The "ring->addr = addr;" assignment is done a few lines later so we
can't use "ring->addr" yet. The correct dma_handle is "addr".
Fixes: 650d160382 ("soc: qcom: ipa: the generic software interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/YBjpTU2oejkNIULT@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ
is set and interrupt is shared, then free_irq() creates an "artificial"
interrupt by calling the interrupt handler. The "link change" flag is set
in the interrupt status register, causing phylib to eventually call
phy_suspend(). Because the net_device is detached from the PHY already,
the PHY driver can't recognize that WoL is configured and powers down the
PHY.
Fixes: f1e911d5d0 ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/fe732c2c-a473-9088-3974-df83cfbd6efd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot found WARNING in rds_rdma_extra_size [1] when RDS_CMSG_RDMA_ARGS
control message is passed with user-controlled
0x40001 bytes of args->nr_local, causing order >= MAX_ORDER condition.
The exact value 0x40001 can be checked with UIO_MAXIOV which is 0x400.
So for kcalloc() 0x400 iovecs with sizeof(struct rds_iovec) = 0x10
is the closest limit, with 0x10 leftover.
Same condition is currently done in rds_cmsg_rdma_args().
[1] WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
alloc_pages include/linux/gfp.h:547 [inline]
kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
kmalloc_array include/linux/slab.h:592 [inline]
kcalloc include/linux/slab.h:621 [inline]
rds_rdma_extra_size+0xb2/0x3b0 net/rds/rdma.c:568
rds_rm_size net/rds/send.c:928 [inline]
Reported-by: syzbot+1bd2b07f93745fa38425@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/20210201203233.1324704-1-snovitoll@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Last TCAM data contains TCAM enable bit.
It should be written after SRAM data before entry enabled.
Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1612172139-28343-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sending a packet, we will prepend it with an LAPB header.
This modifies the shared parts of a cloned skb, so we should copy the
skb rather than just clone it, before we prepend the header.
In "Documentation/networking/driver.rst" (the 2nd point), it states
that drivers shouldn't modify the shared parts of a cloned skb when
transmitting.
The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called
when an skb is being sent, clones the skb and sents the clone to
AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte
pseudo-header before handing over the skb to us, if we don't copy the
skb before prepending the LAPB header, the first byte of the packets
received on AF_PACKET sockets can be corrupted.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20210201055706.415842-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- station rate tables were not updated correctly
after association, leading to bad configuration
- rtl8723bs (staging) was initializing data incorrectly
after the previous fix and needed to move the init
later
-----BEGIN PGP SIGNATURE-----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=mEgj
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two fixes:
- station rate tables were not updated correctly
after association, leading to bad configuration
- rtl8723bs (staging) was initializing data incorrectly
after the previous fix and needed to move the init
later
* tag 'mac80211-for-net-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
staging: rtl8723bs: Move wiphy setup to after reading the regulatory settings from the chip
mac80211: fix station rate table updates on assoc
====================
Link: https://lore.kernel.org/r/20210202143505.37610-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of failure in tc update skb the packet is dropped
without freeing the skb.
Fixed by freeing the skb in case failure in tc update skb.
Fixes: d6d2778286 ("net/mlx5: E-Switch, Restore chain id on miss")
Fixes: c756909722 ("net/mlx5e: Add tc chains offload support for nic flows")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
max_opened_tc is used for stats, so that potentially non-zero stats
won't disappear when num_tc decreases. However, mlx5e_setup_tc_mqprio
fails to update it in the flow where channels are closed.
This commit fixes it. The new value of priv->channels.params.num_tc is
always checked on exit. In case of errors it will just be the old value,
and in case of success it will be the updated value.
Fixes: 05909babce ("net/mlx5e: Avoid reset netdev stats on configuration changes")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When creation of a new rule that requires allocation of an FTE fails,
need to call to tree_put_node on the FTE in order to release its'
resource.
Fixes: cefc23554f ("net/mlx5: Fix FTE cleanup")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The function calculation always results in a value of 0. This works
generally, but when the release all pages feature is enabled it will
result in crashes.
Fixes: 0aa128475d ("net/mlx5: Maintain separate page trees for ECPF and PF functions")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-02-01
This series contains updates to igc and i40e drivers.
