma_pfn_offset for vdev
remoteproc: qcom: q6v5-mss: Support loading non-split images
soc: qcom: mdt_loader: Support loading non-split images
remoteproc: stm32: add an ST stm32_rproc driver
dt-bindings: remoteproc: add bindings for stm32 remote processor driver
dt-bindings: stm32: add bindings for ML-AHB interconnect
remoteproc: Use struct_size() helper
remoteproc: add vendor resources handling
remoteproc: imx: Fix typo in "failed"
remoteproc: imx: Broaden the Kconfig selection logic
remoteproc,rpmsg: add missing MAINTAINERS file entries
remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP
dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
In some software releases the firmware images are not split up with each
loadable segment in it's own file. Check the size of the loaded firmware
to see if it still contains each segment to be loaded, before falling
back to the split-out segments.
Acked-by: Andy Gross <agross@kernel.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* Add ACPI support to Qualcomm GENI SE
* Update Qualcomm Maintainers entry to remove David Brown as maintainer and
fixup typos and incorrect DT file entry
* Fixup APR domain id usage and making callbacks in non-atomic context
* Add AOSS QMP driver and bindings
* Add power domains for MSM8998 and QCS404 in QCOM RPMPD
* Add corner macros, max state support, and fixups for setting performance state
for Qcom RPMPD
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JunO
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm ARM Based Driver Updates for v5.3
* Add ACPI support to Qualcomm GENI SE
* Update Qualcomm Maintainers entry to remove David Brown as maintainer and
fixup typos and incorrect DT file entry
* Fixup APR domain id usage and making callbacks in non-atomic context
* Add AOSS QMP driver and bindings
* Add power domains for MSM8998 and QCS404 in QCOM RPMPD
* Add corner macros, max state support, and fixups for setting performance state
for Qcom RPMPD
* tag 'qcom-drivers-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: geni: Add support for ACPI
MAINTAINERS: Remove myself as qcom maintainer
soc: qcom: apr: Don't use reg for domain id
soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
soc: qcom: Add AOSS QMP driver
dt-bindings: soc: qcom: Add AOSS QMP binding
qcom: apr: Make apr callbacks in non-atomic context
soc: qcom: rpmpd: Add MSM8998 power-domains
dt-bindings: power: Add rpm power domain bindings for msm8998
soc: qcom: rpmpd: Add QCS404 power-domains
dt-bindings: power: Add rpm power domain bindings for qcs404
soc: qcom: rpmpd: Modify corner defining macros
soc: qcom: rpmpd: Add support to set rpmpd state to max
soc: qcom: rpmpd: fixup rpmpd set performance state
MAINTAINER: Fix Qualcomm ETHQOS ethernet DT file
MAINTAINERS: fix typo in file name
Signed-off-by: Olof Johansson <olof@lixom.net>
When booting with ACPI as the active set of configuration tables,
all; clocks, regulators, pin functions ect are expected to be at
their ideal values/levels/rates, thus the associated frameworks
are unavailable. Ensure calls to these APIs are shielded when
ACPI is enabled.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
When booting with ACPI as the active set of configuration tables,
all; clocks, regulators, pin functions ect are expected to be at
their ideal values/levels/rates, thus the associated frameworks
are unavailable. Ensure calls to these APIs are shielded when
ACPI is enabled.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The reg property represents the address and size on the bus that a
device lives, but for APR the parent is a rpmsg bus, which does not have
numerical addresses. Simply defining #address/#size-cells to 1 and 0,
respectively, to silence the compiler is not an appropriate solution.
Replace the use of "reg" with an APR specific property.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix Kconfig warning and subsequent build errors that are caused
when PM_GENERIC_DOMAINS=y but CONFIG_PM is not set/enabled.
WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS
Depends on [n]: PM [=n]
Selected by [m]:
- QCOM_AOSS_QMP [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) && MAILBOX [=y] && COMMON_CLK [=y]
Fixes these build errors:
../drivers/base/power/domain.c: In function ‘genpd_queue_power_off_work’:
../drivers/base/power/domain.c:485:13: error: ‘pm_wq’ undeclared (first use in this function)
queue_work(pm_wq, &genpd->power_off_work);
../drivers/base/power/domain.c:485:13: note: each undeclared identifier is reported only once for each function it appears in
../drivers/base/power/domain.c: In function ‘genpd_dev_pm_qos_notifier’:
../drivers/base/power/domain.c:675:25: error: ‘struct dev_pm_info’ has no member named ‘ignore_children’
if (!dev || dev->power.ignore_children)
../drivers/base/power/domain.c: In function ‘rtpm_status_str’:
../drivers/base/power/domain.c:2754:16: error: ‘struct dev_pm_info’ has no member named ‘runtime_error’
if (dev->power.runtime_error)
../drivers/base/power/domain.c:2756:21: error: ‘struct dev_pm_info’ has no member named ‘disable_depth’
else if (dev->power.disable_depth)
../drivers/base/power/domain.c:2758:21: error: ‘struct dev_pm_info’ has no member named ‘runtime_status’
else if (dev->power.runtime_status < ARRAY_SIZE(status_lookup))
../drivers/base/power/domain.c:2759:31: error: ‘struct dev_pm_info’ has no member named ‘runtime_status’
p = status_lookup[dev->power.runtime_status];
../drivers/base/power/domain_governor.c: In function ‘default_suspend_ok’:
../drivers/base/power/domain_governor.c:82:17: error: ‘struct dev_pm_info’ has no member named ‘ignore_children’
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Always On Subsystem (AOSS) Qualcomm Messaging Protocol (QMP) driver
is used to communicate with the AOSS for certain side-channel requests,
that are not available through the RPMh interface.
The communication is a very simple synchronous mechanism of messages
being written in message RAM and a doorbell in the AOSS is rung. As the
AOSS has processed the message length is cleared and an interrupt is
fired by the AOSS as acknowledgment.
The driver exposes the QDSS clock as a clock and the low-power state
associated with the remoteprocs in the system as a set of power-domains.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
APR communication with DSP is not atomic in nature.
Its request-response type. Trying to pretend that these are atomic
and invoking apr client callbacks directly under atomic/irq context has
endless issues with soundcard. It makes more sense to convert these
to nonatomic calls. This also coverts all the dais to be nonatomic.
All the callbacks are now invoked as part of rx work queue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license rev 2 and only
rev 2 as published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 2 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190112.583753585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the shared cx/mx and sensor sub-system's cx and mx
power-domains found on MSM8998.
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add the shared cx/mx and the low-power-island's cx and mx power-domains
found on QCS404.
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[sibi: Fixup corner/vfc with vlfl/vfl]
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
QCS404 uses individual resource type magic for each power-domain, so
adjust the macros slightly to make them reusable for this.
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[sibi: Extend rpmpd corner pair to a generic rpmpd pair]
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
rpmpd max state varies across SoCs and SoC families, add support
in the driver to make it SoC/SoC family specific
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Remoteproc q6v5-mss calls set_performance_state with INT_MAX on
rpmpd. This is currently ignored since it is greater than the
max supported state. Fixup rpmpd state to max if the required
state is greater than all the supported states.
Fixes: 075d3db8d1 ("soc: qcom: rpmpd: Add support for get/set performance state")
Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return index value from bitmap_find_next_zero_area can be higher
than available slot. So correct the check to return error in such case.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The memremap() function doesn't return error pointers, it returns NULL.
This code is returning "ret = PTR_ERR(NULL);" which is success, but it
should return -ENOMEM.
Fixes: 312416d917 ("drivers: qcom: add command DB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Current QMI clients are not userspace facing, if their threads are
signaled, they do not do any signal checking or propagate the
ERESTARTSYS return code up. Remove the interruptible option so clients
can finish their QMI transactions even if the thread is signaled.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This change adds mmap functionality to rmtfs_mem driver.
Userspace application can map the address and use this
mapped address directly as buffer for read/write call to disk.
and avoid the read/write call to the shared path to copy the
buffer to userspace application.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Ankit Jain <jankit@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes typos in the llcc-slice driver.
Fixes: 72d1cd0331 ("qcom: soc: llcc-slice: Clear the global drv_data pointer on error")
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Make the code a little bit clearer (and use less gotos)
by consolidating some of the initialization.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Currently the data structure for llc-slice is devm allocated and
stored as a global but never cleared if the probe function fails.
This is a problem because devm managed memory gets freed on probe
failure the API functions could access the pointer after it has been
freed.
Initialize the drv_data pointer to an error and reset it to an error
on probe failure or device destroy and add protection to the API
functions to make sure the memory doesn't get accessed.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the compatible for the RPM in SDM660, so that rpm resources can be
made available.