Kai-Heng Feng fixes igc to report unknown speed and duplex during suspend
as an attempted read will cause errors.
Kevin Lo sets the default value to -IGC_ERR_NVM instead of success for
writing shadow RAM as this could miss a timeout. Also propagates the return
value for Flow Control configuration to properly pass on errors for igc.
Aleksandr reverts commit 2ad1274fa3 ("i40e: don't report link up for a VF
who hasn't enabled queues") as this can cause link flapping.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Revert "i40e: don't report link up for a VF who hasn't enabled queues"
igc: check return value of ret_val in igc_config_fc_after_link_up
igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr
igc: Report speed and duplex as unknown when device is runtime suspended
====================
Link: https://lore.kernel.org/r/20210201214618.852831-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lijun Pan says:
====================
rework the memory barrier for SCRQ entry
This series rework the memory barrier for SCRQ (Sub-Command-Response
Queue) entry.
====================
Link: https://lore.kernel.org/r/20210130011905.1485-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rmb() can be removed since:
1. pending_scrq() has dma_rmb() at the function end;
2. dma_rmb(), though weaker, is enough here.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Dwip Banerjee <dnbanerg@us.ibm.com>
Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the dma_rmb() between pending_scrq() and ibmvnic_next_scrq()
into the end of pending_scrq() to save the duplicated code since
this dma_rmb will be used 3 times.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UDP/IP header of UDP GROed frag_skbs are not updated even after NAT
forwarding. Only the header of head_skb from ip_finish_output_gso ->
skb_gso_segment is updated but following frag_skbs are not updated.
A call path skb_mac_gso_segment -> inet_gso_segment ->
udp4_ufo_fragment -> __udp_gso_segment -> __udp_gso_segment_list
does not try to update UDP/IP header of the segment list but copy
only the MAC header.
Update port, addr and check of each skb of the segment list in
__udp_gso_segment_list. It covers both SNAT and DNAT.
Fixes: 9fd1ff5d2a (udp: Support UDP fraglist GRO/GSO.)
Signed-off-by: Dongseok Yi <dseok.yi@samsung.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://lore.kernel.org/r/1611962007-80092-1-git-send-email-dseok.yi@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev->hard_header_len for tunnel interface is set only when header_ops
are set too and already contains full overhead of any tunnel encapsulation.
That's why there is not need to use this overhead twice in mtu calc.
Fixes: fdafed4599 ("ip_gre: set dev->hard_header_len and dev->needed_headroom properly")
Reported-by: Slava Bacherikov <mail@slava.cc>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1611959267-20536-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are multiple similar bugs implicitly introduced by the
commit c0cfa2d8a7 ("vsock: add multi-transports support") and
commit 6a2c096210 ("vsock: prevent transport modules unloading").
The bug pattern:
[1] vsock_sock.transport pointer is copied to a local variable,
[2] lock_sock() is called,
[3] the local variable is used.
VSOCK multi-transport support introduced the race condition:
vsock_sock.transport value may change between [1] and [2].
Let's copy vsock_sock.transport pointer to local variables after
the lock_sock() call.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20210201084719.2257066-1-alex.popov@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for Connect-X6DX Software steering
This series adds SW Steering support for Connect-X6DX.
Since the STE and actions formats are different on this new HW,
we implemented the HW specific STEv1 layer on the infrastructure
implemented in previous mlx5 DR patchset to support all the
functionalities as previous devices.
Most of the code in this series very is low level HW specific, we
implement the function pointers for the generic SW steering layer.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmAUwK8ACgkQSD+KveBX
+j61CAgAnNwFuk8PQjdU6TR+nlPl0oQ0mVUIyWvP8giuyXPxTFLxo8wJVKnh9tfB
JFHgaEzOXhdE6n3+/vknlN/NsFUpt6Kbg2cBXc65btEKKCdcm/D3Db45TUwu0o3d
HE5cEWnJm/Qqvy7JvoVpzbNDcNh91AIdpWt95AxRYBFgWbcKvyz/Bq+DSb22grYz
bSU2HMKZKpXtHbxOV0BsZ9b2si6hpIMKRXIofT3F5yVmx6t8M174NmD4u2h6VVaa
v7dvZp7ItbnD61iJnKRLa3zftBptifDB/2wsei3W4wmfdAA1Uw9B2tPNJKboxMSa
8hWiBWE6U72rG6uz4fWd9V0mgkELXA==
=CTbF
-----END PGP SIGNATURE-----
Merge tag 'mlx5-dr-2021-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-dr-2021-01-29
Add support for Connect-X6DX Software steering
This series adds SW Steering support for Connect-X6DX.
Since the STE and actions formats are different on this new HW,
we implemented the HW specific STEv1 layer on the infrastructure
implemented in previous mlx5 DR patchset to support all the
functionalities as previous devices.
Most of the code in this series very is low level HW specific, we
implement the function pointers for the generic SW steering layer.
* tag 'mlx5-dr-2021-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: DR, Allow SW steering for sw_owner_v2 devices
net/mlx5: DR, Copy all 64B whenever replacing STE in the head of miss-list
net/mlx5: DR, Use HW specific logic API when writing STE
net/mlx5: DR, Use the right size when writing partial STE into HW
net/mlx5: DR, Add STEv1 modify header logic
net/mlx5: DR, Add STEv1 action apply logic
net/mlx5: DR, Add STEv1 setters and getters
net/mlx5: DR, Allow native protocol support for HW STEv1
net/mlx5: DR, Add HW STEv1 match logic
net/mlx5: DR, Add match STEv1 structs to ifc
net/mlx5: DR, Fix potential shift wrapping of 32-bit value
====================
Link: https://lore.kernel.org/r/20210130022618.317351-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Returning -EBUSY in ibmvnic_remove() does not actually hold the
removal procedure since driver core doesn't care for the return
value (see __device_release_driver() in drivers/base/dd.c
calling dev->bus->remove()) though vio_bus_remove
(in arch/powerpc/platforms/pseries/vio.c) records the
return value and passes it on. [1]
During the device removal precedure, checking for resetting
bit is dropped so that we can continue executing all the
cleanup calls in the rest of the remove function. Otherwise,
it can cause latent memory leaks and kernel crashes.
[1] https://lore.kernel.org/linuxppc-dev/20210117101242.dpwayq6wdgfdzirl@pengutronix.de/T/#m48f5befd96bc9842ece2a3ad14f4c27747206a53
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 7d7195a026 ("ibmvnic: Do not process device remove during device reset")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20210129043402.95744-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kurt Kanzenbach says:
====================
net: dsa: hellcreek: Report tables sizes
Florian, Andrew and Vladimir suggested at some point to use devlink for
reporting tables, features and debugging counters instead of using debugfs and
printk.
So, start by reporting the VLAN and FDB table sizes.
====================
Link: https://lore.kernel.org/r/20210130135934.22870-1-kurt@kmk-computers.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the FDB table size and occupancy via devlink. The actual size depends on
the used Hellcreek version:
|root@tsn:~# devlink resource show platform/ff240000.switch
|platform/ff240000.switch:
| name VLAN size 4096 occ 2 unit entry dpipe_tables none
| name FDB size 256 occ 6 unit entry dpipe_tables none
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VLAN membership configuration is cached in software already. So, it can be
reported via devlink. Add support for it:
|root@tsn:~# devlink resource show platform/ff240000.switch
|platform/ff240000.switch:
| name VLAN size 4096 occ 4 unit entry dpipe_tables none
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Having multiple destination ports for a unicast address does not make
sense.
Make port_db_load_purge override existent unicast portvec instead of
adding a new port bit.
Fixes: 8847293992 ("net: dsa: mv88e6xxx: handle multiple ports in ATU")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20210130134334.10243-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 2ad1274fa3
VF queues were not brought up when PF was brought up after being
downed if the VF driver disabled VFs queues during PF down.
This could happen in some older or external VF driver implementations.
The problem was that PF driver used vf->queues_enabled as a condition
to decide what link-state it would send out which caused the issue.
Remove the check for vf->queues_enabled in the VF link notify.
Now VF will always be notified of the current link status.
Also remove the queues_enabled member from i40e_vf structure as it is
not used anymore. Otherwise VNF implementation was broken and caused
a link flap.