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
If of_platform_populate() fails in gsbi_probe(),
gsbi->hclk is left undisabled.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Using the batch API from the interconnect driver sometimes leads to a
KASAN error due to an access to freed memory. This is easier to trigger
with threadirqs on the kernel commandline.
BUG: KASAN: use-after-free in rpmh_tx_done+0x114/0x12c
Read of size 1 at addr fffffff51414ad84 by task irq/110-apps_rs/57
CPU: 0 PID: 57 Comm: irq/110-apps_rs Tainted: G W 4.19.10 #72
Call trace:
dump_backtrace+0x0/0x2f8
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0xcc/0x10c
print_address_description+0x74/0x240
kasan_report+0x250/0x26c
__asan_report_load1_noabort+0x20/0x2c
rpmh_tx_done+0x114/0x12c
tcs_tx_done+0x450/0x768
irq_forced_thread_fn+0x58/0x9c
irq_thread+0x120/0x1dc
kthread+0x248/0x260
ret_from_fork+0x10/0x18
Allocated by task 385:
kasan_kmalloc+0xac/0x148
__kmalloc+0x170/0x1e4
rpmh_write_batch+0x174/0x540
qcom_icc_set+0x8dc/0x9ac
icc_set+0x288/0x2e8
a6xx_gmu_stop+0x320/0x3c0
a6xx_pm_suspend+0x108/0x124
adreno_suspend+0x50/0x60
pm_generic_runtime_suspend+0x60/0x78
__rpm_callback+0x214/0x32c
rpm_callback+0x54/0x184
rpm_suspend+0x3f8/0xa90
pm_runtime_work+0xb4/0x178
process_one_work+0x544/0xbc0
worker_thread+0x514/0x7d0
kthread+0x248/0x260
ret_from_fork+0x10/0x18
Freed by task 385:
__kasan_slab_free+0x12c/0x1e0
kasan_slab_free+0x10/0x1c
kfree+0x134/0x588
rpmh_write_batch+0x49c/0x540
qcom_icc_set+0x8dc/0x9ac
icc_set+0x288/0x2e8
a6xx_gmu_stop+0x320/0x3c0
a6xx_pm_suspend+0x108/0x124
adreno_suspend+0x50/0x60
cr50_spi spi5.0: SPI transfer timed out
pm_generic_runtime_suspend+0x60/0x78
__rpm_callback+0x214/0x32c
rpm_callback+0x54/0x184
rpm_suspend+0x3f8/0xa90
pm_runtime_work+0xb4/0x178
process_one_work+0x544/0xbc0
worker_thread+0x514/0x7d0
kthread+0x248/0x260
ret_from_fork+0x10/0x18
The buggy address belongs to the object at fffffff51414ac80
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 260 bytes inside of
512-byte region [fffffff51414ac80, fffffff51414ae80)
The buggy address belongs to the page:
page:ffffffbfd4505200 count:1 mapcount:0 mapping:fffffff51e00c680 index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 ffffffbfd4529008 ffffffbfd44f9208 fffffff51e00c680
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
fffffff51414ac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fffffff51414ad00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>fffffff51414ad80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
fffffff51414ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fffffff51414ae80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
The batch API sets the same completion for each rpmh message that's sent
and then loops through all the messages and waits for that single
completion declared on the stack to be completed before returning from
the function and freeing the message structures. Unfortunately, some
messages may still be in process and 'stuck' in the TCS. At some later
point, the tcs_tx_done() interrupt will run and try to process messages
that have already been freed at the end of rpmh_write_batch(). This will
in turn access the 'needs_free' member of the rpmh_request structure and
cause KASAN to complain. Furthermore, if there's a message that's
completed in rpmh_tx_done() and freed immediately after the complete()
call is made we'll be racing with potentially freed memory when
accessing the 'needs_free' member:
CPU0 CPU1
---- ----
rpmh_tx_done()
complete(&compl)
wait_for_completion(&compl)
kfree(rpm_msg)
if (rpm_msg->needs_free)
<KASAN warning splat>
Let's fix this by allocating a chunk of completions for each message and
waiting for all of them to be completed before returning from the batch
API. Alternatively, we could wait for the last message in the batch, but
that may be a more complicated change because it looks like
tcs_tx_done() just iterates through the indices of the queue and
completes each message instead of tracking the last inserted message and
completing that first.
Fixes: c8790cb6da ("drivers: qcom: rpmh: add support for batch RPMH request")
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Fix the redundant call being made to send the sleep and wake requests
immediately to the controller.