The original commit was a workaround to avoid breaking existing VFs though
it's really a fault of the VF code not the PF. The commit should be safe to
revert as all of the VFs we know of have been fixed. Also, since we now
know there is a related bug in the workaround, removing it is preferred.
Fixes: 2ad1274fa3 ("i40e: don't report link up for a VF who hasn't enabled")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmAYI7AACgkQCF8+vY7k
4RWSng//U8Py94ciH75STf5c+MunvhigV1q/+DrRkZJ+latPyp4t3mzUsHJGDeOr
dy3UPe34FsmYBQ5m7aVpy05Or6EZvLeIB9UaplcEi0+Nfp2FUKkN2ij9YPWHuarR
kGiREpoPQ+LUldq38H7Y2qQCjzb7WrQzXYFB1WhSVM81BPRfC9FZl1gHCTzfNaol
8Cvxna2DsJN0MAB1CcHW4F8F73RWb6iQZyDB7dWzdunsHRbg5X/WXsEXOhCP7BMB
B/1yYYxjVDNe9IU9SlsOq583sDU1IFLOcw08nzuSjz40N0OpD5Pb0hnT+8wfZKz2
EtZtNFCk6VPj0eLc5+EzjcD8Z5PxlgMDeTk/qWKZXqdnWKZwM/i21q+qh4X3RaY0
qMQf8wFAEBYG15JvLMFOopsBusiyJCJJyOCGxIKidUf4bTawDLQ8HZm93czy0tMf
A086nxQiFFLjy9VM3sfgqYYEhCAYR2IQOcci/tQZFAb6fsh7FX7WyU5SO4GLQ0OF
7K1hJKIf8YHjM59aHDjFk0Tc2OeYp3Wbmecc7VLUOYAikZ4R5XENcWEz/v91PSe7
4dMySH6z0mIKhKLioUhfugQjHym923VQOJymunqdmuhPLm9SauczSnY35kdlvMFS
wQzdhZZTV0ag6VjdgEozYKaoGfC4FXY0FxLhzvz3cyazZ0/3GDE=
=eCIK
-----END PGP SIGNATURE-----
Merge tag 'media/v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"The rockship rkisp1 driver will be promoted from staging in 5.11.
While not too late, do a few uAPI changes which are needed to better
support its functionalities"
* tag 'media/v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rockchip: rkisp1: extend uapi array sizes
media: rockchip: rkisp1: carry ip version information
media: rockchip: rkisp1: reduce number of histogram grid elements in uapi
media: rkisp1: stats: mask the hist_bins values
media: rkisp1: stats: remove a wrong cast to u8
media: rkisp1: uapi: change hist_bins array type from __u16 to __u32
Commit 81f153faac ("staging: rtl8723bs: fix wireless regulatory API
misuse") moved the wiphy_apply_custom_regulatory() call to earlier in the
driver's init-sequence, so that it gets called before wiphy_register().
But at this point in time the eFuses which code the regulatory-settings
for the chip have not been read by the driver yet, causing
_rtw_reg_apply_flags() to set the IEEE80211_CHAN_DISABLED flag on *all*
channels.
On the device where I initially tested the fix, a Jumper EZpad 7 tablet,
this does not cause any problems because shortly after init the
rtw_reg_notifier() gets called fixing things up. I guess this happens
into response to receiving a (broadcast) packet with regulatory info
from the access-point ?
But on another device with a RTL8723BS wifi chip, an Acer Switch 10E
(SW3-016), the rtw_reg_notifier() never gets called. I assume that some
fuse has been set on this device to ignore regulatory info received from
access-points.
This means that on the Acer the driver is stuck in a state with all
channels disabled, leading to non working Wifi.
We cannot move the wiphy_apply_custom_regulatory() call back, because
that call must be made before the wiphy_register() call.
Instead move the entire rtw_wdev_alloc() call to after the Efuses have
been read, fixing all channels being disabled in the initial channel-map.
Fixes: 81f153faac ("staging: rtl8723bs: fix wireless regulatory API misuse")
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210201152956.370186-2-hdegoede@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check return value from ret_val to make error check actually work.
Fixes: 4eb8080143 ("igc: Add setup link functionality")
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch sets the default return value to -IGC_ERR_NVM in
igc_write_nvm_srwr. Without this change it wouldn't lead to a shadow RAM
write EEWR timeout.
Fixes: ab40561268 ("igc: Add NVM support")
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If the driver uses .sta_add, station entries are only uploaded after the sta
is in assoc state. Fix early station rate table updates by deferring them
until the sta has been uploaded.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210201083324.3134-1-nbd@nbd.name
[use rcu_access_pointer() instead since we won't dereference here]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- handle boolean device properties imported from Apple firmware
correctly.
-----BEGIN PGP SIGNATURE-----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=jRKO
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Borislav Petkov:
"A single fix from Lukas: handle boolean device properties imported
from Apple firmware correctly"
* tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/apple-properties: Reinstate support for boolean properties
toolchains which do not generate section symbols anymore. And a cleanup
ontop.
-----BEGIN PGP SIGNATURE-----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=VV7d
-----END PGP SIGNATURE-----
Merge tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single fix for objtool to generate proper unwind info for newer
toolchains which do not generate section symbols anymore. And a
cleanup ontop.
This was originally going to go during the next merge window but
people can already trigger a build error with binutils-2.36 which
doesn't emit section symbols - something which objtool relies on - so
let's expedite it"
* tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument
x86/entry: Emit a symbol for register restoring thunk
the recent UIP handling changes the time readout of non-existent RTCs hangs
forever as the read returns always 0xFF which means the UIP bit is
set. Sanity check the RTC before registering by checking the RTC_VALID
register for correctness.
-----BEGIN PGP SIGNATURE-----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=Q1FX
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix for handling advertised, but non-existent 146818 RTCs correctly.
With the recent UIP handling changes the time readout of non-existent
RTCs hangs forever as the read returns always 0xFF which means the UIP
bit is set.
Sanity check the RTC before registering by checking the RTC_VALID
register for correctness"
* tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtc: mc146818: Detect and handle broken RTCs
condition wrong when moving SYSCALL_EMU away from TIF flags.
-----BEGIN PGP SIGNATURE-----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=WMj1
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull single stepping fix from Thomas Gleixner:
"A single fix for the single step reporting regression caused by
getting the condition wrong when moving SYSCALL_EMU away from TIF
flags"
[ There's apparently another problem too, fix pending ]
* tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Unbreak single step reporting behaviour
One fix for a bug in our soft interrupt masking, which could lead to interrupt
replaying recursing, causing spurious interrupts.
Thanks to:
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=hC+4
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a bug in our soft interrupt masking, which could lead to
interrupt replaying recursing, causing spurious interrupts.
Thanks to Nicholas Piggin"
* tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt
Pull i2c fix from Wolfram Sang:
"Just one I2C driver update this time"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: Move suspend and resume handling to NOIRQ phase
Pull LED fixes from Pavel Machek:
"This pull is due to 'leds: trigger: fix potential deadlock with
libata' -- people find the warn annoying.
It also contains new driver and two trivial fixes"
* 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: rt8515: Add Richtek RT8515 LED driver
dt-bindings: leds: Add DT binding for Richtek RT8515
leds: trigger: fix potential deadlock with libata
leds: leds-ariel: convert comma to semicolon
leds: leds-lm3533: convert comma to semicolon
Highlights include:
Bugfixes:
- SUNRPC: Handle 0 length opaque XDR object data properly
- Fix a layout segment leak in pnfs_layout_process()
- pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
- pNFS/NFSv4: Improve rejection of out-of-order layouts
- pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
-----BEGIN PGP SIGNATURE-----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=gLzv
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- SUNRPC: Handle 0 length opaque XDR object data properly
- Fix a layout segment leak in pnfs_layout_process()
- pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
- pNFS/NFSv4: Improve rejection of out-of-order layouts
- pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
* tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Handle 0 length opaque XDR object data properly
SUNRPC: Move simple_get_bytes and simple_get_netobj into private header
pNFS/NFSv4: Improve rejection of out-of-order layouts
pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
This adds a driver for the Richtek RT8515 dual channel
torch/flash white LED driver.
This LED driver is found in some mobile phones from
Samsung such as the GT-S7710 and GT-I8190.
A V4L interface is added.