As per the patch [1], the sleep and wake request votes are cached in
rpmh controller and sent during rpmh_flush(). These requests needs to be
sent only during entry of deeper system low power modes or suspend.
[1] https://patchwork.kernel.org/patch/10477533/
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
In order to run an rmtfs daemon as an unprivileged user, that user would
need access to the phys_addr and size sysfs attributes. Sharing these
attributes with unprivileged users doesn't really leak anything
sensitive, since if you have access to physical memory, the jig is
up anyway.
Make those attributes readable by all.
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Currently the qcom_rmtfs_memN devices are entirely invisible to the udev world.
Add a class to the rmtfs device so that uevents fire when the device is added.
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Since QCOM_RPMPD is bool and it depends on QCOM_SMD_RPM
which is tristate, configurations such as arm64:allmodconfig
result in
CONFIG_QCOM_RPMPD=y
CONFIG_QCOM_SMD_RPM=m
This in turn results in
drivers/soc/qcom/rpmpd.o: In function `rpmpd_send_corner':
rpmpd.c:(.text+0x10c): undefined reference to `qcom_rpm_smd_write'
drivers/soc/qcom/rpmpd.o: In function `rpmpd_power_on':
rpmpd.c:(.text+0x3b4): undefined reference to `qcom_rpm_smd_write'
drivers/soc/qcom/rpmpd.o: In function `rpmpd_power_off':
rpmpd.c:(.text+0x520): undefined reference to `qcom_rpm_smd_write'
make: *** [vmlinux] Error 1
Fix it by making QCOM_RPMPD depend on QCOM_SMD_RPM=y
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The MFD_QCOM_RPM is the RPM in family A, but the rpmpd driver only implements
support for SMD based devices. Drop the dependency and remove includes of the
family A headers. No functional change.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Specify the active + sleep and active-only MX power domains as
the parents of the corresponding CX power domains. This will ensure that
performance state requests on CX automatically generate equivalent requests
on MX power domains.
This is used to enforce a requirement that exists for various
hardware blocks on SDM845 that MX performance state >= CX performance
state for a given operating frequency.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The RPMh power domain driver aggregates the corner votes from various
consumers for the ARC resources and communicates it to RPMh.
With RPMh we use 2 different numbering space for corners, one used
by the clients to express their performance needs, and another used
to communicate to RPMh hardware.
The clients express their performance requirements using a sparse
numbering space which are mapped to meaningful levels like RET, SVS,
NOMINAL, TURBO etc which then get mapped to another number space
between 0 and 15 which is communicated to RPMh. The sparse number space,
also referred to as vlvl is mapped to the continuous number space of 0
to 15, also referred to as hlvl, using command DB.
Some power domain clients could request a performance state only while
the CPU is active, while some others could request for a certain
performance state all the time regardless of the state of the CPU.
We handle this by internally aggregating the votes from both type of
clients and then send the aggregated votes to RPMh.
There are also 3 different types of votes that are comunicated to RPMh
for every resource.
1. ACTIVE_ONLY:
This specifies the requirement for the resource when the CPU is
active
2. SLEEP:
This specifies the requirement for the resource when the CPU is
going to sleep
3. WAKE_ONLY:
This specifies the requirement for the resource when the CPU is
coming out of sleep to active state
We add data for all power domains on sdm845 SoC as part of the patch.
The driver can be extended to support other SoCs which support RPMh
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add support for the .set_performace_state() and .opp_to_performance_state()
callbacks in the rpmpd driver.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The Power domains for corners just pass the performance state set by the
consumers to the RPM (Remote Power manager) which then takes care
of setting the appropriate voltage on the corresponding rails to
meet the performance needs.
We add all power domain data needed on msm8996 here. This driver can easily
be extended by adding data for other qualcomm SoCs as well.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds a compatible for the rpm on the Qualcomm QCS404 platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Let's change the function signature to return the pointer to memory or
an error pointer on failure, and take an argument that lets us return
the size of the aux data read. This way we can remove the
cmd_db_read_aux_data_len() API entirely and also get rid of the memcpy
operation from cmd_db to the caller. Updating the only user of this code
shows that making this change allows us to remove a function and put the
lookup where the user is.
Cc: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The cmd_db_get_header() function is a static local function that doesn't
need to copy anything from one place to another. Instead, it can just
point into the region by returning pointers to what we're looking for.
If we do that, we should mark what we're returning as const so that code
can't modify cmd-db without an obvious cast.
Cc: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Stephen Boyd