We do not have a proper datasheet for the RT8515 but
it turns out that RT9387A has a public datasheet and
is essentially the same chip. We designed the driver
in accordance with this datasheet. The day someone
needs to drive a RT9387A this driver can probably
easily be augmented to handle that chip too.
Sakari Ailus, Pavel Machek and Andy Shevchenko helped
significantly in getting this driver right.
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: linux-media@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
We have the following potential deadlock condition:
========================================================
WARNING: possible irq lock inversion dependency detected
5.10.0-rc2+ #25 Not tainted
--------------------------------------------------------
swapper/3/0 just changed the state of lock:
ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200
but this lock took another, HARDIRQ-READ-unsafe lock in the past:
(&trig->leddev_list_lock){.+.?}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&trig->leddev_list_lock);
local_irq_disable();
lock(&host->lock);
lock(&trig->leddev_list_lock);
<Interrupt>
lock(&host->lock);
*** DEADLOCK ***
no locks held by swapper/3/0.
the shortest dependencies between 2nd lock and 1st lock:
-> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 {
HARDIRQ-ON-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
IN-SOFTIRQ-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
kbd_bh+0x9e/0xc0
tasklet_action_common.constprop.0+0xe9/0x100
tasklet_action+0x22/0x30
__do_softirq+0xcc/0x46d
run_ksoftirqd+0x3f/0x70
smpboot_thread_fn+0x116/0x1f0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
SOFTIRQ-ON-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
INITIAL READ USE at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
}
... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10
... acquired at:
_raw_read_lock+0x42/0x90
led_trigger_blink_oneshot+0x3b/0x90
ledtrig_disk_activity+0x3c/0xa0
ata_qc_complete+0x26/0x450
ata_do_link_abort+0xa3/0xe0
ata_port_freeze+0x2e/0x40
ata_hsm_qc_complete+0x94/0xa0
ata_sff_hsm_move+0x177/0x7a0
ata_sff_pio_task+0xc7/0x1b0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
-> (&host->lock){-...}-{2:2} ops: 69 {
IN-HARDIRQ-W at:
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_bmdma_interrupt+0x27/0x200
__handle_irq_event_percpu+0xd5/0x2b0
handle_irq_event+0x57/0xb0
handle_edge_irq+0x8c/0x230
asm_call_irq_on_stack+0xf/0x20
common_interrupt+0x100/0x1c0
asm_common_interrupt+0x1e/0x40
native_safe_halt+0xe/0x10
arch_cpu_idle+0x15/0x20
default_idle_call+0x59/0x1c0
do_idle+0x22c/0x2c0
cpu_startup_entry+0x20/0x30
start_secondary+0x11d/0x150
secondary_startup_64_no_verify+0xa6/0xab
INITIAL USE at:
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_dev_init+0x54/0xe0
ata_link_init+0x8b/0xd0
ata_port_alloc+0x1f1/0x210
ata_host_alloc+0xf1/0x130
ata_host_alloc_pinfo+0x14/0xb0
ata_pci_sff_prepare_host+0x41/0xa0
ata_pci_bmdma_prepare_host+0x14/0x30
piix_init_one+0x21f/0x600
local_pci_probe+0x48/0x80
pci_device_probe+0x105/0x1c0
really_probe+0x221/0x490
driver_probe_device+0xe9/0x160
device_driver_attach+0xb2/0xc0
__driver_attach+0x91/0x150
bus_for_each_dev+0x81/0xc0
driver_attach+0x1e/0x20
bus_add_driver+0x138/0x1f0
driver_register+0x91/0xf0
__pci_register_driver+0x73/0x80
piix_init+0x1e/0x2e
do_one_initcall+0x5f/0x2d0
kernel_init_freeable+0x26f/0x2cf
kernel_init+0xe/0x113
ret_from_fork+0x1f/0x30
}
... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10
... acquired at:
__lock_acquire+0x9da/0x2370
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_bmdma_interrupt+0x27/0x200
__handle_irq_event_percpu+0xd5/0x2b0
handle_irq_event+0x57/0xb0
handle_edge_irq+0x8c/0x230
asm_call_irq_on_stack+0xf/0x20
common_interrupt+0x100/0x1c0
asm_common_interrupt+0x1e/0x40
native_safe_halt+0xe/0x10
arch_cpu_idle+0x15/0x20
default_idle_call+0x59/0x1c0
do_idle+0x22c/0x2c0
cpu_startup_entry+0x20/0x30
start_secondary+0x11d/0x150
secondary_startup_64_no_verify+0xa6/0xab
This lockdep splat is reported after:
commit e918188611 ("locking: More accurate annotations for read_lock()")
To clarify:
- read-locks are recursive only in interrupt context (when
in_interrupt() returns true)
- after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call
write_lock(&trig->leddev_list_lock) that would be blocked by CPU0
that holds trig->leddev_list_lock in read-mode
- when CPU1 (ata_ac_complete()) tries to read-lock
trig->leddev_list_lock, it would be blocked by the write-lock waiter
on CPU2 (because we are not in interrupt context, so the read-lock is
not recursive)
- at this point if an interrupt happens on CPU0 and
ata_bmdma_interrupt() is executed it will try to acquire host->lock,
that is held by CPU1, that is currently blocked by CPU2, so:
* CPU0 blocked by CPU1
* CPU1 blocked by CPU2
* CPU2 blocked by CPU0
*** DEADLOCK ***
The deadlock scenario is better represented by the following schema
(thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the
detailed explanation of the deadlock condition):
CPU 0: CPU 1: CPU 2:
----- ----- -----
led_trigger_event():
read_lock(&trig->leddev_list_lock);
<workqueue>
ata_hsm_qc_complete():
spin_lock_irqsave(&host->lock);
write_lock(&trig->leddev_list_lock);
ata_port_freeze():
ata_do_link_abort():
ata_qc_complete():
ledtrig_disk_activity():
led_trigger_blink_oneshot():
read_lock(&trig->leddev_list_lock);
// ^ not in in_interrupt() context, so could get blocked by CPU 2
<interrupt>
ata_bmdma_interrupt():
spin_lock_irqsave(&host->lock);
Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so
that no interrupt can happen in between, preventing the deadlock
condition.
Apply the same change to led_trigger_blink_setup() as well, since the
same deadlock scenario can also happen in power_supply_update_bat_leds()
-> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context),
and potentially prevent other similar usages.
Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/
Fixes: eb25cb9956 ("leds: convert IDE trigger to common disk trigger")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
-----BEGIN PGP SIGNATURE-----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=4/ty
-----END PGP SIGNATURE-----
Merge tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four cifs patches found in additional testing of the conversion to the
new mount API: three small option processing ones, and one fixing domain
based DFS referrals"
* tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix dfs domain referrals
cifs: returning mount parm processing errors correctly
cifs: fix mounts to subdirectories of target
cifs: ignore auto and noauto options if given
Two minor fixes in drivers. Both changing strings (one in a comment,
one in a module help text) with no code impact.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYBWmyCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZG0AP45cuEW
+sOml3xNPYU9QCH5i1Kfdy8epaz8MSKY37FD9QEAq/CFHshTNr8SBubCVRU9IDA8
5lSN0FPl3QiFpJfvtjE=
=ZuyI
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor fixes in drivers. Both changing strings (one in a comment,
one in a module help text) with no code impact"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit
scsi: target: iscsi: Fix typo in comment
- Cleanups on properties with standard unit suffixes
- Fix overwriting dma_range_map if there's no 'dma-ranges' property
- Fix a bug when creating a /chosen node from ARM ATAGs
- Add missing properties for TI j721e USB binding
- Several doc reference updates due to DT schema conversions
-----BEGIN PGP SIGNATURE-----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=oW7V
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Cleanups on properties with standard unit suffixes
- Fix overwriting dma_range_map if there's no 'dma-ranges' property
- Fix a bug when creating a /chosen node from ARM ATAGs
- Add missing properties for TI j721e USB binding
- Several doc reference updates due to DT schema conversions
* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Cleanup standard unit properties
of/device: Update dma_range_map only when dev has valid dma-ranges
ARM: zImage: atags_to_fdt: Fix node names on added root nodes
dt-bindings: usb: j721e: add ranges and dma-coherent props
dt-bindings:iio:adc: update adc.yaml reference
dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
ASoC: audio-graph-card: update audio-graph-card.yaml reference
Dan Carpenter